Youtube comments of (@RainmanRaysRepairs).

  1. To anyone buying a car, truck, boat or whatever... Have it inspected by a 3rd party. Pay them to check out EVERYTHING! Then you know what you're buying. A $100-$200 inspection bill is much less expensive than being stuck with problems like this. If the seller doesn't like that idea, don't buy from them. Vehicles and dealers are everywhere. Don't get suckered. Edit: found grammatical error a year later šŸ¤£šŸ¤£
    6500
  2. No engines were harmed in the making of this video. If you angrily commented before the end of the video, you have been trolled.
    2300
  3. Attention to all Jack holes that shame me for making this video, I have just one question for you.... Would you like this shit box death trap driving next to your family on the highway?
    1800
  4. Oh I know. The look folks have is painful to witness sometimes after they get bad news. I really wish high school seniors had a class that educated them on certain realities of the world. Guidance on how to manage money and make educated decisions could have saved us all a lot of grief back in the day
    1700
  5. Ok so after a couple day of Reeeeeeee comments Iā€™ll chime in. For starters, the customer said that the gauge intermittently works then quits. No! I wonā€™t do this job without pulling the intake. Iā€™m not risking straining or cutting my hands up, so I can charge 25% of the book time to do the work. I have to take care of my hands, they feed my family. If I strain a metacarpal or get cut I canā€™t earn. I didnā€™t decide to circumvent the process to ā€œpay lessā€ for a repair because google said so. I donā€™t own that. Others peopleā€™s decisions are not my problem.
    1400
  6. Disclaimer: Local Sheriffs department is aware of the situation here šŸ‘†šŸšØšŸšØšŸšØ
    1300
  7. Donā€™t do it plz. No sense in beating a dead horse
    1100
  8. You want to stop pollution? STOP buying Chinese products. China is the biggest offender!
    993
  9. šŸ˜‚ Howā€™s this new intro format working for you guys n gals?
    990
  10. Are you taking about my shop that has a lower labor price than any other shop in my area? Not to mention my pricing matrix thatā€™s less than every shop in the area. Itā€™s also no secret that I make content. We do t need to discuss the agreement clause on my work orders that grants permission to use their cars in said content. Get a grip man, my Tā€™s are dotted and my iā€™s are totally crossed
    685
  11. OK I hear everyone loud and clear about the gloves. I watched the cringe moment and I see what you're saying. Allow me to elaborate on what you see. I understand that the gloves are dirty. I had wiped them with a cloth towel before entering the very nice Mercedes. Yes, they appear dirty, and it is from staining, not oil all over the gloves. NO, I didn't leave petroleum smears all over the interior of the car. Please forgive me!
    649
  12. You're not wrong. I'm sure the engineers designed three cooling package with two separate parts. The cooler for the trans, and one condenser for the A/C. Then the bean counters got a hold of it and decided to just make it one piece to save some pennies. Then when put into the field it didn't work right due to heat transfer. So the cheap as dirt fix was to hack the end tank in half to isolate the two cores so they couldn't transfer heat between them. As a technician this is embarrassing. They expect me to install this hack ass junk and then stand by my work. It would cost money to implement a proper fix for a design flaw, so that's out of the question I suppose.
    610
  13. Glad yā€™all are liking the into. Jesse, a long time viewer made for us!
    578
  14. Hey I know..I missed an upload...everyone needs time off sometimes :)
    549
  15. We left and took everything home. The trailer is against my well house with a camper trailer on the other side. I have the well house strapped to the trailers that surround it. We will need water and I need to save the well equipment. I live in eastern manatee co and as if the posting of this video, the projected eye path is coming directly for my location. My house is specifically built to survive this event. The damage will be widespread and massive. C yā€™all on the other side of this beast! šŸ«”
    526
  16. Lots of people are just talk, and Iā€™d hope they would be willing to defend this position if challenged. I believe we all live different lives and have totally different ways of looking at the world. Debate and the exchange of ideas, are how people find common ground. We have no debate and compromise anymore. Everything is so one sided now and we measure ourselves only by how bad we piss of the opposition. I believe that sticker is divisive, and I also believe the person has the right to display it. Iā€™d defend their right to display it, even if I didnā€™t agree with it. But I would expect them to defend it too. And defending yourself takes balls.
    515
  17. I really should have used this as the title.
    510
  18. Happy Fathers Day to all the Dads out here! The world may not always show it and sometimes we may not feel it, but Dads make the world go round! Youā€™re special and valuable, the world needs more daddies!! ā¤
    494
  19. Iā€™m sorry Iā€™m still learning. Would you mind showing me how itā€™s done?
    481
  20. You guys, before you rip me for talking and not working, please watch whole video. This situation doesnā€™t apply to me specifically. I was using the circumstance as an example to give some insight on our pay system. Also it specifically applies to low skilled and semi skilled techs who donā€™t yet have the experience to beat flat rate. I donā€™t make my living doing tire work, but many do. And .2 hrs is a big deal to them.
    456
  21. This thing is coming straight for us moving East from the Gulf of Mexico. We cannot prepare any more than we already have. Weā€™re going to get through this. Take care everyone, see you after itā€™s over!
    456
  22. Doing things the hard way is my toxic trait
    452
  23. This is the last ā€œnormalā€ footage before Hurricane Milton, taken on a Friday. As this video was posted the storm ws bearing down on my location. I donā€™t know what will happen next. See yall on the other side!
    444
  24. The guy literally wrote down replace battery. Itā€™s been sitting for over a year and tasted (EDIT: tested šŸ¤£) bad. It doesnā€™t hold a charge overnight either. Totally a scam, batteries are what pays my mortgage šŸ™„
    431
  25. Iā€™m really sorry that editing isnā€™t well received in this one. I see what the video doing and I donā€™t know how it happened yet. My unloaded edit didnā€™t have the blanks and clicks between scenes. Whatever it is, Iā€™ll make sure it doesnā€™t happen again. Sorry folks šŸ˜¢
    424
  26. No Iā€™m not throwing away my gloves every time I get in. Those are expressive. Cars are gross inside and theyā€™re due my protection. Paper does not scratch paint. I used engine oil inside of the engine. Rush nothing, Iā€™m a veteran at this business. Have a great day!
    418
  27. Ā @tysonparker7403Ā  I remember my first week of posting on YouTube, it was troll after troll going ā€œbla bla blaā€ I said to myself ā€œ I must be pretty good at making videosā€ (and maybe my job too). My logic went as follows: ā€œif I suck or make bad videos, then people just wonā€™t watch, and if Iā€™m good at it, somebody will running their mouthā€ Every nasty comment just gives me fuel, because I know Iā€™m doing well! šŸ˜Ž
    401
  28. I canā€™t say it was my pleasure, because this one hurt my insides! But Iā€™m glad to be here for you!
    395
  29. Ā @conkeeperĀ  Trueā€¦ but itā€™s in the past now
    385
  30. It wasn't. An engine start wasn't attempted with the timing cover removed. I wasn't doing this job, so I didn't get loads of footage. When my guy removed the crankshaft pulley, valve spring pressure caused the valve train assembly to move out of time with the crankshaft and he didn't notice. What you see is after the job was completed and he attempted to restart which caused valve damage. The footage you see is after I came over, realized that we had a problem and removed the timing cover to recheck things. THEN I discovered we had some internal damage from pistons meeting valves.
    369
  31. Ok this is the hot topic of the whole video so allow me to explain. Do yā€™all remember the last F150 with the smoked pinion bearing? It came in making noise and I placed cams and mics on the diff and frame to catch the noise and vibe. Since the complaint was similar with this F150 I did the same thing thinking it was an axle noise. The difference is, with this F150, the driveshaft fell out. Thereā€™s no way to stage this, and I will use the rubber boot tearing as evidence to support my claim. I realize the footage is super rare in the wild, and it seems far fetched. Regarding edits, I drove around the block before the shaft fell out trying to determine what was going on with the noise complaint. The carrier bearing broke while I was driving. When I pulled in the lot is when the shaft broke in half.
    365
  32. As a Libertarian, Iā€™m šŸ‘€šŸ’€ over the bumper sticker commentsšŸ˜® Edit: Re: I'm not part of the Libertarian Party, political parties piss me off too much to be involved with one. Libertarians tend to embrace individual responsibility, oppose government bureaucracy and taxes, promote private charity, tolerate diverse lifestyles, support the free market, and defend civil liberties- Google
    362
  33. I have realized the error of my ways, the duplicate scene is being removed now. Reeeeeeeeee!!!!
    358
  34. you type too much
    354
  35. Itā€™s the dumbest thing ever. I have to have a 609 certification to handle refrigerant... but any schmuck can walk into the parts store and buy a can of R134a with the installation hose.
    336
  36. Become more disciplined, become mentally hardened, become someone who exemplifies what discipline truly is. The world at large is begging for examples of excellence, it is the individuals duty to become that example for the generations that come behind us. Personal excellence is the the ultimate rebellion. This should an obligation and a duty. Welcome to 2024 people. Get your house in order.
    332
  37. He was right about the sound however there were other issues that I found very quickly. Lack of oil in the system a 100% discharge for who knows what length of time and nobody ever discovered if and where the leak was. This is why we diagnose and evaluate systems before throwing parts at them.
    330
  38. I totally understand your point of view. Let me ask you, If I call you back and tell you that I need $200 more to splice in three connectors with solder heat shrink and wire loom, or I can zip tie it for free, what would you choose? I'm not financially responsible for things breaking off I didn't negligently cause the damage. I want to pin this comment for discussion. no hate or Reeeeeeeee. I'm curious to see how the viewers feel about this situation.
    316
  39. I bet the scam people will try it on this video soon šŸ˜‚šŸ˜‚ Theyā€™re not too bright
    308
  40. Keep a lookout for Part 2! Thanks for watching!!
    297
  41. The story of the fired employee is at 24:32
    296
  42. Ā @mattymarino2734Ā  Yea this vid got 100k views in the past two weeks. Then along came the comments. That's the YouTube algorithm for ya
    294
  43. I'm redefining the "Customer States" category. Nope, I own a Duramax. And we have a gravel overflow lot. Thanks for watching. And have a great day!
    290
  44. Ten hours of work in a one hour video..."If it's not on video, it didn't happen!"
    289
  45. And my fan club grows! šŸ¤£šŸ¤£šŸ‘
    284
  46. I missed a lug nut when doing the final torque on the wheel šŸ˜¬. So I left one at 60-ish lbs and not 100
    281
  47. Ā @scanningnycĀ  Dude cut it out. You seriously think Iā€™m doing people a disservice and then publishing it? Use your noggin.
    278
  48. I have one. ā€œRainman Ray out of the shopā€
    275
  49. Support the Channel with a Like and Subscribe! Visit https://www.RainmanRaysRepairs.com for delicious RRR COFFEE! and MORE!
    265
  50. Did you miss part 1? Click here! https://youtu.be/3w_fabntWTo Yes it happened again, I lost my thermometerā€¦again šŸ„ŗ
    262
  51. This is what happens when you park under a Live Oak in Florida.
    260
  52. Update a few hours after posting: Folks were donating to pitch in and I want to thank everyone for doing so! I'll give everything to Greg and Kristin, we're not looking to profit from this project.
    252
  53. Iā€™m libertarian. Aaand those of you who have been around here for a while, know that nothing is safe. Iā€™ll make fun of Ebola if it were the talk of the town. Weā€™re all waaaaay too serious these days and itā€™s making us hate each other over stupid crap. Remember, left or right, they ALL fancy themselves as our overlords.
    248
  54. Thatā€™s actually what we did. With the exception of the loose connector. The girl said yes to replacing the battery, then dad called and threw a fit, so I threw the junk battery back in and sent them on this way free of charge. ā€œGood luck, have a great day!ā€
    246
  55. Remember, I still canā€™t upload anything right now. YT is broken. This is an older unlisted video. Sorry for the confusion or inconvenience. Weā€™ll get back to normal after YT gets fixed!
    245
  56. Ā @scanningnycĀ  Think of how much better your comment wouldā€™ve been received if you didnā€™t accuse people of scamming other people. Even the guy that owns the car showed up to tell you that it was silly
    243
  57. NOT a Clickbait title, Iā€™m going to have to remove the tank again. Thereā€™s a detail that I forgot and I didnā€™t realize until after editing the footage. Did you spot my error? Itā€™s hard to see.
    241
  58. Iā€™m going to check into that one for sure!!!
    240
  59. John you went full dark side on that one buddyā€¦snap on warranty is a little game we play. They charge us 3x the $$ for a tool, and we warranty them till the end of time. This is why we buy things like $65 pliers. Thereā€™s no thievery here
    235
  60. Iā€™ll just move through the matrix in super high speed lightning fast motion allowing me to dodge the jeep
    222
  61. Please do not rip my head off for not removing the oil pan! I tried and the guy said no. Heā€™s going to be back and Iā€™m going to do some oil flush procedures to try and clean out the sludge. He knows the risks!
    222
  62. Ā @ptfsndsw7028Ā  I'm an honest mechanic and not broke at all. I've had six figure invoice years. I have more work than I know what to do with. I have all that because I'm honest. No need to be a crook. The work is out there.
    221
  63. @ L.A. Commander Iā€™m sure youā€™re joking, but this should make for a good thread šŸ¤£
    219
  64. Ā @fmbflaĀ  Ok bro, I'm going to attempt reply without sounding like you. Basically what you saw is what I had to work with here. No history on the truck, no explanation from the owner. I've never seen this truck in my shop prior to this day. I found a DTC and damaged sensor. Clearly someone had been there before because the retainer clip was missing from the sensor connector. If the owner had repairs done somewhere else and chooses to not share that info with me, that's not my problem, especially when I ask. I'm not a mind reader, magician or a time traveler. I don't have a crystal ball that lets me magically know everything about every vehicle that I touch. I fix what I find and move on with my day. Sounds like you've made some poor choices yourself when it comes to hiring people to work on your vehicle, and I empathasize with you on that. That doesn't mean that you have a free pass to unload on everyone in the business. Take responsibility and stop crapping on other people.
    211
  65. Here's exactly what happened when loading the trailer. Lets begin with understanding that this is a hydraulic dump trailer and the deck will tilt back when loading. I have used a chain to lock the deck down to the frame and jack stands under the rear of the trailer to prevent this hinging situation. I usually use stacks of wood to achieve this but I wanted to try the jack stands out. As the trailer took the weight it rocked foreword and back causing the jack stands to collapse and the downward momentum of the even caused the trailer to lift up on the rear of the truck negating the parking brake and allowing excessive movement, potentially causing the machine to fall off of the trailer and or flipping over . When this occurred, there was only one option...SEND IT! I'm going back to using wood stacks.
    210
  66. Forgive me, I misspoke with regards to the thousands of an inch when measuring the rotors ( I was off a decimal in my lingo) meant to sat 50 thousands not 5 thousands! REEEEEeeeeee!!
    209
  67. My company greatly understands the value of good customer service
    203
  68. šŸšØIā€™ve already made a follow up https://youtu.be/oCr20C8i6Z8 I see the comment shaming is being laid on THICK today. Allow me to add some facts of the matter to the situation. I didnā€™t melt the grease in the joint ( heat dispersed before the grease boiled) YES! It needs new control arms, NO we didnā€™t have any that day. Itā€™s better than it was and will be dealt with properly later.
    202
  69. There seems to be some confusion in this one so. I will elaborate. The steering knuckle was bent causing a wheel alignment issue. We got a used one bc a new one doesnā€™t exist. The new used part had a very rusted bearing so I decided to reuse the original bearing. However the junkyard bearing on the replacement knuckle was corroded in solid, so it got torched and hammered out. I donā€™t use a torch on aluminum Jaguar parts so the steel hub bearing got the heat. I replaced the steering knuckle and installed the original non-torched wheel bearing. The alignment spec came in perfect at - 0.3* BTW
    197
  70. Just let me try things for a minute. I assure you itā€™s not a long term thing. Iā€™m trying to learn it better so when SKYNET becomes self aware, I will know to dismantle the machines with greater efficiency. It could make all the difference I the future struggle for the survival of humanity.
    196
  71. Itā€™s awkward every time
    196
  72. I'm googling "wooden wrenches" now
    196
  73. Ā @JohnSmith-ug5ciĀ Who cares what the verbiage says. I have a good enough business relationship with my vendor that when I destroy something he replaces it. And who says welding with pliers isnā€™t abnormal use? I do this every day, it seems pretty normal to me.
    193
  74. It drained for four hours. I'm going to repair this car sometime this week. I'm make a video of everything
    187
  75. You must be new here
    177
  76. I stole ā€œtight as a tigerā€ from an Austin Powers movie. Get your facts right broham. Edit: I really donā€™t even watch other YouTube car channels except fordbossme and south main auto. And every time I steal something from Eric, he slaps me twice as hard šŸ¤£šŸ¤£
    177
  77. Since this comment thread has also gone straight to politics as well, itā€™s time for me to weigh in and nobody is going to like this oneā€¦.. Iā€™m a ā€¦ā€¦. Libertarian šŸ˜®
    174
  78. lol I know right? I had a fox body in a lift years ago ( in Michigan) left it overnight and it ā€œsankā€through the lift l points šŸ˜¬
    172
  79. Oooh thatā€™s a bad day! Lol long ago before I was married, my wife was the jealous type. I cured it by telling here that she was the biggest pain the ass that I have had! Followed up with ā€œWhy would I want two?ā€ Problem solved, we have 3 kids now.
    169
  80. My man!!! Thanks for the info. As of this morning, the trans is still on my bench and I pulled that drum back out. Sure enough I had the ring misaligned you saved the day!!!! šŸ˜ƒ
    167
  81. Ā @ptfsndsw7028Ā  You're not wrong. Keep in mind though, most folks simply don't know how to troubleshoot simple things like this. Some just don't don't care to learn or even attempt to figure things out.
    166
  82. Thanks again to everyone @bankspower! A new tip will definitely complete the installation! I have the quality, just need to finish it off with the shiny!! We had some delivery delays but the team was responsive and diligent in working it out! Much ā¤ļøā¤ļøā¤ļø Thanks again!!!!
    165
  83. I was first
    164
  84. The YouTube comments are filled with fake accounts that resemble actual creators. They act like the creator in order to draw the viewers away from youtube to another platform and develop a communion relationship with the viewer. Once trust has been established, they ask for money using several different tactics, and many are fooled by the scammers. DO NOT engage with these people and do not give them money. I will NEVER ask the viewers for money. I accept tips and compensation for products and services rendered, but I will never ask you for money without delivering value. I do not give tings away and then ask for shipping. I will however ask you to visit RainmanRaysRepairs.com to visit our store and to try our new Coffee lineup. (End of shameless self promotion)
    160
  85. šŸ‘‹šŸ˜
    156
  86. You are right. Maybe I should replace the whole tank. When it comes back, I'll sell him a module, tank, fuel lines and injectors. That will fix the problem.
    156
  87. The Storm has passed. No hurricane force winds but we had random tornadoes all night last night. I hear Sarasota has cars and homes underwater from a ridiculous about of rain. My area reported 16-18ā€ last night. By the way... The comments frequently mentioned my Banks Ram Air Intake, folks were wondering if it sucked up any water...here's the UPDATE: PROOF! The Banks Ram Air Intake (HydroLock Concern) DURAMAX 6.6 @bankspower https://youtu.be/8VaAP4JTodA
    156
  88. Ā @cristianruelas3011Ā  šŸ¤£šŸ¤£ All day long. You pay for my experience, not my time.
    154
  89. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£ I had to leave the oops in. Really needed to see if anyone would figure it out! Bravo sir! Bravo!
    150
  90. Iā€™ll make some up updates on it soon. Itā€™s almost 9k from PayPal. And The gofundme is over $27k. I spoke with Ryanā€™s family yesterday. They are overwhelmed by the support from everyone and are so grateful šŸ„¹
    147
  91. Here you will find Part 2 Unlisted/Early Release https://youtu.be/NYuoZFTLZsI
    144
  92. Ā @RMSadventures-ie4frĀ  It wouldnā€™t be that hard to figure outā€¦ hint: itā€™s not Firkins šŸ˜‰
    144
  93. Ā @Tyler-zw4kqĀ  Water makes its was past the window seals and pools up over time of the drain is obstructed. All doors allow some water intrusion past the glass. 99% of the time the little drain holes never become clogged and the water just drains from the doors without issue. Areas or seasons with heavy pollen can cause the drain holes to clog. Parking under a Florida Oak caused this one. Those trees drop leaves all day, which can end up on the glass at the seal. Then the window gets rolled down, and in goes the fallen leaves. It's something that most folks would never think about but it happens.
    140
  94. Thatā€™s the greatest analogy Iā€™ve ever heard
    133
  95. Decision made: Iā€™m going to trade the paint guy an engine swap for a paint job. Iā€™ve decided to paint it the same color as my Silverado. So itā€™ll be pewter/silver.
    131
  96. "Wife Unit" T-Shirts and more https://rainmanraysrepairs.myspreadshop.com/ Part 1: Parts Cannon!! Can it be saved? 95 Jeep Wrangler 4.0 https://youtu.be/XGx5cooQLQY Part 2: Frustrating Diagnosis! It LIVES AGAIN! Jeep Wrangler 4.0 https://youtu.be/ZPBWAGcc-8M
    129
  97. FINAL PART BONUS VIDEO-SUPERFANS ONLY! https://youtu.be/8GW-AqDJbb4
    128
  98. Truth
    126
  99. 2nd Channel BONUS VIDEO: Axle Autopsy! Towed in, Drove Out! Chrysler 3.6 https://youtu.be/AkdYazF2EWY
    125
  100. Ā @Tyler-zw4kqĀ  You can't warranty dirt clogging a drain because they owner parks under a tree. It's called maintenance. Warranty doesn't cover maintenance.
    125
  101. Howdy folks! Welcome!
    125
  102. Ā @hydorahĀ  Yea I realize that libertarianism by its definition, is flawed in practice. But fundamentally it best reflects my point of view. ā€œStay out of my life, stay out of my business. Screw taxes and leave people alone. People can sleep with whoever they want, bc itā€™s no one elseā€™s business what happens in the bedroom. Iā€™m a fan of the nonaggression principal. Iā€™d like to see an unregulated free market economy. I realize that itā€™s flawed, and that talking points are endless on these subjects. However, MIDDLE GROUND is where compromise can be made. Our society is so left and right these days that neither side will even listen to the opposition anymore and both sides are making political moves by force, rather than agreement. The system is currently broken and needs to be rehabilitated. I think good place to start is for the middle.
    124
  103. This whole comment section is completely savage today, so Iā€™ll answer a few things. Yes, there is a fuse on the power wire, yes the ground cable has a good connection to the seat bolt. Yes, itā€™s a one channel amp running two subs and 1ohm, thatā€™s what the owner wanted. Personally I would have run a two channel. Iā€™m aware that impedance and DC resistance is not the same thing. DMMā€˜s are not made for measuring audio equipment however we got a visual example of what I was talking about, I even had to help. No, I do not like the speakers touching the back seat, No I didnā€™t sell any of this equipment so the fitment issues are not an issue. Yes the amp has enough air round it to cool itself. No I didnā€™t bolt it down, Iā€™m not going to blindly run self tapping screws through the manā€™s floor and carpet. šŸ‘šŸ˜Ž
    124
  104. Ā @rexko381Ā  nope, first thing this morning
    121
  105. I already ordered the upgraded parts at the time of the convo. Regarding my LBZ, itā€™s getting some 30% over units later. However, Iā€™ll put in a set of the Diesel Logic units because they offered them. That doesnā€™t mean that I wonā€™t be installing the 30% overs anyway. Itā€™s not about some free parts for me
    120
  106. Ready for Part 2? Click here! https://youtu.be/jIvOYnyNdVs
    117
  107. Any shop will be happy to do a super thorough and comprehensive inspection for a prepurchase inquiry. They usually charge between 1-2hr labor.
    117
  108. Ā @clbcl5Ā  ā€œweā€™re all here because weā€™re not all thereā€
    117
  109. Ā @KeoniPhoenixĀ  Thanks for the info. I always wondered what that reflective patch was for. I should work for GM as an engineer... Lol I know exactly how to fix that problem and make the failure rate nearly zero. Everyone ready for it??? It's really quite simple. Make two parts. One cooler for the trans, and one unit for the condenser. BOOM!
    113
  110. Ā @williambrennan5701Ā  yes I know thereā€™s a lot of shit heads out there. Iā€™m sorry youā€™ve had those bad experiences. I wish you were my customer. Iā€™d never pull a stunt like that, thereā€™s more than enough honest work out there!
    113
  111. Torque stickā€¦ Google it.
    113
  112. Are you sure, adding shims would have moved the caliper closer to the center line and cause more grinding
    113
  113. Hi guys! Not a reeeee-upload. This was available early through links. Please comment ā€œReeeeeeā€ if youā€™ve seen this beforešŸ¤™šŸ¤£šŸ¤™
    112
  114. Seriously, I knowā€¦right. After 20 years of tightening drain plugs, thereā€™s no way I could possibly know how right to make it! What in the world was I thinking!
    111
  115. Watch the last 30 seconds of this video! Youā€™ll see what I did šŸ˜‚
    111
  116. I replaced a frame once because of bent bumper
    110
  117. Ready for Part 2? Metal on Metal Clutch! Driveshaft falling out Square Body Ford F150 300-6 https://youtu.be/gFWMU7hw8N4
    109
  118. Ya because that's as fast as it goesšŸ¤£
    109
  119. Ooh I got it. This nonsense is why I started filming to begin with.
    108
  120. I will pour more liquid soon
    108
  121. You figured me out Dr. Freud!
    107
  122. Ā @eriksalas5422Ā  thx Erik
    105
  123. Ā @snorman1911Ā  This thing was such a nightmare that I didn't even put it on a lift to film the undercarriage. I was afraid it would break in half and kill me. That violates my first rule of the shop. "Don't die today because someone else is an idiot."
    103
  124. The spot where front and rear covers meet the block skirt has a small seam between pieces and the surface at that area may not be smooth or perfectly flat. The sealant is there to fill the path that oil could take and leak out. The pan gasket canā€™t seal into gaps.
    103
  125. You knowledge is overwhelming
    102
  126. Iā€™ll miss you guys!!! See you on the other side!!
    102
  127. Ā @vmxg8052Ā  You are correct. The drains are those little square cut holes just below that rubber plug.
    101
  128. Negative, bought this weeks ago. Actually youā€™re right, Iā€™ve spent thousands on things for the new shop, and the rent, and legal, and accounting, and bills, services etc, yea it hurts inside.
    101
  129. Part 2: F150 Electrical Repair Broke Door Jam Wiring https://youtu.be/UM7wZiyp084
    100
  130. Ā @geneyus6411Ā  Shimming the bracket works cause it move closer to the rotor. Go watch it again, Iā€™ll wait here for an apology
    99
  131. The biggest driver for me has been customer service. The snap on vendors always have a presence and maintain their schedule. Customer service sold me these tools. I have Matco Boxes thoā€¦ I bought it for reasons other than the brand name
    99
  132. I have a troll in real life that stalks my channels and thumbs down every single video. Thanks for the clicks Jake! šŸ˜‚šŸ‘‹šŸ˜Ž
    98
  133. It didnā€™t sound like a typical bearing noise, and I couldnā€™t get any positive results using a scope with the van on a lift. There was no play in the bearing either. Since the tires looked ok the best hypothesis was that the bearing was causing the noise. The customers was willing to take the gamble to replace it based on inconclusive information. And yes, the noise was eliminated after replacing the part.
    97
  134. Notification Squad is strong today :) Happy Thanksgiving at ALL! Best wishes to all of you and your families!
    96
  135. Ā @Flies2FLLĀ  I vote a hard NO on state inspections. 1: It leaves most people vulnerable to fraudulent repairs 2: The governments job is NOT to inspect personal property. Perhaps the middle ground could lie with insurance discounts for annually inspected vehicles
    95
  136. Razor Sharp Gears!! NOT Good! Project Jeep 1995 Wrangler 4.0 https://youtu.be/Q5irXiktUbI
    95
  137. Theyā€™re sending me a set of injectors as well. Iā€™m going to put them in my LBZ. Iā€™m at ease, and like I said before I went at them pretty hard based on negative information. It was good to see the other side, and we had discussions at length about their product and QC. Omar acknowledges the bad rep from past errors and has worked diligently to improve over the years.
    94
  138. Ā @frbrbrgrblgrr7777Ā  There are 1000 different ways to do a particular job! Iā€™ll also add that in this particular instance doing it the shortcut way wouldā€™ve made a crappy videošŸ¤£
    93
  139. I like to think the scrutiny itā€™s how improvements are made. Plus Iā€™ve learned many things from audience feedback.
    93
  140. Ā @Tyler-zw4kqĀ  Water gets in all doors, then drains back out.
    92
  141. Awesome. This is a promising field. Remember, don't be afraid to say "I don't know" and always admit your mistakes. Never stop learning.
    91
  142. You had to do it, ya didn't even give anyone else a chance...I hereby void your victory
    90
  143. ā€œWife unit" T-Shirts Hoodies Sickers and more! "Wife Unit" T-Shirts and more https://rainmanraysrepairs.myspreadshop.com/
    90
  144. Super Secret Hidden Unlisted Video! Dodge Ram 1500 5.7 Hemi 4x4 https://youtu.be/pRlndO72558
    90
  145. This problem is NOT isolated to the automotive parts supply chain, this is a major issue that reaches all markets, SHARE this video with someone, Lets stop the steal!! Related Videos about the Thievery Below: Short Video mentioned earlier: Scumbag Auto Parts Theft! https://youtube.com/shorts/B9YQOXKFozg Mechanic Theft! Inside Job? (Why so ANGRY?) Stop Stealing! https://youtu.be/QoiL9YKE-zY Full Length Repair Video Pt 1: SCREAMING Bearings! (Full Teardown) Ford F-150 4.6 5.4 https://youtu.be/qnKHsYRrzHM
    90
  146. I case you need to catch up.... Here is Part 4 (giveaway offer): Razor Sharp Gears!! NOT Good! Project Jeep 1995 Wrangler 4.0 https://youtu.be/Q5irXiktUbI
    89
  147. My brain knew what I meant. I was thinking about some sort of degree / percentage hybrid calculation.
    89
  148. Instant cancelled if I do šŸ¤£šŸ¤£šŸ¤£šŸ‡ŗšŸ‡øšŸ’Ŗ
    88
  149. Well my fearless leaders decided to submit the repair to GM for warranty and make no mention that it was caused by some sort customer abuse. So I threw an actuator cam plate into it and sent it on its way. The customer should have had to pay for this. A proper repair would have been to disassemble the dash cover and clean out of the debris. Then replace the stuck actuator cam. So basically I had to do a half ass repair to avoid a difficult conversation with the customer. The job paid 4.8 hours.šŸ™„
    87
  150. I have just realized this after watching the video again. I was shaking hands with danger. If I got stuck, I would have been there overnight if I couldnā€™t recover it. I didnā€™t have a shovel. Got home today. I need sleepā€¦..canā€™t sleepā€¦.
    87
  151. Ā @SOU6900Ā  reported for spam šŸ˜‰. šŸ–•that guy
    86
  152. This is a 18-20 hour job condensed into an hour and a half videoā€¦do your worst drivetrain trolls!
    85
  153. So youā€™re saying that gear oil and ATF never break down like engine oil, brake fluid doesnā€™t absorb moisture and coolant never becomes acidic? I feel the shame! My whole career has been a lie, Iā€™m going back to flipping burgers I guess! šŸ¤·ā€ā™‚ļø
    85
  154. Itā€™s been a total blur this whole time! šŸ˜¬
    85
  155. Arenā€™t we all kids inside??
    84
  156. You did the right thing. Iā€™ve found so many counterfeits from online sources. Good counterfeits too (meaning hard to identify) even the packaging looks legit
    83
  157. šŸšØšŸšØšŸšØYOU are being SCAMMED!!! Again. https://youtu.be/y7sS3jqBRVk šŸšØšŸšØā€¼ļø
    82
  158. Training Day! He Left Me ā€Ž@WifeUnit https://youtu.be/tj6zMPwGsqc
    82
  159. Ā @FrancoCastroĀ  I like my trolls, they make for great comment threads!
    80
  160. "Wife Unit" T-Shirts and more https://rainmanraysrepairs.myspreadshop.com/ Skip Black Friday 2022 buy a T Shirt!
    79
  161. I totally dropped the ball on firing order. 1,2,3,4ā€¦.5,6,7,8
    78
  162. Ok so if I go back and pull the center plug it will level the fluid to spec??
    78
  163. Oh I know. My advice was return it to stock but the guy really really liked the LEDs
    78
  164. The interior ws perfect Aaron is the second owner and has known this truck for years, it has 8k legit
    77
  165. So I fly across the country to share this event with you, and you respond with this? Cā€™mon ā€œI do Carsā€ says we love you too
    77
  166. Tough times my friend, Iā€™m sry youā€™re going through it. Iā€™m honored that I can be there for you!
    77
  167. Donā€™t put that evil on me! Would buy that car, just to throw it away, so I didnā€™t have to work on it
    77
  168. FordBossMe Super tough Diag Ford Raptor https://youtu.be/7vNyPLBwoAI
    77
  169. Ā @osrspureĀ  Heat in the lenses wasnā€™t the cause of the malfunction. The current draw from the lamps was causing it because they use more amps then the halogens. The BCM, located in the cab was shutting down the lights. The relays that I installed, took the load away from the BCM while still giving it authority to operate the lights. I considered leaving the covers off, but felt that water intrusion had more risk then heat build up. I figured that the surface area of the headlight housing was enough to dissipate the heat generated by the lamps.
    77
  170. Right... It's hard to fake a pneumatic impact gun. šŸ¤£....or is it?
    76
  171. PART ONE! Monday. Day 1 Prepping! Hurricane IAN: Live ish update from Gulf Coast Florida https://youtu.be/tfuPjxcl6ks
    76
  172. ?? whuuuatttt? Pressure testing wont find a flow restriction. And being only quart low I doubt there is a leak. Low coolant want the cause of the overheat. The system will cool even with only half capacity.
    75
  173. 2021 Nothing surprises me anymore LOL
    75
  174. This wonā€™t just affect propel with diesels. Every single person is going to feel this in their lives. Diesel makes the entire economy operate. Without fuel and trucks rolling, EVERYTHING will stop or carry serious price increases. Americans are using debt to offset fuel prices, when the credit lines are maxed out, folks wonā€™t be able to commute to work, itā€™s getting serious.
    74
  175. Past 2 is Unlisted, but ready to watch. DPF REGEN! LOUD! https://youtu.be/p9Hm9kihz_s
    74
  176. I knew I should have made a ā€˜clickā€™ sound
    74
  177. Ā @bigtuna9529Ā  I can do it.
    74
  178. Not wrong. I talk to car parts, nuts bolts and tools all day šŸ¤£
    74
  179. šŸšØšŸšØšŸšØTruck damage after hitting deer! https://youtu.be/9vwIFgzTWLY
    73
  180. Short Video mentioned earlier: Scumbag Auto Parts Theft! https://youtube.com/shorts/B9YQOXKFozg
    73
  181. Shameless self promotion: Use my Amsoil link down in this videoā€™s description to purchase your premium engine oil for your engine. Preferred customers currently receive free shipping as a promo from Amsoil.
    72
  182. PM. Iā€™d on the Cat here! $1000 Oil Change (250hr PM Service) Cat 289D3 https://youtu.be/hg66zk_eJ68
    72
  183. Misdiagnosis! Mechanic was Wrong! https://youtu.be/S5vAL5TJ7no
    71
  184. We live in upside-down land. I call it the 2022 affect
    71
  185. Forgive me folks I've made an error. Looks like I omitted part about checking for power at the pump connector. The pump DID have power with the key on. I don't know what I did with that scene and I apologize for not noticing during editing.
    71
  186. Well, it looks like youā€™re about to be cooked when I post the confirmation video about the PCM
    71
  187. šŸšØšŸšØšŸšØALERT! What was I thinking? I bought this car...click here to see what my plans are for this blowin up Toyota! https://youtu.be/rlJIp4NPRfg šŸšØšŸšØšŸšØ
    71
  188. Legendary Battery Restoration! https://youtu.be/FDFzXXikt3c
    70
  189. Comments here have me šŸ˜‚šŸ˜‚. Edit: thanks for that
    70
  190. You got it all wrong, Eric O sold me the sound effect šŸ˜‚šŸ˜‚šŸ˜‚ āœŒļø
    70
  191. Part 1 F250 Super Duty 6.7 | Hidden Failure Causes the Death Wobble! https://youtu.be/hPWKO_LjyPY Part 2 The 5th Ball Joint!! Ford F 250 6.7 Diesel https://youtu.be/0VFCpQJ6yJA
    69
  192. What Could Go Wrong? Customer Supplied Parts! 2007 Lotus Elise 1.8 https://youtu.be/ZqKHP0fNwJo
    69
  193. You clearly didnā€™t watch the video. Please donā€™t make fun, Iā€™ve been struggling with a below average intelligence level my whole life.
    69
  194. If you missed the update, Mr.Troy has left the shop. Storytime in this video https://youtu.be/4tNBfsqQKfo
    69
  195. Weā€™re all going through something tough these days! Youā€™re the reason that I do this. We all need something positive in our lives.
    68
  196. Hi everyone!
    67
  197. I pinned this one, very interested in the feedback šŸ˜Š
    67
  198. Ā @RockinRobbins13Ā  They donā€™t report current events, they just tell us a story with some drama to keep us interested and distracted
    67
  199. Maybe Iā€™ll remove it for the wet seasons. There is an opening/pass though in the cold air shop. I assume itā€™s to prevent water from being sucked up. BTW the fenders on stock setups can also suck up water
    67
  200. All we need is a drain plug
    66
  201. Extended Warranty is a SCAM! (Insider Knowledge) https://youtu.be/fjrfXVpU42U
    66
  202. Part 1! Hack Job! Mechanic Botches Engine Replacement! Ford F-150 5.4 3 Valve P0345 P0175 P0063 P2006 P2195 https://youtu.be/nO6VUpahnng
    66
  203. I give up a lot of ā€œmeā€ time to do what I do. The world is full of selfishness and I want to see selflessness make a comeback. Bringing in something good will spark change through inspiration.
    66
  204. Ā @Chris-hw4mqĀ  clip my rear bumper and send me sideways into oncoming traffic or into a tree
    65
  205. I work late after the kids go to bedā€¦ itā€™s really cutting into my video game time tho šŸ˜‚
    65
  206. Click here for part 2. Reassembly https://youtu.be/MNqwwU1bS9o
    65
  207. Bwahahaha!!!! I nearly spat my drink out! šŸ˜‚
    65
  208. Suicidal Deer and Zombie Protection! Duramax Diesel 6.6 Dually Fortification https://youtu.be/WnoGViza0iA Second Channel Video!
    64
  209. Thatā€™s terrible šŸ˜ž Carbon monoxide has no smell I believe, itā€™s a real danger
    64
  210. I hang on to hope till the bitter endšŸ˜†
    64
  211. I say good luck to that. That pittman arm is a bear to remove. Calls for 4.2 hours.
    64
  212. Ā @raymondreiff8170Ā  weā€™re all in the same boat here. I do this all day then come home to watch myself do it again šŸ¤£
    64
  213. šŸ˜‰
    63
  214. šŸ„ø
    63
  215. Yea I did that, and it was only a qt low. It was boiling out of the radiator while the gauges didnā€™t even reach operating temp yet. It had no flow, flow is regulated by the thermostat. It was stuck closed. It continued to run hot after the radiator was filled. Upper house was super hot, and the lower hose was ambient temperature.
    63
  216. Ā @samspade685Ā  The directions literally said reuse old throttle bracket and cutting/grinding work needed . šŸ¤£ This entire thread is 100% savage
    62
  217. Why does the mechanic always take so long? https://youtu.be/thUIOAa3MWo
    62
  218. Miami Shop Ripoff! (New Parts they Said) Toyota Tundra 5.7 https://youtu.be/FrSsl_shNro
    61
  219. Ā @aderi31415Ā  I need to clear out the shop tomorrow but thatā€™s it for me. Not moving out totally, but Iā€™m getting electronics and hand tools out. Boxes raised up on the lifts and everything else gets wrapped in plastic
    61
  220. Chemical Intake Cleaning (Pt2) HERE! https://youtu.be/k_FW9cahgBM
    61
  221. Oil Leak! Common Issue! 2004 Chevrolet/GMC Suburban 1500 5.3 https://youtu.be/Jdv_hRdwAw0
    60
  222. Lol this is the one I was most concerned about. This is one of the last ones from the stealership.
    59
  223. Holiday Shopping! Check out our New Custom Embroidered "Rainman Rays Repairs" Hats and our custom RRR and Wife Unit Coffee Mugs and Tumblers at RainmanRaysRepairs.com Watch the Wife Unit unveil our tumblers HERE! UNLISTED video https://youtu.be/5Q2DWBes258
    59
  224. Ā @WhitentonMikeĀ yea but my customer wanted the SAC00ā€™s itā€™s an updated design. So going with the regular ones wasnā€™t an option
    59
  225. Prepping the new Engine for Installation! Dorman Oil Cooler Install and Walnut Blasting! https://youtu.be/6eRrgGIK00o It's over on the Second Channel Rainman Ray Off Duty.
    58
  226. Pt 1 Diagnostic: Flood Damage Begins! Warranty VOID! Used a Drill on a Seat?? 2019 Dodge Challenger 6.4 https://youtu.be/kPh0LXuV4vQ
    58
  227. Right! I expected the excavator footage to be a comment generator! šŸ¤·ā€ā™‚ļø
    57
  228. I shall not neglect the he cup šŸ¤£
    57
  229. šŸ¤“
    57
  230. Unlisted Second Half https://youtu.be/AOmF3GNoDIc
    57
  231. Ā @bradhaines3142Ā  I find myself doing the jobs that nobody else wants. Someone has to do it.
    57
  232. Thatā€™s why I always buy used boxes. Neve r use debt. I can make the same money out of a cardboard u haul box
    56
  233. šŸ¤£šŸ¤£šŸ‘
    56
  234. Ok
    56
  235. Part 1: Parts Cannon!! Can it be saved? 95 Jeep Wrangler 4.0 https://youtu.be/XGx5cooQLQY
    56
  236. Oh I'm working on it. Working on a new employer too. šŸ˜Ž
    56
  237. Go Back to Pt1: Mechanic Stranded! (Total Data Loss) LBZ Duramax 6.6 U1301 U1305 https://youtu.be/trZk-iq4WTU
    56
  238. Ty
    56
  239. My Coffee Light is immediately after waking up in the morning
    55
  240. Ā @BobDole-sq5ujĀ Itā€™s ok Kid, we learn something every day. Besides, the worse part is realizing that you have been running around the internet unknowingly YELLING at everyone since your mom let you use the computer three years ago.
    54
  241. Itā€™s a whole new word now. I wish I would have done this sooner. It was risky and scary but worth it! Quality of life is 1000% better
    54
  242. https://youtu.be/sf9t03wdFFE. Yes your 1000% correct. Check out the last scene of this video
    54
  243. All is well folks!! It took a couple hours and $380 but we got it down today! https://youtu.be/uW0XF6-nj80
    54
  244. šŸšØšŸšØšŸšØI didn't talk about this in the video. I'll consider this a system test, a soft launch so-to-speak. I have removed the merchandise banner from the videos. I did this because we have created the Rainman Merchandise Company and we are opening today featuring new designs and more importantly, new suppliers and produce premium products. I have a "starter selection" available that's designed to replace the old selection with comfortable shirts that don't washout, a new Rainman Rays Repairs hats and new coffee mugs and tumblers. More to come ASAP. Check out our store and let me know what you think at RainmanRaysRepairs.com Please don't break the store on the first day šŸ¤£šŸšØšŸšØšŸšØ
    53
  245. Warning!!! Parody/Sarcasm Alert šŸšØ šŸšØ šŸšØ
    53
  246. Full Feature/Repair HERE! Supercharged Spark Plugs! Land Rover Range Rover 5.0 v8 AWD #mechanic #tuneup https://youtu.be/X3zAN0RmXGI
    53
  247. Late
    53
  248. Wife Unit on YouTube: https://youtu.be/kvgFJmaqiwM
    53
  249. It shouldnā€™t take two days, but this one was at the end of the day (I actually stayed late) But the system did like going through a cool down cycle, loads of air had escaped by morning
    53
  250. Piece of JUNK! Trash or Treasure? Bad Decision? You tell ME! https://youtu.be/eRdUOYLfm6A
    52
  251. Time To install the Dash. Pt2 EVAP installation. https://youtu.be/MH-rN8WTKsA
    52
  252. Everything was going so wellā€¦ that last stud/nut was very disappointing I think this vid was shortā€¦. Try this one! I QUIT! It's over! Forever Job! 2012 Avalanche 5.3 https://youtu.be/fhWJR_hTFqw
    52
  253. I've already completed part 2. Click here for the early release! https://youtu.be/DsKJImkm80E
    52
  254. It's the Irish in me I just can't comply. Let's not forget the first amendment either. I'm working on the manager overreach situation. You'll see some updates pretty soon.
    52
  255. Neglected Camaro! YOU would NEVER let ME work on your car! https://youtu.be/goPBCMwv5cM
    52
  256. I really should have thought about it, but the gauge of the probes simply slipped my mind in the moment. Complacency always gets you
    52
  257. I bought it for when I need it, and today I needed it. I consider it a valuable asset with particular purposes, just like trailers
    52
  258. Sry Mitch, I doubt you took A1-A9 X1 C1 AND L1 on the same day, maybe the softball recert test, but no way you took a full ASE panel in a day
    51
  259. Ty šŸ˜Š
    51
  260. Ā @mart43Ā  I said ā€œclickā€ what more to do want?
    50
  261. Ā @voidthewarranty1429Ā  So we can look at it like a partial flush to dilute and remove more of that nasty burnt oil šŸ˜‰
    50
  262. Itā€™s tightšŸ˜‰
    50
  263. All is well folks!! It took a couple hours and $380 but we got it down today! https://youtu.be/uW0XF6-nj80
    50
  264. Not a rerunā€¦kind of. Itā€™s Sunday I didnā€™t make a video yesterday. I posted this one, which was previously unlisted. There was a live chat earlier to go with it. Itā€™s called a premier video. Sorry for the confusion.
    50
  265. Weā€™re in a position where everyone will be forced to ā€œpick a sideā€ We the People are the side, as a population we have been deliberately divided to pit us against each other causing us to ignore the real agitators
    49
  266. Itā€™s a chineseium scanner. Got it to replace my pocket code reader. Itā€™s actually not bad. Itā€™s no Snap on by any means, but itā€™s ok. Iā€™m making an unboxing/review of it. Itā€™ll be out soon.
    49
  267. Hey me too, it would have made things easier on me when I was a new guy!
    49
  268. Part 1 Discovering the Carbon Fouled Spark Plug. https://youtu.be/eyZSP_UW-8A
    49
  269. The engine has two sensors for coolant temp. One for the gauge and one for the ECM. If the thermostat is stuck open (or removed), the coolant flows freely and fast through the heads and can't absorb heat efficiently. This can cause the heads to run at a hotter temperature. This causes the ECM coolant sensor (sometimes located on a cylinder) head to indicate an overheat condition, which can disable the A/C system. Vise versa when the radiator is trying to cool the coolant. It's flowing too fast through the radiator and can't be cooled down. Again ECM sees an overtemp and disables the A/C.
    49
  270. Whoā€™s still here in 2024??
    49
  271. UNFIT for the ROAD! Brand New 2019 Piece of Junk! https://youtu.be/3IoU5FuNi84
    48
  272. šŸšØšŸšØšŸšØ Part Two: Surgery on the Charger! https://youtu.be/xk8_uy6H6Bs Bonus Footage of the other wheel over on my SECOND CHANNEL! Much Less Drilling and more of the good stuff! "Rainman Ray Out of the Shop!" https://youtu.be/4eFwPXqKxxI šŸšØšŸšØšŸšØšŸšØšŸšØšŸšØ
    48
  273. I document everything it doesnā€™t all make it to YouTube but it does get recorded
    48
  274. Words to wisdom šŸ‘†. Donā€™t forget about feeding the trollsā€¦.I never was one to strictly adhere to the rules. Theyā€™re more like guidelines IMO šŸ˜‚ Iā€™ll keep it up until all of the ā€œrealā€ mechanics out there get me canceled
    48
  275. Gold plated works best!
    48
  276. Maybe they have an axe to grind and I should sue them šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    48
  277. Ā @111sconefulĀ  Hehe chuckles like it long
    47
  278. Hope it holds! Donā€™t fall on me! https://youtu.be/Q2zpRtQ2buM
    47
  279. Interested in Banks Power Performance Products? Visit Banks Power HERE! https://www.bankspower.com/RAY Visit PowerStroke TechTalk/AROD HERE! https://www.youtube.com/channel/UCaRstJ35Lw6TvgTcekT2Z5A
    47
  280. Ā @aldinoaldinovic6282Ā  Iā€™ll just run down to the apocalypse store and pick up everything I need
    47
  281. BACK TO Pt1, full video here! Failed PCM! Published Misdiagnosis? Letā€™s Find OUT! https://youtu.be/my9rk92Fsps
    47
  282. šŸ¤£šŸ¤£šŸ˜‰
    46
  283. LOOK HERE for part 1! https://youtu.be/NbsT4AVk6uE
    46
  284. No no noā€¦.. Thank you!!!
    46
  285. Ā @shawns.6846Ā  Iā€™m going to velocity test a full can now šŸ˜ˆ
    46
  286. If you missed Part 1, click here! https://youtu.be/xzOuRaKXcO8 This link will take you back in time to Part 2! https://youtu.be/lzkcmpvERCo If you would like to own a spark tester, I found a link for one on Amazon. https://amzn.to/3bcE2EU
    45
  287. šŸ¤£šŸ¤£
    45
  288. Ā @TriforceOfCourage97Ā  not too bad at all. Gotta better job, and a bigger channel šŸ¤£šŸ¤£šŸ‡ŗšŸ‡ø
    45
  289. You Asked for it! @WifeUnit https://youtu.be/M-yb5ceN1H4
    45
  290. Donā€™t get me wrong, I can pick on anything. You should hear what I have to say about VOLVO šŸ¤£šŸ¤£šŸ¤£
    45
  291. Eric O! Hello good sir! Love your work
    45
  292. Super secret hidden bonus brake lathe video! https://youtu.be/T4ugvdgaoHY
    45
  293. I had fun with this one. Challenge acceptedšŸ˜‰
    45
  294. https://youtu.be/i9NvUXN8vnM Link to my second channel. Itā€™s construction still, but Iā€™m getting there with it! Two channels is like having two jobs! Have a great day folks!! šŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØšŸšØ
    44
  295. Ā @walterk1221Ā  No way would I prefill an oil filter. Doing so invites contaminates to enter the clean side of the filter. Iā€™ve seen plenty of fuel filters with chewed up sensors from people using pliers. Youā€™re right. (But I didnā€™t damage that one)šŸ˜ The torque spec for the filter cap is 30in/lb no I didnā€™t use the click wrench on that but cā€™mon who does? No priming procedure necessary, thereā€™s a lift pump and it primes with a couple key cycles.
    43
  296. Bad Idea! Will it Survive?? 2005 Chevy Cobalt 2.2 https://youtu.be/YYlxj3OBgvg
    43
  297. Sure thing. Gimme a few days. I'm going to fix this thing but I need to clear up my schedule.
    43
  298. I hear you guy loud and clearā€¦ wonā€™t do that again šŸ‘
    43
  299. Three is a lot of truth/reality in that. Believe it or not, I wonā€™t let people watch me in real time.
    43
  300. 200% correct. Bare with me folks. I just left a dealership where certain tooling isnā€™t needed. That being said I had to do this with no cutoff wheels. Itā€™s time for me to acclimate to a new environment.
    43
  301. Itā€™s hard to do the brake clean sound with a 55gal drum
    43
  302. Yea you know what Iā€™m talking about Eric!
    43
  303. Went too FAR! Invasive Inspection, 6l80 Transmission. 2016 Chevy Tahoe 5.3 https://youtu.be/Z-kGPJH5ZfA
    43
  304. Ā @KashedĀ  lol she gets what she wants šŸ˜Š
    42
  305. Check Description for links to other episodes of this series!
    42
  306. ā¤ Youā€™re very generous! Thank you šŸ™
    42
  307. Ā @MrWaltjamĀ  Itā€™s hard for me to decline jobs, even if I feel like itā€™s going to be a major headache. Youā€™re right, some of the project jobs really put a hurting on me at the most inconvenient times. Persistence wins tho
    42
  308. Itā€™s the general public
    42
  309. PT 1: Oil in Radiator! 2003 Chevy Monte Carlo 3.8 Manifold Leak! https://youtu.be/R-0lWogkyhk
    41
  310. Ā @ScootsMcPootĀ  hahahahaā€¦.words
    41
  311. Ā @jorpsteinnamen4523Ā  not if I throw a guy off the roof of the license plate factory (another Shawshank reference)
    41
  312. I has a similar chat with him after we figured out what happened. This could have happened to any off us. Experience could have caught it before attempting to restart afterwards... But this is how we learn
    41
  313. Maybe maybe not. There's a little tab coming out of the junction block for connections, so maybe they terminal was just was overlooked.
    41
  314. Ā @792slayerĀ  Iā€™m thinking a transverse Ls4 from a Monte Carlo SS would be a great Delorean Swap. It would keep it rear engine and RWD
    41
  315. It's a pilot program LOL
    41
  316. Back to Pt1 Lifting Car off of Lift | VIDEO Ruined!! Mint Ford Mustang GT 4.6 https://youtu.be/0rkpZl-MSlw
    40
  317. Lol šŸ¤£
    40
  318. I usually use black electric tape, but I couldn't find it. It's really pliable and makes a good moisture seal. šŸ¤£
    40
  319. Ā @MichaelSteevesĀ  thatā€™s why 3 good splices cost $200
    40
  320. Iā€™ve been looking at this truck with side eye since it fired up. I canā€™t for the life of me imagine a scenario where this was subjected to flood damage, yet itā€™s listed as flood damaged. Something happened. Maybe that one commenter was right, and some detectives will show up with a warrant and a tow truck.
    40
  321. Well this thread went downhill fast
    40
  322. Itā€™s an ongoing problem. You might like thisā€¦ Unlisted Video right now. Scammer Trolling in action! Mechanic Catches Scam Real Time! https://youtu.be/OBK_U3tKats
    40
  323. We pushed it into the shop to take an oil sample and I pulled the oil pan Check out what I found. This video is on my B channel. All future Trashed Toyota Videos will be found there. Check it out! https://youtu.be/O8Ipm9d_hcI
    40
  324. LS camshaft bearingsā€¦. Theyā€™re fine until you look at them šŸ‘€
    40
  325. @WIFEUNIT mad a video if us yesterday... Florida Man @RainmanRaysRepairs @PowerStrokeTechTalkwARod @CPsGarage https://youtu.be/SmBCm8O8CfY
    40
  326. Ā @trentonb99Ā  Negative ghost rider... That's a 4.8l LS v-8
    40
  327. Ā @KnoxGTXĀ  oh I do. I like my trolls, they make for great comment threats and discussion!
    40
  328. Link to main project https://youtu.be/JiAHlfogQuk
    39
  329. Will it Run? (Melted Pump) Square Body 1992 Isuzu Pickup https://youtu.be/MAwrzBAwUf4
    39
  330. Take a look at RainmanRaysRepairs.com and check out the new round of custom fitted hats and other merch(andise) I'm particularly proud of our hat line and custom tumblers!
    39
  331. Part 1: Sagging Headliner! NOT an EASY Task! https://youtu.be/WCiVhCE1sQc
    39
  332. Silverado Busted BOLT Extraction. Welid it ON! Part 2 Burn it IN! Nuclear Mode! Chevy Silverado 5.3 Exhaust and Cylinder Head https://youtu.be/A6PubZO_pus
    39
  333. Did you miss part 1? https://youtu.be/hzXHesmjFOU
    39
  334. Reeeee POST? Nope. This was available though a link before, but never posted live. Hope that clears things up.
    39
  335. šŸšØšŸšØšŸšØ Part 2 is complete! https://youtu.be/lRNU6fUSwxM šŸšØšŸšØšŸšØ
    39
  336. Ā @EKHBLOVERĀ  you mad bro?
    39
  337. If they come to the suburbs, and chant "shoot the white folks" while rioting and setting fires, I'm 99.999% sure that whites will use 2A to protect our homes families property and businesses. Afterwards the cops will high five us
    39
  338. Ā @FollowingtheCliffNotesĀ  Iā€™ll pin you later
    38
  339. Hurt at Work! Smashed Myself | 2010 Equinox 3.0 AWD https://youtu.be/JfxcCRE47tA
    38
  340. Ā @samspade685Ā  All is well, Iā€™m pretty thick skinned, itā€™s going to take more than mean commentary to get to me šŸ˜‰
    38
  341. Damn it. I thought I'd avoid a safety inspection this time. I really did.
    38
  342. You are correct! I understand that sometimes people donā€™t listen when you speak to them, therefore they choose poorly
    38
  343. Part 1 F250 Super Duty 6.7 | Hidden Failure Causes the Death Wobble! https://youtu.be/hPWKO_LjyPY
    38
  344. Part 2 will be posted tomorrow! Go to Full Video Pt 1: Worse than I thoughtā€¦Water Intrusion! 2008 Jaguar XJ 350 https://youtu.be/9ajXdlhsn7M
    38
  345. https://youtu.be/kyg8s8emxpk Super Secret Hidden Video on Second Channel
    38
  346. Ā @clbcl5Ā missed it oops šŸ™Š
    38
  347. I thought they were all moving to Canada... Whaaaaatt happened???!!!??
    38
  348. Shop Expansion! (8000lb Conex Storage) Hydraulic Tilt Trailer CAT 289D3 https://youtu.be/USjgVbURIys
    38
  349. I hope I catch him before he kills someone, my wife and kids share the road with this fool
    37
  350. Derrick Doing Stuff: https://youtu.be/h_kpaMNNYQQ Tiny repair bill, mechanic gave him a deal!
    37
  351. I just couldnā€™t resist
    37
  352. Part 2 Push Donā€™t Pull Mechanic Stabbed in the Eye! 2012 Toyota Yaris 1.5 Drum Brake Job https://youtu.be/5KhreWphAQw
    37
  353. John, I get where youā€™re coming from here bro, you have a point and itā€™s totally worth discussing, but your delivery is terrible dude. Thatā€™s the problem with the interwebs, we speak to people in ways that would never happen in a face to face conversation. We all can do better on this subject
    37
  354. Thatā€™s a win in my book!!!
    37
  355. It has its moments of terror but we work through!
    37
  356. Ā @HyperionTwoĀ  It was already blown up, doubt I blew it up any worst! This thread doesnā€™t seem to understand that. Spun bearings are spun bearings the damage was done.
    37
  357. šŸšØUNLISTED Video at this THIS videos end screen Or right here Shop Expansion Update! https://youtu.be/rpmmh-bf0Ek
    37
  358. Check out our Website/Merch HERE: https://www.RainmanRaysRepairs.com Look for links to our other channels, appointment and contact info, and our new merch lineup with custom T's fitted hats and MORE! Wife Unit unveils our custom tumblers and mugs https://youtu.be/5Q2DWBes258 also found at https://www.RainmanRaysRepairs.com
    37
  359. Donā€™t forget to check out the new website addition that includes the addition of our new premium apparel store at RainmanRaysRepairs.com šŸ˜‰ Our mugs and tumblers make a great gift! šŸŽ
    36
  360. Check out this shorter A/C Condenser video with the saw cut in the side of the unit. Customer States...WAIT...look at this! Can't make this stuff up! https://youtu.be/9nHSh5ZYFmY āš āš āš Ray's Auto Clinic Clearance Sale at https://www.RainmanRaysRepairs.com We're liquidating the hooded sweatshirt lineup as the weather is getting warmer. Add a hoodie to your cart and receive 20% off the entire order. No checkout code needed.
    36
  361. Ā @wifeunitĀ  šŸ˜˜
    36
  362. Part 3 is ready. I have it on my other channel because I'm out of the shop on this one! Lets take a field trip to the salvage yard for much needed parts! Click HERE! https://youtu.be/v5qNFFVUyyc
    36
  363. I counter troll them too. And if itā€™s really bad, I just pin the comment and break out the popcorn. My videos entertain me too! šŸ¤£
    36
  364. The saga continues! https://youtu.be/DA8_vDIvEeA
    36
  365. You went in deep šŸ˜® And your right I think
    36
  366. Back to the rear differential probing video...Probing the Rear End | 2007 Silverado 3500 6.6 Duramax https://youtu.be/h65u5WxC_08
    36
  367. 2x Extreme Overpressure!! Parasitic Load! A/C not working https://youtu.be/nkHp6Xa7bBw
    36
  368. Hereā€™s the diag video. https://youtu.be/LkEfXOBybH8
    35
  369. Super awesome. Boss man is really laid back. We're slammed busy but it's not crazy. Things are organized! Thanks for asking! And I'm allowed to film here. šŸ˜‰šŸ‘
    35
  370. ā˜ļøšŸ’Æ
    35
  371. Hope not, but I've been to court before. Documenting is critical in my business.
    35
  372. PART 1! AFM VLOM Reseal! 5.3 P0300 P0420 P0430 P0523 https://youtu.be/4T5rF1KkpXg
    35
  373. My response to everyone ripping on me for not using a torque wrench. Watch now! šŸšØšŸšØšŸšØhttps://youtu.be/9YPoQ2PdQ1g šŸšØšŸšØšŸšØ
    35
  374. Brilliant! I knew there was a way. Thanx brother!
    35
  375. If it's not out of time, I think the magnet on the cam touched metal and it has an erratic signal.
    35
  376. All this talk about my tires today...https://youtu.be/oVrCypzkYUk
    35
  377. Ā @jeffreydove821Ā  I donā€™t disagree with you on that, however I still donā€™t feel itā€™s the states or governments job to manage that. There are better ways besides appealing to the pockets of politicians. I speak from experience on this, Iā€™ve been a state inspector in Michigan Georgia and Hawaii, itā€™s a money grab that holds vehicle registration hostage until you pay. The inspectors are highly incentivized to require repairs because they will make money off of performing the repairs.
    34
  378. Amazon link to the "Add a Circuit" fuse assembly https://amzn.to/3D1pLq4
    34
  379. Part 1! Customer States: Blowing Smoke! Barely Running! Where to Begin? 2004 Silverado 4.3l P0300 https://youtu.be/tnXQFSKOPxM
    34
  380. Ā @geneyus6411Ā  because it bolts to the inside of the flange
    34
  381. Not interested in snow. Iā€™m good
    34
  382. FBM has entered the chat! Head over and check out his content! Good stuff!
    34
  383. Hereā€™s why weā€™re stripping this Miata: Dual Destruction! Can they be Saved?? https://youtu.be/Fe5V7wS3xhs
    34
  384. šŸ‘€ā€¦ā€¦..šŸŗšŸŗšŸŗ
    33
  385. TPMS Scanning video https://youtu.be/5W697tcn-S0
    33
  386. Check Description for links to other episodes of this series!
    33
  387. Part 1: Yesterdays Video in case you missed it! Engine oil Leak! Remove Transmission! 2010 Tahoe https://youtu.be/nfKy_O4x4SY
    33
  388. Link to part 2! Click HERE! https://youtu.be/YY_1ocuzTnY Movin on to the EGR Valve and Brake Booster Repair
    33
  389. Only when needed!
    33
  390. Ā @ValhallonexĀ  congratulations! Might I suggest skipping transmissions and going after brakes and suspension first. Reason being, youā€™ll encounter more under car work than trans work. (Plus theyā€™re easier)
    33
  391. Click here for part 1 if you missed it! https://youtu.be/ffm1BDtfl1M
    33
  392. This video is Part 2. If you Missed Part 1... Flaming Metal Chunks! 2012 Chevrolet Avalanche 5.3 4x4 Oil Leaks https://youtu.be/UwBgm3HsEpo
    33
  393. I couldnā€™t bring myself to edit it out šŸ˜®
    33
  394. šŸ¤™
    33
  395. And again I donā€™t care to get a set for me, thatā€™s using my expose to score free stuff and that doesnā€™t motivate me
    33
  396. Part 2 Difficult Repair https://youtu.be/UHaNCn4cFgc
    33
  397. I get it, I didnā€™t want to put it there either šŸ¤·ā€ā™‚ļø. I think the setup is fine and I have little issue with the system as a whole. I can say that I have a similar filter system for my fuel filters and lift pump on my personal truck and itā€™s not being damaged by road gravel. Itā€™s also located outside of the frame. Iā€™m considering unbolting the oil filters and just welding the brackets to the frame to raise it up higher. I want two more inches
    32
  398. Iā€™m throttling information on the first day šŸ˜‰
    32
  399. I have never heard of an expensive caliper testing machineā€¦Iā€™d like to see that. Sounds like bs
    32
  400. That's no joke. Those UAW guy do that kind of stuff. I've seen them fold/pinch wires and use zip ties to keep the pinch. It creates resistance in there circuit and caused all types of trouble codes and malfunctions.
    32
  401. Not putting an thin aluminum knuckle into the pressā€¦ nope
    32
  402. Here comes part 3 where we dig in deep to find the rest of the engines problems! https://youtu.be/89YexHPNJVA
    32
  403. BACK to PT 1! Total Transmission FAILURE? Circuit/Fault Codes? #mechanic https://youtu.be/sA3ZydnDkAg
    32
  404. Ā @joshuawhite3411Ā  That's why I declined to service this vehicle, then took a video of it's condition. I've been in a court room three times in my career over this type of thing. The video that y'all see was shot as potential evidence for the shops defence. Because you never know.
    32
  405. Not for bearings. I donā€™t like the packing tools. Theyā€™re messy and never get used. Iā€™d rather just do it the old way and use a few extra gloves.
    32
  406. Part Two is HERE! https://youtu.be/f5OzVJOCnL0
    32
  407. Back to Part 1 Rust Busted Spring! Honda Ridgeline 3.5 2006-2014 Multiple Problems! https://youtu.be/HLy70fsfuUw
    31
  408. Ā @jthonnĀ I canā€™t turn away, he needs help šŸ¤£
    31
  409. They need to learn!
    31
  410. NoT Safe for the road! Ford Explorer | Rollover Recall & wheels falling off! https://youtu.be/hapvfynmCrA
    31
  411. I have a new hobby, and a new level of petty has been unlocked!
    31
  412. Check Description for links to other episodes of this series!
    31
  413. Ā @Erick726Ā  Kids being forgotten is what bugs meā€¦the device is just a byproduct of the problem
    31
  414. Yea I meant it would lower the boiling pointā€¦slight dyslexia I think
    31
  415. He thought it just needed a simple wheel alignment. Probably BC his buddy or someone says so. Then I come up to the office with a list of worn out parts and he thought I was just up selling.
    31
  416. Weā€™re all gettin after it šŸ«”šŸ‡ŗšŸ‡øšŸ’Ŗ
    31
  417. Ā @blackiedekat2612Ā  Funny how they never bring them back isnā€™t it
    31
  418. Dude don't get me started on AFM liftersšŸ¤£šŸ¤£šŸ¤£šŸ¤£
    30
  419. Ā @rahuldograĀ  Exactly, thatā€™s my point. Tradesmen are required to have certification to handle refrigerant. But retail stores sell refrigerant, off the shelves to anybody. Most people have no business possessing it, because they donā€™t know how to service A/C systems. Itā€™s a legislative failure. Retail store sales, negates the purpose of certifications. Itā€™s 99% chance that every molecule of retail sold refrigerant will eventually be vented into the atmosphere.
    30
  420. Itā€™s probably due to a certain legislative body that found a new way to tax us by making us required to obtain EPA certifications. You know... save the atmosphere and ozone layer
    30
  421. Ā @-vincit--veritas-5588Ā  I see like thisā€¦if I were doing something shady or doing poor work, I could just NOT post it in the internet for everyone to see šŸ¤·ā€ā™‚ļø
    30
  422. Ā @ChuckyBeaverĀ  Itā€™s stores in a separate tank and injected into the exhaust stream. You get around 500 miles for 5-8gal of DEF. If you run out, the injection event canā€™t complete and the ECM will eventually shut the truck down (built in programming)
    30
  423. šŸ¤£šŸ¤£
    30
  424. šŸšØšŸšØšŸšØšŸšØHere is part two where I perform the repair of the A/C system. Which also kicks my a$$ a little. Check it out here! It's over on my second channel! https://youtu.be/Afoy6MpVrSUšŸšØšŸšØšŸšØšŸšØ
    30
  425. Burnt To the Ground! Catastrophic FAILURE! Ram 6.7 Cummins https://youtu.be/JbSlDsEOs-o
    30
  426. We had a good laugh šŸ˜‚
    30
  427. Where do we stop, those are jut simple hoses anymore and can be quite pricy. I think the lower hose was $159, plus 60 for the pipe,38 for a thermostat plus labor for the lower hose. Thatā€™s a 40-50% increase in total cost
    30
  428. Mechanic Catching a LAWSUIT!!! Sellout?? https://youtu.be/tnBYKS88iUw
    30
  429. George, youā€™re my hero today! šŸ˜˜
    30
  430. This is the way
    30
  431. Iā€™ll be back!
    29
  432. Full Length Video HERE! Customer States: Fix it All! Ford Escape | Broken Windows, Check Engine Light & NO AC https://youtu.be/pGva4qth4Yk
    29
  433. I have learned from the commenters that the Cts-V is now supercharged. I have spread misinformation on this subject šŸ˜®
    29
  434. Belt Sander Brake Job. 2015 VW Jetta https://youtu.be/VUt_ZbJS1EA
    29
  435. I actually did oil the castors after I said that
    29
  436. The guys riding in the back ended up smashing it, but it still survived somehow. Unbelievable
    29
  437. Canā€™t sleep right nowā€¦.
    29
  438. I know I know. I had toā€¦the background music was getting me copyright claims from YouTube
    29
  439. Hehehe try it šŸ˜Ž
    29
  440. It had AC in there and it was a super hot dayā€¦. I have method to my madness šŸ¤£. And youā€™re right, I wanted to look cool in a vette
    29
  441. I never knew of such things
    29
  442. Whaaaaat!?! Thanks! This channel isn't that old and I'm no photographer. Thanks for the feedback!
    29
  443. No blown seals because brake fluid was still present. Plus I didnā€™t see any covering the wheels lines or hoses. It did get a visual inspection, but that part was boring and I edited it out šŸ¤£
    29
  444. Unfit for the Road! Brand New Piece of Junk! https://youtu.be/3IoU5FuNi84
    28
  445. We thought that too. Customer noticed that it was building heat while driving. I agree, needs to use the 4x4 more to get more break in. (youā€™ll the the thermometer at the end)
    28
  446. Pt 1: Short Circuit! Fuse box FIRE! 2005 Ford Expedition 5.4 https://youtu.be/pzm710DJAgo
    28
  447. Itā€™s annoying me bc the screen on the camera doesnā€™t look that way while Iā€™m working.
    28
  448. Itā€™s line a movie with lunch and bathroom breaks built in
    28
  449. Flood Damage Begins! Warranty VOID! Used a Drill on a Seat?? 2019 Dodge Challenger 6.4 https://youtu.be/kPh0LXuV4vQ
    28
  450. Part 2! Fuel Injector Leak. They Lied to us! https://youtu.be/dYHdp7mH7MM
    28
  451. I speak southern too
    28
  452. No matter what you do the inter-webs will scrutinize you for it
    28
  453. Iā€™m working on it!
    28
  454. Drove away after an accident! PT 1 Click Here! https://youtu.be/olVRWehEeso
    28
  455. Ā @copmagnet2002Ā  Not saying all y'all install little gremlins... But I've found a few in my time. Last year I found a marble inside of an a/c hose on a Yukon.
    28
  456. Expensive Dealer Repair | 2015 Nissan Pathfinder https://youtu.be/ngYGGfb5Oe8
    27
  457. That you! Weā€™re excited to get it back to the family!
    27
  458. Crossing Flooded Road! This will DESTROY Your Engine! Water in the engine! https://youtu.be/dQBA0W6I9iY
    27
  459. Check out this video next! MAX LOAD on INVERTERS: Twice the Power Duramax Dual Alternator Upgrade! LBZ LMM Off grid Emergency Power https://youtu.be/N-vxhymJgXc Visit DCPower for performance charging system parts here! https://www.dcpowerinc.com/ Not a paid promotion but they did send the alternator for review! Thanks to DC Power INC for making this video possible and contributing to the Silverado project!
    27
  460. Bonus Encore Video (Pt 2): Toyota Prius V 1.8 Valve Cover & Spark Plugs https://youtu.be/A9wlDLEtO5E
    27
  461. Ā @montanashooter8125Ā  šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø I hope so, bc if I did something different, I donā€™t know what it was
    27
  462. It really is purpose build and itā€™s practical for me and my situation. Small car people hate on it, but I forgive them šŸ¤£
    27
  463. Ā @JosephArataĀ  uh-ooh we got a class action in the making here
    27
  464. Hybrid EV: Phantom Engine Squeal | Lexus Rx400 https://youtu.be/Z_JSU0HIc8U
    27
  465. Ā @stevelaminack1516Ā  I will give him the absolute best inspection ever performed šŸ˜‰
    27
  466. Iā€™ll make one just on a wheel alignment
    27
  467. Here's the link to the Camaro mentioned at the end! https://youtu.be/goPBCMwv5cM
    27
  468. Lost Every Time! Shortcut FAILS! 2005 Lexus Rx330 https://youtu.be/nZNgvLfrrw8
    27
  469. Brilliant!
    27
  470. Ā @andrewmcdonald9674Ā  Maybe possibly sometimes, Iā€™ve actually never tried it. I think the rim would be in the way, plus if one could get a blade in there, I bet it wires damage the rim
    27
  471. Brilliant! Thanks for letting me know!
    26
  472. Part 1 Here! Parts Fraud! NOT what we ordered! Chrysler 3.6 Pentastar V6 https://youtu.be/lW3kLqRywJI
    26
  473. Ā @ztm454Ā  No it doesn't leak. The top Yahoo and bottom tank have plugs in the end. What you see is two separate coolers built as a single component.
    26
  474. That is the way!!
    26
  475. Ā @ChuckyBeaverĀ  that wonā€™t matter, diesel brings you you groceries, fuel, everything
    26
  476. Ā @forgetfulme1719Ā  ā€œYou donā€™t have time unless you make time.ā€ I should have done this 8 months ago when I moved in.
    26
  477. !!! I fix now
    26
  478. Itā€™s still at the shop, Iā€™ll get it!
    26
  479. He's inspired me for years now
    26
  480. Ā @MonkeyJedi99Ā  Bro Iā€™m just happy not being lied to all day by stupid people who think Iā€ll buy their BS šŸ˜‚
    26
  481. Well when you put it like thatā€¦.šŸ˜
    26
  482. Ā @K.Kelly87Ā  Great way to get the cardio going in the morning šŸ¤£šŸ¤£
    26
  483. First Look at the Carnage! https://youtu.be/OC031U0dIlA
    26
  484. Link to PT2 https://youtu.be/f5JWLw5nDUw
    26
  485. Bro you legit just said the exact same thing that I said, but in a yelling and less intelligent fashion
    25
  486. I donā€™t always use 40yo tools, but when itā€™s time to troll the trolls, I go full throttle
    25
  487. It might be lube tech day. But itā€™s not jiffy lube day
    25
  488. Iā€™ll be back!!šŸšØšŸšØ Just taking some time off! 400,000 Miles of BURNT Fluid & Loose Wheel! Oil Soaked! 2006 Silverado 2500 3500 6.0 4l80 #mechanic https://youtu.be/VtOTiPlclCU
    25
  489. Check out our new Website https://www.RainmanRaysRepairs.com featuring links to our other channels, contact info, and our new merch lineup with custom T's fitted hats and MORE! Wife Unit unveils our tumblers HERE! UNLISTED video https://youtu.be/5Q2DWBes258
    25
  490. I didnā€™t know that about this engine. Thanks for sharing. Youā€™re 100% correct, it took process of elimination to diagnose this one. šŸ‘Œ
    25
  491. Ā @area.man.Ā  They suffered from a condition where all employees should be obedient little workers whose only purpose was to create profit. After I quit they even threatened to sue me if I didnā€™t delete my channel, we see how that worked out šŸ˜Ž
    25
  492. Stowaway in a brand new truck! https://youtu.be/xWMYysNPDJY
    25
  493. Amsoil doesnā€™t offer me a code bc they donā€™t sponsor the channel, Iā€™m an independent dealer in Amsoils network. However, visiting their site you can find promo deals, they change them frequently. Sometimes itā€™s a discount and other times they give free product with a purchase. Visit my Amsoil page using the link here https://www.amsoil.com/?zo=30606222 Itā€™s located in the video description and half way down the page. If you click on the video title while the video is playing it will open the description tab. This does not work if youā€™re viewing on TV. Email me with any questions! RainmanRaysRepairs@gmail or email the shop off the websites link found at RainmanRaysRepairs.com - Schedule Appointment
    25
  494. Check out MORE Ford 6.7 Superduty Content by @PowerStrokeTechTalkwARod This SHORTED out line | WILL sideline YOUR Ford 6.7 https://youtu.be/3PcOHF1IWGo?si=g0z8_eVzCE2pKwWv
    25
  495. New Engine! Warranty Camshaft Sprocket Cheap and Risky! Ford F150 F250 5.4 Triton https://youtu.be/pJixTJomiLA RANT: Mechanic Catching a LAWSUIT!!! Sellout?? https://youtu.be/tnBYKS88iUw
    25
  496. It wasnā€™t until recently that I began to figure that out
    25
  497. @Steve Austin Pinching a wire with a 180* bend will absolutely cause a resistance change. Don't believe me? Try running a garden hose with a 180* bend. Furthermore the national electric code specifically outlines the number of beds and the allowable radius that can be present in some wires/applications. These principals and laws of physics don't cease to exist in low voltage automotive applications. This is especially true in high and low speed communication circuits between modules where voltage is 1-5v
    25
  498. Back to Last Video: Low Compression Misfire! Dead Cylinder | Will it Run? https://youtu.be/N1RjnwVSbg8
    24
  499. Ā @MrCheckmateMarineĀ  No I didnā€™t āœŒļø and please donā€™t speculate on my personal motives. That would be an very aimless shot in the dark on your part. Have a great day!
    24
  500. šŸ˜‚ Why else would I get my own shop with 12000 lb lifts??
    24
  501. Unlisted follow upā€¦https://youtu.be/w5fRd-RhlQw
    24
  502. It needs to stop
    24
  503. Ā @spacehonky6315Ā The car will be back next week for another check and an oil change. Weā€™re looking for the DTC to set. I did a spill and fill service on the trans to see what happens since I found no metal and the P0776 DTC does not indicate transmission failure.
    24
  504. I do it wrong just to get the ReeeeeeeEeeeEeeeEeEEe
    24
  505. Sheā€™s been around that lot longer than me. We caught her last year and had her spayed. And she gets food as well
    24
  506. I changed it a few weeks ago šŸ‘
    24
  507. Ā @michaelnomura5196Ā Iā€™m a libertarian
    24
  508. Ā @SouthMainAutoĀ  šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    24
  509. Itā€™s just that time of the year
    23
  510. I love safety 3rd ā€¦itā€™s highly profitable šŸ˜‰
    23
  511. 500 mile follow up! 2014 F150 non Raptor 6.2 4x4 https://youtu.be/H4DEcz_zkIg
    23
  512. That switch was for the air pump
    23
  513. Testing for BENT VALVES! Teardown Chrysler 2.4 2010 PT Cruiser https://youtu.be/SIkpZBjieD0
    23
  514. The opportunity was perfect and I couldnā€™t let it go! šŸ˜
    23
  515. ANGRY TECHNICIAN! Customer Gets FIRED! Car kicked out! #mechanic https://youtu.be/8bkT0gR7G_M
    23
  516. Air Intake/Induction Cleaning! https://youtu.be/syGN1EzBREs šŸšØšŸšØšŸšØ
    23
  517. Out of Service! Sideways Steering! Nissan Pathfinder 3.3 VG33E https://youtu.be/mAX48sI7_EI
    23
  518. Ā @timberry1135Ā  itā€™s my first day
    23
  519. Ā @Alex-tu9bhĀ  It has nothing to do with filming
    23
  520. Instant nope as soon as I saw the window
    23
  521. Seriously šŸ˜
    23
  522. I don't need to issue a rebuttal. The viewers will handle that all on their own. Have a great day!
    23
  523. Easily overbooked! Made the same mistake several times in the past
    23
  524. šŸ˜‚šŸ˜‚
    23
  525. I only saw one leader... President Trump! šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²
    23
  526. Ā @frankthespankĀ  This is the way
    23
  527. YouTube really needs a šŸ–• option
    23
  528. BACK TO PT1! Oil Dripping, Check Engine light! Chevy 3500 6.0 lq4 https://youtu.be/3EoDeAXHS4E
    23
  529. Ā @johngardner2807Ā  šŸ˜‚šŸ˜‚šŸ˜‚ OMg I didnā€™t take apart the junk engine in the right order
    22
  530. About to EXPLODE! Pistons Coming Apart Pontiac Firebird! https://youtu.be/-sR2_tNhY6M
    22
  531. Go science!!
    22
  532. Cut Condenser Video: Customer States...WAIT, look at this! Can't make this stuff up! https://youtu.be/9nHSh5ZYFmY
    22
  533. Ā @pb4961Ā  thatā€™s ac water and brake clean that hasnā€™t evaporated. No oil
    22
  534. I dunno, make sure the notification bell is on. There something screwy going on with the AI
    22
  535. Yea weā€™re fine, unless it does something stupid like go out to the gulf, gain strength and then come back again.
    22
  536. @Thomas Sabia Who??? Ohhh our federal overlords, Iā€™ve heard of them šŸ¤£šŸ¤£šŸ¤£. We consider Florida to be District 13
    22
  537. Early Release, because you all are awesome! 3 part series https://youtu.be/PccEdWGJlUQ
    22
  538. I dunno, last time I got drunk and was swimming in my pond at 2am while playing with power wheels cars and toy boats šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚
    22
  539. Thank you
    22
  540. DIAG VIDEO on 2nd Channel: Major Work Needed! 2008 Sierra 6.6 DURAMAX https://youtu.be/KBombJTVEO4 We're Looking to get to 100K Subscribers Check it out!
    22
  541. Ok so after a couple day of Reeeeeeee comments Iā€™ll chime in. For starters, the customer said that the gauge intermittently works then quits. No! I wonā€™t do this job without pulling the intake. Iā€™m not risking straining or cutting my hands up, so I can charge 25% of the book time to do the work. I have to take care of my hands, they feed my family. If I strain a metacarpal or get cut I canā€™t earn. I didnā€™t decide to circumvent the process to ā€œpay lessā€ for a repair because google said so. I donā€™t own that. Others peopleā€™s decisions are not my problem.
    21
  542. Ā @JohnDoe-lt9sgĀ  sorry dude, I donā€™t argue with customers. Silverado Man was convinced that the sender was faulty and didnā€™t want to ā€œwaste moneyā€ on confirmation. He paid me to change the sender, and thatā€™s what I did. And yes, the intake comes off. Yes, it can probably be done without removing the intake. But Iā€™m not reaching back there, cutting myself or straining my hands and getting carpal tunnel syndrome our arthritis when I age to take risky shortcuts. I have to keep my hands healthy. Hurting myself, so a know-it-all can short change me on a job isnā€™t a sustainable model. Just sayin.
    21
  543. Finishing touches: https://youtu.be/0V5AMMQJ2z4
    21
  544. Thank you ā˜ŗļø
    21
  545. šŸ˜ˆ I knowā€¦. He messed up on this one
    21
  546. Burning diesel and moving the economy šŸ˜‰
    21
  547. Yā€™all are great ā¤ļøšŸ„¹
    21
  548. Yeah I got in trouble for that. Not allowed to anymore. We see how well that worked out.
    21
  549. Bahco Brand Swedish Pipe "Angry" pliers! SEVERAL different sizes LOOK! https://amzn.to/3kXgZDt
    21
  550. Facts!
    21
  551. Another Super Easy Fix! https://youtu.be/wTyo3w7gyqg
    21
  552. Iā€™ve already done that on this van, about 6 weeks agoā€¦I see you pay attention to details Bravo sir! šŸ˜‰
    21
  553. Lol part one of something else that we canā€™t get parts foršŸ¤£šŸ¤£
    21
  554. Ā @SouthMainAutoĀ  This is my vision: to have a 4 post big enough to fit a truck like this and a building to put it in. When the state of affairs allows some risk, maybe I can get one.
    21
  555. I stand with Trump because he stands for the people. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    21
  556. Transmission Repair Attempt 1: NO Reverse on Cold Start! Jeep Cherokee 4.0 https://youtu.be/Qi1U32zTJk0
    21
  557. Ā @FollowingtheCliffNotesĀ šŸ¤£šŸ¤£šŸ¤£šŸ¤£ Donā€™t throw him out yet, letā€™s see where this takes usā€¦
    20
  558. I swear I'm not illiterate, dang thing isn't updating...moderately embarrassing
    20
  559. Ā @MrCheckmateMarineĀ  Iā€™m glad you were there to listen to the conversation that we had, Karen
    20
  560. Indeed I do! I love the cars that are a few years old, they come in overcharged with the caps missing from the service ports... customer states they havenā€™t installed any refrigerant šŸ™„
    20
  561. Folks were wondering about a few things in the comments below. Troy was out sick today. The other fella is my friend from Michigan. Aaron is a Ford Senior Master Technician. Check out his channel HERE https://youtube.com/shorts/RUbSn1-3XeM?si=BbKL6l_NP5X4xgMl
    20
  562. Ā @scott.koopmannĀ Iā€™m going build an engine now, just for you šŸ˜‚
    20
  563. Ā @stunessa1Ā  you know, folks can disagree and even tell me Iā€™m wrong, but name callingā€¦.. gets the comment pinned
    20
  564. Ā @wernerpd777Ā  not yet but I will. We wanted to get it running and driving first
    20
  565. We will rebuild šŸ’ŖšŸ‡ŗšŸ‡ø
    20
  566. Yea I got in dealership trouble and I'm not allowed record my work anymore. So I'm not recording myself doing any work.
    20
  567. Ā @snuggy1985Ā  Not particularly, late 40s perhaps.
    20
  568. I noticed that also. I don't think this one is Gms fault. This truck spent a lot time off road. I found lots of dirt and grass under there.
    20
  569. Hate taxes!!! šŸ‘ŽšŸ‘ŽšŸ‘ŽšŸ‘Ž Extortion and theft!
    20
  570. Thx for the comment
    20
  571. One should always have a personal reset after situation like this!
    20
  572. Ā @tinkerscorner54Ā  To be fair I donā€™t have a pico šŸ¤·ā€ā™‚ļø
    20
  573. Itā€™s kinda freaking me out! Never expected this to happen
    20
  574. A channel member gets unsubscribedā€¦ cā€™mon YouTube, do better please šŸ™
    20
  575. šŸ¤£
    20
  576. Maybe the algorithm didnā€™t get this went out to you! Shop is a Disaster!! https://youtu.be/DtBd88axGJk
    20
  577. Open loop means that the ECM is not taking any cues from any of the sensors in the engine is running on a baseline set of parameters. Forgive me I forgot to mention that part in the video. Once operating temperature is reached the ECM will go into close the loop fuel control and thatā€™s where it can dial back fuel usage and become more efficient.
    20
  578. This guy cost me over 300 bucks today. I had to hop online and get a paper weight shaped like an AR lower receiver. I also invested in a really nice pistol brace.
    20
  579. Back to the Broken Bolt Pt1 Mechanic Damages Engine! Drove IN Pushed Out! Subaru Outback Legacy 2.2 2.5 https://youtu.be/Hv95La9hfyY
    20
  580. Ā @MrWoodyBaltoĀ  as much as Iā€™d like toā€¦.
    20
  581. I believe you guys design masterpieces and then come in the suits and ruin everything
    20
  582. Ā @REDBIRD-95Ā  His freedom factory is 20 minutes from my houseā€¦fun fact
    19
  583. Ā @juliek2706Ā  we can absolutely blame Biden for the way the afghan withdrawal took place. He was in charge of the military at the time (commander and chef) and was completely responsible for the failure. All he had to do was say ā€œ donā€™t leave everything there, and letā€™s not just pack up any fly at the last minute ā€œ ( yes Iā€™m over simplifying) Regardless of if the money was spent isnā€™t an excuse for leaving everything there for the enemy to have. We didnā€™t even bring the service dogs back. They were abandoned at the airport left in cages and ultimately killed. The man in charge bears responsibility.
    19
  584. Ā @juliek2706Ā  Really. You went straight to the uneducated card? Maybe I should have used the Afghanistan withdraw example. Ya know the millions of dollars in military assets that were abandoned. Let us not forget everyone that died during the blunder. Saigon 2.0. Here ya go, #1 result from a google search ā€œwasteful government spending ā€œ Other examples of wasteful government spending uncovered through 'The Waste Report' include $8 million spent by the Department of Veterans Affairs to purchase solar panels that were never used. (and I like solar panels)
    19
  585. My god! Iā€™m so sorry to hear. šŸ˜­
    19
  586. Silverado Interior Job Part 1: Sagging Headliner! NOT an EASY Task! https://youtu.be/WCiVhCE1sQc Part 2: Silverado Sierra Yukon Escalade Interior Restoration GMT800 03-06 PT2 https://youtu.be/0m8HWCK7dFg
    19
  587. WHAT?? I can't do a favor without paying taxes on it? Using money that's already been taxed, on a item that was purchased with another tax, after paying taxes on the fuel to use it, on the land that I paid taxes on with more money that was already taxed? You mean I can't bring it to my shop, that pays taxes, to install parts that we paid taxes on, by employees that we pay taxes for, who get paid with already taxed money, and then they have to pay taxes on that money that they made? That's worse then paying sales tax at a garage sale. The IRS isn't that bad are they?
    19
  588. Go BACK the the DIAG Video: Endless Diag! Supercharged Land Rover Range Rover 5.0 #mechanic #diagnostic https://youtu.be/4Hm_1-Y2dxU
    19
  589. Good! keep yourself feeling good šŸ‘ šŸ˜Š
    19
  590. Waiting for engine to be delivered
    19
  591. Donā€™t worry i I wonā€™t mutate into a paid advertising channel. I get offers all the time, but thatā€™ll take away from video quality. I avoid disclosing where I am bc i have a very high workload. Plus we have a few other stores in the area and I donā€™t want to confuse people. Itā€™s better this way for now. If I get my own shop, that could change, but for now Iā€™ve got a good equilibrium.
    19
  592. Ā Ye Old GeezerĀ  Hey, Iā€™ve always been careless. Itā€™s more like reckless really, I do dangerous things knowingly and carefully
    19
  593. Iā€™m good with that plan!! šŸ‘šŸ˜
    19
  594. Yea check out Bearded Ford Tech on youtube, he actually is having a giveaway! This ones legit and is conducted through RainmanRaysRepairs.com There's the video: https://youtu.be/T3FZ_UD1o-Y?si=5k6fBkUPbwFiXNzo Edit, I think the codes works on the whole store now not just for Beared Ford Techs merch.
    19
  595. Ā @chrismast2790Ā  We have learned to fight without having to have a fight.
    19
  596. Ā @THEFALCON58Ā  Sheā€™s the best ever!!
    19
  597. Happy Birthday Yettie!
    19
  598. I donā€™t have to clean things, but I chose to.
    19
  599. Ā @howardpringle9346Ā  I mean if youā€™re getting that shakes, you can check out the second channel: Rainman Off Duty šŸ˜‚šŸ˜‚šŸ˜‚
    19
  600. Youā€™re Still doing it Wrong peter
    19
  601. Part 3 can be found here. https://youtu.be/zczBVy7jE0w
    19
  602. Error error error delete delete
    19
  603. Ā @joshbowling5032Ā  I saw a 2x4 suspension lift on a camaro once. They removed the springs and struts and shoved in wood planks. Had to gain 6" to fit 30" wheels and tires. THEN they brought it to the dealership that I worked at because of a rough ride. The car was painted up like an M&M's wrapper and loaded full of speakers. It was a dope-money-mobile from the hood.
    19
  604. Soo much water on this one, It's worse than Ian was (re flooding)
    19
  605. šŸ¤« I know. At the end of the day I think referring it out was best. The biggest problem in the retail shop environment is time. ā€œDown for Serviceā€ does not exist.
    19
  606. Disney is operating as its own country screw them
    19
  607. Ā @PaedrianGuidesĀ  yes thatā€™s what happened. Iā€™ve been doing this long enough to stop arguing with customers. I offered to diagnose the issue and dude declined.
    18
  608. Facts!
    18
  609. Loaded full of sand. It jammed up the cam plate and burnt up the motor in the actuator.
    18
  610. And a nice one too!
    18
  611. Ā @williampankratz600Ā  ramble ramble ra ra ra ra
    18
  612. šŸ˜Š
    18
  613. Thanks bro. I'm glad you're enjoying the content!
    18
  614. Yea I don't get the comments this time... Wuuuuaaaattt Eeevvver
    18
  615. Ā @MitchGaarĀ  I could have sold them a new airbox or not done anything at all. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø Lol if you thing thatā€™s janky, you should see me shove copper wire into stripped aluminum threads šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    18
  616. Me too! I canā€™t believe Iā€™m here!
    18
  617. Ā @KaiSyversenĀ  Abe was a time traveler
    18
  618. Ā @peterlennon1139Ā  Google a screwdriver for JIS (Japanese Imperial Standard) Itā€™s different than Phillips Head.
    18
  619. That the great resignation in action. šŸ˜‰
    18
  620. no not at all using the wrong tool is preferable to elevate man card status
    18
  621. I thought it was fine but Iā€™d rather not deal with the hate (I still do early release for Channel members tho)
    18
  622. Total Destruction! Engine Block Carnage! 2017 Kia https://youtu.be/tw0dGnYistY
    18
  623. Ā @DenHvideHundĀ  I think it was at 795 once I didnā€™t go back to look, I actually had three different times where I tested it only one made it to camera šŸ˜‰
    18
  624. Past two is here! https://youtu.be/NYlwRZRW6Hc
    18
  625. Big Dog in the house! Iā€™m honored. Whatā€™s up šŸ˜Ž
    18
  626. Ā @dave1135Ā  Oh I know what you mean! Iā€™ve had my share of attempted lawsuits. Iā€™ve mastered the art of CYA in this business!
    18
  627. Yes I do
    18
  628. Ā @JSchaefers91Ā  You can totally tees the new sealant and the pan gasket. The oil on the crankshaft that was flung all over the flex plate and bell housing are a clear indication that the crank seal leaked. Donā€™t mind Mitch..heā€™s always trolling šŸ¤£ Regarding comebacksā€¦ remember the red Ram 1500 that needed a fuel pump. I forgot to make a connection and had to do the whole job twice. I DO admit my mistakes and comebacks. Itā€™s happens to all of us.
    18
  629. Ā @oxygen454Ā  I see about a Q&A livestream this week šŸ‘šŸ‘
    18
  630. Itā€™s a self lubricating chassis
    18
  631. Link to PT 2. It'll take you to the second channel. Click Here https://youtu.be/zVyRihLWJTQ
    18
  632. Ā @P_RO_Ā  Feel better?
    17
  633. https://youtu.be/kK5w1EZSqv8 Riches take on the situation
    17
  634. Ā @jkxssĀ  naaahhh itā€™s fine
    17
  635. Up Early! Good morning!
    17
  636. Looking forward to seeing you again! Take care Brad!
    17
  637. Ā @EKHBLOVERĀ  yes i did
    17
  638. Ā @GspizzyĀ  You can also get some super tech at wal mart
    17
  639. Check out Aaron at Powerstroke Tech Talk for more Ford expertise https://youtu.be/ofHRE_D408Q
    17
  640. Ā @BS-ys8znĀ  Noooooooo I am NOT a freeloader. I donā€™t like valuable tax money being wasted. Like sponsoring electric car charging stations in Sudan
    17
  641. Ā @hydorahĀ  I also should have said that as much as Iā€™d like to deregulate things, I also much appreciate regulations too. Whatā€™s to prevent business from dumping waste into waterways, or using chemicals in our food (which they already do). I suppose my biggest problem with regards to taxes is over reach and waste. Like wasting resources and tax dollars. I agree with taxation on some levels, just not wasteful taxation. There is no one size fits all solution to any of the these issues. Btw sending electric cars and dick shaped rockets to space pisses me off too. Playing devils advocate, musk and bezos created billions of dollars and can do what they please with their cash, although there are many more humanitarian ways to use that kind of wealth
    17
  642. šŸ˜Š
    17
  643. Ā @veteranga7529Ā I have it, we talked about that later in the video šŸ˜‰ Ty!!
    17
  644. Ā @clbcl5Ā  never
    17
  645. I was slow posting it. I was delayed last night. šŸ˜­ šŸ¦® ā˜ ļø
    17
  646. Amsoil Synthetic Blend oil? Did Amsoil sell out?? @BeardedFordTech sent an oil sample to @TheMotorOilGeek and we had a video chat to go over the lab test results. https://youtu.be/kv-CUopdzGI?si=jm_xEKVyef7upJw0
    17
  647. Perhaps, but not when you're paid flat rate turning 75-80 hours in a week...IMO
    17
  648. Be the change that you want to see!
    17
  649. Bingo!
    17
  650. Thanks! Iā€™ve upgraded my production quality newer videos. Check out some of the latest. https://youtu.be/Ckp1S3qnKmM
    17
  651. Ā @chuckd5819Ā  Mitch might join James C is the ā€œpeople kicked out of the commentsā€ section šŸ¤£šŸ¤£šŸ¤£
    17
  652. Used a GoPro 8 with the flexible clip on mount. The GoPro had a stabilization button to reduce the camera jitters
    17
  653. It is. I'm at a dealership.
    17
  654. The hate is leaving you siršŸ«”
    17
  655. And you were first šŸ«”
    17
  656. That's GDI for you. The manufactures consider the problem maintenance and cant/won't repair it under warranty.
    17
  657. Yea it needs a complete restoration again, the body is falling apart šŸ˜¢
    17
  658. Pt 2 Follow up. New PCM Car Misdiagnosed by Mechanic! Wasted Spark Ignition System! https://youtu.be/yUP5QzJfEwk
    17
  659. So glad to hear that I help out! šŸ˜
    17
  660. Yea I think I got reported to TY for hate speech or some crap like that BC I asked everyone to NOT freak out and burn the county down over the election.
    17
  661. Check in the description itā€™s not posted yet but itā€™s available!
    17
  662. Ā @HistoricalWonder720Ā  Perhaps Richard will return and proofread. The confusion may last forever. Please Richard, we need you here. So many questions, so few answers.
    17
  663. Ā @kevincurry4735Ā  gotta go to K Martā€¦.definitely, definitely K Mart
    17
  664. Thanks for the array of compliments šŸ˜‰
    17
  665. Ā @hardway1746Ā  I might have to order one and find outā€¦after I get a tune. šŸ˜‰
    16
  666. Storyā€™s like yours keeps me going. It appears that Iā€™ve fount a niche during our current state of affairs.
    16
  667. HAHAHA I don't think it was a boat motor, but it tried! I didn't think it would be that bad inside, however the universal solvent never ceases to amaze me.
    16
  668. Full Length to Video: What Could Go Wrong? Customer Supplied Parts! 2007 Lotus Elise 1.8 https://youtu.be/ZqKHP0fNwJo
    16
  669. You know, that's what I wanted to do. But the bosses with their infinite knowledge and wisdom decided that a $400 engine, and making the kid replace it šŸ¤¦ was a better option than paying a technician to repair the damage and have possibly have a machine shop bill. Proof that the world is upside down. Managers should be working for the Technicians. It's time to start planning on opening my own shop, I can't deal with working for the walking dead any longer.
    16
  670. Oooh sorry about that. I had the vid a couple weeks ago. It wasnā€™t too bad on me, but still sucked
    16
  671. Ā @ca444Ā  hang in there šŸ‡ØšŸ‡¦ā€¦weā€™re all in it
    16
  672. šŸ¤£
    16
  673. Average day in sunny Florida!!! šŸ¤£
    16
  674. On To PT2! Remove Axle for Engine Oil Leak! 2008 Hummer H2 6.2l https://youtu.be/8ioNRmJKCW8
    16
  675. Ā @IR-nq4qvĀ  do de dooo dooo doooā€¦. Iā€™m realz
    16
  676. I'm aware that I have no protection if I violate company policy. No worries fellas!
    16
  677. LMFAO šŸ˜‚šŸ˜‚šŸ˜‚!
    16
  678. Part 1: Burning Oil Leak (Dripping on Exhaust) Subaru Forester 2.5 https://youtu.be/05R61NAwy54
    16
  679. Thank you. This project defiantly evokes all of mad scientist skills
    16
  680. Been there! Metal removal is terrible!
    16
  681. Go Check out my redemption video of self promotion on the second channel! Trying NOT to believe it! 2007 Silverado 3500 Duramax 6.6 Diesel system additive https://youtu.be/X4AbALaWR7o
    16
  682. Ty for your first comment!
    16
  683. Ā @dhabbott41Ā  Youā€™re the first to hear it bc your comment is relevant to the topic. I have created the Rainman Merchandising Companyā€¦.Iā€™m going to create and entirely new line and stop using the YT recommended merchandisers šŸŽ‰
    16
  684. Click Here fort part 2! https://youtu.be/psOE6kX2H30
    16
  685. Ā @brandonstclair6530Ā  read title šŸ¤£
    16
  686. They still have that pic up?? SMH šŸ¤¦ā€ā™‚ļø
    16
  687. Itā€™s doesnā€™t, but the water will boil and vent through the out of the surge tank if itā€™s been driven while overheating. They said they shut it off as soon as it got h got, but we get half truths very often.
    16
  688. Ā @MonkeyJedi99Ā  hahaha you said dongle
    16
  689. šŸ¤£
    16
  690. Follow up after a follow up! https://youtu.be/w5fRd-RhlQw UNLISTED VIDEO Did you miss part 1? Click here! https://youtu.be/3w_fabntWTo Past 2! https://youtu.be/RM0qGIhkROY
    16
  691. Thatā€™s a negative. I dont think YT sent notification for this mornings video. šŸ˜• https://youtu.be/f5JWLw5nDUw
    16
  692. Thx bigclive! I agree 100%!
    15
  693. @@user-dr5ug2it7n yes I have a case open with engineering. Itā€™s a known issue and theyre working on it
    15
  694. I feel your pain, I spent a year in Detroit many moons ago.
    15
  695. All good brother!
    15
  696. Ā @PowerStrokeTechTalkwARodĀ  problem is that he think the cluster has rolled over
    15
  697. Nope, I think itā€™s double talk. They say theyā€™re going to protect the race track but in the end big money gets its way (answered)
    15
  698. Ā @Ed-shot500Ā  Iā€™ll do it! Come by the shop or email Laurenā€¦. RainmanAppointments@gmail.com
    15
  699. Bro I had three Gopros under there to capture the noise
    15
  700. Ā @BE-ARTĀ  I might buy it actually, itā€™s not mine tho. Owner is moving to Ohio and doesnā€™t know if heā€™s keeping it. Regardless, I still have the machine to easy fix.
    15
  701. Ā @scorpion2005765Ā  Yesss indeedā€¦ bobcats and smaller machines go backwards, this particular machine and this particular trailer do not balance well when backwards. Theres too much weight on the tongue. I acknowledge that I need a better trailer for 10,000lbs.
    15
  702. Ā @breezeistlime96Ā  Feelings dont matter when there is a deal going on and when your hard earned money is on the table. Bring a guy if you can. It can't hurt you and it's your wallet. Not all technicians and/or mechanics are the same.
    15
  703. Had two hours of footage here, had to sacrifice something šŸ¤·ā€ā™‚ļø
    15
  704. Awesome, thank you
    15
  705. You sir are a team player!
    15
  706. Donā€™t forget to check out the new website addition that includes the addition of our new premium apparel store at RainmanRaysRepairs.com šŸ˜‰ Our mugs and tumblers make a great gift! šŸŽ
    15
  707. Ohh somebody will. Then they'll be married to it and will never get it right.
    15
  708. Yea right. Dude was not happy that I went problem hunting and found all the loose parts.
    15
  709. Mechanic Upsells Extra Parts! "While we're in there..." Toyota 3.5 VVT V6 https://youtu.be/S_OrofHfjcQ
    15
  710. Go back to Part 1! Pull the Dash! I DON'T Think SO! No Brand Loyalty! 2007 GM Saturn Honda 3.5l https://youtu.be/cO4XT8D4JGQ
    15
  711. Iā€™m an excellent negotiator šŸ˜‰
    15
  712. šŸšØšŸšØšŸšØYou should love the T shirt I madeā€¦cheek below the video in the merch store. (Shameless sales plug)šŸšØšŸšØšŸšØ
    15
  713. Almost
    15
  714. Yes
    15
  715. Dave and I had a similar discussion on junkyard parts, in 10 years we will have to go full mad max to fix anything
    15
  716. Ā @craigcraigster4999Ā  Yea I could have done that, but then I'm censoring someone. I don't feel I should be the moderator of bumper stickers, and I'm not going to spend the time to do it. I get that I can easily do that, but where does it stop? I'm in no position make that call. People hate cop cars in my videos too, I can't exclude cop cars, then I'll have to avoid fire trucks and ambulances too! If we go down that road, the whole system comes crashing down!
    14
  717. Iā€™m out of town right now. Sry for being latešŸ˜‰
    14
  718. Ā @108gkĀ  Itā€™s not! Itā€™s a bunch of fast Google searches and keyword selection
    14
  719. Ā @tomasgoesĀ  Yea I put it back to together and run some top cylinder cleaner through it.
    14
  720. refresh, it's fixed
    14
  721. Take look at the Leaf Spring Installation Video! BENT Springs! No Airbags Needed! Overload Upgrade. https://youtu.be/5Zi7g0TpRJc
    14
  722. They make Kevlar door and floor liners for this šŸ˜
    14
  723. I think Iā€™m going to do this all the time! šŸ¤ŖšŸ¤£
    14
  724. 10-4 great Saturday in progress!
    14
  725. Upgrade the cables too!
    14
  726. You and me both! Thatā€™s my goal here. A little awareness goes a long way
    14
  727. Both
    14
  728. šŸ‘† First šŸ¤£šŸ¤£ sry Cliff not today
    14
  729. Ā @ChuckyBeaverĀ  I wonā€™t tell him that you said that šŸ¤£šŸ¤™
    14
  730. Ā @GhausterĀ  Thatā€™s deep my man. I share that same sentiment
    14
  731. It caught fire in the torch heā€™d bc of the crappy manufacturing, the whole torch ws red hot while using and I didnā€™t notice bc of my gloves. It could have killed me via explosion, so I threw it away. I need to get a real torch set and not a toy from overseas
    14
  732. I hope so. Welcome to the party. Thanks for watching!
    14
  733. I agree, I think Iā€™m going with a head mount. The problem is that I donā€™t want to miss something if I have my head turned. I think a second GoPro would solve that..... this is how I get bright ideasšŸ’” Thanks for the inspiration
    14
  734. Ready to see the Repair? Click Here! https://youtu.be/hzXHesmjFOU
    14
  735. That first start felt soooo good
    14
  736. šŸ«‚
    14
  737. Ā @foggymtnbreakdownĀ  I think you read into my comment the wrong way. I was referring to how peopleā€™s will willing say something divisive or offensive in text yet would not repeat the same thing in speech face-to-face. Thatā€™s what I mean by balls to back it up. I had a political bumper sticker on my truck a few years ago and the guy passed me driving a convertible BMW. I saw him in the mirror, he read the sticker sped up and swerved into me causing me to Lane shift in order to avoid a collision. I pulled up next to him at the next red light, and asked him why he did that to me. The only thing that 300 pound bodybuilder could do was grip his steering wheel and stare straight ahead. People are tough guys when they think they wonā€™t be challenged but face to face they back down like puppy dogs. No balls
    14
  738. You know ur northstars sir šŸ«”
    14
  739. Ā @Oh-Jay52Ā  I kept my head out šŸ˜
    14
  740. I am the next guy. In light of what I found, weā€™re replacing the control arms later
    14
  741. Ā @patriotmusicgroup3671Ā  I am an asshole actually. And I make bank doing it. Shit boxes line this don't pay my mortgage or put food on my table. So I'll make all the videos I want and I'll call out any pile of rolling crap that I want. I'll make fun of it if I want and I'll post it on the internet if I want.
    14
  742. I might actually install an electric lift pump with filters and then delete the oe filterā€¦maybe
    14
  743. Iā€™ll know itā€™s a setup šŸ˜‚
    14
  744. And thank you for that!!!
    14
  745. It sounds so scary when CNN says "semiautomatic"
    14
  746. Ā @katieyoung3669Ā  That's not the dumbest thing I've ever heard .. But it's close.
    14
  747. I love those hot air intakes. Good for 300 extra HPs
    14
  748. No way, mine is from Harbor Freight! I only spend Snap on money on hand tools!
    14
  749. 600 grit and clear coat in a can
    14
  750. Ā @leroyjethrogibbsĀ  Iā€™m 4 bombs into it so far, the guy cleaned out all of his items and Iā€™ll check again a couple days
    13
  751. Dont tell all my secrets Shhhhhhhh
    13
  752. Check Description for links to other episodes of this series!
    13
  753. I didnā€™t even think about the backwards belt comments šŸ¤£šŸ¤£šŸ¤£šŸ¤£ Theyā€™re going crazy over the belt ribs!
    13
  754. Ā @ettoredivirgilius8789Ā  I dunno about a Tesla, but the Volt, leaf, Prius etc, costs are in the thousands.
    13
  755. Ā @gusser2121Ā  Iā€™m actually trying to train them to become better at their job. None have succeeded šŸ˜ž
    13
  756. Donā€™t put that evil on me šŸ„¶šŸ¤£
    13
  757. Ā @ethangrimes99Ā  itā€™s a VW Touareg. $1100 piece of glass
    13
  758. I agree with everything here šŸ‘†šŸ‘†šŸ‘†šŸ’Æ
    13
  759. I would love to own a Grand National! Or a typhoon/cyclone!
    13
  760. Ā @AudreyBratailyĀ  did you even watch the video? I was communicating a real life point of view that some of the younger guys experience.
    13
  761. The new folks here have already cleaned it out. We donā€™t buy much supplies during a storm. I like to stock up before season to avoid the chaos. Fuel and propane included
    13
  762. Ā @MonkeyJedi99Ā  I think people insinuate that Iā€™m trying to just copy other channels
    13
  763. One has a bad cell.
    13
  764. I've turned my anger and rage into dry sarcasm that exposes truth and reality. šŸ˜†
    13
  765. Not the place for putting people down , donā€™t be an ass
    13
  766. I have to cut a lot of things out for the sake of time. I didnā€™t noid light this one though. Used deductive reasoning. PCM says injector circuit was faulty (and it was intermittent, I could tell because the misfire came and went) Didnā€™t find a problem with the wiring, therefore I concluded that the injector had a fault.
    13
  767. Ā @yodatrucker420Ā  looks like itā€™s time to get out the beam style wrench from 1970 that I got off of eBay and was originally sold by Kmart
    13
  768. Thx bro!
    13
  769. Ā @jerryjerry8673Ā  šŸ™ƒ Iā€™ve grown complacent
    13
  770. Ā @williamjones4483Ā  Im entertaining pulling the rear cover as we speak
    13
  771. I accept this
    13
  772. Tony thanks Brother! Very generous Sir!
    12
  773. Ty! ā˜ŗļø
    12
  774. Ā @superbros1690Ā  Agreed. What I meant is that the engineers would design there system to be robust and fictional. Then have their perfect creation be shit on by corporate
    12
  775. Ty Mike!!
    12
  776. I don't really use the spray, I think it was designed for the v belt days and for some reason it still exists. If a serp belt is noisy, something is wrong and the the spray isn't really the solution.
    12
  777. @ Amazing how clear things become when common sense and logic are applied.
    12
  778. Right on! Thank you for what you do, your guys are lucky to have an admin like you!
    12
  779. Iā€™ll be ok, just the flu or something
    12
  780. Ā @JJPJackĀ  this dude trolls on the regular. Heā€™s fun to have around.
    12
  781. Risky business showing the truth. I bet Iā€™ll get my first strike over this. All jokes aside, thank you šŸ™
    12
  782. I didnā€™t notice either, itā€™s still at the shop, Iā€™ll correct it first thing when I get there
    12
  783. Ā @jeremyg9240Ā  Iā€™m going to troll the trolls soonā€¦I have an old 1/2ā€ beam style torque wrench from K mart that I got on eBay. Itā€™s going be perfect for drain plugs šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    12
  784. I'm the worse mechanic ever. Can't even make coffee properly
    12
  785. The one handed approach is my way of pushing myself and honing my skills šŸ¤£šŸ¤£
    12
  786. Yea thatā€™s a no cloud day. Have yall seen Fl clouds? Theyā€™re like the spaceships from the movie Independence Day
    12
  787. Ā @ibannymousĀ  I this idea, super easy and I donā€™t have to do anything
    12
  788. I appreciate you for watching! Thanks!
    12
  789. Almost!!
    12
  790. Ā @AudreyBratailyĀ  I literally get thousands of comments a dayā€¦canā€™t reply to all of them.
    12
  791. Ā @horrovacĀ  props to you for having the balls to back up your opinions, I find that most people donā€™t have that kind of nerve. I will however disagree with you on the part where you assume that I was triggered by the sticker in question. I donā€™t get triggered and I certainly donā€™t use buzz words like that. I find them to be rather snowflake like. As a Patriot of this great nation , I was indeed quite offended. Personally I know a lot of patriots and none of them are racist. They donā€™t see color they see quality of character. I have been called racist myself simply because of my comment in this video. Throughout my time I have encountered several people that indeed are racist and they have no problem hiding that fact and they certainly donā€™t hide it under the guise of patriotism. My problem specifically with this bumper sticker is the implication that it has towards patriotism. It implies that patriots are racist. I feel that type of conflation is divisive and dangerous, especially during a time when MSM attempts to conflate patriotism with racism. Truth be told I wouldā€™ve enjoyed the opportunity to confront this person with regards to their sticker however I have to maintain a level of professionalism in the workplace therefore seizing that opportunity may not have been in the companyā€˜s best interest. I donā€™t agree that I was bad mouthing them, because at the end of the day I support their right to make those kinds of statements. So much so, that I would even defend their right to make those statements, even if I donā€™t agree with them. Thank you for your comment.
    12
  792. If filming made things take longer overall it wouldnā€™t happen. Everyone is just fine with it.
    12
  793. Yes I realize the error of my ways
    12
  794. I work for a great company. Iā€™d rather invest toward opening another location as opposed to going out on my own. There are certain managerial duties that I donā€™t want to deal with. It would distract me from doing what I do best
    12
  795. I can get away with a 10-12 minute video on occasion. Youā€™re right, the trouble is the details, and those short little clips add up fast.
    12
  796. The people have spoken, Iā€™ll make my best effort to keep to the early schedule.
    12
  797. Good to know!!
    12
  798. We click as one
    12
  799. Ā @jarreldoomis3502Ā  šŸ¤£šŸ¤£
    12
  800. It can still pull air through the fender and wonā€™t suck it up through the low snorkel
    12
  801. Ā @bootinnjĀ  oh Iā€™m over it emotionally. Hereā€™s the silver lining, I exposed a problem, and Iā€™m sure the folks at the parts store will reevaluate a few policies and standards, in the long run, I just did everyone a favor
    12
  802. Thatā€™s the way it should beā€¦we lack accountability!
    12
  803. I'm still trying to figure out what she said. šŸ¤Ø
    12
  804. šŸ¤£šŸ¤£ Our government has already collapsed. Society just hasn't figured that out yet.
    12
  805. Thanks Australia! Thanks for telling the truth. Thank you for backing TRUMP! We won't forget you when the dust settles. G'day mate
    12
  806. šŸ’Æ% safety. Leaving the load on the jack means that the hydraulic ram is holding the weight. Should the jack fail (and they do) the stand is there is a backup. Technically the weight should be lowered onto the stand so the jack doesnā€™t have any load.
    12
  807. Hahah itā€™s just too played out
    11
  808. Chlorinated is terrible for rubber and softer materials so we generally donā€™t use it. I try to avoid the cheaper products bc itā€™s full of water
    11
  809. When I run for president Iā€™ll introduce legislation
    11
  810. My blue wrench is a piece of junk, I need a better quality set of tanks
    11
  811. Sweet, I didn't know that one! Thanks!
    11
  812. First
    11
  813. Ā @FollowingtheCliffNotesĀ  Itā€™s my FBI agent
    11
  814. Ā @davespencer1951Ā  yea but the tool has that little clip on it šŸ¤£
    11
  815. We have all done such things. lol I had a Jeep once with a split harmonic balancer. I tore into it, pulling the fan belt tensioner etc. unboxed the new oneā€¦compared the two and then slapped it together! When it was all done started the engine for inspection and the balancer was flopping all over the place. I looked over and the brand new one was sitting on its box right there on my cart just staring at me! Right then and there I decided that ā€œI love my job so much, I do it twiceā€ in the most embarrassing and sarcastic tone! šŸ˜
    11
  816. Ā @InuyashaMilesĀ  that was the joke
    11
  817. Iā€™ll check it out ASAP. ā¤ļø the Pedal Monster. I tried out Track 1 mode yesterday and it was a total shocker. I donā€™t have the beans to try track 10 šŸ¤£
    11
  818. LOL! Theyā€™ll wait.
    11
  819. Woa, Iā€™m the wrong business. Time to start trucking Subarus to NY
    11
  820. Ā  My Cancer JourneyĀ  Every day is a gift to us! Hang in there! šŸ«‚ā¤ļø
    11
  821. Itā€™s a game we play, Us and the Snap On Truck. They rob my wallet, I demand free replacements forever!
    11
  822. Wow, thanks! I try!
    11
  823. No Crank No Start Fuel Smell | 1995 Ford 1 ton 5.8 351 https://youtu.be/DbFSmlyLecA
    11
  824. I hope so šŸ¤£
    11
  825. lol I havenā€™t said order up in over a decadeā€¦sometimes I miss those days
    11
  826. @RV Shadow Iā€™m not really in a competition, just humbly accepting a compliment
    11
  827. LMFAO...a year later this video had 45k dislikes and 8.8k likes.
    11
  828. Ā @dotar9586Ā  šŸ¤Æ Iā€™ll say 50000 next time
    11
  829. I think JamesC has an axe to grind. All of him comments are negative trolling.
    11
  830. Ā @HUBBABUBBADOOPYDOOPĀ  That the best part about YouTube channels, we can just leave videos that we donā€™t like, then go do something else. Personal freedom is the best! ā˜ŗļø
    11
  831. Ā @82_KIDĀ  I opened my own shop after I left. Itā€™s being set up now. Lots to do
    11
  832. Ā @82_KIDĀ  Noo you missed it. I got myself fired a few weeks ago. Go back and look for the video on my termination
    11
  833. Ā @billotto1912Ā  No Iā€™m not
    11
  834. If fact I would love have a frivolous lawsuit brought against me, the counter suit payout would be great
    11
  835. Ā @Bird-dl7xsĀ  I started with an outdated Motorola phone. Got an iPhone 12 for the better camera,. iPhone has an App called movie, with a good editor. Youcut is also a good editor.
    11
  836. The reality is, the big three all make good trucks. Everything has a failure rate, especially new vehicles. GM had lifter problems. Dodge/Rams have transmission problems, and Ford circles their problem.
    11
  837. Yea itā€™ll be fine, the unibody is good. The crumple zones in the Suspension parts did their job.
    11
  838. Ā @aaronbritt2025Ā  thereā€™s only 3-4 people that have been banned. I donā€™t believe in censorship. However, when someoneā€™s only goal is to be a disruption or if they say things that are wildly inappropriate, Iā€™ll have to show them the door.
    11
  839. Ā @johnkubiak5407Ā  Not a chance, the inner seal had zero wear, they were installed and then removed, prolly bcc someone forgot something (like installing the bearing) and had to take it apart again.
    11
  840. I would, but I have agreed not to mention money on my channel. I have to minimize exposing my employer to any risk
    11
  841. You suck at commenting
    11
  842. I havenā€™t had many weirdos try to get fresh over wife, but also decided removing temptation would be best.
    11
  843. Yea he dropped it off and left. I emailed the shots of the tie rod play, and some shots of them pittman arm. He came back four hours later and picked up his truck.
    11
  844. Im thinking it needs about a years wit worth of bodywork
    11
  845. Ā @DonsJunkmail-vg1wtĀ  Don are you trolling again?
    11
  846. Thanks Eric O! Means a lot from you!! šŸ˜
    11
  847. Good morning
    11
  848. In comparison to how far our culture has come since the civil rights movement of the 60s, and how far the nation had moved from classifying people be race in the decades following ā€¦yes itā€™s dead. Are there assholes out there that judge by race? Yes. Is the the entire system designed to favor one race over another? Nope
    11
  849. Glad I found you here! Thank you! I didnā€™t get a bit with the package šŸ˜
    11
  850. Thanks for the visit Beth! šŸ˜Š
    11
  851. šŸ˜ maybe a little boss. Iā€™m not THE Boss, but I have some pull around here
    11
  852. Itā€™s ok my dude. The low side valve was leaking everywhere because the seal was missing. Remember when I changed it? Itā€™s rare that a system will have two leaks. However I loaded it up with dye because there were too many unknowns here, because the system had been inop for a while. Things deteriorate when not in use and it could easily develop another leak in the future. AND they came back in the next day to recheck pressureā€¦no leaks yet. So yea thatā€™s what I did.
    11
  853. Ā @samishiikihakuĀ  so true, I have bought a case in weeks
    11
  854. After time everything heat soaks. It overheats bc coolant flows too quickly through the radiator and canā€™t dissipate heat. So hot coolant flows back into the engine, and then gets hotter
    11
  855. šŸ’ŖšŸ’ŖšŸ’Ŗ
    11
  856. Being a criminal is also suspicious
    11
  857. Part 2 HERE! https://youtu.be/LKXacmuMVXM
    11
  858. Close, I never posted it live. āœŒļø
    11
  859. Ā @BillSmith-ut5liĀ  and then I said that they were Torqued to spec when I hopped into the cab
    11
  860. Next thing you know, the Left will blame it on racists and Trump himself
    11
  861. Nothing is set up correctly, we will get to that. I have to tune this carb and set timing. Order of operations: cooling system so it can run, electrical system so itā€™s reliable and then tune the carb and the. work out the little things
    11
  862. Ā @tomw8647Ā relax, twas a settings error, I fixed it
    11
  863. Itā€™s either that, or folks think we already know what the problem is and that we just scam people
    11
  864. Thank you šŸ˜Š
    10
  865. That would not be wise. I donā€™t take kindly to treachery, plus I have video evidence šŸ˜‹
    10
  866. Hi Duane! Thx!!!!!
    10
  867. I kinda canā€™t talk about billed hours or money. I agreed not to with the owner of my company. Videos make things look quick and easy sometimes and could cause someone to make assumptions if they have dollar figures to compare a video to
    10
  868. She did have snarky glasses and a beard
    10
  869. They sure do, the advent and gov mandate for TPMS has trained people to stop checking their tires.
    10
  870. Change it, it could be out of round and will spin again
    10
  871. Click here for the video that I mentioned at the end! Ford has BIGGER Problems! https://youtu.be/uzbbxy7BOqU
    10
  872. Ā @SamCanada1Ā  Yup has to put my ridgeback down. She was 13-14 we had her for over 11 yrs.
    10
  873. Ā @donkintz281Ā  Hi Don welcome back. We all have bad days my friend! šŸ˜‰šŸ¤™
    10
  874. No worries. I did quit that job. It's being micromanaged into toxicity. I got a NEEEW one. You'll see some more diverse work coming up.
    10
  875. Ā @chrisb9028Ā  šŸ‘‹
    10
  876. id bet thats exactly how this happened...rush rush rush. but take your time and dont make miskakes...now hurry up this is a waiter
    10
  877. Did you even watch the video?
    10
  878. If I put it down, then Iā€™ll get bad shots, and then nobody will watch my content. That would be bad.
    10
  879. Ok Iā€™m going to have to do a tool box reveal video soon!
    10
  880. Did you miss part 1? Click HERE! https://youtu.be/SZCF0i_QKWA Here is part 3 https://youtu.be/ReLhT8acRlw
    10
  881. It needed a pittman and idler arm, plus both inner and outer tie rod ends.
    10
  882. This happens on all gasoline direct inject engines. Not long ago the fuel injectors were located inside of the intake manifold and the valves were sprayed with fuel which also cleaned the intake runners and valves. With no gasoline flowing over the valve face this is a result. This design ultimately negates the benefits of a GDI engine because of disrupted airflow. Engineering gone wrong.
    10
  883. Ā @clintprice2123Ā  I have a lawyer šŸ˜‰
    10
  884. Sry, I figured proving it out with the scantool ws sufficient
    10
  885. Ā @campervan7354Ā  How do I inspect the cable at the top of the lift, that's 16ft in the air? The cable is 8mo old sooooooooo..It's not even due for it's annual yet.
    10
  886. I think itā€™s broken needs epoxy
    10
  887. Be the change that you want to see!
    10
  888. No perminant fix that I'm aware of. Spray it out with a garden hose. You need to remove the debris so the drains remain clear. Don't park under trees if you can. Once it's clean and cleared out it'll just be a matter of slight maintenance from then on. Good luck.
    10
  889. Ā @biffaozzie2373Ā  Physics books. Specifically thermodynamics.
    10
  890. I couldnā€™t resist
    10
  891. Ā @7spower998Ā  didnā€™t have one, waiter and they didnā€™t want to wait any longer
    10
  892. Oh this is worse than welding on camera šŸ¤£šŸ¤£šŸ¤£šŸ¤£ Too bad I didnā€™t have my c clamp press it goes so much smoother with the toolšŸ¤·ā€ā™‚ļø
    10
  893. Well we didnā€™t have those that day
    10
  894. Are you ready for part 3? It's ready! CLICK HERE! https://youtu.be/6-XCQ_0LbxQ If you missed part 1, no worries...https://youtu.be/j3oWMEV_0RE
    10
  895. Ā @christopher88719Ā  I almost did that this time. I even ordered the gaskets before the truck arrived. I'm glad I checked before selling a repair.
    10
  896. Hey how did you get here? This video is set to private
    10
  897. Ā @mikecumbo7531Ā  Correct. I have an estimation on what would have been said about the situation but Iā€™d rather not say šŸ˜‰
    10
  898. ā¤ļøā¤ļøā¤ļø
    10
  899. šŸ‘
    10
  900. Thank you good sir, for the compliment! šŸ˜
    10
  901. Not on these hubs it doesn't. There is no lip on the inner surface to drive out the races. Hub replacement was suggested due the rust on the studs. The customer didn't want to do it.
    10
  902. šŸ¤¦ā€ā™‚ļø just canā€™t win
    10
  903. šŸ’Æ
    10
  904. Nawww itā€™s a thing here šŸ˜‰
    10
  905. šŸšØšŸšØPart 1 found here! https://youtu.be/WG4QlkHKBXAšŸšØšŸšØ
    10
  906. I'm curious to try it, but again, Publishing such things could get a knock on the door by the alphabet boys these days.
    9
  907. Thx Carl!
    9
  908. Links are not aboveā€¦theyā€™re in description. Theyā€™re not loading in the video šŸ˜”
    9
  909. I greased them when you weren't looking
    9
  910. Ā @alexwolf8019Ā we saw, clearly a super Troll in actionā€¦ Poor kid has nothing to do on a Saturday night šŸ˜¢
    9
  911. Itā€™s been a wild ride to say the lease! I realize that somehow Iā€™ve reached so many people is such a short time and I can say itā€™s a privilege.
    9
  912. Ā @rednew8222Ā  Could you imagine the rage that would follow a video like that? šŸ¤Æ It would turn into a civil war in the comments
    9
  913. They just bought it, great find!
    9
  914. Part 2 Reassembly HERE! Ford Explorer 4.6 Front End Rebuild PT2 https://youtu.be/lxeOgySnIsI
    9
  915. Part 2 Engine Accessory Overhaul! Running Rich-SOLVED! 2003 Ford Mustang GT 4.6 https://youtu.be/Ul1uyExVNXk
    9
  916. Iā€™ll soon be able to charge teslas with this thing šŸ˜ˆ
    9
  917. Yes my brain does odd association things some times. I called the bushings ball joints in this video bc I was using a ball joint press to install them
    9
  918. Part 1: The First Visit. Toxic Sludge in Radiator! "Stop Leak" or What?? https://youtu.be/Jmanna60vEQ
    9
  919. Ā @Flies2FLLĀ  what does ā€œnice try mean?ā€Government means to govern. To govern means to control. Government = Control
    9
  920. Hello! šŸ‘‹
    9
  921. Pants around my waist šŸŽ¶
    9
  922. Ā @Shad0wBoxxerĀ  just easier to connect. Plus using the trailer battery too couldnā€™t hurt
    9
  923. Ā @chuckgulledge2304Ā  the telegram people? Weā€™re on to them. Plz report to TY of you see them. They keep making new accts and I keep banning them.
    9
  924. Very true, most companies (not mine) are disconnected from what this job really takes. AND they still seem to think that there is an endless pool of employees just foaming at the mouth to work for them. Things have changed, demand is high, and good techs are becoming scarce. The really good ones are nearing the end of their careers in the shop, or have their own business.
    9
  925. Ā @clbcl5Ā  I like my 16ā€ saw thank you.
    9
  926. I dunno why the top and bottom did it. It happened while I was trying to blur the paperwork inside of the box. I'm not very good at video editing yet. But I'm figuring it out. Thanks for watching.
    9
  927. @Chevguy85Ā  I see your point. However Iā€™m not an unproductive tech. I constantly bill more labor hours than what I actually work. The efficiency factor is not an issue here.
    9
  928. Ohhh I just thought folks really wanted to know. Didnā€™t take it as a negative at all
    9
  929. I ainā€™t easy being cheesy
    9
  930. Ā @StormsparkPegasusĀ  Folow the money
    9
  931. Ā @rajbeekie7124Ā  I tend to use it in excess on occasion and when I do I use my stash of brake clean. The shop has some too, and I use that also
    9
  932. I buy my own by the case
    9
  933. Spot on, I have one in my deep freeze šŸ„¶
    9
  934. I have little kids, I hear nothing
    9
  935. šŸ¤£ Snowmobile people are in a class of their own! šŸ˜¬ Live streams really arenā€™t my thing. Let me work myself up to it.
    9
  936. I was drunk before I got home šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    9
  937. Ā @DonsJunkmail-vg1wtĀ  We have Charmin Triple ply in the bathroom šŸ˜‰
    9
  938. Ā @geemee3364Ā  I remember station wagons with the rear seat that faced backwards (early 90s)
    9
  939. Ā @clbcl5Ā tax deductible šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚
    9
  940. This one gets me šŸ„¹
    9
  941. šŸ‘‹
    9
  942. Itā€™s a Dana 30, seal is definitely in the middle of the tube. Makes sense, the lubricant can reach the 4x4 actuator and coupler
    9
  943. šŸ˜
    9
  944. Ā @jdub976Ā  Booked out for weeks at all time, Iā€™m very busy and could use more space
    9
  945. Oh I know total hack job! The customer brought in his own rotors and I did what exactly what he asked. Iā€™m such a scammer! How dare I machine someoneā€™s expensive rotors from his 1ton truck instead of selling them some poor quality cheap-steel rotors! Your should report me to the authorities at the earliest opportunity.
    9
  946. Nooooo! Don't modify it, it won't work right or at all. If you're running hot and the T stat is good, something else is going on. Your name suggests you have a fast Camaro. Add the question suggests that it runs hot? Am I close? If so, make sure you have good airflow over the radiator. Fan shrouds and ducting are important. No flex fans. Nobody likes a power robbing clutch fan but they do the job. Good E fans do ok. (No eBay fans)
    9
  947. If they really don't want to fix it, I'll try to buy it
    9
  948. Ā @samboi18Ā  itā€™s weird lighting, car is still here and I just looked again
    9
  949. If weā€™re not making mistakes weā€™re not learning
    9
  950. Itā€™s just a little one. Still making regular length too
    9
  951. first
    9
  952. Trump is becoming the leader of a rising 3 party. We The People will not accept orwellian control over our lives.
    9
  953. Well itā€™s not the parts stores fault so I canā€™t put the burden on them. Itā€™s not the customers fault, therefore I must accept responsibility for the part. I ordered it, I own it, thatā€™s how I see it. Iā€™ll pay $200 (price of the PCM) to learn a lesson and if I made the mistake. Iā€™ll consider it the cost of education.
    9
  954. Ā @tedmitchell226Ā fixed it
    9
  955. You read my mind. I have a feeling that Iā€™ll have to make a whole video on thermometers
    9
  956. I canā€™t post them all in one day. But I can make them available early
    9
  957. Good luck to them I guess, transparency goes a long way in front of a Judge.
    9
  958. I group them together based on what component they came from. The oil pan bolts in this vid are all the same so no need to put them back exactly where they came from. I take mental notes of there is an oddball. On bigger jobs I'll place them with a removed part so I know "these bolts are for this piece"
    9
  959. Compressor Oil: I added a shot with the injector on the low side, cut the scene but we discussed it in the video
    9
  960. Ā @cengebĀ  who says we pay less and have no benefits?
    9
  961. I took the weekend off
    9
  962. No I didnā€™t install it, left that to the folks that I bought the door from. I didnā€™t want to follow them around all day recording, so we missed out on that video
    8
  963. Nope paid off on delivery. I donā€™t do debt
    8
  964. You want me to sabotage his brakes over politics?
    8
  965. LOL We trashed the place again today!!
    8
  966. Ohhh no, Iā€™ve seen folks use the whole tube in one sitting šŸ˜‚
    8
  967. I was wondering how that was going to work out
    8
  968. Part 2: Well Regulated Diagnostic, Resistance Being Necessary! 1987 Jeep Wrangler 4.0 https://youtu.be/lW_8VMA_eOk
    8
  969. Ā @Paramount531Ā  Iā€™ll do better!
    8
  970. Derrick doing Stuff! Look here! https://youtube.com/user/BJAM0608
    8
  971. I was first
    8
  972. Noooooo!!
    8
  973. The base plate is thick rubber and it can flex. When I first got to the carb I thought it was loose as well
    8
  974. Ā @jacobm9263Ā  Itā€™s almost like a vlog, the reality of the jobs dictate how much needs to be DOCutated
    8
  975. Part Two is on the second channel. Click Here https://youtu.be/f_18VdFYnEs
    8
  976. šŸ«”TY much!! I made this remix over a year ago and never posted it.
    8
  977. I worries Helene. Iā€™ll be back
    8
  978. I do indeed. I never leave anything behind when in a car. I also do frequent glove changes to help keep things clean
    8
  979. It was an apprentice doing the work, against the advice of myself. Decision was made by management. Damage caused by a mistake doesn't mean folks get brand new engines. The damage could have been repaired, the engine could have been replaced with a unit of equal or fewer miles, (old one was 74k, new one was 41k) which is what happened in this instance. The owner makes those decisions, not the shop. If you break your phone and file a claim on it's insurance, they don't send you a brand new one, you get it repaired at the deductible or it's replaced with a remanufactured (rebuilt) unit. LKQ offers warranties on units such as engines and transmissions etc. Since the owner got to drive a brand new car car during the repair, got a engine with almost half the mileage and gets a warranty on a vehicle long out of Fords powertrain warranty, I'd say they ended up with a sweet deal in this case.
    8
  980. Ā @danjordan1979Ā  I donā€™t ship the items. Yes spreadshop does ship internationally, check their website for conditions or tariffs.
    8
  981. Needs a control module.
    8
  982. They never confess. I would love to know how this guy managed this.
    8
  983. Ā @Puggy42069Ā  Is in the works, still at the shop. I think all the critters are dead now. Iā€™m prepping to start pulling the engine soon
    8
  984. Fun Fact: The US exports Ford Trucks to Saudi Arabia and others with NO Emissions Equipment. They get to be exempt and receive a better product for less cost, yet we (politicians) seem to be concerned with ā€œglobalā€ pollution
    8
  985. lol I know, have you seen what they do to me when I try to weld something? Ohhh it hurts!
    8
  986. It's needs a crank swap from the ford 3.0
    8
  987. I usually like to send it in through the drain tube at the bottom but since I wanted to cam the evaporator I deviated slightly this time
    8
  988. Sry Friend, I donā€™t censor other people, it could be an AOC sticker on this car and I wouldnā€™t notice that either. Itā€™s not my priority šŸ¤·ā€ā™‚ļø
    8
  989. šŸ˜Ž
    8
  990. Thank you for the knowledge Iā€™ll definitely apply it. I think what Iā€™ll have to do is record with my cam and a GoPro for backup as I learn how to use this thing
    8
  991. Will do!
    8
  992. šŸ¤£šŸ¤£šŸ¤£
    8
  993. Ā @bobbg9041Ā  When someone ordered mid-rare they got mid rare not well doneā€¦a properly cooked burger is an art not to be taken lightly
    8
  994. Ā @GaryH-pw9cmĀ  Thereā€™s about a 0% chance that a taxpayer group can sue me for performing maintenance on the vehicle.
    8
  995. Yea but I thought they were up to something, they denied knowledge of those lights being on Which was a red flag for me
    8
  996. šŸ‘†šŸ‘† link in pinned comment
    8
  997. You're not wrong. It's frustrating to me that the hacks out there give all of us technicians a bad reputation.
    8
  998. No worries I let them know so they can get one ordered
    8
  999. lol I eventually figured out the socket worked, kind of embarrassing hahaha
    8
  1000. Ā @PeteBetterĀ  youā€™re not wrong. I have thick skin though
    8
  1001. Well I knew right away that there was an internal failure due to the knocking nose. The scan tool showed me live misfires on cylinder 4. Having experience with these engines I immediately suspected a damaged lifter and bent push rod because it's actually quite common.
    8
  1002. It was 4/10 for me, I manage stress well
    8
  1003. Short Follow Up on the Off Duty channelā€¦ Duramax Inverter Dual Alternator https://youtu.be/De5B5jZ3RA0
    8
  1004. I think itā€™ll be ok. The downstream o2s are, ā€˜switchingā€™ suggesting that the cat is operating normally
    8
  1005. Sometimes šŸ˜
    8
  1006. I know weā€™re just as bad as lawyers
    8
  1007. This engine is a 4.3l with direct injection. 120k on the clock
    8
  1008. Brilliant! Absolutely brilliant! Iā€™m going to do it! Thank you!
    8
  1009. It does not affect it bc the rockers are solid mounted and have a base and bearings. Theyā€™re non adjustable. Any valve lash is taken up in the lifters
    8
  1010. We live in a time where that actually needs to be said SMH
    8
  1011. šŸ«”
    8
  1012. Ā @phantomwalker8251Ā  lol we donā€™t claim Bi-don (spelling for algorithm) Donā€™t let them fool you, these mfā€™ers arenā€™t dumb, they know exactly what theyā€™re doing
    8
  1013. Donā€™t worry I got one for tomorrow too šŸ˜‰
    8
  1014. Ā @michaelvoorhees2891Ā  my house is about 45 miles
    8
  1015. It is a 100 yr storm, that's a fact. But don't let the sensationalists scare you. They're talking like its the Apocalypse. I'm calling how it is and this ws a reminder to NOT FREAK OUT!
    8
  1016. Ā @ManexCorpĀ My problem is that the sticker conflates the two subjects. Please see above connects with regards to triggered. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø what we need to be recognizing (nationally) is that weā€™re all on the same team šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø Political division is rotting from the inside out, and calling people and things racist every second isnā€™t helping.
    8
  1017. Ā @chazamataz2000Ā  Donā€™t get me wrong, I love trolls. Theyā€™re like the kid that shows up at a car show claiming his 4cyl mustang makes 800hp and runs 9 second quarter miles, but he canā€™t race there anymore because he doesnā€™t have a roll cage. The rest of us get to listen to the verbal vomit and snicker at each other while they try so hard be part of the IN crowd. Part of you wants to take them in to teach them something, but their arrogance gets in the way.
    8
  1018. I am a regular guy. I realized that I have something to offer and you guys watch it every day. You keep watching, Iā€™ll keep recording
    8
  1019. Ā @scanningnycĀ  I pinned you bc you called it a scam. And what are you saying? You donā€™t want to be my friend?
    8
  1020. @Jeff Karpinski Iā€™m not rolling it Benjaminā€™s like that, but Iā€™m no fool with money either.
    8
  1021. Ā @AndyOamoĀ  Everything is going to be ok
    8
  1022. The build is done and heā€™s hoarding videos on it šŸ˜‚. The engine is on the truck on its way to me now
    8
  1023. Itā€™s good to be home
    8
  1024. It's a shame this engine will be flawless without the system
    8
  1025. She ran soooo smooth!
    8
  1026. Ā @frotobaggins7169Ā  weird right?
    8
  1027. Very true, I put myself to sleep sometimes when Iā€™m editing
    8
  1028. Ā @biffaozzie2373Ā  Dude, water is more efficient at heat transfer than glycol. Moving water/ glycol quickly through an engine will result in less heat transfer into the coolant. Moving coolant quickly through the radiator (liquid to air heat exchanger) results in inefficient heat transfer. Therefore, the heat source (engine) will operate at a higher temperature. As I said before... Thermodynamics
    8
  1029. Thank you!
    8
  1030. Ā @LA_CommanderĀ  Oh I know buddy, I see your comments! āœŒļøšŸ˜Ž
    8
  1031. Ā @donniev8181Ā  maybeā€¦but who can tell these days. Itā€™s the internet where everything is fake šŸ¤·ā€ā™‚ļø
    8
  1032. Thanks Tim
    8
  1033. Ā @dingusmagee3326Ā  šŸ¤£šŸ˜‚ Agreed. The haters/trolls are just doing their part. I like never running out of people that I can tell to "šŸ–• off"
    8
  1034. Ā @spacecowboy_1962Ā  ... You're an angry Elf šŸ˜±
    8
  1035. Blue is worth 2hp each wire. 6 hp if you have stickers
    8
  1036. We thought it went quite well šŸ¤£
    8
  1037. I could have been sweating inside of it for a half hour and dripping all over his interiorā€¦just sayin
    8
  1038. Ā @billbillinger2491Ā  They always come at 2 am šŸ¤·ā€ā™‚ļø
    8
  1039. Iā€™ll be ok out here šŸ«”
    8
  1040. I also need to try to separate the two worlds as much as I can. Just to minimize any conflict of interest. Therefore I donā€™t promote YouTube activities during working time.
    8
  1041. This one wasnā€™t really that bad. Iā€™ve seen far worse b4
    8
  1042. We made it out with our lives!
    8
  1043. Ā @tangodad3320Ā  reeeeeeee!!
    8
  1044. Ā @RekuzanĀ  šŸ˜‚šŸ¤£
    8
  1045. The hawk battle is real!
    8
  1046. You sir do not have a body control module that runs the higher load lamps. This newer dodge couldnā€™t handle the load
    8
  1047. https://youtu.be/W8jw2kwJ4oE
    8
  1048. Ā @garyparr5431Ā  You're not wrong. However pinched and folded wire still creates resistance on a very low voltage circuit. It's measurable with a DMM. Try it.
    8
  1049. Ā @garyparr5431Ā  Pinching a wire with a 180* bend will absolutely cause a resistance change. Don't believe me? Try running a garden hose with a 180* bend. Furthermore the national electric code specifically outlines the number of beds and the allowable radius that can be present in some wires/applications. These principals and laws of physics don't cease to exist in low voltage automotive applications. This is especially true in high and low speed communication circuits between modules where voltage is 1-5v. Call me crazy, call my fluke meter insane, physics is physics and can't be argued.
    8
  1050. Full Length Feature Video here! Tin Foil Oil Pan... Filled with Snake Oil! Jeep 3.7 https://youtu.be/6RVGO4hDKd0 More about Amsoil Power foam here: https://www.amsoil.com/?zo=30606222 Part Number APFSC
    8
  1051. Ā @leonardhirtle3645Ā ā€Why wonā€™t it READ!!??ā€
    7
  1052. This thing is so cool! Iā€™m šŸ’Æ impressed with how much technology is crammed into this little unit. I bet Gale had his engineering team ripping their hair out for weeks during development! šŸ¤£šŸ¤£šŸ¤£
    7
  1053. https://youtu.be/fLkH7fgH5Bc
    7
  1054. It needed new ones they were junk and I had already cleaned them with a spray
    7
  1055. šŸ¤£šŸ¤£ got another oneā€¦Youā€™ve been trolled. Check the end!
    7
  1056. Some things donā€™t need to be filmed šŸ˜‰
    7
  1057. Oh I got it! šŸ˜Ž
    7
  1058. You could use anti-seize I suppose. The trouble with lubricating threaded fasteners like a spark plug for example is any compound that lubricates will affect the clamping force when torque is applied. It could actually cause you to over tighten the spark plugs due to less friction on the threaded surfaces. If youā€™re aware of that then I could really see no risk in using anti-seize.
    7
  1059. Ā @vivian_musicĀ  remove the driveshaft from the axle and rotate the flange on the diff, see if it has play in the gears. Itā€™s best to do it with the rear cover removed to you can see if there is play in the differential. Pay close attention to play in the pin/gear case area.
    7
  1060. One can never have enough tools
    7
  1061. Hahaha! No worries regarding that tester! It has more life left! You fellas build amazing products at DC Power! Iā€™m so glad to have it! Thank you!!
    7
  1062. Any replacement will be a used engine and itā€™s probably in the same condition
    7
  1063. I'm getting some other stuff out of the way first. Probably going to get it apart Monday or Tuesday
    7
  1064. I'll get it
    7
  1065. I needed a day off šŸ¤·ā€ā™‚ļø
    7
  1066. What an idea!!! Wow!! šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚
    7
  1067. Ā @juliek2706Ā  Julie, at first it appeared that you and I were clashing. I think weā€™re on the same team. Be nice if the rest of the county would get on board and realize that people with a different point of view on certain things, does not make them an enemy. Even if they vote differently because of different opinions or experiences. It appears to me that everyone wants the same things/outcomes but weā€™re too busy bickering. You and I just made history. We found common in ground on the internet. šŸ˜³
    7
  1068. Ā @markbarbernitz6556Ā  ok here goesā€¦ What does Melania Trump see in Donald Trump? ā€¦Ten billion dollars and high cholesterol
    7
  1069. I left my lane on the broken line , legal
    7
  1070. I already said that the mustang guy doesnā€™t get the cash
    7
  1071. Ā @James-to7piĀ  itā€™s like death by 1000 wounds
    7
  1072. Ā @boggy7665Ā  must have been a piece that totally broke away. I think it was part of the swash plate
    7
  1073. šŸ‡ŗšŸ‡øšŸ’ŖšŸ’ŖšŸ’Ŗ
    7
  1074. Part 2!!! BBK Shorty Headers! Insta-LEAK! Ram 1500 5.7 https://youtu.be/sMzflWE05f4
    7
  1075. Ā @themysticuniverse2878Ā  Here comes the irony hereā€¦I posted this late today šŸ¤£šŸ¤£
    7
  1076. All there time. At this point most my my customers came here because of the videos
    7
  1077. 90% back to normal. I still have some residual tiredness, but much better
    7
  1078. Ā @michaelharris3296Ā  Iā€™m hoping that Don comes back so we can be friends again, heā€™s having a bad day. Iā€™d like to flip the script
    7
  1079. Any time!
    7
  1080. Ā @jcc3279Ā  Not my truck!
    7
  1081. šŸ˜Ž awesome
    7
  1082. Ā @mrhead5823Ā  Brilliant!
    7
  1083. Part 2 is HERE! Frustrating Diagnosis! It LIVES AGAIN! Jeep Wrangler 4.0 https://youtu.be/ZPBWAGcc-8M
    7
  1084. The good ones have been sold out around here lately so I had to get the harbor freight gloves. I have good ones again!
    7
  1085. I was thinking that when I learned he just bought it.
    7
  1086. Thank you for being here!! ā¤
    7
  1087. Itā€™s mine now
    7
  1088. šŸ¤£šŸ¤£šŸ¤£
    7
  1089. Iā€™m gonna put this to the ultimate test when I get to Jax. Iā€™ll see if I canā€™t score of set of injectors for my LBZ Duramax, and then Iā€™ll install them and see what theyā€™re about.
    7
  1090. I think it took just over 3
    7
  1091. Ā @xbahamutzeroĀ snow sucks
    7
  1092. Iā€™m going to have to get it on the lift and check it out after this week.
    7
  1093. Ā @clbcl5Ā šŸ«”
    7
  1094. Then they should love the huge fire at the end šŸ¤£šŸ¤£
    7
  1095. I get 1-2 per month. Same problem, different cylinders. It's always the intake lifter that fails. It's the same part number for intake and exhaust lifters. Little odd.
    7
  1096. AvE is my hero. And my favorite Canadian. Thanks for the sub I'm glad you're here!
    7
  1097. The GM v8s have a system called active fuel management. It basically allows the engine to run on 4 cylinders. They achieve this by those special lifters with the springs on the outside of them. There is a manifold That sends oil pressure to the injectors when four cylinder motors commanded and this causes the valves to stay closed simultaneously fuel is cut off. This is done to achieve better fuel economy numbers by allowing the V8 to run as a 4 cylinder. The new generation LT series v8s have these lifters on all eight cylinders. When I say AFM event that's the transition period from V8 mode to 4-cylinder mode and on the new LT's it can cancel up to 7 cylinders at a time. Running on one cylinder is rare, usually only happens if you're coasting downhill for a long period. of time
    7
  1098. So does my 07 šŸ¤£
    7
  1099. Lift kit!!!
    7
  1100. Get right up in there for the best view possible!
    7
  1101. Thx my title was built with Kia quality šŸ¤™šŸ˜†
    7
  1102. It was. I work at a dealer.
    7
  1103. I havenā€™t installed them yet, I have a set of vents fans for RV applications that will bring air into and out of the box. Iā€™ll run one fan on a manual switch and both will have an automatic thermostatic switch.
    7
  1104. Book time was 10.8 and I think I had around 8 hours total into it.
    7
  1105. Sneak peek here! https://youtu.be/mrTIxB9WoCo
    7
  1106. Ā @christophermeyer6414Ā  I barely heard any of the story. They never mentioned a thing about overheating, or repairs to the cooling system. Iā€™m certain thereā€™s more to it
    7
  1107. I have to get the alignment guys to do that, car has to be on the ramp
    7
  1108. "Scraps to the trolls" šŸ¤£šŸ¤£šŸ¤£
    7
  1109. Very rare indeed!
    7
  1110. Savage!!!! You gotta let someone else win šŸ¤£šŸ¤£
    7
  1111. Sure was
    7
  1112. The metering tube is inside of the line between the connections. Itā€™s supposed to have a pressure differential. Great observation!
    7
  1113. šŸ‘‹šŸ‘‹
    7
  1114. Seriously! I wonder how they would feel if I trolled their FB
    7
  1115. Iā€™m sure the customer was the ā€œ other guyā€
    7
  1116. Green eggs and ham? šŸ¤£šŸ¤£
    7
  1117. Ya heā€™s here FOREVeR!
    7
  1118. Ā @scanningnycĀ  Iā€™m not going to block you. This thread is some superior quality entertainment. šŸ˜
    7
  1119. I did šŸ˜ˆ
    7
  1120. Pt 2 Follow up. New PCM Car Misdiagnosed by Mechanic! Wasted Spark Ignition System! https://youtu.be/yUP5QzJfEwk
    7
  1121. Reeeeeeee!
    7
  1122. Awesome! Thank you! šŸ˜Š
    7
  1123. This isnā€™t an AI thumbnail so you just won the smartest person comment award šŸ„‰
    7
  1124. The coast was pretty clear when I pulled over. Then the traffic came. I didnā€™t film it but I was waving cars over into that other lane for a moment to get them clear of the hazard. I wish I had my head mount, would have been perfect for the situation!
    7
  1125. Oooh thatā€™s a bad one I cringe for you in that
    7
  1126. I'm on the mend!
    7
  1127. Yes very ā€œcopperyā€
    7
  1128. Ā @SpencerDT6Ā  you forgot the part where I said it was after hours
    7
  1129. Canā€™t get the girls in a cobalt šŸ˜…šŸ˜€šŸ¤£šŸ¤£šŸ¤£šŸ˜‚
    7
  1130. No the orange color of the runs, is from the mount oil not engine oil. (Was waiting so see this comment) šŸ‘
    7
  1131. Ā @kg-WhatthehelliseventhatĀ  depends, sometimes itā€™s the next day, sometimes it takes up to a week
    7
  1132. I thought of you and Linda during that moment!
    7
  1133. Yea the Freedom Factory parking lot washed out the entrance pretty bad and the water took the pavement with it.
    7
  1134. We really do! The subcultures are real
    7
  1135. That you much šŸ˜
    7
  1136. She can do whatever she wants whenever she wants! šŸ„°
    7
  1137. šŸ¤£šŸ¤£šŸ˜‚ Check out this guy. Been trolling me far a couple days now! Is this Jacob? BTW bro, you still havenā€™t explained to me how I rip people off.
    7
  1138. Ā @katieyoung3669Ā  It is a democratic republic. We democratically elect representatives from our locals who represent their districts. Those representatives then assemble make decisions based on the will of their constituents (the people). This is why she have local state and federal bodies. We cannot have a true democracy, nor can we have a republic. Democratic society is just mob role. And republics are breeding grounds for corruption. Checks and balances are critical, especially for a country as large and diverse as they United States.
    7
  1139. Lol. Everyone agrees on YES
    7
  1140. Iā€™ll wait here
    7
  1141. No removing the pan wouldnā€™t have helped. Removing the dipstick tube would have made a world of difference. But it was rusty and I didnā€™t want to risk breaking it off in the block.
    7
  1142. I can just get my own shop
    7
  1143. Welcome to the party šŸŽ‰ enjoy šŸ˜Š
    7
  1144. Ā @mrbags5497Ā  They NEVER return the thermometer, Brel losing them for over a decade
    7
  1145. šŸ¤¢šŸ¤®
    7
  1146. Good to know my guy thanks for letting me know
    7
  1147. Have no fear, stained gloves donā€™t dirt up the interior. I assure you I donā€™t leave oils behind. I replaced both clips with new ones, only threw away the old one.
    7
  1148. Ā @greggc.touftree5936Ā  yea you get it šŸ¤£
    7
  1149. I was late
    7
  1150. I have heard such things and have never ever seen it occur. Been compressing calipers without opening the bleeders for years.
    7
  1151. Ā @joshgardner2831Ā  sheā€™ll be just fine in Orlando, no worries there
    7
  1152. Stupid comment
    7
  1153. Slow down hot rod, buy me a drink first
    7
  1154. Ā @bradhaines3142Ā We all have something brother šŸ«‚
    6
  1155. I have itā€¦ itā€™s pending installation. Next to my exit sign that I havenā€™t hung yet šŸ˜¬
    6
  1156. My insanity has not limits
    6
  1157. Eye just passed over us at 12:30 ish. Wind has switched 180* On the back side now, still pretty intense. Stuff is slamming into my house right now. Weā€™re ok.
    6
  1158. Lol I was close
    6
  1159. Oh yea I have videos hidden all of the time. Descriptions, end screens and pop up tabs are how to find them. I do that so folks can watch multi-part videos on one stretch if they want. Sometimes they get posted live like this one, sometimes they remain unlisted forever. Hereā€™s one https://youtu.be/BDIMI28McW0
    6
  1160. Google maps šŸ˜‚
    6
  1161. Iā€™ve been to court before and documents save that day! Always document and always get the hard copy signed. Even if no work was done. One time we forgot to put an engine cover back on an escape, I was store manager. The customer came back and said we left his cover off, turns out the guys threw it away(it had been at the shop for several weeks in a corner) So I bought him a new one from ford , installed it, apologized and send him on his way. I was served two days later in small claims court for emotional damage, pain and suffering, the cost of the engine cover (that we had already replaced) and the cost of the original repair. I believe it was a fuel injector. The judge wasabi too happy with the customer after I presented my documents and video footage.
    6
  1162. If the frame suddenly broke I could have been crushed. There was a lot of weight in the dump bed. šŸ˜¬
    6
  1163. I was first
    6
  1164. Quickie lube ur mom
    6
  1165. Meh šŸ«¤
    6
  1166. Insurance, this is the way
    6
  1167. Donā€™t listen to any of these comments, theyā€™re all Bots
    6
  1168. šŸ‘€
    6
  1169. Ā @phreakyzeke2864Ā  Final drives and tracks huh? Boy r u going to be mad when I start working on heavy equipment
    6
  1170. He kinda didnā€™t want to hear it
    6
  1171. I was absolutely furious that the kid was handed this job. He had no business working inside this engine. But we're just dumb mechanics as far as managers are concerned, what do we know? šŸ¤·
    6
  1172. Thx Barb
    6
  1173. Ohhh yes I can! šŸ¤£
    6
  1174. Sorry to hear you guys are under lock and key right now! I've seen videos of the situation and I'll say I very much disagree with how it's being handled down there. I sympathize with you and I hope things calm down. I fear that the whole world is a breaking point.
    6
  1175. 8mpg! šŸ¤£
    6
  1176. I did the hard way ig šŸ¤£
    6
  1177. I will not try to kill you šŸ˜‰
    6
  1178. Ā @juliek2706Ā  Oh I wasnā€™t happy about it 20 years ago when it started either.
    6
  1179. You get into the 40s while driving. The system really needs good airflow over the condenser. Usually wonā€™t happen at idle
    6
  1180. I sneak my stuff in when Lauren isnā€™t looking šŸ¤«
    6
  1181. Mustangs are dangerous, my bumper keeps me safe
    6
  1182. Iā€™m surprised there wasnā€™t a deputy hanging out, theyā€™re usually in the area on Thursdays
    6
  1183. Ā @kevincurry4735Ā  all of ye with little faithā€¦ If I was going to set something up, it would be better than a broken carrier bearing
    6
  1184. Itā€™s just too many dollars and no donā€™t see the value right now, thereā€™s other things the shop needs
    6
  1185. šŸ¤·ā€ā™‚ļø misfiring in the brain due to lack of sleep
    6
  1186. And then some
    6
  1187. I was first. šŸ¤£
    6
  1188. Ā @emmettturner9452Ā  pinned! And oops I thought I pinned it already
    6
  1189. Ā @jwarmstrongĀ  if they canā€™t pass a drug or background tests, how did they get the job?
    6
  1190. I start jamming out to the polka beat and start chanting about Doritos šŸ˜­šŸ˜­šŸ˜­šŸ˜­
    6
  1191. We have the lower cover, it was already removed before filming
    6
  1192. Dont read that much into it :P
    6
  1193. Eeeh thatā€™s all I had
    6
  1194. Learn something new every day! Especially from SMA!
    6
  1195. Inspection Video: Car makes Helicopter Noise (Parked for Years) while driving & NASTY Vibrations! Ford Taurus 3.0 https://youtu.be/QoYRv54lmgQ
    6
  1196. ok
    6
  1197. Ummmmm šŸ˜³
    6
  1198. If I get to do the teardown, I'll definitely make a follow up video.
    6
  1199. Ā @Kowalsk_the_wĀ  In finishing up dinner other jobs. This one is coming up. I'll make a follow up on it.
    6
  1200. Ok maybe itā€™s not 30x I make a bit more then $20/hr
    6
  1201. Always hire a professional! šŸ˜‰
    6
  1202. Old place still.
    6
  1203. Thatā€™s a negative. Iā€™m sure there is some specific model out there that requires that procedure, but for 99% off the vehicles out there, opening a bleeder isnā€™t necessary
    6
  1204. Thank you very much!
    6
  1205. Ā @crowttubebot3075Ā  I donā€™t think dude even watched the vid
    6
  1206. Ā @ianriggsĀ  šŸ¤£ thatā€™s the best part, itā€™s an equipment demo vehicle
    6
  1207. Well dang I thought I was being inclusive
    6
  1208. Not truthful itā€™s just as bad
    6
  1209. The voices are getting louder šŸ˜‰
    6
  1210. Itā€™s nice to do something different every now and then
    6
  1211. Video stays up, everyone is behaving
    6
  1212. Why don't the manufactures use anti seize when they build them?
    6
  1213. This is the way of the internet! šŸ¤·ā€ā™‚ļø
    6
  1214. Non chlorinated
    6
  1215. The problem is that people buy cars that they canā€™t or wonā€™t maintain.
    6
  1216. Iā€™m in the south we just make up sounds as we go along
    6
  1217. I tried to get pressure regulators for them a year ago...when I asked for a pair of Lincoln Electric Oil Drains aaand then the boss took a trip to harbor freight.
    6
  1218. Yea in dealer. It's warranty work
    6
  1219. šŸ‘šŸ‘
    6
  1220. Ā @unclegreybeard3969Ā  lol every time šŸ™ƒ
    6
  1221. Indeed I am. AVE has been a role model of mine fire years. Please note that I do not attempt to emulate Ave with my content. I just say what I'm thinking without a filter. Much of it, is actually a coping mechanism that stems from years of stress and horrors that the industry has subjected me to. šŸ˜ Thanks for watching I really appreciate all of you!
    6
  1222. Yes indeed! We thrifty types love the junk yard! Theyā€™re full of classics!
    6
  1223. AvE!!!
    6
  1224. America was before me
    6
  1225. Automatic pilot šŸ¤£šŸ¤£
    6
  1226. Wait till I publish this video, the Reeeeee will come in full force
    6
  1227. Ā @shawnwimberly9294Ā  The owner said it was fine for few days and then it did the same thing. They replaced it because Iā€™d the super low power level. Led me to believe that the exhaust restriction was the problem the whole time.
    6
  1228. lol I do sometimes, but then the interwebs goes full reeeeeee because ā€œyouā€™re doing it wrongā€ šŸ˜‚šŸ˜‚
    6
  1229. I didn't care for it either. But according the the rules of warranty work, I can't have two problems. GM would rather I saved the TXV for next time. Plus the value was "within spec" according to the GM chart. My way would have replaced the TXV, recharge and send it. Gotta play the game.
    6
  1230. I canā€™t remember the make. Probably a Ford. But it was from the late 30s. Had to replace a trans seal, and it was made of leather.
    6
  1231. Well said šŸ«”
    6
  1232. I can run my camper power and supply power to my cargo trailer too
    6
  1233. I had one little 8mm bolt left over. Your right must always keep one, even if you give back 3 or 4
    6
  1234. Everything you just said is true
    6
  1235. Ā @frankbizĀ  Possibly, but because one of the the mileage, I'm going to have the stem seals replaced. The #6 intake has a HUGE leak and I it has a valve seat problem. My customer would like all of the valves and seats reground rather than just the ones with leaks.
    6
  1236. Ā @AudreyBratailyĀ  oooh no keep commenting my friend!
    6
  1237. I spent their budget on the exhaust šŸ¤£šŸ¤£
    6
  1238. Lifetime warranty. And if an older item is discontinued (like this one) then I get a brand new one
    6
  1239. Part 2: Extremely Tight Squeeze! 2005 Ford Expedition 5.4 https://youtu.be/Zhjo_uBT2bU
    6
  1240. Just too risky to try generic rings. I tried to fit some from my master kit and they were the right diameter, but not thick enough. Using generic would have cause a no oil pressure problem
    6
  1241. Crazy times they are! One thing is for certain, nothing will ever be the same again. I miss the 90s
    6
  1242. All of them!
    6
  1243. Got cha, you didnā€™t watch the end šŸ˜‰
    6
  1244. Part 2 is Ready! https://youtu.be/QEfIqy9tuNI
    6
  1245. Ā @grendel1960aĀ  the nut actually was an error, it messed up my plot
    6
  1246. Ā @edbenson98Ā  I know! Dude is super serious about 5cca on a battery test. I think this guy trolls for fun. Heā€™s been watching for months and always has something outlandish to say. šŸ¤·ā€ā™‚ļø Itā€™s fine tho, everyone needs to vent. Iā€™m here for him. šŸ˜‰
    6
  1247. Ā @scanningnycĀ  go back at watch it again
    6
  1248. Ā @scanningnycĀ  Ray doesnā€™t charge the fact that youā€™re making a mountain out if a mole hole. Seriously youā€™re nit picking at a non issue
    6
  1249. Everything is going to be ok
    6
  1250. I can tell that was speech-to-text šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    6
  1251. They can be a real bear to bleed out all of the air. I do a couple restarts and cool down cycles (Edited out) to purge it.
    6
  1252. It was my pleasure sir! Nice to meet you as well. Take care! šŸ˜‰
    6
  1253. Ā @Ajme-kb4osĀ  thatā€™s not true
    6
  1254. Lol im not done with details yet...autocorrect :face-green-smiling:
    6
  1255. lol itā€™s the Chris Farleyā€™s van down by the river
    6
  1256. Ya know weā€™re all in two different camps because itā€™s designed that way. We all want the same things šŸ«‚
    6
  1257. Bet you leak oil tho šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    6
  1258. Ā @tda2806Ā  colonial measurement system šŸ¤£
    6
  1259. Iā€™m camera shy, give me time
    6
  1260. Yes itā€™s a shop tool. Itā€™s ok they wonā€™t be test with me if it breaks. Im the go to guy šŸ˜
    6
  1261. You donā€™t want to pour it spray a bunch of water on a hot engine because it could possibly cool there metals off so quickly and unevenly that they break. Especially exhaust manifolds. Actually if water gets into spark plug his it can care a misfire until it dries. This applies more to older cars in my opinion bc there were 4cyl designs that would hold water in the valve cover and fill the plug holes. Also engines with distributors do not like getting wet
    6
  1262. šŸ¤£šŸ¤£ that actually happened. I needed 1ā€ and had to adjust some zip ties
    6
  1263. LOL correct you are. In this particular case it refers to the flat head screwdriver vs 5/16' or 8mm nut driver when operating as hose clamp. (See the Fuel Spraying video)
    6
  1264. I'm at loss for words... This could very well be the best comment I have ever read in my life. I thank you for this.
    6
  1265. Never get in with roaches they will come home with you (eggs on shoes and clothes)
    6
  1266. Loss of Control, Sloppy Steering! Damaged Ball & Socket! 2007 Ford Escape https://youtu.be/0co0Kvjri9w
    6
  1267. You must have misunderstood. What I said was that repair will outlast the life of the tire, meaning that itā€™ll be there longer than the tire tread will, āœŒļø
    6
  1268. Ā @victorgirouard1543Ā  oh I make plenty at my day job. But why not make more? Thereā€™s a saying: your 9-5 pays the bills, the 6-10 builds your empire!
    6
  1269. I like that balance!
    6
  1270. not yet, this one isn't even posted live. You're here early
    6
  1271. Itā€™s what I had laying around
    6
  1272. A glued on valve cover doesnā€™t mean that the engine swapping shop did that. Youā€™re assuming that replacing with a junk yard engine means reseal everything and thatā€™s not the case
    6
  1273. Ā @FollowingtheCliffNotesĀ  If you moderate me I'll moderate you
    6
  1274. I do that. The purple stuff is permatex ceramic extreme brake parts lube. Itā€™s good for high temp applications like caliper slide pins
    6
  1275. Ā @christopher88719Ā  And there's no shame in charging to diagnose. It worth it to you and the customer. They pay for the time to diagnose add confirm. Then they can make the decision, rather than being "sold" a job because the tech says so.
    6
  1276. Ā @forgetfulme1719Ā  Or it gets disposed of properly.
    6
  1277. Ā @scottzehrung4829Ā  I gave a good one on that F150 at 6am no worries. šŸ˜‰
    6
  1278. FR!
    6
  1279. Ā @BillMalcolm-tn3kqĀ  well thatā€™s a lot of salad, allow me to replyā€¦.Lauren works in the office, weā€™re in Fl and she can wear flip flops if she wants. Iā€™m not about to wear body armor in 95 degree heat and die of heat stroke. The lift that broke last week is waiting for the lift company to come fix it. Iā€™m going to have it repaired and then Iā€™m going to replace it with a 4 post. My junk yard full of cars is what happens at a shop, this is like wondering why a hospital is full of sick and injured people. My conex box was placed where it would fit, AND it creates a good visual barrier to block the neighboring lots that is an actual junk yard. Iā€™m not responsible for their mess. I Do Cars Eric is literally BUILDING the Tosi fam a new(ish) engine. These things take time. My apologies if you donā€™t like my fast paced thought process sounds like a you problem IG. I hope that clears things up.
    6
  1280. The part finally came in, and there is more wrong than I thought. Watch part 2 now! https://youtu.be/lzkcmpvERCo
    6
  1281. There absolutely be a future! There will always be machines and they will always break.
    6
  1282. I suspected a master cylinder right away. If thereā€™s air in the system you can pump the pedal a few times and achieve a solid brake pedal. This particular vehicle was never able to achieve any kind of suitable brake pedal. I did perform a visual inspection of the calipers pads and rotors and found no fault. This indicated to me that the brake master cylinder had an internal leak and wasnā€™t able to build pressure.
    6
  1283. Iā€™m on the mend I think. Been improving for the past couple of days. Energy is still super low but itā€™s coming back.
    6
  1284. For realz, I thought what I said was perfect clear, but folks need to reach for the drama sometimes
    6
  1285. Thank but Iā€™m not perfect by any means
    6
  1286. Glad to have you my friend!
    6
  1287. Ā @cengebĀ  šŸ¤£šŸ¤£
    6
  1288. Iā€™ve never been much of a wrench thrower, but Iā€™ve had a few choice expressions from time to time
    6
  1289. Because theyā€™re losing their minds
    6
  1290. Theyā€™re too far gone when nobody wants to maintain it anymore. Iā€™ve seen folks spend thousands on a Chrysler Lebaron, and weā€™ve destroyed classics for tax breaks. (Cash for clunkers)
    6
  1291. It does in fact empty the torque converter
    6
  1292. Ā @sekiro8980Ā  Iā€™ve got the 1/4ā€ bit driver, 1/2ā€ impact, two of the drills, circular saw and the sawzallā€¦ and a router
    5
  1293. Thatā€™s interesting thx
    5
  1294. I get free hats and pocket screwdrivers from BG guy. šŸ¤·ā€ā™‚ļø
    5
  1295. Ā @drfingaz889Ā  Thank you too!
    5
  1296. Ā @DaveBigDawgĀ IDC about other peoples politics, itā€™s no different than having an opinion about their religion
    5
  1297. Ā @Roaming_WolfĀ I have no clue who the party nominated. Iā€™m liberatian by definition not affiliation. Their political moves are meaningless to me
    5
  1298. I keep banning them and they continue šŸ˜”
    5
  1299. Ā @UTubeHandlesSuckĀ  šŸ˜‚
    5
  1300. Thatā€™s called economical warfare it goes hand-in-hand with biological warfare followed by psychological warfare
    5
  1301. YT is like a second job, that I work on my lunch hours, after dinner, and a couple more hours after the kids go down. Plus half days on Saturday.
    5
  1302. Ā @FollowingtheCliffNotesĀ  as soon as I find the appropriate airport barā€¦ headed home, I canā€™t tolerate Vegas for 5 days straight šŸ¤£
    5
  1303. šŸ¤£šŸ¤£ I remember that one!
    5
  1304. I thought I was going to be grinding for sure
    5
  1305. Some kind of lettuce and fruit mixture. I'll eat a salad on occasion but only before the steak
    5
  1306. Not first
    5
  1307. šŸ¤£šŸ¤£
    5
  1308. I was dragging trees away with it, moving equipment on trailers, hauling materials etc. me moved over 20000 lbs of gravel last week
    5
  1309. Ā @markbranton1240Ā  this is the way
    5
  1310. I was busy
    5
  1311. Cold, they always end cold.
    5
  1312. Ok so Iā€™m very right handed.? So much g that my left was useless. As personal challenge I started to do many things left handed in order to train my brain to operate that hand with efficiency.
    5
  1313. Drains are dumped every night
    5
  1314. It's technically not my skid. The owner has moved out of state, we have a "handshake lease" agreement. I could buy it or could tell him to sell it. But the trailer is mine and it's quite useful, I can move cars long range without the burden of pulling the cargo trailer. (Yes I have a trailer problem lol)
    5
  1315. Ā @scolley0616Ā  please do, we would love to have it! Did you find the address on the home page in the ā€œaboutā€ section?
    5
  1316. Same shop, everyone is understaffed. I wonder what the whole population is doing all day. It seems like everyone is out consuming but nobody is producing
    5
  1317. Kids these days šŸ¤£
    5
  1318. its in the low to mid 90s with super high humidity. And it rains often this time of year.
    5
  1319. šŸ¤«
    5
  1320. Ā @4englishlies875Ā  Iā€™ve seen variations of trolls named Mitch over the years. I suspect itā€™s personal with these Mitches. But I donā€™t know a Mitch in real life however, I do know several little mitches. The assumptions are endless given the current little mitch never replies. Iā€™ll continue to pin this little mitch until we have answers. Rando trolls are one thing, but I canā€™t abide no lil mitch šŸ˜‰
    5
  1321. Thats out of lineā€¦like a pretty far. Itā€™s unfortunate that youā€™ve chosen project negativity into my personality. Do better
    5
  1322. I've heard that a lot today...What have I done??!
    5
  1323. You're not wrong. I was at shop years ago that would engage in shady practices like that. A private phone call from me to the customer usually set things straight. šŸ˜‰ Technicians and mechanics have a bad rep. And it's usually because off asshole business owners and store managers. šŸ¤®
    5
  1324. Thanks Bill, I'll look for that book. I'm pretty sure that I had the wire speed too high, and the voltage was probably to high. I've had since decent success with thicker metals before and I have achieved better welds that what y'all saw. Im familiar with settings and the reasons why those settings need to be used. I think some book time will do me some good. Thanks for watching!
    5
  1325. How about ā€œrear axle assembly?ā€
    5
  1326. Because then everyone would know where I live
    5
  1327. Yea no only fans, a man doesnā€™t let other men have access to his wife for $3
    5
  1328. It was saw that too when I edited. Itā€™s fine, the engine gets and oil rinse before it starts again
    5
  1329. Yea we can, you canā€™t really get the water pump bolds with the transmission stalled
    5
  1330. You just not have heard the commentary about setting up the gears/preload/backlash etcā€¦
    5
  1331. šŸ˜‰šŸ‘
    5
  1332. Ā @NoWr2RunĀ  didnā€™t get more of the firebirds, they were both mint tho! I knew it was real mileage bc the needles on the gauges werenā€™t faded, the truck hadnā€™t seen much UV light
    5
  1333. I usually donā€™t feel the need to go thereā€¦. But this Ukraine situation and recession that weā€™re entering has me kinda pissed.
    5
  1334. I have a unique audience šŸ¤£
    5
  1335. Glad youā€™re here! Thanks
    5
  1336. You missed the part where I said that I flushed out the rest of the system.
    5
  1337. I recorded this video from the future
    5
  1338. Glad to be here! šŸŽ‰
    5
  1339. Iā€™m afraid we lost the cup this time šŸ˜ž
    5
  1340. Hindsight is always 2020
    5
  1341. Ā @Liquid_PlasmaĀ  indeed the math is not mathing, We figured the trailer suspension suspension was going to carry the majority and the stands were just to keep it from tilting. And that worked, 60% of the time
    5
  1342. Iā€™m building a voter base now
    5
  1343. Ā @jwarmstrongĀ  Forgive me for speculating. Your comment suggests that you attended a private school, as it appears that your coming from a position of superiority. However, you also indicate that youā€™re a parts delivery driver. Forgive me, but if both are true, I must ask why you didnā€™t get a better job.
    5
  1344. Itā€™s totally fine IMO the difference is negligible. I do it right for the folks that find it meaningful . It would bother some to know that one is different than the rest. Plus I donā€™t rant to read their ā€œreeeeeeeā€
    5
  1345. I have learned to accept the things that I cannot change (or I can change it but itā€™s not worth the effort)
    5
  1346. The matrix is real
    5
  1347. Backups for your backups
    5
  1348. Worse than the Avalanche
    5
  1349. Sure was, these things are great!!
    5
  1350. Sure thing, Iā€™ll post it in the second channel!
    5
  1351. Letā€™s not burn down our own cities again šŸ˜‰
    5
  1352. Wanted to give the lube time to work on the nuts
    5
  1353. No cellars in Fl, we have hurricane panels for the windows
    5
  1354. They screw into this particular hub, like a BMW or Mercedes
    5
  1355. When you put it like that itā€™s all becoming clear to me, I hope I donā€™t overload my brain with multitasking
    5
  1356. Ā @tankmaximusĀ  šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤£
    5
  1357. I have! And I want them. Iā€™m going to swap my trans soon and the Banks pans will probably go in when I pull the cab off. (Iā€™m planning a major powertrain overhaul soon that includes a turbo and plumbing)
    5
  1358. Ā @saltyhuckleberryĀ  the salt must flow! Reeeeee!!
    5
  1359. Itā€™s in the wayā€¦ Iā€™m editing the second now. Expect it the weekend! šŸ˜Ž
    5
  1360. That is a ratcheting head that fits onto an extension. Made by blue point witch is brand of Snap On
    5
  1361. I hope so! My kids have a tough world in front of them. šŸ˜¬
    5
  1362. Nope , not when it's damage control time.
    5
  1363. I think it has every banks part available in the back seat
    5
  1364. šŸ¤£šŸ¤£šŸ‘
    5
  1365. Ā @mikeherrera-es4tyĀ  coolant filter? Brake fluid filter, diff oil and PTU fluid filter, there isnā€™t a trans pan because itā€™s a transaxle, itā€™ll take 10 hours to replace the filter screen for no reason. Both methods have their place for sure.
    5
  1366. 20ā€¦did I say 30 šŸ¤·ā€ā™‚ļø Lol my brain and mouth donā€™t always agree
    5
  1367. No no noā€¦. Not sponsored. I stuck the logo in there hoping their marketing algorithm finds it and flags it for review. Then they can be my sponsorā€¦.Iā€™m fishing
    5
  1368. NOoo waaaayyyy
    5
  1369. Thatā€™s not how that works. It went how I said, I pissed them off, they called me, we talked about it, now weā€™re going for a visit
    5
  1370. Did you see that embedded silicone sealant inside of that groove? failing to remove that can cause a very poor seal and it will leak. Plus this one being a diesel. There was no coking or sludge buildup. Therefore, they cleaned up much easier than a gasoline engine. On top of that there is four pieces to clean as opposed to one, so naturally it took longer.
    5
  1371. The motor portion yes, the gear portion no.
    5
  1372. Be the change you want to see
    5
  1373. Letā€™s keep going
    5
  1374. Ā @robochrisc2891Ā  they fixed it with the car still there. No danger, the lift arms were resting in the locks
    5
  1375. Ford Techs and 6.7 owners... check out this petcock valve tool for your 6.7 radiators! https://rainmanraysrepairs.com/product/ford-6-7-radiator-petcock-valve/
    5
  1376. Rodents brought it in. No filters, itā€™s from a time when cabin filters werenā€™t a thing
    5
  1377. Negative, it was just straight hose. No forms out bends.
    5
  1378. Thanks! šŸ˜±
    5
  1379. šŸ˜‚šŸ˜‚šŸ˜‚šŸ¤£
    5
  1380. Ā @davidlee231Ā  I donā€™t censor people, thereā€™s enough of that going on these days
    5
  1381. lol the old harbor freight ā€œmaster kitā€? I never get to use any of mine either
    5
  1382. Yup. GM has the bill today.
    5
  1383. Check out Part 2 here. https://youtu.be/jlb_uvl-mYQ
    5
  1384. šŸ˜ You almost made first place this time!
    5
  1385. Ā @jeffcuevas5918Ā  https://youtu.be/zczBVy7jE0w Here's part three of the series. There's a button at the begging for part 2 also. I handled three manager overreach situation. You'll see about half way through this one. The video isn't public yet, but you guys are cool. šŸ˜Ž
    5
  1386. Gear wrench tools is way ahead of you. They make a set called the perfect 10. It is a rail of 10 10 mm sockets. It comes with shallow, medium, deep, swivel and magnetized. I bought one in quarter inch drive and 3/8 drive. I'm down to about five sockets now. šŸ¤£
    5
  1387. Ohhh I was watching that fender too
    5
  1388. I didnā€™t realize it was a bracket šŸ¤¤ Jokes on me igā€¦Subaru things
    5
  1389. Ā @jefferybye2169Ā  because I can see watch times and viewer interest compared to video length. And videos over 45 minutes arenā€™t watched. People like 10-30 minutes, so thatā€™s what I make. However, sometimes I just canā€™t condense things enough, therefore Iā€™ll make 2-3
    5
  1390. Ty! šŸ˜
    5
  1391. Oooh no no no, I vote in person on the day of
    5
  1392. Iā€™m trying to get to a scholar level
    5
  1393. Cha Ching!
    5
  1394. Personally affected, family and friends have been displaced. Family home is damaged and uninhabitable.
    5
  1395. Sometimes we can only speculate. I never get the full story when it comes to things like this.
    5
  1396. Ā @stans5270Ā  Serious? You didn't see the fluid filled brake booster. Slow down hotrod. You must be new here
    5
  1397. Ā @BustedWalletGarageĀ  ouch sorry it took so long. I recently had a 21 Sierra work truck that lost a fuel pump. It took four weeks to get a new pump. This is 2021 nothing goes like it used to anymore. Everyone's sitting on their asses and not going to work.
    5
  1398. Congrats on that ASE! Good job!
    5
  1399. Yea me too. This time I basically just informed them of the problem after I solved it. That way I could get a case number to collect my 1.5. But they really do want to "make sure they we have all the information needed to properly diagnose." This time they didn't even send me docs that I already read. šŸ¤£
    5
  1400. They use attractive female body parts to get attention and then establish communications through comments. They lure they viewers away to get their money.
    5
  1401. Actually yea. I was having some coffee at work a few weeks ago, and a customer walked over and said ā€œyouā€™re that famous YouTuber rightā€ I was kinda blown away in the moment. I said Iā€™m just a regular guy like everyone else. I still feel that way today. My goal was never to be famous or anything like that, I just wanted to give insight and share whatā€™s itā€™s like to work in the automotive industry. The channel has grown far beyond anything that Iā€™ve ever expected and it still blows my mind to look back. But my goal is still the same now as it was before. Iā€™ve said before, itā€™s not about me, itā€™s about being in a position to help someone else!
    5
  1402. He wanted nothing to do with that option
    5
  1403. Bro I donā€™t want it! Iā€™m still feeling my Saturday night šŸ¤£
    5
  1404. I cant just sit here with a voice an let the world turn to sh*t. I have opinions just the everyone else and maybe folks need to hear it. If it costs me, so be it, men before me risked their lives for their convictions, I'll risk my reputation (and more) to protect and conserve their legacy.
    5
  1405. Ā @cheeseburger3209Ā  Hahahah yes it isā€¦Coffee is enough for me šŸ˜‚
    5
  1406. Heā€™s 4 .. this kids is a trip ! šŸ¤Ŗ
    5
  1407. Rob we have professional pan handlers around here, they share babies (actual infants) to gain sympathy at intersections. The entire town is full of ā€œnow hiringā€ signs, including three waffle houses which are known for hiring the homeless. Those people choose their path in life just like the rest of us. And youā€™re right,I donā€™t have a portable air compressor.
    5
  1408. Hangin in bro. The grid is down, running the generator. Had to wedge a chair against the front door, the wind is pushing water into the house
    5
  1409. 98* yesterdayā€¦TGIF
    5
  1410. I'm going to premier one for Independence Day just bc you said that Hahahahahahaha
    5
  1411. Ty šŸ˜Š
    5
  1412. šŸ‘‹
    5
  1413. I think weā€™ve been in recession for about two years now
    5
  1414. Ohhh itā€™s ON!
    5
  1415. I used 4 on the car already, and theyā€™re still surviving inside.
    5
  1416. And 99% of us will ignore that, as you canā€™t hang your hat on hopeful news
    5
  1417. Bout 300 ft/lbs
    5
  1418. No politics, just opening up a discussion.
    5
  1419. Yes
    5
  1420. I've been sick this week
    5
  1421. The pendulum always swings
    5
  1422. Working on it right now!
    5
  1423. Ā @deanjrla552Ā  I think I totally misspoke and missed it. It was 91k non 191k
    5
  1424. The guy who built my house indexed all of the screws in the switch and outlet faceplates making every one of them horizontal. Thatā€™s attn to detail!
    5
  1425. The bed on this truck was huge. It has a dump box for landscaping and itā€™s too wide to fit
    5
  1426. I mean yeaa it's got a little blow by
    5
  1427. Ā @dans_Learning_CurveĀ  she had a day with over 1000 šŸ¤Æ
    5
  1428. 10000% šŸ˜…
    5
  1429. The cams and crank have to be ā€œtimedā€ meaning that when the crank is in a certain position, both cams have to be in the a certain specific position. Yes timing can be achieved without the marks on the belt. However, the addition of the belt markings ensures that the installation is correct.
    5
  1430. That was my assumption
    5
  1431. No effect on meā€¦try harder šŸ¤£
    5
  1432. Ā @krakenwoodfloorservicemcma5975Ā  Right! I canā€™t stand collecting money from people. I know what Iā€™m worth but when Iā€™m going to take food off someoneā€™s table I just canā€™t
    5
  1433. They also have to have the battery backup like a Tesla wall. Solar panels are like chargers but the power needs to be stored somewhere.
    5
  1434. Better not be
    5
  1435. Win some loose some
    5
  1436. Easy witrh the barleys...its not even listed yet LOL and im not going to fix thois typo eather
    5
  1437. Customer wanted to keep the car šŸ¤·ā€ā™‚ļø NO SALE
    5
  1438. Try using Russian accent voice
    5
  1439. Iā€™ve heard about that and thereā€™s some truth to it. It all depends on the scoring or damage that occurs at the camshaft journals. (These engines suffer from oiling problems at the top end) Many of the rebuilders wonā€™t touch this engine bc of high failure rates. I also wanted to replace the long block assembly but thereā€™s always cost to consider.
    5
  1440. Ā @wirdy1Ā  I understand that sounds counterintuitive. Simplified, imagine a scenario where the coolant flows so quickly through the radiator that it doesnā€™t have time to transfer heat and then hot coolant is pumped right back into the engine
    5
  1441. Ā @forgetfulme1719Ā  The box van is a barter projectā€¦but it runs now. Project jeep is suffering from a no restart when hot symptom, the PT is fine, and the Nissan is already gone šŸ˜‰
    5
  1442. Ā @jeffhein7275Ā  I donā€™t think Todd realizes what just happened. In fact I know he doesnā€™t, I was in the middle of it and I donā€™t realize what happened yet. Itā€™s bad šŸ˜„
    5
  1443. Ā @toddhiggins6318Ā  Todd, look at the news. Weā€™re devastated down here
    5
  1444. New ones are on my front porch
    5
  1445. My guy that's kind of a loaded question. you do understand that 99.995% of engine compartments are absolutely filthy. I would rather hose off all of the dirt than leave coolant drips, hand, arm and fingerprints all over the place. If I came across a fully detailed mint polished and shiny engine compartment I wouldn't touch it with a hose. The fact that I do spray them off is a clear indicator that I do give an F.
    5
  1446. Yea it is. They can get wet. They don't run under water or anything, but a garden hose isn't going to kill it.
    5
  1447. They cant get or keep good techs because they treat us like unintelligent lazy expendable slaves. They promise the world and then slowly chip away at your soul. I'm OMW out the door right now because the BS is getting thick enough to float on. Not to mention the lies and double standards.
    5
  1448. It's really not the new, 7yo. That's about time for things to start breaking
    5
  1449. Ā @3vReanimatedĀ  lol I didnā€™t say that Iā€™d pay much for it. My max is $500 for a neglected and broken car.
    5
  1450. Sometimes it is... The job costs 1.8 hours, (the t stat is behind the intake on the back of the engine), plus a couple gallons of coolant and whatever the parts costs.
    5
  1451. Ā @MonkeyJedi99Ā  I didnā€™t vanish it, never do šŸ¤”
    5
  1452. Iā€™ll be starting a civil war on the subject of filling filters in the next videošŸ¤£
    5
  1453. Ā @Justice-SeekerĀ  I wonā€™t sue himā€¦heā€™s fine šŸ¤£
    5
  1454. lol Mitch has been trolling for months. Heā€™s up to 550+ comments. I let him stay for the entertainment. Keep it up Mitch!
    5
  1455. ā˜ŗļø
    5
  1456. Part 1: Hate doing THIS! šŸ˜¬ 2010 Honda Accord 2.4 https://youtu.be/fg92MpIgpkQ
    5
  1457. Theyā€™re pretty good. Iā€™ve blown up one ridgid 1/2ā€ on the last year or so, and Iā€™ve blown up two of the 1/4ā€ bit drivers in 2 years. It was my own fault they broke bc I ran them super hard. In comparison, I just had my green snap on rebuild for the 3rd time in 5 years. Iā€™d say theyā€™re equals with regards to cost vs longevity and return. looking back I see no reason to have bought a $700 snap on impact. It makes torque but I donā€™t need torque numbers in the 300+ ft/lb range. Plus they all suffer cosmetic break down meaning I would have an ugly expensive tool, vs something like the ridged that can be replaced cheaply
    5
  1458. šŸ¤£šŸ¤£šŸ¤£ says me
    5
  1459. lol incompetence wasted more time than my GoPro did šŸ™ƒ
    5
  1460. WTF does that even mean??
    5
  1461. DONT EVER DO THIS FOR REAL!
    5
  1462. šŸ‘‹
    5
  1463. Bingo!!
    5
  1464. Ā @DonaldWells-wk8dcĀ if you know you know šŸ˜Š
    5
  1465. You're behind enemy lines. Take care be safe out there!
    5
  1466. Thanks Steve. I'll keep it up. I wasn't really sure about these videos at first. I like that people are interested. I appreciate the feedback!
    5
  1467. MISTSKE???....GOTCHA!
    5
  1468. šŸ¦—šŸ¦—šŸ¦—šŸ¦—
    5
  1469. Noooo, but Iā€™d like to
    5
  1470. Yesssss! šŸ¤£
    5
  1471. lol I just had a guy scold me because I ruined the wheels šŸ¤£šŸ¤£šŸ¤£
    5
  1472. šŸ˜‰
    5
  1473. It wasnā€™t, I washed it
    5
  1474. I think itā€™s the only one left! RIP RadioShack!
    5
  1475. Agreed
    5
  1476. Ā @Dave-ty2qpĀ  Reeeeeee!
    5
  1477. I canā€™t tell you bc itā€™s top secret
    5
  1478. Yea I havenā€™t needed any lately šŸ¤·ā€ā™‚ļø
    5
  1479. šŸ‘šŸ‘šŸ‘
    5
  1480. Itā€™s a 2min one to probe new markets šŸ‘šŸ˜†
    5
  1481. Buy once cry once
    5
  1482. Ā @garyparr5431Ā  And to bed clear I'm taking about a 180* bend/pinch
    5
  1483. We must destroy the AI
    5
  1484. Said ā€œwhile drivingā€ But had to ask, twice. Maybe I should start having people text me their complaint. Iā€™ll get a more descriptive response
    4
  1485. It would have allowed vacuum (negative pressure) to start sucking oil into the intake stream and it would start burning engine oilā€¦the ā€œfixā€ would have solved the vacuum leak and then caused bigger problems
    4
  1486. You all got it wrongā€¦. I was first šŸ¤£šŸ¤£šŸ¤£šŸ‘
    4
  1487. You too!
    4
  1488. Ā @ZerokillerOppel1Ā  we he cheated, heā€™s a moderator so he can get here before everyone else
    4
  1489. Ā @FollowingtheCliffNotesĀ  hahaha he ws here last week. Got me on fire extinguishers and the exit sign. He was happy that I already had a new one!
    4
  1490. Exactly, because draining the oil pan totally makes all the oil from the filter drain out as well Edit: šŸ™„
    4
  1491. No sleep for you šŸ¤£šŸ¤£
    4
  1492. I saw that in the footage as well šŸ¤¦ā€ā™‚ļø
    4
  1493. Weā€™ll get there. Iā€™m juggling a lot right now
    4
  1494. Ā @Jason-co9epĀ Most people value libertarian principles over the other parties, but folks wonā€™t move to the common sense center bc they donā€™t want to offer the opposing party and political ground. Thats why the Left is now far left and the Right is now ā€œ90s levelā€ Left
    4
  1495. And a happy new year!!
    4
  1496. I may need to calibrate the actuators with a scan tool later
    4
  1497. šŸ¤£
    4
  1498. No that was some crazy bird freaking out šŸ¤£šŸ¤£
    4
  1499. Shout out to YOU!!! šŸ˜šŸ«”
    4
  1500. Facts!
    4
  1501. Sooon!
    4
  1502. Thanks šŸ‘
    4
  1503. Not yet itā€™s a heavy beast. Iā€™m trying to figure out hire to unload it from the trailer when I haul it home. Might need to rent a skid steer
    4
  1504. Itā€™s your head and your pen
    4
  1505. Absolutely!
    4
  1506. Unlisted Second Channel Video: Hydroplaning Honda! https://youtu.be/DPI_ti3fUJI
    4
  1507. Do Negative terminal first that way if you slip up and contact chassis ground you will not arch the positive terminal straight to ground but if you remove the positive terminal first in your rent touch is metal it will close the circuit and throw sparks at you
    4
  1508. Ā @wwjoshdewĀ  I called them, predatory customers they know how to work the system, and seek weakness in retailers for a free goods and services
    4
  1509. šŸ’„šŸ’„šŸ’„šŸ’„
    4
  1510. Ā @midnightgambler3718Ā  I do what I want šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    4
  1511. Ā @FollowingtheCliffNotesĀ  I gave mine her own credit card onceā€¦ā€¦ā€¦ā€¦ā€¦
    4
  1512. Ā @TriforceOfCourage97Ā  It has to do with the amount of interior space. X amount of cubic feet requires X amount of system capacity and the charger is larger than a Celica. SUVs can take 3-4 lbs of refrigerant
    4
  1513. I saw it waaaaay later šŸ¤¦ā€ā™‚ļø
    4
  1514. Was already recently replaced
    4
  1515. @ I concede, weā€™ll done šŸ«”
    4
  1516. No I didn't
    4
  1517. You're not wrong
    4
  1518. Reading the comments hereā€¦. sooner or later we all have to realize that itā€™s not left vs right, liberal vs conservative, tradition vs progression, itā€™s the People vs the Overlords. The systems is rigged against the people and weā€™re being played as puppets by our corporate masters.
    4
  1519. Every night!
    4
  1520. Iā€™m going move it higher up and weld the brackets on. I donā€™t like how low the filters hang.
    4
  1521. Tomorrow šŸ˜Š
    4
  1522. Iā€™ve been in a courtroom before. When the worst happens documentation is everything!
    4
  1523. lol itā€™s worse than that. I sent a video of the damaged bushings.
    4
  1524. I think it does come out fro the bottom, however, I wanted to leave the subframe in bc we needed to roll the car away for scrap. Didnā€™t want to put things back together. I figured it would work just to treat tear it apart. Thereā€™s absolutely no way it can go in for the top
    4
  1525. Not this time šŸ™ƒ
    4
  1526. It is but they must be used with caution! Especially on aluminum, never stop moving the wheel and donā€™t apply pressure to it. They can cut into the metal and deform the surface. Never use one on a cylinder head sealing surface where it meets the block/cylinder bores.
    4
  1527. I think he was talking about the paint
    4
  1528. 1/2ā€ drive
    4
  1529. The thing is tragedies are usually caused by multiple smaller oversights that all add up at the right place at the right time.
    4
  1530. I believe it was just oil that came through the PCV hose. I didnā€™t show this on the Prius video, the PCV valve was replaced also as it was also full of carbon and was most likely sticking open and flowing too much cankcase air back into the intake. The intake was acting as a catch can and collecting oil.
    4
  1531. I posed it to all channel members first. First time.
    4
  1532. So weird, I changed it at it still went back to the 3
    4
  1533. We have impound vehicles here, must keep the gate closed.
    4
  1534. ā€œDas Autoā€ is German... itā€™s a language in Europe
    4
  1535. Thanks!
    4
  1536. They were taken care of. Not an issue. When you communicate effectively, most folks are understanding.
    4
  1537. It sure does. When the crack pulley what removed, the valve train rotated out of time and it nobody knew it. Then my guy went to crank after and bent the valves.
    4
  1538. About $1300-ish
    4
  1539. You know I thought of that, but he wanted a cheap repair and I ran out of billable 10ths/hr on this job.
    4
  1540. Additives and dye. I think the majority of the variants are propylene glycol based (also used as an artificial sweetener in food I think)
    4
  1541. šŸ˜
    4
  1542. You got it!
    4
  1543. I installed all fasteners...cutscenes
    4
  1544. Couldnā€™t hurt to have a backup plan in case a ramp collapses or sinks into the dirt/asphalt
    4
  1545. Ā @TonicofSonicĀ  read my mind
    4
  1546. šŸ˜‚šŸ˜‚
    4
  1547. I sent it to another shop and price me wholesale so I donā€™t have to mark up a menu priced item
    4
  1548. He called in sic today
    4
  1549. PowerstrokeTechTalk wArod. https://youtube.com/@PowerStrokeTechTalkwARod?si=uYpszWDbBY9kLJnQ Troy called in sic today šŸ¤·ā€ā™‚ļø
    4
  1550. Ā @robhallquist1140Ā  Just a dab of oil on the filter seal is all thatā€™s needed. Itā€™s so the next guy can remove it.
    4
  1551. Thank you for the info!!
    4
  1552. Read the comments, haters gonna hate on nice things.
    4
  1553. At first It did sound like a tire to me. It didnā€™t sound abnormal with the scope either. The noise was very faint. I compared the right side vs left side and did hear a difference. The trouble with faint bearing noises, is that you canā€™t scope them under driving conditions. Often times you have to rely on circumstantial evidence and customer feedback. If we all agree that I particular side is causing the noise, then moving forward is ok. Basically I couldnā€™t prove that the bearing was actually making a noise. But the customer and myself both agreed that that was most likely the cause.
    4
  1554. I canā€™t get away with anything šŸ¤£
    4
  1555. To protect the dust boot
    4
  1556. Itā€™s not done yet, about 1/2 way
    4
  1557. Thanks Mark! I'm over it 100% my wife still has a lingering cough but other than that, she's back to normal.
    4
  1558. Awesome comment! šŸ˜‰
    4
  1559. I plan on building a new cable/harness and Iā€™ll fuse them with inline fuse blocks. Itā€™s going to look good! šŸ˜Š
    4
  1560. Itā€™s not old, I filmed it two hours ago
    4
  1561. ooohh I didn't see that! goin back in!
    4
  1562. Feferall Mogul bearings. All flepro and AC Delco gaskets. I used as many Delco parts as possible.
    4
  1563. šŸ˜‚šŸ˜‚
    4
  1564. Sheā€™s dead
    4
  1565. Yes lego man survived... For now
    4
  1566. Ā @Puggy42069Ā  50/50 Iā€™d say
    4
  1567. Iā€™m working on getting a pressure bleeder that pumps fresh fluid into the master and then sucks it out of the blades. In this one I vacuumed out the master and the bled the calipers till they were clean.
    4
  1568. Ā @flinch622Ā  Regarding the old lathes, Iā€™ll say that just because you can, doesnā€™t mean you should. One pass is garbage. The harmonics alone will wreck the cut. I prefer a scratch cut, after manually cutting off the lip. Then fast passes at .010ā€ and final cut slow cut at .002-3 per side. Assuming there are no grooves in the rotor.
    4
  1569. Dude ur EGT's are a little high on this one. Let's unpack a little...I don't need to do a compression test, oil is being pumped into the cooling system. It can only come in through a broken cooler (Like oil or trans cooler integrated into the radiator, which this vehicle does not have) or through the engine internals like a cracked cylinder head or block, warped head etc. Remember the steam cleaned piston we saw with the borescope? You need water for steam (coolant works). Coolant can come into the chamber through a failed head gasket, or cracked head. If enough coolant gets in, like when its shut down, you get a misfire. If a head gasket blows between cylinders you can have communication between pistons and get a misfire. Go take a look at the Pt1 video in the description or pinned comment. You will find more details on the subject. I also run the coil bolts in the exact same way like six more times.
    4
  1570. Ā @rhinohinoĀ  They canā€™t find that from the outside? So the salt rusts out the interior?
    4
  1571. Ā @Flies2FLLĀ  Nope, I think itā€™s double talk. They say theyā€™re going to protect the race track but in the end big money gets its way (answered)
    4
  1572. Yes I am a time traveler
    4
  1573. Ā @IR-nq4qvĀ  šŸ¤£
    4
  1574. Iā€™ve got skills!
    4
  1575. Itā€™s wasnā€™t super horrible Iā€™ve seen worse. But it doesnā€™t have to be as bad as it is. Owner just didnā€™t care about it
    4
  1576. Pure luck on that one, I think he got loose before he overtook me
    4
  1577. Indeed
    4
  1578. Youā€™re a little off on that one. Iā€™m SC OH, MI KS GA FL HI
    4
  1579. We lost it šŸ˜ž
    4
  1580. šŸ¤£šŸ¤£šŸ¤£šŸ¤£ get ur head out of the gutter
    4
  1581. 808 šŸ’Ŗ
    4
  1582. Those folds even out after the pedal is pumped up and the piston comes back out to make contact with the pads. Itā€™s ok šŸ‘
    4
  1583. Copy that. This one is a MAC, I dunno if itā€™s rebranded or not. I get the blue point if the truck has one šŸ‘
    4
  1584. Better than watching grass grow
    4
  1585. Ā @williampope3531Ā  The machine gets the TC fluid later in the video
    4
  1586. oh yea I reset it
    4
  1587. I used to melt crayons on the back of our stovešŸ¤£ Thanks for bringing me back to that one. I was 8-9. We survived the blizzard of 93ā€™ in Ohio bc of that stove. No power or water for 3 weeks, we were cooking and melting snow on the wood burner.
    4
  1588. Yea but it was sooo smoothā€¦.. and that high speed scene had no audio.
    4
  1589. Close enough lol
    4
  1590. This video is about electrical repair sir, we do have other things to fix.
    4
  1591. Iā€™ll stop sweating after the final test drive šŸ¤£
    4
  1592. project jeep
    4
  1593. Ā @ThePackman627Ā  If you have a shop that you regularly use, just drive it over there. Be upfront with the seller. Tell em "I think we have a deal, but I'd like to have my regular mechanic look it over" or something along those lines. If the seller doesn't agree, move on. If you don't have a regular shop, just call around and ask if they would do a pre purchase inspection for you.
    4
  1594. Yes I did, it was empty. Remember the scene where there was no pressure?
    4
  1595. I worked on diesels a lot at the dealer, my brain is trained that everything is a cooler and not a heater (was hoping nobody worked catch thatšŸ˜‰)
    4
  1596. Ā @Hoaxer51Ā  yes the price does sting at first. But itā€™s been a positive ROI. I use it everyday and Iā€™ve owned it for over 4 yrs. Its much faster than a regular ratchet and easier then a pneumatic tool.
    4
  1597. It's gone forever
    4
  1598. A real car thief will just use a tow truck
    4
  1599. It matters to me
    4
  1600. I know they are. Makes me laugh inside. This Jeep spent 10k on look good parts, and then they wanted cheepo brakesā€¦priorities
    4
  1601. I was worried about the presence of the mustangs šŸ¤£šŸ¤£
    4
  1602. Good morning! šŸ‘‹
    4
  1603. Follow Up Here, not looking good! Low Compression Follow Up! Chrysler Pentastar 3.6 https://youtu.be/ytwquADwHtY
    4
  1604. Been there, done that šŸ˜‚
    4
  1605. Iā€™d say get a Milwaukee ratchet, itā€™s half the price of my snap on targets ratchets and good quality. I like both of mine. The red one is 1/4ā€ Drive Ave the green one is 3/8ā€ drive. I have these instead of the Milwaukee because of the long shank.
    4
  1606. I pulled off some camera trickery, the black disc/screen goes to one of the solenoids, itā€™s in šŸ˜‰
    4
  1607. Itā€™s my stuff, ws headed home
    4
  1608. Ā @goose32373Ā  no sooner kind of error occurred, my pre upload video didnā€™t have this issue
    4
  1609. I blew it out with air also, I figured it was less damaging than a bunch of power steering fluid (itā€™s was a leaking p/s pressure sensor)
    4
  1610. No way! You guys are pure evil! šŸ˜‰ šŸ¤™ all in good fun my friend
    4
  1611. Brilliant ! I know
    4
  1612. The cash isnā€™t really worth the effort anymore. You can roll in with a few thousand pounds and leave with $80-$100. (For steel) Most shops have 3rd party companies collect it so they donā€™t have to drive it to the salvage yard. Iā€™ll make a video of scrap day when we haul it all in.
    4
  1613. Sure it is
    4
  1614. Four days with that kind of attitude šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    4
  1615. Nope Still Friends with Banks šŸ’Æ
    4
  1616. Nawwww,
    4
  1617. Ā @davidcraven277Ā  Youā€™re right 100%. I could bash Dorman, Fiat, Diesel Logic or the local bakery and it gives them grounds to file suit. The trouble is when appealing to the law EVERYONE will lose because lawyers will run 350-550/hr and the hours add up when they bill .2hr for a phone call or email. Believe me I pissed DL off pretty bad on this one and rightfully so, that doesnā€™t make them right or wrong nor does that make me right or wrong. Disagreements are good and opposition is good! Criticism also invites opportunity for improvement, thatā€™s what weā€™re all working towards. In the end this will be a win for everyone I think.
    4
  1618. But I wasnā€™t self promoting anything šŸ¤” Not sure what you mean
    4
  1619. Well they called me aver my remarks. Like I said we had a good conversation about the matter. They acknowledged my comments and concerns. Iā€™m in the business of making friends not enemies.
    4
  1620. No
    4
  1621. I redid the link. Thanks for letting me know! Here it is! https://youtu.be/YRyKzFVGxu8
    4
  1622. Yea tire right
    4
  1623. A pulley broke/came off. The Repair guys were working up on a ladder and there wasnā€™t much of a show. I was disappointed too
    4
  1624. It was close Iā€™m sure
    4
  1625. Need material for the extractors to grip, this bolt was pretty bad
    4
  1626. LMAO šŸ¤£
    4
  1627. Itā€™s a D Max, theyā€™re like that. The 6.7 fords come out easy too.
    4
  1628. Skill level for hard stuff, whoever is available for waiters, or easy work like brakes or something
    4
  1629. bodyshop knows
    4
  1630. Ā @MrKoko0507Ā  Weā€™re working to the ins and outs of International commerce/shipping
    4
  1631. Yea that's why I keep doing it. šŸ˜ They told me to stop because it could cause a lawsuit and some other assorted BS. Free men don't ask permission. I'm on my way out of the door at this place anyway. They tell me that the schedule is changed and that I have to Saturdays too. A six day week isn't going to happen. As far a jobs go, I already got a NEEEW one!
    4
  1632. Negative, the holes were a smaller size than the alignment hole
    4
  1633. Click
    4
  1634. šŸ¤£šŸ¤£ I stay in my own reality!!
    4
  1635. Helloooo
    4
  1636. I did more than that
    4
  1637. Sure does. GM is picking up the tab on this one!
    4
  1638. Here's the best part. GM had a super high failure rate during with these lifters back when they only had four cylinder cancellation. The new generation LT v8s now have 8 cylinder cancellation. So there are twice as many lifters to fail. Good job on the redesign huh?
    4
  1639. Well not really, technicians add service departments didn't design it. Truth be told, it's done to meet emissions requirements. This is forced engineering mandated by legislation. Yay big government! On top of it all, it's all made in chiiNA, one of the largest polluters on the planet... See the irony?
    4
  1640. I like your English to English translations šŸ¤£
    4
  1641. Diagnosis complete!
    4
  1642. I swear itā€™s a Psy op
    4
  1643. I have a one time only tool myself. Special tool needed to disconnect a brake pedal from the booster rod on a VW something or other.
    4
  1644. Never go full Florida Man!
    4
  1645. Done at 5:55! I got it! šŸ˜Ž
    4
  1646. I appoint you as my voice of doom
    4
  1647. Ā @Strokin383Ā  oohh I plan on it. Gotta be sneaky... You'll see.
    4
  1648. Not serviceable
    4
  1649. Well we know who likes to seal things nowā€¦ their socialist mindset is showing a little šŸ¤£šŸ¤£šŸ¤£
    4
  1650. Ā @Phil-SandsĀ  šŸ‘†šŸ‘† belief in Towel is strong with this one
    4
  1651. Not exactly. Folks wonā€™t watch a 2 hours video. Itā€™ll kill the channel
    4
  1652. Depends, if I can get them with pliers I just do that. If not I use the tie rod tool
    4
  1653. Yup, itā€™s not working, it gets worse too, Iā€™ll made a video later about what happened
    4
  1654. šŸ¤£šŸ¤£
    4
  1655. Nobody understands!
    4
  1656. Ā @bpdp379Ā  Valve cover gasket leaking engine oil and a Evap system leak. Not much to tell. I cut it out of this one. I may make a follow up with those items of repairs are approved.
    4
  1657. I dunno yet. Theyā€™re considering it but need a few days.
    4
  1658. I recommend buy things that you will use every day and that will make you money. Buy fancy stuff bc you want it and can afford it, NOT bc you think you need it. A $100 impact gun does the same things as a $1000 impact gun. Buy utility items that will give a good return on investment.
    4
  1659. Going to be šŸ”„šŸ”„šŸ”„šŸ”„!
    4
  1660. howdy!
    4
  1661. I canā€™t say that Iā€™ve had a good experience with Detroit Axle
    4
  1662. Itā€™s ok my dude Iā€™m an excellent multitasker šŸ‘
    4
  1663. Ā @stans5270Ā  šŸ‘†stan gets a ā¤ā€šŸ©¹
    4
  1664. Get em!!!!!
    4
  1665. šŸ˜‚šŸ˜‚
    4
  1666. Aahhhh Iā€™m just some guy in the grand scheme of things
    4
  1667. Itā€™s pretty funny
    4
  1668. lol he didā€¦But I didnā€™t have it with me for this one
    4
  1669. Thx Tim!
    4
  1670. Yea I got ā€˜em all
    4
  1671. Thatā€™s exactly how they work. Oil is pumped into them from the oil hole inside the crankshaft. The oil separates the crank journal from the rod bearing, creating a gap between the metal parts.
    4
  1672. Itā€™s been 5 months and now I find this comment
    4
  1673. Never do
    4
  1674. Get the Pedal Monster next, you will love it with with the iDash
    4
  1675. Ā @golf25radiomanĀ  @wifeunit is next. If youā€™re caught up on that one just have to wait šŸ¤·ā€ā™‚ļø
    4
  1676. No worries Dave. Welcome back youā€™ve missed a lot.
    4
  1677. RainmanRaysRepairs.com
    4
  1678. No deal at, the conversion went like this ā€œI welded my needle nose pliersā€¦can I have a new set?ā€ Snap on man ā€œSure but I donā€™t have them in green, would you like me to order one? Or is Red ok? I also have a pair in yellowā€ Me ā€œoh no you donā€™t, youā€™re not getting me start a new color, then I have to buy 10 more things in yellowā€ Snap on man ā€œExactlyā€ Me ā€œyou already did that with the green, red is fine, thanksā€
    4
  1679. I totally wouldnā€™t advise removing a firing coil. I like living on the edge and pushing boundaries šŸ˜‰ (Just a little)
    4
  1680. I have a grease trap drain by the hose
    4
  1681. Fiber optic internet and a generator
    4
  1682. Thatā€™s the one I just killed, ws a great gun
    4
  1683. šŸ¤£
    4
  1684. Negative bc the compensation procedure (when the car rolls back and then foreword again) accounts for the heads not being straight or runout in the wheel. Loose parts canā€™t be compensated for
    4
  1685. You have absolutely no clue what youā€™re talking about.
    4
  1686. Ā @SIGINT007Ā  Itā€™s more of a trade off than a rip offšŸ¤£ Eric says Doo de doo when his phone e rings
    4
  1687. And that was just a coincidence! šŸ¤£
    4
  1688. Weā€™re waiting for the engine. Eric was slammed pretty hard with hail this week so heā€™s slightly delayed
    4
  1689. Waiting on parts
    4
  1690. This one is for Sunday when I'm off work so I can join the live chat!
    4
  1691. @Average User yea seriously šŸ˜
    4
  1692. You can get just as much of a scanner and probably better for less money than a snap on. I have a snap on bc I wanted it and got a good deal. (not bc of YT) To answer your question, I cant fairly rank them or give you a legit opinion. My D8 is bidirectional meaning it can send information to the car, like commanding features on or off. It reads live data including airbag, bcm, abs and hvac data. It graphs and has online features also. The solus is a more basic version i think, I've owned one but it was years ago, I think they have a colored screen now. I haven't used a modis, and the Zeus is the Ferrari of the Snap on scanners. The snap on updates are around $1000-1200 per year including online access to their network. It has recalls, bulletins common fixes ect. (its a pay to play situation) If you're scanner shopping, get one that works for you, meaning one that matches skill. A $6000 scanner doesn't make you better at your job. If you're just starting out, get an Autel, if you have a few years experience, get an expansive Autel. What I'm really saying, is stay out of tool truck DEBT.
    4
  1693. šŸ¤£šŸ¤£šŸ˜‚šŸ¤£
    4
  1694. Nope just $25 (0.3hr@$85)
    4
  1695. Omg you have a Neon thatā€™s still alivešŸ˜³ Dude send it down, Iā€™ll put a clutch in it!
    4
  1696. Bc we love our country! šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø Even if our politics are screwed up
    4
  1697. Check out the description, thereā€™s two more videos in the links
    4
  1698. I have good ratchets šŸ¤£
    4
  1699. I make series videos available early through links. Folks who finish the first one dude the link to the next ones. Then later, I post them live due excessive l everyone to discover. So if it saw it already, thatā€™s was the early release
    4
  1700. No can do, the slab is too thin
    4
  1701. They get wiped down if prints make it the paint šŸ™ƒ
    4
  1702. Ryan Hall as well
    4
  1703. Caught me slacking
    4
  1704. I went back and looked, the PiP was the strut from the other side. Gotcha , and didnā€™t even mean to
    4
  1705. Maybe we should be taking a closer look at governmentā€¦perhaps theyā€™re the ones pulling on our strings! I think youā€™re both right
    4
  1706. Try turning the notification šŸ””bell off and then on again
    4
  1707. Negative, the sway bar or roll bar is located at the bottom of the axle in this instance
    4
  1708. Weā€™re all beautiful people my friend šŸ«‚
    4
  1709. Nooooo
    4
  1710. Could have been junk yard parts, or they waited a king time to get it aligned
    4
  1711. It was flawless šŸ™‚
    4
  1712. I didnā€™t think they were that tight šŸ¤·ā€ā™‚ļø
    4
  1713. I did NOT expect that thing to come at me like that
    4
  1714. Itā€™s seasonal, plum Iā€™m building my own customer base. And I donā€™t have anywhere near the drama that came with a retail store job. I suppose thereā€™s pros and cons to the current situation. Thx for the input, Iā€™ll use it to improve the situation at hand
    4
  1715. See you tomorrow
    4
  1716. Itā€™s bc the camera was flipped. I actually followed procedure
    4
  1717. šŸ˜”šŸ˜”šŸ˜”šŸ˜”
    4
  1718. Bradenton / Srq
    4
  1719. Yes
    4
  1720. I never said thatā€¦. Few more days, just wait
    4
  1721. I content tell you. My smell is all screwed up from the VID. Very frustrating
    4
  1722. šŸ˜‰
    4
  1723. Ā @FallenBonsaiĀ  šŸ¤£šŸ¤£šŸ‘
    4
  1724. Iā€™ll have to up my game a bit for the next one šŸ˜ˆ
    4
  1725. Duckjob.wav windows 3.1/AOL (If you knowā€¦you know)
    4
  1726. Ā @scanningnycĀ  I donā€™t think I do.
    4
  1727. This clip type connectors are poor for long term use in my opinion. They let water in abs they corrode quickly. I feel that the connection they make is loose and unreliable. These is just my option and Iā€™m sure others have made good use of them. But I just canā€™t get behind those things
    4
  1728. Itā€™s a landscape truck, they get a pass
    4
  1729. TY!
    4
  1730. I bought the pulley. Shouldnā€™t have tried a short cut and just ran the tap in the holes to begin with.
    4
  1731. THEREā€¦I changed it šŸ‘šŸ‘šŸ‘šŸ¤£
    4
  1732. Pt 2 Follow up. New PCM Car Misdiagnosed by Mechanic! Wasted Spark Ignition System! https://youtu.be/yUP5QzJfEwk
    4
  1733. Pt 2 Follow up. New PCM Car Misdiagnosed by Mechanic! Wasted Spark Ignition System! https://youtu.be/yUP5QzJfEwk
    4
  1734. I dunno, you guys wonā€™t stop calling if I do šŸ˜¬šŸ¤£šŸ¤£
    4
  1735. This is the way
    4
  1736. That exactly what would have happened if my name was on the building šŸ’Æ
    4
  1737. Overfilled oil will foam up. If itā€™s under filled, as long as the filter, pump, passages etc are still full, the engine wonā€™t suffer damage due to lack of lubrication because with enough is circulating to do its job. If itā€™s foamy, it canā€™t lubricate
    4
  1738. As long itā€™s was correct it wonā€™t be much of a problem. Overfilled oil will foam up and loose itā€™s ability to lubricate
    4
  1739. You were first twice. You win! I didn't plan on a prize but I have this link! https://youtu.be/mrTIxB9WoCo
    4
  1740. Wired it up this morning
    4
  1741. Now that I think about it, that's a fantastic idea. I have not done a purge on this box in three or four years.
    4
  1742. Easy JobšŸ¤·ā€ā™‚ļø
    4
  1743. You have just watched part 1, Click HERE for part 2! https://youtu.be/dnVqOuhVykE
    4
  1744. šŸ’ŖšŸ’ŖšŸ’Ŗ
    4
  1745. FR too bad they wont email me back šŸ˜”
    4
  1746. šŸ¤£šŸ¤£
    4
  1747. If I canā€™t figure it out I will
    4
  1748. Ā @toddhiggins6318Ā  people died hereā€¦ this isnā€™t a joke
    4
  1749. I just let it dry before putting the cover on. No worries
    4
  1750. Ā @bradkayĀ Thing is, we never assume where itā€™s going, they have a habit of making right hand turns before schedule. Always prep for the ā€œitā€™s coming right for usā€ scenario
    4
  1751. Definitely. It's not like weather pack connectors aren't used on everything. šŸ‘šŸ‘Œ šŸ¤£šŸ¤£šŸ˜œ
    4
  1752. We got whole bunch a boats...12 Jennys
    4
  1753. I would LOVE to have a cross training day with some engineers. A program like that could change the world.
    4
  1754. For years!!!!! Shout out to my hero AvE!!
    4
  1755. Indeed. I agree. It's time for an upgrade! 10k was my threshold to invest in equipment. The GoPro, and a new laptop are on the list. Lol my phone is almost 4yrs old, that's getting upgraded to. Gonna start doing multi angle shots. šŸ‘
    4
  1756. Ā @youcanbesmartaskhow3857Ā  šŸ¤£šŸ¤£
    4
  1757. They can still flow but itā€™s very little. There is a tiny hole in them allow some flow but not enough for cooling
    4
  1758. So did I. Things went south very very quickly. Thatā€™s all I have to say about that
    4
  1759. Thanks Richard!
    4
  1760. We are few, but proud šŸ¤£
    4
  1761. Ā @SpencerDT6Ā  I just figured that out lol. So difficult to detect sarcasm through txt
    4
  1762. Thanks @Mike ! I guess you missed the part about the gloves that was later in the video
    4
  1763. @orion 77 is my biggest fanā€¦ I bet this is Scotty Kilmer with a second account. šŸ¤£šŸ¤£
    4
  1764. It was Sunday, weā€™re closed so Dave was off
    4
  1765. A big old mess šŸ¤£šŸ¤£šŸ¤£ Heavy line work is no joke
    4
  1766. I would NOT service Metro State.
    4
  1767. Ā @ilovebutterstuffĀ  šŸ˜‚ all you can do is RUN away
    4
  1768. Eric O be likeā€¦..šŸ‘€
    4
  1769. Anything contacting the compressor wheel that's spinning at high speed can damage the fins
    4
  1770. Theyā€™re called Sandhill Cranes
    4
  1771. Yea sheā€™s a little dirty
    4
  1772. You canā€™t hear a PT, they arrive in tow trucks šŸ¤£šŸ¤£šŸ¤£
    4
  1773. Ā @ecabral784Ā  Nobody was shamed here. The reality of the situation is that this vehicle is a liability and a danger to the operator and everyone else around it.
    4
  1774. The lab tests indicated that Kirkland Oil outperformed Mobil 1 and Amalie in almost every metric. And is not cheap either
    4
  1775. Yeah bro This one was pretty gross
    4
  1776. Maybe tomorrow! šŸ˜
    4
  1777. Weā€™re good! Still getting loads of rain after the hurricane šŸ˜¬
    4
  1778. You won
    4
  1779. You can if youā€™re close to Mi or Fl
    4
  1780. Usually they do. But the suppliers tried to charge us $39 box this week. So the order was sent back
    4
  1781. See theyā€™re not as horrible as people say. šŸ‘
    4
  1782. Iā€™ll be ok
    4
  1783. This is the way
    4
  1784. Ohhh yea. More like 5x more
    4
  1785. Well yea
    4
  1786. I do
    4
  1787. Ā @bobbg9041Ā  I can say ā€œohmā€ and put a meter on it, knowing that impedance is the issue. I canā€™t measure impedance, but resistance still told us that the arrangement was sufficient. Personally I would have just bought a two channel amp. Everyone big mad in here today šŸ¤£
    4
  1788. Pending approvalā€¦
    4
  1789. Fan was free spinning, meaning itā€™s not pulling enough air bc the clutch slips. Causes AC head pressure to run high because of reduced airflow over the cooling package thus inefficient performance
    4
  1790. Youā€™re a comment
    4
  1791. You win! šŸ¤£šŸ¤£šŸ™Œ
    4
  1792. Theyā€™re cheap and failure prone. They belong in lawnmowers and thatā€™s being nice.
    4
  1793. We're ALL FIRST hahahaha
    4
  1794. I felt that was better than ignoring completely.
    4
  1795. Come on down bro. We have jobs, freedom and a thriving economy.
    4
  1796. Ā @onlytruth4236Ā  Awwww bless your heart. I see what you're doing. You're trying some form of liberal pseudo intellectual form off gaslit passive aggressive insults. Keep it up, you might actually upset someone of you try hard enough. Remember, persistence is key to success. Good luck!
    4
  1797. Ā Mark RuizĀ  Your a idiot. Go back to high school civics. There is a HUGE difference.
    4
  1798. Ā @shadythereokĀ  And trolling the comments section is not a skill.
    4
  1799. You got me!
    4
  1800. Ā @youknowwho4862Ā Not my shop. Book time is book time and the customers make the decisions based on diagnostic facts. We don't have sales people, we have advisors. Because of that, we have more work than we know what to do with. ALWAYS beware of a slow repair shop.
    4
  1801. šŸ¤£
    4
  1802. 3 of em
    4
  1803. I didnā€™t want to lay it on too thick. I wasnā€™t being negative but I thought it started to sound like it āœŒļø
    4
  1804. šŸ‘‹
    4
  1805. Ā @DakalaShadeĀ  I like your logic why regards to a mechanical fuse. I think that's exactly what I'll do when this 12 burns up again. For the money I spent on the 2s setup and replacement motors, I should could have bought a brushless to begin with. I knew better.
    4
  1806. Yea everything is stock and I bought it new. The gearing is stock also. After it roasted the second motor I replaced the speed controller and it smoked another 12t. I just installed one last motor which is the Arrma OE 12t (the other replacements we different manufactures) If it does it again I'm just going to convert it to brushless.
    4
  1807. I bought a new motocraft not a reman
    4
  1808. Never said that, I commit to my decisions, that doesnā€™t mean the customer pays for it.
    4
  1809. None of my samples have been analyzed yet. šŸ¤·ā€ā™‚ļø
    4
  1810. The guy came and drove away
    4
  1811. šŸ˜
    4
  1812. Canā€™t do that, the ā€œ@Insertnamehereā€ feature is coming
    4
  1813. No. This car was a rehab project car and I surprised him
    4
  1814. When I put the cam sensor in and the gear didnā€™t catch. Love my job so much, I do it twice šŸ˜…
    4
  1815. šŸ‘
    4
  1816. Yes
    4
  1817. I donā€™t want to be the one to fix this mess. Theyā€™ll probably kill me if I try
    4
  1818. Awesome! Yea itā€™s not bad for the cost. Itā€™s no Snap on Zeus by any means but itā€™s a good code reader and and has a decent amount of data features. I hope it serves you well and thanks for the feedback
    4
  1819. Ā @U.S.A.1791Ā  I have made a new one
    4
  1820. Itā€™s interesting how IT and techs have a similar vernacular
    4
  1821. šŸ™ƒšŸ¤£
    4
  1822. The pins are super small and Iā€™d rather not probe it. Plus by using a resistor I tested the entire circuit just just the suspected component
    4
  1823. I tried, customer didnā€™t want them. šŸ¤·ā€ā™‚ļø
    4
  1824. I believe that I do, but it may be lost in the drawer of unknowns and random obscure items
    4
  1825. I beg to differ. Agreed, they are fantastic salesmen. But there IS a difference in quality! I have tools from Snap On, MAC, Matco, and even old school Craftsman. My snap on stuff is far superior IMO
    4
  1826. As soon as I can get that phone ringer do de dooo
    4
  1827. It must have been an optical illusion, those were the same size šŸ’Æ
    4
  1828. Iā€™m coming around! šŸ‘
    4
  1829. Not reallyā€¦I know itā€™s common practice with many people. I donā€™t use it on threaded fasteners. Lubrication decreases friction when applying torque, causing an over torque and excessive clamping force. The majority of automotive fasteners do not factor in any type of lube. Fun fact: I understand that most fasteners in aviation require a lubricant to achieve the proper clamping force.
    4
  1830. Closeā€¦ itā€™s a CAT
    4
  1831. OMG no! It would ride better if itā€™s were supported by 2x4s
    4
  1832. See pinned comment
    4
  1833. Lol it didnā€™t start out that way. The headlight video was made first. But you see what I did therešŸ‘šŸ¤£
    4
  1834. Yup thatā€™s the interwebsā€¦
    4
  1835. I just in installed a Denso this morning, itā€™s running perfectly now
    4
  1836. Inspected by the lift guys 6-8mo ago when the 3rd unit was installed (with a new cable)
    4
  1837. šŸ«”
    4
  1838. šŸ‘‹
    4
  1839. We spend our money on boats
    4
  1840. Ā @garynewell6947Ā  Gary...have fun
    4
  1841. Meanwhile: Ray on Robinhood buying more brake clean futures šŸ¤£šŸ¤£šŸ¤£
    4
  1842. Theyā€™re going out today
    4
  1843. We ship fast
    4
  1844. šŸ¤£
    4
  1845. Yea edit updates are taking sweet time
    4
  1846. Prolly because I made a whole new video from the back half of another video :)
    4
  1847. You canā€™t say that, the potato said he didnā€™t do anything wrong. To disageee with the potato could get you investigated by those who are feeding the potato
    4
  1848. Sry, I donā€™t choose the parts we use. No comment in the o rings, it will start another YouTube civil war
    3
  1849. The new ones had new seals
    3
  1850. Iā€™m going find them when I go to SEMA next week
    3
  1851. Hahahahah Bob Jr! Yessss! Hope Benden is cool with it šŸ¤£
    3
  1852. Ā @45AMTĀ  the messed up part, is that I edited it twice šŸ¤£
    3
  1853. The caliper came loose at some point and hit the inside of the wheel
    3
  1854. I believe it then becomes a potential fastener
    3
  1855. Do it for the Reeeeeeeee! šŸ˜
    3
  1856. 25 thousand psi at the rails
    3
  1857. Iā€™m not interested in a new truck, so I can build this one
    3
  1858. Back to Last Video: Low Compression Misfire! Dead Cylinder | Will it Run? https://youtu.be/N1RjnwVSbg8
    3
  1859. It totally epic šŸ˜‰
    3
  1860. Itā€™s not that hard, Iā€™m not hiding. Except from one guy whoā€™s a little ā€˜out of touchā€™
    3
  1861. It has a non serviceable fitting it stayed
    3
  1862. Weā€™re good, you can go back to the office now šŸ¤£šŸ¤£šŸ¤£
    3
  1863. You win
    3
  1864. Ohhh no I never pay retail. I always buy boxes used. Never had a new one. I think I have 6-7k in my boxes total
    3
  1865. I was thinking the same thing, itā€™s about 2yrs old now
    3
  1866. I have like 6 of them and theyā€™re all full šŸ˜œ
    3
  1867. šŸ¤«
    3
  1868. I get free hats šŸ¤·ā€ā™‚ļø
    3
  1869. SERIOUSLY it wasnā€™t good for filming. šŸ˜
    3
  1870. Iā€™ve decided to become the change I want to see šŸ˜‰ My hope is that someone else will do the same. Paying it forward is highly contagious!
    3
  1871. šŸ¤£šŸ¤£šŸ¤£ Right!!!
    3
  1872. Itā€™s anodized aluminum
    3
  1873. Ohhh I did edit!
    3
  1874. Youā€™re like my best troll ever šŸ¤£šŸ¤£
    3
  1875. Edits my guyā€¦edits. I use actual clicks in video at my discretion
    3
  1876. 150k, it out of power train warranty
    3
  1877. Still waiting on some parts. No engine yet.
    3
  1878. Heā€™s emotional
    3
  1879. lol itā€™s usually just one to hammer my point home
    3
  1880. I buy my gloves and towels. The shop parts for parts cleaner.
    3
  1881. I was kinda making reference to the word on a conceptual level, not so much political, as Iā€™m quite conservative in practice and concept. I did recognize that it would probably make its way into the political realm quickly, but I decided to leave the scene in to spark conversation. I hope it stays civil. We need middle ground conversations more than ever, and I think the divide must be crossed, from BOTH sides! And I do believe that folks on the extreme end of the political spectrum are seriously damaging our country. I paid $3 for a green pepper yesterday, thatā€™s a problem
    3
  1882. Iā€™m sure itā€™s junk, it didnā€™t end up in a closet for no reason
    3
  1883. I can copeā€¦spend a year in Detroit once
    3
  1884. Livin on the edge
    3
  1885. Do you know how long that would take?
    3
  1886. And that is why I have the 25ft 1AWG jumper cables! Jump boxes arenā€™t what they used to be.
    3
  1887. Me too! Had a hard time getting this one uploaded.
    3
  1888. Never!
    3
  1889. I need to go check that right now!
    3
  1890. That bothers me too
    3
  1891. Ā @FollowingtheCliffNotesĀ  and you get a ā¤ļø
    3
  1892. Ā @FollowingtheCliffNotesĀ  you know the rules šŸ˜
    3
  1893. Two sets
    3
  1894. Iā€™ve never been clinically diagnosed.šŸ˜‚ I think Iā€™m just very particular about certain little things. I think little details can go a long way
    3
  1895. Donā€™t be discouraged, theyā€™re great cars
    3
  1896. It was all the way down. I did spot welds bc the tube was too thin to run a solid bead. It would have continued to burn away if I tried to fill the hole in one go.
    3
  1897. šŸšØšŸšØšŸšØLong Version is Welding and GrindingšŸšØšŸšØšŸšØšŸšØhttps://youtu.be/tIIqRlfVDPo
    3
  1898. Life is all about the little pleasures
    3
  1899. I said ā€œclickā€œ
    3
  1900. I think the grease is circumstantial. We donā€™t use it much down here in the south. But if I were in the rust belt I probably would. The brakes do not come with grease from the factory so many conclude that it shouldnā€™t be there. But in a rust belt state, you have to lube the area to the parts donā€™t rust jack and seize in place.
    3
  1901. Yeaā€¦ it says preview šŸ¤£
    3
  1902. Iā€™m Learning to market šŸ˜
    3
  1903. They good šŸ‘
    3
  1904. Needs a better chandelieršŸ¤£šŸ¤£šŸ¤£
    3
  1905. Doesnā€™t matter, itā€™s in the past
    3
  1906. Donā€™t know woke up yesterday and had some slight pain in the joint I think I strained it or sprained it itā€™s not terrible but I am taking it easy
    3
  1907. I am actually a figment of your imagination
    3
  1908. I did!
    3
  1909. Hahahaha
    3
  1910. You must have missed the part about the plastic screws being junk and push pins fitting better. I don't think that's sloppy considering that I pulled broken pins out and replaced them with functioning pins. Just sayin'
    3
  1911. Only in CA where water is illegal LOL
    3
  1912. Thatā€™s not true at all
    3
  1913. šŸ«”
    3
  1914. Iā€™m confused by that bc it says 10a AND 15a on the cover. I pulled a 10 out. Iā€™m hesitant to up it to a 15. Best to replace the TIPM at this point
    3
  1915. Yes I did. I have it TY!! Havenā€™t used it in camera yet!! But I have in in the meter drawer
    3
  1916. Ā @CasmigeĀ  Well I cant overdo it
    3
  1917. Because itā€™s not number 2
    3
  1918. Itā€™s a replica on a 77 vette chassis
    3
  1919. Yea!!
    3
  1920. How many does one need to have it classify as an arsenal? Asking for a friend
    3
  1921. Thank you. Itā€™s quite moving to have someone youā€™ve never met, say such kind words! Iā€™m touched. šŸ„²
    3
  1922. Donā€™t sit so close to the TV
    3
  1923. Ā @terryharvey4811Ā  Absolutely! Car was towed it and barely ran.
    3
  1924. You mean the guy that prevented the looters from cleaning out Charlotte county and rebuilt the bridges in a week? I thought that was at good thing. Sanabel island even has power now. Good team effort! A+ for Florida and everyone else who came to help
    3
  1925. Much much better in every possible way
    3
  1926. Theyā€™re fantastic and do exactly what I need them to do!
    3
  1927. Theyā€™re greatā€¦ descent ride unloaded and stiff enough to keep the front end from bouncing with a trailer
    3
  1928. Perks of the job šŸ˜‰
    3
  1929. Ā @frankvetere4423Ā  I tryā€¦thereā€™s loads of comments! šŸ˜ŽāœŒļø
    3
  1930. SAE fasteners are getting rare these days in automotive applications. I rarely use standard tools anymore.
    3
  1931. Enough to make me want to do oil changes šŸ¤£šŸ¤£
    3
  1932. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    3
  1933. Ā @AmirHS86Ā  Lol THAT mustang. We had the raw footage enhanced to try and pull the tag with no results. There were a few folks in town who thought they knew the guy and a couple very likely suspects with history for aggressive driving. But with no tag number, nothing sticks
    3
  1934. Waiting on parts, lots of em
    3
  1935. All good! No Exxon Valdez herr
    3
  1936. Yes it has some dry coolant due to a leak. The cooling system ws repaired before I got here. It was loaded with heavy rust water and the freeze plug area probably had engine block rust behind the visible section. It was dealt with with lots of flushes new coolant and some block sealer for the leak. I didnā€™t want to risk replacing it bc I could have been made worse even with a new plug.
    3
  1937. I made it
    3
  1938. First
    3
  1939. I ws 40 miles away
    3
  1940. šŸ˜
    3
  1941. Sure am!!
    3
  1942. The ECM, then the ecm controls the fuel injectors.
    3
  1943. Itā€™s not a good idea to randomly approach people that are in high stress situations.
    3
  1944. Housing is leaking coolant
    3
  1945. Never touched it šŸ¤£šŸ¤£šŸ¤£
    3
  1946. šŸ‘€
    3
  1947. šŸ¤£šŸ¤£
    3
  1948. Ā @antonyfrost2541Ā  šŸ¤£šŸ¤£
    3
  1949. Lol no theyā€™re all gone. šŸ¤£šŸ¤£šŸ˜ I actually found this thing on eBay
    3
  1950. eBay all day! šŸ˜‰
    3
  1951. Lol I know of the Porsch-E and Fokksvaghen is one of my favorites to pronounce correctly šŸ˜
    3
  1952. I say nippex as well, but according to the Germans itā€™s kuh nip ex
    3
  1953. I saw an immediate slow down this week. Could be a fluke could be economic adjustmentsā€¦time will tell
    3
  1954. Ā @Flies2FLLĀ  we all know the type of folks that like to suppress opinions and free speech šŸ˜‰šŸ‡ŗšŸ‡øšŸ’Ŗ
    3
  1955. I know I know, I think about it every day....ya know it takes me forever to do things ;)
    3
  1956. Good timing! WIN!
    3
  1957. Sweet!
    3
  1958. Me too, I donā€™t like it. Itā€™s getting moved again.
    3
  1959. and thank you too!
    3
  1960. Ā @johnhnetkovsky8917Ā  I pull the intake šŸ˜Ž
    3
  1961. It can be an excellent source of information and thereā€™s a lot of it out there,But at the end of the day you still have to verify what the problem is.
    3
  1962. Wordsā€¦..šŸ˜Æ
    3
  1963. Itā€™s no different than driving with a scantool or laptop (both of which happen regularly) Customers are fine they trust me no to wreck their cars šŸ¤£
    3
  1964. Good luck šŸ¤£
    3
  1965. Dexcool is ok but itā€™s not a 100,000 mile fluid. It becomes acidic and begins to break things down. It can be used without issue but it need to be changed every 50k
    3
  1966. Nasty wasnā€™t it? The series is getting to that pointā€¦
    3
  1967. I did that after, but the intake came off to reseal an internal leak
    3
  1968. I like loading up on blue silicone on both sides of a gasket! šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    3
  1969. Ā @flymoracerĀ  Itā€™s both, basically the tube has more flow potential than the hole in the fender, that combined with the lower pressure in the air box and the ram air effect from the scoop we ultimately get a lower temperature intake charge bc the fender air will still be hotter than the outside air. Nobody is claiming 50hp here, itā€™s the little things that add up.
    3
  1970. Ā @flymoracerĀ  I have measured it with an air temp probe using the iDash, it does in fact have temp difference
    3
  1971. 3.5 hr
    3
  1972. I'm always reading....šŸ‘€šŸ‘€šŸ‘€
    3
  1973. Because itā€™s nice n shiny
    3
  1974. 3.5
    3
  1975. Iā€™ve agreed with my company not to disclose prices or hours. But it was over 10
    3
  1976. They don't mind a bit. It's good documentation in case something goes sideways.
    3
  1977. probably
    3
  1978. I needed it
    3
  1979. Lol I know the feeling about letting other people touch my vehicle.
    3
  1980. My guy, this job has no sloppy in it. What do you mean? Thereā€™s no leftover shells in the engine, everything is clean and nothing is damaged. Where did I go wrong here?
    3
  1981. Sux that youā€™re in that position. However props to you for recognizing the problems. Use that to grow!
    3
  1982. And you were šŸ’Æ % first! šŸ¤£šŸ‘šŸ‘šŸ’Ŗ
    3
  1983. Cut bait and chum blocks šŸ¤£šŸ¤£šŸ¤£
    3
  1984. I canā€™t find the phone system that has the same ringer. I guess the ringtones are built into the headsets.
    3
  1985. Perhaps, but I already have gas generators, but I want 120v AC in the truck also. It serves multiple purposes for me. With fuel capacity at 120gal of diesel I donā€™t have to lug Jerry cans around.
    3
  1986. It was either this is a #shorts
    3
  1987. Vroom!!!
    3
  1988. šŸ¤Æ
    3
  1989. Gotcha at the end šŸ˜‰
    3
  1990. Thatā€™s like putting a snap on badge on a harbor freight toolbox, I canā€™t commit such a violation šŸ¤£šŸ¤£
    3
  1991. Indeedā€¦ they just didnā€™t age well
    3
  1992. Gotcha! Wait to the end
    3
  1993. I donā€™t even like battery jobs.
    3
  1994. Yea that actually happened
    3
  1995. šŸ¤·ā€ā™‚ļø
    3
  1996. Ā @phreakyzeke2864Ā How do you find time to make YT comments while ur making 5k a day? I must be in the wrong business.
    3
  1997. And itā€™ll be the end of it too. I have evidence! šŸ˜Ž
    3
  1998. @ZzzzfĀ  oh I wanted to repair it. Bosses thought that having the kid replace the engine would be cheaper. SMH
    3
  1999. He's still there, this nonsense was one of the last straws for me and I had to go.
    3
  2000. Good move. That's very easy to overlook.
    3
  2001. I thought so also. Apparently there is an abundance of these engines out there and not many buyers. Supply and demand. A high demand engine like a GM or Ford V8 costs much more.
    3
  2002. Yea I'm a shiny lanky dude
    3
  2003. Ā @DonaldAJrĀ  Itā€™s super tough to diagnose long range. I can say that NA engines live a much harder life when turbos are added. Making more power means more cylinder pressure trying to lift the head off of the block. When it comes to head war page, that usually occurs from severe overheating. If you pull the head to repair a leaking gasket, use head studs from ARP when itā€™s time to install. This is the way. BTW, itā€™s always best to send the heads to the machine shop for inspection
    3
  2004. 30 hours labor @$215/hr plus parts
    3
  2005. Exactly!
    3
  2006. I got this! Iā€™ve been building the skills for over a decade šŸ˜
    3
  2007. Itā€™s in storage (Iā€™ve been prepping for this moment)
    3
  2008. Not everyone is so inclined these days. Folks donā€™t know how to replace batteries anymore either šŸ¤·ā€ā™‚ļø
    3
  2009. I escaped
    3
  2010. lol he was Calvary, did two tours in Iraq
    3
  2011. I miss one occasion šŸ˜‰
    3
  2012. Ā @wwjoshdewĀ  I try my dude! Wayyyyyy too many comments! But I try āœŒļø
    3
  2013. šŸ¤£šŸ¤£šŸ¤£
    3
  2014. I think tires is where no expense should be spared. Itā€™s the link between car and road. ā€œA chain is only as strong as itā€™s weakest linkā€ I just dislike economy tires for that reason. They work and theyā€™re fine, but thereā€™s just much better options. I totally understand that folks arenā€™t made of money. Itā€™s one of those subjects where I would say that quality doesnā€™t cost, it pays.
    3
  2015. Mine are the harbor freight icons. Not snap on level, but who needs $400 curved wrenches? Not I.
    3
  2016. Failure to rotate ā€¦ I checked the wheel alignment and it was absolutely perfect
    3
  2017. Because AvE is awesome!
    3
  2018. We can mess with it after the warranty expires
    3
  2019. Thereā€™s a DEF system to inject urea AND a hydrocarbon injector to send in fuel to cook off the filter
    3
  2020. Yea that sticker is not $30 the thing is broken and it keep defaulting back to $30
    3
  2021. They found that term to be offensive bc china
    3
  2022. We can live in fear, or live our lives.
    3
  2023. Iā€™ll do such things moving in the future
    3
  2024. Ā @williamwilliams4559Ā  Thereā€™s an Yeaelectric pump In the tank all you have to is cycle the buttoned a few times the pump will actually and prime the system. Lube with fuel
    3
  2025. Yes I drive all of them before after service, including oil changes
    3
  2026. I dunno depends if itā€™s all sludged up. Double oil changed wonā€™t make a huge difference. If your going to go that route, get some BG crankcase cleaner for diesels. THAT stuff will clean it out for sure!
    3
  2027. Ā @catherinemorgan2741Ā  yes we have to right to remain silent in order to not self incriminate šŸ¤£šŸ¤£šŸ¤£
    3
  2028. šŸ˜‚šŸ˜‚šŸ˜‚ someoneā€™s got a crush
    3
  2029. Itā€™s in there, near the end. I stuck the mirror inside and actuated the valves
    3
  2030. How do you like it?
    3
  2031. Noise was super super faint. I could barely hear it with the scope. The customer and I agreed that the bearing was most likely because if he wanted it replaced. Couldnā€™t hear any more abnormal noise after the replacement.
    3
  2032. I think itā€™s for vibration dampening
    3
  2033. A proper big 3 is next! Itā€™s a patch job as it sits now, but the upgrade will be done soon
    3
  2034. The batteries were drawn down a little from the tester pulling 400a with the engine off. So when it was running, the fuel pump on the frame, lights and the blower fan were all running, that combined with the batteries sucking up power, we saw the 100a load
    3
  2035. šŸ˜
    3
  2036. Ya got me! I have carefully constructed my personality around an alternator! Do better sir šŸ«”
    3
  2037. Link to DC power Inc in description
    3
  2038. Iā€™ll totally build one for a customer!
    3
  2039. 808!
    3
  2040. Kill them ALL!
    3
  2041. You're right lol
    3
  2042. šŸ¤¦ā€ā™‚ļø
    3
  2043. Gotcha again!
    3
  2044. šŸ˜
    3
  2045. Itā€™s super high quality suspension parts. I wasnā€™t aware of ICON parts till this truck arrived. I like em
    3
  2046. Double ribbed belt. Some VWs use it as well
    3
  2047. Yea but I did it with excellence
    3
  2048. BG MOA
    3
  2049. Well crap, I made an editing opps! Sorry everyone!
    3
  2050. Friday night šŸ¤·ā€ā™‚ļø
    3
  2051. I managed to tidy up after this. It took a couple hours
    3
  2052. I saw it trashed South Carolina too šŸ˜„
    3
  2053. I donā€™t think so, but the kids to šŸ¤£ā¤ļøšŸ‡¦šŸ‡ŗ
    3
  2054. YT has been purging subs from channels for a couple months. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    3
  2055. And pump going off bc it thinks the read axle is locking up during braking, itā€™s false information from the circuit
    3
  2056. I invest in myself
    3
  2057. Gonna be a good day Tater!
    3
  2058. Ā @johanveningaĀ  no offense taken, this is what inflation looks like, worldwide our currency has been devalued, letā€™s hope we donā€™t see rapid pricing deflation in 2024, that will be the final nail in the monetary coffin
    3
  2059. $135 is low for my area, the average is around $180/hr
    3
  2060. Ā @IR-nq4qvĀ  itā€™s šŸ’Æ a weapon šŸ˜‰
    3
  2061. That was user error šŸ¤¦ā€ā™‚ļø
    3
  2062. šŸ˜¬ oops
    3
  2063. So see whatā€™s inside
    3
  2064. Thanks my guy! Glad youā€™re here!
    3
  2065. I thought yā€™all would like it. I think Iā€™ll do that for every dumpster fire deathtrap biohazard that I get šŸ¤£
    3
  2066. Ā @Noahboss67Ā  e mail me Iā€™ll send it to you
    3
  2067. It is, old habits die hard
    3
  2068. Be reckless on your own space. NOT on public roads! Iā€™ve done some pretty dumb things in my day, never to this degree.
    3
  2069. No no no i didnā€™t say anything about doxxing, Iā€™ll let the law deal with it later
    3
  2070. What!!!?
    3
  2071. I was thinking about all the covers that have been broken during removal šŸ˜¢
    3
  2072. Oh yes all the time!
    3
  2073. Hereā€™s the video mentioned in this video: Plastic Transmission Pan is NO MORE! BMW 540i 3.0 Turbo ZF8 https://youtu.be/ilNtEL7J1bo
    3
  2074. I think that one was the air compressor switch. Itā€™s has a little pump and lights etc
    3
  2075. More test drive footage... Caught Faking a Video? ā€‹ā Driveshaft Falling Out While Driving https://youtu.be/20gV1Dkg8-8
    3
  2076. Ā @Streamer687Ā  I have clip on ones magnetic ones suction cup ones head mounted ones chest mounted ones. I can put a GoPro anywhere that itā€™ll fit.
    3
  2077. Yes itā€™s reusable. And yes it goes through a filter to debris doesnā€™t contaminate the tanks
    3
  2078. Theyā€™re ok, no damage that can see. No flooding took place in this area. Scary thing is, had Milton gone 40 miles north, this are would have seen 10ā€™ of water
    3
  2079. You are aware that I read these comments, right?
    3
  2080. Jb weld šŸ¤£
    3
  2081. Ā @najay0Ā  ohh thatā€™s scaryšŸ˜±
    3
  2082. Bc they sold me a junk part as new and I had to take it apart to prove it
    3
  2083. Yea it was junk, the guy didnā€™t want to put an engine in it, he ended up selling it
    3
  2084. Ā @timothyweers8054Ā  Vit C and zinc too!
    3
  2085. Remember to force feed yourself! When I lost smell I lost appetite and found myself not eating for a couple of days, it took months to get hungry again, and many foods tasted terrible after. I still canā€™t enjoy red sauce. Wishing you a speedy recovery
    3
  2086. I have some high speed footage of the engine going back in and a fist start video
    3
  2087. Chai-NA šŸ¤£šŸ¤£šŸ¤£ So much fun to say
    3
  2088. Boys we donā€™t need to have a Trump fight here. Letā€™s play nice.
    3
  2089. We call it lizard lotion now šŸ¤£
    3
  2090. Lawrence McKeon I'm white, f u.
    3
  2091. Whaaaat? I sold all that guys caliper tools?
    3
  2092. A wizard arrives precisely when he means to- Gandalf the grey
    3
  2093. We do truck stuff. Like hauling boats and ATVs campers and equipment ect. Need more horsepowers
    3
  2094. Still a dodgeā€¦ always going be a dodge.
    3
  2095. Ā @thehulkamaniabrother2.089Ā  Didint even realize I said 5.3 šŸ¤£šŸ¤£ Iā€™m a GM guy, 5.3 is burnt in pretty deep
    3
  2096. Itā€™s coming
    3
  2097. Iā€™m waiting for Eric to finish the engine. They just slammed with a hailstorm this week so Eric is putting out fires right nowā€¦heā€™s delayed
    3
  2098. I did
    3
  2099. I arrive precisely when I intend to...never late
    3
  2100. Itā€™s Dormans fault šŸ˜
    3
  2101. As a former GA resident I feel your plight
    3
  2102. Liar
    3
  2103. Sry Samir, not for sale
    3
  2104. $600 for the hubs
    3
  2105. Weā€™re so desensitized to these historical eventsā€¦ it like ā€œAliens, OKā€¦. And?ā€
    3
  2106. šŸ˜‚ right
    3
  2107. Cork gasketsā€¦the trailblazers can stay
    3
  2108. Exchanged it with the machine connected to the fluid outlet port
    3
  2109. I was even going nuts, but I wasnā€™t going to crawl out again
    3
  2110. Ā @Boodieman72Ā Thats what I thought as well, smart business plan IMO. The quality is suburb as per initial testing.
    3
  2111. Ha! The new condenser came with clipsā€¦ The old ones are now minešŸ˜
    3
  2112. Nooo . šŸ˜• It has a core charge
    3
  2113. Ā @evropapagan5551Ā  they donā€™t make ā€˜em like they used to
    3
  2114. The other nut was a pinch lock nut, no cotter pin required. There are deformations in the threads that lock the nut into place.
    3
  2115. Oh all the time! But itā€™s our actions that define us. Having said that, I find ways process things that piss me off. The phone is a great example, all day longā€¦. Dooo deee dooo dooo!
    3
  2116. I didnā€™t Fail. I deliberately removed them.
    3
  2117. 1/4ā€ and 3/8ā€ are my go to. 1/2ā€ is on the big side but still useful. No particular reason for the make of gun. I have a bunch of ridged tools and the 1/2ā€ impact is fairly inexpensive. I like the Milwaukee bc they have so many different tools from soldering irons to impact guns and even lawn tools
    3
  2118. If you donā€™t push, youā€™ll eventually get run over
    3
  2119. I toe the line šŸ˜‰
    3
  2120. Correct, however they do absorb impacts
    3
  2121. Hi Roger
    3
  2122. I suspected it was something along those linesā€¦but I just donā€™t know the states that well to do much except to roll the dice. And I donā€™t gamble
    3
  2123. Itā€™s a duralast from AutoZone, bought it back in 2002 šŸ˜¬(time went by fast)
    3
  2124. Whoā€™s gonna to pay for that? Each connector costs about $32 and Iā€™ll bill .4hr per connector so $600 for connectorsā€¦.not worth it
    3
  2125. $10,000
    3
  2126. Yea what is it??
    3
  2127. We stash ice bags in the fridge and load the freezer with it to hold the cold šŸ„¶
    3
  2128. Make ice and bottle some extra water šŸ’§
    3
  2129. I reacted to give the penetrating oil as much time as possible to break down the rust before attempting to remove those nuts. But yes normally I wouldā€™ve remove the master cylinder first
    3
  2130. I know right! Because you totally know what they were charged for! Good job detective
    3
  2131. lol no just mine, itā€™s like 10yo
    3
  2132. I thought that to for a moment
    3
  2133. I dunno yet. They owner and the dealer have all the info. They need to make a decision. I'll post the repairs if they have me go any further.
    3
  2134. Fear not, I can save this engine. The lot is paying for it, they have her a loaner in the meantime. I'll make a repair video. Hint: not head gaskets.
    3
  2135. @Klip One Thanks! Glad you're here!
    3
  2136. Love your vids
    3
  2137. Sadly no, I thought I was but the seller took it back and was going to have someone else to the repair, maybe his own shop. I dunno
    3
  2138. I'm indifferent on the blame here. You're probably not wrong. But the folks who serviced this timing cover didn't verify the repair. I think they forgot to install the butterfly gasket that seals water pump coolant passages through the timing cover. The car lot used a cheap mechanic, and got what they paid for. Now they have an angry customer. One the bright side, I think I can save this engine. I did a leak down test and I think the heads and head gaskets survived. Unfortunately, I think the lot is going to tow it back and have the same guy fix it. (He costs less than I do) That being said, this is a classic example of getting what you pay for.
    3
  2139. Always is šŸ¤£
    3
  2140. The shop has two Autels. Theyā€™re good, and I have a couple value brand tools too. But in the world of tools, you get what you pay for IMO. Example: Iā€™m having a hard time diagnosing something and Iā€™m frustrated, a lightning quick reliable scanner doesnā€™t add to it, weā€™re a slow annoying scanner can be the icing on the cake in the moment. Plus the expensive ones do offer more features that can really help out when it counts
    3
  2141. Iā€™m in Sarasota. Hondaā€™s are great IMO. As with most things, it depends on what youā€™re looking for. The real factor, is how well are things maintained.
    3
  2142. I dunno , I like my Blair Witch style of shooting šŸ¤£
    3
  2143. šŸ‘
    3
  2144. Thatā€™s my scotch tape
    3
  2145. I agree. We can take the negative and make it a positive. But today I needed to burn someone a little.
    3
  2146. Itā€™s a superpower šŸ’ŖšŸ’Ŗ
    3
  2147. Ā @toethumbmechanicsĀ  šŸ¤£ Itā€™s a 3/8ā€ Itā€™s not powerful compared to a regular impact and not small like an electric ratchet. But it comes in handy
    3
  2148. Ā @joegm74Ā  email me plz
    3
  2149. Same one
    3
  2150. I may have mentioned a harbor freight unit for home home use purposes. Mine is a Snaponā€¦ $479
    3
  2151. There is a check valve (one way valve) at the end of the vacuum line. The concept is that if the engine dies while driving, there is still enough booster vacuum to maintain braking assistance for one stop. Super good question!
    3
  2152. Iā€™m out of gas
    3
  2153. I just like regular screwdrivers
    3
  2154. I do. These days I buy tools bc I want them, not bc I need them.
    3
  2155. Didnā€™t you hear? My threaded ratcheting caliper compressor was not with me at the shop that day. It was in my other box at another location.
    3
  2156. Busy work, I think heā€™s in trouble šŸ˜‰
    3
  2157. It says ā€œfor disk brake useā€ on the tub
    3
  2158. Yea that way too
    3
  2159. I usually use the purple permatex lube, but we were out. The tub is high temp and can be used for disk brake applications. I would use no lube before using the wrong lube šŸ˜Ž
    3
  2160. Unfortunately, things didnā€™t work out. Iā€™m here freelancing it right now on this Jeep project. Itā€™s in a few other videos. Iā€™ve installed several custom parts including a lift kit and bumpers. Iā€™ve been interviewing around town fire several days. Itā€™s a buyers market right now for technicians and Iā€™m looking for a long term parking spot for my tool boxes.
    3
  2161. Making it shiny to use as a display in the showroom
    3
  2162. Heā€™s good! šŸ‘
    3
  2163. You need 3-4 cans of glue I think, mine needed two and I wish I had a 3rd
    3
  2164. I donā€™t where youā€™re mind went, those are all standard automotive terms šŸ˜‚
    3
  2165. Yea still having shortages. Not the case in this particular instance. The body shop just wanted to get a used pay again, but itā€™s not local.
    3
  2166. Zip ties bc the clip ws broken
    3
  2167. šŸ¤£šŸ¤£
    3
  2168. Garden hose
    3
  2169. Keep the fire burning
    3
  2170. Folks will be at the beach šŸ¤£
    3
  2171. This is the way
    3
  2172. Ā @a-yatesĀ  Absolutely! I wish I had this years ago
    3
  2173. Those were the right words...or there is another, it's escaping me as well.... She's involved which makes this whole thing possible. I couldn't do it my myself
    3
  2174. I brined them using them as a prybar, ordering two sets now bc I really donā€™t like pliers for hose clamps. They slip and I pinch my fingers
    3
  2175. If only someone would send this video to the Manatee County Sheriff's Office
    3
  2176. šŸ˜‚šŸ˜‚
    3
  2177. Not very often. But when something is way out of the normā€¦one has to pay extra attention and document well
    3
  2178. Me too šŸ¤£
    3
  2179. Itā€™s cool, marketing called, once legal gets involved nobody win.
    3
  2180. Have some coffee šŸ¤£
    3
  2181. No slander comitted here
    3
  2182. I was lubing the geared section of the drive mechanism, not the motor
    3
  2183. šŸ‘†šŸ’Æā¤ļø
    3
  2184. I expect descent human beings to step forward and rise to the challenge. Iā€™ve seen enough of your commentary on this video
    3
  2185. Just had to set a few things straight right from then get to šŸ˜‰
    3
  2186. My reply keeps getting deleted. so f u
    3
  2187. I prefer the lb7 though. Itā€™s arguably the best version bc of the lack of failure prone emissions control devices.
    3
  2188. šŸ˜±
    3
  2189. Thatā€™s for the body shop, they forgot to order it šŸ˜Ž
    3
  2190. Ā @gwrider2146Ā  lol itā€™s a sick game we play
    3
  2191. Left it for the body shop guys to install
    3
  2192. ā­ļø gold star for you
    3
  2193. Ā @kevink8481Ā itā€™s a running joke, no feelings were hurt over the spray cans
    3
  2194. Ā @rodneydrew9117Ā we do, most business are closed on 1/1. But I wasnā€™t hungover and decided to work
    3
  2195. Ā @applepoop10Ā  Might get stuck on a boat ramp with a jon boat tho hahahah
    3
  2196. Easier said than done. Those tubes are tough.
    3
  2197. Suggestion is install the correct part they first time, that way I don't have to. If I don't kick this back at the upfitters they will never learn to be good at their job. Then I have to fix this stuff all the time
    3
  2198. No doubt, Iā€™ve blurred things out before and still people figure it out.
    3
  2199. Just marking my territory
    3
  2200. No it was a just freebie
    3
  2201. Get after it brother! And screw the haters āœŒļø
    3
  2202. Never šŸ‘Ž serviced
    3
  2203. Roger!!!! šŸ‘‹
    3
  2204. A rod is late šŸ¤·ā€ā™‚ļø
    3
  2205. No worries fellas, the oil will be changed before itā€™s done
    3
  2206. Maybe šŸ˜‰
    3
  2207. The EPA happened, and we tried to legislate a desired result at great cost to the consumer. Domestic diesels are a perfect example. They come equipped with thousands of dollars in failure prone emissions systems that the end user has to pay for, however, vehicles built for export do not have the mandated equipment and the OEMs are free to ship them overseas all day. America Lastā€¦itā€™s been that way for decades
    3
  2208. Because itā€™s going to be drained before the job is done. No worries on the oil contamination
    3
  2209. Tell me the truthā€¦ are you guys messing with us with the trains parked across 41 at 8am? You know what youā€™re doing šŸ¤£šŸ¤£
    3
  2210. No itā€™s not. I have different fluid types in the BG boxes
    3
  2211. I was mocking some trolls. It wonā€™t hurt anything before evaporating. It can damage rubber and plastic if it were soaking in a puddle of brake clean over time
    3
  2212. I knew there was a calibration button! Thanks! Iā€™m still figuring out this meter
    3
  2213. Long enough to close up and clean a few things
    3
  2214. nooooo!
    3
  2215. negative
    3
  2216. šŸ†
    3
  2217. Iā€™m reaching pro level YouTube status now šŸ¤£šŸ¤£šŸ¤£
    3
  2218. It was warranty, I was working at a dealer, at the time
    3
  2219. Brake clean for sure. These cans Bug me. We can purchase cleaner in a 55gal drum and uses refillable containers to spray, but the company prefers to buy cans šŸ¤·ā€ā™‚ļø
    3
  2220. Ā @johntarver5684Ā  šŸ‘€
    3
  2221. You saw it early through a link in the pt 2 video
    3
  2222. Over 4 hours, then I hung up
    3
  2223. That's for AVE 100%
    3
  2224. Reeeeee! Has developed around here as a laughable mocking term for when the ā€œyouā€™re doing it wrongā€ comments come in.
    3
  2225. I jumped way worse when I watched the video while editing then I did when the spring let go IRL
    3
  2226. Ā @ChiefsFiremanĀ  Iā€™m not trying to jinx you, but what if itā€™s the wrong one šŸ„ŗšŸ¤£
    3
  2227. I show up from time to time. I like to focus on the work not myself
    3
  2228. You never know when a part is going to fail. In this particular case, the sensor was working, but failed the ECMs pressure drop tests because it wasn't in it's home. Who knows why or whom was in there before me. Maybe it got a new fuel pump or level sensor at one point.
    3
  2229. You know better than that... Don't make assumptions
    3
  2230. Space usage
    3
  2231. Im not sending you links. Scammers are sending you links. And then I have to ban them all day. Itā€™s rather annoying and quite frustrating. Those are fake accounts that use my logo
    3
  2232. Happy Independence Day!!
    3
  2233. Ā @IR-nq4qvĀ  I totally know itā€™s not your store, itā€™s the other store
    3
  2234. I dunno, weā€™ve been paying twice as much for half the value while using a diluted/inflated currencyā€¦there a few things that need some work. šŸ˜‰
    3
  2235. Towels...blue ones
    3
  2236. I was having fun with Sam and then he deleted his comment, which deleted everyone elseā€™s comments. I thought we had a good thing going šŸ¤·ā€ā™‚ļø
    3
  2237. I could not do anything and make insulting comments to strangers
    3
  2238. I found a real nice vent that has cpu fans in it to pull air in and out, I have two on order
    3
  2239. Worth a shot šŸ¤·ā€ā™‚ļø
    3
  2240. noo i was watching the road
    3
  2241. Very dangerous territory here in the interwebs! No doubt!
    3
  2242. Iā€™ve imagined such a thing. Drag race only!
    3
  2243. New generation of assault lights. They should require a 4473 soon and mandatory flashlight safes
    3
  2244. Iā€™m wondering how you know that, I didnā€™t even put the oil pan back on yet
    3
  2245. Pete is being quiet lately. I think heā€™s got a few demons to battle right now
    3
  2246. Yes I store it in drums and have it pumped out and recycled
    3
  2247. He good!!!
    3
  2248. Whooo hooo!!!!
    3
  2249. Sometimes the counter people do, sometimes I do. Iā€™ll step in if we have a lot to go over or if a diagnostic needs to be explained. I usually always explain everything I find that is safety related.
    3
  2250. Negative
    3
  2251. Fair assessment. The place is already looking better, everyone is out cleaning and repairing. šŸ‡ŗšŸ‡øšŸ’Ŗ There will be evidence of this for decades but weā€™ll get things back to life again
    3
  2252. Hey like I said, thatā€™s what power co initially posted and it could change. Not trying to spread the wrong info. I know that words are powerful and things could go south with statements. I really hope a year wonā€™t not the case, and more than likely, even if the power line is damaged beyond repair, they will piggyback some kind of stop gap solution
    3
  2253. Itā€™s early šŸ™„šŸ˜‚
    3
  2254. Iā€™m cheap šŸ¤£šŸ¤£šŸ¤£
    3
  2255. The AI is a scary thing when you think about it
    3
  2256. Bobcat is a brand name. Skid steer is the equipment type. However, the equipment type has long been referred to as a bobcat due to bobcats, popularity in the skid steer market.
    3
  2257. That flag is badly torn and needs to be properly disposed of. Iā€™ve since rolled it up and moved it into the office until itā€™s time.
    3
  2258. HAHA I see what you did there. It's going to get to everyone at some point. We have all had the flu haven't we? Almost all of us has the chicken pox, and a cold or two every year. The problem is't the bug, its the FEAR!
    3
  2259. because of the wheel alignment measurements after the repair
    3
  2260. I tend to work my way up to the more aggressive tools. Ask, Tell, MAKE, is the concept
    3
  2261. Check out the Boss Audio head units on Crutchfield .com
    3
  2262. It's smaller evaporators to some degree, less refrigerant used, shorter duty cycle etc. Bottom line, everything is less then what it was in the 2000s
    3
  2263. Ooohh those G vans. They like to eat their compressors alive and send metal through the condenser. This can be confirmed by checking for debris in orifice tube/screen. Sometimes the fan clutch goes out on those too. You still have bumper to bumper warranty? If so let the dealer fix it.
    3
  2264. Keep in keepin on. We all start at 0
    3
  2265. Wordsā€¦ā€¦ lol ya got meā€¦. Fixed šŸ˜‰
    3
  2266. Sure did, I have to get new trim and window track, but the hideous red is now gone
    3
  2267. Everything is under control. No worries.
    3
  2268. Ā @darknes7800Ā  But the loads have increased and the alt output wire is now too small.
    3
  2269. Yes it will!
    3
  2270. Busing doing what????? šŸ¤£ BTW, whoā€™s in charge now? It seems like nobody is at the helm after the last debate
    3
  2271. Just keep it movinā€¦.Vegas rules not mine šŸ˜‰
    3
  2272. I have a unique way with words sometimes šŸ˜‰
    3
  2273. The problem is that they drove it around running gasoline, the fuel system was eating itself alive
    3
  2274. Both are from last week but I wasnā€™t ready to post them yet
    3
  2275. Ā @texasscot6669Ā  That seems like it would be difficult to achieve
    3
  2276. Are you using the right email?
    3
  2277. Itā€™s was in the low 50sā€¦thatā€™s serious around here šŸ„¶
    3
  2278. Donā€™t sell ANYTHING! Itā€™s buying season! (Iā€™m an not a financial advisor and this is not financial advice)
    3
  2279. Ā @CheepchipsableĀ  maybe so, but Iā€™m enjoying it so far šŸ˜šŸ’Æ
    3
  2280. Itā€™s a sealed unit and the actual bearing is not serviceable
    3
  2281. America need to be bright back to life
    3
  2282. šŸ’ŖšŸ’ŖšŸ’Ŗ
    3
  2283. Thereā€™s that yellow circuit breaker on the firewall. It will trip at 200a or I can manually disconnect it
    3
  2284. It was referenced by the stickers. They were both indexed on the same side. Getting the two shafts 180* out works have made major vibrations. They are balanced as an assembly
    3
  2285. Channel members have early access šŸ‘šŸ‘
    3
  2286. Really it does. $140-180 for a recharge up to 3lbs refrigerant, $10-20 for valves, taxes, fees, Etc puts it around $200(ish)
    3
  2287. I made a link for you. Itā€™s in descriptionšŸ˜‰ Flippin cold down here too. 27* this morning, 55% humidity, we are having a hard time
    3
  2288. I canā€™t say I miss the snow. But I feel your plight. Itā€™s 34* this morning with 55%humidityā€¦we have wet cold that chills to the bone
    3
  2289. She's the youngest and she a little crazy child. The way she made random appearances in the background way back when, reminded me of supernatural sightings, and it reminded me of the x files
    3
  2290. Thanks!
    3
  2291. Been busy
    3
  2292. And an equally blablabla comment šŸ˜†
    3
  2293. Ha! Never thought Iā€™d have 10k, never aspired to eitherā€¦ but nowā€¦. I want that gold plaque šŸ¤¤
    3
  2294. I knew better
    3
  2295. Sometimes people just suck
    3
  2296. Oohhh that sucks Dave. Hang in there brother! I wish you well
    3
  2297. Yea I used Lucas Oil Stab on the journals
    3
  2298. All is well, I did a recheck and found it.
    3
  2299. Ā @blightborn87Ā  I canā€™t disclose repair costs online. We did the job super cheap to try and save the engine, and the kid was pretty low on funds.
    3
  2300. Boys with toys
    3
  2301. It was actually an impromptu visit. Weā€™ll plan better next time
    3
  2302. They read these commentsšŸ‘šŸ‘€ @bankspower
    3
  2303. Have a superior day today!!!!
    3
  2304. Stupid sleals
    3
  2305. LMAO your right it does!
    3
  2306. 120k
    3
  2307. Blame the EPA. The mandates that they push, force engineering to constantly redesign. All of these redesigns meet EPA requirements but in the long term reliability suffers badly. Take diesel engines with the particulate filters and DEF injection for example. They produce fantastic emissions numbers when new but cost of fortune to maintain in the long run.
    3
  2308. I šŸ’• a pushrod engine. Tried true and proven.
    3
  2309. Yea did. Then made a video after the heads were off
    3
  2310. Ā @clbcl5Ā  I dunno about that, yā€™all get priority responses too šŸ˜˜
    3
  2311. Because It's schedule to post at 6am, but it's uploaded now, so I make it available to channel members until it goes live.
    3
  2312. It suppose I could be convinced to buy a different manufacturer. It would be a hard sell though. The newer DURAMAX trucks are still pretty good and I like square wheel wellsšŸ¤£
    3
  2313. The steeper motor in the gauge cluster is bad. Common with this particular design. Iā€™ll fix it one dayā€¦maybe
    3
  2314. lol all of them! šŸ¤£ The big camper trailer isnā€™t mine, that one belongs to my in-laws, then thereā€™s my enclosed cargo 16ā€™ and my 16ā€™ flatbed. Iā€™d really like to get a gooseneck dump trailer too.
    3
  2315. Itā€™s an 07 one of the last built with this body style. 191k on the clock
    3
  2316. šŸ¤£šŸ¤£šŸ¤£šŸ‘ I want a big boat next. Had an old 25ā€™ Hydrasport a few years back. One day I want to get into a 30-38ā€™ powered by a diesel or two. And yes, I fantasize about a pair of 6.6 Duramax V8s in the engine room!
    3
  2317. 191k
    3
  2318. Throw it in a box
    3
  2319. I canā€™t win. Electrical connections on YouTube are like welding on YouTube. Itā€™s best to just cut that scene out šŸ˜‚
    3
  2320. That whole engine platform is actually quite good. The stuff that I fixed in these videos are the Achillesā€™ heel of this engine family.
    3
  2321. The large single bolt in the front? Itā€™s tight. It went in and out a couple of times (cut scenes)
    3
  2322. Thx for letting my know, I went in and took some away. YT populates the adds šŸ¤·ā€ā™‚ļø
    3
  2323. Thereā€™s like assault microwaves, hammers, assault pliers etc
    3
  2324. Clever
    3
  2325. Iā€™m only used to self promotion, trying to learn other promotions šŸ˜‰
    3
  2326. Iā€™ll get one
    3
  2327. Itā€™s a real shame isnā€™t it? We (people) have the ability to make the world (and internet) a marvel of civilized culture and a milestone for humanity. We choose to destroy each other anonymously and tear down societyā€¦... ā€œThe shroud of the dark side has fallenā€- Yoda Thereā€™s a saying ā€¦if you make the world a better place make YOUR world a better place
    3
  2328. šŸ˜‚
    3
  2329. I finally posted one on time too! šŸ¤£
    3
  2330. Negative
    3
  2331. Sorryā€¦had uploading issues with this one
    3
  2332. Heā€™s learning
    3
  2333. Wish he were here HAHAHAHA
    3
  2334. They're on the back porch, the coop blew over
    3
  2335. Everyone saw that except me šŸ¤£
    3
  2336. Remove v6 install v8 problem solved
    3
  2337. I know šŸ˜ž I feel there are some who donā€™t see it coming and theyā€™re going to get hit very hard.
    3
  2338. šŸ¤£šŸ¤£
    3
  2339. I read about it, itā€™s a recalibration module to adjust for the larger MAF tube
    3
  2340. Itā€™s a diesel, they donā€™t have a throttle
    3
  2341. Ā @scott.koopmannĀ  I do not charge $168/hr Edit: And the engine that I bought months ago disappeared in transit on a Yellow freight truck during their company closure
    3
  2342. Neglect
    3
  2343. Hmm .. no Iā€™m good here. Just provoking some trolls. I get my kicks like that sometimes šŸ¤£. At the end of day, this is all fun for me
    3
  2344. I have. It takes a very long time to process in my videos, I think itā€™s because there are so many sounds in the background. It fails most of the time and makes me cut out the segment entirely or I have to mute the segment. Thatā€™s why i change playback speed while editing.
    3
  2345. I totally paid retail, bought them from ebay....Internet sellers SMH
    3
  2346. Ā @tommyboy7598Ā  What does that even mean?
    3
  2347. Ā @TrukNLife316Ā  sorry to hear that I'm really far away in southern Florida
    3
  2348. Ā @bug2011Ā  Than you! Nice things usually don't make it to the internt. You made day.
    3
  2349. Water makes its way past the glass in the door seal it into the door interior it happens on all cars. There are small drain holes at the bottom of the door panels on the outside of the seal these particular drain holes became clogged with pollen in tree debris causing water to fill up inside of the door
    3
  2350. Nissanā€¦ the Chrysler of Japan. Same category as the PT šŸ˜‰
    3
  2351. YT does it
    3
  2352. She watches in the morning , so Iā€™m good till tomorrow
    3
  2353. Ā @saltycreole2673Ā  oooh chicken math!! Good luck!
    3
  2354. Never broke a chime with the electric. The hurt softer but faster than the air guns. Iā€™ve cringe a few with the air guns but itā€™s kinda rare if using a quality socket
    3
  2355. Anti Gravity
    3
  2356. Look in the description
    3
  2357. Nope, canā€™t do that. My house is the shelter for the coastal folks. We will have several people here to ride it out.
    3
  2358. I'll get something out. I have some cell phone video of bolting on my shutters n such
    3
  2359. Not yet! But Iā€™m super excited!
    3
  2360. Itā€™s comingā€¦we have a parts delivery delay
    3
  2361. WTF Iā€™m only 37 šŸ˜
    3
  2362. It is what it is šŸ¤·ā€ā™‚ļø IG
    3
  2363. Iā€™m counting these comments today šŸ˜‰šŸ¤£šŸ¤£
    3
  2364. You got itā€¦. Iā€™m just modest and donā€™t like to float my own boat šŸš¤
    3
  2365. Sounds like Cliff to me! Small world my friend!!
    3
  2366. It very well could be, but the problem is that the sticker is extremely broad and divisive. I believe their goal and message comes for a genuine interest in solving a problem. But I donā€™t believe that it can be accomplishes by creating another problem.
    3
  2367. It was under that dust shield. I didnā€™t show it but I clicked the shied into place after billing in the shocks. Good eye
    3
  2368. I know thatā€™s the joke! You rocket surgeons are so serious!
    3
  2369. I didnā€™t use the torched bearing
    3
  2370. I wonder that myself. I literally caught that bearing on fire (plastic and grease) and people think I reused it šŸ¤·ā€ā™‚ļø
    3
  2371. Yea YT does that all the time. Itā€™s really annoying
    3
  2372. I did not but I want it. Itā€™s still here bc I ordered some switchback lighted tow mirrors for it
    3
  2373. Busy day today šŸ‘
    3
  2374. Yes I will šŸ˜‰
    3
  2375. Ohhh no I had an oversight and melted my tool! Ohhh no!
    3
  2376. Iā€™ll be editing and hear a ā€œwhat are you doingā€ from the next room
    3
  2377. It was hiding behind the sway bar
    3
  2378. You should really consider it at 300k šŸ˜³
    3
  2379. Thank you!
    3
  2380. But its free
    3
  2381. I appreciate the effort and time invested
    3
  2382. Its usually one of the phases (camshaft gear) I treat them like a ford 3valve and replace everything
    3
  2383. This is ok sir. Any spillages are washed away, never let it linger.
    3
  2384. It is unlawful to repair a brake system hardline with flares and a union
    3
  2385. Every now and thenā€¦has a Buick once that needed a heater core. I erotic have had to work under the dash and lay on the floorboard. The problem was, the driver used the passenger side floor as a spittoon for chewing tobacco. It was two inches thick with spit and skoal
    3
  2386. Ā @JushwaĀ  I really donā€™t know what heā€™s trying to say, it bothers me
    3
  2387. Huh?
    3
  2388. I think $150 is slightly high, but the area could be influencing that. Rust or no rust is a big deal on something like this.
    3
  2389. They all have unique an individual flow rates similar to a fingerprint the ECM needs to know the characteristics of each individual injector in order to calculate the pulse and duration in which the injectors fired. Excellent question I shouldā€™ve touchdown that in the video
    3
  2390. Theyā€™re sending me a set of injectors to test
    3
  2391. I stay downwind and hold my breath. Sometimes Iā€™ll walk away to take another breath till it clears.
    3
  2392. Gotta hit those search terms šŸ˜Š
    3
  2393. It's condenser video
    3
  2394. Negative, there is no TXV here, there a little insert with a tiny orifice in it to regulate low side pressure
    3
  2395. I was actually planning on looking into that, I donā€™t think is regulated properly. This torch needs a new tip too.
    3
  2396. The ecm does factor in downstream o2s on Chryslers. It wants the cats to be at the right temp for emissions
    3
  2397. It maybe lost, but I know where it is
    3
  2398. I have figured this outā€¦didnā€™t realize things may have changedā€¦.this is why I donā€™t have sponsors šŸ¤¦ā€ā™‚ļø
    3
  2399. That ainā€™t right
    3
  2400. Heeeeyyyy
    3
  2401. Life achievements
    3
  2402. Iā€™m still in denial
    3
  2403. šŸ˜
    3
  2404. I dont think they make an electric 1 ton truck yet
    3
  2405. Ā @geneyus6411Ā  I can shave Dā€™s for ya
    3
  2406. I confess. I do like to place games every now and then with some camera trickery. No towels were consumed by the engine
    3
  2407. I talked to his dad the other day. Heā€™s been moved to a specialty facility. Heā€™s in there, but not conscious. This is going to be a long road, but heā€™s still in the fight
    3
  2408. Hi Ian!!
    3
  2409. She had a good laugh at that one. šŸ˜
    3
  2410. Ā @jimmylarge1148Ā The Jig is up! You got me! šŸ¤£
    3
  2411. What do you say to the S&S injectors?
    3
  2412. 150-220/hr
    3
  2413. I hope they have a drill it šŸ¤£šŸ¤£.
    3
  2414. Nooooooooo! Itā€™s not good. Can clog things
    3
  2415. Itā€™s permatex caliper grease
    3
  2416. Agreed. I was being pulled several directions at once. Annoying
    3
  2417. ā€˜Twas a gift from a viewer
    3
  2418. šŸ–•em šŸ¤£šŸ¤£šŸ¤£
    3
  2419. Ā @tomokokuroki2506Ā  šŸ˜‚ It doesnā€™t need my help
    3
  2420. Sent by a viewer long agoā€¦Iā€™m not Swedish
    3
  2421. Yea I had enough time to make YouTube videos I have my own shop now and still have time to make YouTube videosā€¦soooo thereā€™s that
    3
  2422. I did a lot of off camera
    3
  2423. The diesel generators that charge them do! (šŸŽ¤drop) šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    3
  2424. I dont have one šŸ¤·ā€ā™‚ļø
    3
  2425. I should have flipped the belt inside out. It would have been a breeze
    3
  2426. Thereā€™s an Amazon link in my description to them. Theyā€™re called ā€œMountain flex head ā€œ
    3
  2427. I accept. Email me at RainmanAppointments @gmail
    3
  2428. šŸ˜Ž
    3
  2429. It was already there under the cap.
    3
  2430. I didnā€™t unpin a wire, pin 38 was an empty slot in the connector
    3
  2431. Heā€™s reading this comment šŸ¤£šŸ¤£
    3
  2432. Plus there is no new inventory right now. The lots are empty. The dealers say they that they sell before the deliveries come, but thatā€™s been the story for over a year.
    3
  2433. Iā€™ve do t those things once or twice
    3
  2434. If we only had some kind of pipeline to increase our oil supplyā€¦we could become energy independent and then sell our surplus in the world market
    3
  2435. This one was asking for it with the ass eating sign šŸ¤£
    3
  2436. šŸ¤£šŸ¤£šŸ‘‹
    3
  2437. Maybe the Mandela effect is here
    3
  2438. Hmmmmā€¦. Future noise mocking opportunity šŸ˜
    3
  2439. Yay!!!!
    3
  2440. Iā€™m standing in front of it
    3
  2441. Itā€™s worked out of, this is the way
    3
  2442. First would have visually inspected the system for leaks, if none were located I would have proceeded to charge the system, and use a refrigerant detector or ā€œsnifferā€ to check the evaporator inside is the dash. Unfortunately it can take some time to detect small leaks at the evaporator due to the volume of air inside the dash vs the concentration of refrigerant needed to activate the tool. I usually do this by parking it overnight and running a probe down one of the vents. (With windows up to prevent airflow from outside) After sitting overnight, some refrigerant should have escaped into the vent system, thus allowing the sniffer to detect it. Gaining access to the evaporator is time consuming because the dash usually has to be removed.
    3
  2443. Wrong kind of brake clean
    3
  2444. Fiona and me on Sunday
    3
  2445. No faster, think of the gears on a bicycle
    3
  2446. Totally! that strip is good for 15a, the inverter has three other plugs if needed. Realistically, in the scenario that this system is designed for, I wouldn't be using more than 20a total. In a no power situation, I'm running one fan, my router (we usually have internet when power is out) two refrigerators and a deep freeze, plus some lights. We're talking an average amp draw of about 4-8 amp assuming that refrigerators are not all running at the same time. And its just for night time so I don't have to run the loud gas generator. During daylight or high power requirement, we run the regular generator.
    3
  2447. Thereā€™s a primer plunger on the housing and you tell me to prefill the filter
    3
  2448. Absolutely!
    3
  2449. Good move!!
    3
  2450. Iā€™m in trouble, the fellas threw it in the trash. šŸ˜¬
    3
  2451. It's a push pin pin remover. Also works great on door panel clips because it's super long. The one I'm using is snap on.
    3
  2452. Iā€™m not here to shame anyone. If this car belonged to a homeless person, very elderly person or someone with some screws loose Iā€™d NEVER post this. But this dude had an iPhone
    3
  2453. šŸ¤™šŸ˜ŽšŸ¤™
    3
  2454. @Madmaximus I like shorter ones too, but itā€™s very hard to make considering my content type
    3
  2455. He would agree! Itā€™s happened
    3
  2456. I threw food at her at a restaurant that we worked at šŸ˜‰
    3
  2457. I spent a lot of time learning the cam last night (hours) Iā€™m certain the shots will improve soon
    3
  2458. No heā€™s still here!
    3
  2459. I think I said ā€œerrrrrrā€¦..regardlessā€
    3
  2460. I think it could easily pay for itself in one year
    3
  2461. It's filtered stored in the machines tank and reused
    3
  2462. Welcome! Glad youā€™re here!
    3
  2463. I wanted to do that too bc theyā€™re all mismatched and physically brokenā€¦DECLINED!
    3
  2464. Ā @SabretoothBarnacleĀ  I made a new one ā˜ļø
    3
  2465. Fr I canā€™t delete them fast enough
    3
  2466. FluRona got me
    3
  2467. The refrigerant is recovered as a gas so it canā€™t carry large debits. Itā€™s filtered and then reused.
    3
  2468. Indeed the company is just fine with what I did! Itā€™s not revenue lost, itā€™s trust earned!
    3
  2469. The thing is, I will gladly work six days, as long as im on the schedule for only 5. I left the dealership because they tried to make my voluntary six day work week a mandatory six day work week. I donā€™t get down with mandates
    3
  2470. None yetā€¦.but I havenā€™t check my PO Box yet šŸ˜¬
    3
  2471. 4thā€¦ close šŸ˜Š
    3
  2472. Absolutely
    3
  2473. Ā @nigelfuller1840Ā  Thatā€™s like saying Tyger
    3
  2474. PART ONE! Monday. Day 1 Prepping! Hurricane IAN: Live ish update from Gulf Coast Florida https://youtu.be/tfuPjxcl6ks Part Two! Initiate Fortress Mode! Hurricane IAN | Live Update ish PT 2 https://youtu.be/t72N8F_lJ8U Part Three! Itā€™s Not Flooded Yet! Hurricane IAN Update. PT3 Live ish https://youtu.be/h5lPL_aNEOw Part Four! Hurricane Ian Live ish Update! Cat 5 upgrade! Itā€™s getting Real Now! https://youtu.be/lc5ejt_AXGI
    3
  2475. Never thought of an injector problem šŸ˜¬
    3
  2476. Defiantly not a 3valve šŸ¤£
    3
  2477. Bodyshop knows
    3
  2478. I leave my rears out back bc I donā€™t want to rotate dismount and rebalance. (You know the clean side of the wheel vs dirty side on dually wheels)and just replace the fronts when they wear out. I go through two sets of fronts per one set of rears. Plus I donā€™t like the edge wear on the rears, it also looks bad
    3
  2479. Sure did. I didnā€™t have to seal it
    3
  2480. Ā @davidbutton3500Ā  Elsa: Damage is widespread! https://youtu.be/DKu7rQoh4B8 Hurricane Elsa: Things are getting real! Look! https://youtu.be/dq29nBNnBoU
    3
  2481. Yes indeed. All the electronics are epoxy sealed, covered or protected. All connectors are weather pack connectors and do not allow water intrusion. You can't drive them into a lake or anything but a wash down is harmless.
    3
  2482. Ā @SuzukiKid400Ā  So I didn't want to get into a super long heated (pun intended) debate with the other fella. What I didn't mention in the video or in discussion, is that the the A/C condition only appeared after a few hours of highway driving and doing a restart. Refueling on a road trip was when it occured.
    3
  2483. Thanks Jason. I didn't know I could view disable history. šŸ‘šŸ‘ I'll remember you on my next A/C Diag!
    3
  2484. Yup. Incorrect coolant temp caused ECM to deny A/C operation.
    3
  2485. A wealthy one that doesn't care about depreciation
    3
  2486. LMAO!
    3
  2487. It was actually a decent part of it! Jeeps werenā€™t going to cut it and another dealership wouldnā€™t let me film at work.
    3
  2488. lol I should just to just do mobile work out of my trailer
    3
  2489. Thanks David! But only of YOU do the same. And if today sucks and can't be salvaged, just save it for tomorrow!
    3
  2490. No, we just didnā€™t make any money there
    3
  2491. Totally, I suck at my job
    3
  2492. It is forbidden! Prefilling the clean side (middle of filter) runs the risk of introducing contaminants that will go straight to the crankshaft bearings.
    3
  2493. There is a total capacity spec. But during service, there is always some left behind. Oil is still in the passages in the block, inside of the crankshaft and bearings, in the heads, and clinging to all the surface area. So total System capacity could be 7qt but Oil change spec could be only 5.5qt. Plus filter capacity can be different between brands and that can influence how much goes in. Also things like temperature and how long the drain plug was removed can affect how much needs to be added. Letting it drain for 30 minutes as opposed to five can greatly influence how much drips out. So if I were to do an oil change and the spec is 6 quarts or 8 quarts or whatever and then I just put that amount back in without re-checking thereā€™s a huge chance I could over or under fill so I prefer to underfill and then measure with the dipstick
    3
  2494. Thank you. Glad youā€™re here!
    3
  2495. Iā€™m in the NE right now and there are no like this up here. The rust is strong in WI
    3
  2496. Good morning to you!
    3
  2497. šŸ‘‹
    3
  2498. Canā€™t see me, windows tinted
    3
  2499. He owns the company that upfits police vehiclesā€¦ assumptions will get ya
    3
  2500. What I didn't say was I was also pumping some air through the hose, by the time we shut it down it was already going over the .6 I figured it best to leave that out, but ya got me, one way or the other the internet sees everything
    3
  2501. Youā€™d have to place the screwdriver tip on a strong magnet. I donā€™t know due how long, couple hours maybe. The magnet will temporarily magnetize the screwdriver. Iā€™m thinking way back to science class on this one šŸ˜‚
    3
  2502. Yes, many people seemed to have missed my caption at the beginning šŸ¤·ā€ā™‚ļø
    3
  2503. I sell BG stuff at my shop. So that's what I use when I make videos šŸ¤·ā€ā™‚ļø
    3
  2504. It crossed my mind a couple of times...maybe
    3
  2505. You cheated! LOL
    3
  2506. Ā @ckm-mkcĀ  heā€™s new here šŸ¤£
    3
  2507. Remain calm!!! šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚
    3
  2508. 12
    3
  2509. I donā€™t think soā€¦ Iā€™d consider it tampering
    3
  2510. Ā @dand3975Ā  Nooo my skin is thicker than that
    3
  2511. Ā @setoman1Ā  Wow that guy has been trolling here for a while. I think that's his truck.
    3
  2512. I rejected it swiftly after the video was shot. Liability all day. We actually took this video as evidence in case this guy was a predatory customer looking for a lawsuit.
    3
  2513. Youā€™re good my dude. No offense taken. I believe the engine has a slight tilt to the rear, Pegasus 1-2 degrees or so. I didnā€™t detect any kind of blockage in the block or heads. Any left over debris will be flushed out when I back flush everything after the intake is installed.
    3
  2514. For years šŸ˜! I commented on his page the other day to tell him that my professional vocabulary has been permanently altered due to the influence he has had on me!
    3
  2515. It wouldnā€™t be that difficult to make an access panel to remove them. But it would have to be designed that way from the beginning and Iā€™m sure itā€™s more cost effective to build the system with the part being difficult to access.
    3
  2516. It never had a hit in the past with the detector, and I personally installed the dye 6mo ago. This area was checked waaay back when, but no leak was detected with either method. It could have present and very small or it could be a new development.
    3
  2517. Thatā€™s accurate, the leak was so small that it held vacuum for for hours
    3
  2518. Put a pipe on it šŸ‘
    3
  2519. Theyā€™re working on a 90 too
    3
  2520. Home Depot commercial LEDs ā€¦$189.00 for 30000 lumens, and they run 120v or 240v
    3
  2521. Me? Nooooooo šŸ˜Ž
    3
  2522. Youā€™re in the right place
    3
  2523. Gravity hasnā€™t been proven either
    3
  2524. Yay!!!! šŸ˜
    3
  2525. Ā @jensjensen6954Ā  yea that was it šŸ˜‰. Exactly!
    3
  2526. Ok bye šŸ‘‹ šŸ˜‹
    3
  2527. Referring to the air filter
    3
  2528. These are summer tires šŸ¤£šŸ¤£
    3
  2529. I placed hardware and clean tools on it. Itā€™s cool my dude. No seats were harmed in the making of this video.
    3
  2530. šŸ¤£šŸ¤£ It was running! Maybe just kinda quiet, or the GoPro was filtering out the background noise
    3
  2531. It really just serves as a pivot point and it pumps up hydraulically with oil pressure to act as a lash adjuster. Lifter is the incorrect term.
    3
  2532. That wasnā€™t her, someone else šŸ˜‰
    3
  2533. Ā @victorsantamaria100Ā  Readā€¦ and thank you!!! šŸ™‚
    3
  2534. Afraid not. We really needed the tag number to prove it and we client get it from the footage
    3
  2535. Ā @CodycoWebĀ  So then why didnā€™t the purge valve have flow when commanded open?
    3
  2536. It can bud pressure if the vent is closed
    3
  2537. Yea thereā€™s a lot of drinking around those parts lol
    3
  2538. Thatā€™s not what I meant noooooooooo!!! šŸ¤£
    3
  2539. You missed the after hours comment
    3
  2540. Oh yea itā€™s fine
    3
  2541. I have a tax stamp for my non firearm just in case
    3
  2542. Itā€™s osha approved, canā€™t install projectiles unless I removed the tip
    3
  2543. Oh not it would be easy to get into a huge mess waving something like this around. Airsoft, paintball, this thing all fall into a category of ā€œtreat it like itā€™s realā€ Onlookers just donā€™t know and would immediately assume itā€™s real. I would.
    3
  2544. Foreshadowingā€¦ Iā€™m replacing timing parts and the oil pump soon.
    3
  2545. Naaaw you were first
    3
  2546. When itā€™s time
    3
  2547. I use dull ones with just enough force to get at good grip...ancient chinese secret
    3
  2548. Ā @Distinctly.AverageĀ  Fun fact, we can also turn left on red. But only if turning onto a one way road from a one way road.
    3
  2549. Yes we can turn right red here.
    3
  2550. Forewarning, I usually donā€™t do parody videos like this. Iā€™m kinda serious(ish) sometimes
    3
  2551. You beat Cliff and Aleks, hard to do!!!
    3
  2552. Iā€™ve decided to never grow up
    3
  2553. Alldataā€¦subscription based service to manufacture flow charts
    3
  2554. Thanks!
    3
  2555. Not necessarily. If I swapped the coils and the misfire remained in the saber place, then I would suspect a spark plug out perhaps a fuel injector. The purpose of moving the coil was to isolate the component.
    3
  2556. Itā€™s in a lift, the floor jack was there to keep it from rocking bc itā€™s huge
    3
  2557. Maybe they DID decide to change them after I presented the condition. And maybe itā€™s s fleet van, that Doesnā€™t machine rotors. Maybe I had this knowledge prior to filming, šŸ˜œ
    3
  2558. Itā€™s a fleet van. They donā€™t machine rotors.
    3
  2559. Ā @dt99022Ā  Right!!
    3
  2560. Been doin this a long time, I kinda know how tight a bolt should be. You develop a feel for torque over the years. I still use specs and wrenches on critical components like cylinder heads
    3
  2561. Wow I got here pretty early.
    3
  2562. Ā @markportnoy6290Ā  Me and some other guys are going to hang out with our guns. BAM! Now we fit your definition of militia (even tho what you say doesn't really matter)
    3
  2563. Fl checking in. We love Grady!!!!
    3
  2564. I can see the problem from the thumbnail. The wall isn't finished yet
    3
  2565. That's what I immediately assumed then they scheduled the appointment. I'm glad I inspected it before committing to a price/repair
    3
  2566. Dude.. What?
    3
  2567. Ā @lsswappedcessnaĀ  It'll be fine they said. Just install a larger fluid cooler and call it a tow package.
    3
  2568. Thanks šŸ‘ It was actually fairly low risk. The truck had been parked for a day in my lot, and nothing had reached operating temp. I never would have done that if everything was hot.
    3
  2569. Ā @amalfi460Ā  Iā€™m waiting for my customer to bring it back to diag the P0325. We ran out of time and he needed the truck back
    3
  2570. Itā€™s shouldnā€™t cause DTCs if all of the sensors are connected and the correct parts are used
    3
  2571. I saw it first tho šŸ˜ so he was first šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    3
  2572. It did! Edit: It started rage in me after smashing my leg a few times šŸ˜
    3
  2573. Canā€™t really sell it itā€™s got some bad juju. I hate to hand it over to someone else and then have it take them out so I think Iā€™ll keep it safe right where it is
    3
  2574. šŸ¤£šŸ¤£
    3
  2575. I was, they canā€™t fly over 400ft and apparently they can fly over peoples houses.
    3
  2576. It never even occurred to me to even look for things like that on a bill like this. Itā€™s assumed the builder would t be so careless. They tripped at the finish line
    3
  2577. Procedure says to use the tool to remove the followers, Iā€™m no 5.4 wizard so I thought it best to just follow the playbook. I suppose one could just unbolt the cams but with the chain of you run the risk of valve pressure spinning one of the cams and causing a valve to smack a piston. Then thereā€™s the issue of uneven pressure across the cam when trying to bolt out all back together.
    3
  2578. SryšŸ¤·ā€ā™‚ļø itā€™s Flu season
    3
  2579. Ā @bryanrulz3904Ā  itā€™s going to get worse when the video goes live
    3
  2580. What do you think Iā€™m doing here? šŸ˜‰ There are huge problems to fix, Iā€™ve got a few ideas
    3
  2581. April 1 fun my guy. The story was real, the laptop actually showed up at random. The call to my wife was legit and unplanned. Iā€™m now aware of who brought the bag. Think of it like a compound April fools joke.
    3
  2582. Ā @usaborn9894Ā  Wow you must be lucky to win 4 times šŸ¤£šŸ¤£šŸ¤£. šŸ–•those scammer people
    3
  2583. People saying that I cross threaded them šŸ¤£šŸ¤£
    3
  2584. Ty! Iā€™m on the mend this evening
    3
  2585. Click
    3
  2586. At least itā€™s a spicy one šŸ˜‰ Plus folks wanted to see some toolsā€¦two birds with one stone
    3
  2587. Ur Avatar still creeps me out šŸ¤£
    3
  2588. Iā€™ve never owed a tool truck. And this stuff was around wayyyy before I was on TY āœŒļø
    3
  2589. The comment seemed a little off, didnā€™t it?
    3
  2590. Yes when the machine recovers refrigerant some oil will be recovered with it that is measured in a catch bottle on the machine that same amount of oil gets reinstalled with an injection device
    3
  2591. Thatā€™s why I do it every time
    3
  2592. šŸ¤¦ā€ā™‚ļøšŸ¤¦ā€ā™‚ļøšŸ¤¦ā€ā™‚ļø
    3
  2593. Bc Iā€™ll need it after the storm
    3
  2594. Donā€™t forget to get some sleep šŸ˜‰
    3
  2595. Did that the first day in the office
    3
  2596. The thing is, there were many many people that said the exact same thing, it was enough to remember that ā€œI donā€™t know, what I donā€™t knowā€ and it was worth looking into
    3
  2597. No reeee just crickets
    3
  2598. Stay away from the retail tire stores, they usually have a poor work culture. Make a profile on indeed.com. Look for a private shop.
    3
  2599. I know everything is at all times
    3
  2600. As soon as theyā€™re blocked they come right back šŸ˜”
    3
  2601. Theyā€™ve gotten a few people this week šŸ˜ž
    3
  2602. Sry, errorā€¦ I fixed it
    3
  2603. Gotcha!!
    3
  2604. Ā @jamesspinks716Ā  yup the Evap temp sensor reads 127*f and the compressor isnā€™t cycling. Need to pull the dash and replace the evaporatorā€¦.declined for now šŸ¤·ā€ā™‚ļø
    3
  2605. They have paint specifically made for calipers to withstand the heat
    3
  2606. He owns an HVAC company
    3
  2607. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    3
  2608. I wanted to paint the bolts too, and didnā€™t want to scratch them with a tool
    3
  2609. Hello šŸ‘‹
    3
  2610. I had an extra light tapped into the circuit and it overloaded the switch
    3
  2611. Useful! Thank you!
    3
  2612. Easyā€¦ I need X PART to fix carā€¦ order partā€¦ give estimate to customerā€¦.wait for customer to approveā€¦part arrivesā€¦still waiting for approvalā€¦. Looking at part sittingā€¦still waiting on customerā€¦straight to voice mailā€¦.getting ready to leaveā€¦ customer approves, needs it today
    3
  2613. Thereā€™s a buddy shop on side of me and a guy who cuts granite on the other side. I try to work around it
    3
  2614. The majority of my wrenches are snap-on flank drive plus wrenches. They have grooves cut into the open ended face allowing the wrench to engage the fastener away from the tip and on the flank of the driven nut. Because of this they achieve an incredible amount of gripping force on almost any fastener. I just didnā€™t feel the need to dig out line wrenches for this particular job.
    3
  2615. They still have good sandwiches
    3
  2616. Thanks for the advice! Have a great day!
    3
  2617. no good this time. they were really in there
    3
  2618. Only repacked the fronts. But didnā€™t want rears done till he replaced the bearings on that axle. The trailer parts store only had two sets. They did get fresh grease pumped in through the axle fitting.
    3
  2619. To me this is worth the effort and funds. This truck is purpose built to fit my needs. Iā€™m not interested in buying a new one and I canā€™t just run this one into the ground. So Iā€™m effectively building a new truck rather than buying one. At the end this one will be more capable than any replacement could ever be!
    3
  2620. The crazy part about my Florida Man potential based on this comment, is to consider that I'm a transplant Floridian, and have become assimilated and naturalized by the Florida man culture and legacy. Home Grown Florida Man is capable of much greater things than what was witnessed here today!
    3
  2621. Save your pity. I fled the rust belt long ago
    3
  2622. It was more ā˜ ļø
    3
  2623. Itā€™s a pretty pig šŸ–
    3
  2624. I managed to get the rf out without šŸ¤·ā€ā™‚ļø
    3
  2625. You sent me the red cans right?
    3
  2626. Yes theyā€™re extra angry at me today. Must be a middle of the week thing
    3
  2627. Lol yea you did, I overlooked them at the moment if unboxing
    3
  2628. I misspoke
    3
  2629. 4.5 milesā€¦about $1000
    3
  2630. lol I wish! This is a solo operation. Iā€™ve got to use multitasking skills here! šŸ˜Ž
    3
  2631. Itā€™s coming along. Been busy with summer time for past couple of weeks so I havenā€™t spent much time on the project recently.
    3
  2632. Iā€™ll pressure wash your engine
    3
  2633. He was first
    3
  2634. I know, we got to the bottom of it fast this time
    3
  2635. People are reasonable and expect to get it fixed, otherwise the car wouldnā€™t be here. It was necessary to get the thing running to make sure there wasnā€™t something major going on. And if the ā€œI DiDnT AuRtORIzEā€ card gets pulled and we go full-on-petty, I can always take my sensor back and they can drive away.
    3
  2636. Glad you like them! šŸ«‚
    3
  2637. This right here is what Iā€™m talking aboutā€¦.video had NOTHING to do with MAGA, Communism, Democracy, Republic, freedom or control, racism or inclusion etcā€¦ all of this polarizing nonsense ripping us apart at our core. Yet you feel compelled to complicate the discussion. Stop it.
    3
  2638. Yes those ones
    3
  2639. I didnā€™t even Reeeeeeealize that I said diameter lol šŸ˜‚šŸ˜‚šŸ˜‚
    3
  2640. I heard he was here!
    3
  2641. Iā€™ve given up the lighter method since then. Got myself an Amazon heat gun
    3
  2642. It's all good. I'm prepped and just hanging out right now. I have everyone at my place for the hurricane party (This is the way)
    3
  2643. I let everything down ā¬‡ļø šŸ™ƒ
    3
  2644. You missed the good part
    3
  2645. Thereā€™s more to appreciate from the situation than how many minutes of footage was recorded
    3
  2646. Captain buzzkill over here šŸ‘ˆ
    3
  2647. Itā€™s ClichĆ© but Iā€™ll say itā€¦Gā€™Day Mate!
    3
  2648. Oh yea those things are great. Much more controllable than a pneumatic gun and theyā€™re fast and efficient. They donā€™t come cheap. Mine are Snap on ratchets and if I recall, they were near $500 each. Well worth it. They pay for themselves.
    3
  2649. Thereā€™s a connector in the radiator and it has an o ring inside those fittings. I wouldnā€™t suggest trying to get them out itā€™s extremely difficult to get new ones in. I believe the fittings can be changed and already have the seals installed.
    3
  2650. I might the day off to recover, itā€™s been a rough week!
    3
  2651. We should build a TX/FL causeway through the gulf! Imaging the fishing and commerce opportunity!
    3
  2652. Very true!
    3
  2653. 14-18 is the ballpark on this job. This particular one billed at 15 and some change
    3
  2654. SRY had some personal things for the past couple of days
    3
  2655. I actually like model trainsā€¦ it ws just what popped into my head in the moment šŸ¤£
    3
  2656. Itā€™s your thermostat stuck open? It could be over cooling due to too much flow. If itā€™s ridiculously cold outside you could try blocking half of the radiator on the front side with cardboard . I used to do that when I lived up north
    2
  2657. Is skip around to Save video time
    2
  2658. Ooohh no
    2
  2659. New ones are on the new coils
    2
  2660. Theyā€™re ok with it. I have a few privacy and disclosure conditions but nothing major. My efficiency of production does not suffer and they view it as a good thing because I have video documentation of my work.I have been in a courtroom before and documentation saves the day every time. The shop fully accessible to the public therefore there is no reasonable expectation of privacy regarding my footage.I saw the last video from Custer States What. I feel for him. Maybe heā€™ll get a new job
    2
  2661. Emissions mandates
    2
  2662. Timing chains call for 17hr labor. Iā€™m in it for 2.5 right now
    2
  2663. Maybe you should hold it for me
    2
  2664. The sticker if itā€™s the original.
    2
  2665. Ā @bearing_aficionadoĀ  found it at Home Depot by the ladders
    2
  2666. Ā @SnuffululupicusĀ  There are many variations of RTV. Overall Iā€™ve never had issues with Permatex black or grey. However they come as specialized formulas for specific purposes like differential covers or high temp applications. Iā€™m against the blue and orange bc itā€™s the cheapest thing on the shelf. Itā€™s not great at any one thing and is moderate at many things. Like wd40. It does an ok job across multiple applications yet itā€™s never the best any one thing .
    2
  2667. No history at all, and yes the little bend is common
    2
  2668. The heat and the direct sun does it.
    2
  2669. Yes
    2
  2670. Nope!
    2
  2671. Who says I didnā€™t know šŸ˜ˆ
    2
  2672. It was brake cleaned before welding
    2
  2673. In the closet
    2
  2674. Creepy how much the AI knows about it isnā€™t it?
    2
  2675. That scribble means nothing to me
    2
  2676. Sure, but I donā€™t want to šŸ¤£šŸ¤™
    2
  2677. Soon
    2
  2678. It was even worse having to do it
    2
  2679. Just over 4 hours I think. I beat the book time of 5.5 hr
    2
  2680. Costco
    2
  2681. Ā @shanemccreeryĀ  I would and that takes forever for YT too follow up.
    2
  2682. Itā€™s ok to have background music but the YT algorithm canā€™t recognize that. It canā€™t differentiate between background music deliberate use of the music šŸ¤·ā€ā™‚ļø
    2
  2683. Ā @21PiloteerĀ  I know
    2
  2684. Depends on where youā€™re standing. If I were in the rust belt, everything would be getting rust treatment
    2
  2685. Exactlyā€¦thereā€™s a lot of editing here to trim the fat
    2
  2686. I was first
    2
  2687. šŸ¤£
    2
  2688. No gasoline injectors are kids toys compared to a diesel. Gasoline runs 45-65 psi and the diesel injectors run 10,000-30,000 psi
    2
  2689. šŸ¤®
    2
  2690. I want some 30 over S&S units
    2
  2691. Yes indeed, but I donā€™t have an issue with installing a set of their units temporarily just to test them out and analyze their products.
    2
  2692. I think I had too much and I was going into full cornholio status!
    2
  2693. you need a new boss
    2
  2694. Mooore coffee!
    2
  2695. Just a menu section on the screen
    2
  2696. I heard about that. Pissing off the French is how revolutions are started.
    2
  2697. Thermometers and flash lights
    2
  2698. I dunno why there are no captions, Iā€™ll look into it
    2
  2699. Hello there!
    2
  2700. Well I needed to get the area clean. Plus I did another polish after it sat overnight, nothing wrong with two coats of wax
    2
  2701. It's a Mothers (Brand Name) headlight kit
    2
  2702. I don't even own a corded drill anymore, I'm in that new age of power tools lol
    2
  2703. Ā @meatballmagoo6134Ā  I just make YT videos šŸ¤·ā€ā™‚ļø
    2
  2704. Flat charge per job have to be fair
    2
  2705. Surprised me as well. I donā€™t see why it needs that much
    2
  2706. Iā€™ve never tied it but have seen the adapters and vids of folks doing it
    2
  2707. Easy hot rod, Iā€™m. Not caught up just yetā€¦
    2
  2708. Just camera
    2
  2709. Address in the About tab on YT home page
    2
  2710. 6-10
    2
  2711. I think I can fit them in a trailer if need be
    2
  2712. Doing that tomorrow
    2
  2713. šŸ§ I believe youā€™ve mistakenly assumed my motivations.
    2
  2714. Itā€™s actually close. I have one at home šŸ˜‰
    2
  2715. Iā€™ll decline. Itā€™s not your bill to pay šŸ˜
    2
  2716. Theyā€™re doing some kind of work on that corner and the guys park there
    2
  2717. Those are for the parking brake
    2
  2718. TY is sticking them in where they shouldnā€™t be. Itā€™s annoying. I ended up buying YT premium to make it stop. Cancelled Netflix to meet the entertainment budget and havenā€™t had cable TV in 15 years. I feel like Iā€™m winning šŸ˜‚
    2
  2719. I havenā€™t done one of these coolers in six months šŸ¤·ā€ā™‚ļø
    2
  2720. My shop is doing well, I donā€™t have to sell T shirts and hats. Folks requested such things and the recommended print shops were selling garbage. So we started making our own. Just filling market demand here
    2
  2721. Itā€™s ok, weā€™re looking for some performance brakes for it, we can change the plates with non rusted ones later.
    2
  2722. No we didnā€™t leave, I took all my stuff to my house. Iā€™m in it as I type this.
    2
  2723. No
    2
  2724. I do not! What happened??
    2
  2725. $20,000
    2
  2726. I actually made a whole video about that just for this comment on the other video. And the short answer is no. corporate will not make you perform services and corporate does not dictate whether services are mandatory or not.
    2
  2727. Well we donā€™t want to soak the nator but a little water wonā€™t hurt it. There are engines that have the alternator on the bottom and they get splashed all the time with road water
    2
  2728. This video is actually from the future šŸ¤£šŸ¤£šŸ¤£
    2
  2729. It changes injector pulse and adds fuel, full throttle often cuts fuel off the engine isnā€™t running yet, itā€™s called ā€œclear floodā€ mode
    2
  2730. Weā€™re past that I think
    2
  2731. Cost
    2
  2732. I realize that the OEMs and the consumers have vastly different goals thatā€™s the reason for ā€œwhy did they do thisā€
    2
  2733. RainmanAppontments @ gmail (office email)
    2
  2734. Itā€™s all good. Final checks before being released into the wild.
    2
  2735. The oil leak made the wire insulation soft and it came apart over time
    2
  2736. Ya part three is published good sir
    2
  2737. Yes that guy just wants to be angry, I feel bad for him. I looked at his google review history and all he does is run his mouth about establishments. Class act
    2
  2738. I got my wires crossed (pun intended) and misread the diagram. IAC was not on the circuit
    2
  2739. If I drain the pan first, then drop the filter, it makes a HUGE splash
    2
  2740. Due to the nature of censorship I have to say what I want to say without actually saying it. We all know the what the problem is
    2
  2741. Sarasota, in the gulf coast, south of Tampa
    2
  2742. And thank you for being here!
    2
  2743. Itā€™s not sadšŸ¤£šŸ¤£ we have the šŸ€ āš½ļø s
    2
  2744. Ā @CajunReaper95Ā  Itā€™s insane, the tribalism is making people mental
    2
  2745. Ā @darrylhowe1465Ā  why? Censor myself bc of the opinions of others?
    2
  2746. Ā @turnthepage87Ā  HUH? What did I do??
    2
  2747. Ā @jasonplatco7881Ā Yea that was a bold move that resulted in a lot of blowback. However one should appreciate effort for speaking in the oppositionā€™s territory.
    2
  2748. Hahahaha ā€¦. I never said it was my Miata
    2
  2749. She's going to replace her own brakes on her van later
    2
  2750. Now I need to order the big connectors and redo one end of the cables. Fantastic idea
    2
  2751. Itā€™s all about the additive package
    2
  2752. But Iā€™m wearing the minimum amount of flair alreadyā€¦. If you want 30 pcs make the minimum 30pcs
    2
  2753. I'll do it in time lapse next time
    2
  2754. no we're not in cahoots or anything
    2
  2755. It does...extends the sift points and has a trans brake feature
    2
  2756. I'll explain it later, but I actually sold the building, kept the land
    2
  2757. 8888
    2
  2758. nope
    2
  2759. HAHAHA his name isn't SUN
    2
  2760. šŸ¤£
    2
  2761. I lived in Monroe once, I know the pain šŸ˜
    2
  2762. There's a running joke going on with @southmainauto regarding the click bait titles
    2
  2763. Yupper
    2
  2764. I thinks its turning into a running joke now
    2
  2765. I like to to troll you guys sometimesā€¦.I have an idea šŸ˜ˆ
    2
  2766. I can recalibrate them with the scanner when Iā€™m done
    2
  2767. New ones cost 92K, I'm good with a $1500 interior restoration, I'll be 3K if I decide to have the seats reupholstered
    2
  2768. 2024 Silverado dually has an MSRP of 92k
    2
  2769. I donā€™t like using the frame and body, I learned to avoid it from installing car audio.
    2
  2770. Itā€™s a delicate balance
    2
  2771. šŸ¤«
    2
  2772. He left a couple of months ago, on to other things
    2
  2773. Sarasota Fl
    2
  2774. Did you guys ever get the van checked for that programming update?
    2
  2775. Your profile pic creeps me out...I just need to get that out there
    2
  2776. We have two steering wheel locks, I don't use them. I know the part that you're referring to. When I got back into the truck the SW was off to the right. (I moved the actual wheels to align the pins in the turnplates) And yes parrot jaw pliers, wrenches slip off of tie rods
    2
  2777. I didnā€™t put that kind of pry against themā€¦Weā€™re good šŸ‘
    2
  2778. The last one was a hybrid
    2
  2779. Challenge accepted
    2
  2780. BTW I just checked where Google placed ads, theyā€™re about 8-10/15 minutes in separation, theyā€™re usually placed at 5-6 minute intervals, so this video has less ad space than the normal/shorter videos.
    2
  2781. I know, Google has been doing to changes. Itā€™ll calm down again
    2
  2782. Got it! šŸ˜‰
    2
  2783. Ā @clbcl5Ā  Ok ā€œReeeeeā€ is a verbally spoken mockery of when a commenter goes on the offensive about how everything is wrong and bla bla bla. So I mock that situation with Reeeeee! Kind of like Charlie Browns mother
    2
  2784. Both main seals are leaking
    2
  2785. There are impounded cars in the lot, cant have it accessible to the public.
    2
  2786. Kids these days šŸ¤·ā€ā™‚ļø
    2
  2787. NOCO battery protectant and cleaner (2 different cans)
    2
  2788. Moderately
    2
  2789. I think you did
    2
  2790. We tried that couldnā€™t find the leak that way and even if it did leak there was no way we couldā€™ve seen where it was coming from
    2
  2791. Itā€™s the circle of life
    2
  2792. Not very, much quieter than a pneumatic tool
    2
  2793. Just brake parts cleaner.
    2
  2794. šŸ¤£šŸ¤£šŸ¤£šŸ‘
    2
  2795. šŸ˜³
    2
  2796. Negative
    2
  2797. šŸ¤£šŸ¤£šŸ¤£ theyā€™ll shoot back in that neighborhood
    2
  2798. šŸ¤£šŸ¤£
    2
  2799. Hi
    2
  2800. Thanks for your help
    2
  2801. It did. Videos were shot at the same time, this one ended up on the back burner for a couple of extra days. Youā€™re very observant šŸ‘
    2
  2802. šŸ¤£šŸ¤£šŸ˜±
    2
  2803. Did you notice how it auto corrected to all caps when I typed Skynet?
    2
  2804. were trying to source the OE bolt for later, it will be fine short term I think.
    2
  2805. Lexus vs Lexi
    2
  2806. Iā€™m happy with it.
    2
  2807. Needs engine. We have a donor Miata
    2
  2808. Whatā€™s makes you say that?
    2
  2809. They must have neglected their fuel filters. Oh, and thereā€™s that DPF system thatā€™ll do it every time.
    2
  2810. Bobcat embarrassed me, I can run a Deere much betterā€¦ I swear šŸ˜‡
    2
  2811. Glad youā€™re here! šŸ˜
    2
  2812. 18 hours straight!
    2
  2813. Ā @jefferybye2169Ā  Hahaha, thats cute. You have your work cut out for you. Youā€™ve only ever commented on the SEMA videos, so in order to know what youā€™re talking about, you should probably go back and watch the past year worth of content. Iā€™ll wait. While youā€™re here trolling, we can work on your sentence structure and spelling. Iā€™ll also let you in on a little secret, doesnā€™t matter if you give me a šŸ‘or šŸ‘Ž those interactions by you the viewer, along with your comments tells YouTube that Iā€™m doing a good job. So far Iā€™ve counted at least 8 interactions that you have had with my video pages. This expands my reach. If you want to hurt me, the only thing that you can do is go away. Edit: I realize that itā€™s quite possible that youā€™ve been around longer. Perhaps you donā€™t comment or Iā€™ve never noticed your comments. (I hope to find more, I like this game) Regardless, thanks for watching, and have a great day. šŸ˜‰
    2
  2814. Iā€™m saving the jokes for when I get back to my regular format. šŸ˜Ž
    2
  2815. It looks pretty and draws a crowd. šŸ¤·ā€ā™‚ļø
    2
  2816. Like Elenor! 1967 Shelby GT500ā€¦go baby go!
    2
  2817. Hellooooo
    2
  2818. I were 1st
    2
  2819. Gā€™day
    2
  2820. Good morning
    2
  2821. Better than spending 40-100k on another one šŸ¤·ā€ā™‚ļø
    2
  2822. šŸ¤£šŸ¤£šŸ¤£
    2
  2823. Hahahah, Iā€™ll do all that on monday
    2
  2824. Iā€™ll block you šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  2825. Donā€™t jinx me
    2
  2826. But then you wonā€™t have have anything to watch
    2
  2827. Yea you know I was doing šŸ¤£šŸ¤£
    2
  2828. Weā€™re considering moving them (the lift) and I donā€™t want to waste the sticker just yet šŸ™ƒ
    2
  2829. Brushless motors!
    2
  2830. Iā€™m not allowed to ask for thatā€¦ but you are! šŸ˜‰
    2
  2831. No Iā€™m just anal like that šŸ˜‰
    2
  2832. lol i wish I were still in my 20s šŸ˜‚šŸ˜‚šŸ˜‚
    2
  2833. Thanks my man! Iā€™m going back in soon to do it again. Its just not 100% yet. After this, it got me thinking about how it used to perform, and I think itā€™s still very inefficient.
    2
  2834. Itā€™s been Unlisted. The background music kept getting flagged for copyright and a had loads of post editing, editing to do
    2
  2835. Sure I can
    2
  2836. Thank you so much!!
    2
  2837. Kevin thatā€™s you so much for helping out! We really appreciate you! šŸ˜Š
    2
  2838. Ā @user-uu9ru3de1yĀ  reeeeeedid
    2
  2839. šŸ¤£
    2
  2840. 2.2 4 banger
    2
  2841. šŸ¤£šŸ¤£
    2
  2842. No it doesnā€™t fit, I thought about it tho
    2
  2843. Thatā€™s what Iā€™m thinking, fiberglass tub, problem solved
    2
  2844. Yea I know, but I had to do what I had to do.
    2
  2845. I agree with you on the doorman stuff. But I wanted it fixed that day. I know Iā€™ll probably be doing it again.
    2
  2846. šŸ‘‹Hi. Iā€™ve noticed that YouTube has been scrutinizing my videos more then before. Iā€™ll just have to turn the radio down. Iā€™m not so certain about the Jeep place looking forward. We seem to be closed randomly or working partial days all of a sudden. We shall see I suppose, time will tell.
    2
  2847. Brake fluid doesnā€™t get topped off because itā€™s designed to fall low in the reservoir as the brake pads wear, fluid is displaced from the master cylinder to the calipers. Most transmissions no longer have a dipstick and are considered ā€œsealedā€ there is a procedure for setting the fluid level but it takes time. I donā€™t open radiators if itā€™s hot because of burns, and PS systems donā€™t lose fluid unless itā€™s leaking. So in short, topping off fluids canā€™t easily be done out shouldnā€™t be done unless a repair is made. Itā€™s not a thing anymore and it also can a liability. Letā€™s say a brake master cylinder has a leak and the fluid is accumulating inside of the brake booster. If my shop continuously tops off brake fluid, then the low fluid warning will never turn on, at some point there will be so much brake fluid in the booster that the driver can no longer press the brake pedal. Letā€™s say this causes an accident who responsible for that?
    2
  2848. Gotcha!!! šŸ¤£šŸ¤£šŸ¤£
    2
  2849. Cmon it was a joke, the didnā€™t drive all the way down here just for a LOF. But they were in town and visited us.
    2
  2850. Just a little šŸ˜
    2
  2851. Not unless they want them
    2
  2852. Snap On stuff, lifetime warranty of I manage to break it šŸ˜Ž
    2
  2853. I screwed upā€¦fixed it
    2
  2854. šŸ˜‚gotcha! (There was some language background)
    2
  2855. Remember ā€œWayneā€™s World?ā€
    2
  2856. Yay!
    2
  2857. New pads are thicker so I have to press the pistons in to fit the new pads
    2
  2858. Test EVERYTHING! šŸ¤£
    2
  2859. Collapsed hoses or a brake booster that is full of brake fluid from a master cylinder leak can cause it. If itā€™s a GM truck, pull the brake master off of the booster (you donā€™t have to remove the hydraulic lines)and look inside for a bunch of fluid
    2
  2860. šŸ¤£šŸ¤£šŸ¤£
    2
  2861. Go to my YouTube page, itā€™s under the ā€œAboutā€ tab
    2
  2862. So weā€™re not under distress?? Have you looked at the current state of affairs around here? Weā€™re so upside down, nobody knows whatā€™s going on.
    2
  2863. Nononononono it wasnā€™t me! Theyā€™ve been there since before I bought itā€¦. But everything is working right now, so Iā€™m not messing with it.
    2
  2864. Scheduling
    2
  2865. Yes indeed!
    2
  2866. We shall get there!
    2
  2867. Iā€™m a comment generator šŸ˜‰
    2
  2868. I must have ordered it wrong I think
    2
  2869. Itā€™s was perfect, mixed with the oem paint code šŸ¤”
    2
  2870. It's at the top of the list. I've seen enough testing to prove it to me. BG oils are in the same realm
    2
  2871. Florida UV
    2
  2872. All the time! I love a good pre purchase inspection, or checkup.
    2
  2873. Iā€™m not a morning person
    2
  2874. When the grease leaks out, the joint inside wears and becomes loose. The clicking noise is from the joint binding. Things like ball joints, bearings or tie rods wonā€™t make noises like that (usually) unless theyā€™re so worn theyā€™re falling out
    2
  2875. Absolutely
    2
  2876. I am mocking the torque wrench trolls who think every single fastener needs a torque wrench
    2
  2877. I didnā€™t change any emissions equipment
    2
  2878. its not a no no/ Troy left us a few months ago. He has other priorities right
    2
  2879. Yea Iā€™m no welder
    2
  2880. Ā @FollowingtheCliffNotesĀ  šŸ¤£
    2
  2881. Did I call you back?
    2
  2882. Time to disable 4cly mode.
    2
  2883. Troy quit about two months ago, heā€™s on to other things
    2
  2884. I have the kits, haven used them yet tho
    2
  2885. Ā @dans_Learning_CurveĀ  šŸ»
    2
  2886. Ā @warpedphreakĀ  ahhh youā€™ve noticed.. how am I doing?
    2
  2887. Yesss
    2
  2888. šŸ˜‚šŸ¤£
    2
  2889. šŸ˜
    2
  2890. Iā€™m sorry Iā€™m not really going to use superglue I said no sleep and jet lag šŸ¤£šŸ¤£ Dont use super glue!
    2
  2891. I left that one to yā€™all šŸ™ƒ
    2
  2892. Seriously
    2
  2893. Waiters can wait at home
    2
  2894. I know this šŸ™ƒ But I can dream canā€™t I?
    2
  2895. You should know I donā€™t talk about money
    2
  2896. Hahahah
    2
  2897. Yā€™all are slick
    2
  2898. I really donā€™t know when it happened. I woke up yesterday and it was just kind of stiff and in certain ranges of motion I feel bit of pain. I think I sprained it somehow but I donā€™t know when it happened.
    2
  2899. Iā€™m on the up and ups, thanks. Still a bit foggy in the head
    2
  2900. I agree! šŸ˜šŸ‘‹
    2
  2901. Did itā€™s got like 500gb or something crazy
    2
  2902. There was no cleaning that back to anything. The cables needed remade
    2
  2903. I nooo eat aspartame
    2
  2904. Makes up for that one time you were late! šŸ¤£šŸ¤£šŸ«”
    2
  2905. Yes Indeed!
    2
  2906. Look, the auto type corrects skynet to SKYNET (defaults to all caps) It has become self aware
    2
  2907. Censored by the AI ā€¦.SKYNET is real
    2
  2908. Who are you to come in here and run your mouth like that? I can change whatever I want. Not that you NEED to know, but the title wasnā€™t doing very well so I changed it. I donā€™t mean to be an ass, just matching your energy in this one.
    2
  2909. Itā€™s a new feature, I just found it two days ago
    2
  2910. Itā€™s defiantly not for rock crawling! One little dent and itā€™s toast.
    2
  2911. I believe that is due to the camera lenses causing a fisheye affect
    2
  2912. Itā€™s been a week of potty training and behavioral training. They learn fast and are already loyal and semi obedient. Theyā€™re a total win as far as dogs go imo
    2
  2913. Broke it 3 times in 250k
    2
  2914. Dad joke!!! šŸ’Ŗ
    2
  2915. Cā€™mon man! You know deep down itā€™s not his fault. He hasnā€™t been president for at least 3.9895 years! I should take you behind the gym for saying something like that.
    2
  2916. PB blaster and BG enforce. (PB blaster is available retail and a yellow can, and BG products are harder to get but can be found on eBay and Amazon
    2
  2917. Wiper blades
    2
  2918. Transmission (Allison 1000) has two filters, internal and external
    2
  2919. WTFā€¦ HOW???? Iā€™m impressed
    2
  2920. Its fresh
    2
  2921. Ā @thesushifiendĀ I didā€¦still wonā€™t make 50* air at a stop light when itā€™s in the upper 90s*. Needs evaporator
    2
  2922. Ā @FredD63Ā  oh I forgot, you can get the 4l80 trans with the lq4 if it came out of a van or 2500 2500 truck. Itā€™s much stronger than the 4l60
    2
  2923. Get a 6.0 LQ9 or and Lq4 The LQ9 was the highest output
    2
  2924. Ā @jackalope9001Ā  why not? What kind of customer are you?
    2
  2925. Yea you tell em!!!!! šŸ«”
    2
  2926. It didnā€™t work, off camera or cut scene I tried it. Yā€™all saw 2-3 attempts reality was around 10 fitment attempts
    2
  2927. Ā @hoseqt1Ā  I had to remove the linkage from the old carb, to grind out the hole, to fit the linkage onto the new carb. I tried to take the butterflies off first in order to remove the shaft from the carburetor to make it easier to work on bc I still needed to remove the linkage from the shaft. That didnā€™t work so I shoved the shaft out with an air hammer. After that I found out all those tabs on the old linkage causing interference and binding so I had to cut those off too. And NO I wasnā€™t just going to start grinding away at the shaft first. (As an attempt to disassemble without wrecking the old unit, as we can see, that didnā€™t work out) I also figured that the instructions referred to grinding away the tabs on the levers, not so much the shaft.
    2
  2928. But they wanted the Weber šŸ¤·ā€ā™‚ļø
    2
  2929. #brakecleanmafia šŸ¤£
    2
  2930. Nope šŸ¤£
    2
  2931. Nope
    2
  2932. Doubt it, itā€™s only 300 lbs extra itā€™s just wear due to mileage
    2
  2933. Ā Ye Old GeezerĀ  šŸ¤£ you guys are weird
    2
  2934. Hahahahahhaha šŸ˜‚šŸ˜‚šŸ˜‚
    2
  2935. Seriously?
    2
  2936. Ā @grahamcockerill2406Ā  negative, thatā€™s guess other truck (there were two) The silver one is mine, but I donā€™t really do towing, itā€™s for other things
    2
  2937. Reason being, in a nutshell & IMO, it adds to the calculated cost of ownership.
    2
  2938. Sealed system basically says ā€œwe took away the dipstickā€ Yes it can be done, itā€™s a similar procedure. The manufactures donā€™t talk about this type of maintenance.
    2
  2939. šŸ’Æ
    2
  2940. No no no I'm fine and the shops fine, what I meant is that this kind of job is one that is a loser, it takes to much time to be profitable. I could have done three other things in the amount of time this one took up. It happens
    2
  2941. Batteries DEClINED
    2
  2942. He has impacted the basic function of my brain
    2
  2943. Glad you enjoyed it
    2
  2944. šŸ¤£šŸ¤£šŸ¤£
    2
  2945. It comes in through the lower intake gaskets, itā€™s not a head gasket problem
    2
  2946. Bc the AI wants vids Las than 1 minute and thatā€™s BS. YT is NOT TikTok
    2
  2947. I killed him
    2
  2948. Ok okā€¦ not going to narrate the transmission install šŸ˜‰
    2
  2949. I need a day off sometimes šŸ˜‰
    2
  2950. Turn your speakers down šŸ¤·ā€ā™‚ļø
    2
  2951. Ā @jameslastname9171Ā šŸ¤£šŸ¤£
    2
  2952. Your comment counteracts the down vote so now we are net neutral
    2
  2953. Real estate is a huge problem right now. Iā€™m finding buildings that are too small or too large. Itā€™s frustrating
    2
  2954. Location location location. My other one is out in the sticks
    2
  2955. Ā @bizbot1655Ā  thank youšŸ˜
    2
  2956. Ā @bizbot1655Ā  Indeed i do
    2
  2957. FACTS!
    2
  2958. Oohhhh šŸ˜³
    2
  2959. Arenā€™t we all!!?
    2
  2960. Yea I did. This particular job needed the green needle pliers too. (Close quarters combat)
    2
  2961. Iā€™m working on thatā€¦..
    2
  2962. I saw that one...shame
    2
  2963. You changed your pic and I didnā€™t recognize you
    2
  2964. Impact with a limiting stick (the orange thing) Then bring it up to final with a click wrench
    2
  2965. You've missed quite a bit since you've been gone
    2
  2966. Yes, good click wrenches are NOT cheap
    2
  2967. I confess!
    2
  2968. šŸ¤™šŸ˜
    2
  2969. So true
    2
  2970. There a delicate balance so-to-speak of what people want vs what they are willing to pay for. Bottom line is the truck needs a torque converter or trans work, but our guy wants to pay for cheap maintenance to ā€œsee if that helpsā€
    2
  2971. Yesā€¦wal mart
    2
  2972. Yesterdays vid was an hour
    2
  2973. Yes itā€™s actually designed like that! I couldnā€™t believe it either
    2
  2974. These condensers are made in Juarez Mexico. I remember what it was like before NAFTA. The state of affairs is a disgrace.
    2
  2975. Yea I threw a fit over this. I know GM has been slipping lately but this is 100% crap garbage. This is what we get when we source our parts from certain countries....like all of the ones who work for pennies. But hey profits right?
    2
  2976. Perhapsā€¦ But consider thisā€¦how about the overall strength of the part? Consider thatā€™s itā€™s going to be loaded and pulling a trailer. There are tremendous internal forces happening here because both wheel bearings are housed within the hub. It no longer meets structural standards due to the damage.
    2
  2977. lol I just noticed that and came here to edit! Thx šŸ¤£
    2
  2978. šŸ¤£ my dude I got that from eBay. Kmart been closed for years around here. I hear thereā€™s still some in Australia tho
    2
  2979. Theyā€™re no match for me!!!
    2
  2980. I hear that Australia has some
    2
  2981. Love that movie. RIP Burt Reynolds
    2
  2982. I donā€™t think he had the thing lit
    2
  2983. Heā€™s been really quiet for the past few weeks šŸ¤·ā€ā™‚ļø
    2
  2984. Flashlights are streamlight stingers. And the flood lights are made my Astro tools. They have many different lights. All use rechargeable batteries and the Astro lights recharge wirelessly
    2
  2985. I probably shouldnā€™t. Talking about money can only open the door for angry people. I choose to deny them that.
    2
  2986. Heā€™s been really quiet for the past couple of weeks šŸ¤·ā€ā™‚ļø
    2
  2987. šŸ¤£
    2
  2988. šŸ‘‹
    2
  2989. Ā @ZeroTRKĀ  no I managed to get my hands in there, wouldnā€™t budge, plus I think the probe was longer than the suave between the cute and the case wall
    2
  2990. It wasā€¦. reeeeeee!!!šŸ¤£
    2
  2991. šŸ‘šŸ‘šŸ‘
    2
  2992. We can get a good deal on shipping
    2
  2993. My Tahoe
    2
  2994. You're close
    2
  2995. Not yet...what do that do?
    2
  2996. šŸ˜ˆ I know
    2
  2997. Ā @clbcl5Ā  ā€œYou never have time unless you take timeā€ I will take the time and Iā€™ll do it tomorrow! Priority for me!
    2
  2998. Better than Chineseium stamped steel plates IG
    2
  2999. yea, YT isn't updating the title, making me look illiterate šŸ˜ 
    2
  3000. Itā€™s made for OTR trucks and Hot Shot haulers who are running 3-6000 miles per week. Canā€™t always get an oil change with a load and a trailer while in the middle of BFE
    2
  3001. There are more of us out there than you realize
    2
  3002. šŸšØšŸšØChallenge Accepted! šŸšØšŸšØ
    2
  3003. No disrespect taken. He's aware of the rust and fortunately , it's a part time farm truck that doesn't spend much time (if any) on the highway or towing. It's structurally sound (except for those cab mounts) and it can still be operated, so it has to be able to stop. My advice is to spend as little money as possible on it and work it till it's no longer cost effective.
    2
  3004. That's the solid hanger/mount for the spring and is the correct lift point for this truck. And your right, NEVER lift by the springs.
    2
  3005. I know that silly šŸ¤Ŗ
    2
  3006. Happens all day, welcome back!
    2
  3007. 650 is fine LOL
    2
  3008. You have a huge backyard!! LA is massive
    2
  3009. Ooh no I was a fanboy that day šŸ˜
    2
  3010. Yes but I didnā€™t want to out it back together to move the car out. Itā€™s being towed to scrap and we needed the suspension on.
    2
  3011. They did give me free T shirts and hats šŸ˜
    2
  3012. I had cleared the codes. The complaint derated the three gauge was inoperable but worked. I drive the truck later in the day and found that it would bounce around and randomly drop out.
    2
  3013. I do get copyright claim sometimes. The YouTube algorithm will let me know if some thing is copyrighted before I post it. Usually I can get around it just because of my voice overs and by breaking up parts of a scene so the music is not complete.
    2
  3014. It calls for 2.6 hr i think, and yes it does. Cant reach behind there to get the sensor, I tried, couldn't do it.
    2
  3015. Theyā€™re not even overlords, they treat us like people here!!!
    2
  3016. Hahahaha
    2
  3017. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    2
  3018. Those codes were circuit performance codes. The ECM can only monitor voltage that itā€™s sending out an voltage that is receiving back. The codes indicate there is a problem with that system but not necessarily that specific component. Yes those codes could mean thereā€™s a bad sensor but it could also Because to buy a faulty ground or a short in one of the wires. Trouble codes donā€™t tell us what part is broken it just tells us what system is affected.
    2
  3019. Yea I know. Heā€™ll be contacted by attorneys if he keeps it up
    2
  3020. Blew trash out of engine
    2
  3021. I prefer the compressed air. It blows the debris out because of the volume of air at the nozzle of the gun. If feel a vac is less effective, and equal amount of air has to come in through the port and into the vacuum nozzle.
    2
  3022. See you then!
    2
  3023. The story came with visual aids
    2
  3024. Exactly how I see it
    2
  3025. I loaded cylinder heads timing belts cams ect into a truck onceā€¦ not kidding ā€œI have a guy who will do it cheaperā€
    2
  3026. rainmanraysrepairs .com
    2
  3027. Donā€™t accept the polite decline?ā€¦here comes ā€œweā€™re done nowā€ version
    2
  3028. Heā€™s never been seen again šŸ¤·ā€ā™‚ļø
    2
  3029. Thatā€™s a body shops section
    2
  3030. It used to be šŸ¤£
    2
  3031. šŸ¤£šŸ¤£ā˜ļø
    2
  3032. Ya know, itā€™s not advisable to drive through flooded roads. 99.9999% of the time, itā€™s gathering ram air. The purpose is to get a cooler intake temp, and it performs its function. Itā€™s not dumb if it works.
    2
  3033. It took me 4.5 and I billed 3.5
    2
  3034. These are non serviceable ball valves, have to change the line
    2
  3035. Prolly next to a 10mm
    2
  3036. Not can do, itā€™s one piece
    2
  3037. Ooh no line is an 07, pre bankruptcy build and pre emissions
    2
  3038. We were billing 2.1 for the 1234yf evac and recharge. Add 1.0 for diag, and 3.5 for the condenser. 6.6 hrs. We being the dealer
    2
  3039. I never considered that b4. I suppose itā€™s possible. My thinking being that low end tires will grip the road less, causing longer brake pedal application, possibly causing more heat and leading to shorter rotor life. šŸ¤·ā€ā™‚ļø maybe? It would take a lengthy case study to make that call.
    2
  3040. Ā @godw1ll99Ā  they even use emojisā€¦The matrix has us
    2
  3041. Ā @ChristisKing7749Ā  I report them then they come right back with different names. My video today had a thread that went on for 220+replyā€™s. All taking about reading trading crypto.
    2
  3042. No, my home tools are cheepo tools. Or older shop tools that I replaced.
    2
  3043. 8 ish
    2
  3044. Naaahh itā€™s just broken right now
    2
  3045. Some channels can some canā€™t. šŸ¤·ā€ā™‚ļø
    2
  3046. Did not. When I brake things I just cut the scene out completely šŸ¤Ŗ
    2
  3047. Someone replaced the cable in my day off, but I did see it again a few wilds ago, needed an o2 sensor
    2
  3048. Ā @bungalowboyĀ  šŸ¤” Iā€™d be very surprised to learn of timing was the problem, bc that would effect all cylinders. Maybe pull the valve cover and see if the camshaft lobes are damaged. Could have leaking valve seatsā€¦does it misfire only at idle, or all the time on 5&6
    2
  3049. Injectors perhaps. Disconnect #5&6 Coils let it run for a few minutes. Then pull spark plugs and see if theyā€™re wet with fuel. If dry, injectors are not running. Also check injector connectors with injector test light (noid light) harbor freight sells the testers for $15-20. Itā€™s basically a bunch of test lights that fit in injector connectors. The lights should flash with Engine running indicating that the eco/pcm is pulsing the injectors
    2
  3050. Sushi from Publix supermarket. A PokƩ bowl to be exact
    2
  3051. Iā€™m working on it šŸ˜‰
    2
  3052. I think this was a ā€œwā€ motor not a ā€œuā€ motor (I think itā€™s w)
    2
  3053. He didnt realize that i set the jeep down on the stand
    2
  3054. Send me the meme! Iā€™ll take a famous jack stand!
    2
  3055. Donā€™t bring that evil on me
    2
  3056. No thatā€™s not very common anymore.
    2
  3057. Iā€™m not really a fan. They get messy and corrosion can still occur. There really isnā€™t a substitute for routine maintenance
    2
  3058. No, with no ground wire there canā€™t be a complete circuit
    2
  3059. Ā @rob.grangerĀ  dude I screw up stuff all the time! Itā€™s part of the job! This is how we learn! The important part is how we handle our mistakes!
    2
  3060. lol I know. It actually had two clips. I went back and got them after. I always do a recheck for those little dm things, bc Iā€™m very forgetful of minor details. Then comments go Reeeeeeee! šŸ˜‚
    2
  3061. I cut trust part out at the endā€¦was rather boring and nothing to see
    2
  3062. Ā @ConstitutionalFreedomFighterĀ  I totally got the notification šŸ˜‚
    2
  3063. Ā @SOU6900Ā  no way, Iā€™ve had 3-4 jump packs on a Freightliner before, it wouldnā€™t turn over
    2
  3064. I verified all that at the end when it worked! šŸ¤£šŸ¤£šŸ˜Ž
    2
  3065. Cutscene recheck my friendā€¦šŸ‘ That hose clips on In two places
    2
  3066. Marvelous!!!
    2
  3067. Amazon link in this videos description, itā€™s about half way down past the Amsoil links.
    2
  3068. Itā€™s in the hopper, Iā€™ll get it out
    2
  3069. These are death row walnuts that no longer have a place in society. We must salvage what we can from them before disposal. I wonder if we can run walnuts through a running engine to clean the pistons. šŸ˜ˆ
    2
  3070. I have several this year on the chemical cleaners
    2
  3071. Ā @JoeyFrankoĀ  My truck is a late production 07. The very last of the cat eye body style. The cool thing is that is has little parts from the 08 body style, like the shift lever. Being a dually makes it a unicorn to me. 220k ish (I havenā€™t looked in a while)
    2
  3072. Wait wait wait waitā€¦hold on hereā€¦. We can get EMP shielding for our DURAMAXs?
    2
  3073. We have 5w30 blend and 5w20 blend on reels. And 0w20 5w20 5w30 15w40 full syn in stackable 50gal cubes
    2
  3074. I was safe šŸ˜‰
    2
  3075. Our comes from 55 gallon stackable cubes and 525 gallon tanks, that are both refilled by a pump truck.
    2
  3076. lol that cool, glad youā€™re here!
    2
  3077. So sry to confuse. You are 100% correct! NEVER TRUST THE FLOOR JACK! I neglected to mention that I was just reaching and didn'l place my noggin under the car during this maneuver. My mistake for misleading everyone here. Don't do what "Donny Don't" Does!
    2
  3078. I did call the guy ā€œbuddyā€ šŸ˜³
    2
  3079. Napa, Oreilly the Zone and definitely from the OEMs
    2
  3080. Meaning a population of employees that seem to not care. My term the 2022 effect is meant to encompass workplace and societal dysfunction as a whole. Weā€™ve all experienced it in some fashion. For example go to Walmart, no registers are open, there are huge lines at the self check out area and there are three employees standing there monitoring the self checkout lines. I would think labor dollars would be better spent with one person in the self checkout lines and the other two with an open register. Just sayin
    2
  3081. Well I need time to make more vids
    2
  3082. Indeedā€¦they do make a much better product for this purpose. In retrospect, the real value here is knowing which pins to supply power to. The rest is just a switch. I guess I really paid $30 for the instructions
    2
  3083. It burns about 3gal overnight running power inverters
    2
  3084. I can store much more diesel than gasoline. I have 32 gal in the truck tank, and a 90gal aux tank.
    2
  3085. Iā€™m going to run duals first, and if thatā€™s not good enough I can upgrade one to a higher output.
    2
  3086. lol typos šŸ¤¦ā€ā™‚ļø
    2
  3087. Always !!!
    2
  3088. I try new things sometimes
    2
  3089. New in 2015
    2
  3090. Itā€™s a hybrid
    2
  3091. Theyā€™re the same part number with a different position on the cams. So one goes on backwards
    2
  3092. Gotcha at the end
    2
  3093. I got it no worries
    2
  3094. lol gotcha, I got it in the end
    2
  3095. Yes I did
    2
  3096. Gotcha! Check out the pinned comment šŸ¤£šŸ¤£
    2
  3097. We donā€™t do that on Maintenance free batteries anymore itā€™s been like that for 20 years
    2
  3098. Sick bro. You did it twice in a row šŸ¤£šŸ¤£šŸ¤£
    2
  3099. The cap was staged bro.. check the end scene. Youā€™ve been trolled
    2
  3100. Did I really?
    2
  3101. Fun Fact, a huge majority of people who buy or lease BMW, Mercedes, Land Rover Jaguar etc...do so do not care about the quality of car, they care about how it makes them look to other people. I know I get some backlash for this comment but the surveys indicate this. I believe it, because many folks with these cars do not have a budget to maintain these cars, meaning that the purchase was not a financial decision. These cars are not useful or practical, therefore the purchase was not motivated by necessity. Therefore I conclude that these are vanity pieces and nothing more.
    2
  3102. If we had the oil pump tool, the shop didnā€™t have one
    2
  3103. The hole for the adjuster was behind the caliper brackets, couldnā€™t get it
    2
  3104. Canā€™t do it, he said reeeeeee
    2
  3105. šŸ˜‚šŸ˜‚
    2
  3106. FR!
    2
  3107. Black should do it
    2
  3108. Nissan, the Chrysler of Japan
    2
  3109. Well there was a bit of an emergency and my guy had to go ASAP
    2
  3110. Iā€™m no longer employable šŸ˜Š
    2
  3111. lol sorry about those, theyā€™re for the engine cover
    2
  3112. because I wasn't very good at making videos back when this was edited
    2
  3113. Ā @SteveBakerIsHereĀ  hey it was a long time ago before I knew how to edit šŸ¤·ā€ā™‚ļøšŸ™ƒ
    2
  3114. Ā @ABCDEF-fg1wuĀ  engine mounts maybe
    2
  3115. Itā€™s a Snap On tool. Itā€™s part of a master set. Try eBay: Snap on Schrader tool
    2
  3116. šŸ¤£šŸ¤£
    2
  3117. Nope not yet, sheā€™s coming back this week.... maybe
    2
  3118. Nooooo!
    2
  3119. Nope it sure doesnā€™t
    2
  3120. Nope! If itā€™s that kind of clunker I wonā€™t go out and drive it till itā€™s inspected and or fixed
    2
  3121. Experience saved an engine that day
    2
  3122. Experience saved your engine that day.
    2
  3123. Ā @rbarr1200Ā  I totally see your point. I take good care of my Duramax and would flip my lid if it were damaged and replaced with a salvage engine. Believe me, I was pissed at the whole situation from start to finish. Had I owned the shop, the young guys wouldn't have been allowed inside an engine to begin with. Fortunately for the managers, the customer was ok with the engine and choose that over repair of the damaged one. At the end of the day the shop got off with less dollars spent, the customer got a newer engine than what he had, and a warranty to go with it. It ended up being a win win given the circumstances. The trainee got his trial by fire and learned a lot, and the managers didn't learn squat. They gave him another advanced level job right after. I got another job and got out of Dodge (no pun intended) shortly after this disaster was sorted out. It's not posted yet, but here's part 2 https://youtu.be/WZd6mHjS1rY
    2
  3124. Thanks Steve
    2
  3125. Good thing I wasn't welding on a Dodge.
    2
  3126. Ohhhi know. I did several "beads" for a reason. I didn't want things to get too hot and damage the core.
    2
  3127. The lifts have mechanical safety locks. The idea is to take the pressure and weight of the vehicle off of the hydraulics.
    2
  3128. Yup service declined
    2
  3129. PB blaster I if memory serves
    2
  3130. Ā @manbearpig2164Ā  šŸ˜‚šŸ¤£
    2
  3131. Because they needed a cheap fix. That's what they ordered. I did the best cheap fix I could.
    2
  3132. Naaahh they're fine. Been doing shitty welds for a while. I can weld, I just can't with any kind of talent.
    2
  3133. The matrix has you Neo
    2
  3134. Alldata
    2
  3135. Theyā€™re threaded straight into the block. No debris contamination, I took care to prevent anything from falling in
    2
  3136. I was really in the zoneā€¦frustrated zone.
    2
  3137. I didnā€™t follow directions and owned it between both pins not a single pin to ground
    2
  3138. Tow truck
    2
  3139. Ā @DonaldAJrĀ  I know what you mean regarding the love we have for turbines. Mine is attached to a diesel v8, itā€™s not fast (well kinda) but Iā€™ll never go back to a gas non turbo truck again.
    2
  3140. šŸ¤£
    2
  3141. I wanted to send this engine to Eric but it was cost prohibitive and I canā€™t let a good blown up engine go to waste
    2
  3142. LOL!! THIS!
    2
  3143. I have no idea why they develop a smell šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    2
  3144. It's not that difficult to fine me at work, sowing up at my house is great way to see how efficient I am with a backhoe.
    2
  3145. Hot shot shipping may be in the works for the future
    2
  3146. Naaahhh, I just didnā€™t want to brake hard with all of my stuff out back, I had plenty of stopping force in reserve šŸ˜‰
    2
  3147. Yup I still have some , never deny the basics
    2
  3148. Turns out it was wrong when it came in. I didn't notice till the comments section found it. I had to go back and recheck the video, I pulled up service data and it turns out the belt had been installed incorrectly.
    2
  3149. I have both and use the 3/8 more often
    2
  3150. Some fans can only run as a pusher, some only as a puller. SOME can run both directions. motor type and blade shape are the determining factors. This fan is capable of running in both directions.
    2
  3151. Thank you Leonard much ā¤ļø
    2
  3152. Weā€™re working on such things šŸ‘šŸ‘
    2
  3153. Makes sense!!
    2
  3154. That big pin comes out and hits the case wall, this turns the metal parts into a spinning grenade
    2
  3155. Now thatā€™s funny! šŸ¤£
    2
  3156. Ā @beardsntoolsĀ  Sry dude, thatā€™s just not true. I donā€™t seek clout, so it looks like your plan C is a no-go. I wonā€™t be seeking employment ever again, my shop is in the green including my payroll. The secret is managing loss instead of taking in huge margins šŸ˜‰ Iā€™m 8 weeks or so in and my bills are all paid.
    2
  3157. Ā @peterclaassen5750Ā  The built in margins needed adjustment (like the labor matrix) IMO
    2
  3158. Still plugging away it itā€¦.more to come soon
    2
  3159. šŸ¤£šŸ¤£šŸ¤£
    2
  3160. inĀ·terĀ·estĀ·ing /Ėˆint(ə)rəstiNG/ Learn to pronounce adjective arousing curiosity or interest; holding or catching the attention. "an interesting debate"
    2
  3161. Your right I checked and itā€™s an MKS, TY!
    2
  3162. I didnā€™t, the body shop guys did
    2
  3163. Link in description
    2
  3164. Really sucks when this kind of thing happens. šŸ˜¢ I lost a close friend a couple years ago, he got killed while riding. Weā€™re you at the Firestone?
    2
  3165. I could tell it was a motorcycleā€¦but didnā€™t want to think about it.
    2
  3166. Itā€™s all good. Swapped the ā€œupgraded connectorā€ with oem
    2
  3167. Ā @peterparsons7141Ā  Itā€™s about 20k to get a used 4post rack and the computer and a brand new setup will go for 60k+
    2
  3168. This is the reality.
    2
  3169. Hahaha right!
    2
  3170. Iā€™m postmaster Ford Lincoln Mercury!!!
    2
  3171. Back to Part 3 Extracting the broken bolt! Welding Explosion! Intense Bolt Extraction! Will it FAIL? Subaru Outback 2.2 2.5 https://youtu.be/yI9Nz0g26_o
    2
  3172. All we got here was a bunch of rain from the outer bands and some gusts. Thereā€™s more activity in the Atlantic right now too. Iā€™ll gladly take the next one to keep it away from North Fl
    2
  3173. I have 1200w of panels on my well house just in case
    2
  3174. Itā€™s made by NOCO, I think wal mart stocks it, if not google will find it
    2
  3175. Sometimes
    2
  3176. I like the NOCO stuff. Itā€™s foamy and satisfying to use šŸ˜‰
    2
  3177. I was bored šŸ˜
    2
  3178. Iā€™ve been there once, not much there
    2
  3179. I mock trolls that say you canā€™t get an engine wet
    2
  3180. Itā€™s been fixed. My fault sry
    2
  3181. I fixed it, so sry
    2
  3182. You mean the big dangling ball sacs? Lol no not for me. No need to flex šŸ¤£
    2
  3183. I fixed it so sorry
    2
  3184. Fixed it sry
    2
  3185. Yessssss it can!
    2
  3186. Nope canā€™t see it anymore
    2
  3187. The extended warrant is for a cylinder head issue I think itā€™s too late
    2
  3188. šŸ¤£šŸ¤£šŸ¤£
    2
  3189. I managed to condense a full day into and hour video šŸ¤·ā€ā™‚ļø
    2
  3190. Yes I did
    2
  3191. šŸ¤£šŸ¤£
    2
  3192. In the case, I have contacts too
    2
  3193. Yes, I have shame because I do not have a heavier table
    2
  3194. šŸ˜
    2
  3195. Confirmed! šŸ˜Ž
    2
  3196. Itā€™s was in metric šŸ˜
    2
  3197. It was in metric
    2
  3198. Iā€™ll take care of him, he bought this stuff b4 the code was made for us
    2
  3199. at the end of the day we should be here to help people, thats why we fix things
    2
  3200. the knock sensors on this engine are on the side of the block
    2
  3201. I was waiting for some one to catch that. (Easter egg) Itā€™s a screen for the solenoid, i put it back šŸ˜‰
    2
  3202. didn't look right, I considered it
    2
  3203. when he feels like it
    2
  3204. šŸšØšŸšØšŸšØšŸšØšŸ§ØšŸ§ØšŸ§ØšŸ§Ø
    2
  3205. No it has a filter for this sort of thing
    2
  3206. Forced induction and MORE FUEL
    2
  3207. Yes I like lemonade, the problem is that the lemonade is just sugar water with added sugar with some corn syrup, there is a lemon deficit within modern lemonade
    2
  3208. Ā @davidhomen4528Ā  lol I was šŸ¤£šŸ¤£šŸ‘†
    2
  3209. SRY...super busy right now
    2
  3210. It would be the least expensive, but itā€™s literally half of a repair. Sometimes piece of mind is more valuable than a few extra bucks
    2
  3211. People keep saying that šŸ¤£
    2
  3212. šŸ˜ˆ
    2
  3213. I JUST got oneā€¦a day late
    2
  3214. SKYNET is real
    2
  3215. Coffee
    2
  3216. I told em, Iā€™m not cruel
    2
  3217. Theyā€™re done just fine. I feel like that are a bit weaker than the Milwaukee packs, but have plenty of run time
    2
  3218. Iā€™m at about 99.7% on the language. No need to broadcast vulgarity, the world is full of it
    2
  3219. I needed this
    2
  3220. Hang in there, this will eventually
    2
  3221. šŸ¦ˆšŸ¦ˆšŸ¦ˆ
    2
  3222. šŸ˜‚šŸ¤£šŸ¤£šŸ‘šŸ˜‚šŸ‘‰šŸ‘Œ
    2
  3223. Soon!
    2
  3224. Youā€™ll be back
    2
  3225. I just wiped down with a towel, technically there were a few molecules left but whoā€™s counting
    2
  3226. No it wasnā€™t
    2
  3227. I didnā€™t say thatā€¦I explained why itā€™s frowned upon and can cost the shop money. Iā€™m not worried about a $12 seal
    2
  3228. Followed directions, canister up
    2
  3229. They're much stiffer and hold the wheels down over bumps (wheels can actually bounce up and with momentum leave the roadway for a split second). I have much less front end dip and bounce over elevation changes or dips in the road, and smaller harsher bumps are felt less in the cab. The fox isn't touted as a towing shock or anything like that, but its job is to stabilize harshness. And these do a fine job. I make a video on towing with them later..
    2
  3230. They ā€¦.. threw me into PuBLiC. I was drunk in a bar
    2
  3231. I also hate condemning modules ā€¦ itā€™s a theme amongst us I think
    2
  3232. They were already replaced
    2
  3233. And get the door up, and get the lift installed, and run some new outletsā€¦ the list goes on and on and on
    2
  3234. Iā€™ve been on vacation not renovatingšŸ˜‰ Buuut I do need to get the walls scrubbed again and maybe get some paint on the panels
    2
  3235. Arod brought the laptop itā€™s my cabinet šŸ˜‰
    2
  3236. I get that it has its place. But around here itā€™s dangerous
    2
  3237. Ok, who makes a comparable product and who has 60 years of engineering experience to back up their product line? You donā€™t have to hate on other people
    2
  3238. Replaced! šŸ˜‰
    2
  3239. Itā€™s actually still sitting in our parking lot. šŸ¤·ā€ā™‚ļø
    2
  3240. šŸ¤£
    2
  3241. Yes percolate! Thank you
    2
  3242. I have the Apollo D8. itā€™s for for around 3k
    2
  3243. Yea some do abs some donā€™t. This was an easy one. The difficult ones have to be pressed in and out. I dislike the press in type.
    2
  3244. Nothing to clean its new. No lube, itā€™s sealed, no loc tire/bolt glue BC itā€™s not necessary on any of these fasteners
    2
  3245. Yes of course! šŸ‘šŸ˜
    2
  3246. Sure I do. But a rubber dead blow was faster
    2
  3247. Negative i used a rubber dead blow mallet šŸ¤£
    2
  3248. Itā€™s a really good tool. I just bought the 1/2ā€ counterpart too
    2
  3249. I might take a sink bath here and there
    2
  3250. I didnā€™t, it came that way. The compressor clutch locked up and broke the belt off
    2
  3251. The compressor body is grounded, but the clutch coil isnā€™t so it needs its own ground
    2
  3252. Thatā€™s good bc šŸ–• you too. šŸ¤£. But to answer your question, I get a better view plus theyā€™re good feelers for tight spaces. I have a dually and the mirrors are almost as wide as the rear tires when theyā€™re out.
    2
  3253. I realize this now šŸ˜³ I didnā€™t see 7 and thought it both lines were one part. Should be interesting when only half the pats show up. Oops
    2
  3254. Back Rack
    2
  3255. welcome back!
    2
  3256. Depends if you need one, if you tow often or heavy you cant go wrong with diesel.
    2
  3257. Read pinned comment
    2
  3258. Yup
    2
  3259. Sorry dude, I donā€™t place ads, YT does that
    2
  3260. I break it up and change playback speed. Also the ambient noise helps to cover it up
    2
  3261. It a rubber mat that is cut to fit the floor. It seems very durable
    2
  3262. It just survived a hurricane šŸ¤£šŸ¤£šŸ¤£
    2
  3263. Yes, vacuum it down every time the system is opened. Air cannot get in because it will carry moisture in moisture will freeze in the system.
    2
  3264. I wondered if that could be the case, but I figured I would see or smell it
    2
  3265. Much thanks! šŸ˜Š
    2
  3266. High idle at 900 rpm will prevent glazing and keep oil pressure up, that belt wonā€™t break with this setup. Itā€™s an oem configuration found in medium duty trucks
    2
  3267. There are folks that need extra electrical power from the platform and the aftermarket kits for a second alternator range from $700-$1000. This project started because I wanted to show that the second alternator could be added to a Duramax truck with a $17 GM bracket a couple bolts and a new belt. Additionally, I have electrical system redundancy on my truck. ā€œ2 is 1, and 1 is none ā€œ
    2
  3268. The batteries will only draw in amperage as the Cells can accept it, a regulated alternator wonā€™t force amps into the battery. Ams are ā€œpulledā€œ from the source not pushed in. Edit: think of the concept like a garden hose, you have pressure and volume of water from a flowing hose. Electricity is similar, voltage is the pressure and amperage is the flow
    2
  3269. šŸ˜
    2
  3270. Depends on which part IG, I can say I have some coin sunk into this thing. Iā€™m thinking of it as building a new truck rather than buying one.
    2
  3271. Only on Toyotas šŸ˜
    2
  3272. ThisšŸ‘†
    2
  3273. I actually a gasoline partial home/portable. The issue is fuel consumption and noise, especially at night. This setup lets me burn less fuel with less noise, and I have the bonus of having 120v power generation anywhere, including remote locations.
    2
  3274. Look on Rock Auto for nator bolts they had a listing for GM alternator and bracket bolts M14x1.5 pitch if memory serves
    2
  3275. You're not wrong.
    2
  3276. ABSOLUTELY!
    2
  3277. Do you realize how much time that would take? Not spending 30 minutes on a bolt with a wrench
    2
  3278. Chrome is very soft
    2
  3279. I have one of those too šŸ˜‰
    2
  3280. Used a long chisel on an air hammerā€¦turned waaaay down. Donā€™t do it with a full throttle air hammer. Maybe just use a hammer and brass chisel. Seriously, b careful
    2
  3281. I left that joke to yā€™all
    2
  3282. Wow I thought we were getting screwed. šŸ˜­ Sry to everyone else whoā€™s being milked dry at the pumps
    2
  3283. Did you watch till the endā€¦nope šŸ¤£šŸ¤£
    2
  3284. I trolled everyone with that clamp. Got it at the end
    2
  3285. šŸ¤£ Weā€™ll see!
    2
  3286. Long weekend. No editing for me. šŸ¤·ā€ā™‚ļø
    2
  3287. Kill them all!!
    2
  3288. Truck/Driver eats tires. When they get to the 1-2/32ā€ range that wear fast! Time for a set soon
    2
  3289. Already ordered šŸ˜Š
    2
  3290. Molasses
    2
  3291. I'm not understanding what you're trying to say here
    2
  3292. Hahaha sure do!!
    2
  3293. šŸ¤¦ā€ā™‚ļø you canā€™t say that šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  3294. Good thing your parking brake was able to slow the vehicle šŸ˜‰
    2
  3295. Heeey
    2
  3296. Electrical tape is my go to... But I couldn't find it that day
    2
  3297. Thank you!
    2
  3298. BTW... Love Grady Judd!!!
    2
  3299. Close
    2
  3300. Shhhh... Trying to maintain some discretion. Good šŸ‘€
    2
  3301. šŸ¤£šŸ˜…
    2
  3302. All the time
    2
  3303. Itā€™s a water based paint, that white color is particularly prone to the peeling
    2
  3304. Ā @Puggy42069Ā  oops that a big typo bc I didnā€™t proof read
    2
  3305. Youā€™re lame, go watch wheel of fortune. And thanks for the $.0003
    2
  3306. I no touch other peoples builds
    2
  3307. no the ratchet isn't a ridgid. My red and green ratchets are indeed snap on. The orange impact tool is a ridgid and they're all fantastically useful in different ways
    2
  3308. You must have missed the cometary in regards to the fluid, because I did indeed replace it all with new brake fluid
    2
  3309. I literally just said itā€™s awaiting a proper disposal. Disrespect would be throwing it away. Donā€™t lecture me about our flag
    2
  3310. Itā€™s been on my to do list for months, just didnā€™t make it in time
    2
  3311. It only moves when towed. šŸ¤£ Not mine either
    2
  3312. I canā€™t stand the idea of shutdown at full speed. Itā€™s just feels wrong šŸ˜‘
    2
  3313. No Iā€™m not scrambling. Do you want to see car footage from last week or a historical event?
    2
  3314. Thank you šŸ˜Š
    2
  3315. Theyā€™re good šŸ‘
    2
  3316. You did, the FF is not far from me
    2
  3317. This wasnā€™t normal
    2
  3318. They do, ours are secured with metal straps that go into the the concrete. Theyā€™re called Simpson straps or Simpson hangars I believe. Whatever theyā€™re called they did their job!
    2
  3319. Iā€™ll hire a contractor šŸ‘šŸ˜‰
    2
  3320. No if fell down
    2
  3321. šŸ¤«
    2
  3322. I was thinking it came like that, but after two storms Iā€™m less inclined to ignore it
    2
  3323. šŸ¤£šŸ¤£šŸ¤£
    2
  3324. I would shoot at you
    2
  3325. You will need three or four bc they like to break
    2
  3326. Thanks to the Banks Intake System!
    2
  3327. $14 online $56 from the tool truck
    2
  3328. TikTok is brain cancer, the engineered dopamine response is causing mass addiction to the format and the AI uses the addiction to sell product.
    2
  3329. Weird!
    2
  3330. Cheap oil and it went waaaaay to long before spill and fill. I bet it burnt some oil and then low, lost oil pressure rot the cam phasers and caused them to lock at the full advanced position. The problem is that parts and labor encroach on the cost of an engine, and the cost of an engine exceeds the value of the car.
    2
  3331. I am everywhere
    2
  3332. I was out of town. Sry šŸ¤·ā€ā™‚ļø
    2
  3333. I was in the D
    2
  3334. Heā€™s back to normal and in great shape ā˜ŗļø
    2
  3335. šŸ’Æ!!! ā¤ļøā¤ļøā¤ļø
    2
  3336. When I can afford it. 10,000sq ft cost some $$$
    2
  3337. Risky business right there, you will always have have a tech thatā€™s not familiar with your car
    2
  3338. The starter?
    2
  3339. Heā€™s a great driver, especially on Sunday, in the driveway šŸ¤£šŸ¤£ Straight 8 Fireball 8!
    2
  3340. Sexual? These are industry standard terms. Whatā€™s going on In your head? šŸ¤Ø. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  3341. šŸ¤£šŸ¤£šŸ˜‚ I am a Chevy guy
    2
  3342. You didnā€™t engage safety squints
    2
  3343. Youā€™re right, Iā€™ll do better. (Not sarcasm)
    2
  3344. I already have one out for a rebuild, 1 repair in 4 years. The 1/4ā€ is going out next
    2
  3345. Can't go wrong with Milwaukee Fuel 1/2 or 3/8"
    2
  3346. Itā€™s fine ā˜ŗļø
    2
  3347. its the 2020's lol
    2
  3348. In the times of Electric vs ICE and mandates banning engines, we're all on the same team now. The old rivalries are DEAD now
    2
  3349. 4x2
    2
  3350. Ā @trump4ever508Ā  Weā€™ve all be there my guy. Get some sleep and try again tomorrow. (And turn your CAPS off plz) āœŒļø
    2
  3351. Ā @trump4ever508Ā  šŸ¤” are you ok?
    2
  3352. Paying the locksmith to code the cylinder and cut new keys. We didnā€™t feel the old keys had enough left to get an accurate recut
    2
  3353. Only in the right context šŸ˜‰
    2
  3354. 9th month usually
    2
  3355. I see what you did there
    2
  3356. Donā€™t let it fool you, I can have it wrecked again in 20-30 minutes. Itā€™s like a superpower
    2
  3357. Call me farmer Ray
    2
  3358. Instant friends!
    2
  3359. Getting tired of being right and then having to keep the ā€œI told you soā€ from coming out?
    2
  3360. Absolutely!
    2
  3361. No itā€™s just a seal to prevent moisture ingress
    2
  3362. I considered it, but I don't want to. Id rather have carpet and then put vinyl floor covers over it. You'll see later after I pull the dash out
    2
  3363. It's not what it looks like
    2
  3364. I donā€™t intent to run it for 24hr. Itā€™s an overnight only power supply. I have a regular generator for daylight but it makes a lot of noise. I only need a couple thousand watts max overnight for a fridge lights and a little window unit so thatā€™s why Iā€™m building this. Plus Ill also have power in remote locations.
    2
  3365. Ordered new insulation after these events, I canā€™t reuse that old insulation, if I did use the old stuff it would be instant regret
    2
  3366. Thatā€™s how this started, I need to run a harness from the switch gang to the bed box out back
    2
  3367. Actually, whatā€™s happening I decided to go ahead and use this opportunity to replace my AC evaporator core also šŸ„¶
    2
  3368. That's a good one
    2
  3369. Ordered already
    2
  3370. They sure do!
    2
  3371. I'm stressed a little over this one
    2
  3372. Mississippi is a GOLD MINE for old cars (good ones)
    2
  3373. Drivers side šŸ¤£
    2
  3374. I didnā€™t see any danger in it
    2
  3375. I know it is! But sooo many people say the K. I couldnā€™t help but to question it
    2
  3376. Iā€™m getting good feedback on how to tune it, thereā€™s a learning curveā€¦bear with me here
    2
  3377. Ā @Nick9drsĀ  yea some say online those areas too. Iā€™m of the opinion that lube goes on the little ears depending on climate and itā€™s more of a guideline rather than procedure. Ex. Antisense goes on everything up north, but we rarely use it down south.
    2
  3378. Technical difficulty, that was user error
    2
  3379. Itā€™s 93 today and 55%, my sweat is sweating
    2
  3380. Iā€™ll turn down the noise cancellation
    2
  3381. Yes JT canā€™t tell us what to do
    2
  3382. Absolutely not! Florida is not a southern accent. There are too many transplants to have an all encompassing accent.
    2
  3383. Iā€™m trying to save humanity from the fate of Idiocracy
    2
  3384. I canā€™t even fake a Boston accent except for ā€œcaaa(r) in the yaaad ā€œ
    2
  3385. The Nissan Transmission Video that I spoke of earlier: Total Transmission FAILURE? Circuit/Fault Codes? #mechanic https://youtu.be/sA3ZydnDkAg
    2
  3386. Better not
    2
  3387. Stalker!
    2
  3388. https://youtu.be/SJTypgTBBEw
    2
  3389. Micrometer/ digital calipers. ā€œToo thinā€ is an opinion. Just use specs-debate solved
    2
  3390. I don't have the skill level to repair ECMs
    2
  3391. Noooo way is it a Snap on or even close. You get what you pay with tools IMO. Itā€™s good for what it is. Itā€™s a code reader with good live data, and it can graph some things. Which is awesome for the price. I still use a Snap on scanner but I donā€™t always need to. I use the little Topdon tool for ā€œlight dutyā€
    2
  3392. Yea but it was true.
    2
  3393. But it was wrongā€¦ a lot wrong. Like an hour and 40 minutes wrong. I just had to.
    2
  3394. Nope I wanted to do better so I learned a new skill
    2
  3395. The thought occurred to me šŸ˜Ž
    2
  3396. Needed the tag #ā€¦ unfortunately I failed. My cams didnā€™t pick them up either. Had the raw footage analyzed and we couldnā€™t get the plate ā˜¹ļø
    2
  3397. Iā€™ve noticed such things, thereā€™s many in this area
    2
  3398. Old habits die hard
    2
  3399. Ā @terryrobertson8382Ā  It is indeed šŸ‘šŸ‘šŸ‘
    2
  3400. Iā€™ll bash Chargers and Challengers next, then Iā€™ll move on to Camaros. šŸ¤£
    2
  3401. I was carrying, thatā€™s exactly why I donā€™t road rageā€¦ not worth it when it gets out of hand
    2
  3402. Ok
    2
  3403. We donā€™t claim this one
    2
  3404. Comments like this tell me I have reached a new audience šŸ˜‰
    2
  3405. Dirt/sand from the painted area on the road, it accumulates bc no one drives there
    2
  3406. He should also remove the reflectors šŸ¤£
    2
  3407. Just a stang šŸ¤£šŸ¤£šŸ¤£
    2
  3408. He has the footage too šŸ˜ˆ
    2
  3409. This one had already been replaced before.
    2
  3410. You missed the part where I said that I flushed everything it out off camera šŸ‘
    2
  3411. Just getting the lights onā€¦Iā€™ll redo everything to a proper buildout soon. (Already have a proper power cable and RV connector)
    2
  3412. lol youā€™re still on over that šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  3413. But then they scratched and leak down all the way from the shaft damage
    2
  3414. Rodger Dodger!
    2
  3415. Morning!
    2
  3416. All of em šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  3417. You missed the very end
    2
  3418. More test drive footage... Caught Faking a Video? ā€‹ā Driveshaft Falling Out While Driving https://youtu.be/20gV1Dkg8-8
    2
  3419. Dude I had three GoPros down there Edit: trying to catch the noise and maybe a vibration
    2
  3420. I donā€™t have enough stalls for more help
    2
  3421. Thereā€™s a few things that we must start accepting in life, they greys were just the start of it
    2
  3422. Ā @kenore4003Ā  it was worth the tear down I think. I could always put it back together and return it šŸ˜‰. In fact I think I will. $10 is $10
    2
  3423. It was $10
    2
  3424. Sure did
    2
  3425. B-Town lucked out! We all thought it was going to the Skyway which would have flooded us pretty bad. Port folks in Ft. Meyers flooded again šŸ˜ž St. Pete is a wreck along with Tampa.
    2
  3426. Ā @clbcl5Ā  šŸ¤£šŸ¤£
    2
  3427. New
    2
  3428. I assume so
    2
  3429. Is that why the non doors fly off mid flight?
    2
  3430. Donā€™t tell Lake Speed heā€™d be so mad at me!
    2
  3431. I still have it, Iā€™ll drain it level
    2
  3432. It can get so thin that it slides off of the bracket on the inside, then it just falls out
    2
  3433. šŸ¤£šŸ¤£
    2
  3434. They can actually fall out, there is a few mm of space we tween the rotor and the bracket, and when the backing plate wears thin enough, the ears of the pad will slide out and pad plate will eject from the caliper
    2
  3435. Saw a brand new GMC 3500 dually fall from 6 ft. No injuries except for the truck
    2
  3436. Well get a restart/first start and test drive video
    2
  3437. Wisconsin
    2
  3438. Yea, thatā€™s how I record information.
    2
  3439. Close enough šŸ«”
    2
  3440. Ā @john_thorpeĀ  hahaha typo
    2
  3441. I didnā€™t say anything about Trump. Its just fun to say Chi-NA
    2
  3442. Good move driver šŸ«” Stay safe out there
    2
  3443. Waaaaaaat. Why r u on the roadside?
    2
  3444. šŸ–•China
    2
  3445. Scotch Brite Roloc Bristle Disc Made by 3m P/n 51131-07524 and 07528
    2
  3446. I was first
    2
  3447. Yea I had microphone issues in this one
    2
  3448. šŸ˜¢ Iā€™m working on it
    2
  3449. I had some audio issues on this one (operator error) In think the noise cancelling wasnā€™t set up correctly
    2
  3450. Driveshaft maybe? hard to feel it from here
    2
  3451. Sent it a little too hard
    2
  3452. Morning!
    2
  3453. I actually did replace it, but itā€™s picking up the magnet in the bearing. The hub assembly was a carquest bearing and I think it needs a carquest sensor to go with it
    2
  3454. Reeeeee is a mocking sound that I make in my head when the keyboard warriors start to chime in. Kinda like when adults are speaking on Charlie Brown
    2
  3455. Flower holderā€¦not kidding
    2
  3456. I can set them to post at a designated time šŸ˜‰ And no I donā€™t sleep šŸ¤£
    2
  3457. 10 smaller
    2
  3458. Itā€™s totally there
    2
  3459. Called the magic drain plug tool from OTC tools. Link in description
    2
  3460. I just had my eye-crometer calibrated šŸ¤£
    2
  3461. šŸ˜
    2
  3462. šŸ¤Æ
    2
  3463. Think of the BG cleaners like this, it uses a chemical approach to break down and prevent carbon buildup. Its must less costly and less invasive. It can remove large deposits but that takes time. This Prius for example is a perfect candidate for a 30,000 mile cleaning treatment with the chemicals because it will also prevent future buildup. Some engines cant be cleaned with chemicals if they have superchargers or turbochargers. The cost difference is substantial as the intake has to come off and gaskets replaced. Realistically, this tool is better served when the opportunity presents itself, like when an intake is removed. I would still suggest using BG cleaners at 30k intervals and avoid the need to medial blast valves and intakes. You're doing the right thing.
    2
  3464. I'll still use chemical cleaners as well, there is major cost difference here as one service requires removal if the intake manifold. It should be noted that a chemical cleaner WILL not clean to a degree that we just witnessed. The real benefit of chemical cleaning is to prevent buildup by treating the system early in the engines life and on a regular basis.
    2
  3465. The require maintenance, thatā€™s the only reason
    2
  3466. Thatā€™s the new standard for regret!
    2
  3467. Iā€™m soaking the studs in oilā€¦itā€™s coming
    2
  3468. I get a gold play button at 1m I hope we make it that far, that would be incredible!
    2
  3469. Thats Cody, his channel is CPā€™s garage. Dave is here
    2
  3470. Ā @aenoymotorsĀ  Itā€™s a coding error that weā€™re trying to fix. It keeps reverting back to $30 after we change it.
    2
  3471. NONE of the OEMs suggest a fluid change interval. They all are claiming lifetime fluid. The question is, how to they define 'lifetime?" Lifetime of the warranty or lifetime of the owner? Think about it.
    2
  3472. Negative
    2
  3473. Play on words there lol
    2
  3474. šŸ¤£ ok then, my crain brainium really was slipping
    2
  3475. Eric O was gracious enough to send me his audio file!
    2
  3476. They're extra spicy lately
    2
  3477. Waaaaaaaahhhhh!
    2
  3478. I bought my own brake clean. Nice try tho
    2
  3479. It is indeed a numbers game
    2
  3480. yessss!
    2
  3481. Thank you
    2
  3482. Iā€™d be interested to hear what he says too.
    2
  3483. Thatā€™s ok IMO because itā€™s being filtered, but takes long time
    2
  3484. Ā @scattersphereĀ  Iā€™m the same way! I need to use the daylight. I ended up painting my back porch thatā€™s under construction. (Long term project) I tried but after a couple hours I was spent.
    2
  3485. ere how awesome the brain is. I can't smell or taste either, except sweet things. So I made pot roast last night and couldn't taste anything. I had a Whopper today and I could taste it. I have formed a hypothesis on the matter: My brain doesn't doesn't know what my pot roast tasted like, therefore there was no sensation, but it does know what a Whopper taste like. I think one part of my brain is substituting the sensation to another part even though the actual taste ability isn't functioning. Try the experiment, I'm curious to learn of you have a similar experience. Don't have to use pot roast and whoppers but a new food and a familiar food.
    2
  3486. Soon after I started at that small shop. I was in the wrong place there.
    2
  3487. I wiped it outā€¦.
    2
  3488. We did that in the last video of the Tahoe
    2
  3489. There is, we did a service on the trans also
    2
  3490. But it actually works (in the right circumstances) Itā€™s not going to fix ruined seals or rod knock, but with a carbon clogged engine, it does some good
    2
  3491. Itā€™s all in good fun. Believe it or not the AI doesnā€™t care about comments.
    2
  3492. You did šŸ¤£šŸ¤£
    2
  3493. Someone call them for me
    2
  3494. I understand that the people in desert have unreliable power or live off grid and they use lots of solar and batteries for their power needs
    2
  3495. We have 240 and 120. I was referring to the people in the desert. I understand that they have to run big solar and wind systems bc the grid is unreliable and/or limited
    2
  3496. Not this one, but yes they do
    2
  3497. Thatā€™s actually in progress now, itā€™s been a priority. Background: Iā€™ve also just finished some construction in the shop. We just added a second garage door and a 3rd lift. Iā€™m in a position where Iā€™m working and building at the same time.
    2
  3498. I usually ignore aftermarket items at first, itā€™s not usually relevant to the situations
    2
  3499. Ā @NatsumidragneelkimĀ  I do now
    2
  3500. I did it overnight once! 3ā€ of water in the truck
    2
  3501. Am always late on Sunday. I donā€™t do any YT work on Friday or Saturday (usually)
    2
  3502. So did you find the previous video? šŸ¤£šŸ¤£šŸ¤£
    2
  3503. šŸ¤«šŸ¤
    2
  3504. Thank you ā˜ŗļø
    2
  3505. Iā€™ll fix it with a splice later
    2
  3506. Ā @AntonioClaudioMichaelĀ  all good man, no apologies needed, Itā€™s cool that folks pay attention to the details
    2
  3507. Negative, that ws the #3, you can see the #1 coil between the alternator and the wiring harness
    2
  3508. I like to learn things that are outside of my purview, and I find phonetics to be much more efficient when communicating alphanumerics
    2
  3509. It was an insurance job, and they donā€™t pay for camber adjustment on the side that wasnā€™t impacted.
    2
  3510. Negative, I actually didnā€™t. I just find the phonetic alphabet is best. It just really irks me to hear people say ā€œAā€ as in Apple ā€œBā€ as in boy etc. The phonetic is so much more efficient.
    2
  3511. I believe itā€™s the stop/start battery. For the cars that turn the engines off at red lights. Iā€™m not too familiar with MB so I could be wrong in this specific example
    2
  3512. Ā @dwightyost1606Ā  Does yours have play in it like mine? I can grab the glass or the track and move it quite a bit (IMO)
    2
  3513. Dude I donā€™t even know yet. You have the same problem? Glass is a little sideways and water pouring in that corner?
    2
  3514. Negative on body damage. I even looked for bubble rust under the paint
    2
  3515. You didnā€™t read the title šŸ˜‰
    2
  3516. Good morning!
    2
  3517. Between the thin wire leads and the Flukes fuse we were ok. It was the edge of the envelope no doubt. I'd be best off to install another inline 20a fuse to protect the Flukes fuse. The Flukes fuse is "time delay" to and they say it will take 25a for about 30 seconds.
    2
  3518. The wires on the car were 4x the size of the wires on the meter leads, they can handle 25a. I didnā€™t melt them, that was the reason the fuse was blowing
    2
  3519. It's a low temp solder that will melt with a heat gun. I didn't use them for this repair because of the heat in the area of the harness, I was afraid the solder would melt and the wires would loose connection.
    2
  3520. Jeff you shouldnā€™t have. We had a done deal šŸ˜Š
    2
  3521. Yea but it crimps so well that way
    2
  3522. Indeed you are!
    2
  3523. Felt torqued to me, itā€™s not coming off
    2
  3524. Finished it, there was a pt2
    2
  3525. I donā€™t have a 32mm wrench, sockets wonā€™t fit, and pliers no not slip, like a pipe wrench the harder you pull the more they squeeze
    2
  3526. Only for a week this time šŸ™ƒ
    2
  3527. I dunno where to get one. A viewer sent it to me. Google ā€œscreaming goatā€ I dunno if AvE knows about my goat yet
    2
  3528. Not this time. I was tempted but too busy that day
    2
  3529. Ā @markemarkpsv1Ā  lol I thought we were opening a reeee discussion šŸ¤£
    2
  3530. I did
    2
  3531. 94*
    2
  3532. Fancy pants McGee over here šŸ‘ˆ
    2
  3533. I have a filter in my tank but no separator. However, have an electric lift pump with a CAT water separator on the frame, so any water that comes into the trucks tank wonā€™t make it to the pump.
    2
  3534. šŸ’ŖšŸ’ŖšŸ’Ŗ
    2
  3535. šŸ¤£šŸ¤£
    2
  3536. Happy Treason Day! No hard feelings šŸ¤£
    2
  3537. I did!
    2
  3538. Troy works here nowā€¦heā€™s a young apprentice
    2
  3539. ā€œNobodyā€™s right if everybodyā€™s wrongā€ šŸŽ¶šŸŽ¶ - Buffalo Springfield
    2
  3540. That would not be ok
    2
  3541. Iā€™ve heard some say that. Iā€™m not sure why. Maybe to prevent connecting the cables backwards? Thatā€™ll fry something for sure, hopefully just the main fuse.
    2
  3542. I got it out
    2
  3543. Ā @swiebelunknown6353Ā  well I figured at first it was just a dead battery, turns out it wasnā€™t the case. I donā€™t want to lean on the scorching afternoon Fl sun, but I wasnā€™t about to spend all my time out in the parking lot. Iā€™m sorry that unprofessional conduct was your takeaway from the situation. Iā€™ll do better šŸ˜ŽšŸ¤™
    2
  3544. I think you missed where I charged it for 20 minutes and then put a new battery in
    2
  3545. I ā¤ļømy DURAMAX (and I actually tow with it)
    2
  3546. It could be. Itā€™s always quite hot where I am and GoPros donā€™t like the heat because they can overheat easily
    2
  3547. Yup she's mine
    2
  3548. Itā€™s gone šŸ˜‘
    2
  3549. I think the short video people left and now the die hards remain for the long form vids
    2
  3550. Because the scraper is FLAT and it stays flat bc of the metal
    2
  3551. Yea Fortay sounds better
    2
  3552. No I think I misspoke, it was 24 lbs
    2
  3553. Ac water I think
    2
  3554. It was YouTubeā€™s playlist šŸ¤·ā€ā™‚ļø
    2
  3555. Get well Soon!!!
    2
  3556. And an occasional treatment will keep it that way!
    2
  3557. Itā€™s another pc. We got another one bc I keep invading hers šŸ™ƒ
    2
  3558. Noooo! Itā€™s could damage bearings
    2
  3559. There are only awake people around here nobody is woke
    2
  3560. Ya got me!! šŸ¤£šŸ¤£šŸ¤£
    2
  3561. Ā @FollowingtheCliffNotesĀ  yesssssss!
    2
  3562. Ā @PigsawjanetĀ  yup, unpacking the shutters and making ice
    2
  3563. a WIN šŸ„‡
    2
  3564. did smoke test it again in part 3. Check the description for the link. It's not posted yet.
    2
  3565. Or they cornered the market buy under cutting their competition and putting them out of business. Then lower their quality due massive profits. Chinaā€™s labor practices and pollution levels are abhorrent it should be our duty to bash them.
    2
  3566. It was available via links as an early release
    2
  3567. Maybe in the install video
    2
  3568. Yes Edit: OK I didnā€™t intend for it to be in unboxing video. I guess thatā€™s just where it went.
    2
  3569. Hammer them onto metric fasteners šŸ¤£
    2
  3570. Ā @edwardgriffin8092Ā  Listen weā€™re both going to be drunk idiots here šŸ¤£šŸ¤£
    2
  3571. No it doesnā€™t work that way
    2
  3572. Yup. Fixing it this week. I'll post the repairs.
    2
  3573. Ā @bmarcy86Ā  Thanks for the sub. I'm glad you like the content. I'm at GM dealer. I get a hold of all makes though. Customer service is everything.
    2
  3574. Delicious
    2
  3575. You're right, It was early and I didn't read the work order, or the badges and name plates. I work on these all day, it's all the same to me anyway.
    2
  3576. It's in the works
    2
  3577. Yes I know..lacrosse Lucerne... It's all the same to me šŸ˜œ
    2
  3578. I'm waiting on a decision crib the owner and the dealer. I'll make a part two of I get to do a repair. I think I can save this one.
    2
  3579. Ā @my95buickĀ  I think it has an internal coolant leak after the timing cover reseal job. There's a rubber gasket in there to allow coolant to pass through the timing cover into the engine block. It wasn't replaced, figured forgotten or damaged. I'll make a follow up video if a repair gets approved.
    2
  3580. I mean yeah.. But I can't do it. I don't like being sued, and I don't know the facts of the matter before I got this car. They could have outsourced this repair to a cheap shade tree mechanic and not even known about the problem. But still don't buy from any Buy Here Pay Here. This type of thing is to common from those places
    2
  3581. I havenā€™t heard, I need stuff! Iā€™ll try to msg him, might be a fun road trip
    2
  3582. I approve
    2
  3583. Iā€™m not following
    2
  3584. I have an Autel and I strongly dislike it
    2
  3585. šŸ˜‰ they donā€™t pay me Bugatti wrecking money, but if they did, Iā€™d still buy store brand groceries, no name clothes and used cars
    2
  3586. I donā€™t have the notched handle, I need to cut the one that I have to fit the valve
    2
  3587. Oooh who was it? Maybe Iā€™ll go over and continue the oil filter civil war ā˜ ļø
    2
  3588. This is part three from a four part series. 2,3&4 Weā€™re available through links before I posted them you mustā€™ve gone down the rabbit hole from part one
    2
  3589. It was at the body shop they sent it to me for the mechanical repairs
    2
  3590. Teach me the way
    2
  3591. I think itā€™s 14.4
    2
  3592. šŸ¤£šŸ¤£
    2
  3593. been banning them all morning SMH
    2
  3594. Sry, I wonā€™t do that again
    2
  3595. Mine too. Go šŸ‡ØšŸ‡¦šŸ‡ØšŸ‡¦šŸ‡ØšŸ‡¦
    2
  3596. šŸ‘
    2
  3597. Yea sometimes. Maybe 1 per year-ish gets refused for nasty.
    2
  3598. šŸ¤£šŸ¤£šŸ‘
    2
  3599. šŸ¤£šŸ¤£šŸ˜Ž
    2
  3600. Lol i didn't mean any harm on Scotty, he was just the first person that came to mind in the moment. (I heard it too when i edited, was hoping nobody would notice)
    2
  3601. Its a v6, half of the cylinders were running, that was enough to keep it going
    2
  3602. Heā€™s got his own thing goingā€¦itā€™s a completely different genre I think
    2
  3603. The broken part wrecked the piling surface on that front cap near the pulley. Itā€™s machined into the head, so it needs a head, cams, abs belt at bare minimum. Considering age and vehicle worth, a new head / cams is going to exceed the value of the vehicle by far.
    2
  3604. Welcome to good burger! Home of the good burgerā€¦ can I take your order??
    2
  3605. It was, I changed it a couple weeks ago.
    2
  3606. My apologies, I shot this one with my phone, I think it defaulted to HDR
    2
  3607. I have one scheduled on a 2024 Silverado šŸ˜‰
    2
  3608. šŸ¤£šŸ¤£šŸ¤£
    2
  3609. Yup cable made its way back to the terminalā€¦šŸ˜³ got me
    2
  3610. BG In-Force penetrating oil. Check eBay itā€™s not normally sold retail
    2
  3611. Challenge accepted, Iā€™llsee you in congress
    2
  3612. Hu hu hu ā€¦ yea Bevis
    2
  3613. I didnā€™t know šŸ˜¬ But I found out, Iā€™m in his chat
    2
  3614. Ā @kkcsynzx6250Ā  itā€™s in the about tab on my page. Canā€™t really post in comments. Rainman Rays Repairs @ g. Mail.
    2
  3615. Works for me. Helps to get past all the gaslighting
    2
  3616. Inspecting for damage
    2
  3617. šŸ˜³
    2
  3618. It balances pressure pulses and can create a ā€œtunedā€ system help with scavenging, much in the same way equal length headers will do. Equal length referring to the individual pipe lengths from each cylinder. Thatā€™s why the header pipes were curved itā€™s all about cylinder scavenging.
    2
  3619. Hahahahah, yā€™all are suggesting parts that have already been replaced šŸ¤£šŸ¤£
    2
  3620. Yesss
    2
  3621. I ended up capping off all the vac leaks temporarily to rule it out. Stayed down the intake and found no leaks. We shall see tomorrow šŸ˜‰
    2
  3622. šŸ¤£šŸ¤£šŸ¤£
    2
  3623. This one sat for 5-6 years
    2
  3624. HA!!!! you GOT It!!!! šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  3625. https://amzn.to/3lg0FyM It's called the Stinger from Streamlight. Police and firefighters carry these also, amongst may others. The battery cell is rechargeable and the chargers can be wall mounted and run 120v or it can go in a vehicle and run off of 12v. And there are three brightness modes with a strobe feature. I used the stobe once so seatow could find me at night, my boat would have gone down if I didnt have my bad a$$ light!
    2
  3626. You got here FAST HAHAHAHHA
    2
  3627. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø not this timešŸ«”
    2
  3628. It totally didnā€™t occur to me in the moment šŸ˜®
    2
  3629. Itā€™s worth it, I e had mine for years
    2
  3630. Ā @robertbarfield2643Ā  seize ā€¦. Yes I have heard of it. I donā€™t live I. The rust belt and we donā€™t use us dn here
    2
  3631. Yea probably, but thatā€™s a lift kit for ya
    2
  3632. IMO, theyā€™ve really stepped up the game the last few years. It shows a good company culture and I bet it will pay off in the long run to trade in quick profit for long term growth
    2
  3633. Ā @thesushifiendĀ  If you want to steal a car just use a tow truck, itā€™s less effort and stressful overall. Plus witnesses will think itā€™s a repo bc you look more legitimate, especially if you use the lights and wear a bright vest.
    2
  3634. Gives it character
    2
  3635. Out of gas
    2
  3636. Heeey I know Elite Motor Works! I moved out of SRQ and into Bradenton, less of a commute. The LWR traffic is killer with all of that new housing thatā€™s being built. Yea itā€™s a little unnerving going out solo. But itā€™s time! Next time Iā€™m around Iā€™ll stop in.
    2
  3637. Hahaha right!!
    2
  3638. Nope got that from amazon šŸ¤£šŸ¤£
    2
  3639. https://youtu.be/6fZuCUpqvHw
    2
  3640. https://youtu.be/6fZuCUpqvHw. No it really was our fault.
    2
  3641. I am a robot
    2
  3642. Thereā€™s some weirdness going on with the TY AI
    2
  3643. šŸ’Ŗ
    2
  3644. I tow often as well. My dump trailer loaded with gravel weighs in at 16,000lbs. I need my bigger engine. Itā€™s all relative
    2
  3645. Iā€™m surprised to hear that he reused the clips!
    2
  3646. I just canā€™t winšŸ¤£ I wanted to do a good job, I really did!
    2
  3647. Itā€™s has auto adjusting headlights I think
    2
  3648. I have a boat load to edit on that one
    2
  3649. šŸ˜‚
    2
  3650. Fun facts!
    2
  3651. Later
    2
  3652. 1 ton all day
    2
  3653. Look what you didā€¦.took it to a whole nother level
    2
  3654. Not really, my short videos donā€™t do well. Twas just a bit of fun
    2
  3655. Doing it tomorrow
    2
  3656. Close YT and try it again
    2
  3657. had the fan behind me to blow it away
    2
  3658. been busy with other things
    2
  3659. I was thinking the same
    2
  3660. No, what is this wrench you speak of?
    2
  3661. Because Cadillac engineers hate the world
    2
  3662. Right!? I should get them to pay me šŸ¤£
    2
  3663. Nope!
    2
  3664. The next dayā€¦Iā€™m still tired
    2
  3665. Ā @TradesDigitalĀ  well now I feel badā€¦ I donā€™t want 360p šŸ˜
    2
  3666. Itā€™s not me, Iā€™m uploading in 4k
    2
  3667. Manualā€¦ thereā€™s buttons that allow you to choose the highest gear available or command a downshift
    2
  3668. Who says Im normal??
    2
  3669. Ā @egonthefish4614Ā Ok I did that one deliberately šŸ˜Š
    2
  3670. I throw it away without looking at it šŸ¤£
    2
  3671. Iā€™m livin on the edge
    2
  3672. Morons
    2
  3673. If it wasnā€™t the 4l80 I wouldnā€™t have touched it
    2
  3674. The other side was ok
    2
  3675. Only 2 parts. lol I got 4 parts from the Black Death F150 seriesā€¦now that one was milked šŸ¤£šŸ¤£
    2
  3676. Good day!!
    2
  3677. Yea yea yea!!!
    2
  3678. Ā @bearing_aficionadoĀ  They just didnā€™t want it. Maybe heā€™ll change his mind after seeing the footage
    2
  3679. $15 vs $450
    2
  3680. They use in house fleet personnel and outside shops/ dealers
    2
  3681. Nice linguistic Judo, ya got me!
    2
  3682. Ā @crowttubebot3075Ā  They usually delete their comment and down the thread. Such a waste of time
    2
  3683. Just plain water for the brake fluid, it's hygroscopic
    2
  3684. They earned that one
    2
  3685. Sry my guy. I couldn't get it done today.
    2
  3686. šŸ’Æ thatā€™s the way, pay for the result and get what you pay for
    2
  3687. WHAAAATTT??? RYAN!....smh
    2
  3688. The engine is mounted to the subframe, ā€œloweringā€ the subframe doesnā€™t change the relationship between it and the subframe. The rack needed more pace between engine and subframe. Destroyed the bearing? You must be an engineer.
    2
  3689. i took care to not rotate the shaft. You're right, the steering angle sensor would be out of calibration of the wheel rotated out of position.
    2
  3690. Bachoā€¦ check Amazon link
    2
  3691. Your comment is a little presumptuous i think. Yea I use their stuff and I buy their stuff. I like it and they sell really good tools. My content is fairly raw and unplanned. The truck just happened to be there bro. No sucking up was intended. And i I bought my scanner with my hard earned $$ because I wanted it
    2
  3692. Itā€™s so you have something to strip when trying to install them
    2
  3693. Lol I recovered the prybar. One of the converters had a heat shield rattle
    2
  3694. šŸ‘
    2
  3695. Absolutely! I had to take advantage of the heated flange, otherwise I may have had to heat it again
    2
  3696. Yes I did
    2
  3697. Ā @DeepakKumar-lv4teĀ  The difficulty really took me by surprise on this. I realized afterwards there were several things that could have been done differently, like sawzalling the metal bushing sleeve. Truth be told this a prime example of my toxic trait. I routinely do things the hardest way possible and refine from there. Iā€™d actually like to this one again.
    2
  3698. Bushing was too small for a ring compressor
    2
  3699. Iā€™m in Fl, everyone move down here during the last couple yearsā€¦odd šŸ§
    2
  3700. Always
    2
  3701. My house And CC with monthly expenses (financial adviceā€¦ DONT carry a CC balance
    2
  3702. Sure was!!
    2
  3703. hello!
    2
  3704. Itā€™s probably hate speech
    2
  3705. It was wiped off with a blue towel
    2
  3706. Thank you!!!!! šŸ˜Š
    2
  3707. Absolutely! I have one at home actually
    2
  3708. He went in to other things, the 9-5 deal wasnā€™t fitting his goals. No hard feelings and we still talk
    2
  3709. I didnā€™t get the check, but I am offering an opportunity for an explanation šŸ˜˜
    2
  3710. Sheā€™s at home canā€™t take her to work every day
    2
  3711. I can only hope to ruffle feathers to that degree!!!
    2
  3712. Iā€™m take Hurricanes over tornados all day! I can prepare for hurricane, our structures are built for sustained wind of hurricanes. cWe canā€™t do anything about flooding, but thatā€™s just Florida Tornadoes on the other hand are concentrated and unpredictable.
    2
  3713. Because it doest work that way. Iā€™ll say it another way, I really pissed them off
    2
  3714. Ā @willydavidĀ  For what? Didnā€™t slander/liable not much to go on. Besides, think about it, thatā€™s really bad PR.
    2
  3715. I greased the 90* gear set not the pneumatic motor
    2
  3716. Length of the heads, and the drive size. Two of them are 1/4ā€ and two are 3/8ā€ drive.
    2
  3717. 1/2ā€ impact made by ridged. Got it at Home Depot. Batteries and charger were separate
    2
  3718. Not a problem
    2
  3719. Sometimes in life, thatā€™s all we have
    2
  3720. Check pinned comment
    2
  3721. Thank you!
    2
  3722. But youā€™re here now!
    2
  3723. Adding storage
    2
  3724. Facts!!
    2
  3725. Pinned comment šŸ‘†
    2
  3726. Refresh
    2
  3727. Boostane is ready
    2
  3728. We will deal with that when it gets here.
    2
  3729. Is there power down there yet?
    2
  3730. There will probably be a freeze on disaster area real estate deals to prevent predatory buyers scooping up land at a discountā€¦ or there should be.
    2
  3731. Voted for a hurricane? Suck a car charger
    2
  3732. These people also live in house trailers in 55+ communities. They live in the boats that are gone. These people bought homes here in the 70s and live the entire lives there. These people work at the restaurants, and sell groceries. These people put their lives into their small businesses and overnight, they lost it all. Who are you?
    2
  3733. I meant to say sulfur, Iā€™m silly I know.
    2
  3734. I know šŸ¤£šŸ¤£šŸ˜‚
    2
  3735. I love my aviation wrenches! Theyā€™re my go to B for almost everything. I bought this my set back in 2005ā€¦ā€¦.crap Iā€™m getting old
    2
  3736. Thank you
    2
  3737. I saw your Google review! It was you or a copycat Beavis. šŸ‘šŸ‘šŸ‘šŸ‘
    2
  3738. The tow truck backed into the shop and we picked it up straight from the truck
    2
  3739. The chrome is covered under warranty šŸ¤Ŗ
    2
  3740. šŸ‘ŽChina
    2
  3741. Soooo true
    2
  3742. $300 each
    2
  3743. I remember we had to get butane irons for airbags on Malibus. I think they could bleed voltage into the circuit and set the bags off. That was my understanding back then.
    2
  3744. šŸ¤£šŸ¤£šŸ¤£šŸ¤£ right!!!
    2
  3745. ā€œPay us this, and we will pay you that when you need itā€¦..(files claim)ā€¦ā€¦ we apologize for the circumstances, unfortunately your policy doesnā€™t cover these damagesā€
    2
  3746. WoooošŸŽ‰šŸŽ‰šŸŽ‰šŸ„³!!!
    2
  3747. Wait till Sundayā€™s video, you see why Iā€™m laughing when it watch itšŸ¤£šŸ¤£
    2
  3748. Thx Dave ! šŸ˜
    2
  3749. The body shop knows about it, they ordered one
    2
  3750. The body shop will do that, they never ordered one for me
    2
  3751. Link in description, and screen and a pop up
    2
  3752. lol just a little
    2
  3753. It was $1000 and will make a good golf cart for my yard, plus I'll have my kids knowing how to drive by the time they're 10 On top of that, nobody should ever possess this for use on public motorways, It's a collision death trap
    2
  3754. Those are Toyotas , just ask Scotty
    2
  3755. I KNEW I would find this comment! TY!!
    2
  3756. boom!!
    2
  3757. They do that to cause a rise in oil pressure. Lets say someone double gaskets a filter, meaning the old gasket gets stuck on the housing and they didn't notice. When the new filter is installed it simply seals against the old gasket. At lower (idle) pressure it's usually fine, however at higher RPM, pressure rises and will cause the top gasket to push out causing a MASSIVE engine killing leak. Shops rev the engine to simulate driving conditions as a way to assure check for the accidental double gasket. I don't like the practice bc its a "policy" that covers up potential poor performance from entry level tech rather than focusing on training, accountability and diligence. The nature of the business is "go go go get it done and out of the door", rather than take your time and do a quality job.
    2
  3758. tried, it was too long
    2
  3759. Ā @MrKoko0507Ā  weā€™re working on international shipping now
    2
  3760. šŸ˜†
    2
  3761. It's really not that bad for the quality, I sell it for 9.99/qt. Mobil one goes for 12.39/qt and it's nowhere near as good.
    2
  3762. I often do, but this time I just didn't make it back to the tool box.
    2
  3763. Yea they drill holes through wiring harnesses and fuel tanks!
    2
  3764. The kind that says I cant record my work, in a tiny room full of managers, while trying to intimidate me into submission. We see how that's working out.
    2
  3765. I stopped recording to wipe it down before sticking it inā€¦. Editing
    2
  3766. negative twas a dealer
    2
  3767. No Iā€™m against it at 3k. 5k letā€™s talk, 6k itā€™s time, 8k your overdue. 10k your pushing it, hope you have Mobil 1
    2
  3768. no i never saw this one again. Could be marks made on the assembly lines
    2
  3769. You could do a double oil change, although itā€™s probably not critical that you do so. Iā€™d say change it, drive it, and change it again after 500-1000 miles. Thatā€™ll give it time to possibly clean out anything that may be deposited. There are also many ā€œoil flushā€ products out there. You pour the can in , run the engine fit 10-15 minutes, then do the oil change normally. Some of them are good and effective at removing deposits, some not so much.
    2
  3770. oh yea its fine,
    2
  3771. Ahhh I did good sir. My wrenches are called flank drive (from Snap On) they use the surface area/flank of the fastner rather than the bolt edge
    2
  3772. Weā€™re paid by the job (we all have a pay rate, letā€™s say itā€™s $20/hr) If a job calls for 3 hours of billable labor, that job will pay the technician $60. If the tech does it in an hour, he still gets the $60. If it takes the guy 6 hours, he still gets $60. Our income is directly proportional to how efficiently we can work.
    2
  3773. šŸ¤£
    2
  3774. Negative, itā€™s a customers truck
    2
  3775. Have a BG exchange done, itā€™s better than dropping the pan and refilling. The machine gets the majority of the fluid and the spill and fill only gets about 40%
    2
  3776. Yes šŸ¤£šŸ¤£šŸ˜³
    2
  3777. Who says that our overlords are interested in helping out the public??
    2
  3778. Ā @wwjoshdewĀ  Itā€™s really unnecessary IMO. No reason to be a holes to each other
    2
  3779. I dunno about that. Precision Transmissions used to Troll my videos to tell me that I sucked wt my job . It was about a year ago. Iā€™m wondering it was the son. Either way, I donā€™t think that channel likes me very much. šŸ¤·ā€ā™‚ļø
    2
  3780. šŸ‘‹
    2
  3781. Yā€™all like the vids, I like the comments šŸ˜‰
    2
  3782. Nawwwe I wasnā€™t talking about you my guy, it was more for the ABS module people
    2
  3783. No šŸ¤£
    2
  3784. Itā€™s a game that I play around here. I can always teen when new people are watching, thereā€™s excessive Reeeeeeeee šŸ¤£šŸ¤£
    2
  3785. Just having fun
    2
  3786. Not yet šŸ˜‰
    2
  3787. šŸ¤™
    2
  3788. I havenā€™t seen it since the inspection. The lady had some timing cover work done before, maybe she gave them another shot to fix it
    2
  3789. No I think I was just using on old jug
    2
  3790. So folks donā€™t mess with the transmissions
    2
  3791. TY
    2
  3792. šŸ˜
    2
  3793. Yes
    2
  3794. Absolutely, but far too many people buy first, then have it looked at!
    2
  3795. The diesel nozzles depend. At some pumps and at truck stops, the nozzle is much larger than a gasoline nozzle. Sometimes theyā€™re the same size. A gasoline nozzle will always fit into a diesel, and a diesel nozzle will not always fit into a gasoline filler.
    2
  3796. The injector lines have to be replaced, theyā€™re one time use b bc lines. They crush to seal when installed and should not be reused
    2
  3797. Totally Jimā€™s Towing , I just didnā€™t want people calling the first tow company and going reeeeeeeeee
    2
  3798. You must have missed that part
    2
  3799. parts hold
    2
  3800. mahle
    2
  3801. I've done similar jobs b4, not a repost
    2
  3802. They drive to tampa all the time to get parts. we need a hub down here I think
    2
  3803. waiting for engine
    2
  3804. Same truck, painted like the 07 dually
    2
  3805. Excellentent comment! Thank you for the compliment!
    2
  3806. Oh Iā€™m serious
    2
  3807. I spray them down with a hose on the way out. Sometimes I include it sometimes I edit out (depending on how long the video is)
    2
  3808. Because $$$$$
    2
  3809. šŸ˜ thatā€™s fantastic!!!!
    2
  3810. It's totally warranty claim. I'm at a dealer.... For now
    2
  3811. There aren't many being sold. I've driven them. They feel like the V8 when driving. They have descent low RPM power. I don't think they would do well while towing. Personally I'd still rather have the V8. The L4 turbos have a crowded engine bay and there's a lot of parts that could fail in the future. Time will tell with these engines. If you want a turbo, get the Diesel.
    2
  3812. Engineers are looking into that. They say you should use GM only oil and filters. 0w-20 oil probably isn't helping the situation.
    2
  3813. That's not true only half of it is Chinese made junk... The other half is Mexico made junk
    2
  3814. Yeah I know the feeling I've owned Chevy trucks since I was 16 years old. Unfortunately all that's really left that's worth a damn are the 2500 and 3500 trucks with the Duramax Allison.
    2
  3815. I bet you know about the old 4040 center post machineā€¦ the one that could hit you in the face with the tire bar
    2
  3816. No I canā€™t see things like that, otherwise the ego can run wild. Where would it stop? Oil changes? Light bulbs, filters etc?
    2
  3817. Theyā€™re slightly annoying on large tires. Sometimes they have to be removed on a big wheel and tire, then the cleaning and scraping process has to be redone
    2
  3818. Thereā€™s always an exception to every rule. I suppose the difference is knowing
    2
  3819. Yes I did. It got the garden hose for about 20 minutes
    2
  3820. Finally!
    2
  3821. Ā @BigBoyNowYTĀ  I actually didnā€™t even notice it when I was backing out. Didnā€™t realize till I drove it later that the gauge came on at all. Then the questions and comments came that you guys saw it was on when I left the shop. I had to go back and watch to see and was like šŸ˜®šŸ¤Æ
    2
  3822. I hope so! I still have the first oil filter. I trying to get the customer to come in for an oil flush. When I get that 2nd filter, Iā€™ll cut them open to see the difference! And yea itā€™s all getting GoPro recorded for scientific purposes!
    2
  3823. Electrical tape is the best bandage! Itā€™s pliable and water resistant
    2
  3824. Me too, It sucked working on those jeeps
    2
  3825. Iā€™m not going to fight you šŸ¤£šŸ¤£šŸ¤£
    2
  3826. So across country deliveries, canā€™t be late due to a natural disaster?
    2
  3827. Iā€™ve seen them get stuck on cars that only see seasonal use. (Cars parked in Fl while the owners are up north)
    2
  3828. Iā€™m all good now, Twas a minor sprain of the wrist
    2
  3829. Ā @RichardBullittBushĀ  Swing by a pick me up
    2
  3830. Did not, itā€™s was available through a link only
    2
  3831. AVE has the whole set! I can't say I'm not inspired!
    2
  3832. Because...engineers
    2
  3833. šŸ¤£
    2
  3834. Work tuck model, no frills here. The GMC Denali and Chevrolet High Country trims are pretty nice
    2
  3835. There are EXACTLY six other YouTubers that don't like my content. One even steals my titles.
    2
  3836. Then I can afford a go pro and won't have such shyt picture quality šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  3837. šŸ™„šŸ¤£
    2
  3838. šŸ¤£šŸ¤£šŸ¤£
    2
  3839. Negative
    2
  3840. šŸ¤£šŸ¤£šŸ¤£
    2
  3841. Me too šŸ˜
    2
  3842. Challenge accepted
    2
  3843. Body guys have a totally different skill set, most never do this kind of work. It baffles me how they can weld the front of one car to the back of another and nobody can tell the difference, yet they donā€™t do anything mechanical. Plus the two types of work require completely different sets of tools
    2
  3844. Yea me too!
    2
  3845. It wasnā€™t blatant, it was reckless. At least I was hiding behind the fender
    2
  3846. Iā€™ll tell them it was staged, and they need to prove that the events took place in the shop. Iā€™ll then claim that the background and all of the audio was dubbed in during editing.
    2
  3847. $$$
    2
  3848. I bet itā€™s sitting offshore waiting for permission to come into the country
    2
  3849. I donā€™t have one
    2
  3850. Sure am, it's a low ROI
    2
  3851. I can dodge springs like I'm in the matrix
    2
  3852. šŸ˜‚
    2
  3853. Iā€™m an astronaut , and Thank you for using ā€œYouā€™reā€ properly
    2
  3854. Ā @JosephArataĀ  Oh it's not just that. They told me I can't make videos of my work at all. Soooo I'm just just going to keep doing it. We'll see what happens next. šŸ˜
    2
  3855. Lol I know it's not a thing. I got in dealership trouble over this... So I'm kinda being a smart ass
    2
  3856. Soon... very soon
    2
  3857. Lol. All good bro. Nothing there was actually secret. I was taking a jab at someone.
    2
  3858. AvE is my hero šŸ¤£
    2
  3859. I know, I didnā€™t notice it from my point of view. I was sad to see it
    2
  3860. šŸ¤£šŸ¤£ jk
    2
  3861. I realized I was ā€˜product placingā€™ and decided to crudely black it out using the least amount of effort possible to illustrate that point that I was in fact NOT engaging in product placement
    2
  3862. Without definitions, langage doesn't mean much. Definitions are important
    2
  3863. They said Jigga Watts in the movie...should have been gigawatts but Jigga watts sounds better
    2
  3864. Rob how about the signatures on the dash?
    2
  3865. Iā€™ve been doing this far a little while šŸ˜‰
    2
  3866. It's just this one thing thats a problem. Updated gaskets fix it right up. Then is bulletproof
    2
  3867. Everyone does everything different! Only wisdom can truly recognize this
    2
  3868. Yes I didnā€™t catch it. Itā€™s actually an 03 šŸ˜¬
    2
  3869. Doesnā€™t matter. The oil in the pan is always the ā€œdirtyā€ oil. The internals get post-filtered oil on the ā€œclean sideā€ Prefiiling the filters can get the contaminate in the ā€œcleanā€side. I could dump sand the oil pan and it wouldnā€™t hurt a thing so kind has the filter still flows. (Donā€™t dump sand into engines)
    2
  3870. I support this message šŸ˜Š
    2
  3871. Hello
    2
  3872. Thank you!
    2
  3873. The Scotty boys should be entering the chat any second now
    2
  3874. Iā€™m going mail Eric O a broken jet ski šŸ¤£
    2
  3875. I bought that about 4-5 months ago. The shop has Autel machines but I didnā€™t like them. Theyā€™re a little slow.
    2
  3876. Check description itā€™s there, Iā€™ll pin it too!
    2
  3877. Eyesight, lane, departure, collision/object, sensors are EXTREMELY sensitive. If you have an obvious visual defect, that sensor IS the problem! Those things can even malfunction due defects in the paint thatā€™s on them.
    2
  3878. Ā @TheHrb1234Ā  you should watch this one ā˜ļø
    2
  3879. Isnā€™t that the test where they lock the crank and then supply pressure and vacuum in the cylinders to check bearing clearance without teardown? Never seen it heard of it.
    2
  3880. Exactly
    2
  3881. Sounded like itā€¦ I said HVAC control module
    2
  3882. What nooo way
    2
  3883. Weā€™re working on that. ( he had the vehicle first)
    2
  3884. Iā€™m working on itā€¦he needs a daily. Then we can play with projects
    2
  3885. I had a 10,000,000 mile mustang once. šŸ˜ search it real quick
    2
  3886. They were ok, about half way worn. But my guy wanted to get it done now
    2
  3887. Reeeeee!
    2
  3888. Actually, thereā€™s something to those helicopters I see low-level military flights over my house all the time and the flight radar says that they are Cessna citation
    2
  3889. Itā€™s pick n pull in Sarasota Fl. Itā€™s a junk yard
    2
  3890. Ā @coreyfairbanks7374Ā  no not yet, soon
    2
  3891. I found two 44mm overdrive pulleys. Iā€™ll have to loose the decoupler feature but it will be worth the extra alternator speed
    2
  3892. It will run for days without issue as long itā€™s not at idle.
    2
  3893. I have an 85w panel in the corner of my shed if it fits itā€™s going on
    2
  3894. The diesel mechanical fans pull much more air than an electric fan can produce. Look at the shroud and fan design Vs the fan shroud on a gas truck. The electric fans can actually produce an airflow restriction in the diesel trucks
    2
  3895. I see your point and youā€™re not wrong. Snap on does have some innovating tools that are worth the bucks. Theyā€™re not the end all be all but they are a premium product. Just as good works fine until it doesnā€™t.
    2
  3896. Start at the best case scenario. For example this job was quoted as a ā€œRemove and replace exhaust manifoldsā€ letā€™s say itā€™s 4 hours book time. Then add .5-1.0per broken bolt. Customer needs to know it cold fail and the head has to be removed. Plus the price of the gaskets and bolts ect.
    2
  3897. šŸ¤£ Iā€™ll do it the easy way next time
    2
  3898. Hahah, I guess I didnā€™t notice all of the space to fit a drill šŸ¤·ā€ā™‚ļø
    2
  3899. Ā @MrVsbt1Ā  so was I
    2
  3900. Iā€™d like to see Antarctica for myself
    2
  3901. Ā @Scooter30FTWĀ  šŸ˜
    2
  3902. Theyā€™re horrendousā€¦.yet quite comfortable
    2
  3903. FWD non turbo
    2
  3904. Yea but Iā€™ll actually restore this one
    2
  3905. Not going to crank a 7.2 l diesel
    2
  3906. I almost scaled the fence to get it that dayā€¦.almost
    2
  3907. Itā€™s 12v
    2
  3908. šŸ˜ž Google does that not I
    2
  3909. Last year of that body style in the 6500 trucks
    2
  3910. Everything thatā€™s in my section runs and drives except the suburban and the jeep
    2
  3911. Were almost going to install a Yukon Locker
    2
  3912. nope
    2
  3913. That would be so cool!
    2
  3914. I paid for it before
    2
  3915. Anti-gravity
    2
  3916. So much horsepowers!!!!!
    2
  3917. Itā€™s a counterproductive procedure to pull the little plug
    2
  3918. Folks tend to overrun oil change intervals, the extra additive can really help
    2
  3919. šŸ¤«ā€¦industry secrets
    2
  3920. Waiting for the parts. Iā€™m excited to see it shift again
    2
  3921. The JM3 wrenches are for the traditional style filters. I could have one made for the Toyota filters bikini already have several of the ā€œcupā€ tools to remove them
    2
  3922. Sure!
    2
  3923. šŸ˜¬ ooh so sorry šŸ˜ž
    2
  3924. šŸ¤Æ
    2
  3925. šŸ˜³
    2
  3926. šŸ˜‚ Right!
    2
  3927. Reeeeee!
    2
  3928. I see what you did there šŸ˜
    2
  3929. Florida was built by fire ants
    2
  3930. I think someone smuggled it in
    2
  3931. I havenā€™t done anything with brightness
    2
  3932. Iā€™d love to catch a cougar in the car
    2
  3933. Nothing is paved here, itā€™s all gravel and recycled asphalt
    2
  3934. šŸ’Æ
    2
  3935. It has no emissions whatsoever
    2
  3936. Ā @user-DR.James87Ā  no vid on that one, needed front end parts, I made the same repairs on my Silverado
    2
  3937. Not my area, and yea itā€™s a junk pile
    2
  3938. šŸ¤£šŸ¤£
    2
  3939. Ya dont say??? LOL
    2
  3940. super butt hurt, Im a sensitive being
    2
  3941. it is what it is, we should at least appreciate the humor
    2
  3942. i think is a bunch of old news. I understand fram makes an excellent filter now. check out @fordbossme Rich gets into oil filters often
    2
  3943. They seem to want one for no reason
    2
  3944. Ā @xunheilvsnipezx3324Ā  hahaha Yea you confused me pretty bad on that one šŸ¤£
    2
  3945. I yea it was cut out. I was having a conversation during and it had to go.
    2
  3946. The pass side doesnā€™t receive a tension load from the engine torque so itā€™s much less likely to fail.
    2
  3947. negative
    2
  3948. I wasn't up there long enough to roll it over
    2
  3949. by the shelves it the front
    2
  3950. I got it when you weren't looking
    2
  3951. No I did that with a GoPro. Itā€™s got this flex mount and a real strong spring loaded clamp to attach it to things. Worked like a charm
    2
  3952. Just an Evap small leak P0447 I think.
    2
  3953. Not yetā€¦. Waiting
    2
  3954. The valve cover leaks oil on the back of the head. Itā€™s running down the valve cover and dropping off the bell housing
    2
  3955. $500ā€¦.šŸ¤£šŸ¤£
    2
  3956. Fuel deliveryā€¦ thatā€™ll be $100 plz šŸ¤‘
    2
  3957. I should totally memorize every car part for every manufacturer! Back to flippin burgers for me
    2
  3958. I see this. šŸ˜‰ itā€™s technically not the same line. The metering device (orifice tube or TXV) is between the service ports Edit: the evaporator core is also in the mix
    2
  3959. lol yea I know
    2
  3960. Ā @RCRadioShowĀ  challenge accepted
    2
  3961. Not a good time to turn off the supply chainā€¦.again
    2
  3962. Been on it all hurricane season šŸ«” Keep your pantry full yā€™all!
    2
  3963. Yes
    2
  3964. Coffee , no sleep, jet lag and crappy food= wandering Vegas at 5am šŸ˜¬
    2
  3965. They have them too!!!
    2
  3966. Hahahaha beer at 5am
    2
  3967. Go the ā€œaboutā€ tab on the home page look under business inquires
    2
  3968. I mean you can still make it for day 2 šŸ˜. Just sayinā€™
    2
  3969. I knooooww! Next year itā€™s on! šŸ˜ Iā€™m hooked!
    2
  3970. Ā @mustangman6579Ā  šŸ˜¬
    2
  3971. .
    2
  3972. Iā€™d rather be sleeping šŸ¤£
    2
  3973. Like I said last video, everything is going to change
    2
  3974. šŸ¤£šŸ¤£šŸ‘šŸ‘šŸ‘
    2
  3975. I saw his truck, but no Matt. Maybe tomorrow.
    2
  3976. Right!! šŸ¤£šŸ¤£
    2
  3977. They existā€¦ 1-800-complain gets a refund from corporate
    2
  3978. I flush clutch cylinder too
    2
  3979. We managedā€¦ this is my 3rd demolition
    2
  3980. Scammer!
    2
  3981. Tractor Supply
    2
  3982. You canā€™t drive a bobcat one handed
    2
  3983. Norm is my guy! Dude should have his own channel!
    2
  3984. These are grade 8 or 10.9 rated and have specific shank lengths. Replacements would have to be ordered from the dealer turning a two hour job into a two day job. Plus it would add a considerable expense. Fasteners only get replaced if theyā€™re damaged.
    2
  3985. We charge a flat rate per job based on the labor guides. If it takes an hour or a day, the bill is the same
    2
  3986. šŸ˜‚šŸ¤£šŸ¤£
    2
  3987. Thanks!
    2
  3988. Aaahhhhh but the thing is, the trans is lubed at the output shaft
    2
  3989. I squinted
    2
  3990. no way the axle was aligned in its splines and the seal wasn't even touched. The air driver just overcame the locking ring. A regular hammer would have achieved the same effect but runs the risk of mushrooming the threaded end. And that would be bad.
    2
  3991. By design perhaps?
    2
  3992. In video descriptions
    2
  3993. I have several šŸ˜‰
    2
  3994. I found the same hot glue used by the factory in the headline, I assume itā€™s going to be ok
    2
  3995. Thatā€™s bc they werenā€™t there when I started the engine šŸ˜
    2
  3996. I was working at a dealer at the time
    2
  3997. Thanks! It's comments like these that keep me going.
    2
  3998. Alldata..and they have a consumer version where you only pay for your cars
    2
  3999. Negative, I didn't get the email
    2
  4000. MaybešŸ˜
    2
  4001. It this time! šŸ˜
    2
  4002. Heā€™s camera shy
    2
  4003. Just crush them more šŸ˜ˆ
    2
  4004. Agreed
    2
  4005. Itā€™s very very junk! No saving it
    2
  4006. Engineering not requiredā€¦itā€™s non structural to the building (someone build a building inside of a building)
    2
  4007. Cliff happens to be an electrician, we know its junk. Weā€™ve been slowly removing all the garbage wiring since I moved in. Found several 240v circuits that had 120 outlets off of one of legs šŸ˜­šŸ™„
    2
  4008. What you didnā€™t see is that the threaded collar was rusted on solid
    2
  4009. ā˜ ļø
    2
  4010. Ā @user-ln7of9gs4sĀ  I have many irons in the fire at all times. The pole barn shop is sill in the works.
    2
  4011. 4 hrs for the first one, two hours after that bc I knew the procedure. I did 4 of them in total
    2
  4012. Maybe we didnā€™t get/see the the emailā€¦. resend to RainmanAppointments@gmail Lauren will see it. Ttyl
    2
  4013. šŸ¤£
    2
  4014. Everyone is important
    2
  4015. They've earned their reputation
    2
  4016. My apologies friend, no offence intended. Your right I may have been a bit insensitive to the masses. I was just saying what I was thinking in the moment
    2
  4017. Diesel wonā€™t burn with a lighter, not enough heat
    2
  4018. All of them
    2
  4019. Everyone gets a little extraā€¦but when you drive for hours to get to me, I have to hook ā€˜em up
    2
  4020. It was an early release available through links šŸ˜‰
    2
  4021. I bet he saw it šŸ˜‰
    2
  4022. Ok
    2
  4023. You must be new here
    2
  4024. I broke up the music enough to avoid it
    2
  4025. Seals are in the compressor face
    2
  4026. Waiting on a cam phaser
    2
  4027. Weā€™re doing that later
    2
  4028. šŸ¤«
    2
  4029. Remember those buildings that collapse a few years ago in China? The ones that they found landfill trash mixed into the concrete? I think they cut a corner or two. Reputation is a tough thing to change
    2
  4030. Changes seem to affect how the algorithm works. I think the AI recognizes different scenery and sounds. Itā€™s not necessarily a bad thing but I am mindful of it.
    2
  4031. Ā @tarille1043Ā  šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  4032. Looking for aluminum sparkles
    2
  4033. Pressure solenoid B
    2
  4034. Ā @WhitefolksTĀ  Bradentucky! IYKYK
    2
  4035. Iā€™ve have time to sort out the odds and ends šŸ˜‰
    2
  4036. There are three more in the parking lot šŸ˜¬
    2
  4037. Aloha!
    2
  4038. Contact Import A Part in St. Louis MO. Eric is the I_Do_Cars YT channel. If anyone can help you itā€™s him
    2
  4039. Itā€™s for the little kids
    2
  4040. Excellent observation!
    2
  4041. Iā€™ll need a 240v inverter. I actually could use 240 bc my well water pump runs 240
    2
  4042. Check xtreme diesel .com. I used a factory feature in my ecm so all I needed was a power switch and I had to run the wire to a pin in the ecm. I dunno if Cummins has similar features
    2
  4043. Good observation, I should have mentioned that. I actually have another gauge/meter that Iā€™m going to connect to the rear system, it is not installed yet
    2
  4044. Sevaral things
    2
  4045. But then I wouldnā€™t need two, and two alternators are better than one
    2
  4046. Totally šŸ‘
    2
  4047. Yes it can šŸ˜ˆ
    2
  4048. :)
    2
  4049. GMC Yukon xl
    2
  4050. I salvaged some captains chairs from a Tahoe for my back seats , those are going in instead of the benchā€¦.theyre in transit now
    2
  4051. YouTube made updates again and itā€™s broken, I understand notifications are also not working.
    2
  4052. Warranty or no warranty that is the question
    2
  4053. Me too
    2
  4054. That crossmember does not come out, itā€™s the subframe
    2
  4055. you missed the pinned comment
    2
  4056. Uploaded part two just before midnight, then part one after midnight I think.
    2
  4057. I bribe youtube
    2
  4058. Legion squared šŸ˜
    2
  4059. Of for sure, itā€™s not a neutral lever
    2
  4060. Negative ghost rider Iā€™m going to fix this one up because I need it
    2
  4061. late late night editing
    2
  4062. ā€˜Twas a VW Touareg the glass was $1100
    2
  4063. Shhhh donā€™t give them any ideas
    2
  4064. Sure did, on a VE Touareg. It was $1100
    2
  4065. I canā€™t answer that
    2
  4066. to troll people LOL
    2
  4067. You're not wrong LOL
    2
  4068. Duplicolor for vinyl was the best color match that I found and it's holding up well over time
    2
  4069. Ā @Michael-yi4mcĀ  Ya know when the dust settles from all this social tension that weā€™re experiencing, we all will realize that both sides had the same goal the whole time. The agitators within our population are real bad guys here. Itā€™s not a bunch of hippies from Portland or a bunch of rednecks from Georgia that the ā€œenemyā€. The country is incredibly large and spans an entire continent! Sea to shining sea we have one of the most diverse populations ever to exist in the history of humanity. We will never agree on everything and we should embrace that!
    2
  4070. The tribalism is the problem. Youā€™re saying 150m people are wrong and their opinions arenā€™t worth listening to. History rhymes
    2
  4071. Were doing a light rebuild and a cam swap. I have a couple videos out about it so far
    2
  4072. Second!
    2
  4073. Naaah not me I donā€™t surrender my emotions. I said what I said to combat the cruelty. Iā€™ve seen many creators give up and quit bc of the hate. When that happens everyone missies out because information stops being shared
    2
  4074. Youā€™re not wrong sir! Itā€™s a delicate balance and I do like to push the envelope. My big mouth has caused a lot of trouble in the past, but has also lead to a lot of good things.
    2
  4075. Iā€™m stealing that one
    2
  4076. lol we can all find common ground somewhere šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  4077. Good eye. The truck came in white and the green is a wrap.
    2
  4078. I think it's a wrap. White base model trucks cost less than different colored trucks.
    2
  4079. šŸ¤£šŸ¤£
    2
  4080. I deal with the general public
    2
  4081. Sure did. He didn't care. Dude was convinced that an alignment would fix it. Down the road he went.
    2
  4082. No I did all that checking to cover myself. When a customer walks in and asks for a specific service, it's a red flag to me. Usually that describe thre problem and ask first an estimate. Example customer walks in and says "I'd like my transmission flushed"...I hear "my transmission is slipping"
    2
  4083. It was close I think šŸ˜¬šŸ˜¬
    2
  4084. Ā @Daniel-gi3joĀ  On that note, I think we beat them. Iā€™ve seen the scammers moving into other channels.
    2
  4085. I'll do a longer video next time
    2
  4086. Thatā€™s a negative. I failed to mention it but if you start the engine with the cap off it just starts pumping fluid out
    2
  4087. I failed to mention that itā€™s not going back to New York Edit: I sanded them down off camera, not very entertaining to watch rust being filled away šŸ¤·ā€ā™‚ļø
    2
  4088. Nope youā€™re good
    2
  4089. šŸ¤£šŸ¤£šŸ¤£
    2
  4090. Donā€™t temp me šŸ¤£
    2
  4091. Bc that took 8 more hours. The main bearings were capped by the block skirt.
    2
  4092. Yea I did change it. Didnā€™t film that part
    2
  4093. Sure did. They were brake cleaned and blown out. I also use Lucas oil stabilizer for his assembly lube
    2
  4094. I did forget that butā€¦. But I got it on my recheck b4 the pan went back up
    2
  4095. I just do what Iā€™m toldā€¦ personally I would have preferred to do things differently. I do what the guy who signs my paychecks tells me.
    2
  4096. I didnā€™t really feel the flange was in danger. I could have done those studs with a big socket and one at a time, but that would have tanken and houršŸ˜‰ Dont get me wrong on safety, I never put myself or anyone at risk, and I always hide from a change of state regarding potential energy, whether itā€™s a press, spring compressor etc. if I can hide from the line of fire I will. One never knows what will happen. Not counter trolling you make an excellent point.
    2
  4097. Oh cā€™mon, I make one artistic intro and you give me an eye roll. At least I dont have paid advertisements for the first 5 minutes
    2
  4098. Thank you! šŸ˜
    2
  4099. Better late then never!
    2
  4100. its always flammable
    2
  4101. Are there even any Saabs left, I havenā€™t seen one in a long time. It feels like years
    2
  4102. Naaaw, itā€™s a departure for the regular format, folks will unsub over it šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    2
  4103. Garden hose out back did the trick
    2
  4104. Aloha to the 808!
    2
  4105. Theyā€™ve been around for decades, havenā€™t moved offshore yet
    2
  4106. Ā @lawrencenoverojr3096Ā  šŸ¤£
    2
  4107. Everything we saw is for commercial/civilian use
    2
  4108. I accept that challenge šŸ˜
    2
  4109. Ā @chopperb019Ā  All good bro! J/K šŸ˜†
    2
  4110. Ok thatā€™s better šŸ¤£šŸ¤£, donā€™t be a stalker. Iā€™m In and out all the time at the shop.
    2
  4111. Yea I sat waaaayyy too late šŸ¤£šŸ¤£šŸ¤£šŸ’€
    2
  4112. Itā€™s situational
    2
  4113. LOL
    2
  4114. And thank you too!! šŸ‘
    2
  4115. I do!
    2
  4116. What would you like to see?
    2
  4117. I need to get through this current oil change first. Itā€™s my first switch to Amsoil and I need a baseline of the Amsoil results before adding the bypass filter. That way I can measure how effective the bypass system really is.
    2
  4118. Iā€™ve found mistakes while editing and had the chance to correct it!
    2
  4119. Awesome! You wonā€™t regret it, itā€™s the good stuff!!
    2
  4120. Oh yeah the new gen LTs follow them same pattern.
    2
  4121. I did, it will live on.
    2
  4122. Really?! That's awesome. They're for commenting
    2
  4123. Lol thank you!
    2
  4124. Ā @WizzRacingĀ  So there were no signs of a coolant leak or coolant consumption. The clean cylinder was #1 which did have misfires. Compression was good, but repeat compression tests had inconsistent results. I'm certain that a valve is sticking in number 1. Number 1 was also fuel soaked. I'm not too concerned about a fueling issue because all of the injectors are being replaced after I get the heads back.
    2
  4125. We donā€™t need them
    2
  4126. I just got wrecked! šŸ˜©
    2
  4127. How about a beer!
    2
  4128. Kid carrying muscles šŸ’Ŗ
    2
  4129. Wouldnā€™t be strong enough to handle the loads. Allthread isnā€™t made for ā€œshearā€ load (left and right forces) and would ultimately break
    2
  4130. Thanks for watching! šŸ˜‰šŸ¤™ And have a great day!
    2
  4131. šŸ‡²šŸ‡¦ šŸ‡ŗšŸ‡ø
    2
  4132. I donā€™t think so I read their work order and thereā€™s nothing on it about cooling hoses
    2
  4133. Copyright bs
    2
  4134. Yes
    2
  4135. He came in knowing the wire was broken and figured that was his problem. After I fixed the wire he was done spending money on it. It needed major work and time to figure everything out. I know it needed timing chains amongst other things.
    2
  4136. Me too, but my $10 iron is broken and in the trash.
    2
  4137. And thatā€™s how they get you!
    2
  4138. šŸ˜ nope
    2
  4139. šŸ¤£šŸ¤£šŸ‘
    2
  4140. Iā€™m here to notify you, that I have noticed, that youā€™re noticing me.
    2
  4141. šŸ¤£šŸ¤£šŸ¤£
    2
  4142. Tell Dad I say Hello! šŸ˜
    2
  4143. Better build that trans a little. Btw that would be amazing! I always wanted to do that with a 4.9 Cadillac engine (weird I know)
    2
  4144. That works too šŸ˜‰
    2
  4145. I broke one of those aluminum tabs once. But only once šŸ‘†
    2
  4146. I would humbly and graciously accept
    2
  4147. Itā€™s all CARB certified. EPA canā€™t get me, I donā€™t do deletes or emissions tuning
    2
  4148. I know what youā€™re saying! I spend a year in Michigan long ago
    2
  4149. They called me greedy and a sell out
    2
  4150. Weā€™re always thinking big
    2
  4151. Exactly! The old model is going to die
    2
  4152. Color doesnā€™t matter as long as it meets compatibility specs
    2
  4153. I fixed it
    2
  4154. Yes, we demand creature comforts, itā€™s like having a flat screen tv built into a washing machine šŸ¤£šŸ¤£šŸ¤£
    2
  4155. Isnā€™t it?
    2
  4156. Yea thatā€™s a real life technical term.
    2
  4157. šŸ¤£šŸ¤£šŸ¤£
    2
  4158. Ā @DrekulviinĀ  If thatā€™s all I do while drunk, yā€™all got off easy šŸ¤£
    2
  4159. Iā€™ll take criticism all day, thatā€™s fine. Criticism is how we improve. But flat out character bashing is where my line starts. The trolls choose their level of involvement from that point forward. šŸ˜ˆ
    2
  4160. But they can call me for add timešŸ‘šŸ˜‰
    2
  4161. Wonā€™t last longā€¦šŸ˜
    2
  4162. Be the change you want to see
    2
  4163. It does say inspection in the title šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤£šŸ¤£šŸ˜‚
    2
  4164. Thereā€™s only banjo music once you park the car on blocks and itā€™s been mowed around three times
    2
  4165. Itā€™s the insurance company tracker (you let them track you for six months and they give a discount)
    2
  4166. No
    2
  4167. Theyā€™re not all this easy, many v6 engines have to have intake manifold removed
    2
  4168. Iā€™m pretty good at giving options and helping customers make their own decisions with the best information possible.
    2
  4169. Unclick! Consider that one stolen šŸ˜‰
    2
  4170. I did title one ā€œnot clickbaitā€ once, it worked out well šŸ¤£
    2
  4171. I didnā€™t gap them, I just measured them
    2
  4172. Next time
    2
  4173. Lanes are more of suggestion around herešŸ˜‰
    2
  4174. šŸ¤£šŸ¤£šŸ¤£ Iā€™m going to use that
    2
  4175. Itā€™s no joke
    2
  4176. šŸ¤£šŸ¤£
    2
  4177. I try to avoid the giggity bc Customer States What Chanel uses it often. I donā€™t want to infringe too much. Homage to Dos Equis man ā€œ I donā€™t always giggity, but when I do, itā€™s with extra holes or a reach aroundā€
    2
  4178. I canā€™t make 2 hr videos šŸ˜
    2
  4179. I have edit out identifying parts of the songs. Break up large sections and change playback speed, or sing along off-key. I use imovie
    2
  4180. Get some sleep šŸ¤£
    2
  4181. Good thing I donā€™t gamble šŸ˜‰
    2
  4182. Catching a flight to SEMA 2022!
    2
  4183. I know! šŸ˜¬
    2
  4184. Ty!!! šŸ˜‰āœŒļø
    2
  4185. Iā€™ll weigh in on this since we have a discussion going, just to clear a few things up. I worked for the company that youā€™re all familiar with for just over a year. Iā€™ve done some 1099 work here and there (while still employed) Before that I was employed a local Dealership,for nearly 3 yrs. My automotive YT content started at the end of that employment chapter. (I did 1099 work back then too). Before that, I started a landscaping company servicing commercial/retail property like malls, gas stations retail stores etc. (Also doing 1099 mechanic work) Before that, I managed a retail auto shop that wasnā€™t on this continent. I wonā€™t tell you where bc someone will doxx them. Only reason I left is bc I stated having kids and we came back home. Before that I was part owner of another retail auto shop where I worked as a technician at my store, my partners ran the office and customer service. Folks that canā€™t ā€œkeep a jobā€ are those that donā€™t have anything to offer. Iā€™m pretty sure Iā€™ll be just fine with my own solo shop.
    2
  4186. One day Iā€™m sure of it
    2
  4187. Iā€™ll be back to check out more outside of the convention center! Thatā€™s enough for nowā€¦On my way home!
    2
  4188. It made 9lbs of pressure, so I knew it was running
    2
  4189. I did
    2
  4190. Nope I checked
    2
  4191. Ā @notavailable9919Ā  I checked, no accesses hole
    2
  4192. Had uploading issues today
    2
  4193. Refund is pending in your PayPal acct. you should see it within six billing cycles
    2
  4194. Ā @matth4069Ā  oh yea, that happened about six months ago when I was at the dealer
    2
  4195. No need to try it. Even if it were so full (the filter), that it had a flow problem, it would still have pressure on the other side. This pump only made 9 lbs.
    2
  4196. Iā€™m a very good editor šŸ¤£šŸ¤£
    2
  4197. We're hanging in
    2
  4198. Fiber optic and it's buried cable...crazy...No power tho, running a generator
    2
  4199. Theyre ok.They moved into the back porch
    2
  4200. I've been working nonstop for days. That's on top of preps done pre-season and on top of the long term prep status after the C0vid shortages
    2
  4201. I will lead them!
    2
  4202. Inside
    2
  4203. everyone is asleep except me. I'll rest when its over. Were ok
    2
  4204. I am
    2
  4205. still have internet for some crazy reason. Power is out and i have a generator going
    2
  4206. Just waiting till morning ā€¦. Got hit pretty hard with wind and 12-24ā€ rain. Itā€™s going to be different landscape tomorrow
    2
  4207. It really doesnā€™t matter, but itā€™s fun to win āœŒļøšŸ¤£
    2
  4208. šŸ˜³
    2
  4209. 3m makes it I dont know the PN or model name
    2
  4210. Quite accurate šŸ¤£
    2
  4211. Eric sold me the brake clean sound months agošŸ¤£šŸ¤£
    2
  4212. šŸ¤£šŸ¤£šŸ¤£ youā€™re not wrong
    2
  4213. No oxygen in the tank
    2
  4214. What do mean? Example?
    2
  4215. Ouch. Sorry you found a problem on a new to you car šŸ˜­
    2
  4216. Right! It sounds so dumb
    2
  4217. I was waiting for someone to catch that
    2
  4218. Thatā€™s what she said, fell asleep. I dunno the speed. I guesstimate it was 10-15 mph
    2
  4219. Because I misspoke and didn't notice when editing
    2
  4220. They scrapped it. Even at junkyard engine prices they were done spending money on it.
    2
  4221. Itā€™s ok. Itā€™s just the program login for winalign
    2
  4222. That would be the beauty of it. I can do whatever I want.
    2
  4223. ā˜ŗļø
    2
  4224. Ha, ha ha not a chance, those are designed to prevent gas from coming out of them at all
    2
  4225. And I donā€™t want to get it dirty
    2
  4226. Noooo Iā€™m not. I just have many hats
    2
  4227. Itā€™s two videos old
    2
  4228. We shall see
    2
  4229. Lol I should drive this over there see what cleetus can do with it
    2
  4230. Closer to Jr year
    2
  4231. Ā @JohnKay3058Ā  My issue is that the fender covers sometimes have metal embedded in the cloth from the wash process and if you lean on them it scratches the paint. I realize that they have thick vinyl ones with magnets in them also. I just prefer to be careful without the cover. Iā€™ve scratched more paint with covers than without.
    2
  4232. Fender covers scratch paint , and I do not
    2
  4233. Itā€™s all CARB compliant šŸ˜‰. Besides theyā€™ll need a warrant if they want to come over
    2
  4234. I have legal disclosures and permission to make content from everyone who has their cars on the channel šŸ‘šŸ‘
    2
  4235. I have one in one of the doors, itā€™s a roll around unit
    2
  4236. Someone custom made it, I dunno where theyā€™re sold
    2
  4237. Heā€™s my new guy!!
    2
  4238. I sell products to my customers all day long long, why not sell them to viewers, they buy oil too
    2
  4239. Thank you!!!!!
    2
  4240. Happy birthday!
    2
  4241. Totally by coincidence
    2
  4242. Compete coincidence
    2
  4243. That was never the plan šŸ¤£šŸ¤£
    2
  4244. It was a fella from a dealership that was helping out with the pentastar that had the codes after lifter replacement
    2
  4245. Itā€™s Iā€™d say disconnect them. It couldnā€™t hurt, it it were me, Iā€™d disconnect to prevent a discharge
    2
  4246. I really do own a cable crimp set, but technically you are indeed correct
    2
  4247. Oh yea, I love it
    2
  4248. No
    2
  4249. I was pointing at that van šŸ¤£šŸ˜‰
    2
  4250. Lol do as I say not as I do šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  4251. Sticky business model
    2
  4252. nope, not my Alldata package. They might have a version for powersports. Ive never looked into it
    2
  4253. Theyā€™re reserved and in use
    2
  4254. I dont have the manual
    2
  4255. Youā€™re missing the point
    2
  4256. Comes in past the window when it rains. They all do this beggars you just canā€™t create a perfect seal. So there must be little drain holes at the bottom of the doors. These ones became clogged with debris and the water pooled up over time.
    2
  4257. Noooooo, I billed $25. Most of us aren't crooks. But the ones who are make us all look bad.
    2
  4258. Nope... Just $25 no need to rob people
    2
  4259. Rain water always makes it past windows on the outside, and into the doors. Those drain holes are there to let it out. Those holes get clogged with dirt and pollen and then over time the door will fill up. Real common on FL
    2
  4260. Ā @karthiksv8628Ā  Oh no offence taken at all. Thanks for watching!
    2
  4261. I wouldnā€™t. If it broke as one solid piece, Iā€™m sure it would have broken again as two pieces
    2
  4262. The stupid pump is already broken šŸ˜”
    2
  4263. You missed it
    2
  4264. "If it aint broke..."
    2
  4265. Wouldnā€™t have her around during this type of activity. Thereā€™s always a potential. Sheā€™s not allowed under/ near the lifted cars either
    2
  4266. Weā€™re not going to talk about that right now
    2
  4267. Band clamps all day!!
    2
  4268. Ā @ozziecrosby2092Ā  It doesnā€™t even, I want a clean tune, rolling coal is lost power and wasted fuel. Iā€™m going to waste my fuel towing trailers
    2
  4269. Loud pipes save lives šŸ˜‚šŸ˜‚
    2
  4270. I almost gave up hope!
    2
  4271. It will run just fine, but it needs a tune to get that sound on startup. (ECM controls the veins in the turbo)
    2
  4272. No need to sneakā€¦I do what I want!! Edit: I really hope that wife unit doesnā€™t see this one
    2
  4273. Whaaaattt! Y not?
    2
  4274. During the moment that itā€™s sticking, open the bleeder valve to relieve pressure at the caliper, if it doesnā€™t release, itā€™s the caliper. If it does release itā€™s the hose. (I know I didnā€™t include that step in the video)
    2
  4275. Heā€™s here, been busy lately
    2
  4276. Donā€™t give him any more ideas šŸ¤£šŸ¤£
    2
  4277. Itā€™s a Cree, I dont know the model. Cree makes excellent blades
    2
  4278. That would have been epic šŸ¤£šŸ¤£šŸ¤£
    2
  4279. Twas Unlisted for a few days
    2
  4280. Not really, itā€™s pretty far gone!
    2
  4281. Perhaps. But thatā€™s easier said than done
    2
  4282. One is already on her van šŸ™‚
    2
  4283. I got it šŸ˜‰
    2
  4284. šŸ˜‰ we worked hard at it
    2
  4285. Sure did
    2
  4286. Snap on extension sockets. Look for them on eBay if you donā€™t have access to a snap On dealer
    2
  4287. Ā @Bryan-HensleyĀ  Snap On- not Snap Off! šŸ¤£ I did break one ratchet though šŸ˜¬
    2
  4288. Ā @jaykoernerĀ  I didnā€™t even consider it, those things were sooooo tight. I need I had applied 400ft/lbs on those nuts and they didnā€™t budge, plus I think all my hex and torx bits would break at that kind of force
    2
  4289. Ā @electric_swayĀ  wheeew! I almost thought you were a snowflake for a moment! šŸ˜‚
    2
  4290. Tell me youā€™re joking? Please educate me. How would you remove those lug nuts? Did you not see the condition of the lug nuts when the car arrived? I was fixing serious damage to the lugs and studs, without damaging the $800 wheels
    2
  4291. It had already been tried by the guys before me, then they tried lug removers that damaged the nuts and a socket worthy go back on. The thing I was hammering on was a lug remover that cut into the steel to grip onto it. I donā€™t use an impact on those. Besides, a breaker bar out long ratchet will apply more force then an impact gun.
    2
  4292. SRQ buddy
    2
  4293. I'll leave a note with the oil to see if they test for roach
    2
  4294. Ws just checking to see if relay was stuck open. Swapping them is an easy ā€˜process of eliminationā€™ test
    2
  4295. BC I wipe my palms and wipe off interiors after service
    2
  4296. 1st amendmentā€¦Troll on!!
    2
  4297. well yea
    2
  4298. Me too, but fear will consume you. Have no fear, we'll get through this!
    2
  4299. Ā @MikeL-FLĀ  ohhh you weā€™re one of thoseā€¦.šŸ¤£. Bro I feel I can proudly say that during the vid TP panic buying, I never bought one roll. We had our stock from that years storm season
    2
  4300. Just emptied out the shop in case itā€™s not there in Thursday
    2
  4301. Not this year
    2
  4302. It was a jokeā€¦ watch more than 30 seconds plz
    2
  4303. You missed the next scene where I said that the pan is being replaced šŸ˜‰šŸ¤£
    2
  4304. šŸ˜‰
    2
  4305. You should probably watch the next 30 seconds of the videoā€¦I forgive you šŸ˜‰šŸ¤™
    2
  4306. Gotcha! šŸ¤£
    2
  4307. I cut out a bunch of the torquing it was really boring
    2
  4308. Mikeā€¦ I replaced the oil pan. You have been trolled
    2
  4309. Youā€™re right! Iā€™d never do something like that to a customer! Plus my company would 100% terminate my existence for such a thing. Heck, Iā€™d terminated myself
    2
  4310. It was at the far end of the shaft, not in the right position
    2
  4311. Please watch more than the first 30 secondsā€¦ youā€™ll see that u I was trolling. The pan is being replaced šŸ˜‚šŸ˜‚šŸ˜‚šŸ¤™
    2
  4312. No I found them like that
    2
  4313. Yay!
    2
  4314. I was very close today šŸ˜†
    2
  4315. Yea pretty much
    2
  4316. So am Iā€¦the owner and insurance people have to settle b4 theyā€™ll talk to me about it.
    2
  4317. Ā @rockyhorror1969Ā  I canā€™t say Iā€™ve ever had a problem with it and Iā€™ve been washing engines for years. Iā€™m not saying you can pressure wash fuse boxes, but a spray down is perfectly fine.
    2
  4318. šŸ‘‹
    2
  4319. I didnā€™t cash a check for thisā€¦ so NO. There were no asses kissed in the making of this video.
    2
  4320. 808 šŸ’Ŗ
    2
  4321. No itā€™s just cut flush with the end plate
    2
  4322. I fear the day that they become the independent young adults that I'm trying to raise them to be, they will leave the nest and take on the world, it's will be so bitter sweet! šŸ„¹
    2
  4323. šŸ™Œ
    2
  4324. She's the real hero behind all of this!! 100%!!!
    2
  4325. He just did that when I was out sick, Dave needs a vacation next!
    2
  4326. So many men have done this. We put our need to provide ahead of everything because we believe weā€™re doing the right thing. Our wives and children donā€™t understand. I make sure to avoid it. Lauren and I were close to falling apart more than once over working! Working bell to bell 6 days a week for years will take a family apart.
    2
  4327. And maybe I canā€™t, fortunately for me that crowd doesnā€™t appear to watch many of my videos. most of them canā€™t afford to pay attention let alone pay for car repairs
    2
  4328. But I will šŸ˜
    2
  4329. Ā @oo7warriorĀ  Iā€™m saying that the sticker conflates patriotism with racism. And thatā€™s not okā€¦ real American patriots do not claim the racists. We love our country and the people of our country. Skin color is irreverent with regards to patriotism! šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    2
  4330. Ā @hdtvcamera1Ā  Right here šŸ’ÆšŸ‘†
    2
  4331. No they get charged big time regardless, United I find a major during the inspection
    2
  4332. Oh itā€™s coming down today! Everything is flooded. šŸ¤£ weā€™ve had Hurricanes that were easier šŸŒ§šŸŒ§ā›ˆšŸ’§šŸ’§šŸ’§šŸ’§
    2
  4333. Mine are blue point made by Snap On, and the offset ones are are Matco. Lol youā€™re right, everything is racist! Clearly people do understand history these days. We had major civil rights problems 60 years ago. Those days are over, thatā€™s why I say racism is dead. My little comments in my video today was a litmus test and they went full reeeeeeeee on me in a matter of seconds. Itā€™s a damn same shame!
    2
  4334. Snap on makes it. Itā€™s the 3/8ā€ drive long shank version. 14.4v
    2
  4335. šŸ¤£šŸ¤£šŸ¤£
    2
  4336. I concur crappy parts
    2
  4337. This is so true you gotta take care with it otherwise it gets damaged
    2
  4338. Negative, the majority of automotive fasteners are instated without lubricant.
    2
  4339. Mine is a Snap onā€¦Milwaukee makes a comparable ratchet also
    2
  4340. I didnā€™t use the torched bearing i needed the steering knuckle
    2
  4341. Looks like I discovered the 3rd rule of the internet. No fire on camera! šŸ¤£
    2
  4342. I heated the junkyard bearing, and reused the original. The goal was to replace the bent knuckle
    2
  4343. I donā€™t like touching aluminum Jaguar parts
    2
  4344. Thatā€™s the one!
    2
  4345. This axle cost $3200 for a reman assembly with a $1500 core charge. Rebuilding it with a new diff will come to $2300.
    2
  4346. Did this Saturday, everyone was off and we were closed.
    2
  4347. 100%!
    2
  4348. It's totally a Super Sport at this point
    2
  4349. I donā€™t want chrome or polished so the Alcoas are out, I was considering some steel 19.5s but I donā€™t want it to ride like a brick. Wheels are far down on the list of renovations
    2
  4350. Iā€™m driving WifeUnits minivan
    2
  4351. Thereā€™s a screw in there sometimes
    2
  4352. I actually throw desiccant packs from packaging in my box drawers but this week has been unusually humid due to Florida being underwater
    2
  4353. Not reallyā€¦ everything is off. Cooked meat smells terrible to me right now. Itā€™s still changing, I hope it goes back to normal eventually Stupid bio weapon
    2
  4354. Iā€™m already insane šŸ¤£šŸ¤£
    2
  4355. More brake clean!!!
    2
  4356. $3-8
    2
  4357. But youā€™re right, itā€™s risky
    2
  4358. Hour labor $125 16qt fluid $160, Some cleaner and additive $40 plus taxes. Boom $350 happens fast
    2
  4359. Hahaha. I am a robot!
    2
  4360. Yes it was hiding from view behind the sway bar
    2
  4361. Yea I didnā€™t use YouTubeā€™s catalog, I found out itā€™s rather glitchy
    2
  4362. Absolutely!
    2
  4363. Yes this will make anyone who is uninitiated at the moment look at you weird BFs included!
    2
  4364. Itā€™s called the Super Scraper (brand Name) Itā€™s a machined flat carbide bit specifically designed for gasket surfaces. I like it better than a razor blade
    2
  4365. On the fill plug
    2
  4366. I can always count on you Sam!
    2
  4367. Ok! Iā€™ll just get a new one without you in it šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  4368. Whaaat?!! Illegal to terminate pests?? Call me an outlaw then šŸ¤£šŸ¤£šŸ¤£šŸ’€
    2
  4369. Check out the Pt 2, It's not ok
    2
  4370. Not everyone knows šŸ¤« And itā€™s not broken the belt is still there
    2
  4371. Gearwrench check p/n 82208 (that could be the patent number but itā€™s the only one on the tool) They came as a set of 3
    2
  4372. Doesnā€™t have one, just sealant. It a very common practice
    2
  4373. I donā€™t usually place them, I leave that up to the algorithmā€¦. And itā€™s never enough šŸ˜‰
    2
  4374. I dunno šŸ¤·ā€ā™‚ļø I canā€™t think of anyā€¦ plus my bias shows
    2
  4375. I lost it šŸ˜­
    2
  4376. Meh
    2
  4377. Challenge acceptedšŸ¤£
    2
  4378. Yes
    2
  4379. I found that if installed properly they donā€™t fall off
    2
  4380. Itā€™s becoming a lost artā€¦ā€ itā€™s all in the green ā€œ so they say. I miss the days where the machine only have us a numerical measurement
    2
  4381. lol thatā€™s just to open the aligner program, no security risk to the network
    2
  4382. Because Iā€™m old school and I prefer reading the numbers.
    2
  4383. Canā€™t do it, itā€™s just the lingo
    2
  4384. I have one, needs to be assembled
    2
  4385. Was done before I got here
    2
  4386. Itā€™s 95% metric in most things Automotive
    2
  4387. They normally do it while driving. In situations like this they have to be manually initiated.
    2
  4388. Itā€™s all about scales. The kelvin scale references absolute zero meaning zero has all heat energy removed. Celsius referred to a scale based on water and its change of state. Zero degrees being freezing to a solid and 100 degrees from liquid to a gas. Fahrenheitā€™s scale refers to temperature as it relates to the human bodyā€™s tolerance to temperature extreme. Example we donā€™t tolerate temps below 0 or above 100 degrees. I just learned that a few months ago and Iā€™m glad I got to share it šŸ˜†
    2
  4389. Iā€™ll work on those too.
    2
  4390. I have another liftā€¦ thatā€™s how. Prolly adding more lifts in the future
    2
  4391. Shhh šŸ¤«
    2
  4392. šŸ’ŖšŸ†
    2
  4393. You bet!!
    2
  4394. Scan tool showed it at the end
    2
  4395. Whaaaaa, Iā€™ve had that puller since 2010
    2
  4396. He quit a few weeks ago, had other priorities
    2
  4397. Did I leave one of those???? Oops šŸ¤·ā€ā™‚ļø
    2
  4398. I embrace my inner child
    2
  4399. Do it! We will start a new trend! Reeeee!
    2
  4400. Viewer sent it to me, adds to my decor
    2
  4401. šŸ‘
    2
  4402. I do!
    2
  4403. Viewer sent it to me, adds to my collection of decor
    2
  4404. They kinda donā€™t NEED to be there, but itā€™s just best practice
    2
  4405. Gotchaā€¦ saved it for the end
    2
  4406. Replacing the biased 02 got it right, the plugs finished the job
    2
  4407. Ya caught me on my own video šŸ¤£šŸ¤£
    2
  4408. Just a little šŸ˜
    2
  4409. The front shaft at the stranger case was spinning, and the transfer case went in to Lo rage (gear ratio change)
    2
  4410. Couldnā€™t find an FJ image šŸ¤·ā€ā™‚ļø
    2
  4411. It was till I ran it over
    2
  4412. It sounds great and the filter is HUGE
    2
  4413. Monday sucks
    2
  4414. Iā€™ll change it when I replace the other hose
    2
  4415. Ā @tedmitchell226Ā  I think its the compressor, I was the needle bouncing after the condenser install (the pressure went down confirming there was a restriction)
    2
  4416. Ā @tedmitchell226Ā  It was 1.6
    2
  4417. Out in desert?
    2
  4418. We can talk about that later
    2
  4419. šŸ˜
    2
  4420. Ā @stanSniderĀ  šŸ¤” They can probable be extracted by welding a nut to the broken bolt, 12-15 hrs is on the high side
    2
  4421. The motor sounds a little off but still going
    2
  4422. Heā€™s too far
    2
  4423. I like how we donā€™t manufacture products in the us where we have strict pollution regs, then we outsource out manufacturing needs to China, who has little or no environmental regs, they they built / and pollute over there, the. Then the pollution gets caught by the jet stream and is carried over here anywayā€¦we lose twice
    2
  4424. šŸ˜šŸ‘
    2
  4425. šŸ¤£
    2
  4426. šŸ˜³ā€¦..šŸ¤£
    2
  4427. It seems I have missed something. šŸ˜¬ I thought that they had good coffee and nice pew pews
    2
  4428. šŸ¤£
    2
  4429. Not as easy as one may assume
    2
  4430. šŸ˜³ what did I miss!!!??
    2
  4431. This morning I have realized the bitter truth
    2
  4432. It appears my option may be inaccurate ā€¦the reeeee is thick today on BRCC
    2
  4433. Check link in pinned comment, this is a follow up vid
    2
  4434. I knowā€¦ right? šŸ¤£
    2
  4435. Do de dooo dooo!
    2
  4436. Yesssss!
    2
  4437. Here
    2
  4438. Iā€™m doing that tomorrow
    2
  4439. Ā @andrewcastiglia9548Ā  I donā€™t worry about things that are out of my controlā€¦it serves no benefit. āœŒļø
    2
  4440. Ā @andrewcastiglia9548Ā thereā€™s are also some hot topic issues going on too. Multiple wars, the boarders and the insanity of modern politicsā€¦.car videos are lower in peopleā€™s priorities
    2
  4441. I line up the nuts with the marks that were left from the first install
    2
  4442. šŸ˜‰šŸ˜‚šŸ‘
    2
  4443. No the guy towed it away šŸ˜” complete bummer
    2
  4444. I think it was a tires plus once
    2
  4445. šŸ«‚
    2
  4446. Contra cheat codes boyeeeeee šŸ¤£šŸ¤£šŸ¤£
    2
  4447. I need to get the axles out for a jeep
    2
  4448. Hereā€™s the no fun answer, it pays for the waste oil disposal.
    2
  4449. šŸ˜³ I forgot to edit it
    2
  4450. Heā€™s already back! 1 day flu-rona
    2
  4451. The family has owned a cottage up in the woods since the 70s
    2
  4452. My mailbox
    2
  4453. LOL oh those? They have been accumulating in a drawer for years, decided to take them home
    2
  4454. All good. I had 30 more miles to go
    2
  4455. I didnā€™t sell anything! šŸ˜‰ letā€™s just seeā€¦it could be a lead/sulfur additive. Iā€™m thinking about some lab testing
    2
  4456. I got it from tractor supply. Its a 90gal "L" shape that has space for a toolbox. I have a diesel tractor and generator so its really nice to have the extra tank. Plus I get to bu yfuel when i see its a lower price and have reserves for price peaks. For my situation it was a justifiable purchase.
    2
  4457. i didnt know that
    2
  4458. šŸ˜
    2
  4459. Because people 1: donā€™t know about it 2: theyā€™re selfish
    2
  4460. How did that get there?
    2
  4461. They also claim that itā€™s just as effective in gasoline engines as well.
    2
  4462. Ā @gdcatalyst7812Ā  If you do find a manual D Max you let me know!
    2
  4463. I love the Allison 1000 trans thatā€™s behind the D max. If I could Iā€™d have a Cummins/Allison combo. The Cummins isnā€™t as wide either because itā€™s an inline configuration. The v8 revs higher and the I6 Cummins has more torque. Edit: I donā€™t like dodge bodyā€™s or interiors (especially the dash if it hasnā€™t fallen apart)
    2
  4464. Yes
    2
  4465. Update lag
    2
  4466. Ā @KendrasEdge757Ā Intotally understand your definition as well! šŸ‡ŗšŸ‡øšŸ’ŖšŸ’Ŗ
    2
  4467. One burnt out and I have replaced it yet šŸ˜
    2
  4468. Ā @DorsetSaferRoadsĀ  I forgive you. We rate our truck by load/weight capacity. 1/2ton rated for 1000 lbs load capacity 3/4 ton rated up to 1500lbs capacity and 1 ton rated for 2000lbs capacity. Actual capacity limits are variable and numbers are approximate but you get the picture
    2
  4469. Itā€™s a circle of life šŸ˜†
    2
  4470. I never have. Iā€™m sure thereā€™s a reasonable level of understanding regarding the cops. Depending on why you were stopped. Traffic violations, thatā€™s on us. Registered owner has warrants or something they may follow back to the shop.
    2
  4471. Donā€™t put that evil on me
    2
  4472. channel page, "about" tab has my PO Box. Thanks to you William!
    2
  4473. yup I didn't proofread my work, now I've published a typo ....reversed
    2
  4474. Oops auto type got me again
    2
  4475. The bar is low
    2
  4476. the filter will catch them
    2
  4477. I spent some time in Michigan and Ohio šŸ˜‰ in past life
    2
  4478. I'll tell you two things that will confirm we are the same. At 10 years old I connected several 50 ft wooden ladders together and propped it against the roof of our barn,(I'm talking the peak of the roof not the low section) bracing it with 2x4s and nails. I then proceeded to ride a sled down the ladders wearing a motorcycle helmet for safety. By 12 years old my cousin and I were strapping Estes model rocket engines to Barbie cars and shooting them down the road. We had the red and pink 80s corvettes. I also know how to extinguish a corfield fire.
    2
  4479. Wind blew her over. It has been fixed
    2
  4480. Wind blew her over. Itā€™s been promptly addressed! This one has been decommissioned and scheduled for proper disposal. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    2
  4481. Wind blew it over. Itā€™s being retired properly soon. This one has some tears in it šŸ‡ŗšŸ‡øšŸ˜ž
    2
  4482. šŸ¤£šŸ¤£
    2
  4483. Iā€™ll fix it
    2
  4484. Ā @SeurationĀ  thatā€™s why heā€™s pinned šŸ˜‰ Canā€™t have people running around spewing verbal vomit all day with no consistencies šŸ¤£
    2
  4485. I used to do landscape work in another life
    2
  4486. Weird right!!??
    2
  4487. pretty close, Diesels you gotta pay to play
    2
  4488. It depends if the camshaft journals are scored from low oil pressure
    2
  4489. Itā€™s patent pending
    2
  4490. My brain doesnā€™t think of things life that. Viable solution indeed. Just never occurred to me
    2
  4491. This sounded ridiculous the first time I heard it. And I thought it absurd the first time I saw it. Manufactures are building ac lines as one piece (line within a line). I think they do it to reduce space thatā€™s needed and probably to have a smaller parts count.
    2
  4492. I don't have one for the big filters pliers for commercial filters yet. Mike at JM3 is super busy as he makes them by hand. Mine is on the way!
    2
  4493. REAL CAT engines??? You had to take that from me huh? šŸ˜¢
    2
  4494. That canā€™t be right. It threaded on great, it never would have tightened if it wasnā€™t the same size
    2
  4495. Smart azz šŸ˜‚šŸ˜‚
    2
  4496. YES that EXACTLY what happened!
    2
  4497. I swear it wasnā€™t as bad as it looked, the wrench was slipping on the filter šŸ˜‚šŸ˜‚šŸ˜‚
    2
  4498. Ummmmm. Ya got mešŸ¤£šŸ¤£
    2
  4499. You couldnā€™t resist āœŒļøšŸ˜‰
    2
  4500. Iā€™ve had them fail time and time again. Plus I have encountered Counterfeit actuators inside of a doorman box. I realize the counterfeits are not doormanā€˜s fault however the quality of some of their parts has drastically diminished over the years.
    2
  4501. Hi Roger!! šŸ‘‹
    2
  4502. Waiting for connecting flight to Srq šŸ„±
    2
  4503. I think my planned exit was discovered
    2
  4504. Fun isnā€™t it šŸ¤£
    2
  4505. Itā€™s all good on my end my friend! šŸ™‚
    2
  4506. Noooā€¦ be cool šŸ˜Ž
    2
  4507. šŸ¤£šŸ¤£šŸ¤£ silly haters
    2
  4508. šŸ¤Ø
    2
  4509. Agree šŸ’ÆšŸ‘†šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø Letā€™s all be civil here
    2
  4510. There's always two sides to every story...sometimes three
    2
  4511. Toxic traitsā€¦ my problem is I just piss people off. No sugar coating from me
    2
  4512. I have a big mouth
    2
  4513. I spent 2015 in Mililani, Oahu. I dont know if my In-laws are going to allow it a second time ā˜ŗļøšŸ‘
    2
  4514. šŸ¤£šŸ¤£šŸ¤£šŸ¤£ I took my lights too
    2
  4515. My big mouth knows no limits. See, my problem is not that I have a problem with authority, I simply fail to recognize it, and I don't sugar coat.
    2
  4516. Ā @TruckerChickĀ  the part that sucks, is that you find out who your friends are
    2
  4517. Stick around! Iā€™m not done yet ā˜ŗļø
    2
  4518. No
    2
  4519. Heā€™s pretty far away. šŸ˜ž
    2
  4520. šŸ¤£
    2
  4521. Snow šŸ˜…
    2
  4522. Weā€™re you there the whole time šŸ¤£šŸ¤£šŸ¤£
    2
  4523. Itā€™s a 20yr collection
    2
  4524. Iā€™ll get a new one later so we can make fun of it again
    2
  4525. Theyā€™re everywhere!
    2
  4526. Donā€™t we all? šŸ¤£
    2
  4527. Report those fools!!!! I'll keep banning them
    2
  4528. Later
    2
  4529. I read those too, I canā€™t find any literature on that in alldata. I could be 10000% wrong and I just wasted some PCM $$. If thatā€™s the case I pad $200 for an education
    2
  4530. No itā€™s still there, search Lotus compressor on my page
    2
  4531. I couldnā€™t help myself šŸ¤£šŸ¤£
    2
  4532. Itā€™s taken years to organize this šŸ¤£šŸ¤£
    2
  4533. Depends, thereā€™s an bunch of fake accounts. YTT is linked in my YT video descriptions.
    2
  4534. Electric power steering for the hybrids
    2
  4535. My tone said enough šŸ¤£šŸ¤£
    2
  4536. Sheā€™s editing now
    2
  4537. I see you
    2
  4538. The lift arm was touching the bottom of the body but not holding weight. The car vibrated slightly when running bc it was clanking against the arm and making it rattle šŸ˜ˆ
    2
  4539. I keep them for other cars šŸ¤£
    2
  4540. I did. Look at the last 30 seconds of this video
    2
  4541. It was the misfire on 7 that killed it, the pass side might have some damage but itā€™s not causing an issue so we let it be for now
    2
  4542. I do that often with two cams. Sometimes I can use the footage, sometimes not. Itā€™s 20 something minutes of footage for 12 seconds of screen time.
    2
  4543. Very dangerous slopes on in PA !!!!
    2
  4544. 7-8 minutes per cut
    2
  4545. Yo it was cheap I got it donešŸ¤·ā€ā™‚ļøšŸ«”
    2
  4546. Ok
    2
  4547. I canā€™t be Eric . Eric is Eric. But I can plug his channel when he sends me his brake clean can soundšŸ˜
    2
  4548. reeeeeeeeeeeee!!!
    2
  4549. Itā€™s for towing a gooseneck trailer. The big notch is to give the trailer hitch space. I donā€™t have a gooseneck trailer but the truck came with the receiver and tailgate.
    2
  4550. Ā @Stevo_1998Ā  itā€™ll be ok, not much can be done with a tag #
    2
  4551. Shout out to the 808!
    2
  4552. We still have the blue ones
    2
  4553. Negative, I havenā€™t worked on this specific van. However thereā€™s a fleet of about six of these that we service
    2
  4554. I confess, I shot this one several days ago. Only had one injury šŸ˜‰
    2
  4555. Thatā€™s why I wanted to do, but the guy wasnā€™t interested
    2
  4556. Plug wires backwards on cylinder 2&3, remember the google eyes
    2
  4557. Florida
    2
  4558. Just plug wires backward in 2&3
    2
  4559. šŸ˜‰
    2
  4560. Sure wereā€¦drum in disc are for the parking brake
    2
  4561. Reeeee!
    2
  4562. I think the whole concept could have been done better across all manufactures that attempted the styles. SSR HHR, pt cruiser, prowler etc. they all looked great but ended up being anemic matchbox cars
    2
  4563. Sure did
    2
  4564. They have a extra long ratcheting set 10-19mmā€¦$189.00
    2
  4565. Occasionally it doesā€¦and I be like šŸ˜
    2
  4566. The new Silveradoā€™s and Sierraā€™s hold 8 qt
    2
  4567. Always šŸ˜‰
    2
  4568. Because theyā€™re still paying off the one they have
    2
  4569. Simple really, I make videos of what Iā€™m doing, I record during the day and after the kids go to bed. I had to give up TV and videos games tho
    2
  4570. $15 per rotor, he brought them in loose and I didnā€™t have to do any extra work in them.
    2
  4571. Ok
    2
  4572. Magnet style is what I like
    2
  4573. Iā€™m 40 not really gen x and NOT a millennial
    2
  4574. Ac compressor blew up and weā€™re getting the wheels powder coated
    2
  4575. You totally cheated šŸ¤£
    2
  4576. Troy says hi ā˜ŗļø
    2
  4577. Sheā€™s getting pressure washed later. Thatā€™s also why Iā€™m not terribly concerned about the oil that got onto the belt
    2
  4578. Thank you mark šŸ¤™
    2
  4579. Indeed. Humidity is high and theyā€™re uncomfortable
    2
  4580. ABS/wheel speed sensor
    2
  4581. Amazon link in description for the pliers Bacho Brand (snap on rebrands them)
    2
  4582. Air tools are cumbersome. I still own several, they come out of more power is needed
    2
  4583. Lost like I forgot to post it? Or lost like it's unorganized. It's still unlisted right now and only available in the playlist. I like easter eggs and hidden features. It'll be live this weekend.
    2
  4584. I used the force
    2
  4585. Itā€™s around the same time as the wrecked Ram. But youā€™re right, the body shops are never in a rush. Iā€™ve seen them have a car for months.
    2
  4586. Bc they didnā€™t have any
    2
  4587. Glad youā€™re here!! šŸ˜‰
    2
  4588. We will see what the testing in my DURAMAX says about extended life oil and extended intervals
    2
  4589. Email us and we can send you some.
    2
  4590. Ā @AlfieArmaniĀ  I made this one with Canva. Take picture, upload, put words over picture = thumbnail
    2
  4591. Yes
    2
  4592. šŸ˜‚šŸ¤£šŸ¤£
    2
  4593. šŸŖ
    2
  4594. šŸ¤£šŸ¤£šŸ¤£ killin me
    2
  4595. It takes the edge off I like it!
    2
  4596. šŸ¤£šŸ‘
    2
  4597. Negative, the drilled and slotted type canā€™t be machined on a brake lathe. Iā€™ve tried and it doesnā€™t work very well. I suppose a machine shop with the tools for flywheels could resurface them.
    2
  4598. Check description and pinned comment, itā€™s already there
    2
  4599. Thanks! šŸ‘
    2
  4600. yea i let one slip ever now and then. That's how you can tell that I'm not a paid actor
    2
  4601. šŸ‘šŸ‘šŸ˜
    2
  4602. šŸšØšŸšØšŸšØHydroplaning Honda! https://youtu.be/DPI_ti3fUJI šŸšØšŸšØšŸšØ
    2
  4603. Ā @mjkloet7410Ā  yea warranty company doesnā€™t approve boots as a fix
    2
  4604. Aftermarket warranty company only does full axle replacements. Think about it, all the grease was flung out and the joint was running without lubrication. You were saying?
    2
  4605. It was in this case, the newer modules have to be set up in site
    2
  4606. It was just an intake air temp sensor. To the PCM didnā€™t notice anything too far out of range for the time it was not connected. Good eye!
    2
  4607. Naaah itā€™s fine
    2
  4608. must have been a new guy
    2
  4609. I think I already have too much
    2
  4610. I like it!
    2
  4611. Ā @kenore4003Ā  Iā€™m going be so mad if itā€™s a fuse šŸ¤£
    2
  4612. I get my political digs in when I can šŸ˜‰
    2
  4613. Bc those donā€™t work on steering gear shafts
    2
  4614. Too busy with the door falling off šŸ¤£šŸ¤£
    2
  4615. Thereā€™s a bunch of them canā€™t stop it
    2
  4616. Over budgetšŸ¤·ā€ā™‚ļø Not my call
    2
  4617. Iā€™m cultured in the ways of the gen x era
    2
  4618. No I do notšŸ¤£šŸ¤£
    2
  4619. Itā€™s in the playlist šŸ˜‰
    2
  4620. Ā @GargettScotland2KĀ  ooh big negative. Not my van
    2
  4621. The customer
    2
  4622. Iā€™ve experience a very high failure rate this year ā€¦thatā€™s a new development
    2
  4623. Agreed
    2
  4624. Thats awesome! So glad you enjoy the content!
    2
  4625. Glad I could help!
    2
  4626. There is a switch that turns on a warning if water is detected in the fuel.
    2
  4627. lift pump next for sure
    2
  4628. I have some vents that use CPU fans to pull air
    2
  4629. It's bigger and it filters better then aftermarket filters and costs less than a OE filter (if they're available anymore)
    2
  4630. In the works šŸ˜‰
    2
  4631. The alternator does not send tach signal, ever
    2
  4632. negative, there is plenty of clearance between the adaptor and the filter holes for the fuel to flow
    2
  4633. Yes the transfer tank in the bed also has a filter
    2
  4634. Didnt make a video on that one
    2
  4635. Oil pressure gauge sending unit code
    2
  4636. Glad youā€™re here! āœŒļø
    2
  4637. And thatā€™s why I will take over the world
    2
  4638. I never saw this truck again šŸ¤·ā€ā™‚ļø
    2
  4639. šŸ˜
    2
  4640. Waiting on the insurance people
    2
  4641. Got cha!!!
    2
  4642. Ā @corvettebob96Ā  I feel your plight! Itā€™s amazing how someoneā€™s ā€œidealā€ version of a situation can be so disconnected from basic realities.
    2
  4643. I think I just cleaned up a bit off camera.
    2
  4644. Iā€™ve used that tool before and I DO NOT like it. The software design just rubs me wrong
    2
  4645. Iā€™ll do the job and pt 2 this week
    2
  4646. agreed!
    2
  4647. HAHAHAHA NOT a chance
    2
  4648. Soon
    2
  4649. I think I just threw their rhetoric in their face and the viewers just hit them with the ratio phenomenon. Looks like a win from my POV šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ’Ŗ
    2
  4650. Call him, his number is the video.
    2
  4651. Welcome back!šŸ’Ŗ
    2
  4652. Yea I know, but I have to make sure the Google overlords canā€™t get me šŸ˜‰
    2
  4653. Thatā€™s we a while ago, maybe 18mo ago. I donā€™t know what video it was in. I believe it was on a ford ranger.
    2
  4654. A real Christian would not cast anyone away.
    2
  4655. Thatā€™s xtra funny right now BC Iā€™m on a boat šŸ›„ļø
    2
  4656. Anti arson is not a political view
    2
  4657. Happy Birthday!!!
    2
  4658. I noticed. I was using a different drop light under the hood this time.
    2
  4659. And my coolant meets Dexcool Specs
    2
  4660. Itā€™s funny to watch šŸ¤£šŸ¤£šŸ¤£
    2
  4661. Yes i want a 4 post alignment machine. Dual purpose, it's a large rack and a WA machine...big bucks tho
    2
  4662. Iā€™ve never had a problem with it. If youā€™re going to overflow the master just suck some fluid out with a turkey baster
    2
  4663. Thatā€™s annoying!
    2
  4664. You said it! Emissions!
    2
  4665. Ā @T3hderk87Ā  dude I recall during the meeting I said ā€œso youā€™re going to let me walk over an extra 10-16 hours a month when I constantly beat expectations? Thatā€™s a very poor managerial decision ā€œ Thatā€™s when the egos got hurt and the meeting was over. It blew me away. In the end it was all about ego
    2
  4666. warranty. Load the cannons!
    2
  4667. šŸ˜‚
    2
  4668. Thats a snap on. I don't think they make them anymore. If you want one check EBay
    2
  4669. It's like a diesel fuel line. They run at high pressure because the engine has direct injection. The connection is "crush to fit" so to speak, to create the seal. If you reuse the line, it can cause a leak. Due to the high pressure, the leak week present itself as I fine mist which is highly combustible.
    2
  4670. Ā @jimmyhorton8297Ā  Thereā€™s no way Iā€™m taking on the zombie hordes with a six shorter. Crossbow for a secondary I think. I choose a 10/22 for zombie land
    2
  4671. This is how zombie movies begin
    2
  4672. šŸ„ŗ
    2
  4673. Many do not
    2
  4674. Just no, this was my limit. IF dude wanted it fixed, heā€™s got to clean it out. And Bug bomb it overnight, then clean it again. And then have a detail company come out.
    2
  4675. We cut it off to fit šŸ¤·ā€ā™‚ļø
    2
  4676. Absolutely! Email me. RainmanRaysRepairs.com schedule appointment via email. Lauren will call you
    2
  4677. Hello! Have good weekend!
    2
  4678. I thought the wire guide tip was energized, I'd hate to touch the work and weld my tip
    2
  4679. Javi-Air is the A/C Van, Jesus works here
    2
  4680. Itā€™s an approximation. G/sec shouldnā€™t ever be below the displacement
    2
  4681. I bet itā€™s the same operating software
    2
  4682. I just looked up the semi official terminology: ā€œMAF's air flow rate at 500 rpm is 1 gram per second per liter of engine displacementā€
    2
  4683. I shot this before the creation of the assault gun
    2
  4684. I shot this before the creation of the assault gun šŸ˜‰
    2
  4685. Noooo I couldnā€™t have! IrRegardless damages me inside. Did I say ā€œErrrrā€¦. Regardlessā€
    2
  4686. Iā€™m going to use that one
    2
  4687. AI changes, the system gets glitchy
    2
  4688. Castor Troy, Nicholas Cages Character from the movie Face Off
    2
  4689. Oil pressure had to build
    2
  4690. Florida
    2
  4691. 20ish I think (then 6-7 to make the videos)
    2
  4692. I used yellow ā€œuniversal formulaā€ and the ford stuff was pink/red. Once they mixed (both are propylene glycol) they ended up red like the remainder of the original coolant
    2
  4693. Noid lights, or injector pulse test light. Mine are made by Pittsburg tools.
    2
  4694. https://youtu.be/dnVqOuhVykE fixed
    2
  4695. No itā€™s just an incandescent
    2
  4696. I break those up and theyā€™re far away , the radio is close and audio is strong. YT gets me every time with car radios
    2
  4697. Ā @ferrumignisĀ  I made s new one ā˜ļø
    2
  4698. Ā @lyntonprescott3412Ā  I made a new one ā˜ļø
    2
  4699. šŸ¤—
    2
  4700. No need to discriminate šŸ˜‰
    2
  4701. Nooooo I donā€™t. They only thing I want the fed doing is maintaining the military and working on foreign policyā€¦ as representatives of the people
    2
  4702. What?
    2
  4703. Im so sorry
    2
  4704. I am as far from both of them as possible šŸ˜‚ Just kidding Ca & NY!
    2
  4705. Good for at lease 1000yds
    2
  4706. Yea thatā€™s what I meant šŸ˜¬
    2
  4707. By weight
    2
  4708. Ā @TXCherokeeĀ  Iā€™ve had it a few times since dec 2019. The kids seem to bring it home from school. šŸ¤·ā€ā™‚ļø
    2
  4709. Sheā€™s pretty busy right now
    2
  4710. Be happy to do it for you!
    2
  4711. Iā€™m not paid by BG nor do they give me free product
    2
  4712. No this is real time
    2
  4713. Usually 1-3 days, this is one took longer
    2
  4714. Negative, it canā€™t run in 4cly mode full time
    2
  4715. I have no idea, I think there is some circuitry in the jump box that prevents the box from charging through the cables and itā€™s just wasting the load from the nator through heat sinks, very strange to me.
    2
  4716. Ohhh noooo. We donā€™t do that. Talking works just fine
    2
  4717. Head cams do t really work for me, I have tried
    2
  4718. I canā€™t find a phone ringer been looking for months
    2
  4719. Itā€™s reusable
    2
  4720. Thatā€™s like asking for a clean construction site. The biggest ripoff shops I have seen have been the super clean ones.
    2
  4721. There are some, very very few dealerships that provide tools to the techs. 99+% of us buy our own stuff
    2
  4722. My bolt now!
    2
  4723. Itā€™s not the best for me either, the files are huge and take forever to process. I think thereā€™s still one other recorded in HDR left to edit
    2
  4724. Not a chance šŸ¤£
    2
  4725. šŸ‘‹
    2
  4726. I know, but it really bothers some people bc of the sudden intensity change. Plus I think itā€™s funny šŸ˜†
    2
  4727. Ur not wrong , that Amsoul is $16/qt for he black 6x bottle and $14 for the grey 4x
    2
  4728. I appreciate that!
    2
  4729. I did! The thing was, I worked almost every Saturday for a couple years, voluntarily. Usually till 12-2. It became a problem when they tried to make it mandatory.
    2
  4730. No the Monte is back for brake lines
    2
  4731. I tried šŸ¤·ā€ā™‚ļø
    2
  4732. It is, but there was a new body style for 07 and mine is just the last run of the build series. Itā€™s confusing to call it an 07 in some circumstances
    2
  4733. Commenters can be very persuasive
    2
  4734. Itā€™s time consuming. Details and patience is required
    2
  4735. Covering the coolant bottle so Iā€™m not advertising for free
    2
  4736. I donā€™t really track it, Iā€™d say 5-10 cans
    2
  4737. We need themā€¦plz send my thanks!!
    2
  4738. Weā€™re ok
    2
  4739. Pretty good for a 2017 I think
    2
  4740. Seriously consider deleting your comment. I wonā€™t because I dont believe in censorship. You are completely out of line bringing politics into this situation. People died in this.
    2
  4741. It was leaking into the lifter valley from the intake manifold gaskets
    2
  4742. Yup I saved it. Iā€™m curious to see whatā€™s inside toā€¦future video
    2
  4743. Easier said than done. And it depends on the vehicles design. Some oil pans can take several hours to revive an oil pan. Some canā€™t be removed without removing the engine. And some are very easy and can be removed in an hour. There are chemical Cleaners that get poured in to break up sludge and done just before an oil change. Ask that being saidā€¦the real question is, will the customer be willing to pay for it all. As you can imagine, costs can be quite high for such a thing. The best thing is to regular oil maintenance and avoid a repair.
    2
  4744. One of my batteries has a bad cell and I let it sit for a couple days.
    2
  4745. šŸ¤£šŸ¤£
    2
  4746. Not going to lie, I didnā€™t look for the specs on those.
    2
  4747. Then Iā€™ll build a six door dually diesel suburban out of the wreckage
    2
  4748. I have a snap on, itā€™s going in itā€™s 5th year
    2
  4749. I know I fixed it later, didnā€™t realize till after I finished video number 3
    2
  4750. It was unlisted and available with a link. I posted it live today. šŸ¤™
    2
  4751. Ooohhh no itā€™s a hit
    2
  4752. Itā€™s now mine! Hahahahah!
    2
  4753. Sure do!
    2
  4754. Itā€™s me, Iā€™m messing with you šŸ˜…
    2
  4755. My morning braid is very powerful
    2
  4756. Nobody is safe from a little trolling around here
    2
  4757. Youā€™ll never.. sinkā€¦ thisā€¦. boat! šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚šŸ–•
    2
  4758. Ā @danejurus69Ā  I will add that order cars with distributor ignition do not like water. These haven't been in production for a couple decades now. But if water gets under the distributor cap it can cause misfires or a no start till the water dries. Use good judgment of making your engine shiney... And don't hose down a hot engine. āœŒļøšŸ˜Ž
    2
  4759. šŸ¤£šŸ¤£ That would actually really annoy me if I got a copywrite strike for music playing in the background
    2
  4760. For the price is say no. My snap on rachets are almost $500 each. Milwaukee costs around half that I think. At home use isn't really their place because they are time savers against a regular rachet or wrenches. They're not for going grunt work like suspension stuff. They're for low to medium torque bolts and for SPEED. (Break loose and let the battery run the bolt out, let the battery run the bolt in, the hand torque.)
    2
  4761. Ā @loubakker5000Ā  lol the interwebs never fail. I found the error, and thank you! I only like looking like an idiot when it's deliberate. Edits have been made.
    2
  4762. Yes. I also wear my sunglasses at night. šŸ˜œšŸ˜Ž
    2
  4763. Did not...
    2
  4764. I donā€™t think Iā€™m funny thoughā€¦stop laughing at me
    2
  4765. My guy, a lot of things just make for a boring and hour long videos. For example, the body shop had this truck before I did. They had things disconnected, causing communication DTCs in nearly every module. My job was to fix the temp gauge reading 160 then overheating on long trips. A/C stops working when overheating. This video was about a thermostat. But you're right, I failed to include these details. You're right, I'm wrong. I won't do that again. Thanks for the feedback.
    2
  4766. You can't x avoid the plastic these days, they all have it everywhere
    2
  4767. According to the little drawing on the box, it says so not pressure wash.
    2
  4768. Operating the engine to its capacity by utilizing wide open throttle? Because thatā€™s how itā€™s done. Ohhh yea, I totally beat the crap out of it while hitting my bowl! I tell you were first in your class too!
    2
  4769. Thanks dirt the sub! Glad you're here.
    2
  4770. I'm naturally an idiot šŸ˜œ. It's a coping mechanism designed to process the horrors of my daily life as a technician.
    2
  4771. Sure did. Due to the faulty thermostat, the ECM recognized that engine coolant temp was out of range. The ECM denied A/C permission.
    2
  4772. I can't tell if your being cool, or trolling. The freedom flags fly high and proud on my land!
    2
  4773. You should know better than to make assumptions. Customers are charged flat rate per job. But by the actual time. If the job takes more time that the labor guide says or less time, the bill is the same.
    2
  4774. Thanks for the sub 150 Man. Glad you're here!
    2
  4775. I am, it takes time -and I gotta keep the bills paid
    2
  4776. Thanks Bill! Love the feedback!
    2
  4777. āœŒļøšŸ˜Ž
    2
  4778. SMH šŸ¤¦
    2
  4779. I like that idea. We have have long term projects! šŸ¤”
    2
  4780. No way must be an illusion
    2
  4781. Itā€™s not my cup to dispose of. I have no right to throw it away
    2
  4782. Not true, I killed two at the end šŸ˜
    2
  4783. Iā€™ll have to outsource the alignments to another shop for the time being šŸ¤·ā€ā™‚ļø
    2
  4784. Hahaha an electrician showed me that one šŸ˜
    2
  4785. ANOTHER!!!!!!
    2
  4786. Huh? Like a fake tire, fake patch, fake video?
    2
  4787. I hate these fancy machines. Iā€™ll take an old 4040 and dial balancer any day
    2
  4788. It was my first day
    2
  4789. It was a joke bro šŸ˜Ž
    2
  4790. Never broke one in my life, they break when they slip, they slip when you donā€™t push them in
    2
  4791. Iā€™ve since acknowledged my naivety
    2
  4792. My freebies only go so far. This was an act of self preservation. Like I said, I suspected he was a predatory customer because he told us a lie from the get go
    2
  4793. Fair point
    2
  4794. It has factory HIDs canā€™t be converted to halogens. I have no more to say
    2
  4795. You and meā€¦we are the same!
    2
  4796. Our audio is very diverse here. It can go from 2 pac to Mariah Carey real quick
    2
  4797. Bet you never had one hang up and tear a chunk of flesh out. Iā€™d rather be smart about things. Itā€™s not my first dayāœŒļø
    2
  4798. Itā€™s a struggle!
    2
  4799. You sure? Prefilling allows the opportunity for contaminates to enter the clean side of the filter, sending them straight to the crankshaft bearings. Itā€™s not critical al all just a DYI myth. Think about it, most cars have inverted or sideways filters that canā€™t be prefilled
    2
  4800. Ā @AlessandroGenTLeĀ  I totally get your point of view! Youā€™re right. Everything I touch is a different and unique case. I tend to treat a car like the owner treats it. (I actually think itā€™s a subconscious thing most of time) I probably shouldnā€™t have put that paper on the guys car. I sure wouldnā€™t have done that on garage kept Mercedes, or even an all original mint condition 92 Ford Probe. I guess Iā€™m trying to say that nothing seemed wrong to me with what I did based on the circumstances.
    2
  4801. Iā€™ll weigh inā€¦we DO NOT prefill oil filters EVER. This is a very bad practice and should not be performed. Filling a filters only serves to allow contaminates to enter the clean side of the filter. Itā€™s not a dry start. Engine friction surfaces already have oil on them, and the fractions of a second after startup is not long enough to displace the oil film and cause metal component contact.
    2
  4802. Ā @kidsytheĀ  I do understand. My industry is very tainted and thereā€™s always a looming shadow over us. Iā€™m working to do my part to reverse the stigma, if thatā€™s possible.
    2
  4803. Spent all the stimulus on beats audio, iPhone and a year of Netflix
    2
  4804. Never been call a pine cone beforeā€¦Respect!
    2
  4805. Runs the risk of introducing contaminates into the clean side of the filter. And what about filters that are mounted sideways, or spinny side down? Not noobā€¦technician
    2
  4806. lol there's no ac in ohio
    2
  4807. Looked purple in the direct sunlight, itā€™s actually a very rich deep blue
    2
  4808. šŸ‘‹
    2
  4809. You missed it, I sure did!
    2
  4810. Nice haul
    2
  4811. Thereā€™s a hole in the block šŸ˜³
    2
  4812. Absolutely, It was on sunday, Dave was off work
    2
  4813. Dont be hard on urself
    2
  4814. Sirup
    2
  4815. 39 years undiagnosed!
    2
  4816. Drivers cause accidents
    2
  4817. Itā€™s fine šŸ˜‰
    2
  4818. Itā€™s the same vehicle
    2
  4819. Itā€™s both,
    2
  4820. Noooooo!
    2
  4821. I disconnect dash cams too
    2
  4822. Ā @bluecollarbiker8005Ā  Itā€™s all good my man!
    2
  4823. It works
    2
  4824. BC its my wifes van and i can do these things :)
    2
  4825. no it was from 1800 radiator. The van burns oil, that half qt will be gone in no time. Plus its the wifes van, so i can do these things
    2
  4826. We still do, but non mechanics donā€™t know the term.
    2
  4827. Glad you're here!
    2
  4828. No snakes were harmed in the making of the induction cleaner.
    2
  4829. sea foam is good too!
    2
  4830. I have a box of the Engine dynamic flush. It's a 3 gallon kit used for deep cleaning a sludged up engine. I'm saving it for a really nasty one!
    2
  4831. No thatā€™s some kind of a myth
    2
  4832. Ā @williamlanphar630Ā  hereā€™s pt 2 https://youtu.be/8aRYwNqiJOk In the video description there will be a link to the next video enjoy šŸ˜‰
    2
  4833. Ā @williamlanphar630Ā  I did everything except an oil system cleaning that included removing the pan. Itā€™s been a few months and we havenā€™t seen the car since the Intake job. Did you find the links to part 2&3? (Just checking)
    2
  4834. Ā @anonymousinc6330Ā  oh yea that stuff is good. Project Farm tested it in a video and it performed very well.
    2
  4835. I heart Mobil 1
    2
  4836. Hey it was a better pic than the McDonaldā€™s drive thru
    2
  4837. Love bug season, no point right now
    2
  4838. Ā @timschultes6467Ā  The manufacturer extended warranties are great, but the 3rd party policies arenā€™t as solid as people believe
    2
  4839. Looks like Iā€™ll make another video! About how to choose the correct warranty
    2
  4840. Ā @dans_Learning_CurveĀ  Yea thatā€™s exactly why Iā€™m here. The place I worked at screwed over an old lady and thatā€™s the hill I chose to die on
    2
  4841. Iā€™m spreading things out so we can take some time off
    2
  4842. I bill one hour labor for a full visual, this includes operating every system, button, and feature to make sure it all works. I also perform a full system code scan.
    2
  4843. Let someone else take the depreciation
    2
  4844. Get a Foxbody 5.0
    2
  4845. Itā€™s only a lawsuit if you donā€™t put it back
    2
  4846. Thatā€™s why Iā€™m getting a 3rd lift
    2
  4847. Iā€™m going to check that out later.
    2
  4848. If it can stick open, it can stick closed
    2
  4849. Iā€™ve seen it, itā€™s ugly!
    2
  4850. šŸ’Ŗ
    2
  4851. Nooo that doesnā€™t count šŸ˜
    2
  4852. Itā€™ll be back
    2
  4853. Ā @brucebaxter6923Ā  no it was just a case of parts availability, Iā€™ll happen. We didnā€™t expect to find control arm damage. That way I see it, itā€™s better than it was
    2
  4854. We know
    2
  4855. Ok Boomer
    2
  4856. Ā @GodmanchesterGoblinĀ  I just looked. And WOW, it really does look cracked.ā€¦fortunately I have an updateā€¦. https://youtu.be/oCr20C8i6Z8.
    2
  4857. Casting seam
    2
  4858. Itā€™s not cracked, just a casting mark
    2
  4859. It canā€™t come out even if the welds break
    2
  4860. Thatā€™s fine, Iā€™m booked 3 weeks out anyway
    2
  4861. Itā€™s Pittsburg from harbor freight, thatā€™s why Iā€™m afraid of it šŸ¤£
    2
  4862. Oh yea I violate daily
    2
  4863. Ā @romanflores5505Ā  Oh I did. for that exact reason!
    2
  4864. Ā @freestyleskylineĀ  Furthermore, to reinforce my intentions, I shot this video because I declined to service this vehicle. I felt it would be good to have should the non paying non customer complain that I wouldn't work on it. Thanks for your input, and thanks for watching.
    2
  4865. Ā @freestyleskylineĀ  I didn't say a single word about the customer. Watch again.
    2
  4866. Ā Craig BauerĀ  Yea the store manager drove it into my stall. Said he's got a walk in clutch job for me... I took one look, shot the video so I had evidence to argue my point, and promptly refused to touch it. There was no way I was going to subject myself to the horrors of trying to repair this rolling junk yard.
    2
  4867. Bet on it. The man wore a ten gallon hat and owned a beef ranch.
    2
  4868. Ā @austinmason5452Ā  It really was a death trap. Particularly in the event of an accident. The occupants could be impaled by a number of objects in the cabin.The fuel tank could fall off and cause a fire. The bed could break free from its ratchet straps and crush the cab. Not to mention I didn't have any confidence that wheels or suspension parts could fall off while driving. I mean other than that I guess it could be ok-ish
    2
  4869. Nope. Built like a rock.
    2
  4870. Yea the radiator cap was still good
    2
  4871. I've seen some shyt in my day. Had a Buick once that the guy used the passenger floor as a spittoon for chewing tobacco. It was an inch thick at least. There was a Ford Expedition once that smelled so bad, that I was gagging on my way to it from there parking lot. It's windows were still up. I didn't touch either one of them. And I didn't touch that rolling junkyard in the video either.
    2
  4872. Not this time. That thing was a rolling liability. I had to refuse service on that particular vehicle.
    2
  4873. Liability liability liability
    2
  4874. šŸ¤£šŸ¤£šŸ¤£šŸ˜‚šŸ¤£šŸ˜†Now THAT would be the icing on the cake.
    2
  4875. No permission needed to film in public. No shaming took place either. If you consider objects that can impale you and fuel tanks being secured with Wal Mart rachet straps safe.... Who am I to argue. You know what they say about opinions.
    2
  4876. Yea but I didnā€™t need them šŸ˜œ
    2
  4877. Bioengineered food products šŸ„¶
    2
  4878. šŸ‘‹
    2
  4879. Not a sponsor
    2
  4880. Change is the only thing that remains constant
    2
  4881. Agreed. On the bright side, this customer got this car for next to nothing. Iā€™m just trying to save its life.
    2
  4882. https://youtu.be/SJTypgTBBEw
    2
  4883. Yea but this cord is being subjected to 4psi maybe, itā€™s not sealed on other end
    2
  4884. You too! šŸ¤™
    2
  4885. Ā @rrich8371Ā  oooh dont get me started on debt and spending etc šŸ˜”
    2
  4886. Donā€™t act like youā€™re not impressed!
    2
  4887. Got your moneyā€™s worth!
    2
  4888. I didnā€™t have much for a good thumbnail so I made one with stock photos šŸ¤·ā€ā™‚ļø
    2
  4889. Bingo!
    2
  4890. The alternative is bad, very bad. See, there once was another Ray, and evil Ray. And I killed him. (Name that modified movie quote from the early 90s)
    2
  4891. I usually donā€™t, this one was a little excessive and I just couldnā€™t charge full timeā€¦and the insurance company paid the bill. The thing is, in car land, things AWAYS come back to bite. ā€œCARmaā€
    2
  4892. Nope, itā€™s totally ok
    2
  4893. At my digression šŸ˜
    2
  4894. I accept this
    2
  4895. We all have an inner child šŸ˜‹
    2
  4896. Iā€™m getting all of them
    2
  4897. Check out the website. Jm3OilFilterWrench there is a locking version with a self adjusting jaw set that locks in
    2
  4898. Soon
    2
  4899. I had some design input for the next version šŸ˜
    2
  4900. Theyā€™re cheap now, the labor to cut them is close to the cost of new ones. Iā€™ve got a good lathe Iā€™ll make a rotor cutting vid laterā€¦itā€™s on my to do list
    2
  4901. The labor to remove and machine rotors often exceeds the cost of a new one. Itā€™s rare that people machine then these days. Furthermore, many shops donā€™t invest in new lathes to replace the worn out old ones, therefore the quality of the cut is low and then the shop has to but rotors anyway after failed attempts to recondition. Plus, lots of guys these farts donā€™t know how to operate a lathe. Machining rotors is becoming a lost art, like tuning a carburetor.
    2
  4902. You can anyways go with the black anodized spline drive type. The Nuts I installed on this Durango were dorman parts and I donā€™t think they were fortune either
    2
  4903. I second trust one. Trouble is EVERYTHING is Chinese now. When u can I always buy domestic made products, even if it costs more šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    2
  4904. I literally said that Iā€™m tightening them in a raised position to account for the normal ride height
    2
  4905. šŸ˜³
    2
  4906. Ā @realcygnusĀ  I try to read them all! It takes some time and Iā€™ve had to learn to speed read
    2
  4907. Some states make us have inspections and some do not. As for the mileage / Km-age think if it like this. A two hour commute for you across the pond is quite far, however due to the vastness of the US, driving an hour or two is common. We have a lot of land between cities
    2
  4908. The lottery is voluntary taxā€¦we pay enough taxes
    2
  4909. It was scheduled to release this morning. Good to go now
    2
  4910. Perfectly described torque action for all precision parts šŸ¤£
    2
  4911. I will not comply
    2
  4912. Thatā€™s was the housing seal not the inner seal around the plate
    2
  4913. Door actuator is stuck, it the door is broken in the dash and canā€™t open
    2
  4914. Yeaā€¦typo
    2
  4915. Somedayā€¦. šŸ„¹
    2
  4916. Fixed earlier šŸ¤£šŸ¤£šŸ¤£
    2
  4917. Blow air into the hole and the little pieces will fly out. Do NOT let them fall into the chamber, the porcelain can imbed itself into a valve seat and wreck the head. Had it happen to me on a 3.6 Cadillac engine once. The plug broke and I didnā€™t notice the missing chip. That was a hard day
    2
  4918. Black magic
    2
  4919. They were $28 each from MB. With that kind of fouling I wouldnā€™t attempt cleaning. One would have to scrape the carbon off and probably damage the plug without knowing
    2
  4920. I think missed it Iā€™ll go back a look! Thx
    2
  4921. I knew it was over, but I was having fun šŸ™ƒ
    2
  4922. Itā€™s so much the fob itā€™s that the module needed to be programmed
    2
  4923. No snakes were harmed in the making of this video
    2
  4924. Probably
    2
  4925. Comment generator šŸ˜šŸ˜
    2
  4926. Ā @JackHudlerĀ  ouch. That one was brutal
    2
  4927. I made a spelling error in the videoā€¦ please free to publicly shame me for my oversight
    2
  4928. You did it wrong
    2
  4929. So it looked nice. And to remove the old spray to make room for new spray
    2
  4930. Mark you were closeā€¦.so close
    2
  4931. Ooooohhh nooo donā€™t do it guys, Iā€™ve already replaced everything
    2
  4932. Bro you got me! I was in my truck parked in front a Culverā€™s eating curds and a double.
    2
  4933. Iā€™m here to keep myself sane šŸ˜‚
    2
  4934. Itā€™s now in the trash
    2
  4935. šŸ˜³šŸ˜³šŸ˜³ Thanks to YOU!!! ā¤ļøā¤ļø
    2
  4936. I get that often
    2
  4937. Itā€™s not like I ordered it from the factory šŸ¤·ā€ā™‚ļø
    2
  4938. I knew someone would recognize it!!!
    2
  4939. Wife Unit
    2
  4940. Lauren will make it for her Wife Unit Channel
    2
  4941. Why would I hit it with a tow truck?
    2
  4942. I mean you have to see the bigger picture, I'll have a 3rd lift soon
    2
  4943. I don't even know, but it has about 5000 hours on it
    2
  4944. Ā @GhausterĀ  this is getting out of controlā€¦I quit
    2
  4945. Got one out on time YAY!
    2
  4946. The neighbor painted it, not much to make a video on. I'll talk about it later. Thinking of a livestream later this week.
    2
  4947. It was out of the line of fire
    2
  4948. Putting up another door and installing a 3rd lift
    2
  4949. He did
    2
  4950. We will find out next time thereā€™s some wind
    2
  4951. Just can't beat them!
    2
  4952. The owner had the trans done a few thousand miles agoā€¦with Amsoil ATF šŸ˜œ
    2
  4953. There are internal baffles and cambers on this one that I couldn't fit my hose into
    2
  4954. Iā€™m the only one who didnā€™t see it šŸ˜‚
    2
  4955. Iā€™ll put a rubber flap on it šŸ˜‰
    2
  4956. Why not?
    2
  4957. Around 4.50/gal
    2
  4958. Negative. But I have a giant CAT oil filter on it
    2
  4959. What I say??
    2
  4960. Maybe if i plow through 3ā€™ off water at speed!! šŸ˜ And I probably will
    2
  4961. šŸ‘‹
    2
  4962. I think Iā€™ll change them out with plastic push-in clips
    2
  4963. Itā€™s time for 6 šŸ„ŗ
    2
  4964. I see what you did there šŸ˜
    2
  4965. When itā€™s up front, then itā€™s a frunk
    2
  4966. Not exactly, the little grommet was worn. If you try to clip it back on, it comes just comes off again
    2
  4967. Physics my friend! The gun is outputting mechanical energy, in this case it has nowhere to go bc the stud didnā€™t turn, so the mechanical/kinetic energy is converted into heat. Plus there is some friction as the socket hits the stud.
    2
  4968. Long block is $3800 + shipping. But it still costs a couple tho more to install it
    2
  4969. Thatā€™s ford spec not the Cloyes spec. Since the bolt is a Cloyes bolt, Iā€™ll do it their way
    2
  4970. Iā€™m a cultured American, I know old English as it helps to better understand American English. I find root words or the origin of phrases fascinating. I wish they taught Latin when I was in school
    2
  4971. Haha Iā€™m going to use that + -
    2
  4972. Youā€™re not wrong šŸ˜‚
    2
  4973. Yay!!!! 1m šŸš€šŸŒ–
    2
  4974. I like road less traveled
    2
  4975. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ„¹
    2
  4976. It was
    2
  4977. I know šŸ˜ž
    2
  4978. The customer was the rush. šŸ¤·ā€ā™‚ļø Normally Incomplete my inspection during the draining thus using time efficiently. No as soon as the oil bottles were opened the customer was ready to leave and they were pressing for time. And unhappy about the additive situation.
    2
  4979. I get that, but it wasnā€™t realistic to let it drain for 15-20 minutes.
    2
  4980. Dangā€¦I thought I had a live one to pin in the comments šŸ¤£
    2
  4981. I fell asleep early before finishing šŸ˜‰
    2
  4982. It took forever to make thatā€¦it was worth it šŸ˜Ž
    2
  4983. šŸ¤£
    2
  4984. Itā€™s an 80% blow gun, they donā€™t know I have it šŸ¤£
    2
  4985. I donā€™t know yet. I collect mail on Friday, but took today off, so Iā€™ll have to wait till Monday
    2
  4986. It needed the little valve located on the vapor canister that is located behind the RR fender liner next to the fuel filler neck
    2
  4987. @ šŸ˜‰ the fire and fury of the comments
    2
  4988. Ā @GizmettiĀ  šŸ¤£šŸ«”
    2
  4989. Itā€™s there by the battery šŸ‘
    2
  4990. Iā€™ve never had one of these Chevys treat me like this šŸ˜¬ hardest one ever
    2
  4991. It can still draw in air from the fender behind the headlight. So even if itā€™s submerged, the engine isnā€™t likely to suck up water, unless itā€™s forced in and up at speed. Plowing into this would have sucked up some water.
    2
  4992. It felt like a 2 last night. We had 5 tornados on the ground. Theres cars under water in Sarasota
    2
  4993. Sooooo many!
    2
  4994. Ā @ianriggsĀ  The shop was pretty dry except for a couple roof leaks
    2
  4995. Not true, plowing through water will destroy an engine
    2
  4996. Mehhh
    2
  4997. Could have been worse šŸ¤·ā€ā™‚ļø
    2
  4998. PTU - power transfer unit
    2
  4999. Yes it came from the pacific, itā€™s super angry
    2
  5000. We have one, itā€™s brand new and doesnā€™t work šŸ¤¦ā€ā™‚ļø
    2
  5001. B4 šŸ¤£
    2
  5002. The yellow dyed coolant is advertised as universal and can be mixed. Youā€™re right about mixing and turning to gel, If you mix propylene glycol and Etheline glycol which is traditionally the red/orange and green
    2
  5003. Our machine is supposed to vac n fill but the Venturi is super weak
    2
  5004. This isnā€™t a redo šŸ¤·ā€ā™‚ļø
    2
  5005. Email me Iā€™m send you one, RainmanAppointments@gmail
    2
  5006. P/N 315 on box is LV ā€¦ 312 is regular
    2
  5007. šŸ‘‹
    2
  5008. Accurate!!!
    2
  5009. Itā€™s my fault, crappy edit. I shall not disappoint again
    2
  5010. I canā€™t read šŸ¤£šŸ¤£šŸ¤£
    2
  5011. šŸ¤£šŸ¤£šŸ¤£šŸ‘
    2
  5012. Itā€™s working at itā€™s not a problem šŸ¤·ā€ā™‚ļø That 4th hanger wonā€™t matter bc the pipes canā€™t go anywhere and the driver side hangars are taking all the weight off
    2
  5013. It burns the rubber parts in the expanders
    2
  5014. I got it later
    2
  5015. Sure did!!
    2
  5016. Thatā€™s not official policy. We take firearms and firearms safety very seriously. The blowngun is one thing, real rifles are another
    2
  5017. I know things
    2
  5018. I can close it when I want it stays shut
    2
  5019. šŸ¤¦ā€ā™‚ļø
    2
  5020. We have a tight schedule but we make it all work.
    2
  5021. Heā€™s all healed up and back to normal!
    2
  5022. šŸ‘€
    2
  5023. So true. Remember the subaru subframe?
    2
  5024. Pulled it with my truck
    2
  5025. Negative, the rubber that I pulled back is a dust seal, the brake fluid seal is on the pistons inside of the cylinder. Good question!
    2
  5026. The wings donā€™t have bones is what I was trying to say šŸ¤­
    2
  5027. Negative the lid was flipped back over on the crate
    2
  5028. Ā @mordaccadrom250Ā  Hang on Iā€™ll try to fix it for you
    2
  5029. Ā @mordaccadrom250Ā  It posts at 6am (5hrs from now) I thought the link would work also, I guess it wonā€™t let you in. Sry my guy! I do list video for early release for the channel members tho
    2
  5030. So are the new Buicks
    2
  5031. QuƩ?
    2
  5032. Lol thatā€™s how you know a video,is doing well, new trolls show up and theyā€™re so angry
    2
  5033. I get to make jokes on occasion. šŸ’Æ % not real
    2
  5034. Totally worth it!
    2
  5035. Remember the people that were putting their iPhones in the microwave bc videos said it would charge instantly?
    2
  5036. Truth is I ran out of blue silicone
    2
  5037. Ok
    2
  5038. Ā @garthjunor3027Ā  It can easily happen. Does the delivery truck have dirt in their tank, did anything fall into the shop tank during oil transfer, is there anything on the tip of the oil gun, if it was wiped with a towel, did fibers from the towel get deposited onto the gun, or funnel etc. there are loads of ways for contamination to enter oil and when dealing white particles on the micron level anything can escape detection.
    2
  5039. Introducing contaminates into the clean side of the filter
    2
  5040. Whuuuaat? I stand corrected
    2
  5041. šŸ‘
    2
  5042. Oooohhhh! Awesome, Iā€™ll make sure to collect the mail tonight! Thank you!
    2
  5043. lol other places in Floridaā€¦like Key West
    2
  5044. Itā€™s hard to plant a flag on internet, we must speak in code now
    2
  5045. Ā @craigquannĀ  supercharged 3.8 šŸ˜
    2
  5046. I would also go for a GMC Typhoon. Remember the 2dr box S10 blazers of the late 80s? The typhoon was an AWD version with a turbo. Theyā€™re super rare and expensive now
    2
  5047. I love the V
    2
  5048. Whatever dude! āœŒļø Youā€™re not even in the right video
    2
  5049. Alldata
    2
  5050. Not sure didnā€™t
    2
  5051. They have their pros and cons.
    2
  5052. Donā€™t tell everyone, but Iā€™m considering a restriction restoration job. I think all of the bugs are now dead and it could be safe to enter
    2
  5053. It has a case
    2
  5054. I got this one for angles too. I I like my clicks
    2
  5055. Realistically I couldnā€™t hear anything over the belt drive noises tho. Need to fix that first and drive it.
    2
  5056. You devil you! Making me confused šŸ¤£šŸ¤£šŸ¤£
    2
  5057. I didnā€™t film that part. Used some engine degreaser and brake kleen
    2
  5058. Iā€™m capable of the R rated version toošŸ¤£
    2
  5059. Weā€™re going to change that I think. Someone needs to be coached over this. The problem is at the hub and itā€™s a corporate problem. Feel free to share this video with your managers. Iā€™ll tell em how to fix the whole problem. āœŒļø
    2
  5060. Yea but Iā€™m trying not to bash a major corporation in public. Itā€™s the classy way to deliver the message without putting someone on blast. (IMO)
    2
  5061. Ā @skutahuniai4830Ā  no seriously, when they tell me parts will be here in the morning, I pull it apart. If parts donā€™t show up, 1 we have a vendor problem or 2 someone lied to me. Either option isnt my problem and I donā€™t wait around to make sure everyone else does their job before I start to do mine. I push accountability pretty hard. And yes I always have a car down, sometimes for days on end, thatā€™s why I work three stalls. But to say that I make it all up is just inaccurate at best
    2
  5062. Negative. I only managed to damage them by getting oils on the rubber and they also break because of heat sometimes
    2
  5063. You miss nothing
    2
  5064. The leak was no more after I replaced the filter cartridge
    2
  5065. Missing, and I missed it. Next time
    2
  5066. I actually didnā€™t pick up on it. I did notice when I watched the video.šŸ˜¬ Iā€™ll save that one for next time.
    2
  5067. Yea I do that word thing incorrectly sometimes šŸ¤£šŸ¤£šŸ˜†
    2
  5068. Missing. I actually missed it. Didnā€™t catch it till I was done and watching the forage. Iā€™ll save that one for later
    2
  5069. I did an lq9 6.0 from an 04 Escalade. (Makes more power) I reused the original intake manifold and injectors. If you change engine type, gotta get a tune done
    2
  5070. There was really no need to swap it back to the the #3 position. Swapping it around was just a troubleshooting method to identify and confirm the faulty coil. Once confirmed I replaced it with a new one problem solved
    2
  5071. Ā @steliocontos82Ā  It happens šŸ˜ BTW a worn spark plug can cause coils to fail. Normally I wouldā€™ve addressed spark plugs as well but given the circumstances of this particular situation the goal was to make it right regarding immediate failure rather than try to sell more work. The customer was already skeptical of the situation as it was and we just wanted to make it right as quickly as possible.
    2
  5072. In that scenario, there would be fresh fingerprints and marks on the bolts. weā€™d realize the scam not take the bait. ā€œIt was fine with it came in, it was fine when it went out, and this coil was recently replaced by someoneā€ But in an odd coincidence situation, itā€™s best to take care of the situation to save face (even if itā€™s not your fault) Like being married
    2
  5073. But the coil is what failed
    2
  5074. Yes it is. We also have adblue here too
    2
  5075. The old green coolant is Etheline glycol almost everything else is propylene glycol. Fun fact propylene glycol is also used as an artificial sweetener to substitute for sugar. I find that suspicious
    2
  5076. $$$$
    2
  5077. $$$$
    2
  5078. Not looking good. The owner doesnā€™t want to let it go
    2
  5079. It Supplies oil filter to that big fancy looking timing gear that you saw under the cover. That timing gear will rotate within itself and change valve timing. That cylindrical still annoyed that I was cleaning is what supplies and takes away oil flow to that time in gear and that is how variable valve timing is actuated. Pretty fancy huh
    2
  5080. Yes I it does! Replace those VVT solenoids. One of for the intake cam, the other is for the exhaust cam. Theyā€™re located in the top of the engine, below the plastic cover. Easy DIY
    2
  5081. šŸ¤£šŸ¤£šŸ¤£šŸ˜‚
    2
  5082. Help me out with a share or FB post, weā€™re will get there together
    2
  5083. Report to YT.
    2
  5084. Itā€™s the background music. I have two or three ways around it. One I can change the speed the video I can mute the sound I can cut the scene out completely or I can sing along those of the only ways to avoid copyright claim
    2
  5085. Are you a bot?
    2
  5086. They are very good they usually end up over torquing by 10% on a strong impact, compared to what they are rated for. For example if the lug nut requires 100 pounds of torque i use an 80 pound stick and then finish it off with the torque wrench
    2
  5087. Hillary for Prison... down with the traitor!
    2
  5088. That's because they're stumbling over each other on a nightly basis to block traffic and loot the nearest Macy's, in an orgy of uncontrolled mass hysteria in a made up battle for equal rights and freedoms that they already have.
    2
  5089. pointmanzero You are an idiot. Politics made the train crash?? Really?? That's your logic?
    2
  5090. Fuck You CNN!
    2
  5091. beginning slow clap now
    2
  5092. I don't want to be an alarmist, but it's time to recognize that is moment in history, is the exact reason that Americans own 300 million firearms.
    2
  5093. Ā ISIS MemberĀ  You're existence is wrong and ISIS should die in a fire.
    2
  5094. Down with Hillary! Justice must be served. Thus corruption must end.
    2
  5095. They have stolen our election, and cheated our nation. They demonize, hate and vilify us, they hate our country and our way of life. The new conservative movement is, 80,000,000 Patriots strong and growing. Our movement is bigger than any one man, including Donald Trump. AND they are now forcing us to fight for our most basic of liberties. We will educate them on the true meaning of "not my president" and "RESIST". This is only the beginning.
    2
  5096. Down with China
    2
  5097. Treat rocks like rifles and finish the wall Mr. President! Hold the line!!
    2
  5098. Jail the traitors!
    2
  5099. Ooohh we are in deep deep shyt. Someone please call Trump to fix this mess. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øTRUMP 2021šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²
    2
  5100. I do several other things off camera in most vids. The rad didnā€™t have a drain valve, this is common.
    2
  5101. Ya got me!
    2
  5102. I'm actually under water when I narrate
    2
  5103. It's skynet
    2
  5104. I wish, but some days just don't offer a home run for content. I play with toys that I'm given.
    2
  5105. I spent some time in KCMO. And thanks for the compliment.
    2
  5106. Ā @BryanTorokĀ  Remove and replace the assembly calls for 1.6hr @$95/hr I don't know the price of the converter assembly, I think it's around $1600 from GM(our service advisors handle that part) I quoted 2.4 hours to remove, weld and reinstall. I won't try it on the car because of the location of the crack. Yes I'm slightly concerned about damaging the core. However, if I make a series of small beads and let it cool in between, I think I can pull it off without damage. Good question. Thanks. I still haven't made a repair yet, going on the days I think. The owner hasn't made a decision.
    2
  5107. It's part of a fleet. It drives all day every day
    2
  5108. Yea i know, I think I'm going to end up welding this crack back together. $2000ish dollars for a cracked converter (because it's a whole y pipe assembly) is just not fair.
    2
  5109. Customer service is the name of the game
    2
  5110. šŸ˜‰ semantics
    2
  5111. I know, what are the odds?
    2
  5112. Yea you got me. I realized my hypocrisy when the lift lock comments started. I've started using my locks again.
    2
  5113. šŸ¤£šŸ¤£šŸ¤£šŸ¤£āœŒļø
    2
  5114. Theyā€™re amazing! You have to use a heat gun on them, no lighters. But they make a very strong connection
    2
  5115. He quit last week
    2
  5116. Honda VTX1300
    2
  5117. Thatā€™s the thing about ridersā€¦. Most of canā€™t be convinced. We know we flirt with death every tube the kickstand goes up. Iā€™ll get back on a bike again no doubt. Now just isnā€™t the time. Best think you can do is just stash your mind and offer your concern and opinion. That way no matter what, if the worst ever happens, you have done your part.
    2
  5118. Wait till I tell em that weā€™re raising the piston rings šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ˜ˆ
    2
  5119. Nooooooo!!
    2
  5120. šŸ¤£šŸ¤£šŸ¤£
    2
  5121. It was doing it with the full battery too, the solenoid ws definitely sticking closed
    2
  5122. Howdy šŸ‘‹
    2
  5123. Yea itā€™s ok. It was moved
    2
  5124. ā€˜Twas spotless inside
    2
  5125. šŸ¤™šŸ˜ŽāœŒļø
    2
  5126. You are
    2
  5127. Ohhh I saw that valve cover
    2
  5128. No easy task my friend šŸ˜‰
    2
  5129. I said we like it, I didn't say we had much of a choice. One of the big moves about NAFTA in the 90's was that we shipped a huge majority of our manufacturing equipment out of the country. No more machines, no more production. 30 yrs later and here we are realizing that domestically produced products are rare.
    2
  5130. https://www.chicagotribune.com/news/ct-xpm-1999-11-11-9911120019-story.html
    2
  5131. I realize it was something different. I donā€™t deviate from the program often
    2
  5132. I can whip up a few things, but I donā€™t have much talent in the culinary arts
    2
  5133. Didnā€™t know Scotty was live šŸ¤·ā€ā™‚ļø
    2
  5134. Ā @alexgallacher5720Ā  love it!
    2
  5135. Needle scaler
    2
  5136. Sure do. Thereā€™s always exceptions. For example if parts are removed to diagnose, then a part is replaced. Overlap is accounted for
    2
  5137. šŸ¤£
    2
  5138. I think it was from a regular viewer whoā€™s been here for a whilešŸ˜
    2
  5139. I happen to have an enclosed cargo trailer. But most folks use a flatbed tow truck
    2
  5140. But the nice ones always get a ā¤ļø. Iā€™m not even sure this was a mean commenterā€¦It did come across like that tho and I was šŸ¤”. I figured theyā€™re new here
    2
  5141. Yes! In a round about way. I can get things done much more efficiently! In some situations having a high end tool is what makes a job possible
    2
  5142. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  5143. Itā€™s hard to say. This is a 20yr collection. Itā€™s a lot
    2
  5144. I do have socks šŸ¤£
    2
  5145. I have a troll that I know IRL. He does that every video
    2
  5146. ok
    2
  5147. Vote for me! šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸšØšŸ˜Ž
    2
  5148. naawww IDK .
    2
  5149. I was actually sent back in time to destroy SKYNET before it launches its missiles against the targets in Russia.
    2
  5150. Doo dee doooo!!!!
    2
  5151. I am a robot
    2
  5152. šŸ˜‚šŸ˜‚šŸ¤£
    2
  5153. Itā€™s all rain here, nowhere to drain to
    2
  5154. Twoā€¦ I have people from the coast here
    2
  5155. I'm getting HAMMERED right now dude
    2
  5156. Itā€™s 10
    2
  5157. No I have guests for the storm
    2
  5158. Probably šŸ¤£
    2
  5159. No itā€™s 10
    2
  5160. A LOT
    2
  5161. LOL not THAT flexible. I tried
    2
  5162. i didnt decorate
    2
  5163. šŸ¤£šŸ¤£
    2
  5164. Ahhh not rear, itā€™s a proprietary blade
    2
  5165. Iā€™ll do interior later, headliner carpet and reupholster the seats
    2
  5166. That foam piece is supposed to seal it off
    2
  5167. My truck makes me money and mechanically itā€™s mint. The worse part is the interior. Beats spending 100k on a new one
    2
  5168. Yes on the wheels. Maybe after I use up my current set of tires
    2
  5169. Ā @PapasHobbyGarageĀ  defiantly get a tripod or flex mount! I usually hang a GoPro from a light bar on the hood or radiator support
    2
  5170. Ā @PapasHobbyGarageĀ  Hahaha so true
    2
  5171. Same width as my rear tires šŸ¤·ā€ā™‚ļø
    2
  5172. No itā€™s still there, my had the building was actually two separate areas, I moved into the second area
    2
  5173. I donā€™t delete comments
    2
  5174. Found em on eBay
    2
  5175. Thereā€™s a lot of folks who think that. Perhaps there were some examples of this system that used that logic. Iā€™ve never encountered that before but totally possible, Iā€™ll look deeper into it.
    2
  5176. šŸ¤£šŸ¤£šŸ¤£
    2
  5177. Out of everyone here, youā€™re the only one sitting the smell of their own fart.
    2
  5178. Yea it kinda does šŸ¤£
    2
  5179. Sounds solid to me. No ground at the PMC connector when commanded on and a good circuit is plenty of evidence combined with memory error DTCs.
    2
  5180. Donā€™t slack on your PT!
    2
  5181. I get it. These are still ok and has been changed within the year. The guy was already strapped for cash, didnā€™t need to replace those IMO. Customer agreed.
    2
  5182. DIY sure because if it fails or doesnā€™t work then youā€™re not into it for a bunch of labor. I wouldnā€™t advocate doing it that way in a professional atmosphere because youā€™re charging a bunch of labor to replace some very cheap parts.
    2
  5183. Sure am, Iā€™m investing in myself these days
    2
  5184. Canā€™t afford it
    2
  5185. It's been drilled out a couple of times resulting in broken off extractors
    2
  5186. I already broke off an extractor in the bolt. Drilling more was just chewing up bits
    2
  5187. šŸ˜‚šŸ˜‚šŸ˜‚ gotcha
    2
  5188. Canā€™t do it every time, hold your horses J šŸ¤£
    2
  5189. Itā€™s different now, I canā€™t really describe it yet. But everything has changed in some way. Edit: people included
    2
  5190. Canā€™t hide foreveršŸ¤£ You guys are wayyy smarter, 100% agreed! (In some ways) šŸ˜
    2
  5191. But we are banning them left and right
    2
  5192. Thereā€™s a better way to explain the discrepancy šŸ«”šŸ¤£
    2
  5193. Or I made a settings error and itā€™s fixed now šŸ˜‰
    2
  5194. Yea I fixed thatā€¦..
    2
  5195. Error error! I fixed it
    2
  5196. Theyā€™re LED they just do t look like it
    2
  5197. One or twice šŸ¤£
    2
  5198. A slip up with a chisel or drill bit would blow right through some tape.
    2
  5199. I actually forgot to do that. Thank you for reminding me! Itā€™s done
    2
  5200. Itā€™s not posted yet, I left Easter egg links to it for for now
    2
  5201. šŸ¤£šŸ¤£ Love it!
    2
  5202. Ty!
    2
  5203. šŸ˜³šŸ˜³ Really?? Thanks. Face slap
    2
  5204. Itā€™s April fools day
    2
  5205. Folks like to hate on those that tell ā€˜em what they really think
    2
  5206. I can tell you donā€™t have any fun
    2
  5207. Ā @ianriggsĀ  Hey I didnā€™t catch you yesterday to say goodbye! Your car is freakin sweet. Does it feel better? Those old rotors were junk
    2
  5208. ATL! I went to high school In Fayetteville
    2
  5209. Yes it part of the condenser
    2
  5210. He wanted one! šŸ¤·ā€ā™‚ļø
    2
  5211. Inflation
    2
  5212. Did you even watch the video?
    2
  5213. I cannot comment publicly if adds have to be watched for 30 seconds or not to qualify as a paid interaction
    2
  5214. It fooled me tooā€¦ no bolt goes there
    2
  5215. Itā€™s an acquired skill
    2
  5216. Paid $3k for the Hat, scanner was free
    2
  5217. You found it through the link yesterday, it was unlisted. I do that on multiple part projects
    2
  5218. Yea I got another GoPro9, this one doesnā€™t freeze up like my last 9 did. (Been using a GoPro 8) How is the quality?
    2
  5219. If Eric sees this then Iā€™m sure heā€™ll weigh in. Iā€™m not going to pester him as if we need a mediator.
    2
  5220. Seriously? Go watch the video again
    2
  5221. It can be done from a laptop but one would need access to GMs system. They make you pay a premium for programming access. Sine weā€™re are retail shop and deal with several manufacturers, we outsource the programming to the company BC that already purchased access to the mfrs systems. They do the programming remotely and we pay the. A usage fee. That way the shop doesnā€™t have to buy subscriptions to multiple manufactures
    2
  5222. Toxic trait šŸ¤£
    2
  5223. Welcome to the party
    2
  5224. Itā€™s gone šŸ˜”
    2
  5225. was totally waiting for this comment :)
    2
  5226. Ā @tattoojayjayĀ  itā€™s the same here. The big companies have a monopoly on services and we do have a choice bc they have already killed the competition. Itā€™s twice the cost and half the value
    2
  5227. Slip of the tongueā€¦.words
    2
  5228. Itā€™s not too happy either, at 1/3 million miles in surprised itā€™s still going
    2
  5229. Itā€™s fine
    2
  5230. Glad I saved the day!!
    2
  5231. Itā€™s Troyā€™s project, And it could be a fun toy. I canā€™t abandon it.
    2
  5232. Wordsā€¦.
    2
  5233. šŸ¤™
    2
  5234. Yellow dot goes near the valve stem
    2
  5235. Oooh sry for your crap day. šŸ˜”
    2
  5236. Oops šŸ˜¬
    2
  5237. Storm ws 1st
    2
  5238. Go to channel page on a desktop. In the About section I have my PO Box address. I canā€™t post it here the bots will see it and spam mail me. If you canā€™t find it, e mail me. Thanks!!!! šŸ™
    2
  5239. My old blazer blew a line one night while I was out fishing, I drove it home. Downshifts and parking brake saved the day
    2
  5240. This one was from another life long ago. The boosters are always on the firewall behind the brake master cylinder. They have a pushrod that passes through the firewall and connects to the pedal. Itā€™s there to assist the drive with applying the force required to create hydraulic pressure to the wheels, thus making braking possible without huge amounts of effort from the driver
    2
  5241. This one is older, I was camera shy
    2
  5242. They have stingers
    2
  5243. lol looks like I had an editing fail, Iā€™ll fix before I post this one (Itā€™s unlisted right now)
    2
  5244. I can be neglectful off those little things that arenā€™t significant
    2
  5245. I left it there just for you! šŸ¤£āœŒļø
    2
  5246. Enforcement would be the issue here
    2
  5247. Itā€™s a scientific term
    2
  5248. I prefer new ones in the rear. Customer wanted them on the front. And no Alignment
    2
  5249. They probably wouldn't be rusted on, so no hammering needed.
    2
  5250. I dunno, We couldnā€™t find them for $17! Btw, these rotors were $80 each according to the customer. He bought it own parts.
    2
  5251. No tabbed washers. Itā€™s true. Some of my personal trailers are the same way
    2
  5252. I don't think there is a different way. Brakes like these used to be standard years ago on domestics that had a frame, (80's and 90's) and that's how they told me to install them. I think they can be left alone and not bent, buy they'll move around and could make noises.
    2
  5253. If it were a vehicle that would never be ok. I guess its acceptable on trailers. A couple of my own trailers also do not have a tabbed washer behind the nut.
    2
  5254. Ā @InsideOfMyOwnMindĀ  šŸ¤£šŸ¤£šŸ¤£
    2
  5255. Such a pessimist šŸ¤£šŸ¤£šŸ¤£
    2
  5256. I need it at the house/ not really the best tool for moving cars. Iā€™m thinking of using one of the old mowers for a tug
    2
  5257. Nooooo
    2
  5258. It's worth it to get the rust free trucks, and truck beds.
    2
  5259. I prefer that vehicle owners do not see this type of thing, they canā€™t unsee it and haunts them, this applies more to folks who have mfr warranty
    2
  5260. It has some weird buzzer that does t shut off unless the key is quickly cycling I dunno y
    2
  5261. It has this really weird little cork, where the underdash buzzer does not stop unless you quickly cycle the key. I donā€™t know why and Iā€™ve never looked into it.
    2
  5262. Ā @keithtruman9258Ā  I get it, but thatā€™s what happened today, and I vlog what happens, so we do something different sometimes . It is what it is friend
    2
  5263. I fixed it
    2
  5264. Meh. Everything had flaws in it. Cracking in the hoses, rotors were all wrecked, axle on the drivers side leaked. Sue I could have gotten away with keeping the bearings and hubs but it took hours to get to them. Figured it was best. I get what you mean tho.
    2
  5265. Iā€™m melting
    2
  5266. No itā€™s just used for the parking brake. They have virtually no wear on them.
    2
  5267. Sheā€™s been watching Cocomelon
    2
  5268. šŸ’Æ fatigue is real
    2
  5269. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    2
  5270. Bc it takes a crew of 3 a forklift and $1800
    2
  5271. Itā€™s itā€™s mostly AvE I really think he altered my thought process subconsciously. It canā€™t tell if I emulate Eric O or if itā€™s vise versa. We are quite similar in the head šŸ¤£
    2
  5272. I know I know. Wasnā€™t preferable, I tried to get the terminals off with lesser methods and it wasnā€™t happening. The thing was really on there. I figured no harm no foul, plus theyā€™re getting new batteries soon anyway. We didnā€™t have them in stock and they needed the truck on the road ASAP for deliveries
    2
  5273. Not usually. I consider it a preference not a practice. AND itā€™s just an excuse to neglect maintenance IMO
    2
  5274. āœŒļø
    2
  5275. I canā€™t the truck left already šŸ˜‚
    2
  5276. Low voltage system in open air where gasses canā€™t build upā€¦meh
    2
  5277. At the end, the dye injector has Pag oil with it
    2
  5278. Ā @kenore4003Ā  Dawson the AC works great, so mission accomplished
    2
  5279. Ā @Dave-ty2qpĀ  If only politicians were subjected to this much scrutiny
    2
  5280. I needed something for record an intro over. Iā€™m still out of work right now to I had to pull from the archives šŸ˜‰
    2
  5281. I think theyā€™re doing ok at work. I had a couple calls but nothing major.
    2
  5282. Coming aroundā€¦. Iā€™ll be ok
    2
  5283. Iā€™m getting there. Still out sic, I dug this footage up from the archives. šŸ¤™
    2
  5284. lol nope. The rona has failed. Iā€™m not back just yet, but soon
    2
  5285. Yā€™all know I mess with you from time to time
    2
  5286. You missed that part, they got grease
    2
  5287. I needed a scene to do the voiceover intro. (I dug this footage up for some content) And I didnā€™t have an opening scene for this jeep.
    2
  5288. Oopsā€¦sorry to confuse. I stuck that intro scene in so Iā€™d have something to use for my voiceover( Iā€™m still out with the rona and I didnā€™t have an opening scene)
    2
  5289. Youā€™re right, I goofed. (I still have rona brain right now)
    2
  5290. šŸ«”
    2
  5291. Yea I dropped the ball on that one
    2
  5292. Itā€™s actually a ray good little engine. Itā€™s no v8 but can do lite truck work. They were great in the old S-10s
    2
  5293. Had one in my old S-10, I learned a lot from that engine!
    2
  5294. šŸ˜›
    2
  5295. Now weā€™re talking šŸ¤£šŸ¤£
    2
  5296. Right!!!
    2
  5297. Cuck ur Mom without the C
    2
  5298. Yup!
    2
  5299. Always mustard, itā€™s regular yellow for me
    2
  5300. It met the specs for compatibility
    2
  5301. It's all junk now. ReeeeeeEEEEE
    2
  5302. never
    2
  5303. Nein
    2
  5304. No I didnā€™t
    2
  5305. My hat is awesome
    2
  5306. Iā€™m not sure what your news has been telling you. Fl is in excellent condition these days. As for the the declined work, they have a tire warranty and an alignment contract with another company.
    2
  5307. It was, but they declined šŸ¤·ā€ā™‚ļø
    2
  5308. Txk for the lead.. I canā€™t find any info on this thing
    2
  5309. Both are built from the GMT800 platform so MANY parts will interchange
    2
  5310. I heard about that a couple of days agoā€¦šŸ˜¬ poor car
    2
  5311. šŸ‘šŸ‘šŸ‘
    2
  5312. Not much to film really, you just hang it up and add 4 bolts. Must of the work is laying on the floor and plugging in connectors and figuring out the wire routing
    2
  5313. Sure is! Wheeew!!!
    2
  5314. Iā€™m trying to get used to it
    2
  5315. Oh yes the bulbs do use less power. But they run at a higher voltage, so those little boxes are needed to step off the volts. Theyā€™re not very good at doing that because thereā€™s cheap, and use a bunch of power to do their job, the assembly is what uses more amps/power causing the BCM shut down of the circuit
    2
  5316. I drive everything I work on. I have an opportunity to document anything is wrong like unstable handling, stalling, warning lights etc. This protects me, the business and the customers
    2
  5317. If you canā€™t beat ā€˜emā€¦join em
    2
  5318. You missed the part where I installed the wire to the fuse
    2
  5319. Exactly my man!!! BCM no longer had the load
    2
  5320. Thanks I know the music sucked ass. It was editing gone wrong and I couldnā€™t remove it. I learned something.
    2
  5321. I knew it too.. shaking hands with danger
    2
  5322. I was about to troll you back till it was thermite time šŸ˜‚šŸ¤£šŸ¤£šŸ¤£šŸ‘
    2
  5323. no use in this case, the stud broke free of the hub and was free spinning, so the lun nut and stud were cross threaded together and the stud was spinning round and round. otherwise i would have just broken the stud off with a long ratchet or the impact gun
    2
  5324. Yes I tried that to no avail
    2
  5325. Itā€™s bc theyā€™re cobaltā€¦ well worth IMO
    2
  5326. Have some!
    2
  5327. I do a lot of landscape stuff too. Love this trailer!!
    2
  5328. šŸ˜‰ do de doos will survive
    2
  5329. I like em, they tow well too!
    2
  5330. It is, but I trust you guys
    2
  5331. No need, no fuel vapors
    2
  5332. But the last one will be
    2
  5333. Do it for the views! šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    2
  5334. Both I think
    2
  5335. Because thatā€™s a dangerous situation and priority was to get truck down
    2
  5336. Ā @kevinphallusĀ  I think it was around 60 bucks, half was the cost of the sensor. I donā€™t get it either
    2
  5337. Iā€™ll do it
    2
  5338. I keep them in the same place as my eyecrometer
    2
  5339. I do actually these are snap on ratchet there about 450 bucks each. I wouldnā€™t suggest owning them for at home use but they are definitely a money maker and a time saver. Milwaukee makes a similar ratchet for about half the price but itā€™s bulkier and they donā€™t have the extended heads on them like mine do
    2
  5340. Itā€™s a little warm right now. High 80s and low 90s with high humidity.
    2
  5341. Iā€™m on the gulf coast of Florida south of Tampa
    2
  5342. Those are Snap on brand electric ratchets. Milwaukee makes a similar tool for half the price
    2
  5343. I sneak one in every now and then šŸ˜œ
    2
  5344. The gift shop at the Alamo in Tx.
    2
  5345. They twist and absorb impacts from the gun. They do not reduce torque when used with a regular wrench
    2
  5346. 50 bmg šŸ˜
    2
  5347. My algorithm loves you guys!
    2
  5348. šŸ¤£
    2
  5349. I think it was a transplant
    2
  5350. Itā€™s the live oaks, they do this everywhere
    2
  5351. I didn't destroy my socket.
    2
  5352. Donā€™t t we all
    2
  5353. Thanks for that
    2
  5354. Awesome! Thank you!
    2
  5355. It was a few videos ago, the pure Hatred was THICK! 99% of the viewers are absolutely fantastic people. ā¤ļø
    2
  5356. Keep on keepin on!!! šŸ’ŖšŸ’Ŗ
    2
  5357. Didnā€™t film it.
    2
  5358. Youā€™re not first
    2
  5359. šŸ¤£šŸ¤£šŸ¤£šŸ¤£ā˜ ļø
    2
  5360. Ā @jakejones9502Ā  Its happened to me a few times and I just donā€™t do it anymore.
    2
  5361. Because itā€™s going to change the gear lash and make it bind or cause the seal to leak.
    2
  5362. This is the way
    2
  5363. I have one
    2
  5364. Ā @tjbrowerĀ  yea dude itā€™s been a bad week so far. We had our Ridgeback put down yesterday. Had her for 11yrs šŸ˜­šŸ¦® That was a hard hole to dig
    2
  5365. I think itā€™s was AC water
    2
  5366. Yea I broke protocol on this one
    2
  5367. Yes
    2
  5368. Some Jaguars used to come with Ford 3.0 vin # U motors. Same engine that went into the Taurus and Sable.
    2
  5369. People like me more than congress šŸ˜‰šŸ‡ŗšŸ‡ø
    2
  5370. Hahaha I knew this comment would show up
    2
  5371. We really donā€™t know. I suspect it had a faulty vent, but that doesnā€™t make sense. Figured it best to clean everything and check it again next oil change. The ā€œleakā€ was more of a collection of oil and dirt that formed that paste on the axle, so the condition has been present for a while. I think it just needs a valve and I think there is a hose kit that we can install to prevent the ā€œmistā€ from coming out
    2
  5372. I couldnā€™t stop laughing when I watched the footage šŸ¤£
    2
  5373. None of that is fit for this channel šŸ¤£ I was the grill/sautĆ© guy at beachfront seafood joint. Was the time life, at that time of my life
    2
  5374. They deliver close to the OE power and yes the charge in storage does deplete after a few days. Theyā€™re a good battery for what I do bc I donā€™t constantly run the tool. However in a construction setting itā€™s probably best to keep with the OE battery
    2
  5375. I have the van (done now) the Jag, a Buick, a Ram 2500 and a Kia
    2
  5376. Ā @shawnhukĀ  Thank you for the comment!
    2
  5377. You too buddy. Hope you have a great holiday!
    2
  5378. They were already installed on the new coils
    1
  5379. The new coils had new seals, go back and look
    1
  5380. According to some
    1
  5381. Iā€™ll just tell ā€˜em it was in the script šŸ˜‰
    1
  5382. šŸ¤£šŸ¤£šŸ‘
    1
  5383. Try eBay
    1
  5384. šŸ¤¦ā€ā™‚ļø
    1
  5385. The company lists the parts on EBay, I donā€™t recall the name.
    1
  5386. Thereā€™s a big fan there that blows air into the left side of the shop. I roll it into the doorway
    1
  5387. Itā€™s all good fellas, the pins are in šŸ‘šŸ‘
    1
  5388. Hahahah itā€™s all good here. My little creatures ALWAYS get Dad time!!
    1
  5389. Body shops do this, legislation allows it. Votes have consequences
    1
  5390. Regardless of who did the work, itā€™s no longer making noise
    1
  5391. Waste management does that. Recyclables are worth money.
    1
  5392. I think youā€™re taking it a little too seriously. Nobodyā€™s life was in danger here. And no the body shop didnā€™t pay twice
    1
  5393. Livin on the edge šŸ¤£
    1
  5394. Yea itā€™s fine
    1
  5395. Ā @RekuzanĀ  they have some leather and descent stitching. Theyā€™re not red wings or anything like that by any means though. I wouldnā€™t wear them on a construction site or any heavy duty environment.
    1
  5396. Ā @RekuzanĀ  I have a pair of sketchers high tops with steel toe. Those are usually what I wear, itā€™s well worth the extra weight when that steel does itā€™s job!!
    1
  5397. It feels like they died šŸ˜“ Itā€™s a situation that canā€™t be processed or worked outā€¦very sad
    1
  5398. I have been. I tend to push really hard but I canā€™t go like Iā€™m in my 20s anymore
    1
  5399. He quit a couple weeks ago. The vid with the ā€œI quitā€ thumbnail has a storytime
    1
  5400. Good to know thx
    1
  5401. Itā€™s an industry standard phrase (I use it in good faith and jokingly) At least I donā€™t call it the idiot light šŸ’”
    1
  5402. Yea they were gettin down with it šŸŽ¶
    1
  5403. I like 1/4ā€ itā€™s lite and fast
    1
  5404. Ā @Project-gr6zyĀ  oh sir we donā€™t have room for emotion with it comes to destroyed machines. Thereā€™s no need to sugar coat it. We simply state facts and supply them with all of the information possible so they can make their own adult decisions.
    1
  5405. Yea it needs and engine and transmission
    1
  5406. Topside creeper is hard on breathing and reaching
    1
  5407. yea it got me pretty bad LOL
    1
  5408. grey poupon
    1
  5409. Didnā€™t have any šŸ¤·ā€ā™‚ļø
    1
  5410. valve was open! It just wouldn't flow
    1
  5411. Ā @Chris03121957Ā  Sounds familiar ā˜ŗļø
    1
  5412. Itā€™s not going to survive
    1
  5413. Do you now? Perhaps I can assist
    1
  5414. Glad youā€™re here! šŸ˜‰
    1
  5415. Powerstroke TechTalk W/AROD had a livestream every Wednesday at 9p ET. Weā€™re always there
    1
  5416. Really, I thought they just sold parts
    1
  5417. Yes but I like to chop up words for fun
    1
  5418. Regardless
    1
  5419. I was telling a story, then made the title. Itā€™s šŸ‘Œ
    1
  5420. Iā€™m from the future
    1
  5421. If you know, you know šŸ˜‰
    1
  5422. Itā€™s a bluepoint / snap on set. Look in eBay PN blpthc87
    1
  5423. Gun oil šŸ˜‰
    1
  5424. Whaaat?
    1
  5425. 1990 Ford E350 retired airport shuttle bus, that was used for daycare van. It lived at the shop, and they wouldnā€™t replace it. They had three of them
    1
  5426. You should see what a ā€œCab offā€ job looks like
    1
  5427. That I made a mistake, And then replaced the part that I threw away at a cost of over $300. There was no malicious intent, therefore the customer wasnā€™t a victim of foul play.
    1
  5428. We did that
    1
  5429. Did it even watch the video? I believe youā€™re a paid troll. Do better.
    1
  5430. YeS i mAke rEpaIR on cAr a/cā€¦!!!
    1
  5431. Approximately
    1
  5432. Good job on missing the part where I said the shim wasnā€™t exactly sized perfectly and needed some persuasion to get it to seat. Pads didnā€™t go on bc the shim was in the way, when the pieces were fit everything moved freely.
    1
  5433. I donā€™t do it, bc it just gives a place for brake dust to build up into a nasty ugly grease ball
    1
  5434. šŸ¤£šŸ‘
    1
  5435. Thatā€™s the situation
    1
  5436. Ordered
    1
  5437. I did. Error was verbally corrected later
    1
  5438. It is . I fixed what I said later in video. Linguistic error!
    1
  5439. They do have the cold weather high idle feature but itā€™s not enabled to use on demand. I think it can be turned on or off through the gauge cluster menu but it only works below 37*f
    1
  5440. It ws bug killer spray, Iā€™ll just leave that there
    1
  5441. Iā€™m going to start tweeting šŸ¤£
    1
  5442. Order some LAVA soap. It comes in bars made by WD-40. Itā€™s hard to find but very good.
    1
  5443. I wish I could heart this one twice šŸ¤£
    1
  5444. Do de dooo de dooo!!!
    1
  5445. šŸ˜­šŸ˜­šŸ˜­
    1
  5446. I havenā€™t figured that out yet, I can say I was defiantly in a weird mood whenever made this onešŸ˜ could have been way too much coffee
    1
  5447. Most have them now. Theyā€™re copper or aluminum. GM and a few others still use rubber
    1
  5448. You nailed it!
    1
  5449. šŸ¤£
    1
  5450. šŸ¤£šŸ¤£
    1
  5451. Got it šŸ™ƒ
    1
  5452. I havenā€™t assembled it yet šŸ¤·ā€ā™‚ļø
    1
  5453. Thatā€™s it!!! šŸ¤¦ā€ā™‚ļø
    1
  5454. Duramax 6.6 lbz and Allison 6 speed
    1
  5455. The interlock sticks sometimes
    1
  5456. Not I šŸ¤£
    1
  5457. šŸ‘€
    1
  5458. I accept the things that I cannot change
    1
  5459. The universe definitely gave me the finger on this one. šŸ¤£
    1
  5460. Youā€™re right
    1
  5461. Go to first video to the part when I rechecked my work šŸ˜‰
    1
  5462. @ there was a recent iOS update
    1
  5463. Especially me
    1
  5464. I'll do New York next
    1
  5465. Right on!
    1
  5466. Terminator 2
    1
  5467. Come with me of you want to live!
    1
  5468. šŸ˜ˆ
    1
  5469. Email up from my website RainmanRaysRepairs.com and we'll get it to you.
    1
  5470. NO you cant dry sand it will melt the plastic
    1
  5471. But she said she put oil on her headlights šŸ¤·ā€ā™‚ļø
    1
  5472. Ok
    1
  5473. I still have it because of the holiday.
    1
  5474. Ā @skismosisĀ  Thanks for being here as well. āœŒļø
    1
  5475. Mine is an R134a machine, this car takes 1234YF refrigerant
    1
  5476. šŸ˜±
    1
  5477. Later
    1
  5478. No Iā€™m not
    1
  5479. Made overseas now NOT a Buick anymore
    1
  5480. We shall see! Thanks so much for the insight!
    1
  5481. Whaaaaaat happened?
    1
  5482. šŸ˜
    1
  5483. That will get you killedā€¦ Just sayin
    1
  5484. I didn't notice that
    1
  5485. I do t have one yetā€¦
    1
  5486. Floor friction so they donā€™t move and also to give a slight lean so the drawers close better
    1
  5487. Holding it for a friend šŸ˜
    1
  5488. šŸ˜
    1
  5489. Yes itā€™s an assault blow gun. šŸ˜‰
    1
  5490. I like this rule, in going to start using it. Sounds accurate in my experience
    1
  5491. I can use 5w-20 also
    1
  5492. Bc someone is packaging them wrong
    1
  5493. I prefer the term Lizard Lotion šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  5494. Yea itā€™s fine
    1
  5495. They started it!!!
    1
  5496. Gotcha, rewatch the opening scene šŸ˜‰
    1
  5497. Get it brother!!!!
    1
  5498. Skymiles card for the win
    1
  5499. Yesss
    1
  5500. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  5501. I like tools
    1
  5502. Sure did, check the opening scene šŸ˜‰
    1
  5503. All Amsoil grades meet or exceed the Dexos specs. Go with signature series.
    1
  5504. What is problem?
    1
  5505. Opening scenešŸ˜‰
    1
  5506. Thanks for checking
    1
  5507. Ā @kevinleightonukĀ  Itā€™s not greed at all. The reality is, I have taken considerable risk. The merchandise company has employees AND monthly expenses. If I donā€™t sell shirts they donā€™t have jobs. So I have to continue to let people know about it to drive sales.
    1
  5508. Did that in part 1 šŸ˜‰
    1
  5509. Lived on Oahu back in 2015, I was very sad to hear about the fires.
    1
  5510. You the man Steve!! TY much!!!!!
    1
  5511. You are 100% correct on the ā€œnoā€ votesā€¦ But I have to inquire, what else packed was into that bill? Iā€™ve learned long ago that the name/title of a bill seldom relates to the contents of said bill. Thats why we need single issue legislation, tired of unrelated matters being interjected in to a bills that sounds great at face value.
    1
  5512. Bradenton
    1
  5513. Who?
    1
  5514. Yes it meets the criteria, full frame, solid axle, v8 4x4
    1
  5515. Those cleaning/flushes are great to prevent buildup but not a requirement, thatā€™s just the sales people trying to make a sale
    1
  5516. Sure do
    1
  5517. Here we go šŸ˜¬
    1
  5518. It's the N Koreans launching solar flare creating EMPs
    1
  5519. Nooo why???? Wtf would do such a thing šŸ˜¢šŸ˜ž
    1
  5520. Around $5800 for a used one installed with fluids and miscellaneous items
    1
  5521. It started didn't it? šŸ˜
    1
  5522. So you wonā€™t be subscribing to the channel?
    1
  5523. Not sick anymore itā€™s just the pollen floating around, itā€™s very high this year
    1
  5524. Thank you! Really good ideaā€¦ordered one
    1
  5525. Welcome back again. YT is broken šŸ˜ž
    1
  5526. Yea but the head I is shaped like a banana now and itā€™s more costly to put heads in it than it is to throw a used motor in it. When itā€™s junk itā€™s junk so even IF I deliberately blow it up more, thereā€™s no loss
    1
  5527. Sryā€¦the AI is all over the place right now šŸ˜¬
    1
  5528. So very true!!
    1
  5529. Remember the new ignition coils? Cat damage is usually caused by excessive heat from fuel in the exhaust caused by misfires
    1
  5530. ā€œRules for thee not for meā€ - all gov ever
    1
  5531. šŸ¤«
    1
  5532. Alldata
    1
  5533. I was just testing the Flukes durability
    1
  5534. Late today huh Rodger
    1
  5535. You're no idiot. The fuse is a path for electricity to travel and its designed to blow of too much power is passing through it. This is measured in amps. Think of a wire as a garden hose but for electricity. Volts is the water pressure and amps is the amount of flow. With the fuse removed, I was able to connect the two wire leads to the pins in the fuse box. Those leads were then connected to the meter, as the the meter has a feature where it can measure the amount of amps going through the circuit, this is usually up to only 10 amps. The power comes in through one lead, passes through the meter and leaves through the other lead. So when the meter was connected, it was acting like the fuse normally would and it allows us to measure the power moving though it.
    1
  5536. I didnā€™t break it, it was already like that šŸ¤£šŸ¤£
    1
  5537. All of them
    1
  5538. Iā€™ve never had the meter apart so Iā€™d assume itā€™s the correct fuse, but it pulled 25a for several seconds until I figured out the wires were cooking. I also figured the fuse in the meter would have blown after 3-4 seconds of that kind of load. Maybe itā€™s a defective fuse. Iā€™ll open the meter to find out
    1
  5539. Go to description, itā€™s the one that says part 1
    1
  5540. How do you know if everyone knows? Maybe Iā€™m thinking about those of us who donā€™t yet knowā€¦ itā€™s that or Iā€™m intentionally demeaning towards people by the thousands
    1
  5541. Canā€™t please everyone šŸ¤·ā€ā™‚ļø
    1
  5542. Close, no profit on oil services I think the store makes $7
    1
  5543. Society has low standards I guess šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  5544. No. I do the filter first because sometimes the funnel clogs and not realizing it, one can drop the filter in, and cause a huge splash
    1
  5545. I will do my civic duty if supplied with JB stickers! šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  5546. We are many šŸ˜‰
    1
  5547. Let us know when invasion plan Beluga takes place, we will join you. šŸ˜‰
    1
  5548. šŸŽ¶
    1
  5549. It would help, but it would probably double the price of the filter
    1
  5550. 7.3l international diesel V8 with a turbo. They fell out of production due to emissions requirements years ago. Very reliable engines. Iā€™ve never owned one but they probably returned 13-16mpg 6km/l (Keep in mind thatā€™s for a 3 ton truck)
    1
  5551. And this was before inflation was at 40% errrrr I mean 8% Yea thatā€™s it, 8%! Thatā€™s what they said right? Because cost of everything defiantly hasnā€™t increased more than 8%
    1
  5552. And MUCH thanks to you!! šŸ˜Š
    1
  5553. Noted!
    1
  5554. Ā @topherd1011Ā  The party is nonsense, the principles are solid
    1
  5555. Donā€™t text me. The telegram thing is a scam and fake account!
    1
  5556. šŸ‘šŸ‘šŸ˜‰
    1
  5557. Totally messed up in the head right now. šŸ˜¬
    1
  5558. The storm changed direction and went east, which was against the projections leading up to landfall. People were evacuating from the north down to Fort Meyers. They had about 12 hours to evacuate. The situation was and still is being handled in the best possible ways. The news is putting a political spin on things and they are wrong.
    1
  5559. Future project
    1
  5560. Havenā€™t had the opportunity
    1
  5561. Usually this kind of stuff ends up on my second channel. It's this or nothing till after SEMA
    1
  5562. The trailer itā€™s own business šŸ˜ I donā€™t spend a dime unless the asset can provide 2 to 3 functions for me, and I only spend money on things that can make or save future money. (Except sunglasses , goofy hats and my ATV, but thatā€™s been around for a while)
    1
  5563. Long term project, it's budgeted
    1
  5564. You're not wrong, I've been chasing the low spots for six years. You should have seen it during the first wet season
    1
  5565. šŸ¤£šŸ¤£
    1
  5566. Soon
    1
  5567. I've been towing often, it takes much fuel to move around that kind of weight
    1
  5568. Yup, truck trailer and cargo. 24400 lbs. Almost at the legal limit
    1
  5569. šŸ’µ
    1
  5570. Links in description
    1
  5571. Mehh šŸ¤£
    1
  5572. We went to the west coast šŸ˜‹
    1
  5573. I sent it out, first rebuild in 4 years
    1
  5574. Itā€™s been unlisted for a few days, only available through a link
    1
  5575. šŸ˜‚šŸ˜‚šŸ˜‚šŸ¤£
    1
  5576. Nope never thought of that šŸ¤·ā€ā™‚ļø
    1
  5577. no fear
    1
  5578. Preferred new ones but they took all day so I moved on
    1
  5579. I miss driving it, and I need it. I have trailers to move around and things to haul
    1
  5580. I actually forgot to do it earlier. I blew it out after remembering that I forgot
    1
  5581. ATF got it šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  5582. Nope, Iā€™m not interested in DPFs and DEF injection. And Iā€™m not interested in an $80,000 depreciating asset.
    1
  5583. How did you find out? šŸ¤£ I bet it was Facebook
    1
  5584. Fired loves the 5.5
    1
  5585. It still needs fuel injectors, it has the originals
    1
  5586. Readingā€¦.
    1
  5587. Look for Butyl insulation and Automotive Sound Insulation
    1
  5588. Canā€™t right now, the entire harness and fuse box is disassembled
    1
  5589. šŸ¤£šŸ¤£
    1
  5590. Iā€™ll get to it!!
    1
  5591. šŸ˜ˆ
    1
  5592. Lol bet he would have used a chainsaw
    1
  5593. It has very good seals, Iā€™d call it weather resistant
    1
  5594. Thatā€™s why I make sure to get my extra 90 gal before the storms
    1
  5595. 10-4
    1
  5596. 10-4
    1
  5597. Ty. Iā€™m going to ditch the mic I think
    1
  5598. Itā€™s for golf cart motors
    1
  5599. Challenge accepted
    1
  5600. Ebay
    1
  5601. Youā€™re 1000% correct. Most meters are only capable of measuring up to 10A. I have an external amp clamp that can range up to 400 A DC and itā€™s designed to use the mill volt range on the meter.
    1
  5602. Ā @TrentJordan3198Ā  šŸ¤¦ā€ā™‚ļø I knew it, thx!
    1
  5603. Fat Bastard from an Austin Powers movie said so Edit:Goldmember
    1
  5604. šŸ‘
    1
  5605. Yes I do! I hold my breath and stay upwind! That stuff gives me respiratory infections if I breathe it.
    1
  5606. Then I wouldnā€™t work for you
    1
  5607. Thank you!
    1
  5608. Thank you!
    1
  5609. No Anti-seize in Florida. Leave that to the rust belt šŸ˜‰
    1
  5610. Snap on PN LN47CF. Theyā€™re awesome!
    1
  5611. No no thatā€™s already lubed
    1
  5612. Im not a turn and burn shop, so one person per stall doesn't fit my model
    1
  5613. I need that lift for me so i can have two cars at the same time again
    1
  5614. Spec sheet says Dex 6, and LV HP meets spec, and the BG
    1
  5615. It was a fix for a shudder on the 6l80s and 6l90 but as per GM it only applied to the Sierras and Silverados NOT the tahoe, Yukon and Escalade (if memory serves) The BG fluid that I use meets the same specs as the Dextron that's also approved for the 6l80
    1
  5616. Waiting on a bypass part
    1
  5617. Maybe, but our LEOs donā€™t micromanage down here
    1
  5618. Really Disney?
    1
  5619. Itā€™s my toxic trait
    1
  5620. Home Depot. Iā€™m disappointed
    1
  5621. Ohhh no no no!
    1
  5622. Sorry to confuse. That was just me driving home šŸ˜‰
    1
  5623. Wait! You have bears?
    1
  5624. šŸ˜³
    1
  5625. Before the Jeep and the Ocala trip
    1
  5626. I wish I would have known šŸ˜”
    1
  5627. Sry buddy. Iā€™m in sunny Fl
    1
  5628. Right!
    1
  5629. Youā€™re welcome
    1
  5630. We have resorted to sending someone from our own shop to drive around to collect parts because the parts stores do not have delivery drivers. We are in a false economy
    1
  5631. .7
    1
  5632. All of it!
    1
  5633. I feel for you. It the turbo version?
    1
  5634. Perhaps you missed the comment about a psi test giving no results. I wouldn't consider gaining visual access to confirm the leak source a guess.
    1
  5635. Tired that could find the drop. I didnā€™t guess, I went in and found it
    1
  5636. Itā€™s not, just havenā€™t listed it yet šŸ˜œ
    1
  5637. So I could fit the socket the nut
    1
  5638. Sure itā€™s
    1
  5639. Yes
    1
  5640. No can do, theyā€™re sealed in
    1
  5641. No those DURAMAX engines run a little low at idle. Had the same Psi for years and never a problem
    1
  5642. Really?
    1
  5643. Disdain? Ooohhh no I donā€™t Harbor negative feelings towards people whose lifestyles and personalities could be considered ā€œliberalā€œ as a libertarian this is not in my nature. With regards to politics, I have a huge problem with regards to authoritarianism, And the use of tactics to tip the scales of checks and balances. With regards to my content, I just donā€™t like waste. Conservation of resources and assets rank high with me
    1
  5644. You're reaching a little far just to be offended
    1
  5645. Iā€™m calling your bluff
    1
  5646. I asked what it was
    1
  5647. Itā€™s an electric motor that operates a hydraulic cylinder. Thereā€™s fluid in there, itā€™s just not serviceable.
    1
  5648. Nope, Iā€™m strike free. Itā€™s a glitch in the matrix
    1
  5649. Bruhh
    1
  5650. I do get to have an opinion on things right?
    1
  5651. I donā€™t delete or censor commentsā€¦free speech and all
    1
  5652. ThisšŸ‘†šŸ‘†šŸ‘†
    1
  5653. Thatā€™s TY doing googles bidding šŸ¤·ā€ā™‚ļø
    1
  5654. Nobody keeps hardware anymore times have changed
    1
  5655. Now I know that Brandon Herrera calls his viewers ā€œmother loversā€ šŸ¤£šŸ¤¦ā€ā™‚ļø you guys kill me
    1
  5656. You type too much
    1
  5657. Lol I know. But the sudden light changes really bothers people and makes the video harsh. and I thinks itā€™s funny
    1
  5658. This one didnā€™t have holes, I was disappointed over this
    1
  5659. šŸ˜‰
    1
  5660. šŸ˜
    1
  5661. Itā€™s better than cable, I have fewer commercials. Careful, you could be in danger of learning something šŸ¤™šŸ˜‰
    1
  5662. Yea the value was 100% on with the fuse open, and with the new fuse. Meaning the open fuse didnā€™t have anything to do with ecms requested duty cycle. Even with the new sensor installed, Max value was still requested, meaning that the problem is in the circuit, not the sensor.
    1
  5663. ā€œBeating a dead horseā€ on this side of the pond šŸ‘
    1
  5664. šŸ˜³ (forgive meā€¦ what is a grifter?)
    1
  5665. None were available. Equipment is in short supply right now after the hurricane
    1
  5666. Itā€™s a 14k trailer and trailer weighs 4200. Iā€™m under 26001. Should be legal right? Edit, Iā€™ve loaded 5yds crushed concrete in weighed it. I came in at 24400 (assuming the concrete was 2000lbs/yd like they said.
    1
  5667. šŸ‘šŸ‘
    1
  5668. Itā€™s all junk! šŸ¤£šŸ¤£šŸ¤£
    1
  5669. Nopeā€¦itā€™s been pre sighted in and has cameras
    1
  5670. šŸ‘šŸ‘
    1
  5671. Theyā€™re too short I have new ones but havenā€™t replaced them yet
    1
  5672. Look a stock market comment bot šŸ‘†
    1
  5673. Did you miss the part where I said I didnā€™t charge full price?
    1
  5674. Nope
    1
  5675. All of my shoes and boots are wet
    1
  5676. Made a video on it the other day
    1
  5677. I ordered the metal flex lines, it will look nice and install a billion times easier AND I can eliminate the rubber lines that like to leak
    1
  5678. Powerprobe PPMWL1000
    1
  5679. As a man who has created more people in this world, I can tell you that that from the moment of conception, I felt their life force. Mom says the same thing. Those are people with a spirit and a soul. One can deny faith and ignore the creation of a human being. Common line, theyā€™re alive before birth.
    1
  5680. The square one? Itā€™s made by powerprobe.
    1
  5681. Weā€™re getting the hang of things. Itā€™s stressful having payroll, even more stressful having to make payroll
    1
  5682. Moral support
    1
  5683. I shall look šŸ«”
    1
  5684. Itā€™s the same. At this point I feel like Iā€™ve done my part. I was in early now others have organized so Iā€™m backing off. Need to get back to business now.
    1
  5685. Yesss !!!
    1
  5686. Ā @AKChryslertechĀ  caution, theyā€™re really easy to loose once the battery dies.
    1
  5687. Powerprobe makes them, theyā€™re quite handy
    1
  5688. Oohh wtf šŸ˜³
    1
  5689. Ā @jefferybye2169Ā  Jokes on you Jeffey, you keep coming back to troll, and I get more views! šŸ˜˜ But seriously do you need a hug or something? You must have been hurt by another YouTuber or something. This probably isnā€™t the place for you. Try Twitter, actually you strike me as the Pinterest type.
    1
  5690. Ā @jefferybye2169Ā  You really should have commented this in your original thread, that way others can follow along with how bad youā€™re about to make yourself look. Is this your first day on YouTube?
    1
  5691. Ā @jefferybye2169Ā  So why are you here?
    1
  5692. Hahah he barged in my room this morning saying dooo de dooo!! Wake up!!!
    1
  5693. I like to fill up if I can find a good price. Sometimes I run heavy equipment and I use the aux tank to refuel. It also cuts down visits to the gas station. It allows me to have extra fuel around in case of emergency such as the recent hurricane. Yes I lost cargo capacity but Iā€™d I need that much space Iā€™ll use a trailer. I can still transport plywood and lumber because I can let the tailgate down an gain back lost space. Note that itā€™s not always full to capacity to reduce overall weight. I works for me and my situation.
    1
  5694. Iā€™m a long bed crew cab. 167ā€ wheelbase a one piece would be huge. Iā€™m assuming thatā€™s the reason for the two piece shaft
    1
  5695. Iā€™m going back in later when the tube show up
    1
  5696. No he quit last week. Thereā€™s a story time in this the linked videoā€¦.
    1
  5697. Itā€™s a tie this time šŸ¤£
    1
  5698. šŸ‘šŸ‘šŸ‘
    1
  5699. Some of them are better off on the receiving end of a mag dump šŸ¤£šŸ¤£šŸ¤£
    1
  5700. Sry I sent them to some folks already
    1
  5701. Negative
    1
  5702. Yup šŸŒŖšŸŒŖšŸŒŖšŸŒŖ coming (thereā€™s on hurricane emoji)
    1
  5703. Itā€™s coming! ā›ˆā›ˆšŸŒŖ
    1
  5704. All the time
    1
  5705. I also enjoy that
    1
  5706. Bradenton FL
    1
  5707. Ā @andydodd250Ā  The YT premium has a payout too. Since add revenue is calculated by the 1000s of views, itā€™s one shouldnā€™t sit and wants them unless itā€™s appealing to them. Itā€™ll screw with the algorithm and generate irrelevant adds to the viewer. If people start doing that in mass it will devalue the platform and hurt everyone.
    1
  5708. https://youtu.be/LkEfXOBybH8
    1
  5709. Posted yet, but since you made it hereā€¦..https://youtu.be/mrTIxB9WoCo.
    1
  5710. Yea thatā€™s him. Thanks. Wired Iā€™ve been having this Problem with links
    1
  5711. Youā€™re hired! You wanna come tune my system up? It still isnā€™t right. The system fell on its face again yesterday šŸ˜•
    1
  5712. https://youtu.be/t00YZVFGRd0
    1
  5713. TY will censor us if we use the correct word
    1
  5714. Much thanks to you! Teamwork!
    1
  5715. Lol I'm trying to figure out how to blow it up more without damaging anything else
    1
  5716. And thank you!!!šŸ™
    1
  5717. So nice of you! Thank you much for pitching it! šŸ¤—
    1
  5718. Bryan thank you good sir! We really appreciate it! šŸ«”
    1
  5719. Thank you as well Galen!
    1
  5720. šŸ«‚ hugs
    1
  5721. Thanks a million James, much appreciated
    1
  5722. You could use Paypal @RainmanRaysRepairs RainmanRaysRepairs@gmail.com
    1
  5723. You must be new here
    1
  5724. šŸ˜‰
    1
  5725. Itā€™s still super cool!
    1
  5726. Itā€™s happens before! Iā€™ll show you the engine later
    1
  5727. šŸ¤£šŸ¤£
    1
  5728. I didnā€™t mean to do thatā€¦ sry VGG!! šŸ«‚
    1
  5729. I threw them away before anyone noticed šŸ¤£šŸ¤£
    1
  5730. Truth
    1
  5731. You donā€™t need to, people want to because itā€™s cheap protection
    1
  5732. MOA and Lucas stabilizer is not even close to the same product. MOA is an additive and detergent package, Lucas is a thick oil with high film strength with zero additives
    1
  5733. Many cars have this, but not everyone knows how to do it in every car itā€™s a PITA
    1
  5734. Itā€™s been months soccer I snuck in a LOF
    1
  5735. With a button
    1
  5736. Did anyone see any tears. What you call complaining is talking, attempting to create dialogue. I get your point but the delivery could use some work.
    1
  5737. There was a link to it a short filler up in the main video. Itā€™s in my second channel
    1
  5738. I donā€™t think so.
    1
  5739. No I have to buy it, then resell it. Iā€™m not in anyoneā€™s pockets
    1
  5740. You must have missed the part where it didnā€™t come out perfect
    1
  5741. Almost never
    1
  5742. Bc I didnā€™t see them at first
    1
  5743. Thatā€™s because I screwed up! Itā€™s there now
    1
  5744. šŸ¤¦
    1
  5745. Donā€™t leave me hangingā€¦why not?
    1
  5746. Weā€™re not getting rich
    1
  5747. Ā @jacobbarton3523Ā  Itā€™s actually pretty close. Iā€™ve never done a side by side test on them, but the Ridgid holds its own. Factoring in the ease of use, the electric is better to use. And it weighs less
    1
  5748. Yeeeeessss?
    1
  5749. But then I canā€™t hit a Subaru with a hammer šŸ¤£
    1
  5750. That wasnā€™t a wear indicator, it was a spring thingy to keep pressure away from the rotor. Reeeeesolved
    1
  5751. Thanks to you! Much appreciated! šŸ™‚
    1
  5752. Look on Real Truck . Com
    1
  5753. Maybe later
    1
  5754. It'll get ya!!
    1
  5755. later, I dont want to dig into that harness to fix the splice connectors
    1
  5756. No I already have a gooseneck hitch, just no gooseneck trailer
    1
  5757. Heā€™s in my trailer right now
    1
  5758. I said "click"
    1
  5759. I says "Under Distress" on unde the flag. Flying a flag upside down indicates distress (from back we we fought wars in forts)
    1
  5760. LOL
    1
  5761. I would like to see that one!
    1
  5762. Yea but theyā€™ll take longer
    1
  5763. I'm just going to get another one
    1
  5764. I didnā€™t put them there!!
    1
  5765. You mean the roach? You should see what Iā€™ve done to fish
    1
  5766. We all have at some point šŸ¤£
    1
  5767. I had a engine once that did that to me. 6.0 ls swap turned into a 6.0 build, then swap
    1
  5768. Check out Real Truck .com and Etrailer .com . Itā€™s a Curt hitch, and I think the receiver is also a Curt. Theyā€™re both 2 1/2ā€
    1
  5769. You are mistaken šŸ˜‰ on that one
    1
  5770. Itā€™s a book mobileā€¦ they just had it painted purple šŸ¤·ā€ā™‚ļø
    1
  5771. It catches the spent rivet pins (in theory)
    1
  5772. I had to give the van back, they needed it
    1
  5773. Ā @DIYDaveOKĀ  show him what happens if you donā€™t, after that itā€™s out of your hands šŸ¤·ā€ā™‚ļø
    1
  5774. Going longer will be a mistake
    1
  5775. who said my can of EPR was expensive?
    1
  5776. must have been my southern accent seeping through
    1
  5777. You missed the other 80% of it that had nothing to do with oil
    1
  5778. Thats why I installed Amsoil rather than some mid grade
    1
  5779. waiting on the injectors
    1
  5780. It's full syn only I think, Check my Amsoil link in the description, they have fluids for ATVs
    1
  5781. Your comment seems like its out of line šŸ¤Ø
    1
  5782. Sorry for your loss
    1
  5783. What happened?
    1
  5784. The epr is a solvent
    1
  5785. They just get recycled now. I donā€™t see them much anymore, where there is a core/return
    1
  5786. šŸ˜‰
    1
  5787. I call split pins, roll pins. Ig we all have several names for everything šŸ¤™
    1
  5788. I raised them bc of ball joint play. Abs these ball joints arenā€™t serviceable. Meaning the whole arm to be changed
    1
  5789. Itā€™s was just a conspiracy theory a decade ago, now there are lawsuits over it. I swear weā€™re living in the Hunger Games
    1
  5790. None, thereā€™s nothing to monitor it
    1
  5791. You bought an $80,000 car bc other peoples cars make sounds?
    1
  5792. The thermostat is already gone
    1
  5793. Brahhh
    1
  5794. Gotcha
    1
  5795. Nooo
    1
  5796. It actually did šŸ¤£šŸ¤£
    1
  5797. In any commercial space, the tenants find the buildout. Door cost a couple thousand, buildings cost a couple million
    1
  5798. You just said it. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  5799. Sometimes the vac pulls more on the caliper side than the psi from the master. So pulling the line off with the bleeder open can cause a bit of air to come in. I just try to avoid that by briefly closing the valve
    1
  5800. Iā€™m in Florida, those are a suggestion here, like Texas
    1
  5801. No no noā€¦ Thank YOU šŸ˜Š
    1
  5802. Bc the police were in the video
    1
  5803. Why does everyone think that loctite goes on everything?
    1
  5804. Itā€™s actually was, I sat there for about 8 minutes
    1
  5805. Already have. Check some of the newer videos
    1
  5806. lost all my guns boating
    1
  5807. Done
    1
  5808. Thatā€™s just fine, there were some at the far end of the spectrum that werenā€™t so objective.
    1
  5809. Exactly!!
    1
  5810. I donā€™t remember who made it. I got it at a macys or Dillards in the mall last year. (At the little impulse buy section at the registers)
    1
  5811. šŸ˜³
    1
  5812. Jet lag šŸ¤£šŸ¤£šŸ¤£
    1
  5813. Good thing SEMA isnā€™t all year long šŸ‘šŸ¤£
    1
  5814. CPAs ate with their weight in gold!
    1
  5815. Yes I have relatives from my motherā€™s and fatherā€™s side
    1
  5816. I dunno about rich šŸ¤‘
    1
  5817. Iā€™m not fluent by any means. I learn a phrase and practice it. Trying to remember it from high school electives
    1
  5818. Iā€™m in Bradenton
    1
  5819. lol no, I donā€™t think so. Iā€™m really not sure what did it. Itā€™s ok now
    1
  5820. šŸ¤™
    1
  5821. I think so. But I donā€™t know when or how
    1
  5822. Shameless Sales Pitch! Check out this battery terminal brush on Amazon. Click HERE! https://amzn.to/3FDlw6V
    1
  5823. Rainman Rays Repairs 4411 Bee Ridge Rd. #305 Sarasota Fl 34233. Thank you!
    1
  5824. Patients
    1
  5825. Itā€™s permatex caliper lube
    1
  5826. Agreed!!!
    1
  5827. šŸ‘‹
    1
  5828. The accumulator/dryer is located in the tube on the side of the condenser, it's part of the assembly on many vehicles. Yes I also changed the valves, as always!
    1
  5829. Probably both
    1
  5830. Ā @billymcloughlinĀ  It itā€™s goodwill than the dealer should goodwill that extra 4.3 hr
    1
  5831. Nooooooo
    1
  5832. Iā€™ll have Mr. Troy fix it so he can gain wiring skills
    1
  5833. Itā€™s for Troy to fix
    1
  5834. Never saw that channel
    1
  5835. You canā€™t say that šŸ¤£šŸ¤£šŸ¤£
    1
  5836. I had Troy handle it
    1
  5837. Not even closeā€¦the censorship is out there like a flash mob
    1
  5838. Ā @kendiggyĀ  weā€™re in the same boat here regarding the comments. Sounds like thereā€™s an axe to grind in there somewhere šŸ¤·ā€ā™‚ļø
    1
  5839. Ā @williamlewis7846Ā  We go almost every year
    1
  5840. Ā @williamlewis7846Ā  Itā€™s great place to escape Fl in the summer
    1
  5841. I did
    1
  5842. Thatā€™s the plan!
    1
  5843. Itā€™s fine I think I can get away with it
    1
  5844. Working on it
    1
  5845. Itā€™s a strong t case and itā€™s also used with one piece driveshafts in other trucks, I dont think itā€™ll be a problem. If it turns into one, Iā€™ll build an upgraded t case šŸ˜‰
    1
  5846. No they were $500 for both. I spend more on my driveshaft šŸ¤£
    1
  5847. A new Dually will still run 80-100k, Iā€™m into this one so far at 50k including the 25k purchase price in 2018. Built not bought! Itā€™ll get a new engine one day too that will be the final upgrade.
    1
  5848. Technically, yes it is!
    1
  5849. Hey if itā€™s just dry grease or sealant itā€™ll be fine right where it is
    1
  5850. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø maybe
    1
  5851. Mid-shaft would have been a better word choice!
    1
  5852. The VGT acts as an exhaust brake when tow/haul is turned on. The Allison transmission also has a turbine brake feature while in tow/haul mode
    1
  5853. You didn't hear what that bushing said behind my back
    1
  5854. Was there? šŸ¤”
    1
  5855. Not a chance!!!
    1
  5856. āœŒļø
    1
  5857. A year later and I have an update. It hasnā€™t been a problem so far and Iā€™ve been running extra life Amsoil. I plan up upgrading again to an Amsoil Bypass Filter kit
    1
  5858. It is synthetic
    1
  5859. I think so šŸ˜…
    1
  5860. šŸ˜­šŸ˜­šŸ˜­ā˜ ļø
    1
  5861. šŸ˜³šŸ˜³šŸ˜³
    1
  5862. šŸ’Æ
    1
  5863. I donā€™t have the one for heavy duty filtersā€¦yet
    1
  5864. What if I cut one open and find a pot of gold? Or a unicorn? Youā€™ll regret missing it
    1
  5865. šŸ¤£šŸ¤£šŸ¤£
    1
  5866. Blackstone Labs
    1
  5867. We have one in the lot that burnt down šŸ”„šŸ”„
    1
  5868. LOL
    1
  5869. Useless Feature? Adding Wires to a $1300 ECM 6.6 Duramax Lbz Sierra Silverado https://youtu.be/7f9Wn5w735U
    1
  5870. Thereā€™s how the rings are broken in, variable loads and rpm
    1
  5871. ok
    1
  5872. It's a 1977 Corvette with a cobra body :)
    1
  5873. Frame rate of the camera vs the lights in the cluster
    1
  5874. Because I have extra starters
    1
  5875. I've has some lab tested before and its very good oil
    1
  5876. Head out of gutter, this is a family channel
    1
  5877. šŸ¤£
    1
  5878. Negative
    1
  5879. I couldnā€™t find them at the parts store, got them from xtremediesel . Com
    1
  5880. Ā @FollowingtheCliffNotesĀ  go watch Scotty then šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  5881. Ummm I scheduled it but selected tomorrow at 6am šŸ„²šŸ™ƒ. Oops
    1
  5882. Itā€™s the same type of fluid with different dye additives
    1
  5883. Ok
    1
  5884. That's what I hear lol
    1
  5885. It's going to cost you lol
    1
  5886. Itā€™s structurally sound because I welded around the cut so the flange canā€™t move.
    1
  5887. Water-in-Fuel warning switch
    1
  5888. My filters have a red tint šŸ¤£ you are correct sir
    1
  5889. I almost never wear them. But my eyes have been dry for a few days
    1
  5890. This I do not know
    1
  5891. NICE! Good to know! TY
    1
  5892. I said to ā€œeach his ownā€ šŸ¤™ šŸ¤£
    1
  5893. I flipped it over and shook the pieces out
    1
  5894. šŸ¤Æ blows my mind!
    1
  5895. Lol, you commented too early šŸ˜‚
    1
  5896. Ā @bobpeters3848Ā  Itā€™s good to have these kinds of dialogs. Sharing experiences is how we gain a broader perspective in things. I never mean to offend others. I canā€™t help to question how we have a labor shortage, and simultaneously have high unemployment. Perhaps itā€™s due to pay rates and skill levels? Have high paying and high skill job availability need reduced? From what I see here in Fl, we have a blue collar labor shortage. Many of these these are $60-80k/yr positions. I understand the situation is complex with many moving parts.
    1
  5897. Bob, that was generalization, not so an absolution. But itā€™s realistic. Workers are in short supply. Many of my customers are business owners, brick and mortar retailers, contractors, etcā€¦their number one gripe is that they cannot find employees. We have prime locations gas stations closing at 8 pm on Saturday night bc they only have one employee, businesses reducing operating hours and days open because of labor shortages, not to mention now hiring signed all over town. Iā€™ve personally seen it from Florida all the way up to Wisconsin.
    1
  5898. Yes
    1
  5899. Weā€™re all here, because weā€™re not all there
    1
  5900. I tried to post early to throw Cliff offā€¦ it didnā€™t work
    1
  5901. Who did I put down?
    1
  5902. Iā€™m up early
    1
  5903. šŸ˜¬ It was the only one left local. If I do it again, I do it again šŸ¤·ā€ā™‚ļø
    1
  5904. Exactly!
    1
  5905. Pull it up in the phone and then cast it to the TV
    1
  5906. Ohhh noooo!
    1
  5907. I barely got any rain, we would have gladly taken some. Half of Fl is underwater and half a drought
    1
  5908. The AI is changing right now and I donā€™t want to upset SKYNET
    1
  5909. Ā @matthewwalter67Ā  Made it from a blow gun that I got from the tool truck. Long shank and a pistol grip handle on the blow gun. Bought a ruger 10-22 stock from gun broker and used a die grinder to make it fit. Secured everything with zip ties
    1
  5910. Ya caught me red headed through the monitor šŸ¤£šŸ¤£šŸ™Œ
    1
  5911. šŸ¤£šŸ¤£
    1
  5912. Folks like the mustang
    1
  5913. Ā @ford6Ā nobody wakes up below ground
    1
  5914. Yup
    1
  5915. Flu/Rona
    1
  5916. I havenā€™t slept in years lol
    1
  5917. I like the Starbucks cans, itā€™s like super coffee. But itā€™s $3.49 a can which is insane to me. I usually get a case of Kirkland brand from Costco. Vanilla is the best.
    1
  5918. Sry canā€™t have my sunglasses. There Oakley Valve glasses, got em from the Matco truck Edit: Theyā€™re
    1
  5919. Iā€™ve heard of that situation, but I didnā€™t witness it. Regardless of whatever transpired itā€™s not my place to hold an opinion on it. I judge stations and people based on my experiences. Rich is an excellent technician and I appreciate him for bringing transparency to the industry.
    1
  5920. Hmmmm
    1
  5921. Thank you!
    1
  5922. Not pulling a stunt, donā€™t have time for nonsense
    1
  5923. šŸ¤£šŸ¤£šŸ¤£
    1
  5924. Iā€™ve seen what happens when someone forgets!
    1
  5925. I didnā€™t. Potential scam?
    1
  5926. Yup
    1
  5927. Yes
    1
  5928. Came with the new housing
    1
  5929. Thank you, I will
    1
  5930. I have a big mouth and no filter
    1
  5931. Remember the movie?
    1
  5932. They were from California, no one took it seriously šŸ¤£šŸ¤£šŸ¤£ Just kidding CA
    1
  5933. If you make a GoFundMe, do it for Hurricane Ian relief plz
    1
  5934. I did the uppers a couple weeks ago. LOL I have lowers now but no lift...yet
    1
  5935. I'll ban you
    1
  5936. ....you're not wrong
    1
  5937. well I do have a backup
    1
  5938. It matters bc itā€™s fun šŸ¤©
    1
  5939. Hehehe, this must have been your first visit here. You're right, pretty low skill work on this one, it happens. And yea, I waste brake clean
    1
  5940. Just sayin
    1
  5941. I dunno. IMO, the NRA is just controlled opposition, like I said. Itā€™s all politics, talk talk talk and no common sense action. Edit: the gov has no right as to what happens in my home, domicile or personal conveyance. Safe keeping laws a joke to give more encroachment into the lives a private individuals. How can safe keeping laws or training prevent crime? The whole world blames the gun rather than the individual or criminal. Criminals donā€™t follow laws so no amount of legislation will prevent gun crime.
    1
  5942. The inner city, high crime areas have them. I hate hearing about the horrors that people from other countries imagine regarding Americas gun crime. Here's my point of view. We have cities like Chicago, Boston , LA, New York etc with these astronomical gun death/injury stats. Shootings occur EVERY DAY in these places. These same places have the nations strictest gun control laws or procure and possess a firearm, including outright bans from the areas. EVERYWHERE else we're legally armed with legal weapons and permits to carry them. Most folks aren't running around shooting at each other all day. These high gun crime cities/areas are governed by the same people that say that the rest of the country shouldn't have firearms. Meanwhile, our schools are designated "gun free zones" so we don't even have the option to use or have available and equalizing force to protect our nations most valuable and vulnerable assets. Making our schools one of the easiest targets for deranged criminals that want to murder our children. Let me say that again, the gun laws won't allow us to protect our schools with guns, from murders that have guns or illegally procure guns. America has a criminal problem, not a gun problem. There are over 120 lawfully obtained guns per 100 people in the United States and we have over an estimated 1 trillion rounds of ammunition nationwide. Americans possess 43% (I think) of the global supply of small arms. If law abiding gun owners in America were the problem, the world would know it. Instead, the world is fed sensationalized stories about the horrors of gun stats in the US, how dangerous our society is, to a degree where travel warnings/advisories are issued to foreign travelers. The whole ordeal is political anyway, if our overlords wanted so solve the crime problem they could and would, but they don't, and they wont. The US has over 22,000 gun laws on the books and multiple/hundreds federal state and local agencies ranging from Boarder Patrol to the the local police departments. All they need to do is go to the source and enforce the law. But they WONT.
    1
  5943. :)
    1
  5944. Bradenton Fl. Email @ RainmanAppointments@ gmail . com
    1
  5945. YAY
    1
  5946. torque stick...look it up
    1
  5947. Believe it or not, drum brakes are becoming a lost art amongst the retail shops
    1
  5948. Donā€™t install parts for free šŸ¤·ā€ā™‚ļø
    1
  5949. Itā€™s become part of the process now IG
    1
  5950. Oh yes, lot of it
    1
  5951. Lol , sounds normal, Iā€™ll have it go watch that one
    1
  5952. The iDash data monster can record hundreds of hours on an SD card. I donā€™t have that version of the gauge, but Iā€™ll add a 3rd one later. (Two on the A pillar and one above the rear view mirrorā€¦ maybe two above the mirror)
    1
  5953. That's fine. I'm not selling. Check out the comments from the guys who build, box, and ship these condensers, they say the same thing.
    1
  5954. NOPE. It's just cheaply made.
    1
  5955. Cheaply made and Juarez Mexico
    1
  5956. Brand new never opened. I find three units just like this. It's "normal" check out the video description
    1
  5957. Yea after the bankrupty and corporate restructuring, things have been going south. Too bad.
    1
  5958. Lol negative. Not an AVE video
    1
  5959. Yes I found out this is a design feature. Not kidding. Check out the description.
    1
  5960. I swear, i didn't use a forklift or sawzall to open it. Believe it or not, went through three of them in that condition
    1
  5961. It's all junk bro this is 2021. I have run across fitment issues with aftermarket parts so I do prefer to use OEM stuff.
    1
  5962. Ā @rellik1010Ā  You could. But I gotta say Ford is about the same. I've seen 6.7 diesels break rocker arms and eat themselves alive. Bottom line, it's post 2005 era... It's all garbage. Just lease.
    1
  5963. Came that way. I found three units like that. The worse part is that they come line that now. It's a feature. Check out the video description.
    1
  5964. The world wide garage sale! Ebay!
    1
  5965. šŸ¤£šŸ¤£
    1
  5966. šŸ¤£šŸ¤£
    1
  5967. šŸ˜
    1
  5968. Danger! Think about the inside being rusted out!
    1
  5969. No joke, thatā€™s how it came in šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    1
  5970. I have a 3.0 ford diesel with a hole in the side of it. I'll tear that one down later. Should be good carnage. I think a piston flew apart
    1
  5971. Still Trolling I see. "send somebody to the local junkyard" Your assumption makes you an ASSumer. I'll do a brake fluid change tomorrow just for you. :)
    1
  5972. Not many left these days...sad
    1
  5973. Yea but by that time I knew they were junk. I'd NEVER do that on a good engine
    1
  5974. Yea but they were full of water, to need to try and save them
    1
  5975. I know that was nonsense the second I heard it. Who knows what they were thinking
    1
  5976. I sent it to Toyota for a recall, and then we have more to do when I get it back.
    1
  5977. I really want an LS for the Jeep. Plus it's not my 350
    1
  5978. I was close to the assault hammer! Those pistons were rusted in pretty good
    1
  5979. Just as bad at it was when they first made these things, just steer into it! šŸ˜
    1
  5980. šŸ¤£
    1
  5981. They really did have good looks, always have.
    1
  5982. šŸ˜šŸ¤™
    1
  5983. It gets better in pt 2. The core isnā€™t available, nor itā€™s the temp probe. Ford only sells the entire boxā€¦so yes I did šŸ¤™
    1
  5984. Itā€™s in the works
    1
  5985. Its about $50 a barrell
    1
  5986. Itā€™s mine
    1
  5987. Goodwill just resells for profit, not giving it to them
    1
  5988. good one!
    1
  5989. Ā @NixUgriBugriĀ  plus it was good a good opportunity to plant a flag šŸ˜‰
    1
  5990. Ā @NixUgriBugriĀ  ooohhh no no you good! Just adding on Edit: you did lay it on thick thoā€¦ remember vote Policy over Person šŸ˜ŽšŸ‡ŗšŸ‡øšŸ’Ŗ
    1
  5991. eTrailer sells Curt and BW Hitch towing components. BOTH are made in USA. I'm sure there are imported parts as well, like you said it's unavoidable. HOWEVER, blocking import parts leaves more market share for the domestic companies. I don't think anyone here in Team America has a problem with getting better quality parts, that are more readily available, without the hassle of sorting through knockoff/copycat imitation parts that come from the import markets. We never should have let in that fake rubber dog sh*t from the 90's, NAFTA ruined US manufacturing, and Ross Perot was right about everything. I'll take a 200% tariff on imported garbage.
    1
  5992. Ā @clbcl5Ā  thank you MOrE!
    1
  5993. Ā @sevendyseven4090Ā  šŸ˜‚šŸ‘
    1
  5994. Yea I totally planned that. šŸ™„ Or thatā€™s actually how I do business. But yea ur right that interjection was on point!! šŸ˜
    1
  5995. Dump in in the ocean at night Edit: šŸ¤£šŸ¤£šŸ¤£šŸ¤£ gotcha ! I have it collected and recycled
    1
  5996. No story on that oneā€¦but I learned the hard way once or twice
    1
  5997. I said why in video āœŒļø
    1
  5998. Itā€™s a joke, because itā€™s fun šŸ¤© Edit: I never claimed any level of maturity
    1
  5999. Easy to sell parts šŸ¤£
    1
  6000. It is in English šŸ˜‚āœŒļø
    1
  6001. Thx for lurking šŸ‘€
    1
  6002. Itā€™s was midnight and I forgotšŸ«£. Dodge really blows! Ram 1500 4x4 5.7 Hemi. https://youtu.be/0gUa-piMnHc
    1
  6003. The ram trucks are no longer called dodge. Chrysler/dodge started calling the trucks Ram and were no longer dodge. Now fiat owns ram (I think they still own it anyway) So technically itā€™s not a dodge anymore
    1
  6004. Iā€™m late to do my jobā€¦ forgot the link. Itā€™s there now for what itā€™s worth šŸ¤·ā€ā™‚ļø
    1
  6005. šŸ˜œšŸ˜œ
    1
  6006. It was the truck owner (he works here, and had too many Red Bulls that day) And yeaā€¦weā€™re lacking sometimes. šŸ¤« Sometimes turnover is good šŸ˜
    1
  6007. The proper way is to measure ride height is at the lower control arm bolts-to-floor and I believe leaf spring hangar bolts-to-floor (this will very widely) point being, no. measuring fender arch isnā€™t 100% It works for general purposes but shouldnā€™t be done for specification purposes
    1
  6008. Naaaaaaww itā€™s fine. That little impact canā€™t yield a ball joint
    1
  6009. Bc inspections are used to gain leverage over the vehicle owners and force repairs that may not be necessary, and we don't need to hand over that much authority to the state
    1
  6010. I did that when I drove it šŸ˜‰
    1
  6011. I could use some people. Come by if ur in btown
    1
  6012. Itā€™s not my car to strip and part out šŸ¤·ā€ā™‚ļø
    1
  6013. I havenā€™t tried the palm wrench yet, truth be told I didnā€™t really think the flex wrench was any good till I used it.
    1
  6014. Itā€™s from the Adam Sandler movie Big Daddyā€¦(reference to the paper on the spill) šŸ˜‰
    1
  6015. Oil on the camera šŸ˜¬
    1
  6016. What if was already back before I said I was out of town?
    1
  6017. Itā€™s going to another Miata with a blown up engine
    1
  6018. My GOD man! I'm without words right now!! THANKS TO YOU!!
    1
  6019. Thereā€™s no power outlets for the chargers at the wall
    1
  6020. Thatā€™s the procedure and itā€™s really hard to do without. I didnā€™t want to get cut up.
    1
  6021. Ā @ningen1980Ā  I think I was POā€™d over something
    1
  6022. Ā @hightttechĀ  maybe some had it, or dove didnā€™t. It could have been removed also. šŸ¤·ā€ā™‚ļø
    1
  6023. No theyā€™re reusable if in good condition
    1
  6024. It kind of is
    1
  6025. Ohh no, itā€™ll run without oil pressure. There was oil pressure, just go gauge activity
    1
  6026. K mart, I was first in my class
    1
  6027. I was intermittent, and I did clear the codes on the way out. I drive it later that afternoon and the gauge was inop again.
    1
  6028. I did šŸ˜Ž
    1
  6029. You must have missed the glove scene in my Camaro video.
    1
  6030. I have little kids, I can block out a freight train
    1
  6031. Because they have to pay for me to do that.
    1
  6032. Not fixedā€¦it randomly came on and off. Itā€™s got high resistance in a wire somewhere or possibly a bad solder joint in the gauge cluster.
    1
  6033. šŸ¤£šŸ¤£
    1
  6034. Iā€™ve ha seen the plastic ones crack and break off causing all the oil to get pumped out into the transmission
    1
  6035. Yea itā€™s intermittent, it comes on and off at random. Thereā€™s a bad connection or high resistance somewhere.
    1
  6036. I have some very nice noise cancelling headphones, but no way am I using them at the shop. Last nights stream was wild!You guys are a trip!!!!
    1
  6037. Just a shadow I think
    1
  6038. But I was angry, and I did fire the customer. šŸ¤·ā€ā™‚ļø
    1
  6039. If I ban you, youā€™re fired šŸ¤£šŸ¤£ All jokes aside, based on the guys behavior (badmouthing and lies on more than one occasion) I decided that I didnā€™t want to associate and or do business with people like that. So I removed his liability from my shop and will decline doing any work for this person in the future. Iā€™m not attempting to collect on his bill, clean cut of any and all ties. No grudges or hard feelingsā€¦.but heā€™s firedā€¦šŸš™
    1
  6040. By not ever doing business with them ever again
    1
  6041. I wasn't calling you and idiot šŸ¤£šŸ¤£šŸ¤£
    1
  6042. Yes you missed a lot. I have my own shop now.
    1
  6043. Yea but it is a cool car. I tried to buy it, good commuter car for me. Sadly itā€™s not for sale
    1
  6044. nope...customers cars
    1
  6045. the 4t65
    1
  6046. Thatā€™s the thing about narcissism, I canā€™t be combated, only rejected and ignored. Took me 36 years to learn that!
    1
  6047. Yes I know šŸ’Æ, heard it from 2 people
    1
  6048. I have a trailer hitch ball on it, didnā€™t want to remove it
    1
  6049. Ray's Auto Clinic, Bradenton
    1
  6050. I know deal with it swiftly. But I donā€™t like to participate
    1
  6051. I appreciate that šŸ«”
    1
  6052. Not usually what we do here šŸ¤·ā€ā™‚ļø
    1
  6053. This video was months and months ago, I currently have a chevy on the roll back, it's been there for three months. Look at resent videos, I guess I'm nobody Lol
    1
  6054. Bc I make YT videos šŸ¤·ā€ā™‚ļø
    1
  6055. Rayā€™s Auto Clinic, Bradenton Fl
    1
  6056. I did indeed!
    1
  6057. but the question is, how long did it take to make the comment?
    1
  6058. He looked like he knew his way around a piece of glass šŸš¬
    1
  6059. šŸ‘ø
    1
  6060. I asked, I didnā€™t tell. Itā€™s cool bro just chill! šŸ˜ŽāœŒļø
    1
  6061. I think it was nearly 200k
    1
  6062. I bet theyā€™re a money pit by now. The things are all 20 yo and high mileage. They were fairly reliable back in the day tho
    1
  6063. That was fresh water
    1
  6064. Preach it!!
    1
  6065. Youā€™re right, however the internals of the zero drive have their own patent and there are distinct changes compared to similar units
    1
  6066. Itā€™s not just GM, itā€™s every single INC. The corporations no longer fear the consumer
    1
  6067. Pull the heads off and have the machine shop do it. R&R cylinder heads goes for 7-9 hours I thinkā€¦. Itā€™s a couple thousand
    1
  6068. Ā @oldbatwit5102Ā  No what I said about the food is extremely true. Read the ingredients.
    1
  6069. Ā @oldbatwit5102Ā  A bag of potato chips thatā€™s made with ingredients/chemicals that are illegal for human consumption in most countries, costs $7.99 per bag at the grocery store. Thats by design, itā€™s not a coincidence or accident. Itā€™s us vs them.
    1
  6070. All politicians suck, weā€™re all being played from both sides. Itā€™s turning into an us vs them wake up everyone!! The system is corrupt and deep down we all know it.
    1
  6071. I billed 3.5hr
    1
  6072. Good autopsy for the second channel!!
    1
  6073. That current lineup is being discontinued for an update design
    1
  6074. Iā€™ll be more aware! Thanks šŸ˜Š And youā€™re right
    1
  6075. The corporations are in bed with the government, thatā€™s who funds the politicians. We should shrink the power of the overlords and let the free market and the lawyers put the corporations back in check
    1
  6076. Folks donā€™t realize that tires are more than just round black and expensive
    1
  6077. There are many places to find these
    1
  6078. Youā€™re looking deep into the subject and I get that. We NEED to know things like this sometimes even if is splitting hairs
    1
  6079. It has happened before šŸ¤¬
    1
  6080. I learned that if I schedule an unlisted to release, it changes the Vid to private.
    1
  6081. I group them with like fasteners and place them in piles in the lift arms. I just remember somehow. Maybe itā€™s my superpower
    1
  6082. Canā€™t get into it
    1
  6083. Nope canā€™t get into it
    1
  6084. šŸ˜³šŸ¤«
    1
  6085. I do
    1
  6086. šŸ¤£I see what you did there
    1
  6087. The fuse box wasnā€™t making connection to the relay. I was sure it was the just the bad connection, but I didnā€™t know if the customer had caused that while tinkering or if there was additional issues. Canā€™t complete and sign off on a diag with a problem staring at me in the face.
    1
  6088. The cooler for the trans is inside of the radiator tank. Itā€™s like a tank inside of a tank. Th the engine coolant flows over the trans cooler and transfers heat out of the trans fluid. Clever design, but if there is a failure, itā€™s usually catastrophic
    1
  6089. Hehehe, thatā€™s what Iā€™m doing here šŸ˜
    1
  6090. šŸ¤£
    1
  6091. It didnā€™t workā€¦. Now what genius?
    1
  6092. Lesson learnedā€¦Iā€™m new at live streams
    1
  6093. Thx Tom šŸ˜‰
    1
  6094. Yup I have a case open f for engineering
    1
  6095. Might want to leave that line out of this one šŸ¤£
    1
  6096. BINGO!!
    1
  6097. It was a catalytic converter on a 14 escape 1.6l turbo
    1
  6098. Ā @bungalowboyĀ  vacuum leaks at the intake?
    1
  6099. šŸ»
    1
  6100. That happens! I bought a fake AC delco oil filter once
    1
  6101. Peeeeta says šŸ‘‹
    1
  6102. šŸ˜³
    1
  6103. You missed the part where they were driving it around for days with two coils barely firing
    1
  6104. Perhaps, however it was already DOA and not worth fixing. So we figured weā€™d blow it up before recycling it. šŸ¤·ā€ā™‚ļø
    1
  6105. Heā€™s really mad, letā€™s just let him cool off a little
    1
  6106. Sry bro, wasnā€™t me, I donā€™t delete comments. Free speech and allā€¦.who am I so censor people
    1
  6107. from snapon
    1
  6108. Not peter
    1
  6109. Never coach someone in front of others
    1
  6110. But then he cant learn
    1
  6111. Later
    1
  6112. You missed it, I finished the Subi
    1
  6113. Check the comment section of that video šŸ˜‰
    1
  6114. You won the comments section today
    1
  6115. Itā€™s a spare car that has been parked with leaks for a long while
    1
  6116. I donā€™t do drywall šŸ¤·ā€ā™‚ļø
    1
  6117. FelPro and the subaru community dont get along very well (That's my understanding)
    1
  6118. It doesnā€™t work that way
    1
  6119. Itā€™s a Snap on 3/8 drive. My red one is 1/4ā€ drive. Theyā€™re not cheap $$450 each-ish. Milwaukee does make good ones at half the price. Theyā€™re a bit bulkier though.
    1
  6120. Ā @rob.grangerĀ  šŸ˜‰I donā€™t have one. Actually , many viewers recently asked me if I had a Patreon account. I dunno how I feel about such things just yet.
    1
  6121. Red one is 1/4ā€ drive and my green one is 3/8ā€
    1
  6122. Well now I doā€¦Great
    1
  6123. Never tried. It mightā€¦. Maybe šŸ¤”
    1
  6124. Absolutely!
    1
  6125. Iā€™m old now, I donā€™t know another way šŸ¤£šŸ‘
    1
  6126. Eeewwwww
    1
  6127. Nooooo! Bc thereā€™s no way to get the shells out after
    1
  6128. It is kinda like a minion šŸ¤£šŸ¤£šŸ¤£
    1
  6129. Dirt on the funnel, dirt inside the funnel. Dirt on your hand that falls off into the oil bottle. Dirt in the oil bottle. Dirt floating in the air. Fibers from the rag or towel from where you wiped down the funnel, hands, oil bottle or even the filter that was spilled. All of these areas, invite the possibility, for contaminates, to enter the clean side of the filter.
    1
  6130. Dang those escorts require a specialist. No way works I ever touch that thing šŸ¤™šŸ˜‚šŸ¤£
    1
  6131. is ok I was just reaching, Didn't stick any vitals under there, including my noggin
    1
  6132. People overlook the most simple things. Iā€™m guilty of it myself. That may not be the actual problem, but it canā€™t be overlooked as a probable cause. I havenā€™t seen or heard of this van having a no crack issue yet. Itā€™s been over a week
    1
  6133. Asa matter of fact, I mention of them at the end of tomorrowā€™s video.
    1
  6134. I was good bro, even if the jack let down, I had space for my head and chest, I was just gaining easier access. But your right bro! Never trust your life to a single piece of equipment. Have a safety or a back up!
    1
  6135. The only thing worse than a PT cruiser, is a PT with a turbo šŸ¤£šŸ¤£šŸ¤£
    1
  6136. https://amzn.to/2XN4Ic6 I also put a link in the description.
    1
  6137. Ā @drrick8839Ā southmainauto Iā€™m sure šŸ˜Š
    1
  6138. Ā motorhead3817Ā I understand šŸ˜®
    1
  6139. The paper diagram tells me is someone plug connectors into the wrong socket?
    1
  6140. Twice the price, half the quality!!
    1
  6141. Iā€™m chillin at a wedding šŸŽ‰
    1
  6142. Your comment is boring
    1
  6143. šŸ¤£šŸ¤£šŸ¤£
    1
  6144. Nobodyā€™s going to get that compressor šŸ˜
    1
  6145. šŸ¤£šŸ¤£šŸ¤£
    1
  6146. Because I want inverters on my truck
    1
  6147. Because itā€™s $20,000
    1
  6148. I prolly did say it, right it was a 15 at first ig
    1
  6149. Gulf waters are hot this year I dunno. I always plan for one just in case.
    1
  6150. It didnā€™t work over time because it vibrates loose
    1
  6151. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  6152. Never said that, I burn 3-4 gal overnight running 7000w of inverters, the gas generator burns 2-4 gal. However, I have the 120gal of diesel onboard the truck and only 20 gal of gasoline in Jerry cans. Itā€™s easier to use the diesel fuel source than to have 20 jugs of gasoline laying around
    1
  6153. Schedule is flippy floppy
    1
  6154. I was busy
    1
  6155. Yea I keep a ford purge valve for EXACTLY this reason. I also have some Toyota control modules and some Lexus ignition coils
    1
  6156. There should have been a little button to fed you to the full length video. Maybe itā€™s broken
    1
  6157. Itā€™s a similar Reeeeeee, but for different reasonsšŸ˜ Reeeeeee!!!
    1
  6158. Too busy to update my playlist šŸ™ƒ
    1
  6159. You get what you pay for, and the eBay intakes are not the answer.
    1
  6160. That one took me back to a different time in life šŸ¤£šŸ¤£šŸ¤£
    1
  6161. I think thereā€™s one in the description
    1
  6162. The PCV valve is part of the valve cover so thereā€™s little change in function
    1
  6163. And thank you too!!
    1
  6164. Well itā€™s a 4x2 so it works šŸ¤·ā€ā™‚ļø
    1
  6165. Well I donā€™t like Politicians so weā€™re even
    1
  6166. Youā€™ve been trolledā€¦.šŸ¤Ŗ
    1
  6167. Just a littleā€¦I did get accused of scamming and taking advantage on this one
    1
  6168. Oh yes I did.šŸ˜œ check the pinned comment and ending scene
    1
  6169. Battery powered ratchet. Mine is a Snap on. Milwaukee makes good ones
    1
  6170. Noo wayyyy
    1
  6171. When playing Sherlock Holmes with a junkyard car, I canā€™t just spend hours tinkering away with things! My battery terminal service product comes as a kit with terminal pads and a really good cleaner and itā€™s got a cost. The end of the video shows why I didnā€™t go too deep with this truck!
    1
  6172. Ha! Gotcha!
    1
  6173. Iā€™m afraid youā€™re mistaken, please read some comments about the cap
    1
  6174. I get a little dyslexic with model names sometimes. šŸ˜‰
    1
  6175. šŸ‡ŗšŸ‡øšŸ˜
    1
  6176. I know, itā€™s ok. It didnā€™t that.
    1
  6177. Gotcha!
    1
  6178. i came back in later, I caught it...good eye
    1
  6179. Dudeā€¦the cap was stagedā€¦ look at the end scene
    1
  6180. I did indeed
    1
  6181. Pinned commentā€¦šŸ¤£šŸ¤£šŸ¤£
    1
  6182. Hehe gotchaā€¦check out the pinned comment šŸ¤£
    1
  6183. that someone was me!
    1
  6184. Negative! gotchaā€¦. Check at the end
    1
  6185. šŸ˜±
    1
  6186. Bout $1200
    1
  6187. Nopeā€¦gotcha. Check out the pinned comment and ending scene
    1
  6188. You have been trolledšŸ˜œ check the pinned comment
    1
  6189. I got it b4 it left
    1
  6190. šŸ¤¦ no I didnā€™t
    1
  6191. But did I?
    1
  6192. Thereā€™s a back story to that cap. I left it off in scene deliberately. I was trolling a troll. It didnā€™t age well. But it didnā€™t leave with the cap off.
    1
  6193. šŸ¤£šŸ‘
    1
  6194. Nope youā€™ve been set up. Check out the pinned comment and the ending scene šŸ¤£šŸ¤£
    1
  6195. No I didnā€™t. I left that there to troll you for commentsšŸ¤Ŗ
    1
  6196. I donā€™t like you either
    1
  6197. Canā€™t record everything my friend
    1
  6198. I did not.
    1
  6199. Merica
    1
  6200. Yea I did garden hose and compressed air did the trick
    1
  6201. I have to, Iā€™m told to operate everything to test it
    1
  6202. Then I would get oil in my mouth
    1
  6203. I know
    1
  6204. The inspectors which are state approved in very limited in numbers use subjective opinions to fail vehicles fleeing the customer for repair bills. As a former state safety inspector, I am well aware of the corruption. Plus the brackets you can buy for the stickers are made by high school students and then sold by the state.
    1
  6205. sure felt like it, but i had a negative test
    1
  6206. How do they slide out of theyā€™re rusted solid?
    1
  6207. Got ā€˜em both!
    1
  6208. Ā @michaelherbert8213Ā  šŸ¤™
    1
  6209. šŸ˜
    1
  6210. I didnā€™t put it there and I donā€™t own it so I cant move it. That big lift is part of my lease. I own the 3rd lift at the end. Maybe one day I can renovate the building and move things around.
    1
  6211. I thought they were so bad I had to paint, after a good wash Iā€™m reconsidering the paint
    1
  6212. Canā€™t win ā€˜em all
    1
  6213. Itā€™s in the works, itā€™s still parked in our lot. Iā€™m going to trailer it out soon and figure out what to do with it. Iā€™ve been thinking about fixing it as opposed to crushing
    1
  6214. Spot on!!
    1
  6215. Yea my guy had to cut his trip short, it was a semi-emergency
    1
  6216. No sir
    1
  6217. I used permatex grey or black RTV for most applications
    1
  6218. šŸœ ahhhhhhh oooohhh
    1
  6219. Iā€™ll do one when the opportunity presents itself!
    1
  6220. Those are for the engine cover
    1
  6221. Watch it buddy
    1
  6222. No need of it
    1
  6223. That one is for the engine cover, thereā€™s tow bolts in the back and two acorn nuts in the front
    1
  6224. Email us and we can get done!
    1
  6225. 99%of the time thatā€™s the case around here. But my customer hand an emerengcy and he traveled far to be here. So I had to finish earlier then we planned
    1
  6226. Take it back šŸ¤£šŸ¤£
    1
  6227. Ā @larryhoward4051Ā  Look into the Astro brand for lights. They charge wirelessly
    1
  6228. You bet! And thank YOU!! šŸ˜Š
    1
  6229. šŸ¤£šŸ¤£
    1
  6230. Just the OEMs fielding technology to implement self driving cars
    1
  6231. Itā€™s a sunex set
    1
  6232. I think it was the vent fan from the paint booth next door. I was working in the expanded area of my shop. The sounds are a little different
    1
  6233. It was a failed experiment, never did that again
    1
  6234. Sorry, that's an older video before I learned to edit properly
    1
  6235. I was
    1
  6236. Sry, this was an older one and I tried new thingsā€¦didnā€™t work out so well
    1
  6237. I havenā€™t put music over a video in months, this was like the only one
    1
  6238. That was a long time ago, I have learned to edit since then!
    1
  6239. You're on an OLD video, check out some newer content
    1
  6240. Because someone has to pay for that. Wasnā€™t my call šŸ¤·ā€ā™‚ļø
    1
  6241. What if the video IS my job?
    1
  6242. That sounds like some BS from here!
    1
  6243. I see your point. However, there is a burden of proof to consider.
    1
  6244. You sure about that?
    1
  6245. Start taking videosā€¦puts a stop to it real fast
    1
  6246. Face slap šŸ¤¦ā€ā™‚ļø
    1
  6247. Sounds like the refrigerant is low. Have the system recovered with an A/C machine. It will weigh the revered refrigerant and tell you how much was in there. If itā€™s empty thereā€™s defiantly a leak. If it only has half a or so, thereā€™s a small leak (like service valves). Based on that, the ship will determine the next step, such as replacing the valves and installing some UV dye and recharging the system. If they canā€™t find a leak, the dye will present itself later and will help locate any additional leaks! Good luck!
    1
  6248. gloves are ok, no dirt on the interior. I wipe them with towels and they're stained but do not transfer the nasty to the interior. I know better.....
    1
  6249. šŸ¤£šŸ¤£šŸ˜‚
    1
  6250. Weā€™re all here, because weā€™re not all there. I understand.
    1
  6251. I fixed it. Thanks! https://amzn.to/3Bje5ih
    1
  6252. I donā€™t think thatā€™s likely to cause the bearing to wear out. The age of the bearing and more importantly, the condition of the lube helped it die. The lug nut could have been a contributing factor but I wouldnā€™t bet the farm on it
    1
  6253. One day! šŸ˜‰
    1
  6254. Thx Colt šŸ˜‰
    1
  6255. He sold it to me šŸ¤£šŸ¤£šŸ¤£
    1
  6256. $8/qt
    1
  6257. You too!!
    1
  6258. Following ur logic. Many reviewers make it a point to mention that they have not been to my shop.
    1
  6259. The machine wonā€™t flow backwards, meaning it wonā€™t pump in spend fluid. It functions the same way regardless of how the hoses are connected.
    1
  6260. I donā€™t get it either šŸ™„
    1
  6261. YAY!
    1
  6262. Things happen. We all know this. Sometimes, this is how we learn. Mistakes are always worth it as long as a lesson or two is learned from it.
    1
  6263. Wasnā€™t my call. Customer and managers made that decision
    1
  6264. No this one is leftover from the dealership. I've been hanging on to this one for a week or so.
    1
  6265. What we see here is a product of a devolving industry. Alldata, shop key, ProDemand and special tools cost money. SOME places think they don't need these resources. We can even save a few bucks by handing jobs to inexperienced workers because they cost half the price of a guy like me. After all, the job only calls for 3.8 hours, so it can't be that hard... Right?....WRONG! This situation was 100% avoidable. But we ran into it at full speed too save $100 in labor cost.
    1
  6266. Yup that's the situation here.
    1
  6267. No he didn't. The guy was a trainee. Like I said, be never should have been given this job. Bosses knew it three whole time. Or worse they didn't consider his skill level.
    1
  6268. šŸ¤” It was replaced with the same engine. 2.5l 4 banger.
    1
  6269. At $7-9 for a 2x4 I think I'm in the wrong business
    1
  6270. Sometimes this is how we learn. If only the bosses were capable of learning or admitting their mistakes, the world could actually be a better place
    1
  6271. Ok driving trucks and forklifts over the rickety bridge is creepy. And it's full of ghosts.
    1
  6272. What's makes you say that? Because I didn't wear my seatbelt?
    1
  6273. I just work here....
    1
  6274. Ā @themfnnitrorooster7619Ā  I left after this thing was put back together. I can't work for people who make bad decisions repeatedly. There's more to the story than just this car. When it's time, it's time, there's a reason tool boxes have wheels on them.
    1
  6275. Yea I know. Like I said in the video, I was not happy that they gave them job to over if the younger guys. Bosses still didn't learn after he made the mistake. They gave him another timing cover right after this.
    1
  6276. The shop does.
    1
  6277. šŸ˜‚šŸ¤£ That's a little extreme, but I see your point!
    1
  6278. A lube can be very good at one thing or mediocre at many things. WD is used on many things. I haven't used WD 40 since I was a kid. I prefer PB blaster or BG Inforce. And I think the BG is better. I prefer permatex for brake parts lube and Mobil 1 engine oil.
    1
  6279. It's a 3/8 drive snap on. Had it for about 3 years and use it daily. It works hard. I'm surprised I haven't broken it yet.
    1
  6280. Iā€™ve come out of my shell since this videoā€¦itā€™s an older one. Check out some of my other videos, I make regular appearances! Thanks for watching!
    1
  6281. At first I got 200 ohms bc I didnā€™t read the directions to the fullest. I checked resistance between both pins in the connector. I was supposed to check each pin to ground, thus giving the 200 ohms total instead of 100 on each circuit.
    1
  6282. Theyā€™re aluminum
    1
  6283. Ā @robertweir9034Ā  I agree. Looked it up in Alldata. Even double checked before I commented. 20 N.m or 15 lb ft. Thats exactly why the first set failed
    1
  6284. Sure is 15ft lbs, thatā€™s what I torqued them to. I even said so while doing it
    1
  6285. Seth Anthony - Never gonna change šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  6286. Itā€™s very flammable. I donā€™t use it on sensors, alternators, exhaust unless the engine is cold. Itā€™s ok on rubber if necessary (debatable) Brand doesnā€™t really matter it all the same (debatable)
    1
  6287. He says fastener too?
    1
  6288. ā€¦and did an oil change of camera
    1
  6289. The fluids didnā€™t cross contaminate, another guy did the oil service
    1
  6290. Bc it only had 5 cylinders leftā€¦twas a joke
    1
  6291. Itā€™s all hypeā€¦ fuel economy is the foot šŸ¦¶
    1
  6292. You have to pay to play!!! And keeping the flame in the bowl it critical! Gale Banks pounds that fact over and over again, yet these tuners still ignore it.
    1
  6293. The EPA says they don't meet emissions standards, that's why our vehicles are twice the size of a Hilux. We need less government
    1
  6294. Breve one cylinder deleted itself thus making the engine a 5cyl. Play on words
    1
  6295. The truck was from Canada, so itā€™s Canadian. I meant no shade on Canada
    1
  6296. Too much injection timing, it was clear by the burn outside of the fuel bowl. Thats a major no no, theyā€™ll blow up every time with a tune like that.
    1
  6297. Done
    1
  6298. The whole building has a nice security system, I have access to it. And there are people here after hours šŸ‘
    1
  6299. Dark
    1
  6300. Thatā€™s a little out of lineā€¦just saying
    1
  6301. Vote Vote Vote !!!! Take the time no matter what!
    1
  6302. The crazies already found me months ago. Weā€™re a 2a state šŸ˜
    1
  6303. I just sawā€¦ šŸ„ŗ
    1
  6304. Rome wasnā€™t built in a day
    1
  6305. Negative canā€™t fit it on the front side
    1
  6306. Iā€™m practicing šŸ˜Š
    1
  6307. I didn't realize until the comments section told me. Turns out it came in wrong. I checked service info for the diagram
    1
  6308. Thank you!
    1
  6309. Its funny
    1
  6310. why?
    1
  6311. Nope
    1
  6312. Call banks and ask them (I think so)
    1
  6313. Theyā€™re really that tight
    1
  6314. Is ok...I got it
    1
  6315. Itā€™s still isnā€™t pretty tho, but it kinda works
    1
  6316. $30 to weld or $450 to replace the exhaustā€¦yea
    1
  6317. They blamed it on me, it was a huge fight and I never took responsibility for it. The conversation ended when I asked ā€œwho have them the alarm code?ā€
    1
  6318. Dave said hello!
    1
  6319. Shhhhh
    1
  6320. šŸ¤£āœŒļø
    1
  6321. Yup
    1
  6322. Yea! They pump out 100-200 gal at a time on a truck.
    1
  6323. Edit out for background sound perhaps. I did chop that scene up a little
    1
  6324. Ok thatā€™s crazy if they matched šŸ˜¬
    1
  6325. No I donā€™t always video torque wrenches
    1
  6326. Truth
    1
  6327. Iā€™m pretty sure it was an MKZ
    1
  6328. ā€œ 82 82 82ā€ watch the movie Rainman with Tom Cruise and Dustin Hoffman
    1
  6329. Ā @stevensunhing2618Ā  Rust is actually very minimal down here in Florida. Yup north it gets pretty serious
    1
  6330. It is. Parts have many names these days. One manufactures calls it one thing, another manufacture calls it another. Ex: Thermostat is a water valve
    1
  6331. Ok Iā€™m wrong šŸ˜‘
    1
  6332. Module fault, need a control module. I edited that out
    1
  6333. Mine are Snap on ratchets. I hear good things about the Milwaukee ratchets too. Iā€™m not sure if Milwaukee makes a long shank version
    1
  6334. Ā @DorsetSaferRoadsĀ  I agree with that too. Consider this, most ev owners, really take care of their ride. Nobody is parking their Tesla under oak trees or lining neighborhoods with them. Theyā€™re kept mint in garages. My point being is that EVs are in the luxury market now. When/if they make it mainstream like the 2030 plan and we see EVs as rentals, loaners, high school/college cars, and competitively ($$) available to the general consumer, this Gould change. Folks are looking at EVs for their benefits but we arenā€™t weighing the risks or taking steps to mitigate them. We shall see. šŸæ
    1
  6335. Only to be replaced with an entirely new set of problems with a workforce that is not familiar with the technologyā€¦. you guys think I have stock and brake clean companies meanwhile Iā€™m loading up on popcorn
    1
  6336. I fixed that too šŸ˜‰
    1
  6337. So am I! We need a 4 post! Itā€™s in the planning stages now!
    1
  6338. So what should I sell then? $3/qt garbage oil?
    1
  6339. Leave the D jokes to me šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  6340. Itā€™s not us! Itā€™s the new people
    1
  6341. Yes indeed. Visit RainmanRaysRepairs . Com for the link to the shops email/appointments
    1
  6342. We donā€™t engage in that activity here
    1
  6343. It would wake the building being ripped apart to knock the cars down
    1
  6344. šŸ«” Thank you!
    1
  6345. Yes they are
    1
  6346. Yellow freight had it
    1
  6347. Thereā€™s really no need to put sealant on a gasket. Itā€™s messy overkill. If sealant was required, than a gasket would not be required. So if a gasket is required, that suggest that no sealant is required. Thereā€™s always exceptions, but thatā€™s the rule in general
    1
  6348. I spent 4 hours trying to extract the broken bolt while it was in chassis. It wouldnā€™t budge. Gave up and ordered a 2.2 SOHC to swap it with. Pulled it out when the engine was on the way, then the engine disappeared and couldnā€™t locate a suitable replacement. Decided to try again to extract the bolt. Succeeded. Ordered the time sert kit. Itā€™s been a thorn in the side to say the least
    1
  6349. When theyā€™re not on the clock
    1
  6350. Late reply...thank you too!!!
    1
  6351. Weā€™re good šŸ‘
    1
  6352. Weā€™re good in central Fl. Thereā€™s a lot of flood water up north
    1
  6353. Itā€™s a damn shame šŸ˜ž
    1
  6354. Oh wowā€¦why did you leave? Glad youā€™re backā€¦ itā€™s been a wild ride so far. But weā€™re doing it!!
    1
  6355. I had the truck in a stand and only the axle was on the floor jack
    1
  6356. Airbags donā€™t solve the bent leafs and crushed bushings šŸ˜‰
    1
  6357. I care! šŸ«”
    1
  6358. A agree with the 180* also. I also recall some of the older duals on 1t trucks were pinned from the hub so you couldnā€™t do 180*, after working in those the habit stuck with me.
    1
  6359. Nawwwww itā€™s fine
    1
  6360. Iā€™m so sry
    1
  6361. Itā€™s a Nissan thing
    1
  6362. Canā€™t do that
    1
  6363. Because itā€™s a sideways filter
    1
  6364. Thereā€™s always exceptions šŸ˜‰
    1
  6365. All the time, believe it or not, when I say itā€™s probably not worth fixing (In my opinion) they fix the issue
    1
  6366. It happens
    1
  6367. šŸ˜³
    1
  6368. iMovie
    1
  6369. I fixed it, sry
    1
  6370. I fixed it,super sry
    1
  6371. It covered in waves. That just send to the way of things in automotive land
    1
  6372. Confused by your commentā€¦
    1
  6373. Fixed it really sorry
    1
  6374. I fixed it, so sorry
    1
  6375. I have to do my best to keep both worlds separate because we donā€™t want to attract trolls to the business. E Mail me and I can disclose my store info. Rainmanraysrepairs@gmail.com
    1
  6376. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ‘
    1
  6377. I have see that, which video was it? āœŒļø
    1
  6378. The curve is real Iā€™ve seen at at seal level AND at 46000 ft no fisheye
    1
  6379. Im going to pull the head off to find out!
    1
  6380. Keep good oil in it and donā€™t run it to 7000miles itā€™ll be fine
    1
  6381. We going to be at SEMA this year
    1
  6382. lol
    1
  6383. There was potential extended warranty regarding a cylinder head issue, then it blew up. The hole in the block is not part of the extended warranty.
    1
  6384. I spent a lot of time in my head trying to find out how I could have caused it.
    1
  6385. There was potential extended warranty on a cylinder head causing a misfire. Thatā€™s out of the window now with a hole in the block
    1
  6386. And thanks to you! šŸ„°
    1
  6387. Ā @willsrestorationsĀ  I understand what you said, but your statement, thereā€™s little relevance when compared against the facts. You see nearly two hundred thousand people a half long video without complaint. Analytics show that viewers on average watched 82% of the whole video. Your claim appears to be subjective and irrelevant however, upon review of every comment that youā€™ve ever made, it appears that you only seem to have negative things to say, and you simply come here to bang away at your keyboard.
    1
  6388. Sorry about your attention span
    1
  6389. Will cut it out before I have to ask you to leave
    1
  6390. Thanks for watching
    1
  6391. šŸ„¶
    1
  6392. šŸ¤£
    1
  6393. We were pushing budget already and it didnā€™t need the. The ball joints would have added 25% to the job
    1
  6394. Businesses must policies
    1
  6395. He took his Jeep with him. Perhaps one day I will get my own jeep to build
    1
  6396. Noooo wayyyy šŸ˜
    1
  6397. Got ā€˜em all šŸ˜‰
    1
  6398. Hahaha itā€™s a Hyundai transmission in a fiat badged jeep product
    1
  6399. Get the chains out!
    1
  6400. I think the monetary system is broken
    1
  6401. No I have an 07 for a reason šŸ˜‰
    1
  6402. But it looks better to the onlooker, same concept with manufacturing pollution. We just send it overseas where they have no emission controls or dumping laws, then they just pollute farther away so we don't notice. Then the jet stream carries it all across the pacific anyway and brings it right back to us.
    1
  6403. Nope
    1
  6404. GoPro died in the moment
    1
  6405. Mechanics donā€™t open packaging properly
    1
  6406. No they have stuff for gassers too
    1
  6407. Iā€™m waiting Eric to finish the van engine, it has to be shipped. The cobra needs to trade places with the Monte Carlo for Teardown
    1
  6408. Waiting in the engine
    1
  6409. Reeeeeeeeee!!!!
    1
  6410. never should have happened that way
    1
  6411. But did you see when it left the bench?
    1
  6412. This means WAR!!
    1
  6413. Negative
    1
  6414. Wow thank YOU Rob! ā˜ŗļø More brake clean šŸ˜‚
    1
  6415. Itā€™s much better but not quite right. I think at 230000 miles itā€™s compressor time. Low side pressure is favoring the high limit and the high side needle bounces
    1
  6416. Troy wasnā€™t feeling well. Aaron is my friend from Michigan. Check out his channel @Powerstroke Tech Talk W/Arod
    1
  6417. šŸ˜‚šŸ¤£
    1
  6418. The title literally states what happened to the car, did you even watch the video?
    1
  6419. I wasn't prepared for this question....
    1
  6420. Looks like a misspoke or miscalculated šŸ¤·ā€ā™‚ļø
    1
  6421. Thatā€™s how it goes
    1
  6422. Iā€™ve seen that video šŸ¤¦ā€ā™‚ļø
    1
  6423. šŸ˜
    1
  6424. I am. I know itā€™s taking a while but Iā€™m getting to it
    1
  6425. I have found that folks donā€™t mind spending big money on things as long as theyā€™re comfortable with the decision. The best way to make someone comfortable with the decision is to help them make a well-informed decision. For example I can check out a car that needs $4000 worth of work and I hand over an estimate with the laundry list of stuff with total $4000 the immediate response is going to be NO! But if I were to explain the situation clearly and illustrate why we need to spend $4000 itā€™s not a problem at all and the answers are unusually yes.
    1
  6426. Youā€™re going to have to install a resistor or youā€™re going to have to install DRLā€˜s with built-in resistors
    1
  6427. Heeeeeyyyyy!!
    1
  6428. Iā€™m in manatee/Srq. I donā€™t know how the trash can got here šŸ¤·ā€ā™‚ļø
    1
  6429. https://youtu.be/iU0YPA2YPzo (Itā€™s still unlisted)
    1
  6430. šŸ¤£šŸ¤£šŸ¤£
    1
  6431. Our buses are unreliable at best. Staff shortages. There was one day when we just didnā€™t have a bus. It never showed up šŸ¤·ā€ā™‚ļø
    1
  6432. šŸ¤£
    1
  6433. šŸ’Æā€¦ but itā€™s totally worth it!
    1
  6434. Customer didnā€™t supply them šŸ˜ˆ
    1
  6435. I use several parts places and itā€™s about the same across the board
    1
  6436. It was leaking UV dye from the shaft seal. The clutch worked fine but the charge would leak out.
    1
  6437. Ā @devinangola3458Ā  Personally and professionally, Iā€™d rather have the Denso part and avoid all this. Customer wanted to use this part so it was his choice. I donā€™t own the situation bc itā€™s not my decision. Customer knows my opinion and the aftermarket compressor was chosen. So as far as I have to be concerned, thereā€™s no problem. I did what was asked of me.
    1
  6438. Prolly nothing
    1
  6439. I didnā€™t want to overdue it šŸ˜‰
    1
  6440. It works for some, I just donā€™t do things like that.
    1
  6441. Turbos blow
    1
  6442. Sunday like it to me
    1
  6443. I prefer a more intelligent method to speakingā€¦or extreme sarcasm šŸ¤£
    1
  6444. All of them
    1
  6445. Tired that in last video
    1
  6446. Next week sometime, part is on order
    1
  6447. I hate those things, and the fly
    1
  6448. It is actually! Iā€™ve had it since I was a kid
    1
  6449. Kind of legal (ish)
    1
  6450. Fixing up some leaks this time
    1
  6451. The system was replaced last year and the parts carry a warranty
    1
  6452. Heā€™s still here. We just donā€™t do that anymore
    1
  6453. Yes, Clean oil on the seal is correct. (I did that) filling the filter is a no. By filling the filter youā€™re inviting contaminants to enter the clean side of the filter. In this particular case, the filter has to go in sideways, filling it is not an option because it would spill out.
    1
  6454. After 2008 they do, thanks EPA
    1
  6455. It goes in sideways, if I prefill it, then turn it sideways, ask all oil spills out
    1
  6456. šŸ˜ŠšŸ‘‹
    1
  6457. Tā€™was the fuel/water separator. The one in the back by the axle is the fuel particulate filter.
    1
  6458. Me too šŸ™ƒ Iā€™ll have to catch the next one
    1
  6459. Really?? Awesome!! I often record and forget to take it out of HDR ( Itā€™s my cameras default)
    1
  6460. Itā€™s the neighbors
    1
  6461. I will, Iā€™m making a website/system to schedule folks. Soon. Thereā€™s loads to do. We donā€™t even have phone/internet installed yet.
    1
  6462. Yes
    1
  6463. You know that voting positions/opinions shouldnā€™t be public information.
    1
  6464. Someone elseā€™s šŸ¤·ā€ā™‚ļø
    1
  6465. šŸ˜³ ohhh WFTā€¦.. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  6466. šŸ¤¦ā€ā™‚ļøoops
    1
  6467. Old axle nuts also work great
    1
  6468. Itā€™s badly torn and waiting proper disposal
    1
  6469. Picked it up! Sheā€™s waiting for proper disposal. šŸ«”
    1
  6470. Just like diesel oil
    1
  6471. Maybeā€¦ I aways try to go whenever I can, but never seem to make it
    1
  6472. Email me, Iā€™ll send em to you
    1
  6473. All in due time
    1
  6474. 5000s
    1
  6475. It's a gooseneck hitch ball. It flips over and and stick up in the middle of the bed. Then a gooseneck trailer can be hitched.
    1
  6476. I run between 20-30 minutes for the normal ones. On occasion I get a 40 minute one that I can't shorten
    1
  6477. Not by us
    1
  6478. šŸ˜µā€šŸ’«
    1
  6479. Plague?? šŸ˜³
    1
  6480. Ā @2491kridgeĀ  I dunno šŸ¤·ā€ā™‚ļø It wasnā€™t a thing that was applicable in this case so I didnā€™t think to mention it
    1
  6481. Yes I do
    1
  6482. I figured it was something along those lines bc of the exact voltage on the other connectors
    1
  6483. I didnā€™t need to prove it. It was replaced. And in the absence of command from Ecm there was no other possibility, with the exception of internal engine damageā€¦not the case here
    1
  6484. Especially with the glasses šŸ¤“
    1
  6485. Ā @jormalonnberg1578Ā  100%!!!!
    1
  6486. Ā @stevendegoniaĀ  lol not troy
    1
  6487. Ā @LycaerixĀ  LOL it was early:)
    1
  6488. I never knew šŸ¤·ā€ā™‚ļø
    1
  6489. I never noticed it šŸ’€
    1
  6490. šŸ’€šŸ’€šŸ’€
    1
  6491. I never noticed till the comments told me šŸ’€
    1
  6492. I he left. Thereā€™s a vid that says I quit in the thumbnail from about two weeks ago. We had a story time around the 30 minute mark
    1
  6493. Thank you
    1
  6494. Itā€™s been sitting for a year
    1
  6495. Worse I think
    1
  6496. The cheap diag products have been known to cause DTCS, not a myth, but also not a general rule
    1
  6497. You can set the auto dim based on ambient lighting, but they donā€™t dim with the dimmer knobs, I wish they did tho
    1
  6498. Nice!! Itā€™s a beauty!
    1
  6499. Thx JAMES!
    1
  6500. The iDash will work on any OBDII vehicle, mounting them can be the challenge but there are suction cup mounts
    1
  6501. Lol me too! I hated the concept of wire controlled throttle back in the day. A TBI or carb still has the fastest throttle response tho, the cable will always reign supreme! šŸ¤£
    1
  6502. As a former dealer tech, we hate aftermarket products. We like to use them as a scapegoat, so itā€™s best to remove before service. An no the PM doesnā€™t void warranty
    1
  6503. No bc theyā€™ll scratch the mount again when I go to put them back
    1
  6504. It was being burned in the cylinder, no milkshake Oil on this one
    1
  6505. Okā€¦ Iā€™m using that one šŸ¤£
    1
  6506. Iā€™ll smart enough to realize that I learn something new every day. Therefore I donā€™t know shyt.
    1
  6507. Turns out there is casting flaw in the engine block on the 1.6l The issue was resolved at some point with a redesign. Do some research and see if yours build before the redesign. Ford has been replacing engines in these. Contact ford or the dealer. If itā€™s not consuming coolant, I donā€™t think they will take action. Honda makes a nice mini suv šŸ˜‰
    1
  6508. Itā€™s reusable of the result is negative, but if it turns yellow, the solution must be discarded
    1
  6509. Not yet but thatā€™s a great idea! Iā€™m constantly trying new things for the channel!
    1
  6510. I think that noise you heard must have been something else in the background. Perhaps moving parts in the trans. I was listening to the bearings with a stethoscope and the camera couldnā€™t have heard what the scope did. I didnā€™t really hear anything with the scope either. Thatā€™s the trouble with wheel bearings, sometimes they can only be heard while under a load. Like when driving. That was the case in this situation. I replaced the LF based on what I heard, combined with what the customer described and what they heard.
    1
  6511. Hello Deutschland
    1
  6512. They tear the grease boots
    1
  6513. Thatā€™s the tone ring for the ABS/wheel speed sensor. As it passes by the sensor, the sensor magnetically ā€œcountsā€ the teeth and the speed of the wheel can be calculated by the ABS module. Great question!
    1
  6514. Because plastic parts breaking and high repair costs will encourage the consumer to buy another car, with a loan, to stay in debt, bc we are debt slaves designed to feed the system.
    1
  6515. From Wife Units Point of View! Reverse Burnout! RUiNinG MY Grass!! With @RainmanRaysRepairs https://youtu.be/UPL01RokNjk
    1
  6516. The one that can be seen was empty
    1
  6517. I think itā€™s an oil leak. The condition is intermittent. I nearly killed the batteries trying to start it yesterday And it ended up needing a shot of either. This morning, and all day today it fires up right away
    1
  6518. šŸ¤£šŸ¤£šŸ¤£
    1
  6519. For some reason that really bothers me so I donā€™t do it. Itā€™s a viable option though.
    1
  6520. This is the kind of job to push ya over the edge
    1
  6521. Nope Iā€™m over 90-100% productive consistently. Productivity is measured in labor hours produced versus hours on the clock
    1
  6522. I make fun of everyone, not just dodge people
    1
  6523. Good for the engine, Kinda illegal
    1
  6524. Coming
    1
  6525. No need to flex
    1
  6526. They do
    1
  6527. Story of my life
    1
  6528. Itā€™s an 07, back before GM became traitors to humanity
    1
  6529. Ordered it, I realized after the contents that I forgot šŸ˜³
    1
  6530. Seriously YT stuck an ad in at 0:24??? I sry
    1
  6531. C'mon its only PG-13
    1
  6532. Glad to help, pouring fuel shouldn't be so difficult (by design)
    1
  6533. Iā€™m an LBZ very similar designā€¦no injectors under the VCs
    1
  6534. Itā€™s on a flex mount
    1
  6535. Its crazy, my LBZ duramax has 230k on the original injectors, theyre still going strong, balance rates are a little off, but it's not a huge issue yet
    1
  6536. No itā€™s just my playlist order šŸ¤£ no sponsor
    1
  6537. It was a long thought out purchase šŸ˜‰
    1
  6538. Time to move on to bigger and better things
    1
  6539. šŸ˜
    1
  6540. Not even close, itā€™s just a trailer
    1
  6541. Glad youā€™re here!
    1
  6542. Not evenā€¦I think the bosses found out that I was looking for a lease.
    1
  6543. šŸ¤£šŸ¤£šŸ¤£
    1
  6544. šŸ’Æ
    1
  6545. Thanks!
    1
  6546. šŸ«” Iā€™ll use clean towels, no tapeā€¦deal?
    1
  6547. Ahhh yes RVs!!
    1
  6548. šŸ‘ŽšŸ‘ŽšŸ‘ŽšŸ‘Ž
    1
  6549. Challenge accepted
    1
  6550. šŸ¤£šŸ¤£ not for sale!
    1
  6551. I did not
    1
  6552. Thatā€™s serious power
    1
  6553. Ā @nhzxboiĀ  Well the concept and setup isnā€™t for everyone. I live in a remote area and often use power in locations far away from an outlet. For me, it serves more purpose than just a partial home backup supply. This also how boats and RVs get 120v power in board if theyā€™re not connected to shore power. So the application has a wide array of uses
    1
  6554. I'll find out after I build new cables for the alternators and batteries.
    1
  6555. yessss
    1
  6556. A stick in the field could poke a hole right through a filter
    1
  6557. That groove was pretty deep and that sealant was embedded in there, scraping it out wasnā€™t working. I figured a mini router bit on a Dremel would do it
    1
  6558. That's because you are awesome
    1
  6559. I do that in another videošŸ˜†
    1
  6560. I threw a lot of information at him today, he'll catch on!
    1
  6561. Later, we just started
    1
  6562. 10-4 thx brother!
    1
  6563. Woa too much! šŸ«‚ TY!
    1
  6564. I guess you missed the part what the plastic piece was damaged from the collision
    1
  6565. Any body of water can hold a gator. You really never know because they move around. Fun fact, gators can also climb over fences.
    1
  6566. Nope, only chains & binders, bungee cords and twine
    1
  6567. Iā€™ll hold out as long as possible for another machineā€¦ 1234yf is stupid expensive
    1
  6568. I care!
    1
  6569. I may have been late editing this one
    1
  6570. Florida
    1
  6571. Just cleaning it out
    1
  6572. Just cleaning it out. Itā€™s a little lived in. (No food)
    1
  6573. Yeaaaa!
    1
  6574. Noooo thereā€™s 20 different ones
    1
  6575. Only took 4 to remove the tank
    1
  6576. I want to say it so bad!!!! But I dont want to steal his catch phrase
    1
  6577. If they leave us alone
    1
  6578. You didnā€™t wait till the end šŸ¤£šŸ¤£šŸ¤£
    1
  6579. I think itā€™s another algorithm change. Check the bell icon again.
    1
  6580. I can tweet about that laterā€¦ Get it? Hahahaha
    1
  6581. Always turn it off and then back on
    1
  6582. Iā€™ll put a probe in there!
    1
  6583. Now Iā€™ll paint it Red šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  6584. Ā @bryanalbright3019Ā  gotcha!šŸ‘šŸ‘
    1
  6585. Well we didn't have the screws so its of no matter
    1
  6586. šŸ¤£
    1
  6587. Ā @kilouno1963Ā  šŸ‘ I have a better camera now. Thatā€™s an older video āœŒļøšŸ˜Ž
    1
  6588. I donā€™t think I can do that either. Why so angry sounding?
    1
  6589. I do. That electric rachet doesn't really impact tho. So reg sockets are ok. Not to say I've never thrown a chrome socket on a impact gun before
    1
  6590. I couldn't find it
    1
  6591. Yea these things are fancy now. They're fluid filled for superior vibration absorbtion.
    1
  6592. Bro I've had this one for about 16 years.
    1
  6593. I don't know how you do it!
    1
  6594. Made in Juarez Mexico. American quality
    1
  6595. I prefer electric tape. šŸ¤£
    1
  6596. Lmao... Because it was a crimp type. Was a young guy... Lots to learn
    1
  6597. Hey thanks for the SUB. Hope you enjoy the content. https://youtu.be/YRyKzFVGxu8 Check this one out it's my favorite so far. Thanks for watching.
    1
  6598. "Tighten the bolts" Not breaking out the torque wrench for this
    1
  6599. I'm at a GM dealer...I get lots of em. Some are warranty jobs some not so much.
    1
  6600. No can do. Warranty. If it's not broke, can't fix it.
    1
  6601. It a wire connector for the crankshaft sensor. The brown is the pass through for the wire. The foil looking part is heat shielding
    1
  6602. Ā @RekuzanĀ  soon šŸ˜‚šŸ˜‚šŸ˜‚
    1
  6603. Will DO! It' be the few times ill use the clear
    1
  6604. Ā @KevinLooney-v6yĀ  I wasnā€™t using a Torx bit, I prolly said torx tho
    1
  6605. It was the proper tool, they were just so tight that they began to strip to had to hammer em in deep
    1
  6606. Theyā€™re outside, I donā€™t let them run in the building (they do it anyway and I have to Dad them)
    1
  6607. Ā @rjm7168Ā pt 2 later
    1
  6608. Hahaha itā€™s been like a year hasnā€™t it? Iā€™m thinking of just sending to ā€œI Do Carsā€ and letting Eric tear it down . Lol I wish we had more hours in the day
    1
  6609. Pulling the tiles off the floor and walls
    1
  6610. Awww arenā€™t you sweet? Thanks for watching!
    1
  6611. Thx I fixed it..oops šŸ¤£
    1
  6612. šŸ¤£šŸ¤£
    1
  6613. I found this one on amazon https://amzn.to/3DePQnb
    1
  6614. I modified these with a dremel to allow for the lip. I do have some digital calipers but I like these ones. I donā€™t want to forget how to read an indicator so I use them most of the time
    1
  6615. Mine is a blue point/ snap one. Heres a similar one on Amazon. https://amzn.to/3DePQnb
    1
  6616. Awww cmon itā€™s a cool little roller skate
    1
  6617. Thx !
    1
  6618. Old spice
    1
  6619. My voice will make you fall asleep šŸ˜“
    1
  6620. Ā @JimmyMakingitworkĀ  makes sense
    1
  6621. šŸ¤·ā€ā™‚ļø
    1
  6622. Iā€™m not going to do it lol. I know a new home contractor, Iā€™ll get him to handle it
    1
  6623. I heard from friends who are down south. They got it really bad šŸ˜¢
    1
  6624. They found me weeks ago
    1
  6625. The news was really upsetting me. THIS IS NOT A POLITICAL ISSUE! Shame on them!!!
    1
  6626. Itā€™s bad down south.. really bad. But weā€™ll be ok. Rebuild time is next.
    1
  6627. itā€™s a Dji mini2 good starter drone
    1
  6628. Itā€™s an 8500 watt. We do have a transfer switch and I use it when we need the generator. Buuut. I didnā€™t want to run it to conserve gasoline. I have 120 gal of diesel and only 30 gal gasoline. Just trying to conserve resources. Fortunately weā€™re getting back to normal. Power is back on today in my area
    1
  6629. They found me weeks ago
    1
  6630. Itā€™s and old junker that may never float again. Not even mine šŸ¤£
    1
  6631. šŸ¤£šŸ‡¦šŸ‡ŗšŸ‡ŗšŸ‡ø
    1
  6632. šŸ˜„šŸ˜„
    1
  6633. I didnā€™t care for it either
    1
  6634. Rome wasnā€™t built in a day
    1
  6635. AMI Longboat key Bradenton And Srq had less damage. No surge on the islands. North port and Naples also took nasty hits. Thereā€™s lots of flooding inland from levees breaking
    1
  6636. They're not
    1
  6637. No flooding here, Sarasota got it pretty bad
    1
  6638. The bearings aren't available as a replacement. I'm sure they're out there but not in my supply chain.
    1
  6639. My bad
    1
  6640. heeeey
    1
  6641. Arod doesn't like his voice over cameo on that scene, so I cut it out. He says he sounds like an idiot.
    1
  6642. The pulley was causing the belt to twist, I don't it was the belt length bc the old belt didn't bottom out the tensioner
    1
  6643. We're installing it now
    1
  6644. Youā€™re prolly good at 8k confusing a quality full syn
    1
  6645. Bc I donā€™t install fake eBay parts
    1
  6646. 10-4
    1
  6647. Older than I am
    1
  6648. Canā€™t please everyone šŸ¤·ā€ā™‚ļø
    1
  6649. Spilled spitting is gross
    1
  6650. šŸ¤£šŸ¤£
    1
  6651. Not exactlyā€¦see pt 1
    1
  6652. šŸ˜
    1
  6653. No Bo NO!!! šŸ¤£šŸ¤£šŸ¤£
    1
  6654. I dunno some would argue Never to say GO because Forward should be used. Therefore Woa is an indicator to alert. I totally see ur point tho. šŸ’Æ
    1
  6655. You should see us fight šŸ¤£
    1
  6656. I thought the x files thing was funny. (It fits her behavior) The boy has healed up well! Heā€™s back to normal!
    1
  6657. Itā€™s collision repair
    1
  6658. Dude, just having some fun. We need to park the cancel culture. I donā€™t see why everyone is so mad at nascar
    1
  6659. I think bc I was using a ball joint press to service them, that it made my brain relate them to ball joints.
    1
  6660. You sure are 100% correct
    1
  6661. You donā€™t like nascar? Just having some fun šŸ¤™šŸ˜‰
    1
  6662. It actually wonā€™t work. The hole is ā€œsteppedā€ and there are two different diameters on the i beam. Did you notice how the bushing fit in easily till the last bit?
    1
  6663. You donā€™t like nascar?
    1
  6664. See you get it! Folks forget, weā€™re all the same team at the end of the day! šŸ˜‰šŸ¤™šŸ‡ŗšŸ‡ø
    1
  6665. You donā€™t like nascar?
    1
  6666. You donā€™t like nascar?
    1
  6667. Morocco! Wow! šŸ‘‹šŸ‘‹šŸ‘‹
    1
  6668. Ā @igazmondo2542Ā  post again, maybe itā€™s in YouTube review. Donā€™t use all caps or a bunch of emojis. The algorithm will flag as spam.
    1
  6669. Ā @deathlisĀ  oohhh the list goes on and on SMH
    1
  6670. Link in video description, or click the banner below the video that has the t shirts and mugs hats etc
    1
  6671. I wiggled it till it worked again. It has bad contacts in the switch
    1
  6672. The interest rates for those repair programs are INSANE!
    1
  6673. YOU should watch the video before comment something stupid
    1
  6674. Diesel rates around here are at $220 now
    1
  6675. Now THATs saying something!
    1
  6676. šŸ‘‹
    1
  6677. Both declined šŸ˜ž
    1
  6678. Wife Unit Lauren, check out her channel @Wife Unit
    1
  6679. No I let it go at no charge, I think they were strapped for cash
    1
  6680. Welcome!!
    1
  6681. Inflated copper $$ and half the quality...the 2020's
    1
  6682. nope
    1
  6683. I'll rebuild an 86 Jeep CJ instead, check out the jeep video from earlier this week...wife unit wasnt too happy about it lol
    1
  6684. Book calls for .8hr on that one, I would have charged you $108 šŸ˜
    1
  6685. depends if one were to pay them off
    1
  6686. Lol... I had a nater on my 89 S-10 blazer fail back in high school, It made a supercharger sound so I left it there till it stopped charging
    1
  6687. Itā€™s ok
    1
  6688. When it happens you feel like youā€™re about to die
    1
  6689. Canā€™t say Iā€™m short in content. Just thought it was a cool opportunity
    1
  6690. šŸ¤£
    1
  6691. Huh?
    1
  6692. Iā€™m no wire welder by any means
    1
  6693. How can they be tinned if mechanically connected? Thatā€™s the only reason I do it like that, I figure tinning them gives a better solder connection
    1
  6694. I need a boat šŸ¤£šŸ¤£
    1
  6695. šŸ˜‚šŸ˜‚
    1
  6696. The cooler is working out! Even when itā€™s humid, itā€™s just enough to take the edge off
    1
  6697. I wish!
    1
  6698. They still go pew. Always save the best for last
    1
  6699. Itā€™ll blow your lungs out šŸ¤£šŸ¤£šŸ¤£
    1
  6700. šŸ˜³
    1
  6701. I never participated in the TP problem. Why is that? I normally keep plenty in stock. I was so glad to sit that one out
    1
  6702. I hope so!, I cant see it yet
    1
  6703. Who won? šŸ˜
    1
  6704. That seems to be the next logical move. PLUS I can add better insulation to the firewall.
    1
  6705. It was to the right of me when I said that LOL
    1
  6706. and the evaporator
    1
  6707. dont say it
    1
  6708. I dunno what he was up to, and with all of the audible frustration going on, I didnā€™t want to know šŸ¤£
    1
  6709. Itā€™s just going to enable our disable the air horn
    1
  6710. Ā @daveunbrandedĀ  None taken šŸ˜‰
    1
  6711. It for offest, not bolt pattern. The wheels don't fit the car without the spacers.
    1
  6712. Ā @Nick9drsĀ  not really, it dries out and hardens causing the pins to stick
    1
  6713. The packet is for the slide pins
    1
  6714. Iā€™ll adjust setting, thx!!
    1
  6715. Thatā€™s a Google /youtube thing šŸ¤·ā€ā™‚ļø I got tired of it and paid for YouTube Premium so no more ads for me
    1
  6716. Itā€™s more bigger
    1
  6717. Eric is finishing the engine. As soon as itā€™s in transit Iā€™ll pull out the blown up one and swap em out. These things take some time
    1
  6718. Hehe I have a 300a alternator and a 140a on this truck šŸ˜ (but you are correct)
    1
  6719. Winge?
    1
  6720. Thatā€™s exactly what happenedā€¦the irony didnā€™t go unnoticed. It was user error, I left a connector loose after a battery changeā€¦(learning curve)
    1
  6721. What was the cause of the original dislike, if I may ask
    1
  6722. Itā€™s probably just ignorance not necessarily lies šŸ¤·ā€ā™‚ļø
    1
  6723. šŸ¤£
    1
  6724. I can do that, I was Michigan man once šŸ˜‰
    1
  6725. šŸ¤£šŸ¤£
    1
  6726. Enough to make them with the expense!
    1
  6727. No wayyyy, not paying double for delivery. Iā€™m married šŸ˜‰ sheā€™s a great gofer
    1
  6728. next time
    1
  6729. I really didnā€™t pay much mind to the other fuse, I just happened to find it after seeking the AC fuse. It was probably for an cigarette lighter 12v plug
    1
  6730. You need airflow over the condenser 58Ā° when itā€™s over 90 outside with a vehicle indoors with the hood open is acceptable
    1
  6731. Thatā€™s pretty nice, he did a wayyyy better job at getting that filter apart šŸ˜šŸ¤£šŸ¤£
    1
  6732. Yup Sure can. Do you have a specific filter in mind? Iā€™m great thinking Fram, mobil1 Stp, carquest and Napa brand so far
    1
  6733. šŸ¤·ā€ā™‚ļø
    1
  6734. Yes but the ECM has a known failure at two places. The ground for the CEL (remember the fluttering) and the confirmed dirty ground at the relay. Logic being that since the ECM is just a big ground box , and the rest of the engine, particularly the fuel injectors are ground actuated, it stands to reason that those grounds are ā€œdirtyā€ as well causing the poor running condition. And if Iā€™m wrong RELOAD the CANNON! šŸ¤£šŸ¤£
    1
  6735. He wonā€™t listen
    1
  6736. Much ā¤ļø
    1
  6737. Watch it pal
    1
  6738. Weā€™ve been running fansā€¦ several of them, itā€™s making a lot of noise right now. I think itā€™s giving the mic a bad rep. Iā€™ll try no mic on fan days and Iā€™ll use it more on the non fan days
    1
  6739. šŸ¤£šŸ¤£šŸ¤£
    1
  6740. It was a really cool ibis, sometimes the Sandhill cranes come around too, theyā€™re about 3ft tall
    1
  6741. And youā€™re always right too, I need to pay attention šŸ˜‰
    1
  6742. Ray is back Ray is back Ray is back šŸ¤£
    1
  6743. Because I turned it off
    1
  6744. šŸ¤£ I know thatā€™s not a joke. Iā€™m laughing AT not WITH
    1
  6745. Didn't know you saw what was on the bill
    1
  6746. Negative, the blue gasket that I had didn't go to this style of thermostat. It had an O ring type that fit inside of the housing and around the edge of the thermostat.
    1
  6747. I think it actually flew into the trash can. I never found it.
    1
  6748. I really never found it.. it may have actually flew into the trash can.
    1
  6749. lol it didnā€™t go thereā€¦wasnā€™t required for this particular housingā€¦. Itā€™s a Chrysler thing
    1
  6750. I actually think it landed in a trash can. I looked everywhere for the thing and it couldnā€™t be found. I know for certain that itā€™s not in the engine compartment, it flew up and away.
    1
  6751. Itā€™s the universal solvent
    1
  6752. This guy didnā€™t even want to pay for coolant, there was no was he was going to buy a new cap
    1
  6753. Thatā€™s not very nice Larry
    1
  6754. AvE is my guy!!! Truly an inspiration to us all
    1
  6755. Very professional, the programmer said so šŸ¤£šŸ¤£
    1
  6756. They we have a gunfight I guess šŸ¤·ā€ā™‚ļø
    1
  6757. Maybe both šŸ˜ˆ
    1
  6758. Ā @ronald8792Ā  Not really, truck is a dually itā€™s 8ft wide. Roads are 10 ft at the lines
    1
  6759. I was in my lane
    1
  6760. Iā€™m good at that šŸ˜ˆ
    1
  6761. The term is a Ken not male Karen šŸ™„
    1
  6762. šŸ˜˜
    1
  6763. šŸ˜¢ so sorry that happened to your friends and to the families
    1
  6764. Nope
    1
  6765. I know he wouldnā€™t accept this. It makes the engine car community look bad!
    1
  6766. He slowed down in traffic and I cut the video to skip to the relevant parts
    1
  6767. Watch it again
    1
  6768. Yes but Iā€™ve called it DeSoto for so long hard to break the habit
    1
  6769. And thatā€™s my problem, recklessness kills families . Itā€™s just as bad or potential worse than a drunk
    1
  6770. The minivan full of kids that he kills, thatā€™s who cares
    1
  6771. What if the van panicked and didnā€™t move over? Thatā€™s a head in collision. He didnā€™t have it
    1
  6772. Yup
    1
  6773. I wonā€™t doxx him, but Iā€™ll let the law know. And Iā€™ll have a chat with his mom šŸ¤£šŸ¤£
    1
  6774. Good point!
    1
  6775. Iā€™m more worried about the jack hole causing someone else injury or death. Like the guy in the van with kids at home.
    1
  6776. Prove it
    1
  6777. It was stupid close
    1
  6778. ok I'll bite...Why will it fail?
    1
  6779. And a big thank you as well ā¤ļø
    1
  6780. šŸ¤£šŸ¤£šŸ¤£
    1
  6781. Everyone gets one ReeeeeEEEEE!! šŸ¤£
    1
  6782. Mine now
    1
  6783. Huh???šŸ¤”
    1
  6784. And thanks to you!!!!
    1
  6785. So sad šŸ˜ž
    1
  6786. I misspoke 5w20ā€¦it takes 5w30
    1
  6787. Toyota runs 0w16 now! šŸ˜³
    1
  6788. More filter area
    1
  6789. It turned off after a couple of drive cycles. Aaaaaand, it turned on again about 15 minutes ago (Iā€™m in the truck as I type this)
    1
  6790. Weā€™re thinking about Fridays
    1
  6791. Theyā€™re going to need need a warrant
    1
  6792. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£ thatā€™s a good one
    1
  6793. All Iā€™m saying is that I heard him say it
    1
  6794. The tag states fluid type not the ring gear diameter
    1
  6795. It states the fluid type in this one not the ratio
    1
  6796. See other comments about multiple camera placed ā€¦. Sry šŸ¤·ā€ā™‚ļø
    1
  6797. https://youtube.com/@arduinoversusevil2025?si=CBfC7DhIluBQ25uF
    1
  6798. We like him about as much as we like Castro
    1
  6799. JT actually did say that, I watched him say it.
    1
  6800. He gave it to me
    1
  6801. I have always bought my own brake cleaner
    1
  6802. Perhapsā€¦.but it was accurate none the less. Letā€™s call it a play on words šŸ˜‰
    1
  6803. šŸ¤£šŸ¤£
    1
  6804. šŸ¤£šŸ¤£šŸ¤£
    1
  6805. No weā€™re good šŸ˜Š
    1
  6806. By definition the title was quite accurate šŸ˜‰
    1
  6807. It has filters
    1
  6808. Not applicable, the oil cleaner can doesnā€™t affect the top of the piston, looking again after the oil service would have been a waste of time. There are different products designed for top cylinder cleaning which are added to the fuel.
    1
  6809. Combustion chamber, through the rings past the pistons, into the crankcase, up through the oil drain holes in the cylinder head and into the valve cover, through the pvc and into the intake.
    1
  6810. Those eye walls were crazy, the back side just didnā€™t stop
    1
  6811. Nope
    1
  6812. šŸ¤£šŸ¤£šŸ¤£šŸ«”
    1
  6813. I got one once that they didnā€™t even pressure wash, they painted right over the dirt chunks
    1
  6814. Yesterday
    1
  6815. Itā€™s like vlog not an instructional video
    1
  6816. The blower couldnā€™t pull air to blow to the vents
    1
  6817. Indeed, Iā€™m not thrilled with this combo, the setup is pushing it too far. Iā€™ll need a low deck gooseneck trailer.
    1
  6818. But thatā€™s the beauty of free speech isnā€™t it? We can say things that people may not like and no government has the authority to censor it. Thats precisely how ideas spread and grow. Truth and criticism hurt, and both are necessary.
    1
  6819. Ā @purgold1373Ā  Itā€™s already done ā˜‘ļø
    1
  6820. Jazzercise and 4-5-6!!!
    1
  6821. I moved it and filled it with DURAMAX parts waiting for me to take the cab off
    1
  6822. Ya but I always say odometer
    1
  6823. Ohhhh yea šŸ¤£šŸ¤£šŸ¤£
    1
  6824. Indeed, I realize whatā€™s wrong, I still have the machine and will adjust the level.
    1
  6825. Itā€™s not mine, comments saved the day on the drive oil level. I still have the machine, Iā€™ll pull the plug and set the correct level this weekend. Btw It is for sale, Iā€™m considering buying it, the owner moved and needs to get the payments taken over.
    1
  6826. Yup BluePoint is still Snap On but usually made in Taiwan (I think)
    1
  6827. Sheā€™s a goof šŸ˜Š
    1
  6828. I shot this one before the ram left, and we we did a brake job on it after the axle job.
    1
  6829. The brakes were super overheated, the fluid was cooked and I wasnt about to cheap out over a $40 hose
    1
  6830. It wore down till it fell out
    1
  6831. Canā€™t put the kids faces online. The world is a sick place in the deep corners of the inter-websā€¦keep your kids off social media. The pedos know how to use photoshop
    1
  6832. Itā€™s BG in-force
    1
  6833. Bingo!!
    1
  6834. Apocalypto
    1
  6835. https://amzn.to/3l1FI8S
    1
  6836. Super awesome
    1
  6837. Could be
    1
  6838. Yup
    1
  6839. Hey I get 15 mpg, itā€™s not THAT bad šŸ‘šŸ˜‚
    1
  6840. Nooooo!
    1
  6841. Is very real and annoying. Peaches taste like sewage to me.
    1
  6842. Ā @toddrees1Ā  These things can get out of control, like the government likes it. Thatā€™s how they get us, itā€™s divide and conquer. If weā€™re arguing with each other, weā€™re not paying attention to them.
    1
  6843. Chi-NAh šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ‘
    1
  6844. Urgh I canā€™t even think about šŸŗ right now
    1
  6845. william santos OMG, half of the country are Nazis?!? OMG how did this happen!?! Are you serious, all Trump supports are Nazis, woaaaaaa we are so screwed! Whaaaaatt are we going to do?
    1
  6846. The cylinder portion never ran dry so no air went in. No bleeding needed
    1
  6847. It was on a lift, that was resting on the locks. The floor jack was an extra safety measure
    1
  6848. I do
    1
  6849. Exactly
    1
  6850. Gearwrench . Com
    1
  6851. Theyā€™re with it
    1
  6852. Ā @bryantoth5249Ā  šŸ¤£šŸ¤£šŸ¤£šŸ¤£ Leave the jokes to me around here
    1
  6853. Itā€™s not a very good video if I donā€™t say anything Dr. Freud šŸ¤£
    1
  6854. Not intentionally šŸ˜
    1
  6855. šŸ‘€ Do You See!!! šŸ¤£šŸ¤£
    1
  6856. I like the hard way of doing thingsā€¦makes life a constant challenge. Like playing video games on expert mode šŸ¤£šŸ¤£
    1
  6857. Iā€™ve had great results with GoPro. I mentioned that it was overheating but I donā€™t fault GoPro for that. Itā€™s HOT in my shop and under a hood thereā€™s very little airflow. The GP 10 and 11 have been great cameras and are easy to use.
    1
  6858. Thanks and welcome
    1
  6859. Ā @GregoryCaine-qj6mhĀ  Heyy no worries, always storm prepped. Brick house and a metal roof!
    1
  6860. Conditions are favorable for some around this year, the gulf water temp is higher than normal
    1
  6861. I worked on this car yesterday
    1
  6862. 0.04% you say? Hmmmm šŸ¤” Does Greta Tornberg know this?
    1
  6863. Email me plz. Go to Rainmanraysrepairs .com
    1
  6864. Thatā€™s flippin funny šŸ¤£šŸ¤£šŸ¤£
    1
  6865. Sure can. I learned to drive on a ford ranger manual with a burnt out starter. We had to park on hills and pop the clutch to get it going
    1
  6866. Seriously thatā€™s fine. Thereā€™s a ā€œclean side and dirty sideā€ of the oil system. The clean, post filter side is where all the bearing surfaces and critical parts are, after oil goes through that, itā€™s no longer pressurized bc of tolerances between components, then it just drains back to the pan where the cycle begins again. After the oil protects the bearing surfaces itā€™s on the ā€œdirty sideā€ as itā€™s no longer lubricating something important, so itā€™s job is to now carry any dirt or debris to the filter for collection. So nano particles of airborne dirt floating into the oil cap isnā€™t a problem šŸ˜‰
    1
  6867. I swear I saw tire size and no pressure šŸ¤·ā€ā™‚ļø
    1
  6868. šŸ˜
    1
  6869. Negative, I do not commit traffic violations in view of the law
    1
  6870. Thereā€™s Lauren and I, Dave and we have have a part timer named Jesus (in EspaƱol) Arod from Powerstroke Tech Talk on YT, comes down from Detroit every few weeks to use the shop but heā€™s doesnā€™t work here.
    1
  6871. Weā€™ll do that later
    1
  6872. I do drain an fills (3-4x)on the super high mileage ones. Toyota WS
    1
  6873. Lol did I? I need to rewatchā€¦slippinā€™
    1
  6874. You must not have watch that part
    1
  6875. Close
    1
  6876. Parking brake is the drum section, that its only function
    1
  6877. Itā€™s called a flap wheel, game changer tool
    1
  6878. Itā€™s how they incorporate the parking brake
    1
  6879. I say upwind of such things, this includes brake clean spray
    1
  6880. It all started with the soldering iron, now Iā€™m starting a new collection as needs
    1
  6881. There were multiple complaints, didnā€™t hear brake noise over my yammering, went on to inspect other complaints and then inspected the brakes.
    1
  6882. Rust>brake pad. Itā€™s possible but could have chewed up the friction material. Perhaps doing it on occasion could prevent the build up
    1
  6883. I stay upwind, hold my breath and walk away to breathe after something like this. Not breathing that dust!
    1
  6884. Ā @dancingrick9627Ā  There is no debate IMO, theyā€™re two totally different technologies and both have their place. Forcing people to own things that they donā€™t want or need is the problem here. Donā€™t feel alienated itā€™s not an attack on EV people, but the politics around them are just wrong. šŸ˜‘
    1
  6885. I have a DI Mazda 2.3 that also needs it. I'll make a video on it soon.
    1
  6886. Because Eric O gave me the sound clip šŸ˜
    1
  6887. Nice town! Been there many times!
    1
  6888. Negative, this one utilizes a magnetic clutch mechanism, thatā€™s why it can turn both ways
    1
  6889. We have the money, there's a different set of obstacles in congress.
    1
  6890. Flaming walnut chunks!!!!
    1
  6891. Amsoil 15w40 signature series and heavy duty series should do it
    1
  6892. Ā @aenoymotorsĀ  That is a coding error on the page, we keep fixing it and it keeps reverting beck to $30
    1
  6893. I opened the valve
    1
  6894. It's not mixing with old fluid, the flow is a closed loop system. The cooler lines where I connect the machine doesn't allow it
    1
  6895. That is completely untrue sir
    1
  6896. Hello there šŸ‘‹
    1
  6897. Folk are done complying the overreach has gone too far
    1
  6898. We need to find you a Fl house
    1
  6899. There is no front mount cooler, take a closer look at the cooler on the bellhousing
    1
  6900. The EV production is bankrupting Ford
    1
  6901. Ok
    1
  6902. Bc the dealer told him he needed to rebuild it
    1
  6903. CPā€™s garage in YT. Heā€™s my friend. Heā€™s here to borrow a lift of an engine job
    1
  6904. fear of the unknown
    1
  6905. It was sprayed and wiped again, plus fluid drained and refilled
    1
  6906. Didn't think I had to take it apart 4 times
    1
  6907. It was also sprayed and the fluid changed
    1
  6908. Go to my website RainmanRaysRepairs.com
    1
  6909. Itā€™s tight I got it šŸ˜‰
    1
  6910. it was a monday
    1
  6911. No way, the channel members pay for it
    1
  6912. Both.
    1
  6913. they can be reset with a scanner and through a menu in the instrument cluster
    1
  6914. I donā€™t think it was actually a dealer like they said.
    1
  6915. LOL!
    1
  6916. Thatā€™s brake parts cleaner. Whatever may have made it into the drain hole will drain back out or evaporate. No harm
    1
  6917. Itā€™s been over torqued
    1
  6918. Sometimes folks show up drunk. Some people function normally and you can't really tell. Not saying that I think he was, but it's possible. Had a guy drop off a Dune buggy made with an old VW engine. He wanted us to install brake and turn signal lights that he provided. Couple days later, it was finished. He throw a fit over a $400 bill (4-5 hrs labor to install and wire everything) because he said that he could have done it himself and didn't understand why he had to pay for something that he was capable of doing himself! He had no memory of even bringing the thing to our shop. Fun Fact: That particular shop had a contract with the county to install the court order intoxalock devices.
    1
  6919. Slight valve train rattle on start up is totally normal happens all the time thatā€™s far less risky than micron size contaminants in a bearing
    1
  6920. Thatā€™s what the customer said when he walked in, the evidence told a different story
    1
  6921. Exactly! But that's how the guy came in...picked a fight from the get go.
    1
  6922. Reeeeee is my way of mocking the keyboard trolls around here, and sometimes in real life too. Someone starts in with negativity, I substitute Reeee in my head and then laugh it. Keep watching, youā€™ll hear a complainer in real life in my vids and then Iā€™ll chime in with Reeeeeeee.
    1
  6923. We use parts from many places. I wish we used Napa filters.
    1
  6924. Yeah you could try to do that but it would take a long time
    1
  6925. Yes it did. The threats looked ok, it had been overtorqued and I think the bolt stretched
    1
  6926. Ā @HueToobBlowsĀ šŸ˜šŸ˜šŸ¤™
    1
  6927. Thanks bro. Sometimes, not all the time, but sometimes I just rub people the wrong way. Itā€™s not intentional, but I really do have a way about me that really makes people not like me.
    1
  6928. They didnā€™t. That was my companies filter from a year ago. Iā€™m guessing that they didnā€™t change the oil filter when the pan reseal was done and just added oil. Thereā€™s a good possibility that that repair was not done at a dealership and the customer just told us that a dealership serviced it
    1
  6929. Itā€™s been overnighted and itā€™s stretched. That changes the pitch of the threads and the result it difficulty turning. I mentioned it, but in an instance like this itā€™s best to avoid ā€œup sellingā€ anything. Especially since that pan will be coming off again, itā€™s best to let the customer deal with the people who have warranty work to redo.
    1
  6930. ok
    1
  6931. I'm glad he made it through. Send him my regards!
    1
  6932. None, it all came off and is clogging the oil pickup tube
    1
  6933. Mind control
    1
  6934. Will not comply
    1
  6935. meh
    1
  6936. Ā @sed6Ā  lol šŸ¤£
    1
  6937. Oil poured into the fill hole and over the valves is still filtered before it goes through bearings. Any contaminates that go in through the top get washed down into the pan, picked up by the pump and sent into the filter for removal
    1
  6938. Exactly!!
    1
  6939. Whuuuuuaat?? Impressive!
    1
  6940. Just some brake parts cleaner
    1
  6941. I couldn't tell you how many times I have fallen asleep while editing
    1
  6942. Ā @LoganHester-1489Ā  let all play nice. We donā€™t know each other and the world is full of hate. Letā€™s become the change we want to see. (Ghandi)
    1
  6943. Itā€™s fun so let em have the fun. Donā€™t be a dick
    1
  6944. Go find the Subaru video where I ruined an engine. šŸ¤£
    1
  6945. You got it!!
    1
  6946. Very tired
    1
  6947. We did a service on the trans afterwards
    1
  6948. Negative, I have it
    1
  6949. Ā @texasguy-Ā  I did a fluid exchange on it
    1
  6950. Yes
    1
  6951. Late
    1
  6952. šŸ™ƒ
    1
  6953. It was run through the pump and straight into the filter. The bearings ALWAYS get filtered oil
    1
  6954. It survived
    1
  6955. Thank you for being here! ā˜ŗļø
    1
  6956. There were a few bolts in it, watch till the end youā€™ll see why
    1
  6957. The panel that I have is encased in some kind of epoxy or plastic, I bet itā€™s great for marine use
    1
  6958. Trying to find a trans that suitable. They donā€™t want to buy a reman and indict want to risk a sketchy 30/yo junk yard trans
    1
  6959. I figured they drove on em till they started coming apart šŸ¤·ā€ā™‚ļø
    1
  6960. Thatā€™s been happening for months to folks
    1
  6961. Ok if the booster isnā€™t leaking, you could have a faulty pressure/vacuum sensor (located on the booster at the vacuum line) However the lack of stopping power and they way you described it wouldnā€™t cause me to check and verify that a caliper is sticking. When you compressed the caliper pistons, was one harder to retract than the others. Iā€™d so it could be your problem. A sticking caliper should cause DTCs to set so if you have a stuck caliper, you may have more than one issue.
    1
  6962. Awesome of you to notice! I worked hard on that one.
    1
  6963. Because we have impounded vehicles here and vehicles that were towed and involved in accidents. Appointments are made online through RainmanRaysRepairs.Com
    1
  6964. I took it off for the scene
    1
  6965. Iā€™ve had success with their Import Direct products
    1
  6966. What did I change?
    1
  6967. It was my first day
    1
  6968. https://youtu.be/w170DrNhotA
    1
  6969. Oil Leak is the cover gasket, Noise is under the timing cover. Donā€™t need the valve covers off to get the timing job done.
    1
  6970. Iā€™ll do it
    1
  6971. Ā @Max_ellis74Ā  Negative, thatā€™s the EVAP purge valve for fuel tank vapors
    1
  6972. Ā @DonsJunkmail-vg1wtĀ  Don are you trolling? I think youā€™re trolling
    1
  6973. As a fellow contrarian, you are also empowered to have a shitty day
    1
  6974. šŸ˜³
    1
  6975. I moved it
    1
  6976. Bc the AC line blew up on my face
    1
  6977. Itā€™s been a few years since I touched one
    1
  6978. Truth hurts sometimes
    1
  6979. Yup
    1
  6980. I was in a collision on the left front, buddy shop and instance company said to replace the lf Suspension
    1
  6981. Naaah just having fun
    1
  6982. Ā @samuelk9256Ā  thatā€™s disconcerting (vocab word of the day)
    1
  6983. You canā€™t watch it bc it says gun? Seriously??šŸ¤¦ā€ā™‚ļø
    1
  6984. Exactly
    1
  6985. Ā @metalboy50Ā  Rainman Rays Repairs off duty
    1
  6986. Sheā€™s at home
    1
  6987. I don't think I need to officially declare a warranty on this. Reason being, if it's done well a warranty is irrelevant. And if it's wrong, I'll fix it as soon as possible. My customers know this. As for other repairs, the same applies. The terms on parts are dictated by the part manufacture. Most parts are warrantied against failure at 3/yr 36,000 miles. Point being a warranty on a repair is a "feel good" tactic, it's a sales pitch. Simply put, the job is done right or its done wrong.
    1
  6988. Red ones didn't fit the wire size on the new connector
    1
  6989. I do
    1
  6990. I ended up making an inspection video that I'll post on my second channel in a day or so. During said video the bearing was discussed. And the car is still at my lot, we have time.
    1
  6991. I ran out of tube again. Iā€™ll make another and put out in the second channel
    1
  6992. Ā @williamsquires3070Ā  Lol they were in this case. I did some reading and they say the Fluke will take 25a for 30 seconds or so. I realize it says 10a on the cover. The harbor freight leads werenā€™t having it though!
    1
  6993. It's fine, that fluke has a fuse
    1
  6994. Not soldering high current wires in the high heat high vibration area.
    1
  6995. Wow the algorithm is off. I've been back to normal for a few weeks now. And yea I was close to pneumonia, it sucked
    1
  6996. And you can do better?
    1
  6997. šŸ˜³
    1
  6998. Bc I ran out
    1
  6999. I donā€™t work with my voice, so I can do both
    1
  7000. Oil pan gasket, Iā€™ll fix that later itā€™s a big job
    1
  7001. Because GM built millions of these units. A unit is the proper noun to describe the machine.
    1
  7002. You should see what that drive in St. Louis Missouri
    1
  7003. Refresh YT that ws fixed 18 hours ago
    1
  7004. Play nice in here
    1
  7005. That writing be flippin awesome!
    1
  7006. They come onā€¦sometimes
    1
  7007. Iā€™m actually very right hand dominate, so I use my left hand as often as I can
    1
  7008. Happy Independence Day! šŸ«”
    1
  7009. Itā€™s a really nice one I like my 1/4ā€ canā€™t wait for the 3/8ā€
    1
  7010. Or go back and watch the first video where part of the complaint was an intermittent vibe
    1
  7011. I donā€™t ban people. I dont believe in censorship
    1
  7012. It's a coping mechanism from enduring years of stress and torment that comes with the business. XD
    1
  7013. Thought about it šŸ˜‚
    1
  7014. I can say it however I want. Thatā€™s what makes it fun
    1
  7015. I accept this
    1
  7016. Alright Dave! Challenge Accepted, lets measure out our cables.
    1
  7017. Yes
    1
  7018. It actually does, thatā€™s how weā€™re getting 300 hp out of little v6s
    1
  7019. Inside of the cover
    1
  7020. This counts as heavy duty
    1
  7021. lol I didnā€™t know. I was relating it to the Isuzu trucks where they put the truck model on the badge
    1
  7022. Nope same place, I have a couple older videos from another shop tho
    1
  7023. Yea some people hear it some donā€™t šŸ¤·ā€ā™‚ļø
    1
  7024. I sry, background music comes from YouTube I guess itā€™s still processing šŸ˜•
    1
  7025. Nope itā€™s new. I did a similar job on a suburban last month tho
    1
  7026. Ā @VanillaWahlbergĀ  Oh no my jokes are far more cruel
    1
  7027. Iā€™ve heard it hasnā€™t processed yet, so disappointing
    1
  7028. YouTube has excellent servers
    1
  7029. Iā€™m sorry itā€™s not playing. Itā€™s from the YT library, I dunno what itā€™s not running. Some folks hear it, some donā€™t.
    1
  7030. Ac water draining
    1
  7031. No itā€™s broken the music comes from YouTubeā€™s library
    1
  7032. 24 I misspoke
    1
  7033. About 6 hours
    1
  7034. So should I have drilled another hole in the ball joint?
    1
  7035. Negative, the taper wouldnā€™t match
    1
  7036. Lol, he owns the body shop next door šŸ¤£
    1
  7037. šŸ˜
    1
  7038. Thatā€™s a different truck
    1
  7039. Lol thatā€™s not mine, itā€™s another
    1
  7040. Whatā€™s flat rate?
    1
  7041. Thank you! Iā€™ll learn exposure now
    1
  7042. Who hurt you?
    1
  7043. Awesome! Thank you! Glad you're here!
    1
  7044. Iā€™m considering taking a class on this specific camera and maybe some photography lessons
    1
  7045. Iā€™m actually extra frustrated at this point. The screen on the camera looked very good. And then once I uploaded the footage into the editor, it looked darker. Then once it was uploaded to YouTube, it looked even worse.
    1
  7046. Eric sent me the sound clip šŸ’ŖšŸ’Ŗ
    1
  7047. Ummm 2022, anything can happen šŸ¤£
    1
  7048. SKYNET will activate soon šŸ˜³
    1
  7049. Google ā€œfuel line disconnect toolā€ thereā€™s many different types. Metal ones are the best
    1
  7050. You must try PB blaster
    1
  7051. Agreed
    1
  7052. Pt 2 is still Unlisted and only available through the links in the description and pinned comment on Pt1
    1
  7053. Whereā€™s my pitchfork
    1
  7054. so far so good, and it's running faster too
    1
  7055. Did a right hand drive E150 exist? No sarcasm, Iā€™d be interested to learn that
    1
  7056. Ā @OSXManĀ  Your right i was a bit vague. I apologize for any confusion. I donā€™t have an issue with the Chinese people or culture. But their business practices and government only serve to promote themselves at the detriment of everyone else on a global scale. Years ago there was an earthquake in China, where a building collapsed and killed several people. It was discovered that the contractors mixed landfill trash into the concrete to reduce the construction cost. Nobody was held accountable. My brake booster for example could have been installed by a DIYer who may not have caught the defect. That could have resulted in breaking loss, an accident, injury or death. Again the manufacturer works have never been held accountable. This type of thing is a huge problem these days. And again Chineseium refers to the concept above, not to the people.
    1
  7057. Negative. Posted live only once, there were available early through a link in part 1
    1
  7058. In the description
    1
  7059. I know Iā€™m terrible
    1
  7060. No. Most donā€™t want to keep that stuff
    1
  7061. I don't video everything I work on
    1
  7062. Well you unplug it to plug in the scanner
    1
  7063. No it a customers jeep
    1
  7064. If its called telegraphing, then that's exactly what I did
    1
  7065. Itā€™s a customers, the gears in the rear axle are destroyed. We didnā€™t know that in the beginning. Customer is putting a lot of work into this jeep. Due to the unexpected find, I volunteered to fix the damaged gears. To spice it up, I offered to upgrade the axle gears if the community did the šŸ‘ and Subscribe. Hence this video. (Btw we pulled it off and Iā€™m upgrading the axle for free for my customer
    1
  7066. My shop now. šŸ˜ I have my own place
    1
  7067. Exactly!
    1
  7068. Look up Webster's definition of unicorn using the first edition dictionary from the year 18xx-something
    1
  7069. Who AROD? He's a 20 year Senior Master Tech w/ Ford
    1
  7070. THANKS TO YOU!
    1
  7071. I will do a follow up if I get to repair this mess.
    1
  7072. It did look tasty didn't it?
    1
  7073. It's not GM fault this time. The timing cover was just resealed and the job was botched.
    1
  7074. Ya never know... it is a small world we live in!
    1
  7075. Tomato, TomAto same thing mostly
    1
  7076. Will do. I hope I get to make the repairs. I'll upload part two if I do.
    1
  7077. Buy here pay here lots are those shady little car lots you see that randomly pop up in less than desirable areas. They offer in-house financing. The down payment is usually their cost of the car and they want weekly cash payments from the buyer. They target folks with poor credit and low income.
    1
  7078. Tis the nickname for the gasket that seals the timing cover to the engine block where the coolant/anti freeze from the water pump passes through. It's round with little "wings" on both sides, and like kinda like a butterfly
    1
  7079. šŸ¤£
    1
  7080. I think that's a shadow
    1
  7081. Have you now? Can you link them here or send me links to my email? Itā€™s in the ā€œaboutā€ section on my home page. Iā€™ll have to copyright some people if theyā€™re reposting my stuff
    1
  7082. šŸ¤£
    1
  7083. I need to get the oil level correct, and get the garbage out. I had to determine the extent of the damage, this was step one. It ran well and stopped smoking with the oil level back to normal. Then I did a leak down test to determine if the heads were damaged. This engine can be saved. The question is, who's going to pay for it. I'm waiting on the owner and the car lot people to decide.
    1
  7084. They didn't lube the shafty bits this time
    1
  7085. šŸ¤¢šŸ¤®
    1
  7086. šŸ¤¢šŸ¤®
    1
  7087. Don't be fooled... It's conspiracy. The repair and maintenance system is rigged. Wendy's, Steak N Shake, BK and others have three same machines.
    1
  7088. HAAHAH
    1
  7089. It's a shady little dealer. They have all makes of used cars and tiny little office or trailer that the sales people work from. They buy inventory from auctions, then make things shiney and new looking, then resell to the public. They will finance the buyer in house. They target low income buyers or people with bad credit that can't get a good loan. You buy from them, and they want weekly payments made, usually in person with cash.
    1
  7090. Ā @deadmanfredĀ  sunny Florida
    1
  7091. Ā @ryanawilson8549Ā  sry Ryan, this was one of my first videos. Iā€™ve improved since
    1
  7092. It is.
    1
  7093. Timing cover leaked coolant into the oil pan. The repair is underway. I'll post it when I'm done.
    1
  7094. Ā @TheMookie1590Ā  when itā€™s time, theyā€™ll know what to do
    1
  7095. So gross. šŸ¤£
    1
  7096. Thats engine coolant mixed with oil. Caused by an internal coolant leak. It's pink in color because GM Dex Cool is dyed RED
    1
  7097. I think I can save it. If the owner or car lot approves the repairs, I'll make a part 2.
    1
  7098. It's oil and coolant mixed together. There's a coolant leak inside the engine.
    1
  7099. šŸ¤£šŸ¤£
    1
  7100. Because I don't want to get sued. I'm here to fix cars, and share a few things. Not to rip on other people's business.
    1
  7101. It's in the making.
    1
  7102. Technically thatā€™s irreverent, the damage is already done by the time it makes it to the shop, and checking the oil first serves to purpose except to waste time. The complaint stated that it died while driving. Step one is to determine if it is going to start or not. There are hundreds of reasons for an engine to shut off while driving, and oil is at the bottom of the list. The coolant smell and smoke emissions while running is the led me to check the oil but that wasnā€™t step one. Thanks for joining the conversation! āœŒļø
    1
  7103. Oh yea lemon laws and such!
    1
  7104. A failed repair, remember that the timing cover was new? It wasnā€™t sealed properly and the coolant leaked internally
    1
  7105. Coolant that leaked into the oil from behind the timing cover.
    1
  7106. Iā€™ll spray them too šŸ˜‚šŸ˜‚šŸ˜‚
    1
  7107. Sucks ā€¦. Sry you got the Roni Rona
    1
  7108. I have three more in the lot
    1
  7109. Oil is checked by draining the old part and adding that amount later.
    1
  7110. I did
    1
  7111. OEM vs aftermarket parts
    1
  7112. Itā€™s an aftermarket part, itā€™s cheaper for a reason IG
    1
  7113. Mark didnā€™t say that he does that on every system
    1
  7114. Truth be told, if I donā€™t show that part comments go full Reeeeeeeee! Our leak test is an idiot check so people donā€™t gas a system that has loose hoses or something. Case in point, this condenser would have passed a leak down check.
    1
  7115. Itā€™s all good, I know what Iā€™m getting myself into
    1
  7116. I estimated wrong when I was taking BTW. I earn more then $188 šŸ¤£šŸ‘
    1
  7117. Iā€™m fine with having Scottyā€™s people here. I will make them believe!!!
    1
  7118. I think it was just autozone brake clean
    1
  7119. Snappy snap on
    1
  7120. Once to cross the steps on the truck, itā€™s consensual
    1
  7121. šŸ˜‚šŸ˜‚šŸ‘
    1
  7122. New one didnā€™t Come with them. Aftermarket vs OEM šŸ¤·ā€ā™‚ļø
    1
  7123. OEM parts vs aftermarket.
    1
  7124. Little, I gave it a 1/4 oz off camera
    1
  7125. Itā€™s usually installed in the compressor. It can also be added with an injection device through one of the service ports, or the machine can inject it.
    1
  7126. They (YT)stuck in 9? Hmmmmmm I may have to do this manually in the future
    1
  7127. Iā€™m still learning
    1
  7128. Itā€™s just not bidirectional. I need to be able to issue commands to the car with the scanner.
    1
  7129. I have that one too. (The topdon) Itā€™s good for the $$. I made a video on it when I bought it and explained that itā€™s good, but itā€™s no snap on
    1
  7130. I still use it and itā€™s a good one for the $$$ (the topdon) But I needed to step up the game.
    1
  7131. Itā€™s not a re-post parts 2 3&4 were available early in the links from part one. Then I posted each part live each day after part one
    1
  7132. They still think im weirdā€¦and theyā€™re right šŸ˜‚
    1
  7133. Yeah I donā€™t have one itā€™s a low return on investment tool and they take up a lot of space maybe Iā€™ll get one later
    1
  7134. I hope you donā€™t have to either
    1
  7135. Most of my handtools are snap on and are not readily available online.The only place to get them are through snap on dealer and eBay maybe. But I canā€™t post eBay links because once the auction ends the link will become invalid and itā€™s a violation of YouTubeā€™s terms of service to have expired links
    1
  7136. I donā€™t know sounds like a false sense of security donā€™t think I will do that
    1
  7137. I didnā€™t repost it. part 2, 3and 4 were available only through the links that were in part one I then posted it live today
    1
  7138. Itā€™s a Toyota thing nobody understands
    1
  7139. That is not fair play. ā€œLetā€™s go Brandonā€
    1
  7140. We do it because they donā€™t slip
    1
  7141. I said oil change
    1
  7142. šŸ‘
    1
  7143. šŸ‘
    1
  7144. šŸ‘
    1
  7145. šŸ‘
    1
  7146. šŸ‘
    1
  7147. šŸ‘
    1
  7148. šŸ‘
    1
  7149. šŸ‘
    1
  7150. šŸ‘
    1
  7151. šŸ‘
    1
  7152. I want to go work at that shop, I could use a raise
    1
  7153. No no you're fine. Criticism is 100% encouraged around here. Thats how everyone can grow via discussion. It's people that step out of line and attack everything that are the problem. These are a problem in society. Karen gone wild
    1
  7154. Heyyy I have slick transitions tooā€¦..
    1
  7155. I wanted to so bad. My scope ws at home
    1
  7156. Absolutely! There are many long running jokes around here and a little troll baiting on occasion. The torque wrench was for them
    1
  7157. Nope I just thought itā€™s jumped time. Never expected a broke shaft. Havenā€™t seen one do this on an engine thatā€™s wasnā€™t raced or modified
    1
  7158. šŸ‘šŸ˜Ž
    1
  7159. I donā€™t believe in censorship. Blocking them goes agains my character, Iā€™d rather defeat them. (Itā€™s been months since this video was made and it worked)
    1
  7160. In the ocean Edit: lol Jk, it goes into a big drum then I have it removed and recycled
    1
  7161. Weā€™re looking into the BG policy to se if I can sell product. BG offers component protection when the services are performed with their products on or before certain mileage intervals. Their protection program couldnā€™t be offered on products sold without services performed. That being said I might not be able to distribute product without installing it. ( If I can I will, just need to make sure itā€™s allowed) If so Iā€™ll make it happen. Email me at the store at RainmainAppointments @ gmail
    1
  7162. Solar Pulse Battery Charge from Amazon: https://amzn.to/3O6t6fw
    1
  7163. You can find the real one by using the link from my web page
    1
  7164. I have a real one and there are many many fakes
    1
  7165. Just some mud I think, the salt has been washed repeatedly
    1
  7166. A very small unit of measurement
    1
  7167. Northern rust is real rust, most Florida rust is superficial
    1
  7168. Sure would, but itā€™s at home so I used the wire method
    1
  7169. It takes a couple drive cycles. Iā€™ve never actually driven one long enough to see it. Customers have told me it take a couple drives to calibrate. The bulletin says the same thing pretty much
    1
  7170. he never touched the inside
    1
  7171. 10.xx
    1
  7172. I guess you missed the part where I charged the battery
    1
  7173. šŸ‘‹
    1
  7174. Been there moved out. KC K & NW Ohio
    1
  7175. šŸ˜šŸ”„
    1
  7176. the other one is broken
    1
  7177. Link in the description āœŒļø
    1
  7178. FINAL Part! Running BAD! Stalling AFTER Timing Chains! Ford 5.4l 3-valve Expedition https://youtu.be/j4hFOiOcZjg
    1
  7179. Iā€™m take 1m šŸŽ‰
    1
  7180. It helps to lubricate it so the seal doesnā€™t tear when being pressed it. I used dielectric bc it wonā€™t degrade the rubber of the seals and is fairly inert
    1
  7181. I can go get them faster than the deliveries
    1
  7182. Iā€™ve killed 3 days so far šŸ˜¬
    1
  7183. I hand dismiss that for the time being bc I had unplugged injectors to check cylinder contribution
    1
  7184. I pulled the canister bc the tape connection to the intake was a vacuum leak. Canister deleted
    1
  7185. Not yet šŸ¤·ā€ā™‚ļø I think. If the cops get him , I doubt we would find out
    1
  7186. Tomorrow
    1
  7187. I knew it was wrong when said it šŸ¤¦ā€ā™‚ļø
    1
  7188. New crank sensor and o2
    1
  7189. Not yet, but I will find it
    1
  7190. The spare wasnā€™t road worthy as I already destroyed one tire and the old one was on the spare rack
    1
  7191. 6 acres and 6 more thatā€™s protected Florida wetlands, so I canā€™t touch it, but thatā€™s fine bc it means no one can cut down the trees outside of my property lines
    1
  7192. You're the second one that I've seen!
    1
  7193. I need em, I have to stack wood blocks back there and itā€™s annoying
    1
  7194. Itā€™s not mine, Aaron from @powerstroketechtalkw/AROD owns it
    1
  7195. $125 each, trailer tires are cheap
    1
  7196. I blame it on moving/holding a camera too lol
    1
  7197. I like to load a little hitch heavy, it rides hard but itā€™s safer
    1
  7198. True, but CTL doesnā€™t search well on TY šŸ˜‰
    1
  7199. I try not to think about it
    1
  7200. Itā€™s usually just age and lack of maintenance. Gm dexcool coolant is prone to doing this. Especially if the system is topped off with tap water and ignored for years.
    1
  7201. Found em
    1
  7202. Iā€™m not hemispherically inclusive yet
    1
  7203. šŸ‘€
    1
  7204. Doing things the hard way is like personal challenge to me, I think it's subconscious
    1
  7205. Well said with the perfect level of sarcasm...MINT!
    1
  7206. Best dating advice of 2024
    1
  7207. me too
    1
  7208. She says šŸ‘‹šŸ‘‹šŸ‘‹
    1
  7209. Itā€™s a create for an engine
    1
  7210. Jesus my new guy, not actual Jesus
    1
  7211. Because I need Jesus to do it for training
    1
  7212. I just know
    1
  7213. šŸ‘ it looks like this
    1
  7214. I like the BG bc it foams and that has its uses. PB blaster is a solid go to. Thatā€™s pretty much all that I use. I have some kroil for special circumstances
    1
  7215. to release the rusted retaining clip?
    1
  7216. Wonā€™t work, you still have to program the new key šŸ˜‰
    1
  7217. My mic broke, waiting for a new one šŸ¤·ā€ā™‚ļø sry
    1
  7218. I suppose you could šŸ¤”
    1
  7219. I did šŸ˜¬
    1
  7220. Happens all the timeā€¦but thatā€™s not my call
    1
  7221. Dad joke of that day šŸ¤£šŸ¤£
    1
  7222. Heeeey!!
    1
  7223. I love those lights, I have about 12 of them already. (From another project)
    1
  7224. I love those lights, I have about 12 of them already. (From another project)
    1
  7225. Fancy
    1
  7226. Hahahaha I fixed itā€¦. Words!
    1
  7227. The case was damaged at one of the bearing caps
    1
  7228. šŸšØšŸšØšŸšØPart 2 is ready to go! Click Here! https://youtu.be/GuXSjm0sh9E šŸšØšŸšØšŸšØšŸ‡ŗšŸ‡ø
    1
  7229. I check footage of I drop and loose something. Regarding the bolts nuts and screws, Iā€™ve never done it. I just group fasteners by type (size length etc) and place them together. Or Iā€™ll put them with the part that they go to. It works for me
    1
  7230. Ā @HueToobBlowsĀ  Thatā€™s right. And since nobody else was there except me, itā€™s my word that weā€™ll be going byšŸ¤Ŗ But Seriously, Itā€™s fine
    1
  7231. I knew this one was comingā€¦ ya got me! (Didnā€™t scratch it tho)
    1
  7232. Once you cross the steps itā€™s consensual. šŸ¤£. I know what you mean though.
    1
  7233. I was confident the seal was the source and felt rush was low. Thatā€™s why I put it back together to save time and be efficient. Iā€™ve had this wiper puller for YEARS and never used it. I usually place a wrench under the wiper arm and pry up, then tap the shaft with a mallet to break it free. But to avoid the onslaught of comments, I used the tool. It took forget to find it šŸ¤£šŸ¤£
    1
  7234. I made mention of that in the vid. it wasn't permanently left off
    1
  7235. Itā€™s coming a little at a time
    1
  7236. Yes it is
    1
  7237. šŸ˜‹
    1
  7238. Donā€™t give me any ideas
    1
  7239. It's all good my guy. That clamp was buttoned up. Good eye!
    1
  7240. https://youtu.be/6fZuCUpqvHw
    1
  7241. You must have missed the part where this wasnā€™t my job.
    1
  7242. Yea!!!
    1
  7243. Part 1 https://youtu.be/6fZuCUpqvHw. Sorry for the poor quality here. These are some of my first videos.
    1
  7244. Ā @jackfisher3906Ā  thatā€™s fantastic
    1
  7245. Iā€™m paid flat rate. Not hourly. Iā€™m on my clock.
    1
  7246. Yea the tool box moving was a result of Rusty meeting. And nope, Iā€™m forever done with the politics of dealership. I word for a smaller retail type company now. Quality of life is way up
    1
  7247. šŸ˜
    1
  7248. No I got itā€¦Good eye šŸ˜
    1
  7249. Naaaaw I saw it too ā˜ŗļø
    1
  7250. Different size ports on the lines. They canā€™t be connected backwards
    1
  7251. We have impound vehicle here. Can't have the yard open to the public
    1
  7252. Everything breaks!
    1
  7253. No time to let paint dryā€¦I thought about it
    1
  7254. Because your intuition is spot on šŸ˜‰
    1
  7255. Leaking valve and a discharged systemā€¦again
    1
  7256. Itā€™s been doing ok so far! And it has plenty of power for what I need. And I liked the price.
    1
  7257. It is leap Day!
    1
  7258. Theyā€™re offering ride alongs for a stupid amount of $$
    1
  7259. Oh theyā€™re hereā€¦.šŸ˜³šŸ˜¬
    1
  7260. NOPE
    1
  7261. I do not need pants šŸ‘–
    1
  7262. I just donā€™t have that Korean accent šŸ¤·ā€ā™‚ļøšŸ¤£
    1
  7263. It grew over the years
    1
  7264. It needs a frame off for sure! It needs everything. Like the ford axles and a V8
    1
  7265. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  7266. oooh thats too far
    1
  7267. Youā€™re looking much too deeply into this
    1
  7268. maybe
    1
  7269. Was it really that bad
    1
  7270. I wanted to buy it since last year, he finally decided to let it go
    1
  7271. When its finished she'll love it!
    1
  7272. yea but i really did buy the Jeep, someone has to save it
    1
  7273. Bc the valves are damaged- leak on number 3
    1
  7274. I have a TT but thereā€™s loads of fake accounts. My real TT link is in the descriptions. Rainman Ray 4real
    1
  7275. Pew pew pew šŸ‘šŸ¤£šŸ¤£
    1
  7276. But all my cars leave clean šŸ¤·ā€ā™‚ļø Weird
    1
  7277. My tester has a bag of extras in the box
    1
  7278. I treat those storms like theyā€™re coming straight for me. I have my eye on lee. If that one touches Fl Iā€™m going to feel it
    1
  7279. You tell ā€˜em!
    1
  7280. Itā€™s actually not
    1
  7281. Ā @ronaldbrown5745Ā  no when I first started the compression test, the gauge was reading zero psi, because the core that was in the tester was not allowing pressure to pass through the hose into the gauge. A quick course swap in the gauge began working again however, cylinder three was still low on compression.
    1
  7282. My set has extras not using tire cores
    1
  7283. Didnā€™t you say that in the last video
    1
  7284. I would have broken it 100%
    1
  7285. or it was a typo
    1
  7286. Hahahaha right!
    1
  7287. Did you just call me a Marxist
    1
  7288. Thereā€™s adapter harnesses that let the SW buttons work with the radio. Look on Crutchfield.con
    1
  7289. Drywall screws for the win
    1
  7290. I had it replaced about a year ago and didnā€™t think it would have been that difficult
    1
  7291. šŸ’ŖšŸ’ŖšŸ’Ŗ
    1
  7292. Noooooooo
    1
  7293. Hi C&L!!
    1
  7294. Boss Audio look for it on Crutchfield.con
    1
  7295. There is no give away, I think a scammer has contacted you. Take care friend
    1
  7296. typo! THX!
    1
  7297. Yup PWZ2 are the larger ones and PwZ 1 are smaller. I call them my angry pliers (theyā€™re usually used when a level of escalation is needed)
    1
  7298. Use a vpn
    1
  7299. Bet the farm on it
    1
  7300. And thank you for the info Larry!!!!
    1
  7301. Yea!!
    1
  7302. Iā€™ve been looking for a good set. Hard to find unless I buy a brand new unit. I might have to. Iā€™m going to get into an irreversible situation one day over no torches
    1
  7303. Not enough for this kind of thing, I have a few of them
    1
  7304. YT server is glitchy today šŸ¤·ā€ā™‚ļø
    1
  7305. Srq
    1
  7306. Customers are consumers
    1
  7307. I hope so
    1
  7308. Yes, I exchanged several thousand dollars to get the machine. Must recover investment
    1
  7309. Itā€™s getting body work soon
    1
  7310. No
    1
  7311. Sorry!
    1
  7312. Iā€™m not a body shop or safelite
    1
  7313. I hate that impact
    1
  7314. Yes it was a Nissan
    1
  7315. šŸ‘€
    1
  7316. No
    1
  7317. I make sure not to breath it in. I hold my breath then run away. Iā€™d hate to be taken out by parts cleaneršŸ¤™
    1
  7318. Non chlorinated! It doesnā€™t clean as well, but it wonā€™t kill me either
    1
  7319. Itā€™s torn and doesnā€™t stay
    1
  7320. Who knows theyā€™re the town bicycle now šŸ˜‚šŸ¤£šŸ¤£
    1
  7321. Left hand is in training
    1
  7322. I did yesterday, she gone
    1
  7323. Maybe the lighting??? itā€™s green
    1
  7324. Itā€™s methanol I think, gives it rich blue color and prevents freezing, bonus thereā€™s no residue leftover after it dries
    1
  7325. The 75w140 is green, it's a BG brand fluid and they're all green. the 80w90 wan't a BG fluid so it had regular oil color
    1
  7326. wiped with brake clean and towels
    1
  7327. šŸ‘† both are correct
    1
  7328. But did you see the part 1? You have to check out the intro!
    1
  7329. Yes I can use it on P/S systems, kinda of overkill for steering but can be done
    1
  7330. That patently false sir. ATF breaks down just like engine oil and needs to be replaced. Transmission shops rebuild, by the time they see one itā€™s already dead.
    1
  7331. Flap away ur good!
    1
  7332. I broke mine
    1
  7333. what if there is no pan?
    1
  7334. You mean the internal filter that you have to crack the case open to replace at 10.8 hours?
    1
  7335. Donā€™t drink it! Itā€™s not a Tide Pod šŸ˜‚
    1
  7336. Itā€™s fine buddy, youā€™re here through a link or endscreen button. This is an early release šŸ˜Ž
    1
  7337. Ā @bbbbbb1243Ā  you sure? I thought a said that. If I didnā€™t maybeI cut it out. Regardless, Iā€™d never cut a subframeā€¦. But I was tempted šŸ˜‚šŸ¤™
    1
  7338. I said I was justy kidding
    1
  7339. Easter egg video, Iā€™ll post it live soon
    1
  7340. Link in description
    1
  7341. I didnā€™t realize how inept I was till you got here to tell meā€¦thx
    1
  7342. Awesome, Iā€™m glad youā€™re here!
    1
  7343. Rainman Rays Repairs 4411 Bee Ridge Rd #305, Sarasota, FL 34233
    1
  7344. Try again tomorrow
    1
  7345. Nope, no space to put the manifold on, and a 100% chance of busting a plug
    1
  7346. Yea those immediately strip right off, Iā€™ve given up on them
    1
  7347. šŸ¤£šŸ¤£
    1
  7348. So far so good. Iā€™m enjoying the Milwaukee tools
    1
  7349. Arrrrghhh
    1
  7350. Just a little dirty šŸ˜‹
    1
  7351. I got it!!!
    1
  7352. šŸ˜¬
    1
  7353. Trailer Tires
    1
  7354. Mike thank you good sir!!! More brake clean!!
    1
  7355. The rear unit was blown leaking. (Theyā€™re fluid filled)
    1
  7356. Brain lapse moment ā€¦see pinned comment
    1
  7357. I knowā€¦I totally screwed that one up.šŸ¤£šŸ¤£
    1
  7358. Gas powered ratchets???? šŸ˜
    1
  7359. Sheā€™s editing it now šŸ˜Š
    1
  7360. We were discussing English speech quarks not math šŸ¤£šŸ¤£šŸ¤£
    1
  7361. Soon!
    1
  7362. It went tot he junk pile
    1
  7363. No
    1
  7364. I get a new one when theyā€™re available. Sometimes remans are all thats out there. This one ws a new motorcraft unit
    1
  7365. 2a
    1
  7366. Ā @clbcl5Ā  šŸ¤£šŸ¤£šŸ¤£šŸ¤£ Tell her I said hello šŸ˜Š
    1
  7367. Awww Chuck ur no idiot šŸ«‚
    1
  7368. He went in to other things, the 9-5 deal wasnā€™t fitting his goals. No hard feelings and we still talk
    1
  7369. Itā€™s a little cold right now
    1
  7370. Ā @rickchowsr2532Ā  šŸ˜šŸ¤™
    1
  7371. Those are electric. And I greased the gears in the angle polisher. Not the pneumatic motor. šŸŽ¤šŸ’§
    1
  7372. Green one is 3/8ā€ long shank, I have a red 3/8!short shank. The other two red ones are 1/4ā€ drive long and short shanks
    1
  7373. There is a 90* gear drive on this one
    1
  7374. Thank you. And thank you for your service! Take care of yourself
    1
  7375. ā¤ļø
    1
  7376. Naaaaw, we can do what we want here
    1
  7377. I want a 4 post, itā€™s what we need
    1
  7378. No room to turn, the truck was all the way against the building with 3 ft between the trailer and the box, thatā€™s why we used the Skid to move the trailer so the truck could back up and make the turn
    1
  7379. šŸ¤£šŸ¤£
    1
  7380. Facts!!
    1
  7381. Well theyā€™re better than a wooden shed šŸ¤·ā€ā™‚ļø
    1
  7382. Refresh, they are there
    1
  7383. I dunno. I have checked and links on there from what I see.
    1
  7384. All salt water, we had 8 feet storm surge on top of the waves and wind
    1
  7385. Yea w few cops had the 4 wheelers and UTVs
    1
  7386. My favorite fishing spot is about a mile off of Rod & Reel. Good shark fights at the mouth of the river
    1
  7387. They have most of them towed out today (Sunday) A few already burnt down and they took houses with them.
    1
  7388. The Tiki huts survived! Come back, weā€™ll get it fixed up!
    1
  7389. I have lsd out back, 4lo for traction control better torque to the ground from a stand still. I Ran 4hi most of the time. I need a winch now
    1
  7390. šŸ¤£ ā€œwho would ever need a truck like thatā€
    1
  7391. Ā @Jumalten001Ā  crime is predictable, votes donā€™t influence natural disasters edit: you can vote for policy that allows for more crime. See how stupid you sound?
    1
  7392. Many tourists stayed, some said they didnā€™t even know is there was a hurricane. There were a lot of full timers that stayed as well. We didnt think there was going to be an 8-12ft surge, the news kept saying itā€™s ok bc the tide is low and surge was 3-6ā€™. The tide didnā€™t matter. Bradenton beach is devastated. The entire island was under water all night. Last I heard FPL said on their FB that it could take 1-2 years to get full power back to Bradenton Beach. The line underground was damaged. (This could change but thatā€™s what was posted) Holmes beach did the best but every single building was flooded. The homes on stilts suffered foundation damage in some places. I didnā€™t see coquina, longboat or the west side of Anna Maria on the north side. Bean point is still there but they took major flooding too. The water lines were up over the mailboxes. I wish I had better news, but itā€™s bad.
    1
  7393. I have no fuse. Havenā€™t slept in 3 days. Living off water soda and beef jerky. Tired, hurt, filthy and I need a shower
    1
  7394. Itā€™s not really a truck if itā€™s peg legged
    1
  7395. Seriously! šŸ˜
    1
  7396. Yes
    1
  7397. I bent my trailer hitch. I did NOT like snatching with a chain
    1
  7398. The buildings were in 5 feet of water
    1
  7399. The wind took out the panhandle towns up north. Theyā€™ve been raised to the ground
    1
  7400. We have dozers and skid steers šŸ˜
    1
  7401. Thatā€™s the sand that was bulldozed from the road after
    1
  7402. Do you think it would have helped if we all got vaccinated?
    1
  7403. Youā€™re right, Iā€™m silly and meant to say sulfur.
    1
  7404. Ratcheting flex head wrench, extra long. Matco makes, ā€œmountain toolsā€ has a similar design
    1
  7405. Thatā€™s too bad, it started on the 38th time šŸ¤£
    1
  7406. you caught me trolling every time
    1
  7407. It was time to stop after finding the trans problem. The oil leak was everything.
    1
  7408. Me too
    1
  7409. Sulfuric acid. I misspoke
    1
  7410. There were none, ECM lost itā€™s stored data due to the dead battery
    1
  7411. But it was FUN!
    1
  7412. I mean it does say coffee on the can šŸ¤£
    1
  7413. Vegas
    1
  7414. Tow truck backed in and we picked it up off of the truck with the lift
    1
  7415. Yes yes and yes
    1
  7416. 1/2ā€
    1
  7417. Ā @JohnDoe-hc6ixĀ  Theyā€™re not specific, unless marked or physically different in dimensions.
    1
  7418. Milwaukee. Theyā€™re a decent price and sold retail. If you want Gucci ratchets, get snap on
    1
  7419. Oh no, work is one aspect of life, my videos are another and I keep them as separated as possible. Although I do record myself at work, I personally own the footage, therefore Iā€™m free to do what I such with it.
    1
  7420. I have one and I dislike it. I canā€™t get up close, plus I often have my head turned so I can reach into far away places or odd angles
    1
  7421. We were past extractors and vice grips
    1
  7422. Iā€™m not a welder
    1
  7423. Different kinds of oil. The pumps have bulk regular oil, the stuff filled with the jugs are synthetics and blends
    1
  7424. There are no stupid questions! Yea it kinda does. The element is made to flow one direction. It'll work backwards but I think airflow is restricted.
    1
  7425. šŸ¤£šŸ‘
    1
  7426. More POWER!!
    1
  7427. I doā€¦sometimes
    1
  7428. I noticed and have been using an iPhone for close ups šŸ˜‰
    1
  7429. It comes with the gaskets, could have gotten away without, but it was the best practice
    1
  7430. Youā€™re close, real close.
    1
  7431. Thatā€™s exactly what GM says to do. Edit: the butt connectors were even included with the pigtail
    1
  7432. I asked for that onešŸ¤Ŗ
    1
  7433. Been driving it randomly to make sure it still runs and shifts. We out the running board back on and fixed the brake switch.
    1
  7434. I think thatā€™s pretty close. I think the battery died long ago bc the brake switch was stuck on. I think it sat around for months eventually forgetting its security key, and nobody could figure it out. Then I think the hurricane came and the opportunity presented itself to cash out. It was submitted as storm damage, the adjuster pencil whipped the claim (bc theyā€™re processing thousands) and it ended up falsely listed as a flood car.
    1
  7435. Itā€™s a gaming laptop from Costco, the graphics card is hot rodded. Usually gaming computes will be loaded with lights. I own it for the storage & processing, the lights are a bonus bc they look cool šŸ˜Ž
    1
  7436. Memories forgotten ha ha ha ha ha ha
    1
  7437. Absolutely NOT! The flat rate pay, drama, cut-throat abuse is OVER and Iā€™ll never go back
    1
  7438. This truck was built in the ā€œpre-destroy everything and start a series of wars to rob the American public of their futureā€ era
    1
  7439. Algorithm things it comes and goesā€¦ Everybodyā€™s focusing on politics and natural disasters right now
    1
  7440. Body shop
    1
  7441. I dunno, Iā€™ve been running my 1/4ā€ driver for two years (almost daily) and my 1/2ā€ gun daily for 6 mo
    1
  7442. Yes, but I do loose them all the time
    1
  7443. šŸ¤£
    1
  7444. I could really use a tractor or skid steer!
    1
  7445. how?
    1
  7446. Sat and Sun. He had the option to take the 1st as well, chose to come work. I'm no slave driver
    1
  7447. yes
    1
  7448. noooooooooo prefill
    1
  7449. Ā @brucewood4652Ā  yes! I do have it!!! No gift receipt in the box. Thank you I appreciate this creeper itā€™s quite useful!!
    1
  7450. Ā @kevink8481Ā  calm down @kevin8481 everything is fine
    1
  7451. Ā @brucewood4652Ā  I havenā€™t picked up the mail in a couple weeks. What did you send?
    1
  7452. what?Ā @CrimeVidĀ 
    1
  7453. Ā @DavidSmith-sw5kgĀ  Lets bring it back!!
    1
  7454. How do you know what I charge for?
    1
  7455. no, do not fill oil filters
    1
  7456. NEVER!
    1
  7457. A man who appeals to the law against fellow man is a fool
    1
  7458. Challenge accepted
    1
  7459. I was afraid of that actually.
    1
  7460. Thanks for watching! Have a great day!
    1
  7461. Glad you're here! That's for watching!
    1
  7462. šŸŽ‰
    1
  7463. You and me both! šŸ˜
    1
  7464. No way. The knife is more entertaining for you. Nobody wants to see me do things the safe way šŸ¤£
    1
  7465. That's two words
    1
  7466. Agreed. They didnā€™t want to pull the plug, they wanted to get it back home to pick a bone with the other shop. We didnā€™t charge them anything for this either.
    1
  7467. Not fake
    1
  7468. Face slap
    1
  7469. Sorry, Iā€™ll do better
    1
  7470. It was free.99
    1
  7471. Stained gloves is not the same as oil on the gloves. Gloves get wiped down several times better theyā€™re replaced. I donā€™t leave oils in cars
    1
  7472. Nope declined additional repairs after charging the system
    1
  7473. I dunno thatā€™s googles thing šŸ¤·ā€ā™‚ļø
    1
  7474. Likes canā€™t be responded to, but I can do it in the comments
    1
  7475. Negative you can set it how you want
    1
  7476. Itā€™s not ready to go in just yet. I comes with an EGT probe and I have to pull off an exhaust manifold to drill and tap it for the sensor.
    1
  7477. Ā @jackjacke4654Ā  I wish I could give you more info but I need some more details to point you in the right direction.
    1
  7478. Ā @jackjacke4654Ā  There are 10,000 scanners, but Iā€™m not buying one lol. The sea thing could be several things, It could have a faulty impact sensor or module, broken wire or even a failed airbag. Do you know what the DTC is?
    1
  7479. Itā€™s a $2500 scan tool. SRS is supplemental restraint system. It has a problem with the airbags
    1
  7480. Check their website BanksPower.com The setup works on almost everything
    1
  7481. I did do it to my own vehicle
    1
  7482. Itā€™s worth it šŸ˜ˆ
    1
  7483. Always!!
    1
  7484. My UTV/side by side has a CVT and I hate it šŸ¤£
    1
  7485. Trigger control šŸ˜
    1
  7486. Not really, the car is so light and so short that the imbalance doesnā€™t influence safety or lift stability. Super long trucks, dually trucks and cargo vans are a different story
    1
  7487. Look into the Autel line theyā€™re really good
    1
  7488. Yup
    1
  7489. Challenge accepted!
    1
  7490. I was waiting for someone to catch that šŸ˜‚šŸ˜‚
    1
  7491. šŸ˜Ž
    1
  7492. Iā€™m not going to do it šŸ˜ˆ
    1
  7493. šŸ¤£šŸ¤£
    1
  7494. Wasnā€™t meā€¦.
    1
  7495. Whereā€™s the fun in that?
    1
  7496. Ohh Iā€™m not bothered
    1
  7497. Thereā€™s some things that you just canā€™t un-see šŸ¤£šŸ¤£
    1
  7498. šŸ¤£ Ohhh it was crazy!
    1
  7499. Canā€™t do it, theyā€™ll call me racist
    1
  7500. Not kiddingā€¦Still waiting on parts! I need two rubber gaskets for the oil pump ports on the timing cover.
    1
  7501. šŸ¤ÆšŸ¤ÆšŸ¤Æ
    1
  7502. šŸ¤£šŸ¤£
    1
  7503. šŸ¤£
    1
  7504. šŸ¤«
    1
  7505. Yes
    1
  7506. Iā€™m in agreement with you 100%! Having worked for a tow company, in another life, I always wondered how the drivers damaged the trucks. Now I know!
    1
  7507. Right!
    1
  7508. waiting for engine
    1
  7509. Finger is good
    1
  7510. waiting
    1
  7511. šŸ¤£šŸ¤£šŸ¤£
    1
  7512. Go to the YouTube page and click the About Tab. It has mailing address to my po box. Or send to my shop at 1035 26th Ave E Bradenton Fl 34208
    1
  7513. AFM is active fuel management. The engines have the ability to switch between 4-cylinder mode and V8 mode. The event I speak of is the transition into and out of these modes. The new style LT 5th generation V8 has a similar system called DOD displacement on demand. DOD has the ability to cancel up to 7 cylinders. All eight cylinders are equipped with these types of lifters.
    1
  7514. Lol now we have DOD displacement on demand. It's not just 4 cylinders, is all 8.
    1
  7515. šŸ˜‚šŸ¤£
    1
  7516. Yea it did. I had one for lunch and then I had a real bad night šŸ¤¢šŸ¤®
    1
  7517. I give live commentary. It's usually just whatever I'm thinking. No disrespect to anyone.
    1
  7518. No can do. Gotta meet emissions numbers.
    1
  7519. @Jeff CuevasĀ  https://youtu.be/zczBVy7jE0w Here's part three of the series. There's a button at the begging for part 2 also. I handled three manager overreach situation. You'll see about half way through this one. The video isn't public yet, but you guys are cool. šŸ˜Ž
    1
  7520. šŸ‘
    1
  7521. Yes got me. Slip of the young. šŸ˜œ
    1
  7522. My guy! Wecome back.
    1
  7523. They decided to shove a 10-speed transmission into a case designed for a 6-speed. Meaning all the parts got a little bit smaller. And if you try to use the truck for a truck like towing or hauling it's endless non-stop up shifts and downshifts. If not managed perfectly those transmissions eat themselves alive.
    1
  7524. I haven't had experience with disablers. I know many people in face choose to disable the system and some remove the lifters all together in favor of a normal non-failing lifter.
    1
  7525. šŸ˜
    1
  7526. Thatā€™s the sad part. These engines are bulletproof except for the fuel management cylinder cancelation. Itā€™s the EPA and emissions certification numbers that have forced the system to exist at begin with. This is what we get for allowing the government to finger bang the engineers!
    1
  7527. No your right, I pulled a number 2 pushrod by mistake. Figured it out shortly after when I had a better view. šŸ¤£āœŒļø
    1
  7528. It locks so it doesnā€™t contact the wheel
    1
  7529. Itā€™s a same isnā€™t it
    1
  7530. I donā€™t recall mentioning anything about special applications or size changes. This would include towing also. My video covered the ā€˜ruleā€™ not the exceptions. No bs was given here
    1
  7531. I run my trailers at max pressure. The load capacity of trailer tires is proportional to air pressure. Ex ā€œMax capacity is 2500lbs@50psiā€ And since trailer tires are made to carry loads and arenā€™t made for steering or braking, they should be run at max pressure. (Yes I understand that some trailers have brakes)
    1
  7532. Yea you can and should run a higher when towing. There is usually a chart in the manual for recommendations.
    1
  7533. Hey thanks! Amazon Pays 2-5% of the pretax sale price through any link that I post. One guy used my link and bought yogurt and canned cat food and I made $0.68 šŸ˜ I did the links for the pliers because a lot of people were asking about them. The $$ isnā€™t huge but Iā€™m glad to help folks out. I did manage to sell about 30 pairs of pliers with this link. To me that means that 30 people donā€™t have to use adjustable pliers that slip off anymore, and thatā€™s a win! That snanner has held up so far too, Iā€™ve dropped it a few times and itā€™s still going. Btw I canā€™t see who bought an item, only that it was sold
    1
  7534. Ohh no not using those itā€™s just too easy, I have challenge myself
    1
  7535. We called him today to get him back in to do an oil flush. I donā€™t know if itā€™s scheduled yet.
    1
  7536. The thought did cross my mind šŸ¤ž
    1
  7537. Iā€™m not sure what the bill was. They were charged book time plus hoses and gadgets, and got a free oil change. I think it was 6.2 hr
    1
  7538. No the case. I did clear them, the oil pressure problem/complaint was that the gauge drops out at random, I drove it later that afternoon and the gauge would bounce and fall to zero. It havenā€™t set code yet. I think it has a short in the wire somewhere, could be a fault in the gauge cluster too.
    1
  7539. Thatā€™s fantastic! Iā€™m glad he didnā€™t buy a lemon or a money pit!
    1
  7540. Agreed, if it were mine it would have
    1
  7541. Ya know, Iā€™m just old school like that. Fancy machines are awesome. But I like to say ā€œthere are 1000 different ways to do it rightā€
    1
  7542. Yup got we got blasted this morning by one
    1
  7543. It could but that doesnā€™t explain the leak into the intake port
    1
  7544. Bc I wanted to smoke test it
    1
  7545. šŸ‘šŸ‘šŸ‘
    1
  7546. Trans mount* itā€™s rubberā€¦. Did I say crossmember ? Big oops if I did. My brain does weird association things sometimes. Ex. If I was looking at the member , talking about the mount, I could have said member. I do that stuff all the time
    1
  7547. The mount was rubber,. The rubber part will swell and come apart when saturated
    1
  7548. šŸ˜‰
    1
  7549. Yes it does
    1
  7550. šŸ¤£šŸ˜
    1
  7551. šŸ˜‰
    1
  7552. Real estate...its all about real estate. It's also looking like recession is looming right now. My risk tolerance has certainly changed in the past few months,. The opportunity will show up when its right
    1
  7553. I guess Iā€™m no good šŸ¤£
    1
  7554. ā¤ļøšŸ‘
    1
  7555. Available through a link only before today
    1
  7556. I know
    1
  7557. Another great one goes down šŸ˜ž
    1
  7558. Yes
    1
  7559. Ā @jamram9924Ā  Yea I'm pretty good at my job.
    1
  7560. EXACTLY!
    1
  7561. Awesome. Thanks for watching!
    1
  7562. Thanks Dave! Much appreciated!
    1
  7563. If they keep it up Canada will soon outlaw Canadians
    1
  7564. It is, buuuuut that's just the outer lip. It's fine, I'd let it ride if it were on my car. It wont affect the strength of the threads.
    1
  7565. Gotcha!
    1
  7566. Oh no the retainer clip just locks the connector on. As far as I know, replacements can't be aquired.
    1
  7567. I wish I could control the add types. I donā€™t endorse fixed or any similar product
    1
  7568. I never noticed that...I think it is šŸ¤£
    1
  7569. Thanks for watching my man. We've all found some strange things in our world. I think I lucked out on this one and so did the owner. It's wasn't covered by warranty to his displeasure. I made up for it by not billing full boat on this one. But you're right, I would have gone after it had emissions or power train been paying the bill.
    1
  7570. I notice it till I was editing šŸ˜¬
    1
  7571. Me too. I didnā€™t see it till I was editing. From my point of view the radiator support was blocking the dirt
    1
  7572. https://youtu.be/w5fRd-RhlQw Unlisted Video follow up.. bc you asked šŸ˜Ž
    1
  7573. Yea thatā€™s why I have to change speeds and mute the audio on occasion
    1
  7574. Odd I dunno, I havenā€™t taken any down
    1
  7575. Itā€™s ok. I let little Easter eggs slip sometimes šŸ˜‰
    1
  7576. Copyrightā€¦ I had to break up the audio
    1
  7577. yea...oops
    1
  7578. Nooo itā€™s a ā€œdo moreā€
    1
  7579. blocked it enough lol
    1
  7580. Bc that wouldnā€™t tell me where the oil came from.
    1
  7581. The steam cleaned piston said enough, it's major repair time. I dont think they want to proceed at this point. Next step is to pull the head off. It could be probably be fixed.
    1
  7582. We don't listen to Trudeau
    1
  7583. People are freaking out right now over this...I don't get it
    1
  7584. Ā @Mr_ToodlesĀ  it is ā˜ŗļø
    1
  7585. Its back
    1
  7586. Fl tag on the back and Cali tag on the front
    1
  7587. Canā€™t please everyone šŸ¤·ā€ā™‚ļø maybe next time
    1
  7588. šŸ˜³
    1
  7589. Youā€™re late
    1
  7590. Saw this 6 days later...that's a strong accusation sir. I may be a fool but I'm not an idiot. I can get plenty of views with Toyota Corollas and beat up F-150s. Do I think a BTTF car is good content? ABSOLUTLY! Would I knowingly commit fraud in a public forum for some money? NOT A CHANCE! I'd rather sell out to sponsors and make a Pay to Play mobile game commercials. If there is foul play it will come to light sooner or later.
    1
  7591. Ā @davide.s.9880Ā  Is cool if I complain about taxes on occasion šŸ˜
    1
  7592. I never said how I lean
    1
  7593. Visiting for the week heā€™s from Michigan
    1
  7594. I actually have the 3/8 and the 1/2ā€. I use the 3/8 much more often than the 1/2. And they make the same power.
    1
  7595. Thatā€™s not true
    1
  7596. Lift comes in next week!
    1
  7597. For next time šŸ‘šŸ‘
    1
  7598. All dog (can) bite. Especially those little ones.
    1
  7599. More taxes!
    1
  7600. šŸ˜ˆšŸ˜ˆšŸ˜ˆ
    1
  7601. You stop that šŸ¤£
    1
  7602. Iā€™ve never been called a septic tank before šŸ¤£šŸ¤£šŸ¤£
    1
  7603. šŸ‘
    1
  7604. Thatā€™s fine, donā€™t forget to connect those ground wires body shop guy.
    1
  7605. Ur like 20 behind on the global warming rah rah rah. They call it climate change now, is more vague šŸ¤£šŸ¤£ Had to change it when sea level didnā€™t rise
    1
  7606. Dexcool šŸ™ƒ
    1
  7607. Iā€™m sorry to hear the news. My condolences to you and your family šŸ˜”
    1
  7608. You missed a lot
    1
  7609. Really?? šŸ˜³
    1
  7610. no way, the OEMs don't put fittings on u joints anymore. Some of the aftermarket joints have them
    1
  7611. Thatā€™s the problem with the Walking Dead seriesā€¦we were all conditioned for those kinds of zombies. But we got was a more mild variant
    1
  7612. The canister ifs full of fuel. They donā€™t get to come back for that. Rewatch the end where the fuel is dumping out
    1
  7613. Nope not yetā€¦.I get a generator on occasion
    1
  7614. šŸ‘
    1
  7615. See what Iā€™ve done here? šŸ˜. Plenty of comments and šŸ‘šŸ‘. Only 7 people thought to šŸ‘Ž My subliminal messages are working
    1
  7616. I dunno could be, the diagram pointed to that module in a pic, stated it was an AC amplifier relating to the HVAC code. Iā€™ll tell ya, when I pulled it out, as per the flow chartā€¦ ā€œsomething isnā€™t right, this is BSā€ went through my head. So ā€œšŸ–•Alldata Iā€™m going to fail this compressor nowā€ came next.
    1
  7617. šŸ˜¬sry
    1
  7618. Check out the description or pinned comment for part 2
    1
  7619. Maybe he returns used car parts šŸ˜‚šŸ˜‚
    1
  7620. Yes I can
    1
  7621. Inflation is the devaluation of currency by producing and excessive supply.
    1
  7622. FR
    1
  7623. The strength of the economy is great. But the value of the dollar has been crushed in recent years. Hence my generalized commentā€¦.money devalued = economic decline IMO
    1
  7624. Parts came from Tampa šŸ¤·ā€ā™‚ļø
    1
  7625. Call out everybody
    1
  7626. Just petty larceny, and another video about setting pinion bearing preload
    1
  7627. Leave some for pt 2 šŸ˜‰
    1
  7628. I was the window & grill/sautĆ© guy. I got to yell at the whole restaurant all night long šŸ¤£šŸ¤£
    1
  7629. Is NoT
    1
  7630. Itā€™s about two hours north of me
    1
  7631. I literally just noticed. Itā€™s been posted for 3 hours šŸ¤¦ā€ā™‚ļø
    1
  7632. And itā€™s broken šŸ˜ž
    1
  7633. Thatā€™s Troyā€™s Pre-wife unit šŸ¤£šŸ¤£šŸ¤£
    1
  7634. Thanks Dave! The Jeeps thank you!!
    1
  7635. Folks canā€™t afford gas, how can they afford repairs? Iā€™m going to start working on the barter system. I accept metals like lead, brass, silver ect.
    1
  7636. My brain does weird things with words sometimes
    1
  7637. Thatā€™s how you know ur getting older.šŸ˜‰ Production date was 07/08. Crazy I feel like these should be newer as well
    1
  7638. I was hoping nobody would see that, bc I didnā€™t till it was uploaded šŸ¤£šŸ¤£šŸ¤£ And it was 2am no way was I going to upload it again
    1
  7639. Yesssss
    1
  7640. Yes where have you been? YT not showing my videos?? Gotta turn on that notification bell šŸ””
    1
  7641. It actually will/can damage a nator
    1
  7642. Iā€™ll probably move the new delco alternator to the other side to replace the car quest reman thatā€™s currently installed, then if I need to add a larger capacity alternator in the aux position. Itā€™ll depend on the amp draw of the inverters and the amp load on my wiring. Its going to take a few stages of reconfiguring until the system is right
    1
  7643. Probably
    1
  7644. Have the hubs checked to see if they have runout
    1
  7645. Itā€™ll be okā€¦yes I know better
    1
  7646. We got ours with hurricane Ian, itā€™s Californias turn
    1
  7647. Then Iā€™ll connect both alternators via a solenoid and have about 200a available to run inverters. Again, I need to take real measurements. Keep in mind that with my potential loads that Iā€™m planning on, I may not need 2000-3000w at all times. Letā€™s say Iā€™m running two refrigerators, two fans a tv and some lights. The fans will need 120w each, lights will total 40w and the tv/internet will draw 250w. So Iā€™m at about 500w, add a refrigerator, weā€™re at 800w that came with a 500w startup draw for 2-5 seconds. So the system load is now 800/1300w. It would support a second fridge as long as both units do not come in at the same moment. Having said that the alternators have to send back about 1000-1200w to keep up with the demand. All of the figures are estimates and nothing has been measured yet with meters on the DC side or the AC side
    1
  7648. We will get to all of that soon. Right now itā€™s barely functioning and has been made to work. I need to finish fusing and wiring the inverters, there must be breakers and solenoids installed. I need to take amp draw measurements and make sure that my wire sizes are correct. It will take several hours to have a finished and save setup that can run long term
    1
  7649. Vents with fans in them
    1
  7650. My survivalist crap hasnā€™t let me down in the past two major hurricanes that we had. ā€œTwo is one, and one is noneā€
    1
  7651. Iā€™ll test all of the amp draws after I make some proper connections. I still need to fuse everything and wire the breakers and solenoids
    1
  7652. šŸ˜‚šŸ˜‚šŸ˜‚
    1
  7653. The threads didnā€™t run down the shank all the way
    1
  7654. Someone changed the belt once and the ratchet used on the tensioner smashed the cooling fins
    1
  7655. I can operate a backhoe also šŸ˜‰
    1
  7656. What am I missing here??
    1
  7657. Sounds like a challenge
    1
  7658. That would be true sorcery šŸ¤£
    1
  7659. I beg to differ, I found visually displeasing to look at because of the sudden brightness changes. Plus I thought it was funny šŸ˜‰šŸ¤™
    1
  7660. Donā€™t forget Eric O at South Main Auto, heā€™s the GOAT šŸ
    1
  7661. I consider GoPros to be sacrificialā€¦it comes with the territory. Even without abuse they start to get glitchy after a few months.
    1
  7662. I edit that out šŸ˜‰
    1
  7663. Ā @shermanmcgrew8190Ā  šŸ¤£šŸ¤£ ya got me!
    1
  7664. Itā€™s called climate change now, global warming was the 90s word šŸ¤¤šŸ¤£šŸ¤£
    1
  7665. Skills!!
    1
  7666. Zinc welds no joke ā˜ ļø
    1
  7667. Ā @jeepz9618Ā  I didnā€™t realize. šŸ˜¬
    1
  7668. Itā€™s an admin day
    1
  7669. Couldnā€™t have been that badā€¦I sry šŸ˜ž
    1
  7670. Really??
    1
  7671. Theyā€™re comfy
    1
  7672. Iā€™m a rap master šŸ¤£
    1
  7673. I heard about the trailhawk earlier, I want it šŸ¤£
    1
  7674. Two of em actually
    1
  7675. Yes
    1
  7676. The head cam and chest cam are no good for my recording style Iā€™ve tried b4
    1
  7677. Monologue is key
    1
  7678. TY! Itā€™s purpose built and some donā€™t see the value in its capabilities
    1
  7679. Someone wants it!
    1
  7680. I dunno wasnā€™t thinking about it, itā€™s not abnormal to shuffle a car around with the hood open
    1
  7681. Chocolate chip cookie dough
    1
  7682. I donā€™t day drink
    1
  7683. Short lived?
    1
  7684. Not mine, I would LS swap it
    1
  7685. It was a guaranteed win win for all
    1
  7686. Nope
    1
  7687. Not a deal really, itā€™s going to cost me like $600 for the parts Edit: this isnā€™t me jeep
    1
  7688. Well I felt like it šŸ˜‹
    1
  7689. One thing at a time
    1
  7690. Nope
    1
  7691. Itā€™s fun! And a good show!
    1
  7692. I sell it at cost Edit: no shame here
    1
  7693. Hmm I thought it had a larger cargo area šŸ¤” My mistake
    1
  7694. I charge them $40/per can
    1
  7695. Yes I store it in 55gal drums and then have them pumped out when theyā€™re full
    1
  7696. šŸ¤£
    1
  7697. Yes it will
    1
  7698. He sold them to me šŸ˜
    1
  7699. I want to make fun of the new press secretary, especially for her DUI that ws swept under the runā€¦.but Iā€™m afraid Iā€™ll get the ā€œclintonā€ dirt bath treatment
    1
  7700. Those are really good ones, lube locker it is!
    1
  7701. just baiting for the next vid šŸ˜ˆ
    1
  7702. But I am simple minded and juvenile, are you new here? šŸ˜‚šŸ¤£
    1
  7703. Heā€™ll be fine šŸ˜‚šŸ˜‚šŸ˜‚
    1
  7704. I see what youā€™re doing thereā€¦šŸ˜‰
    1
  7705. I wanted to, but didn't take much time to edit this one
    1
  7706. šŸ™„
    1
  7707. RElax...its ok
    1
  7708. I moved a 19,000 excavator with it once. That was a little scary. It was way overloaded but we didnā€™t take it in public roads
    1
  7709. People from China told me that they do not have those there. They build them for export
    1
  7710. Youā€™re stupid
    1
  7711. Oh yea. It happens sometimes. I had a 2019 Sierra 1500 the kept losing data communication between modules. It would only happen for a split second according to the owner. Several modules had a "U" code stored. "U" codes involve CAN, high speed, low speed networks and GM's LIN. The observable symptoms were a radio that would turn off, and the AC blower would stop. But in randomly and only for a split second. I spend DAYS looking for a problem. Eventually I located a poor connection at a pin in a module connector. I was thrilled to finally find it. I could even recreate the symptom my wiggling the pin. I pulled the pin and replaced it. Three days later the driver called back and said it did it again. I was working at a dealer at the time and the repair was paid for by GM. I never saw the truck again because I left the dealer before I could keep looking for the customers problem. It will always be the one that got away!
    1
  7712. Nice vocab word of the day! Iā€™ve actually encourage others to do such things but nobody seems to take interest in it
    1
  7713. Everything is discontinued and no longer exists
    1
  7714. We went through this earlier. No one is making fun here. You're taking it wrong, I'm not like that
    1
  7715. It can come from the nose
    1
  7716. Oh itā€™s not like that. Weā€™re reaching a resolution on the matter through constructive conversation
    1
  7717. Apollo 13! Youā€™re the first to mention that scene šŸ˜ šŸ‘
    1
  7718. Theyā€™re hanging over my 3rd toolbox. I use them when the situation warrants
    1
  7719. Seriously šŸ˜’
    1
  7720. Ā @tayl0124Ā  Iā€™m always tying new things, thought it was classy
    1
  7721. no
    1
  7722. Much thanks to you for the kind compliment!!! šŸ˜Š
    1
  7723. Ā @HueToobBlowsĀ  itā€™s possible šŸ¤·ā€ā™‚ļø
    1
  7724. I donā€™t think Richard likes me too much. He came in trolling about a year ago.
    1
  7725. Iā€™m going to replace all of those control arms, and the shocks soon. Parts are a over a week awayā€¦.I find that odd. But ya know, 2021 and all
    1
  7726. šŸ¤£šŸ¤£
    1
  7727. Welcome to the party!!
    1
  7728. Nope, itā€™ll cut through the rubber with the adapters, in all probability. I think you should just replace the whole spring pack. Theyā€™re not overly expensive. Check the interwebs there are plenty of replacements out there for just over $100 per side. That tool will cost you 80 plus the cost of new bushings, so youā€™re already half way there. Iā€™d suggest replacing the 4 big U bolts and the spring hangers too. Now you have a nice rear suspension and never have to worry about it again!
    1
  7729. Fixing it in a few days. Parts are super delayedā€¦2021 ig
    1
  7730. Please do! Also, Use some large channel lock pliers to compress the steering linkage at the bell and socket joints, if they move, theyā€™re worn and should be replaced.
    1
  7731. Not much to see. Just an evap system leak.
    1
  7732. Thereā€™s no suckers on my client list. As Iā€™m sure you have gathered by now, that the impeller is made of steel. The steel was rusty, itā€™s so rusty that it has dissolved into liquid. The steel that may or may not be liquid happens to heavier than the coolant. IF there are chunks of impeller blade in the engine, theyā€™re sitting at the bottom of a cooling jacket and will never come out. Not going to be a problem at all. Iā€™ve tried to buy this car a couple of times from the owner, heā€™s keeping itšŸ™ƒā€¦. If it was a junk motor I wouldnā€™t have interest in it.
    1
  7733. šŸ˜³
    1
  7734. The YT AI has been doing some very weird things all year long so far
    1
  7735. Do de doo!!!!
    1
  7736. Nawwwww I donā€™t scratch things
    1
  7737. https://youtu.be/0V5AMMQJ2z4
    1
  7738. Oohhh no! Sry youā€™re laid up! I wish you well!
    1
  7739. Sarasota
    1
  7740. lol I really liked it and the creator let me use it
    1
  7741. Dollar bill over the tailpipe šŸ˜
    1
  7742. Weā€ll fix that last, we need to make it run first.
    1
  7743. Flood policy is what comes into play here. Home owners usually wonā€™t touch storm damage.
    1
  7744. Thx Doc, everything is fixed now
    1
  7745. šŸŒˆšŸŒˆšŸŒˆ ooh stop it šŸŒˆšŸŒˆšŸŒˆ
    1
  7746. Johnā€™s pass in St.Pete? Iā€™m about 40 miles south of Johnā€™s pass on the south side of Tampa bay
    1
  7747. Trailer battery is full every time I check it.
    1
  7748. Been doing this for 20 years, I know what happens and what doesnā€™t happen. Wiping off the pump guns wonā€™t happen
    1
  7749. Iā€™m sry to hear that she passed šŸ«‚
    1
  7750. Cat 3s donā€™t move geographical features like entire sections of landmasses, it was a 4 as soon at it spun up.
    1
  7751. I got jokesā€¦. Itā€™s bot really a good time for massive drinking. The beer on beach part was true tho šŸ˜‰
    1
  7752. Give me a few more years and Iā€™ll fix that mess too šŸ˜‰ā€¦.seriously
    1
  7753. Do it! Book the trip for next year! Just do it! Iā€™ll see you in 23!
    1
  7754. šŸ˜³ what is it?
    1
  7755. It all in good fun dudeā€¦
    1
  7756. Itā€™s billion trillion gazillionā€˜s bro get it right. šŸ¤¦ā€ā™‚ļø
    1
  7757. Do it!!
    1
  7758. Ā @chrisbailey5055Ā  Hahaha not my scene
    1
  7759. šŸ˜³
    1
  7760. Next week, Iā€™m moving into the shop!! As some as SEMA is over.
    1
  7761. Im not being paid a dime
    1
  7762. Thereā€™s a lot of comments sometimes! I try!
    1
  7763. I had two cans!
    1
  7764. It was crazy out here! So much to take in!
    1
  7765. I have almost 0 stress right nowā€¦next week when itā€™s time to move into the shop may be a different story, but weā€™ll cross that bridge when we get there šŸ‘
    1
  7766. Not bringing my kids to Vegas
    1
  7767. Going to need more context on this one ā˜ļø
    1
  7768. It happens on occasion šŸ˜
    1
  7769. Who says Iā€™m unarmed? Florida man here
    1
  7770. šŸ˜³ what is it??
    1
  7771. mansplaning?
    1
  7772. Ā @myronsherman8571Ā  I did a 4k closeup of the valve leaking
    1
  7773. I am a robot
    1
  7774. 1326
    1
  7775. ā€œWife Unitā€ is her new channel
    1
  7776. The ones I want are stupid $$$$ . I like the deer and CAT machine best. 50k+ for a used one. If I find someone to split cost I would consider it again
    1
  7777. Later
    1
  7778. I know! Felt like I was canceled or something
    1
  7779. Iā€™m expanding
    1
  7780. I got em
    1
  7781. Yea i know itā€™s an Acronymā€¦.. that turned into a personality
    1
  7782. Itā€™s coming, lots to edit
    1
  7783. Ya never know. Weā€™re techs never get the full story.
    1
  7784. Thatā€™s how you know it was made it China. ā€œProfessional axle, best No1 Goodā€
    1
  7785. Thatā€™s ok the ABS magnet is in the bearing not on the axle
    1
  7786. We do not lubricate fasteners in automotive. All of our torque specs assume that lube is not present. In some cases, such as wheel lugs the manual specifically forbids the use of lube. Adding lube will reduce thread friction and cause excessive clamping force at the fastener area
    1
  7787. Super did
    1
  7788. Good call George. I actually ended up replacing the FR bearing. It wasnā€™t loose, but made loads of noise while driving
    1
  7789. AvE is amazing, truly an inspiration in my life
    1
  7790. You must be new here
    1
  7791. Ā @bryonsteik7435Ā  Yea I did that on a Mazda later that day šŸ¤£šŸ¤£
    1
  7792. Itā€™s just not for me
    1
  7793. šŸ¤£šŸ¤™
    1
  7794. Iā€™m looking at a set from an avalanche
    1
  7795. Seats will be the next phase
    1
  7796. Projects are never done šŸ™ƒ
    1
  7797. I pulled itā€™s input from an output on the door speaker
    1
  7798. The avalanche version might have one. Iā€™ll have to visit the junkyardā€¦.I canā€™t find one online so far
    1
  7799. Itā€™s in the realm, but not over the edge yet. šŸ˜‰
    1
  7800. Just search around on eBay. Theyā€™re usually limited productions that 3d printer people make
    1
  7801. Iā€™ll focus on the seats later l, Iā€™m looking at a set of avalanche seats in a lighter color
    1
  7802. Ā @johnathansmith9059Ā  So so true
    1
  7803. I'll work on that. Thanks for the feedback!
    1
  7804. Awesome. I'm glad you're here. Thanks for watching!
    1
  7805. Ā @sweettooth7124Ā  No worries, I just found your vids. I'll watch em tomorrow... need sleep. āœŒļø
    1
  7806. Hey post the link, I'd like to see. And thanks for the compliment! And for watching.
    1
  7807. Thank you! I have corrected it! šŸ¤™
    1
  7808. Coincidence? I think not!
    1
  7809. šŸ¤¢yess
    1
  7810. Itā€™s being edited now
    1
  7811. The guy just said he found it like that. No explanation regarding the second box (Iā€™m 99% sure it was loose nuts on the terminals)
    1
  7812. They threw me into pub-lick!
    1
  7813. sure do!
    1
  7814. Iā€™m prejudiced against people named Steven from CaliforniašŸ¤£šŸ¤£šŸ¤£šŸ¤£ Hahahah Jk ā€¦ first thing that came to mind I guess
    1
  7815. Thatā€™s going to be hilarious
    1
  7816. Right!!!
    1
  7817. Theyā€™re worth it to me, ridgid doesnā€™t have the as many tools as Milwaukee that use the same batteries to have had to cross over into the Red tools. I still use my rigid stuff as well. Both have their place in my tool box
    1
  7818. Because I wouldnā€™t know how the new one would go in.
    1
  7819. Out of practice šŸ™ƒ
    1
  7820. Beer also works wonders if youā€™re driving through mud holes and you run out of washer fluid
    1
  7821. Why are we going to court?
    1
  7822. Not my forklift and not a rental. I didnā€™t want to risk hurting it
    1
  7823. Cliff is an electrician
    1
  7824. Ohhh weā€™re feeling the pain of the labor today!!
    1
  7825. šŸ’ÆšŸ‘†
    1
  7826. Yup sure can
    1
  7827. Itā€™s not a rental, itā€™s not mine, but Iā€™m considering taking over the payments. The owner is thinking of moving and canā€™t take it with. Iā€™m doing the services on it as payment for use of the machine till everyone decides what to do. I might buy it if he decides to move and let it go. I have some land and itā€™s a very useful machine for land management.
    1
  7828. This week for sure! šŸ‘šŸ‘šŸ‘
    1
  7829. I heard they were doing that
    1
  7830. Iā€™m not sellingā€¦ but if you want oneā€¦ jm3oilfilterwrench.com
    1
  7831. Use the wrench with the cammed adjuster that auto sizes to grip the filter
    1
  7832. I did after, just didnā€™t include that part.
    1
  7833. Shhhhh, if an engineer sees this comment.....
    1
  7834. Iā€™m waitingā€¦. I see your busy trolling my other videos but you donā€™t seem to have the vocabulary to articulate youā€™re accusations.
    1
  7835. Ā @robertbradley8694Ā  I think youā€™re funny. Care to explain how I ripped someone off?
    1
  7836. šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚ have a great day!
    1
  7837. šŸ˜†
    1
  7838. Shhhhh
    1
  7839. Just 250
    1
  7840. Iā€™ve been going in later, trying a schedule shift. Doesnā€™t help that isnt dark at 5:45 right now.
    1
  7841. They towed it away, I made a follow up(see description for link) I intended to do it outside, it doesnā€™t fit in the shop. My plan was to set up a tent to work under.
    1
  7842. My smell is still tainted the rona. It comes and goes
    1
  7843. The camera ws mounted. Needed the jack to hold the strut so I could start the nut šŸ˜‰
    1
  7844. It takes 4-6 days for approval from aftermarket warranty. AND they already denied strut replacement.
    1
  7845. Because society restricts people based on the lowest common denominator at the expense of the rest of the population. Similar to how 96%of the world has to cater to the emotions of the remaining 4% (this should trigger a few snowflakes)
    1
  7846. Iā€™ll take it for what itā€™s worth
    1
  7847. Aftermarket warranty šŸ¤·ā€ā™‚ļø
    1
  7848. Saying that to me blows my mind! AvE is a legend!
    1
  7849. Links in description
    1
  7850. The owner asked for the reseal
    1
  7851. But I didnā€™t not install them
    1
  7852. Theyā€™re worth the bucks, these things donā€™t mess around. When i found them I didnā€™t know they were made by bacho, And I bought the Snap On branded version. I paid too much šŸ˜”
    1
  7853. Iā€™m very efficient šŸ˜‰
    1
  7854. You missed the part where I said that I was upset regarding the order of operations. Had I been made aware that they intended to have the compressor replaced, I works have donā€™t that first before running the engine and heat soaking everything. Pt 1
    1
  7855. Slow day
    1
  7856. Woooo saaaaaa!
    1
  7857. I really should check it firstā€¦ bad habit
    1
  7858. rainmanappointments @gmail .com
    1
  7859. I have a Panasonic GH5ii and Iā€™m trying to get away from the GoPro. Problem is Iā€™m donā€™t know how to use it very wellā€¦. Itā€™ll take some practice to get it right
    1
  7860. Itā€™s had mixed results over the past year. Some folks liked the drama of the retail shop and I NEED to kept drama away
    1
  7861. Iā€™ve never been clinically evaluated šŸ˜‚
    1
  7862. Guttentag!!
    1
  7863. The shop is one company and I treat it independently from YouTube activities. With the exception of filming I donā€™t do any internet work during normal hours so I can focus on the business. To better answer your question the shops expenses are low and I didnā€™t have an enormous front load expense as I have been collecting equipment for years. Still, margins are tight but in the black.
    1
  7864. Why you so mad bro?
    1
  7865. Thatā€™s my evidence, if I pulled the pan itā€™s now tainted evidence.
    1
  7866. Itā€™s not that hard to figure out. Thereā€™s only two Nissan dealers in my town and itā€™s not the one next to me. Iā€™m not trying to get sued by a major corporation or dealership chain. Just because Iā€™m correct doesnā€™t mean they canā€™t file a defamation suit. Lawyers cost $350-$500 an hour and I donā€™t feel like wasting $50000 so folks can leave bad yelp reviews.
    1
  7867. Ā @ChupaAĀ  where ya been šŸ¤·ā€ā™‚ļø
    1
  7868. Welcome to the party! šŸŽ‰
    1
  7869. Amsoil is one of the best oil products made
    1
  7870. Good ones donā€™t
    1
  7871. Says who?
    1
  7872. Only if Iā€™m committing slander or liable. Iā€™m not doing that per the definition of the law
    1
  7873. Good eyeā€¦& nope
    1
  7874. Thereā€™s a lot of factors at play on this one
    1
  7875. All I receive from BG is a bill for the product that I buy from them
    1
  7876. Found it at a flea market
    1
  7877. Nope, the crankcase cleaner only gets to the oil system
    1
  7878. šŸ«”
    1
  7879. Sry my guy! Iā€™m out of town. This week šŸ¤·ā€ā™‚ļø
    1
  7880. I confessā€¦itā€™s filler content bc Iā€™m out of town this week
    1
  7881. FYI Lucas oil stabilizer has zero detergent or additives, itā€™s use actually dilutes your oils additive making it less effective
    1
  7882. ARod is the expert on the diesel additives for a couple reasons. Heā€™s in a cold climate so the additives are utilized much more in his area, and heā€™s used to the CP4s as he works on them daily. Lubricity is the key to keeping that cp4 alive IF you donā€™t want to swap it out for the DCR pump which doesnā€™t fail and destroy the fuel injectors
    1
  7883. šŸ‘‹
    1
  7884. Itā€™s laundry day šŸ¤£šŸ¤£
    1
  7885. Thatā€™s cheating šŸ¤£šŸ¤£
    1
  7886. The video shows exactly the opposite of what you said
    1
  7887. Weā€™re going to check it again after I can put some miles on it. Iā€™ll do more vids on this truck
    1
  7888. I do what I want šŸ¤£šŸ¤£šŸ¤£
    1
  7889. Those are the folks who make them. Itā€™s all petroleum distillates.
    1
  7890. And now weā€™re paying for it
    1
  7891. They're actually a tan color IRL and they don't fit the color scheme. I'll rewrap them in dark grey i think
    1
  7892. Yes
    1
  7893. I ended up getting a Renogy 4D AGM. And I got the AGM because the truck batteries are also AGM and I didnt want to mix battery types. If the 4D doesn't work out I'll upgrade to the LiFe battery and use the AGM for something else
    1
  7894. bonus feature!
    1
  7895. responding, yes indeed in know
    1
  7896. Itā€™s for sale during the apocalypse. Will trade.
    1
  7897. The amp clamp setup is an add on and it used the mV setting on the meter to display current. I should have mentioned that in the video
    1
  7898. Buying plutonium might put me on a list
    1
  7899. šŸ‘‹
    1
  7900. šŸ¤£
    1
  7901. Iā€™m a professional child
    1
  7902. šŸ™„
    1
  7903. Yes I do, kids are germ factories šŸ­
    1
  7904. Ohhh nooo!!
    1
  7905. The Bahco and Snap On are the exact same things due to the concept of rebranding. I wish I knew that before I bought the Snap On wrench, both of them
    1
  7906. I humble except your compliments! šŸ˜
    1
  7907. Bc this one was really really good! šŸ˜†
    1
  7908. Hahah then I could say ā€œanti-gravity@ šŸ˜
    1
  7909. LOL NOPE!
    1
  7910. check pinned comment
    1
  7911. See pinned comment
    1
  7912. You missed the pinned comment
    1
  7913. Check pinned comment
    1
  7914. I saw ur vid on the with the build quality issues regarding connectors and harness routingā€¦ itā€™s not just Ford. I saw it left and right when I was at the GMC dealer. $80,000 trucks built like a pinto SMH
    1
  7915. It wasnā€™t the cap, it was the removed actuator solenoid. I donā€™t need a vacuum full of rat poop.
    1
  7916. Yea itā€™s like $200 after taxes fees etc. refrigerant is expensive now
    1
  7917. Right handed
    1
  7918. Thatā€™s because itā€™s live action! No tripods here šŸ¤™šŸ˜Ž
    1
  7919. Yea I sucked the oil through the dipstick tube with a mighty vac
    1
  7920. Sry I have to Sacrifice some things I canā€™t make three hour videos
    1
  7921. I skipped it, it was anticlimactic.
    1
  7922. šŸ˜ŽšŸ‡ŗšŸ‡øšŸ‘‹šŸ‘‹šŸ‘‹
    1
  7923. Yea it did! I knowā€¦I forgot to remember that oops
    1
  7924. Yea it did!
    1
  7925. it's in the 50-60s right now
    1
  7926. By smacking the glass with the ratchet. I broke a Volkswagen windshield once that way. It cost us $1100
    1
  7927. Yea they didnā€™t want to buy one šŸ¤·ā€ā™‚ļø
    1
  7928. šŸ˜
    1
  7929. He quit a couple weeks agoā€¦had other priorities
    1
  7930. šŸ˜
    1
  7931. šŸ˜
    1
  7932. šŸ¤«
    1
  7933. yea thats broken too
    1
  7934. No oxygen no fire. And thereā€™s no sparking, crimp or no crimp the connection is solid
    1
  7935. I see youā€™re chipping in constructively to bridge the gap and help unify the people! Good move šŸ‘
    1
  7936. šŸ˜
    1
  7937. I buy the blue water jugs from Tractor Supply, they have a regular old style flexible spout, the plastic and molding of the container is the exact same, they even say gasoline on them but theyā€™re blue instead of red
    1
  7938. Oh yea itā€™s a thing up in the great white north
    1
  7939. kinda
    1
  7940. I happen to have an "Everything is a Hammer" t shirt :)
    1
  7941. I do it for the kids
    1
  7942. Everyone should work food service for a couple of years, one will learn a lot about the world and the people it
    1
  7943. yea that doesn't work either, theres a few kinks to work out of this one
    1
  7944. hey I didn't go full Joe Rogan on this one lol
    1
  7945. Having owned several boats big and small this statement is 1000% true! 1st and last days are the best
    1
  7946. I have a couple tables but theyā€™re in use with entire engine thatā€™s disassembled on them
    1
  7947. Youā€™re not kidding, we drove thru The SoCal desert once, it was triple digits all day and even hotter on the highway
    1
  7948. šŸ˜
    1
  7949. She got a blurr because weā€™re not here to stare at her shortsā€¦. Mine šŸ¤£šŸ¤£šŸ¤£
    1
  7950. mine LOL
    1
  7951. Ordered!!!
    1
  7952. You get em' from Ca, we're getting them from NY
    1
  7953. Didn't mean to do that to you!
    1
  7954. Get the blue water jugs from Tractor Supply. It's the exact same product but with a flexible spout with no EPA valve on it
    1
  7955. It's a company called Mosaic that does it. (and the EPA looks the other way) $$$$$$$$$$$$$$$ Kinda like PG&E
    1
  7956. Well I didnā€™t realize it at the time that the camera angle was provoking the imagination
    1
  7957. I guess we'll see
    1
  7958. aaahh we're good, that old gas was never going to light off
    1
  7959. whaaat?? To me?? naww I'm med free
    1
  7960. Pasco...y'all are crazy LOL
    1
  7961. It spends some time off-road. I found lots of dirt and grass under there.
    1
  7962. That's exactly why I put the time in to figure out the cause of the vibration. Yea it needed rotors too btw.
    1
  7963. No problem there. GM alternators now run a duty cycle commanded by the ECM. They can reduce output all the way down to 11.6v (I think it's that low) as long as they battery has good health and electrical load it's low. It's a super fancy and expensive way to save a little fuel.
    1
  7964. Lol" trying to get scammed " love it. šŸ¤£
    1
  7965. Never hurts to shop around. However, one shops parts source isn't the same as the next. You want generic white box cheap junk, or Moog parts? One cost $19 the other cost $89 there's a difference.
    1
  7966. South Florida, Bro
    1
  7967. I found play in the pittman arm idler arm, and inner & outer tie rods. The truck spent some time off road. I found grass under there.
    1
  7968. You're not wrong.
    1
  7969. No can do..If I attempted an alignment, (that would never be right due to the sloppy parts) I'm married to it and it wouldn't have fixed the problem.
    1
  7970. Naaw , he'll take it to a tire shop or something, and it'll get a toe and go...$89
    1
  7971. Lol that was misleading. Those busses are in storage at a mall parking lot. Edit: Also next to the police station.
    1
  7972. I don't use win toe. I just read the specs and pull the measurements. Been doing alignments since before win toe was released. I can read the measurements screen like Keanu Reeves reads the Martix.
    1
  7973. I only saw the one hole
    1
  7974. 1.2%
    1
  7975. Love that story!!
    1
  7976. It turns peoples screens to full brightness
    1
  7977. Follow me on Twitter @RainmanRay4realā€¦ I have no prizes for you. Is this a bot or is it 4realz????
    1
  7978. I dunno what you mean? R u saying that I dismissed it as a non-problem?
    1
  7979. I'll do a longer video next time.
    1
  7980. So maybe like half a live
    1
  7981. I was in the chat
    1
  7982. Iā€™ve heard of it, and never tired It before. I think itā€™s an old farm trick from a time before PB blaster
    1
  7983. šŸ¤™
    1
  7984. I mentioned that I forgot to mention it (at the end) . During my mentioning, I mentioned that I eventually mentioned it.
    1
  7985. Hehehe they don't know I'm here
    1
  7986. Thx DS!
    1
  7987. TY JOJO! Much ā¤ļø!
    1
  7988. You may in the wrong place šŸ˜‰
    1
  7989. I did šŸ˜„
    1
  7990. Donā€™t want to over do it
    1
  7991. Ā @loveofchrist5808Ā  what in your mind?
    1
  7992. Wooooo!
    1
  7993. It was tight, I had only run the threads in. I routinely thread all of the bolts first, then apply torque
    1
  7994. no
    1
  7995. Because oil soaked hands leeches heavy metals into the blood and kills us
    1
  7996. That stuff costs $$. Customerā€™s donā€™t spend $ on old cars unless they the must
    1
  7997. Not building race engines here. This was an attempt to save an engine. Plastigauge or not, this thing was never going to get a conn rod, or have a heads removed to replace it. Weā€™re talking about a $1000 repair, on a $1000 car here. Owned by a kid that doesnā€™t have $50 to pay for oil changes.
    1
  7998. It was six more hours to get the block skirt off. We just werenā€™t going to go that deep. Just too much $$
    1
  7999. I think it was around 6ish
    1
  8000. No I got it. Someone was talking to me and I had to cut the scene
    1
  8001. Lol. Nothing escapes the all seeing eye of the inter-webs.
    1
  8002. Oh yea I got ā€˜em
    1
  8003. No mains, the block skirt was the main caps and needed like 8 more hours to remove. This was a very tight budgeted repair
    1
  8004. Iā€™m totally condescending and sophisticated šŸ¤£ā€¦must be my inner libertarian leaking out. Itā€™s not deliberate or intentional. Iā€™m aware that I naturally rub some people the wrong way
    1
  8005. Hehehe thatā€™s the best part, itā€™s now an inside joke for the rest of us
    1
  8006. When the big pin in the the differential carrier, the axles canā€™t move back toward the center
    1
  8007. CARB is no joke
    1
  8008. āœ‹
    1
  8009. Maybe one day
    1
  8010. Ā @danmadison5087Ā  šŸ¤£
    1
  8011. Did you just call me Gen z ?
    1
  8012. Pedal monster!!! Best bang for the buck!
    1
  8013. TBD
    1
  8014. Did I miss something?
    1
  8015. Should I trade it in?
    1
  8016. Everythingā€™s ok I took all necessary precautions to ensure safety and accuracy
    1
  8017. Glad youā€™re backā€¦Iā€™m super busy these days
    1
  8018. Oohhh noooo
    1
  8019. šŸ˜‰ gotcha
    1
  8020. šŸ˜
    1
  8021. šŸ˜‰
    1
  8022. I like to think Iā€™m adding to the world
    1
  8023. Had P0300 (no help) P0301 P0306. Cylinder 1 was a dead hole, 6 fired sometimes, and the others had ransoms. Five was fine. Bank 1 was rich and bank 2 ran lean.
    1
  8024. You got it. Direct injection 4.3l six banger. ( With cylinder cancelling AFM)
    1
  8025. Thereā€™s always an exception, this was it
    1
  8026. Really?? Silly AI
    1
  8027. Much appreciated TY!
    1
  8028. It was two, I had a live on my off duty channel šŸ˜‰
    1
  8029. Itā€™s not made for ā€œshearā€ load (left and right forces) and it would ultimately break off
    1
  8030. Breatheā€¦. šŸ§˜
    1
  8031. Ā @gerrynightingale9045Ā  You speak with conviction and mean what you say. Iā€™m sure you donā€™t leave much room for sorry. I admire that. You have balls! I understand your plight. I can offer no words to remedy, although I desire to. For what itā€™s worth, I do wish you the best friend.
    1
  8032. Ā @gerrynightingale9045Ā  Oh she was told about everything that I found. It wasnā€™t the dealer that did the cooling system work, I read her receipts. She owned it for several years but. Never complained about overheating or recent repairs. The whole situation didnā€™t make any sense to me. I speculate that the husband did the work and she didnā€™t realize. (If she truly didnā€™t know then she couldnā€™t say). PS sry youā€™ve been pissed for a few years.
    1
  8033. You sound really upset.
    1
  8034. Ā @shawnl5634Ā  Iā€™m sorry I donā€™t understand what that even means šŸ¤Ø
    1
  8035. It was ok, I heard no lifter noises aaand the oil pressure switches are known to be failure prone
    1
  8036. Ā @BobRobbo6Ā  the cool part is, if you find that wrenching isnā€™t for you, you walk away with a new skill and some tools that youā€™ll have your while life. Plus you could always become a service advisor. They make bank too.
    1
  8037. Thatā€™s all we do is learn! Never stop learning. And yes itā€™s worth it, weā€™re in very high demand, the party is good once you become good at your job.
    1
  8038. Thatā€™s right. I brought their car into the shop and found all that. And yes I can use electric tools on clamps
    1
  8039. Thatā€™s the vent hose, if too much pressure builds up, the cap will release it and Vapor will exit through the little hose
    1
  8040. Ok
    1
  8041. Ā @coreyfairbanks7374Ā  not cool, the wheel bearing halves will cover apart without the axle not installed. No more driving to fixed! Be careful
    1
  8042. Not to my knowledge
    1
  8043. Trinkets made out of plam tree fronds. I donā€™t get it either
    1
  8044. I have little kids, I can block out anything
    1
  8045. If you think thatā€™s bad, you should see my welds!
    1
  8046. Yea I didnā€™t pull back enough wire, then I did. I know Iā€™m not very good at soldering. Iā€™m working on it. Practice right? If you think thatā€™s bad, You should see my welds! šŸ¤£āœŒļø
    1
  8047. I had lots of coffee
    1
  8048. Because itā€™s a really nice one.
    1
  8049. Silly me! I fixed it
    1
  8050. Itā€™s a floppy\flexible mount
    1
  8051. Nope, I did at first bc there was a bracket that it threads into, and I wasnā€™t ready to mount the bracket when I filmed in that particular moment
    1
  8052. Lol no Iā€™m out of townā€¦uploads are hard, no internet this week
    1
  8053. Nope! I like mine Iā€™ll drive it it no longer functions
    1
  8054. You should see a ford 6.7! Itā€™s like Where Waldo
    1
  8055. Pedal Monster should work in the Kia šŸ˜‰
    1
  8056. The idea is to remove/reduce restrictions wherever possible, then overall airflow can improve. A 2 1/2ā€ outlet with a 2 1/2ā€ pipe will be more restrictive than an outlet with a larger pipe. Think of cylinder head valves. Letā€™s say a valve is 1.2ā€ in diameter, it will have a 2ā€ port
    1
  8057. I do šŸ˜‰
    1
  8058. No this one was stubborn
    1
  8059. Better call Saul!!!ā¤ļø
    1
  8060. šŸ˜
    1
  8061. Thatā€™s too much editing
    1
  8062. He has his own tools
    1
  8063. We focus too hard on color not realizing itā€™s the same thing. Comment is not about coolant
    1
  8064. Changing locations to quickly rule out a failed relay
    1
  8065. Thatā€™s a nice van for its age
    1
  8066. Chicken gizzards are the best!
    1
  8067. Didnā€™t wet drop those bombs after they betrayed peace talks and raided Pearl Harbor with an armada and over 300 dive bombers? Nothing against the Japanese, it was before my time, be we have to include the details.
    1
  8068. Itā€™s fine
    1
  8069. Ā @t0rnado695Ā  It always starts with an idea šŸ’”
    1
  8070. They were here first
    1
  8071. I fixed it
    1
  8072. Good friend of mine. Check him out @CPā€™s Garage
    1
  8073. It was windy out and around 55
    1
  8074. Stop it! šŸ¤£
    1
  8075. šŸ˜
    1
  8076. Ā @HONDATECH93Ā  awww no offense taken or sarcasm detected. I picked a fight and dug in deep. It really was my big mouth and I have no regrets šŸ˜Ž
    1
  8077. No I got fired for my big mouth
    1
  8078. 4 wheel electric drums
    1
  8079. lol
    1
  8080. Yes they do! my father in law gets a kick out of it
    1
  8081. Glad you're here!
    1
  8082. Im set in my ways
    1
  8083. šŸ¤£
    1
  8084. Its an ā€œImport Directā€ brand, they tend to have good parts so far. Iā€™ve been using them for a couple of months now
    1
  8085. Perhaps at first glance šŸ˜ˆ yet doesnā€™t make the definition entirety lol
    1
  8086. Whuuuuttt!? I had no ideaā€¦thx
    1
  8087. 3/8 I prefer the smaller drive size
    1
  8088. Brilliant isnā€™t it! šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  8089. This is the way
    1
  8090. $20? Ha! Those green ones that I welded were $65. They stopped being $20 in the early 2000s
    1
  8091. Well @fordbossme is on vacation so someone had to light up a troll today šŸ¤£
    1
  8092. Havenā€™t needed any brake clean šŸ¤·ā€ā™‚ļø. Itā€™s comingā€¦.
    1
  8093. Well only one thing I can sayā€¦šŸ˜˜
    1
  8094. We like Ron! šŸ˜‰
    1
  8095. Maybe when I grow up šŸ¤£šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  8096. It all went sound after the Chrysler GM bailouts. Ford slacked off after and the post 2020 builds are a whole new level of junk
    1
  8097. SKYNET is real!
    1
  8098. EXACTLY good sir!
    1
  8099. Cody and I had a chat about needing an obd breakout box, it would have made things go faster
    1
  8100. Yea theyā€™re fine, I put in a set of 30%over injectors that can flow more than stock from S&S Diesel. The DL units were a stock replacement
    1
  8101. I donā€™t think I noticed either šŸ˜³
    1
  8102. Oh god no! A BM from the rust belt! šŸ„ŗ
    1
  8103. šŸ˜‰šŸ¤£šŸ¤£
    1
  8104. Sure, but where's the fun in that LOL
    1
  8105. I knew Iā€™d hear about that air hammer šŸ˜
    1
  8106. No itā€™s not his Lotus
    1
  8107. OMG is so bad
    1
  8108. Itā€™s a coping mechanism. My demeanor doesnā€™t show it often, but Iā€™m under a considerable amount of stress. Do de doos and other shenanigans really helps to get through the grind
    1
  8109. I didnā€™t say it was the rule. I said they got 3 options, change just the misfiring coil, add spark plugs, add 3 more coils
    1
  8110. Hi Roger!
    1
  8111. No not me. Link? I want to see
    1
  8112. I have replaced a single failed coil before, and had another fail literally an hour later
    1
  8113. I donā€™t record customers, besides most of the conversations taker place via phone or email bc folks drop off their car. I suppose someone could like about a recommendation, but I dunno what they would expect to gain. We document everything in writing (not to mention electronic communication is always logged) and I always clearly communicate the causes, and correction needed.
    1
  8114. Livin on the edge šŸ˜
    1
  8115. šŸ¤™
    1
  8116. All of that is industry standardā€¦ or Iā€™m a hypocriteā€¦ or both šŸ˜†
    1
  8117. Maybe maybe not, depends on location and size of the leak
    1
  8118. Adhesion!!!! You got it! TY
    1
  8119. Itā€™s built into the condenser (that little tank on the end)
    1
  8120. Itā€™s UV dye
    1
  8121. šŸ¤«
    1
  8122. Cost
    1
  8123. No it wasnā€™t that bad. Iā€™ve agreed with the bosses not to discuss prices, it has potential to lead to issues for my and the company
    1
  8124. Happens all the time
    1
  8125. Surface adhesionā€¦Iā€™ve learned a new word
    1
  8126. Iā€™ve heard of you before, I didnā€™t realize you were in Srq/btown!
    1
  8127. Thank you! Iā€™m excited to get back home and get the shop set up. (Took an opportunity to attend SEMA) We should meet up later. šŸ˜ŽāœŒļø
    1
  8128. He will come for you for posting this comment! šŸ¤£
    1
  8129. Will do soon
    1
  8130. šŸ˜³
    1
  8131. Ā @jefferybye2169Ā  wow Jeff youā€™re really upset at the things that I do that have nothing to do with you. Iā€™m starting to think I know you in real life. If not thanks for the clicks anyway.
    1
  8132. I know right! Another independent businessā€¦.šŸ™„ By the way, Iā€™ll take fries with that, and an apple pie.
    1
  8133. Good eye
    1
  8134. šŸ¤£šŸ¤£šŸ¤£
    1
  8135. šŸ‘€
    1
  8136. Eric O may not appreciate that šŸ¤£šŸ¤£
    1
  8137. Saw it in 15. Magnificent structure!!
    1
  8138. Just referring to the head shaving breakdown thing
    1
  8139. šŸ¤£šŸ¤£šŸ¤£ brilliant
    1
  8140. šŸ‘€
    1
  8141. A filter with low flow still makes pressure in the other end, plus I think they have a bypass valve in the filter
    1
  8142. Thatā€™s one good battery to get 7 mil cranks out of it šŸ˜‚
    1
  8143. lol. I have 6. Not building airplanes so every nut/bolt doesnā€™t need an actual click
    1
  8144. Youā€™re right
    1
  8145. Customer can, I canā€™t
    1
  8146. I was like šŸ˜¢ā€¦. Why???
    1
  8147. šŸ˜‰
    1
  8148. šŸ˜³
    1
  8149. I own a pole barn structure that Iā€™m turning into a shop (for projects, not commercial)
    1
  8150. But it wasnā€™t working
    1
  8151. We are going to NEED that truck tomorrow
    1
  8152. Itā€™s badā€¦really bad
    1
  8153. i'll survive haha
    1
  8154. thx
    1
  8155. Its moving away now...i think is pretty bad out there. Daylight will bring a new landscape
    1
  8156. We'll have roads to clear
    1
  8157. It was abandoned during a wind event and we cant move it
    1
  8158. It's really not the time for the political BS. People Died today
    1
  8159. Ā @stevenwalters8557Ā  tomorrow is going to suck šŸ˜ž
    1
  8160. So sorry brother! It's a bad one
    1
  8161. Just waiting it out. House is holding together.
    1
  8162. All good, I only go out if i NEED to. And tomorrow we NEED that truck
    1
  8163. LOL it's all i have
    1
  8164. Iā€™m sure Iā€™ll chat with the adjusters
    1
  8165. Lol maybe theyā€™ll see this and try to recruit me
    1
  8166. Yay! šŸ‘šŸ‘
    1
  8167. No itā€™s next door being painted
    1
  8168. It can kill you LOL
    1
  8169. Oh Iā€™m not mad at the can, or anything. Did you ever see the movie Thor? ā€œAnother!ā€
    1
  8170. I wouldnā€™t think so, used oil has loads of different contaminates. Metal, silica , dirt, brake clean, itā€™s mixed with countless other oils including ATF and power steering sometimes coolant. It prolly gets distilled out or separated somehow just like everything else
    1
  8171. Reloading in progress. I seem to be collecting Jeeps to build šŸ¤£ Better than PT cruisers!
    1
  8172. šŸ‘šŸ‘ Sure did!
    1
  8173. Yes I did that šŸ˜‚
    1
  8174. I have a vast vocabulary of praises, today a long lost Georgia accent came out
    1
  8175. Ā @GlenCychoszĀ  are you talking about the jeep video or the VW?
    1
  8176. Ā @GlenCychoszĀ  sorry for no reply, I canā€™t read every comment.
    1
  8177. Ā @GlenCychoszĀ  I just looked. There was a scene cut out bc someone was talking to me and it had to go.
    1
  8178. I assumed it had a damaged catalytic converter
    1
  8179. Linguistic error
    1
  8180. Yea thatā€™s what I meant šŸ¤£
    1
  8181. Yea youā€™re getting screwed
    1
  8182. That less than accurate
    1
  8183. I dunno what I was thinking šŸ¤£
    1
  8184. AU
    1
  8185. No I got that flippy floppy backwards
    1
  8186. I think youā€™re boring
    1
  8187. Itā€™s a body shop car and the insurance companies donā€™t like camber kits.
    1
  8188. Does Bradenton count?
    1
  8189. šŸ˜‚šŸ˜‚
    1
  8190. Iā€™m considering my own jeep project. Iā€™m starting to like them for some strange reason. Iā€™ll have to make it a diesel tho šŸ˜Ž
    1
  8191. Never finished šŸ¤£
    1
  8192. lol
    1
  8193. There's a T fitting that connects to another hose
    1
  8194. I accept
    1
  8195. šŸ¤£šŸ¤£
    1
  8196. Very true sir
    1
  8197. Try to refresh your YouTube. I havenā€™t disabled anything so captions should be available. Could also be a YT glitch
    1
  8198. Iā€™ll let you know. I donā€™t remember who makes them.
    1
  8199. I can totally identify every make and model at first glance šŸ˜Ž
    1
  8200. How many did it place? This is like a 2 minute video šŸ§
    1
  8201. yea these are the kinds of cars the we had in high school...brings me back
    1
  8202. šŸ¤£
    1
  8203. Itā€™s prolly worth 2k now!
    1
  8204. Thank you! In the back of my mind I knew that but the recall process wasnā€™t happening in the moment.
    1
  8205. These filters are dry, no oil. I have one in my Duramax, its been good so far
    1
  8206. Heā€™s camera shy
    1
  8207. Ā @clbcl5Ā  šŸ¤£šŸ¤£šŸ¤£
    1
  8208. Yup me to bro šŸ˜Ž
    1
  8209. Bro itā€™s nearly impossible to film putting in an engine in, and itā€™s not much to see. Plus Iā€™ve beat that Subaru job to death with videos. Sorry to disappoint you, but like I said I my video I wasnā€™t feeling that great and this Duramax job was easy.
    1
  8210. Gotta pay to play
    1
  8211. Iā€™m make another vid on the Subi, canā€™t let it go with out a farewell
    1
  8212. Thank you!
    1
  8213. I see little downside to catch cans, except they have to be maintained and the owner would have to keep up on it.
    1
  8214. RainmanRaysRepairs.com and "contact us/schedule appointment"
    1
  8215. Exactly! It's totally about making money! LOL No, they're non serviceable and are simply part of the control arm.
    1
  8216. SRQ
    1
  8217. Cute isn't it? LOL!
    1
  8218. šŸ˜‚šŸ˜‚ right! And that was a mistake, my buddy was watching a TikTok video
    1
  8219. Iā€™ll make a vid next time I do one. Yes you should replace the whole cover. The spark plug tube seals canā€™t be replaced in the covers bc theyā€™re integrated into the cover
    1
  8220. Well I had a visitor show up, at least I got the testing done in one cut šŸ¤·ā€ā™‚ļøšŸ¤£
    1
  8221. Now Iā€™m confused šŸ¤£šŸ¤£šŸ¤£šŸ¤·ā€ā™‚ļø
    1
  8222. Look he is, you stop hearing the accent after a while, he didnt know he had an accent till we told him
    1
  8223. I had a fan on it
    1
  8224. Tyler! Prybars received. Duuuude! These things are awesome! Thank you!!!
    1
  8225. No pry bars yet. Iā€™ll check the mail today to see.The last time I picked up was 3 days ago
    1
  8226. Oh they do complain. Even shop owners tell me that I I worked for them, they would fire me for recording and talking to myself.
    1
  8227. Bc tie rod adjustment takes place by turning the inner not the outer. Good question
    1
  8228. Glad you caught that šŸ¤™
    1
  8229. It stops when the bubbles purge out
    1
  8230. It was the washer fluid bottle, cap was missing šŸ¤·ā€ā™‚ļø
    1
  8231. I shall investigate šŸ˜‰
    1
  8232. FR
    1
  8233. Ā @justsomeoldguyinthewoods3451Ā  Columbia Tn maybeā€¦. Itā€™s been a couple years but we were near Lewisburg / Columbia
    1
  8234. Got it from a Cracker Barrel in TN
    1
  8235. Ive always threaded these to check the level. Maybe I've been doing in wrong this whole time.
    1
  8236. One dayā€¦maybe
    1
  8237. Itā€™s not really that serious.
    1
  8238. Theyā€™re different sizes called staggered fitment
    1
  8239. Wasn't going to work this time
    1
  8240. I just used the shelf oil to flush it out a little. Then I filled it with the correct oil
    1
  8241. The drain bucket has debris on it
    1
  8242. Thereā€™s one out there that cost over 45k. Fully enclosed with climate control, heated seats audio system ectā€¦ crazy bc you can buy a Kia for half the price
    1
  8243. Florida man knows no limits hahaha
    1
  8244. Found it. Thanks It was actually bugging me.
    1
  8245. I forgot
    1
  8246. No can do, they're different sizes
    1
  8247. Jm3oilfilterwrench. Com
    1
  8248. I need real estate to calm down first, Bad time to buy or enter into contracts leases ect (In my opinion)
    1
  8249. And my answer you shall receive. Iā€™ve been doing this job for a long time and consequently I intuitively know the inns and out of the business including how to be efficient. (Even with one handšŸ˜‚) I bring a lot to the table regarding experience and skill and my numbers exceed expectations. The bosses like my level of transparency and they like that Iā€™m willing to share insight and knowledge with others.
    1
  8250. 25 for semi skilled. The Master Techs and senior master techs are making 30-36 and some are getting up to 45
    1
  8251. You missed the point
    1
  8252. Yes
    1
  8253. around 1k per year
    1
  8254. Ā @dant6323Ā  brnmcc beat me to it. Defiantly check that the blend doors are moving. You should be able to hear airflow change or hear the actuator moving in the dash
    1
  8255. LOL ;)
    1
  8256. They say thatā€™s just surface rust and itā€™s not a problem. Needs paint.
    1
  8257. Just a little bit. The comments would have you believe it was hundreds of $$$. I felt $25 was reasonable.
    1
  8258. Nope...$25
    1
  8259. No it's not the trim. There are two drains (little squares) at the front and rear of the doors in the inside edge. They're drains so water can edit. They get clogged with dirt pollen etc. Poke em with a screwdriver till they're free again. Our use compressed air.
    1
  8260. No Sir not me! I make my living off of repeat business
    1
  8261. Noooooo. I billed 0.3hr...$25
    1
  8262. C'mon if you think technicians are that bad try hiring an attorney. šŸ¤£ I billed them $25. See part 2 for the rest of the fix.
    1
  8263. .3hr Around $25. I kind of took a bath on it, it took almost an hour to get all of the debris out of the panel. But any price over 25 didn't seem fair. Plus I don't like a customer feeling like they gotta ripped off.
    1
  8264. You're the closest guess so far šŸ¤£... The actual charge was $25 and some change.
    1
  8265. Nope... Just $25
    1
  8266. šŸ˜‰. Itā€™s in a playlist
    1
  8267. hehehe
    1
  8268. Ā @chuckd5819Ā  zero is correct, the pinch weld is the point
    1
  8269. Reeeeee
    1
  8270. Nooo you weren't texting me. There are scammers I don't text the internet Edit: Except in the comments section
    1
  8271. Believe it or not, I have had the same spark plug socket since 2002 LOL It's a duralast form the zone.
    1
  8272. I literally placed the plug at the button of the home as I was saying ā€œdonā€™t drop it in so the electrode doesnā€™t bend. Then I used the magnetic spark plug socket with rubber inserts to thread them.
    1
  8273. Illegal? Wow thatā€™s some legislative overreach
    1
  8274. Rainmanraysrepairs . Com
    1
  8275. šŸ˜ˆ
    1
  8276. Will do!
    1
  8277. Was at my front door
    1
  8278. Not really šŸ¤·ā€ā™‚ļø
    1
  8279. Was a birthday present to myself
    1
  8280. Someone didnā€™t listen very wellā€¦ itā€™s an oil drain painā€¦boring
    1
  8281. Later šŸ˜‹ I still have to inbox it
    1
  8282. Iā€™ll tell her itā€™s an investment
    1
  8283. Ordered this thing weeks, maybe even months ago
    1
  8284. šŸ‘€
    1
  8285. šŸ¤£šŸ˜‚
    1
  8286. Nope, staying classy
    1
  8287. Same concept šŸ˜Š
    1
  8288. Ā @blaclie22Ā  all good āœŒļø
    1
  8289. Lol everything is censored now. You never know when the mob wants to cancel someone
    1
  8290. Bc they have holes on them
    1
  8291. It could be, itā€™s an eBay tool so who knows what else itā€™s used for
    1
  8292. Burn! šŸ¤£
    1
  8293. Definitely limp mode
    1
  8294. Depends if you owe them money or not
    1
  8295. Ok
    1
  8296. Scary
    1
  8297. I grew up in Ohio, I donā€™t fear many things, but black ice is one of them.
    1
  8298. Ummm I edit out the silent parts
    1
  8299. Biggest fear is something leaking after its all back together again. parts have a warranty but I don't want to use it
    1
  8300. IK šŸ˜‰
    1
  8301. I can move the fan, itā€™s just bolted on
    1
  8302. It was a hidden video šŸ˜‰
    1
  8303. Ohh but the floor being open will be great. It's going to create so much more usable space
    1
  8304. No noā€¦thanks to you!! šŸ˜Š
    1
  8305. She already has a wonderful sense of humor, Iā€™m sure sheā€™ll be ok
    1
  8306. Youā€™re absolutely correct. Thatā€™s just has to be my toxic trait šŸ¤·ā€ā™‚ļø
    1
  8307. Had this press for 20 years šŸ˜‰
    1
  8308. They have nylon lock nuts
    1
  8309. Done. Check the links in the description! šŸ˜‰
    1
  8310. Check the pinned comment or the description, I left links to the follow up videos that arenā€™t posted yet! Enjoy!
    1
  8311. Check the links in the description and the pinned comment! šŸ‘šŸ‘šŸ‘
    1
  8312. No way, burning wheels would be bad. They paid us a lot of hundreds to not destroy $1600 worth of wheels
    1
  8313. I dunno, sounds like a back injury
    1
  8314. Iā€™m sorry, Iā€™ll never post this video again
    1
  8315. Check the description, thereā€™s lots more!
    1
  8316. I didnā€™t go to UTI, but I am a shareholder
    1
  8317. I already broke it in another car this week. Plus my teacher was a Snap on, if I break it, I get a new new oneā€¦warranty šŸ˜‰
    1
  8318. šŸ¤£šŸ¤™
    1
  8319. Check the description. Link to part twoā€¦and bonus footage! I dunno who did it, and the car log brought it to us bc they couldnā€™t get the lugs off.
    1
  8320. I already broke it
    1
  8321. Itā€™s ok, lifetime warranty, theyā€™re made to be broken.šŸ˜‚ plus I already broke my breaker bar a couple days prior to this video on another car with the same issue.
    1
  8322. Check the description, thereā€™s a link!
    1
  8323. I broke my breaker bar already this week šŸ˜‚ warranty!! šŸ˜Ž
    1
  8324. Check out the links in the pinned comment and description
    1
  8325. Thatā€™s a major failure. The studs will stretch and can yield causing them to break while driving. And it can change the pitch of the threads, causing the lugs to get stuck. I think thatā€™s what happened here
    1
  8326. The world is fullā€¦
    1
  8327. Iā€™m good
    1
  8328. Itā€™s really not, see the first vid in the description
    1
  8329. Iā€™ve used 4 already and they have survived!
    1
  8330. šŸ¤£šŸ¤£
    1
  8331. No shyt bro
    1
  8332. The have really good food
    1
  8333. Glad youā€™re here!
    1
  8334. lol itā€™s ok. There scrap value is more than what I paid. Plus I get the blown up engine for autopsy, and thatā€™s what I really want. For educational content on my B channel
    1
  8335. I bet thereā€™s more
    1
  8336. ebay special
    1
  8337. Yes I did
    1
  8338. See pinned comment šŸ¤£
    1
  8339. Aloha to the 808! šŸ¤™
    1
  8340. Youā€™re not wrong, I havenā€™t made an appearance in a while šŸ˜‰
    1
  8341. Who?
    1
  8342. Did you know about Helene two weeks ago? Clearwater got bad storm surge as it passed by
    1
  8343. The whole state doesnā€™t evacuate Edit: Evacuations Go as follows: ā€œmandatory, want to, and shouldnā€™tā€ My house is inland and is made for wind, Iā€™m in the ā€œshouldnā€™tā€ category, Iā€™ll be in the way of people who need to leave more than I do. Folks who know they should leave already know who they are, Iā€™m not Ryan Hall, Iā€™m saying to not freak out and think clearly
    1
  8344. Ā @DRACOS1313Ā  Last night was ok, bunch of and rain a few trees are already down. Tomorrow it starts
    1
  8345. Ā @DRACOS1313Ā  Canā€™t do that
    1
  8346. Iā€™m not @RyanHall
    1
  8347. Iā€™m the guy telling people who are scared to not freak out and keep it together and think. Who TF are you?
    1
  8348. Too many people, nowhere to go. We stay.
    1
  8349. They'll need a warrant signed by a judge
    1
  8350. My family is safe in our house made of bricks and metal thatā€™s far from the flooding coast. Iā€™m willing and able to do my part out in the real world where it counts. And Iā€™ll be doing the same thing on Thursday after it passes. What are you doing on Thursday? Besides all I said was to not freak out and THINK!
    1
  8351. Iā€™m going in with a trailer Monday morning to clear the shop out just in case. Id rather move out and move back in, over having nothing to move at all.
    1
  8352. šŸ‡ŗšŸ‡øšŸ’ŖšŸ’ŖšŸ’Ŗ
    1
  8353. Itā€™s hard to be so hard. See you in the other side šŸ«”
    1
  8354. Lot of truth here šŸ«”
    1
  8355. Yup
    1
  8356. I would never do such a thing to a customer. Even if they upset me
    1
  8357. Iā€™ll take that as a compliment!
    1
  8358. Theyā€™re kinda tough to findā€¦ Google super scraper
    1
  8359. No I got them
    1
  8360. Sry
    1
  8361. Itā€™s ok, I trolled you. The pan was replaced due to damage from the collision
    1
  8362. Yea Iā€™m not mocking anyone, least of all challenged people. Why would you think that?
    1
  8363. Nope, I found it that way
    1
  8364. Itā€™s called a super scraper. I forget where I got mine. There are several on the market. Amazon has a few, and a google search will bring up a few also
    1
  8365. Took a hit from the impact and was dented in
    1
  8366. Itā€™s 9000 lbs on the sticker. I feel like it shouldnā€™t lift 9k. Like a Ford Ranger towing a gooseneck, it probably could, but never should.(I thought I mentioned itā€¦sry)
    1
  8367. I ordered one, and it turned out to be the wrong one. The correct pump was the back order unit
    1
  8368. Did I?
    1
  8369. I see what you did there šŸ˜
    1
  8370. It really was the trailer deck the fire, well some of it was
    1
  8371. My work is done hereā€¦for now
    1
  8372. Nosha
    1
  8373. Maybe next time šŸ˜‰
    1
  8374. Itā€™s ok, all of the connectors have rubber seals in them, and weā€™re dealing with 12 dc. The only thing I think I could hurt is the alternator, and Iā€™d have to submerge it to break it I think
    1
  8375. I am not I just prefer the phonetic alphabet to guarantee clear communication. šŸ˜‰šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  8376. Engines get wet while driving, they can get we while not driving šŸ˜‰
    1
  8377. I took a video, itā€™s better than a picture
    1
  8378. I got it! šŸ‘
    1
  8379. Iā€™m not worried about the woke. Iā€™m a straight while male, they automatically hate me. Thatā€™s just part of their core belief system. šŸ¤·ā€ā™‚ļø
    1
  8380. I'm not following... How did I deceive yall?
    1
  8381. šŸ˜ŠšŸ˜ŠšŸ˜ŠšŸ‘
    1
  8382. I donā€™t have a way to measure that at my shop. So if I focus on that, I have to way to substantiate my claims. YES a performance gain is there. Banks has several videos about their products.
    1
  8383. Ā @deserteagle10Ā  šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  8384. Haha. He owns an A/C company
    1
  8385. Nobody paid me
    1
  8386. Why you have to look at it like that? The situation was an opportunity, and I took advantage of it.
    1
  8387. Gale Banksā€™s wheel dynamometer says different šŸ˜‰
    1
  8388. Upsell šŸ˜
    1
  8389. Challenge accepted šŸ¤£šŸ¤£
    1
  8390. Itā€™s like Rust Jacking but different
    1
  8391. šŸæ
    1
  8392. They grow up soo fast and I WILL NOT be absent for any of it...we don't get a second chance with raising kids!
    1
  8393. Hey not everyone is right for everyone, no worries on the grief! We're all on the same team at the end of the day!
    1
  8394. Intake manifold comes off tomorrow, It's here from the dealer
    1
  8395. Email me your address again Chuck, I get one to you!
    1
  8396. ws thinking of you today :)
    1
  8397. Nawww thatā€™s just my tone, itā€™s natural sarcasm
    1
  8398. You are so welcome!
    1
  8399. a šŸ’€ one LOL
    1
  8400. Ā @pghguy7320Ā It is indeed! This is a ā€œmake it or break itā€ time of life for Lauren and I. Balance is everything and it can easily be upset.
    1
  8401. Terry thatā€™s doing to much! ā¤ļø TY kindly sir
    1
  8402. I do the best and most detailed inspections on these cars. I want to keep them in top tip top working order! šŸ˜‰
    1
  8403. Truth that everyone who calls themselves a patriot is also a racist?
    1
  8404. There is a slot in the strut for the bolts to pass through, and it wittiest go it. The slotted tab was down too far and was blocking the hole.
    1
  8405. I meant in the context compared to things were pre civil rights movement in the 60s. Today itā€™s perpetuated assholes and the media. Our problems can be solved much easier if we remove race from the equation. Are there people that believe their race is superior to another,? yes. do those people matter? No. Is the system geared towards lifting one group of people as opposed to the other? I donā€™t think so. Here in America everyone has equal opportunity. That is why foreigners can come here with nothing, and become millionaires. We all have the opportunity to choose our destiny, and skin color doesnā€™t determine that. IMO
    1
  8406. Ā @JusttomstuffĀ  glad youā€™re here! Did you get a deer?
    1
  8407. Well I canā€™t please everybody šŸ¤·ā€ā™‚ļø
    1
  8408. That wasnā€™t about politics. It was about blanket statements that that encompasses a large group of people and conflates them with a small group. I found it offensive and inappropriate, has nothing to do with politics
    1
  8409. Where else can it be found? Example?
    1
  8410. Ā @TotlKaosĀ  šŸ‘šŸ‘šŸ‘
    1
  8411. The trades are where the money is! Not just automotive by AC guys, electricians , truckers welders etc. In an age where nobody wants to work anymore, those of us in the service fields are in super high demand! The best part is, blue collar service jobs canā€™t be automated. There will ALWAYS be demand for skilled blue collar workers. Donā€™t forget, we run the country! If we stop, everything stops!
    1
  8412. šŸ˜‚šŸ˜‚šŸ¤£šŸ‡ŗšŸ‡ø
    1
  8413. They had some, they were just slid down, I clicked them into place later
    1
  8414. The Vice Grips were slipping, the shaft was too hard and smoothā€¦. Yea that came out wrong šŸ˜‘
    1
  8415. lol Iā€™m not
    1
  8416. You wouldnā€™t speak to someone like that face to face in real life. There are more eloquent ways to get your point across.
    1
  8417. People look fit and find a reason. Thatā€™s garbage
    1
  8418. No Iā€™m not that guy. Letā€™s have this Conversation in the pinned comment thread. Respectful decisions please. We need more talking and less finger pointing
    1
  8419. šŸ˜±āœŒļøšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  8420. Yea we were done with that years ago. Nobody gives a shyt
    1
  8421. Case in point, you called me a racist for having an opinion that you donā€™t like. Think about that for a minute before throwing stones
    1
  8422. Bc I couldnā€™t find a pic of an express van šŸ˜
    1
  8423. Youā€™re right, Iā€™m not
    1
  8424. No I didnā€™t reuse it, I replaced the steering knuckle and used the original bearing
    1
  8425. -.3*
    1
  8426. FR
    1
  8427. Ya I did that
    1
  8428. Thanks to you my guy! šŸ«‚
    1
  8429. Itā€™s the pickup fire the wheel speed sensor
    1
  8430. Normally I would but it came in unsafe and un drivable
    1
  8431. Youā€™re the coolest
    1
  8432. It just wasn't a priority for the owner or myself so I got to it when I could
    1
  8433. Yes I'm going to replace the carrier and the rest of the bearings bc the clutches have been swimming in the old burnt up fluid and there's pitting on the spider gears. So its getting a full rebuild. I rolled the dive today and installed the pinion without setting up the carrier, so fingers are crossed on pinion depth
    1
  8434. The core is $700 plus shipping, I have to send it back. You don't want it, it's 240k mile old
    1
  8435. Got my money out of emā€™ ā˜ŗļø
    1
  8436. Real Allisonā€™s are made by Detroit Diesel Allison, that 10 speed abomination is a GM Ford love child where they bought a license from Allison in order to call it an Allison. They had to keep the branding so the Duramax buyers wouldnā€™t reject the new trucks.
    1
  8437. Theyā€™re done for
    1
  8438. FR I'm only an arrogant asshole at first, and then later on it's fine lol
    1
  8439. Nope not yet
    1
  8440. Dark SIDE!
    1
  8441. nope, that was just some pressure to get him tom sell it to me, my ploy didn't work
    1
  8442. Hasnā€™t been a problem so far
    1
  8443. The deeper I go the wore it gets, I keep finding things that should be refreshed. We're goin' in!
    1
  8444. I canā€™t stop
    1
  8445. Yes I just referenced it to try and get it close I did balance the wheel but cut that part out. The scene was boring
    1
  8446. Indeed I did
    1
  8447. Challenge accepted
    1
  8448. Iā€™ll try to see if I can get dirt to pass through one by tapping it on the bench with the clean side down.
    1
  8449. Nope. I remember too!
    1
  8450. RainmanRaysRepairs.com šŸ˜
    1
  8451. I doesnā€™t stitch well due to the small size
    1
  8452. Nothing wrong, my only gripe is that the party isnā€™t popular enough right now
    1
  8453. She is! Good eye, sheā€™s mixed with ridgeback too. Amazing combo IMO, sheā€™s almost 13 now and has slowed down quite a bit.
    1
  8454. I throw jabs when I can šŸ˜‰
    1
  8455. The shorter ones are actually harder to edit/complete (for me) Less opportunity to include information
    1
  8456. So Iā€™ve heard šŸ¤£
    1
  8457. It could be fully interactive
    1
  8458. It needs more to have controls to count
    1
  8459. I donā€™t know if it can be done. However I think the parts are in fact compatible. Check the forums and see if anyone else has done it. Reminds me of my old 02 suburban, I swapped the front brakes out with PPV oversized pads rotors and calipers from a 13 police Tahoe
    1
  8460. And thanks to you too!! šŸ™‚
    1
  8461. I noticed šŸ˜
    1
  8462. I did a 4l60 once with 400k on it šŸ˜¬ Itā€™s still goin
    1
  8463. thanks!
    1
  8464. No wayyy
    1
  8465. I did that long ago
    1
  8466. šŸ‘
    1
  8467. Never met him
    1
  8468. 2-3
    1
  8469. Welcome friend!
    1
  8470. No need to poach off of @Mattsoffroadrecovery
    1
  8471. HahahašŸ¤£šŸ¤£šŸ¤£
    1
  8472. Fair enough. I think most of these builds are waaay over the top, but I can appreciate the effort and resources that has gone into them
    1
  8473. And they suck at getting their point across too šŸ¤£šŸ¤£
    1
  8474. Turn your volume up
    1
  8475. Iā€™ll smoke test it to find out
    1
  8476. He works here
    1
  8477. Pricing a head also
    1
  8478. Looking into it
    1
  8479. Ooohhh a laser beam good thinkin
    1
  8480. https://youtu.be/-SdbIK73cBw. Negative, it really was the first start in weeks
    1
  8481. Itā€™s not going to play out like that.
    1
  8482. I could have pushed them in by hand, they went in super easy
    1
  8483. 0.042ā€
    1
  8484. Noooo waaaay! šŸ˜¢
    1
  8485. Absolutely!! šŸ‘
    1
  8486. The AI does weird things
    1
  8487. I believe the wires become brittle and thatā€™s why they break
    1
  8488. Just brake parts cleaner
    1
  8489. Replace the cover gaskets also not just the crank seal
    1
  8490. The parts stores carry a dorman and a Delco rear cover
    1
  8491. Sry, google does that I have nothing to do with advertiser space. So the Scientologists are advertising on YouTube now? 2023 šŸ¤·ā€ā™‚ļø
    1
  8492. šŸ¤£šŸ¤£
    1
  8493. I would
    1
  8494. It walked away at the place I used to work for
    1
  8495. I did
    1
  8496. I think he drive it away. It disappeared overnight after he came in, paid the bill and took his keys
    1
  8497. šŸ¤£šŸ¤£
    1
  8498. Ok, chief
    1
  8499. Ā @playdgĀ  IG..I donā€™t get the stroking part either
    1
  8500. Doesnā€™t matter
    1
  8501. I donā€™t like them, it hooks the wheel and the steering parts can get ā€œloadedā€ requiring a redo. I just mashed sure to watch the wheel that Iā€™m not adjusting due a number change. If it moves, Iā€™ve loaded the linkage. Additionally I recheck steering wheel center after making all adjustments, and make tweaks if necessary
    1
  8502. Kinda sort of. Weight distribution does matter in side module. Many European cars require that weight be added to the car to simulate passenger presence. Sitting in the car to measure caster had no effect on the outcome.
    1
  8503. Mehā€¦I went back and saw the breech you mentioned. Is ok. Thatā€™s to access the features of the aligner program from the machine. No security risk here.
    1
  8504. šŸ˜‚šŸ¤£šŸ¤£
    1
  8505. How about shouldnā€™t?
    1
  8506. You got it
    1
  8507. It really messes up the folks who use the notifications. Folks will miss the first one and end up at the second one, they wonā€™t know whatā€™s going on
    1
  8508. Thanks! Welcome back!
    1
  8509. Yes
    1
  8510. Drum brakes in Michigan changed my life šŸ¤£šŸ¤£šŸ¤£
    1
  8511. Living in the Matrix version that includes SKYNET
    1
  8512. This is a highly edited YouTube videoā€¦ click
    1
  8513. Lol Eric will definitely chime in if I did it wrong šŸ˜…
    1
  8514. I know bc we checked with a laser thermometer. I failed to mention that part, but the t-stat didnā€™t do it.
    1
  8515. Buc-ees should build the Fl Tx causeway it would be an engineering masterpiece
    1
  8516. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  8517. šŸ¤£šŸ¤£
    1
  8518. I have a few days to work on it after SEMA this week. Iā€™ll spend Friday and Saturday on it. I need a hot glue gun to repair some of the headliner clips
    1
  8519. Quite possible
    1
  8520. Hygroscopic
    1
  8521. Not a sponsor
    1
  8522. Eric did, then he sent me the file šŸ˜‰
    1
  8523. You have no idea how much I had to edit out šŸ˜‰
    1
  8524. This was before my intervention
    1
  8525. šŸ¤£ straight to the repair shop!
    1
  8526. Link to part one here! https://youtu.be/6dsqbKhxYyM
    1
  8527. I think circumstances dictate weather or not to use lube. Itā€™s not necessary for noises on a quality pad bc many have a backing plate to prevent noises. Years ago pad sets didnā€™t. I prefer not to lube the shims bc it can run and end up on the rotor or get into the pad. AND it can collect brake dust and build up nasty globs
    1
  8528. dealership training will go a long way in the future and theyā€™re always training
    1
  8529. You didnā€™t stay till the endā€¦gotcha
    1
  8530. I saved it for the very end
    1
  8531. Ummmmm šŸ¤Ø
    1
  8532. No I did that weird blip with the lights and that was it. I drove it couple more times after the video and abs was reading the RR. Not sure why the lights came on and off at the end. It could have been the scanner communicating with the abs module
    1
  8533. Just are realist
    1
  8534. Glad youā€™re here!
    1
  8535. Thatā€™s what Iā€™m avoiding šŸ‘šŸ‘
    1
  8536. Glad youā€™re here! šŸ‘
    1
  8537. Iā€™ll fix the focus. I need to learn how to use it
    1
  8538. Because I made my own
    1
  8539. Iā€™ll get it right next time!
    1
  8540. It has a machined groove in the cover to accommodate an o ring seal
    1
  8541. Why do you say that?
    1
  8542. 80psi
    1
  8543. yes it is
    1
  8544. šŸ¤£
    1
  8545. Turns out that the PN for the hose was for an ambulance package
    1
  8546. 100%, I checked the bolt against the bottom of the threads before installing it
    1
  8547. Its more fun for me...breaks up the monotony
    1
  8548. BC my compressor is also on its way out. After the condenser change, the pressure went down and i could see the high side needle jumping
    1
  8549. It's either pieces of the hose, or pieces of the compressor that are clogging the system
    1
  8550. Its black magic LOL
    1
  8551. Heā€™s not wrong they once were removed from the engine compartment, not the interiors must be removed
    1
  8552. The dye packs with stop leak in them do. But Pag with Uv dye is fine. Most systems have dye from the factory
    1
  8553. If I screw up and break something , thatā€™s on me. If things fall apart during a service, like sensors, connectors, hoses ect thatā€™s usually added to the bill
    1
  8554. šŸ¤£ Itā€™s was the fast acting formula šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  8555. Anchormanā€¦remember sex panther? šŸ¤£šŸ¤£
    1
  8556. Had one in my 89 S10šŸ˜…
    1
  8557. The power of Christ compels you!
    1
  8558. I think thatā€™s a little high, but it would depend on how many bolts are broken. AND if the donā€™t come out, itā€™s cyl head removal and machine shop time
    1
  8559. No time to order the sticker!
    1
  8560. šŸ¤£šŸ¤£
    1
  8561. Itā€™s unrealistic to expect a tech to make something work as expected with inferior parts
    1
  8562. The switch wasnā€™t in the door panel it was on the center console. The plugs on the door panel are for speakers and the mirror controlsā€¦gotcha
    1
  8563. It truly is an art form šŸ¤£
    1
  8564. I greatly value my time and it really chaps my ass when it gets wasted. And the gloves are Astro-grip nitrile
    1
  8565. Part of the job I guess šŸ¤·ā€ā™‚ļø
    1
  8566. Iā€™m filming in a public area. And yes everyone knows
    1
  8567. Probably nothing. They canā€™t be held liable for the owners choices.
    1
  8568. Lol thereā€™s always more to the story
    1
  8569. Iā€™m not the epa police
    1
  8570. Pretty close huh? šŸ¤Ŗ
    1
  8571. The wiping down was free
    1
  8572. Close buuuut, there was falling glass danger, AND the bolts do in fact go through the window šŸ˜‚
    1
  8573. Yea I learned that I missed out on that brcc uodate. I had no ideaā€¦I was just trying to get free coffee. Is there anyone on the red team that sells freakin coffee? Donā€™t leave me! I didnā€™t know!
    1
  8574. Yea thatā€™s what they saidā€¦could have been a miscommunication šŸ¤·ā€ā™‚ļø
    1
  8575. Not by me it didnt
    1
  8576. šŸ˜³ what did I miss? Have I been deceived?
    1
  8577. Biohazard!
    1
  8578. Now Iā€™m pissedā€¦ it seems Iā€™ve been led to believe in a false perception
    1
  8579. The comments have not been good to brcc todayā€¦I may have missed something. This is what I get for trying to score free coffee
    1
  8580. Ā @heinrichstyer5388Ā  Thx for letting me know, I never got that newsā€¦. I heard they donated to Tulsi Gabbard a while back and folks didnā€™t appreciated that. I didnā€™t personally mind and didnā€™t careā€¦ but hitting Kyle with a bus??! No No no!
    1
  8581. Ā @heinrichstyer5388Ā  Those Mfā€™ers šŸ¤¬
    1
  8582. I didnā€™t even know! Comments informed me today. Iā€™m regretting my decisions now.
    1
  8583. Ā @gerrynightingale9045Ā  Absolutely! Im not putting an old water pump back on. Replacing the timing chain too
    1
  8584. Ohhh wait till the video before you reeeeee about the water pump Gerry šŸ¤Ŗ. Yea I remember you!
    1
  8585. I fear no troll! Theyā€™ve fallen into my trap! (Evil laugh) Bwahahahahaha!
    1
  8586. šŸ¤£šŸ¤£
    1
  8587. A war has started
    1
  8588. Deleting posts? Oh no, I donā€™t do that.
    1
  8589. Ā @andrewcastiglia9548Ā So are everyone elseā€™s. Look at Scotty right now
    1
  8590. I knowā€¦ gotta take a break sometimes šŸ˜‰
    1
  8591. The market is dictating the price. Itā€™s a perfect storm. Low supply of new inventory, and high demand. With all the joblessness I canā€™t see why people are buying cars right now. Not to me mention ask the free credit out there. It reminds me of the housing bubble in 05-07
    1
  8592. No tick bite, I did get stung by a wasp in the left wrist yesterday. The bastard was in my closet and living in a t shirt
    1
  8593. 75%
    1
  8594. Theyā€™re snap on ratchets. Milwaukee also makes a similar ratchets
    1
  8595. many of them, they stick worse than a skunk
    1
  8596. Ewwwww nasty!!
    1
  8597. I know I know, itā€™s that first glance where my brain fails to make the correlation. šŸ¤¦ā€ā™‚ļø Iā€™m just not a sharp as I used to be. šŸ‘“
    1
  8598. really? it only weighs a couple pounds
    1
  8599. šŸ˜³šŸ˜³šŸ˜³
    1
  8600. I need to get the axles and other parts out of the truck before scrapping them. It will be easier to chop them apart to remove the axles.
    1
  8601. Ā @ecarroll3723Ā  I understand what you mean now, my mistake. I was thinking ā€œwhy would he put chains over the trailer tongueā€ My dumb ass is thick sometimes lol. šŸ˜‚ I learned from tow truck drivers to hook chains under, I believe theyā€™re less likely to bounce off if the hooks are hanging under rather than over. I donā€™t known off hand the physics of it. But thatā€™s what was taught long ago Edit: check out MidwestTruck on YouTube . Ron Pratt runs a heavy recovery truck, and I believe he hangs his hooks as well and he has some big ass hooks šŸŖ
    1
  8602. I run the chain under the tongue and I crosse them like an X. The logic with that method is such that if the trailer tongue becomes disconnected the chain cradle the tongue and hold it off of the ground, while simultaneously preventing trailer sway due to the angle, because the chains are crossed.
    1
  8603. Itā€™s a marine deep cycle perfect for the task sir
    1
  8604. Will said šŸ«”
    1
  8605. Play on words, the whole truck trailer and load was 19,500lbs, the steel was 5500lbs
    1
  8606. Yes the truck will charge the trailer battery, trouble is, the scrap yard is a short trip and the wire is small, the there wonā€™t be enough time to get the battery charged. Therefore I threw it in the charger. Iā€™m going to put a little solar charger on the trailer to maintain the battery. Edit: If I ran a larger wire to the trailer it would not be an issue.
    1
  8607. Bet it lost the outer bearing and the whole hub came off. Boeing things I guess šŸ¤·ā€ā™‚ļø
    1
  8608. I donā€™t a cable set up yet
    1
  8609. They OD with anything more than a $20. Reality sucks sometimes
    1
  8610. I need the axles for my jeep
    1
  8611. SurešŸ¤·ā€ā™‚ļø but itā€™s not bad for gas station coffee
    1
  8612. Things change I guess šŸ¤£šŸ¤£šŸ¤·ā€ā™‚ļø
    1
  8613. I need to get the axles out for my jeep project. So I figure we can cut the body and frames apart and throw in the trailer, easier than dragging frames and bodies onto a flatbed. Plus I might need the springs and hangers and scrap steel from the frame
    1
  8614. But I told him to get Hot dogs šŸ™ƒ
    1
  8615. Hi Roger!
    1
  8616. I think its reasonable for my particular truck. Its an 07 3500 dually long bed crew cab, with a ranch hand bumper 90gal aux fuel cell, steel back rack window guard, and a toolbox. I think it weighs around 7500lbs if the tanks are full. I have my reasons.
    1
  8617. Meh šŸ¤·ā€ā™‚ļø
    1
  8618. oops LMAO!
    1
  8619. šŸ„ŗ
    1
  8620. Iā€™ll work that out over time. Plus I donā€™t know how much this stuff costs yet
    1
  8621. Lol itā€™s ok
    1
  8622. must have been the angle
    1
  8623. Really?
    1
  8624. Fresh gas and key er rip. Itā€™s going it start or itā€™s not. Charge the battery too.
    1
  8625. I replaced them a few weeks ago (mentioned at end) šŸ˜‰
    1
  8626. He goes do deee dooo šŸ˜Ž
    1
  8627. Probably not
    1
  8628. The broken part was part of the panel and was not replaceable
    1
  8629. Iā€™ll do it.
    1
  8630. I like goodies! Go to my ā€œabout tabā€ on the channel home page and there is a PO box
    1
  8631. Alldata
    1
  8632. I edited those pieces out šŸ¤£
    1
  8633. I like goodies! Go to my ā€œabout tabā€ on the channel home page and there is a PO box
    1
  8634. Itā€™s an industry standard term
    1
  8635. šŸ˜³šŸ˜³šŸ˜³
    1
  8636. I am a robot
    1
  8637. The lift post has a rubber pad, it happens
    1
  8638. šŸ¤£šŸ¤£
    1
  8639. No heart attacks! I'm keeping it exercised :)
    1
  8640. Ā @job38four10Ā  Its pretty random. Thereā€™s 1000s of them. But I tryšŸ˜‰. āœŒļø
    1
  8641. Oil is fine
    1
  8642. Itā€™s just a fake account. Been banning them for days
    1
  8643. Saved it for pt2 šŸ˜‰ Edit: and yes Iā€™m screwing with you too šŸ˜‚šŸ˜
    1
  8644. šŸ‘ fine and dandy. You want a good laugh? Look up George Carlin Fine and Dandy šŸ˜‚šŸ˜‚ RIP Georgeā€¦we need you right now
    1
  8645. Not my decision šŸ˜‰
    1
  8646. Thatā€™s the exception
    1
  8647. Lol no I started the project at at 12:30 and they thought it was going to be done by shift endšŸ™„
    1
  8648. I decided it needed a torch. The others decided itā€™s was easier their wayā€¦ ā€œyou can lead a horse to waterā€¦. Then they drown themselves ā€œ
    1
  8649. I donā€™t know. Itā€™s a brain power of some sort šŸ¤£
    1
  8650. You canā€™t get those nuts straight on, the converter isnā€™t the way
    1
  8651. I could have gotten it to matchā€¦ but it would have talken a half hourā€¦ nope
    1
  8652. Good!
    1
  8653. Itā€™s been picked up. It was leaning against the house. That flag is retired and awaiting proper disposal. And I agree with you šŸ’Æ. Keep old glory flying high!šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  8654. I do have a habit of saying whatever I'm thinking
    1
  8655. Ā @Number6_Ā  Woa wait a minute. Do NOT make the mistake of assuming that the circus calling itself our government is a reflection of the people, our nation and itā€™s traditions. We are all aware of this problem. The us is going through some serious issues right now internally over our ā€œleadershipā€.
    1
  8656. Ā @Number6_Ā  I was Lol ing at your statement insults toward my country. And yes I have lived outside of the United States.
    1
  8657. Lol better than a communist societyā€¦weā€™re still alive
    1
  8658. If they guys around you have a meth problem, youā€™re going to the wrong shop
    1
  8659. šŸ¤£šŸ¤£šŸ¤£
    1
  8660. When I have the space for it
    1
  8661. How so? Not bc the brake clean soundā€¦ Eric sent it to me
    1
  8662. We can do that here
    1
  8663. It ran ok, I assume the valves stuck after I shut it down and it cooled off. It all happened over night.
    1
  8664. Thats not exactly accurate good sir šŸ˜‰
    1
  8665. prolly going to be like 6 videos, its a long job
    1
  8666. Itā€™s either a very weak cp3 pump or injector return rates are waaayy too high causing low rail pressure. The pump was replaced a year ago. After pulling the right side injectors out I found poor quality units were installed (bottom of the barrel cheap-O units) They have to go
    1
  8667. Thats a negative, TY posts early to channel members
    1
  8668. šŸ¤£šŸ¤£
    1
  8669. Thinking of some S&S injectors
    1
  8670. Ā @steveo6631Ā  no offense taken at all, you know Iā€™m a bit of a smart azz šŸ˜‰
    1
  8671. You want me to test the broken off sensors? šŸ¤£
    1
  8672. Havenā€™t you heard?
    1
  8673. šŸ¤£šŸ¤£šŸ¤£šŸ¤£ Savage
    1
  8674. Iā€™m bottom dollar at $125 for cars and light trucks. Euro and diesel Iā€™m at $145
    1
  8675. Didn't mean to offend
    1
  8676. Theyā€™ll sue me for defamation
    1
  8677. šŸ¤¦ā€ā™‚ļøšŸ¤¦ā€ā™‚ļøšŸ¤¦ā€ā™‚ļø
    1
  8678. I dunno! šŸ¤·ā€ā™‚ļø YT places them at 6-9minute intervals IG
    1
  8679. Up is down and left is right. Righteousness is punished, and debauchery is celebrated. 2024 just said ā€œhold me beerā€
    1
  8680. I remember
    1
  8681. They I would have been making a different video. PewPew
    1
  8682. I usually don't argue with the trolls. No good will come of it.
    1
  8683. Iā€™ve been fixing machines for 20 years, imagine how good I could be at destroying them. Free heat shrink is a drop in the bucket
    1
  8684. I lost my thermometer. Iā€™ll get a new one soon
    1
  8685. Sundays, Definitely only on Sundays....yea
    1
  8686. No the one I changed was an oil line to the injectors
    1
  8687. Just drive without reg šŸ¤·ā€ā™‚ļø
    1
  8688. Sometimes
    1
  8689. Ā @clbcl5Ā  So thickšŸ„‡šŸ¤£
    1
  8690. BC i need the extra large one for commercial filters. Mike at JM3 is making me one.
    1
  8691. You're a bonus
    1
  8692. Wasnā€™t sure how the injectors would deal with thread lockšŸ¤£šŸ¤£
    1
  8693. I dunno... we were driving with a fuel leak, and it could have made a fire
    1
  8694. I often have 2-3 cars going at any given time
    1
  8695. šŸ¤£ I take it youā€™re up in the rust belt? I feel your pain, spent a year in Detroit once and a few in Kansas City
    1
  8696. Pretty close
    1
  8697. Mehh
    1
  8698. No no no, thank YOU!
    1
  8699. What if itā€™s a gooseneck??
    1
  8700. šŸ¤Æ
    1
  8701. Nope
    1
  8702. Done
    1
  8703. Negative, that brought in a lot of business
    1
  8704. Already open
    1
  8705. Whatā€™s App is NOT me! Scam
    1
  8706. Ā @dragonslayer9671Ā  My big mouth calling things out how I saw them.
    1
  8707. Iā€™m in the manatee/ Sarasota area . Donā€™t tell the comments where you are šŸ¤£ (they found me months ago)
    1
  8708. Already open for business
    1
  8709. šŸ’Æ aways moving foreword!
    1
  8710. No I really got fired that day
    1
  8711. I took the overhead lights too
    1
  8712. Who me? I like freedom.
    1
  8713. I did, this vid is a few months old
    1
  8714. If theyā€™re werenā€™t torsion bar springs I would go for it on the ground
    1
  8715. Ā @kuualohakamaaina7269Ā  Very appealing and Iā€™d love to spend more time out there! Itā€™s just not in a cards right now šŸ™ƒ
    1
  8716. Iā€™ll definitely be using grease with these larger trailers
    1
  8717. There wonā€™t be a third time unless I fire myself
    1
  8718. šŸ˜³
    1
  8719. They changed their name and a few other things I wonā€™t talk about
    1
  8720. We all know that if itā€™s on the internet, it must be true šŸ¤£šŸ¤£šŸ¤£
    1
  8721. Yā€™all know I can say something without speaking on it šŸ˜‰
    1
  8722. I piss people off šŸ¤£šŸ¤£šŸ¤£
    1
  8723. Iā€™m good, no worries
    1
  8724. Itā€™s better than that, take a look at my newest videos
    1
  8725. There were some words that people didnā€™t appreciate šŸ˜‰
    1
  8726. I definitely do not have the personality to be an employee anymore šŸ¤·ā€ā™‚ļø My stone cold versions of situations and lack of a PC filter defiantly upset the overlords
    1
  8727. Heeey Welcome to the party!
    1
  8728. I know I doā€¦ just bc I can doesnā€™t mean I should. For example what that cop didnā€™t like that, he could pull me over later because he felt like it.
    1
  8729. I feel that I won šŸ¤£šŸ‘šŸ‘
    1
  8730. šŸ¤£šŸ¤£šŸ¤£
    1
  8731. šŸ¤£šŸ¤£
    1
  8732. āœŒļøšŸ˜‰
    1
  8733. They got me a week after hurricane IAN
    1
  8734. I cross my dump chains too, they were too short at first tho, I had to change them with longer ones
    1
  8735. So we can leave the shop empty when we exit
    1
  8736. Walk in and ask for a job! Show up and be ready to learn. You will never stop learning in this businessā€¦it gets into your blood
    1
  8737. I have a big mouth when itā€™s time to stand my ground or stand up for something
    1
  8738. Iā€™m stubborn
    1
  8739. I offered to franchise it two weeks ago. šŸ§
    1
  8740. Heā€™s waaaay to far north for me
    1
  8741. Never said a word about my GoPro šŸ¤·ā€ā™‚ļø
    1
  8742. Well I was already invited to piss offā€¦so whatever I do now is on mešŸ˜‰
    1
  8743. Most days šŸ¤£
    1
  8744. Probably, but it was cleaned several times off camera too
    1
  8745. Not really bc the tires are larger than stock size
    1
  8746. Later
    1
  8747. šŸ¤£šŸ¤£šŸ¤£
    1
  8748. Paint comes later šŸ˜‰
    1
  8749. Ty!
    1
  8750. Didnā€™t film itā€¦boring and took a long time. I also had to re shim the pinion setup
    1
  8751. Yea but that was pretty funny tho šŸ˜‰ I had to do it.
    1
  8752. āœŒļø
    1
  8753. I have a diag budget for these situations. Most of the time they get a call after inspection.
    1
  8754. Ā @ashtonanderson8898Ā  why?
    1
  8755. I watched Ericā€™s ASMR vid as I was uploading this oneā€¦šŸ¤¦ā€ā™‚ļøšŸ¤¦ā€ā™‚ļøšŸ¤¦ā€ā™‚ļø
    1
  8756. Right!!!!
    1
  8757. Email me
    1
  8758. Iā€™ll bite
    1
  8759. Itā€™s been a long time since Pink Panther was on the air. Like 30 years šŸ˜³
    1
  8760. Should I be using a turkey baster? šŸ¤£šŸ¤£šŸ¤£
    1
  8761. Watch the last 30 seconds. All your questions will be answered
    1
  8762. Yea itā€™s just an audible mockery. When the trolls start trolling all I can hear is ā€œReeeeeeeeeā€ šŸ¤£
    1
  8763. It was about the blue towels in the intake trolling. See Pt 3
    1
  8764. I donā€™t delete comments here
    1
  8765. Thatā€™s in part 2 šŸ˜
    1
  8766. šŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļøšŸ¤·ā€ā™‚ļø
    1
  8767. Thereā€™s better things to pick apart in my videos besides the intro šŸ˜‰
    1
  8768. Weā€™ll get to the beans and bags soon enough šŸ«”
    1
  8769. Two couplers and 4 clamps were over $80 for parts, not worth it. Ideally I would have just replaced the whole assembly with the premade ones, but the cost was 4x what I did here.
    1
  8770. Yea thatā€™s y mine is NOT Starbucks coffee
    1
  8771. They werenā€™t corroded Mr Hollatz.
    1
  8772. šŸ˜
    1
  8773. Itā€™s in a playlist
    1
  8774. Feelings donā€™t really matter when you deliver
    1
  8775. Nooooooo! Never shake em out. It can break loose the really small particles and actually allow them to pass through the filter
    1
  8776. Hahahaha!
    1
  8777. They say to ā€œBe the change that you want to see in the worldā€
    1
  8778. I was testing its durability
    1
  8779. Huh what did say?
    1
  8780. Ā @OAFNation314Ā  Crazy thing about the interwebsā€¦they miss nothing!
    1
  8781. I was wondering about that. If memory serves, I didnā€™t think they made an F350 HD edition
    1
  8782. You were bike riding n e way
    1
  8783. Negative, the new radiator comes with new clips. I save the old ones
    1
  8784. Totally a drill, I got it used for $20 in the trade in bucket. I have plenty of m12 batteries so I figured why not
    1
  8785. I donā€™t even know what it was, and I was there
    1
  8786. Right!
    1
  8787. I actually did buy premium ( not promoting) but it was worth it for me. The cool thing is, you can minimize YT and still get the audio, itā€™s cool for answering a text or looking something up during a video
    1
  8788. Nope
    1
  8789. Yea but the autolites are the cheap production line.
    1
  8790. Theyā€™re like a spring that twists instead of compressing. When used on an impact gun they absorb silver if the force and only allow x amount of torque to be applied to the fasteners. They do wear out and when they do, they donā€™t limit at much torque transmission and can over torque relative to the stated limit. I always use a lower gun setting with using the sticks. The purpose is to allow for fast installation of wheels and should always be followed up with a torque wrench and never trusted in their own.
    1
  8791. Good question, Iā€™m a multitasker šŸ˜‰šŸ¤™
    1
  8792. Just some low key trollingā€¦ but in all seriousness, I torque wheels and critical fasteners like rod main caps, differential bearings etc
    1
  8793. šŸ¤£ I put it back in! šŸ‘
    1
  8794. You missed the part where I used a torque wrench
    1
  8795. I hold A1 through A8, A9 Diesel C1 Service Consultant. I donā€™t display my certificates anymore at the shop for privacy reasons. šŸ˜‰
    1
  8796. They were worse than the one with the screw in it. And yes new tires go on the rear. Customer wanted them up front šŸ˜•
    1
  8797. Ā @ianlacey8121Ā  lol no youā€™re right it totally sucked. šŸ¤£
    1
  8798. Yea I tried a head mount and this was the result
    1
  8799. It is 2022 after all, anything can happen
    1
  8800. Canā€™t afford a glass one šŸ¤£
    1
  8801. The new ones do, this oneā€™s an 05. Spec said 5w30
    1
  8802. It's my first day
    1
  8803. Why should I go faster, we went through this in the vid
    1
  8804. Exactly! But the VW people unleash the power of the keyboard when I call anything else besides a VW ā€œDas Autoā€
    1
  8805. How much time? Enough to ask 12 times how much longer? šŸ¤£No lie, this lady was bugging the manager for ā€œhow longā€ before it was even in the shop
    1
  8806. Tomato TomĆ to
    1
  8807. I dunno, but they had it finished in a jiffy
    1
  8808. Reeeeeeeee!
    1
  8809. The entry level one
    1
  8810. Prolly for the best, thereā€™s a waiting list
    1
  8811. Iā€™ve always wondered what they think it is that weā€™re doing back there in the shop. Are we just sitting down? Eating? Drinking coffee and telling jokes? It never crosses their mind, that things actually take time to accomplish
    1
  8812. I thought they were close because the harbor freight icon wrenches look very nice. However I did the drop test on concrete and they failed the metal quality test. the snap on wrenches have a nice ringing tone to them where the harbor freight wrenches sounded pretty dull. Donā€™t get me wrong theyā€™re nice wrenches but theyā€™re nowhere near snap on quality
    1
  8813. Donā€™t be a Karen
    1
  8814. We were short handed that day.
    1
  8815. I donā€™t have a vac tank. Maybe later
    1
  8816. Your right, it takes longer to reach for the curved wrenches, theyā€™re behind the straight ones so I had to reach farther
    1
  8817. šŸ¤£ triggered by an oil change, Youā€™re funny
    1
  8818. But I wonā€™t be šŸ˜Ž
    1
  8819. I work at a pace of my choosing. For example I couldā€™ve dropped and lost that last drain plug crush washer, ā€œohhhhh noooooā€ now we have to order one. šŸ˜‰
    1
  8820. Truth be told, the cheap O filter that they bought didnā€™t include the litter ones. You get what it pay forā€¦unless itā€™s a Mercedes šŸ¤£šŸ¤£šŸ¤£
    1
  8821. šŸ˜³
    1
  8822. Very possible. Havenā€™t gotten that far yet.
    1
  8823. Not a chanceā€¦.I tried once
    1
  8824. Challenge accepted! As soon as I can find some drums to turn.
    1
  8825. Then it makes that ā€œpeeeeeeeewwwwwwā€ sound when braking on a spiral cut. (If you know, you know)
    1
  8826. Usually it is. This customer brought the rotors in with no truck attached. Therefore he paid no labor to remove them. Saved himself some $$$
    1
  8827. Replace them
    1
  8828. The situation was that the customer brought these in with no truck attached. And due to their condition and lack of a large lip on the edge, I had no problem with resurfacing them.
    1
  8829. Donā€™t bother with the tool truck. Order a streamlight stinger online and save $100. And the Matco light is a rebadged streamlight
    1
  8830. Heā€™s camera shy
    1
  8831. I totally had a brain fart šŸ¤£šŸ¤£
    1
  8832. Ding fries are done šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  8833. Edits šŸ«”
    1
  8834. Ā @SWHBOYCEĀ  I dunno I didnā€™t build the thing šŸ¤£šŸ¤·ā€ā™‚ļø
    1
  8835. Splitting hairs with that one šŸ¤£
    1
  8836. šŸ¤·ā€ā™‚ļøšŸ¤£šŸ¤£šŸ¤£ I do t donā€™t have any trans coffee ā˜•ļø
    1
  8837. Youā€™re late
    1
  8838. Iā€™ll pump it full of smoke later to find the leak. Super effective method!
    1
  8839. šŸ¤£
    1
  8840. I keep buying the tool for the belt, and they keep breaking- plastic
    1
  8841. I like a dab of grease in the groove
    1
  8842. Nooo šŸ«£
    1
  8843. I say oem are the best. I personally like Napa brakes. You get what you pay for, Iā€™ve found that lower cost brakes tend to make noise and do wear faster
    1
  8844. Sure it is
    1
  8845. I actually donā€™t mind fleet vans. I worked fleet when I was at the dealer so Iā€™m totally comfortable with vans, although most techs hate them
    1
  8846. Absolutely! I did that later
    1
  8847. I didnā€™t hear that rock
    1
  8848. I have a real life hater that doesnā€™t like me. He stalks my videos and gives me a šŸ‘Ž every time
    1
  8849. Youā€™re not wrong. I spent a year in Detroit once upon a time. Every brake drum needed a torch and a hammer to remove from the hub. I canā€™t say I miss those days.
    1
  8850. Your not wrong, even in the new ones, the HVAC doors are still vacuum operated just like they were 20+ years ago
    1
  8851. I have had this one for about 6mo and I use it daily. So far so good
    1
  8852. At least they didnā€™t use a dryer hose from Home Depot
    1
  8853. I understand that the gov of Cali wonā€™t let non vaccinated people into the ports of entry to unload or haul away the freight, like the truckers, rail personnel dock workers etc. looks politics are block out supplies. Desantis in Fl is offering incentives for the shipping companies to travel through the Panama Canal to unload here in Fl
    1
  8854. Part 3ā€¦ check link in description šŸ‘
    1
  8855. We shall see
    1
  8856. SillynoidšŸ¤£
    1
  8857. Whatā€™s that about?
    1
  8858. There is a link in the description I think. If itā€™s not working I have that car in a playlist, you can find it under my playlists
    1
  8859. lol The nicknames come naturally. Didnā€™t even realize that I said it till I was editing šŸ¤£
    1
  8860. Iā€™m not whining youā€™re whining
    1
  8861. Just today
    1
  8862. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£ bro šŸ’€
    1
  8863. Youā€™ll be back!
    1
  8864. Good point! It really is tough!!
    1
  8865. Behave yourself
    1
  8866. I learn something new every day, therefore I know nothing.
    1
  8867. Deal! Email me!
    1
  8868. You forgot the part where I caused the vibration before they brought it to the shopā€¦totally a scam. Donā€™t be a Karen
    1
  8869. I was confidentā€¦ but itā€™s risky
    1
  8870. Noooooooo!
    1
  8871. Pay someone else to do itšŸ¤£šŸ¤£šŸ¤£
    1
  8872. Itā€™s on repeat šŸ˜‰
    1
  8873. I knowā€¦.buuuut I didnā€™t have a nut that was exactā€¦send it!! šŸ¤£
    1
  8874. Lol itā€™s all there somewhere, the trouble is locating what you need
    1
  8875. Iā€™ll get it! Thx!
    1
  8876. Yea but the EPA makes the OEMs produce larger and heavier vehicles to meet emissions/Cafe requirements. Why do you think we canā€™t have 1/4 ton mini trucks anymore. They donā€™t weigh enough to pass emissions so they have to build heavier and larger vehicles to get into a different tier of compliance. Slightly dystopian but it makes sense so someone in ā€œpowerā€
    1
  8877. Should be around $900 total give or take. Part labor fluids etc
    1
  8878. All of them
    1
  8879. Never heard of it removing quality high temp paint. Maybe it can remove fresh rattle can paint.
    1
  8880. Oh no, we buy our own!
    1
  8881. look on ebay. Snap on PWZ2 Pliers
    1
  8882. Yes we actually did that. And the customer declined coming out of pocket for a few little things, like the control arm on passenger side
    1
  8883. it is fine
    1
  8884. I didnā€™t know we were racing šŸ¤·ā€ā™‚ļø
    1
  8885. šŸ¤£ clever idea using the dipstickā€¦ thatā€™s not me
    1
  8886. Link?
    1
  8887. Thx
    1
  8888. YES it does šŸ¤£
    1
  8889. Yea thereā€™s little pads on the edges
    1
  8890. They were popular once...just once...for like a week
    1
  8891. Or did I?
    1
  8892. Ā @colchronicĀ  it was the intake temp sensor, not a MAF, so the ecm didnā€™t notice
    1
  8893. go back and watch the first video
    1
  8894. SMA sent me that sound clip. Lol no weā€™re not related
    1
  8895. Iā€™ll do what my guy wants to do. We can just replace the bumper and paint it too.
    1
  8896. Because no matter what I do, someone is unhappy about it, so I do what I feel like at any particular moment
    1
  8897. Nope, Iā€™ve only worked in 2 or three cars from that were near the 100 yo mark
    1
  8898. $85
    1
  8899. Would you let wal mart change your u jointsā€¦. risky
    1
  8900. Lost art
    1
  8901. šŸ¤£šŸ¤£šŸ¤£
    1
  8902. What??? No waaayyyyyy šŸ¤£
    1
  8903. No it out šŸ˜‰
    1
  8904. One is 10ā€ and the other is 11ā€
    1
  8905. šŸ¤«
    1
  8906. I knowā€¦ right??!
    1
  8907. I was
    1
  8908. Next time
    1
  8909. Iā€™m cultured šŸ˜‰
    1
  8910. Video ws long enough this time
    1
  8911. Yes indeed I do.
    1
  8912. Yet you keep coming back
    1
  8913. Itā€™s work van and itā€™s capable of making some $$. Kinda makes it worth it Vs replacing itā€¦depends on circumstances I suppose
    1
  8914. We do. Use a desktop and go to my page. Itā€™s under the about tab
    1
  8915. šŸ¤£šŸ¤£ Itā€™s already disabled. If the Alphabet agencies have a problem they can go after the people who make the kits
    1
  8916. Itā€™s filtered and sent to the storage tank in the machine. It can be reused.
    1
  8917. šŸ„¶
    1
  8918. Reallyā€¦ now ur late?? šŸ¤£šŸ¤£ Glad you got some ZzzzZzzzZz ā€˜s
    1
  8919. Thatā€™s just great! Email mešŸ˜
    1
  8920. šŸ˜³
    1
  8921. Ā @josephmeno3223Ā  yea I know, hurricane messed me up a little and wrecked our schedule and work flow. It turned into a ā€œneed to get things done ASAPā€ situation. I sry šŸ˜ž
    1
  8922. I know where everything isā€¦.exactly
    1
  8923. There are others. I have a flat stall and a lift. Occasionally I invade another stall
    1
  8924. One of those did catch my eye a few weeks ago. Theyā€™re really nice
    1
  8925. There you are! Havenā€™t seen you a bit!
    1
  8926. Fcf72
    1
  8927. More weight better traction
    1
  8928. The machine defaults to charge the high side and I usually keep that setting.
    1
  8929. absolutely!
    1
  8930. I found some vents for RVs that use CPU fans to pull air, I'll cut a hole in the box and strategically mount the fans
    1
  8931. The voltmeter with the USBs, that gauge? Found it on eBay
    1
  8932. I think itā€™s 3 micron and more capacity. Itā€™s not so much the extract filter, I can now use another size filter. I think that Baldwin filters outperform CAT units, more research will be needed.
    1
  8933. Because the injectors and fuel pump have 230k on them and will fail at some point. When i replace the pump and injectors it's going to be an upgrade therefore I'll want some added insurance.
    1
  8934. Itā€™s also illegal to power a house without the appropriate disconnect panel and circuit breakers. I donā€™t plan on plugging the truck into the house generator panel. Buuuuuttttā€¦.. now that weā€™ve mentioned it šŸ˜ˆ
    1
  8935. I bought it to run landscape work back in 2017, I'm still finding dirt and grass lol
    1
  8936. Ā @andyvitzĀ  I guess now I need a sheet of lead to wrap around my ECM
    1
  8937. Did it about two years ago šŸ‘
    1
  8938. I don't have that kind of grid tie, it's older technology not connected
    1
  8939. šŸ‘‹
    1
  8940. Itā€™s fine
    1
  8941. Itā€™s been said, not intentional
    1
  8942. That little blue wire in the fuse block was sending power straight to the fuel pump
    1
  8943. I am!
    1
  8944. Glad youā€™re here šŸ˜
    1
  8945. Sry šŸ„²
    1
  8946. The title is literally what happened. I donā€™t think Iā€™d call it click bait thoā€¦ I describe it as a play on words
    1
  8947. Yea no Iā€™m not that guy
    1
  8948. Customer had AAA do it laterā€¦.I dunno why
    1
  8949. Did you receive a comment/message from the Telegram scammers? Donā€™t respond to them plz
    1
  8950. Weā€™re sorry youā€™re having a bad day. Cheer up, maybe tomorrow will be better
    1
  8951. Just brake parts cleaner
    1
  8952. I would have but I was under side pressure to get it done. It goes like thisā€¦.the part to a long time to arrive, so work faster now
    1
  8953. repair guys had to come out and fix the cable, it took about two hours
    1
  8954. sorry, it was noneventful. The repair guys came and fixed it, not much to see they were up on ladders
    1
  8955. I actually do recognize those. They were about 10-12 yo when u first fit into the biz
    1
  8956. The bolt store šŸ¤·ā€ā™‚ļø
    1
  8957. No can do, "All Thread" rod is not strong enough for the application.
    1
  8958. Thanks John šŸ˜ŽāœŒļø
    1
  8959. I canā€™t make a weld that strongā€¦well, maybe I can but I wouldnā€™t trust someoneā€™s life to it
    1
  8960. Now I know!!
    1
  8961. I been posting, but folks arenā€™t seeing them.
    1
  8962. You know I know that šŸ˜‰
    1
  8963. Indeed it isā€¦.
    1
  8964. Feels like it
    1
  8965. I sell those items at a reasonable price, and my store isnā€™t ā€œpushedā€ šŸ˜‰ Edit: Mugs are sold out
    1
  8966. ā€œEveryoneā€ used a figure a speech that encompasses a large group of people that became the topic of conversation.
    1
  8967. Iā€™m glad youā€™re here!
    1
  8968. You know I know šŸ˜‰
    1
  8969. 1A all day!
    1
  8970. They got you
    1
  8971. šŸ˜ˆ
    1
  8972. Fr Iā€™m not straddling anything, just canā€™t publicly shove a flag up YTs arse
    1
  8973. About 400
    1
  8974. Someone must have identified a based fundamental viewpoint that they disagree with.
    1
  8975. I thought we were going to attempt another summer of love. Itā€™s been a sigh of relief so far, now we all need to get through January
    1
  8976. I have never seen one in the wild. There were so few produced and even fewer are left. Donā€™t have one??
    1
  8977. Itā€™s a sad state of affairsā€¦ letā€™s wake up FR
    1
  8978. The yoke is wallowed out, you need a new yoke
    1
  8979. So who owns them?? Someone does!
    1
  8980. I saw your comment 15 minutes after that šŸ˜‰
    1
  8981. It's been happening for a while, a lot of you are getting unsubscribed!
    1
  8982. @ I wouldnā€™t, technically a switch will make the compressor come one but it wont be able to cycle, it could cause the system to freeze up, the fans might now work properly etcā€¦ there are multiple risks involved. Best to fix it properly
    1
  8983. Give import a part a call in St. Louis Mo. Thatā€™s an Eric from the I Do Cars YT channel, he might have one. If not try eBay, itā€™s a good place to find used parts
    1
  8984. Get a used one and avoid paying 5k for a new control unit
    1
  8985. She said hello! šŸ‘‹
    1
  8986. That thing is an ABSOLUTE Beast!!! Iā€™ve seen it in real life and itā€™s impressive!!!
    1
  8987. Prolly not $800 ā€¦. Why does it take so long? There must be a reason
    1
  8988. People are very hurtful sometimes šŸ˜”
    1
  8989. Ā @clbcl5Ā  Shoot me an email plz. The google machine seems to have archived your address....and I can't find it.
    1
  8990. No no no, thank YOU!
    1
  8991. YT doing YT things
    1
  8992. šŸ¤£šŸ¤£
    1
  8993. Ohhhhhhhh
    1
  8994. šŸ‘‹
    1
  8995. šŸ‘‹
    1
  8996. Sheā€™s still with us. She doesnā€™t like to travel so she can guard the house
    1
  8997. Slipping really bad in 3rd. It was setting codes and falling out of gear.
    1
  8998. We donā€™t have to agree on everything, thatā€™s the beautiful part! We can all live in harmony on our own terms!
    1
  8999. Itā€™s one of my older ones, Iā€™ve improved since then
    1
  9000. The cylinder head bolts are the major ones. I believe it's 59lbs first pass, then 90* second pass, and 60* third pass. The bolts are not reusable and MUST be replaced. I think the rocker arms are around 29lbs (but not certain). Perhaps the Google machine can confirm specs and sequence. I use ProDemand or Alldata for specs but you have to have the subscription. Do you have a relationship with a local shop? If so, just ask them for the spec sheet. I'm sure they'll print one for you.
    1
  9001. Hi. Thanks for the message. I've added my Email to my page details. It can be found in the "About" tab under details.
    1
  9002. Believe it or not, I've never gotten that one before.
    1
  9003. Sure can. BTW there is a link at the end of this video on screen.
    1
  9004. Smart move my guy!
    1
  9005. I'll I with back to the future rules. Never was much of a Star Trek fan.
    1
  9006. That's the record so far my man! šŸ¤£šŸ˜‚
    1
  9007. šŸ¤”
    1
  9008. It goes back on
    1
  9009. Cleetus is a YT powerhouse, I donā€™t even think he knows that I exist
    1
  9010. Ā @stevendegoniaĀ  šŸ¤£šŸ¤£ itā€™s an older video
    1
  9011. I will buy this car just so I donā€™t have to work on it!
    1
  9012. šŸ¤®
    1
  9013. No we donā€™t. And nobody could have know till it was too late
    1
  9014. It was kinda folded down behind the battery
    1
  9015. Must be new here. We donā€™t claim this
    1
  9016. Runnier bushing yes, these poly bushings rotate so itā€™s not an issue in this application
    1
  9017. oooh no it works, but it wasnā€™t going to fit in that little space to grease the bushing
    1
  9018. Yea Iā€™m not that smart
    1
  9019. Cmon Chuck gimme a break, Iā€™m doing hurricane things.
    1
  9020. It was built when they used chainfalls to lift things. I estimate at least 2000lb capacity. The harbor freight winch/lift says 1700 lbs on the box, as such I trust that cable to 700lbs with the pulley added. They also have a 2600lb cable lift however I don't think I should be lifting things that heavy on a swinging arm
    1
  9021. Letā€™s do itā€¦ but we have to use a switch relay so it makes a loud click sound
    1
  9022. exactly, no fear of welding the aluminum to the bolt
    1
  9023. The axle boot leak
    1
  9024. EPR to flush and MOA is added with the new oil.
    1
  9025. Thanks!
    1
  9026. No we donā€™t
    1
  9027. Doesnā€™t fit into places with the guard on
    1
  9028. Daniel, icy muss sagen, ich spreche nicht flieBend deutsch, aber Google translate ist unser freund šŸ¤£šŸ˜‰
    1
  9029. It did get a new one b4 it leftā€¦just canā€™t have that
    1
  9030. Itā€™s been a wild ride
    1
  9031. Thereā€™s comedic value in such experimentation
    1
  9032. I didnā€™t say anything ā€œMAGAā€
    1
  9033. Ever been in the airport and TSA comes out with the ropes and poles, blocks a hallway and creates a crowd? Then all of sudden a news crew shows up to report how backed up the airports are? (True story, I was standing there) How about that helicopter crash in Hawaii back in 16 where the news reported radioactive material on north shore beach with hazmat crews? I drove up watching the reports, when I got there, beach was vacant. (I lived in Honolulu at the time) My list of personal experiences witnessing false reporting is quite long. Yes, they have a history of failing report accurately.
    1
  9034. Ā @billiebobbienorton2556Ā  Iā€™ve learned. Nobody is mad at this one, but Iā€™ve caused much anger in the past. I actually considered cutting out the tank destroying discussion, but it went on so long that the video would have been confusing without the scenes. Call it a calculated risk.
    1
  9035. I donā€™t watch the news
    1
  9036. Weird!! LOL
    1
  9037. lol Right!
    1
  9038. Having lived on Oahu, I canā€™t believe I forgot Aloha
    1
  9039. I had a piece of slag fall from am overhead weld once. Went through my jeans and behind the tongue of my boot, from there it proceeded across the top of my foot. It reached my middle toe by the time I got my boot off. That one hurt
    1
  9040. Thank you Chris! šŸ˜‰āœŒļø
    1
  9041. šŸ˜‚
    1
  9042. https://youtu.be/dnVqOuhVykE. I think you clicked the wrong link
    1
  9043. Some, not most. This one doesnā€™t do that.
    1
  9044. Ā @jeffd.8105Ā  never stop learning šŸ˜Ž
    1
  9045. 1-4 one side, 5-8 on the other sideā€¦Fords way
    1
  9046. This Ecm doesnā€™t disable injectors
    1
  9047. Check links in description and pinned comment šŸ˜
    1
  9048. Watch pt 2 &3
    1
  9049. See part 2 and 3 pinned comment or descriptionā€¦ itā€™s the ecm
    1
  9050. No way
    1
  9051. You should show all the times you comment something that isnā€™t true and then get wrecked for it
    1
  9052. Shhh donā€™t tell Scotty šŸ˜Ž (Scotty doesnā€™t know)
    1
  9053. Loads, itā€™s just Toyota
    1
  9054. The stud was damaged. Nut costs approx $3 suds $6 half hour labor $40-$50 times two different wheels means doing that job for free costs the company.
    1
  9055. I record with a go pro
    1
  9056. I hold the patent on it šŸ˜
    1
  9057. Who put shakedowns in brake a video, especially if nothing is wrong!???!
    1
  9058. Well thatā€™s the paradox. better tools make my job easier and that means I can do more work. I can therefore and can make more money then I can have nice things like corvettes
    1
  9059. Joe I love my trolls, they give me an opportunity to offer some advice to newer techs. Thatā€™s why Iā€™m here, I want to share knowledge and wisdom.
    1
  9060. Weā€™ve all been there.
    1
  9061. As Technicians and mechanics we have to purchase our own tools. When it comes to things like machinery fluid exchange machines and scan tools the company is responsible for those. Handtools can very easily become lost and even sometimes stolen. Additionally if the technician does not on the tools they may not treat it with the level of respect that it deserves. Also due to the varying degrees of skill level some folks may not need certain type of tools were others would require them. If it were left the shop owners to supply tools we would have the cheapest thing possible which is not the best tool for some of the work we do.
    1
  9062. šŸ¤£šŸ¤£
    1
  9063. Things that make me go šŸ§
    1
  9064. I was safe from SWAT
    1
  9065. Good morning! ā˜€ļø
    1
  9066. Now that would make a great video šŸ¤£šŸ¤£šŸ¤£
    1
  9067. I assess my surroundings before using the assault blow gun šŸ˜‰
    1
  9068. Iā€™m thinking of an alternative firing order cam
    1
  9069. Itā€™s cold out
    1
  9070. Yea we need to cut down on that habit
    1
  9071. Well ya donā€™t
    1
  9072. Thank you! šŸ™‚
    1
  9073. Thereā€™s a jack stand
    1
  9074. Always pushing the limits
    1
  9075. Words
    1
  9076. Have that battery checked, itā€™s on its way out or perhaps you have a parasitic draw thatā€™s discharging it overnight
    1
  9077. That is called a typo and they're harder to spot than one would assume. You see, the brain naturally skips over those inaccuracies in order to speed up processing time. It does this because there is a sensory delay that the brain compensates for by making assumptions. It's similar to the concept of the brain ignoring the eyes' message that includes the nose. It's irrelevant to the outcome so the brain will ignore it to save time.
    1
  9078. Sure! šŸ‘
    1
  9079. Internal fans on the modern ones
    1
  9080. The cats are feral so we donā€™t see them very often. And Luna, the German shepherd Rottweiler shop dog stays home most days.
    1
  9081. What like a Dollar General version?? That hurts šŸ˜­
    1
  9082. Iā€™ll fight a gator
    1
  9083. Me too. Doesnā€™t make sense. Someone had to have broken it somehow
    1
  9084. šŸ¤£šŸ¤£
    1
  9085. EPR works great to prevent the small deposits. The Dynamic flush a total cleaning process involving heat, time, and chemical. Its purpose is to break down large deposits quickly and remove the sludge. Maybe think of it like a garden hose vs pressure washer
    1
  9086. For the thumbnail
    1
  9087. You sound a little angry here, you good?
    1
  9088. We usually use 5w30 and 5w20
    1
  9089. 5w30 is fine in this climate
    1
  9090. Good content šŸ¤£šŸ¤£šŸ¤£
    1
  9091. I use self lubricating towels
    1
  9092. No way! Those things are mucho $$$$$
    1
  9093. Ā @SilentServiceCodeĀ  oos typo yes itā€™s ā€œrepairsā€
    1
  9094. RainmanRaysRepairs . Com
    1
  9095. The rubber one was making my finger wrinkly and wet
    1
  9096. No billable hours on the work order, no pay for the tech. Itā€™s called flat rate, Iā€™ll talk about it soon.
    1
  9097. Donā€™t work for free
    1
  9098. You missed the last sceneā€¦ gotcha šŸ¤™šŸ˜‰
    1
  9099. Nope . I got the clamps too.
    1
  9100. Ā @stevewarren3051Ā  sry, I wasnā€™t going to drive around that long
    1
  9101. No it was that gold universal stuff
    1
  9102. lol I got that too and the clamps šŸ˜‰
    1
  9103. It happens
    1
  9104. It was outside under the awning, I just blow the leaves away.
    1
  9105. me too
    1
  9106. Make Troy clean it šŸ¤£šŸ¤£šŸ¤£
    1
  9107. Proves thereā€™s no large leaks. Yes itā€™s useless for looking for small leaks.
    1
  9108. Thereā€™s far worse things out there than distasteful movie lines
    1
  9109. Poison
    1
  9110. Ā @clbcl5Ā  two years went by so fast!!! Thanks for being here every day šŸ«‚
    1
  9111. I hope so!
    1
  9112. People drink a lot of coffee, and it sells
    1
  9113. Lol I didnā€™t catch that good eye
    1
  9114. Go to our webpage, email Lauren to schedule appointment šŸ‘
    1
  9115. Theyā€™re 256gb cards, I just had other stuff on there too
    1
  9116. Perfectly said my friend, thank you!
    1
  9117. Different sizes holes and threads on the old one. See pt 1. Link in description.
    1
  9118. The mount is rubber and flexes
    1
  9119. Omg itā€™s brutal in here over this one
    1
  9120. The mount flexes
    1
  9121. Two bolts and tilts I think
    1
  9122. Tips speed is 5mph with this one
    1
  9123. Bc I wasnā€™t thinking at that moment
    1
  9124. Absolutely! Recover it with an AC machineā€¦this is the way
    1
  9125. I stand corrected. I assumed that layers are bonded with some type of adhesive
    1
  9126. OK, now that's pretty cool
    1
  9127. For what itā€™s worth I broke down and bought the premiumā€¦ itā€™s worth the $13 bc I can close the screen and still have audioā€¦bonus no ads. I donā€™t watch tv (cable satallite) so it was worth it for me
    1
  9128. These were Fury Country Hunter M/Ts 37x13.50 20s
    1
  9129. This leads to death wobble, and a bit of CBšŸ˜‰
    1
  9130. šŸ¤£šŸ¤£šŸ¤£
    1
  9131. šŸ¤£šŸ¤£
    1
  9132. First šŸ˜‚
    1
  9133. Ball joints have preload? Ok
    1
  9134. Head in collisions 4ā€ away are totally safe, youā€™re right
    1
  9135. Brutal arenā€™t they? Some people are just jack wagons
    1
  9136. I have the speakers. Do you remember last time I removed the door panels and found the speakers were junk? Time for the upgrade
    1
  9137. Donā€™t put that evil on me
    1
  9138. Seems that you may have just insulted several people with that one
    1
  9139. He left, see the ā€œI quite video
    1
  9140. LMC Truck
    1
  9141. Yup Iā€™m cold šŸ„¶
    1
  9142. Congratulations! No more debt
    1
  9143. noooooo
    1
  9144. Itā€™s a superpower
    1
  9145. Your lack of faith disturbs me
    1
  9146. Lmc Truck . Com
    1
  9147. I got them, background music screwed up the video, I had to cut it up a lot
    1
  9148. No sense in advertising something for free Edit: I know itā€™s clearly visible
    1
  9149. šŸ¤¦ā€ā™‚ļø
    1
  9150. šŸ¤£šŸ¤£šŸ¤£
    1
  9151. I ended up moving them didnā€™t like the routing, it created a pinch
    1
  9152. Dash rattle šŸ¤·ā€ā™‚ļø
    1
  9153. No reason to give away product placement for free šŸ˜‰
    1
  9154. Iā€™m in ur head šŸ˜ˆ
    1
  9155. Thatā€™s a bad day!!!!
    1
  9156. It did
    1
  9157. Itā€™s an incomplete project right now, theyā€™re not wired to supply backup power. Iā€™ll need a battery bank for that.
    1
  9158. Billions and damages, there are casualties in the hundreds and society ceased to function
    1
  9159. I know
    1
  9160. Do what you can to help the folks down south, they had it much worse šŸ˜¢
    1
  9161. All good. I know we have linemen out there!
    1
  9162. We made it
    1
  9163. Florida šŸ¤·ā€ā™‚ļø
    1
  9164. Ā @James-wq1tgĀ  it was
    1
  9165. Little damage to the house and vehicles. Everything else is a wreck
    1
  9166. Hahahahahaā€¦ nope
    1
  9167. The aux tank is full too
    1
  9168. Ā @bryananderson3422Ā  It havenā€™t really left home yet. Itā€™s starting to sink in. I have incredible fatigue today. I canā€™t think and my whole body hurts šŸ„ŗ
    1
  9169. Soo sorry for you down there! I just started seeing the pictures from the area...I'm at a loss. The bike is probably totaled
    1
  9170. They people werenā€™t in it anymore
    1
  9171. Shut upā€¦ do you really think politics matter right now? Go rethink your decision to say that. People died in this.
    1
  9172. Big $$$. Itā€™s in my wish list for sure
    1
  9173. Iā€™d love to have one but theyā€™re big $$
    1
  9174. It was difficult to raise a tattered flag like that
    1
  9175. Iā€™ll be adding an aux nator soon, mine isnā€™t enough for this
    1
  9176. So gross šŸ¤£
    1
  9177. šŸ‘‹šŸ‘‹šŸ‘‹
    1
  9178. Iā€™m booked out for three months and weā€™ve stopped taking appointments. Thatā€™s why I make sure to take me time every couple weeks. You were close
    1
  9179. Ā @forgetfulme1719Ā  I could have just zoomed in to cut the tires out. šŸ˜‰
    1
  9180. Yes I finished it a few weeks ago
    1
  9181. There are no Aliens ā€œnothing to see hereā€
    1
  9182. Works on big leaks but not so much on smaller ones. All of the dirt that accumulates on the evaporator tends to absorb the dye that comes out.
    1
  9183. I noticed while editing
    1
  9184. I can't, not this time. The body shop and insurance company made this call.
    1
  9185. Body shop guys know, thatā€™s on them
    1
  9186. Love it!
    1
  9187. Shhhhh. Donā€™t tell them
    1
  9188. I will learn how to do it that way
    1
  9189. I got it part 3, link in description
    1
  9190. Bot Maker is wise!
    1
  9191. Ā @Puggy42069Ā  Customer states what channel does lots of giggitys, I try to only use them when they really count. I throw a few extras in
    1
  9192. Yea you see what I did there šŸ˜‚
    1
  9193. Negative, It was unlisted and available through a link
    1
  9194. I know šŸ˜‰
    1
  9195. I better rethink the energy that Iā€™m sending out šŸ˜Œ
    1
  9196. I did fake blowing myself up with an airbag once. Folks took it pretty hard
    1
  9197. Now thatā€™s funny! šŸ˜‚
    1
  9198. Me too šŸ˜ž
    1
  9199. Heā€™s squeezed in a few doo dee dooos here and there
    1
  9200. šŸ¤£
    1
  9201. Well I donā€™t take orders from little kids on another continent šŸ¤£šŸ¤£šŸ¤£
    1
  9202. It will never end šŸ˜ˆ
    1
  9203. Ā @bradkayĀ  Closed Thursday Brad, coming back Friday.
    1
  9204. Ā @bradkayĀ Hey Brad, Youā€™re trolling. Cut it out.
    1
  9205. You sure showed me!
    1
  9206. Thatā€™s now how wid works. Weā€™re going to get nasty wind AND it can change direction without warning. Hurricane Ian had an East shift and it drove right up the middle of the state.
    1
  9207. Do not be afraid is written 365 times in the Bible, my take is thatā€™s one for each day of the year. Fear is like hate, it serves no function and should not be carried in the heart.
    1
  9208. Do not be afraid!
    1
  9209. Rainmanapppointments@gmail
    1
  9210. Iā€™m doing that last in case I have to replace the engine
    1
  9211. AC permission denied by ECM due to engine overtemp.
    1
  9212. Fixed
    1
  9213. Bingo!
    1
  9214. Sure does. When ECM sees coolant temp is out of range, A/C permission is denied.
    1
  9215. Yea I know... I'm working on it. Just got a GoPro to record with, and the phone is being replaced also. Can't have crappy production quality
    1
  9216. It's going to be ok. See,I thought the T stat would have been serviceable without the housing. I clearly overestimated GM
    1
  9217. Unfortunately the P0128 DTC isn't a code that is monitored. Meaning that the thermostat doesn't have a sensor to determine if it's working or not. The P0128 sets when the ECM determines that coolant temp doesn't rise in a predetermined amount of time after engine start. Failing to reach operating temperature indicates that coolant flow is no longer regulated. Since the T stat does the regulating the code simply means it's not doing it's job.
    1
  9218. Ā @ritecomment2098Ā  I see that you're suggesting that water in an engine compartment will cause electrical problems. I'm afraid that a wash down with a hose just isn't going to do that. Ever witness a detailer clean in there? They use pressure washers. Unless you drive your car into a lake, water isn't a danger.
    1
  9219. Noooo it's ok bro
    1
  9220. I don't get it
    1
  9221. Ahh you found an older video that's been lost in the YT AI
    1
  9222. Not allowed by the ECM because of entice overtemp.
    1
  9223. Thanks my man! Glad you're here!
    1
  9224. I don't like to leave engines covered in dirt after I service them. They always come in dirty and dusty.
    1
  9225. šŸ¤¦ Sign of the times my friend
    1
  9226. Not me...I know better
    1
  9227. Nope different truck
    1
  9228. Couldn't have days it better. I own hose clamp pliers... They're somewhere in the drawer
    1
  9229. GM Dex cool... It's propylene glycol. The green type is ethylene glycol They dye it red because the two don't mix well together.
    1
  9230. Yes indeed. When coolant temp is out of range, the ECM disables the AC
    1
  9231. You seem to know quite a bit about this situation.
    1
  9232. That's not very nice, Ken
    1
  9233. Nooo. I've been made aware. I'll intentionally try to not sound like Homer
    1
  9234. Indeed they did! šŸ¤£
    1
  9235. Ā @nctaurussho4664Ā  I know. I failed a little. Haven't been making videos long and I forget things. I'm working on it. Feedback like yours helps a lot. Every mistake I am opportunity to learn.
    1
  9236. Ā @davidfitzsimmons8212Ā  Thanks so much. Making these videos has become so rewarding for me. Interacting with you all through chat and hearing that I cause a laugh or two really makes my day!
    1
  9237. Yup the ECM will shut it down if coolant temp is out of range to protect the engine..
    1
  9238. Negative, I didn't realize that the T stat was going to be integrated into the housing.
    1
  9239. Lol not anymore my guy. My Duramax has two, $50 and $80. Crappy thing is that they're the same simple type that we all know and love.
    1
  9240. All good my man... The LS and LTs purge air very fast
    1
  9241. Urgh...sry you're not feeling well. Glad I could help you out! Feel better!
    1
  9242. Thanks for watching!
    1
  9243. Ā @brian8319Ā  šŸ¤£šŸ¤£... No we don't need em
    1
  9244. šŸ¤£. Yea I have to put them back together. .... Wait so you're the guy who chops off wiring harness on used engines.....
    1
  9245. Yesssss! You got it!
    1
  9246. šŸ¤£
    1
  9247. Hahahah
    1
  9248. Hmm good idea šŸ‘
    1
  9249. Last pair in HD
    1
  9250. šŸ¤£
    1
  9251. Ty!
    1
  9252. It was just my big mouth šŸ¤£šŸ¤£ And the brake clean hahahahahah
    1
  9253. šŸ¤£
    1
  9254. All of em
    1
  9255. He was taking about ingenuityā€¦ making something from nothing and being resourceful
    1
  9256. I prefer to avoid drilling bc I donā€™t want to break any cords inside
    1
  9257. Are you saying that I scratched your wheels?
    1
  9258. With careful application of pressure they dig in nicely and do not slip off, itā€™s just my way of doing it
    1
  9259. You said that, not me.
    1
  9260. My freebies only go so far
    1
  9261. Totally obvious!
    1
  9262. Itā€™s kinda common. Some shops and regions are more prone to it then others. But the MO is anyways the same. Show up with a coupon or promo mailer. Wait in the lobby for the oil change. Decline suggested repairs, walk out to car after, walk back in, complain that something is broken, check engine light is on, something is missing or stolen, car is dirty there just goes on and in. They make a scene till they get what they want or realize that itā€™s not going to work. Or they leave without a peep then call corporate and complain.
    1
  9263. Absolutely!
    1
  9264. I know! Right!! Wtf
    1
  9265. Add $4-5 to the cost (not profit but cost) off every Oil change? No can do. Shops lose money on oil services, canā€™t afford to lose more
    1
  9266. My freeness doesnā€™t extend that far
    1
  9267. The roof trusses hit the hood when itā€™s lifted, so I have to close it to lift the car. The oil cap comes off to serve as a reminder that oil isnā€™t installed yet. There is a reason for these things
    1
  9268. Iā€™m glad you posted it anyway!
    1
  9269. Logic
    1
  9270. Yea but I donā€™t have to warranty that šŸ˜‰
    1
  9271. If you watch the video, I did my task while holding a phone
    1
  9272. šŸ˜‰ itā€™s ok šŸ‘Œ
    1
  9273. See pinned comment!
    1
  9274. Fair enough
    1
  9275. 18yr rookie, you gotta get it right šŸ¤Ŗ
    1
  9276. Itā€™s was no charge and an act of self preservation. The customer told me he never had a starting problem and then I find the terminals were falling off. I figured it best to just patch it up. If they complained about something, I had already gone above and beyond. That being said, my free Pro bono work only goes so far
    1
  9277. Yea because when he cans and complains about something, I have proof that I went beyond good customer service to help out.
    1
  9278. Iā€™ve NEVER banged a Ta-Hoe
    1
  9279. I was measuring over timeā€¦huge difference šŸ˜‚
    1
  9280. Bradenton Fl... Visit RainmanRaysRepairs.com for our contact info
    1
  9281. Yea but I was lied to right from the start from this guy. Yes, he was suspect to me
    1
  9282. Ā @chylimzbydziĀ  Dirt on a funnel, from your hands that got on the bottle when the cap was removed. What if thereā€™s small debris inside the oil fill jug? Or some on the filler gun. When you pour oil into the fill shot spout in the engine, that dirt makes it way straight to the pan. Oil pump picks it up and straight to the filter it goes, through the dirty side. Then it goes to the bearings. One works say just wipe it down. But weā€™re talking about debris thatā€™s in the thousandth of an inch size or micron sized. Plus if you wipe things with a towel or rag, they can transfer fibers to the surface being wiped, like a funnel spout. Itā€™s best to let the filter have that stuff before it gets into bearings.
    1
  9283. Nope, it offers the opportunity to allow contaminates into the clean side of the filter. Prefilling is a bad habit from the past that stuck. If it were necessary, we wouldnā€™t have engines with sideways or inverted oil filters. Those are more prevalent in todayā€™s engines
    1
  9284. They were just little impacts
    1
  9285. Scott Shop towels and the glove brand changes all the time. I prefer 5mil nitrile gloves
    1
  9286. No worries Iā€™m good. They canā€™t get past my thick skin!
    1
  9287. Ā @AlessandroGenTLeĀ  unpinned it is my dude. šŸ˜šŸ‘āœŒļø
    1
  9288. šŸ¤£šŸ¤£
    1
  9289. lol, Iā€™ve driven 800hp corvettes, Tesla Tri Motors, 80mph boats etc. This thing doesnā€™t impress me
    1
  9290. I know! I lived in Monroe Mi once upon a time
    1
  9291. My freebies only go so far šŸ¤£
    1
  9292. 8
    1
  9293. You can do that, it messy. If one were so inclined, just use a punch and hammer to poke a hole.
    1
  9294. You have an evil filter. Donā€™t forget to turn the steering wheel to get it out
    1
  9295. Too many to count!
    1
  9296. I did know, it was 8.0qt. Iā€™m nite to this shop and sometimes the oil guns are not accurate. I hadnā€™t used this specific gun yet so I started with 6 just in case it was running fast. Better to be a qt or two under, then over!
    1
  9297. I found it in a used car that we took in on trade, when I worked for the dealer
    1
  9298. Heā€™s on a flat earth
    1
  9299. Ā @joriskylie6857Ā  lol I have been known to ruffle some feathers. Thatā€™s what the HD diesel guys do, check out Adept Ape channel he goes into depth on the subject. But it is mentioned in mfr service manuals from years ago like the chitons catalogs. I havenā€™t seen the subject mentioned in modern bulletins.
    1
  9300. The guy wanted it removed. You must not have heard that commentary
    1
  9301. Those are actually for my protection šŸ˜‚
    1
  9302. Canā€™t do it, modern manuals specifically forbid prefilling filters. Itā€™s allows an opportunity for Contaminants to enter the clean side of the filter.
    1
  9303. Because pre filling oil filters is the wrong way
    1
  9304. Ā @peted5217Ā  The future will definitely be interesting. Iā€™m curious to see how everything plays out
    1
  9305. Check out that Tesla showroom that just burnt to the ground šŸ”„šŸ”„šŸ’Ø
    1
  9306. One bad appleā€¦
    1
  9307. THAT is some serious perspective
    1
  9308. I can totally appreciate that!
    1
  9309. He goes Dooo deee doo doo doo...I can big nasty! LOL. I actually saw that air hammer video after I recorded this
    1
  9310. Tomorrow
    1
  9311. Tomorrow
    1
  9312. Yesssss
    1
  9313. No access port, I looked
    1
  9314. Itā€™s a deep blue, looks purple in the right light
    1
  9315. Thank you
    1
  9316. nope
    1
  9317. It's fine
    1
  9318. It was sunday and we're closed, I was working on my time
    1
  9319. šŸ‘†šŸ’Æ
    1
  9320. No Metro State here
    1
  9321. šŸ¤«
    1
  9322. šŸ˜³
    1
  9323. šŸ¤£šŸ¤£šŸ¤£
    1
  9324. The LEOs actually protect the criminal element of society. Think about it, if law enforcement wasnā€™t around people would take matters into their own hands very quickly. We would go full ā€œeye for an eyeā€ overnight.
    1
  9325. i don't think so, good idea tho
    1
  9326. Look again, theyā€™re in order
    1
  9327. I looked šŸ˜¢
    1
  9328. Itā€™s my fan, I can do that if I want šŸ¤£ besides if I did need to warranty it, send it back without the connector.
    1
  9329. I think theyā€™re really cool and fit perfectly into some peoples lives, and they have no place in the lifestyles of others. I also think the free market would do an excellent job of incorporating them in to modern society.
    1
  9330. I changed them 6 weeks ago
    1
  9331. Thanks šŸ‘
    1
  9332. Thereā€™s always oil leftover after draining. The oil oil will make the new oil dark in color
    1
  9333. The jugs we have are 50/50 mix
    1
  9334. Because it makes it look better
    1
  9335. Reeeeeeee!!!
    1
  9336. I must disagree, i cut the footage bc it was really boring, but i used a pick to remove that little white thing and the connectors still wouldn't connect together. very astute observation I applaud you good sir
    1
  9337. I dunno whatā€™s going onā€¦algorithm changes and things like that šŸ¤·ā€ā™‚ļø
    1
  9338. Yea but people return things that are damaged /defective and the parts store will resell it and it screws the next guy. Kind of like how my open box came and the clips were missing
    1
  9339. You mean more than once?
    1
  9340. Noooooooo
    1
  9341. Thank you for the feedback!!
    1
  9342. Later
    1
  9343. Yea itā€™s a real thing with YTā€¦. Welcome back
    1
  9344. Like actual hell? Is a metaphorical hell?
    1
  9345. Mike DROP!
    1
  9346. yes it does
    1
  9347. I did it for free. Her dad is a fantastic fellow
    1
  9348. Yea it was just too far away
    1
  9349. LOL ...... I know. It's a seriously overused term today. The actual meaning is not lost on me
    1
  9350. Totally a girl car
    1
  9351. Back in my day it was Jordan šŸ¤£šŸ¤£
    1
  9352. I just prefer to ignore them LOL
    1
  9353. send me the video!!
    1
  9354. Thanks Steve! šŸ¤™šŸ˜‰šŸ¤™
    1
  9355. The force is strong with you
    1
  9356. šŸ¤£ I deserved that šŸ¤™
    1
  9357. šŸšØšŸšØšŸšØ Link to PT 2! https://youtu.be/OQXASupcyg0 šŸšØšŸšØšŸšØ
    1
  9358. Yes all the time. But thereā€™s lots of them and itā€™s impossible to get to all of them, but I try
    1
  9359. Email me, address is in my about section
    1
  9360. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9361. I cant help myself.
    1
  9362. brake parts cleaner
    1
  9363. HA! I never noticed that I fubared that one. And this is the first comment that said something! GOOD job! :D
    1
  9364. When the tires get replaced
    1
  9365. Negative
    1
  9366. Manufacturer extended warranties are different than third-party extended warranties. You bought a good one.
    1
  9367. šŸ˜
    1
  9368. Those need a warranty too
    1
  9369. Share it!!!
    1
  9370. šŸ‘‹šŸ‘‹šŸ‘‹
    1
  9371. I mean CPO šŸ¤£šŸ¤£šŸ¤£, but I was thinking of my CPA
    1
  9372. Ā @ralph5476Ā  I take credit cards as well
    1
  9373. Whatā€™s a gagus?
    1
  9374. Addicted to coke
    1
  9375. Ā @tpiii33Ā  Unfortunately his other comments are worse with no possible humor. He really is just being a troll
    1
  9376. Illegalā€¦ whereā€™s my due process?
    1
  9377. Itā€™s not everyone or every dealer, but it happens bro. It happensā€¦ šŸ˜•
    1
  9378. I dont have one, my last set caught fire inside the head and tried to blow up and kill me. Iā€™ve been looking for a set of tanks since then.
    1
  9379. Nah it's fine
    1
  9380. NEVER!!! šŸ¤£ I consider them a play on words really. Technically it fits the content šŸ˜‰
    1
  9381. @wifeunit
    1
  9382. Sureā€¦ but the one between the pipe and the frame would have been nearly impossible. I considered it
    1
  9383. I have a machine on order, no need for gauges
    1
  9384. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9385. Did not šŸ™ƒ
    1
  9386. The fitment was so loose, that a press wasnā€™t necessary
    1
  9387. Why do you think I ā€œDooo de dooo doooā€ the phoneā€¦itā€™s a coping mechanism
    1
  9388. Check follow up video in pinned comment
    1
  9389. Please see update in pinned comment
    1
  9390. Canā€™t always fix it all in one go šŸ˜‰
    1
  9391. They will be
    1
  9392. Pittsburg brand from harbor freight
    1
  9393. Lol no can do... Were saving our ammo šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  9394. Ā @mremery1117Ā  Lol fair enough šŸ¤£
    1
  9395. Libtard really? šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²TrumpšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  9396. Ā @HeatherRiderĀ  Link your video here. I want to see. BTW I've found it best to leave the internet arguing alone. I usually make a pinned post like this one, or just thank them for watching. That usually shuts it down.
    1
  9397. Ā @freestyleskylineĀ  So I'm going to have to invalidate your argument due to the fact that it contains incorrect points. At no point did I say a word about the owner of this truck. That's not your truck is it?
    1
  9398. Ā Craig BauerĀ  BwwaaHahaHaha
    1
  9399. The radiator cap maybe
    1
  9400. Yea way. This guy actually drove this thing to the shop. Needless to say, I declined service on this one.
    1
  9401. You got bud!
    1
  9402. Yes it might seem like that's a good idea, but do we want MORE government control in our lives? Usually things like this truck, for example, tend to work themselves out. Nobody will work on it, therefore it will cease to function and exist. No new laws and government agencies needed.
    1
  9403. I didn't judge anybody. Watch it again. However, in response to your comment I'll just say "ahhh the hypocrite speaks" Furthermore, I will point out the fact that you do not understand the concept of liability, particularly when the publics safety is as risk.
    1
  9404. You're not wrong. I recall the fella who brought me this truck. He was a good ol boy from central Florida. He owned a beef reach.
    1
  9405. šŸ¤£šŸ¤£
    1
  9406. Lol you're right on time. This video got all of it's views in the past two weeks. Unfortunately for the owner, I decided to refuse service on this truck due to liability reasons... And it was a death trap. šŸ¤£
    1
  9407. Hell no buddy. Manager man drove this pile into the shop. We took the video and rolled it right back outside . There was no way I was getting into that thing, and I no chance I was going to attempt a repair. I don't fix liabilities.
    1
  9408. Weā€™re onto herā€¦.
    1
  9409. Line wrenches donā€™t prevent the nut it from twisting the line. They can offer more contact area so the wrench doesnā€™t slip.
    1
  9410. It doesnā€™t, I have checked before
    1
  9411. Ty !!!!!
    1
  9412. Watch some of last weeks vids šŸ™ƒ
    1
  9413. Import direct
    1
  9414. I just like the tool šŸ˜‰
    1
  9415. Nope
    1
  9416. We donā€™t take about 80s cars šŸ˜‚šŸ˜‚šŸ˜‚šŸ˜‚šŸ¤£šŸ’ŖšŸ’ŖšŸ’ŖšŸ’Ŗ
    1
  9417. Both
    1
  9418. You guys do know that I have cam mounts also šŸ˜‰šŸ‘
    1
  9419. Never
    1
  9420. What does?
    1
  9421. They are IF you sent the engine up at top dead center on cyl 1. I skipped that part and just made new references. Itā€™s a corner that saved me 15-20 minutes
    1
  9422. šŸ˜šŸ‘
    1
  9423. Price, the customer just acquired this car and wanted to keep this bill as low as possible.
    1
  9424. Sure did
    1
  9425. I did
    1
  9426. Not sure what happened to the audio šŸ¤·ā€ā™‚ļø I was super upset about it, itā€™s right in the middle of three videos šŸ˜¬ and it kinda wrecked everything
    1
  9427. I did but I didnā€™t show everything, had about five hours worth of footage on this one. Some cuts just had to happen.
    1
  9428. It was rough and worn out typical for its mileage
    1
  9429. šŸ¤Ŗ
    1
  9430. Great engine!
    1
  9431. Facts
    1
  9432. RF impact of some sort, slight bend in the control arm
    1
  9433. Not understanding something doesnā€™t mean one was ripped off
    1
  9434. That could be a world record šŸ¤£
    1
  9435. Kinda, it slightly injured the fingernail area and itā€™s tender.
    1
  9436. Welcome! šŸ˜
    1
  9437. Just my bosses at my former dealership. They chose a scene where I zip tied my phone to a jack stand and used it a a tripod. Citing osha violations and improper use of equipment. šŸ™„
    1
  9438. Then you with go to prison for murder
    1
  9439. Thatā€™s a Japanese car
    1
  9440. Welcome!
    1
  9441. Ummm that cover was to protect the threads while the new parts was in storage and transit ect. It canā€™t be installed on the car, thatā€™s where the joint bolts into the steering knuckle. Sooo yea, I threw it away
    1
  9442. I guess they liked the abuse šŸ¤£šŸ¤£šŸ¤£
    1
  9443. If, and itā€™s big IFā€¦if I were to cook food, it would have to be at a 4-5 star beachfront, and I certainly wouldnā€™t be flipping burgers. Donā€™t ask for your fillet mignon cooked medium or above. (Iā€™m also safe serve certified)
    1
  9444. Welcome
    1
  9445. Itā€™s was a body shop job. I use what they give us.
    1
  9446. Nooo wayyyyy
    1
  9447. šŸ˜‚šŸ˜‚šŸ˜‚
    1
  9448. Not sponsored
    1
  9449. I am, but morally when the labor guide is waaaaaay out of line, I have to adjust.
    1
  9450. Did what? Lied about what the estate said?
    1
  9451. Iā€™m really sorry to have to say this. But you do not know what youā€™re talking about. Go back and watch the disassembly and you will notice that everything went back the way it came out. Are you saying that the Toyota was wrong because you donā€™t like which way the bolts are pointing? After that, google torque limiting stick.
    1
  9452. The point was that I could have billed 7 hrs and didnā€™t. šŸ¤™šŸ˜‰
    1
  9453. Fantastic tools!!!
    1
  9454. No Iā€™m not
    1
  9455. Iā€™m not making a dime šŸ˜‰
    1
  9456. Email Mike at the company website. Constant improvement leads to ultimate success
    1
  9457. šŸ˜ oops
    1
  9458. Right!!! That machine seriously needs to take a welding class!!!
    1
  9459. I dunno, itā€™s a 35-40 hour drive for me. I pulled a trailer from LA to Tampa a few years back, took 3 days of NOTHING but driving and sleeping (in the truck). Never again šŸ¤£
    1
  9460. I have grip and plenty of it, prolly carpal tunnel, I have pain in the wrist
    1
  9461. Right!!
    1
  9462. F
    1
  9463. The big one does. šŸ˜
    1
  9464. All of them. Chris is here too
    1
  9465. Ooohhh stop it
    1
  9466. The earth is not a flat disk under a dome. We are not a snow globe
    1
  9467. But it does, check out Ford Boss Me channel, Rich has been using them for weeks
    1
  9468. Exactly, it adds to the sets, it doesnā€™t replace our other wrenches.
    1
  9469. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9470. Ford Boss Richā€¦ yea we joined forces this week
    1
  9471. What?! I canā€™t take a vacation??
    1
  9472. I donā€™t gamble šŸ¤·ā€ā™‚ļø
    1
  9473. BINGO!!! Been fidgeting all day long
    1
  9474. Donā€™t lose your keyšŸ¤£ or use screwdrivers
    1
  9475. I used to do that and try not to anymore. We have painted floors and it occasionally sends concrete chunks flying.
    1
  9476. Whereā€™s Bot Maker and Brandon Todd?
    1
  9477. You win!
    1
  9478. I triedā€¦not happening this time
    1
  9479. Oh it escalates from what was in the video. Step 2 is hammer the socket on the ground, step 3 is the 3/8ā€ extension through the socket with it in the shop vice
    1
  9480. Glad youā€™re back!
    1
  9481. Itā€™s hard to get the brush into the holes
    1
  9482. šŸ¤£šŸ¤£šŸ¤£
    1
  9483. Twas light trolling on the wp pulley šŸ˜
    1
  9484. And thanks to you too!
    1
  9485. It was just that kind of day šŸ˜
    1
  9486. I donā€™t think so. That feel is bc the compressors are driven by the belt and when they engage, it adds load to the engine. Nothing wrong with installing a higher output alternator though, it canā€™t hurt to have more power, but not necessary unless electrical loads have increased. Like adding e fans or lights stereo/amplifiers etc.
    1
  9487. Sure do!
    1
  9488. Hell no Iā€™m not normal šŸ˜‰
    1
  9489. Iā€™m a rocket surgeon not a Doctor
    1
  9490. 20 ish hours
    1
  9491. I know thatā€™s the joke!
    1
  9492. They have a high failure rate and I understand thereā€™s an updated version. (Not a 5.4 expert)
    1
  9493. I just really donā€™t like them. I have one and itā€™s just not for me.
    1
  9494. I did šŸ¤£šŸ¤£
    1
  9495. Oh that? Itā€™s just a test wire
    1
  9496. That PCB was DOA I was just having fun at that point šŸ˜‰
    1
  9497. It was just a little tug šŸ˜‰
    1
  9498. Simple solutionā€¦get the best of both worlds. Two injectors per cylinder, one Port injector and one Directā€¦.maybe make it dual fuel engine also. With a turbo. I guess thatā€™s not so simple, but would be super cool šŸ˜Ž
    1
  9499. How is a useless it literally sprays a missed a cleaner into the intake air, which then passes directly over the valves
    1
  9500. Itā€™s 2023 the world is upside down
    1
  9501. Sure was
    1
  9502. Time will tell
    1
  9503. Iā€™ll leave those up to you guys
    1
  9504. Bc there was nothing to see except a good tire. Edited for time
    1
  9505. I never thought about itā€¦.maybe 50-60
    1
  9506. Maybe theyā€™re the AMC of Japan
    1
  9507. Check out ā€œpower stroke tech talk with A Rodā€ heā€™s a good 6.7 guy
    1
  9508. Sure do!
    1
  9509. Ty!!
    1
  9510. Old cab style, the smaller trucks had new design cabs in 02
    1
  9511. Edit: šŸ¤£šŸ¤£šŸ¤£ JKā€¦donā€™t swat me!
    1
  9512. In the van
    1
  9513. Agreed, I donā€™t like whatā€™s going on with the controls future project
    1
  9514. šŸ¤£šŸ¤£šŸ¤£
    1
  9515. I probably will, I think everything on this truck needs replaced šŸ¤£šŸ¤£
    1
  9516. Lots of mustard!!
    1
  9517. Wife Unit
    1
  9518. Manatee Co!
    1
  9519. šŸ¤£šŸ¤£šŸ¤£
    1
  9520. Morons!!!
    1
  9521. šŸ¤£ I used an AI tool, time is limited for me right now so I cheated
    1
  9522. Those cradle out jobs DO NOT film well. Too much going on to do it safe and film.
    1
  9523. It seems the machine shops donā€™t clean those anymore when the flatten the surface. Itā€™s twice now that I had to go in after the machine shop for cleaning. I think they just run them through a parts bath and call it good.
    1
  9524. Theyā€™re coming tomorrow to pick it up I think. Lauren will make a video for yall
    1
  9525. Plastic heater core lines
    1
  9526. time will tell
    1
  9527. troy broke it
    1
  9528. We broke it
    1
  9529. Good thing I'm in FL ;)
    1
  9530. Nope
    1
  9531. I'm not greek LOL
    1
  9532. At least we weren't doing A/C work HAHAHAHA
    1
  9533. It was more like bolting a wood post to the floor. Not really construction.
    1
  9534. lol
    1
  9535. Troy broke it
    1
  9536. Ā @outlawpfĀ  It looks like youā€™re looking for a reason to pick that fight. Please donā€™t. Weā€™re not going to have the debate in TY comments. Seriously weā€™re all here to get away from the politics of the 2020ā€™s, Youtube is a place for entertainment. Twitter is for arguing. And there are no sides, weā€™re all Americans. We need to start acting like it because regardless of the politics, this ship is sinking as we speak. We have major problems as a nation and as a culture. Divided we will fall. Now you know what Iā€™m about.
    1
  9537. It's just a T shirt. I should we really make it a taking point? The television does enough of that.
    1
  9538. GOTCHA!!
    1
  9539. I have extra wood, I do not have extra I beams
    1
  9540. DO IT. We made this for all the safety inspectors out there LOL
    1
  9541. Iā€™ve done less safe things on a forklift
    1
  9542. It's now silver/grey
    1
  9543. We've done worse
    1
  9544. We already broke it
    1
  9545. it was
    1
  9546. It's only job is to stay there nothing more
    1
  9547. We can be lazy, we had a forklift
    1
  9548. I'll need to step it up then. Did you catch the one where we drained my pond and then drove ATVs and jeeps through it?
    1
  9549. It's an edited youtube video
    1
  9550. Same truck, we did some oil flushes on it to try and clean it out
    1
  9551. Thatā€™s what I said šŸ¤·ā€ā™‚ļøšŸ˜‚
    1
  9552. Silly law
    1
  9553. I cherry pick
    1
  9554. Ā @clbcl5Ā  Nono Iā€™ve been sticking 4nb into almost every video for months šŸ˜ˆ
    1
  9555. 11? that's a rookie number
    1
  9556. Pantry
    1
  9557. Iā€™ll have to make onešŸ˜‰
    1
  9558. Youā€™ve poked the bear nowā€¦.šŸ¤£šŸ¤£
    1
  9559. I took $1.12 off
    1
  9560. šŸ¤£šŸ¤£
    1
  9561. Yea I know, I categorize things in my head and they forever have that name
    1
  9562. I have other videos of the same job, itā€™s been done a few times.
    1
  9563. Bc parts and labor costs 4 grand to do this job
    1
  9564. Caffeine, stress, heat, dehydration could be anything. Iā€™ve noticed I do that when working, but when Iā€™m relaxed I can hold it very steady
    1
  9565. Yea but I didnā€™t start cackling uncontrollably at an inappropriate time šŸ˜‰. Yā€™all realize she got there with zero votes from delegates, that means that the whole party base didnā€™t have an option to vote for their candidate. ā€œSave our democracyā€ thay say.
    1
  9566. Itā€™s always been the ā€œChrysler of Japanā€
    1
  9567. They were, I fixed
    1
  9568. Iā€™m also šŸ¤” on this one Edit: Iā€™ve had 3-4 like this in the past.
    1
  9569. Bingo
    1
  9570. Sounds like you have an axe to grindā€¦thatā€™s two negative comments that I see here. Whatā€™s on your mind?
    1
  9571. Not yet šŸ˜‰
    1
  9572. Hahahaha!
    1
  9573. Iā€™ll do more better next time
    1
  9574. Games you say?
    1
  9575. He really was an a hole šŸ˜‰
    1
  9576. This is the way
    1
  9577. Lol I donā€™t think he knew that it wasnā€™t my first day
    1
  9578. Itā€™s mail to me
    1
  9579. Itā€™s been Unlisted, you saw it through a link šŸ˜‰
    1
  9580. See pinned comment
    1
  9581. This one isnā€™t posted live yet so itā€™s not available as a suggested video. Think of the links as an early release opportunity
    1
  9582. Itā€™s actually car porn
    1
  9583. Yes you did, I made this video a couple weeks ago, but itā€™s been unlisted and only available through a link that was at the end of part 1. I posted it live today for everyone else. I do that with two part videos sometimes bc I know lots of people donā€™t like to wait after part 1
    1
  9584. Check pinned comment šŸ˜‰
    1
  9585. Yea it was fine šŸ˜°
    1
  9586. I used it in the last VW vid from a couple days ago, itā€™s still here šŸ˜Ž
    1
  9587. Itā€™s been Unlisted, only available through a link. Now itā€™s live and in the mix
    1
  9588. Check pinned comment good sir!
    1
  9589. A cheap one to reduce parts count.
    1
  9590. It was closed
    1
  9591. Itā€™s pressured fuel on one side (at the rail) Then the nozzle goes into the intake manifold where there is vacuum (bc the pistons/cylinders are pulling in air) The injectors are spraying fuel into the airstream in order to mixed fuel and air to be burned. Hope that helps
    1
  9592. See pinned comment
    1
  9593. End of the month
    1
  9594. Where your video on how itā€™s done Mr. smarty pants
    1
  9595. I figured it had a check valve or something in the there keeping flow down
    1
  9596. I felt it when it was connected. (First part of the footage)
    1
  9597. šŸ«” we salute you paragraph man
    1
  9598. The robots are always listening
    1
  9599. I donā€™t like that either, if it were me Iā€™d have to leave the seats up or maybe install a spacer to get the subs off the seat.
    1
  9600. Most of us wonā€™t touch audio equipment šŸ¤·ā€ā™‚ļø Itā€™s not hard just takes times
    1
  9601. I donā€™t like the fitment one bit. Seats have to stay up I guess šŸ¤·ā€ā™‚ļø
    1
  9602. Yes itā€™s there
    1
  9603. RainmanRaysRepairs. Com ā€” In Bradenton, Fl
    1
  9604. Fine Iā€™ll order a phone ringer ā€¦.šŸ¤£
    1
  9605. Surrounded by waterā€¦ the house is on top of a mound. The pond has overflowed onto the driveway
    1
  9606. That dodge 1500 pulled it off
    1
  9607. Chemtrails are real
    1
  9608. šŸ¤£šŸ¤£šŸ¤£ it usually doesnā€™t go like this
    1
  9609. Are you getting hit too šŸ˜ž
    1
  9610. The screws are built in. The walls are concrete block filled with rebar and more concrete. Metal roof thatā€™s bolted to the foundation. Itā€™s a fortress and itā€™s built for this. It will keep us safe inside.
    1
  9611. Ā @eldonhoward7925Ā  lol Iā€™m just being smart assā€¦. But yes claustrophobia can easily set in
    1
  9612. No we just stay outside
    1
  9613. šŸ«‚
    1
  9614. I have evacuated the shop. Loaded it all in a trailer and took it home. I have 15000 lbs of steel parked against the side of my house. We will wake up Thursday to a new world. Will survive.
    1
  9615. Bc catalogues say this are available, the you order it and suddenly itā€™s not available. Declining industry indicator šŸ‘Ž
    1
  9616. Lots of mental distractions that day it happens
    1
  9617. Sent it back. Tank was leaking at the seal
    1
  9618. Only when I bug em to get my parts and sell the estimates šŸ¤£
    1
  9619. Viewer sent it to me. I just hope I donā€™t piss AvE off šŸ˜¬
    1
  9620. Sry slipped up on edits šŸ˜¬
    1
  9621. šŸ˜¬ must have missed it on edit
    1
  9622. Iā€™m now G-
    1
  9623. Ā @GregorydavidMckĀ  šŸ¤£šŸ¤£
    1
  9624. Chinada ā€¦Iā€™m sry, the pendulum will swing again
    1
  9625. Which oil testing kit? The oil pressure test kit that I used on the 5.4 Ford? I dunno specifically which one on Amazon it was, but that is where I got it. If you're talking about oil analysis testing, I use Blackstone labs
    1
  9626. Well that will be a great video šŸ¤£šŸ¤£
    1
  9627. Iā€™ve had a couple ideas
    1
  9628. Should have used the skid steer to push the dumpster onto the truck šŸ¤£šŸ¤£šŸ¤£
    1
  9629. I like that idea. Maybe when Iā€™m finished with project jeep, I can look for a barn find
    1
  9630. I think I knowā€¦ serious
    1
  9631. The matrix is real
    1
  9632. Itā€™s going to be a while before I even look at that Saab
    1
  9633. It shouldnā€™t be, even under vacuum
    1
  9634. I can close it. I just leave it open for airflow
    1
  9635. šŸ¤£šŸ¤£šŸ¤£
    1
  9636. One way or the other itā€™s going to get fixed.
    1
  9637. I'm a Libertarian
    1
  9638. Prolly more of that way paper that I found the running cover
    1
  9639. Not Jasper
    1
  9640. Because they botched the install really bad
    1
  9641. She doesn't always come to work with us
    1
  9642. Lots of them
    1
  9643. I don't. We bill book time per job according to Alldataā€™s labor guide
    1
  9644. Try the link again, it might work now
    1
  9645. We can turn right on red
    1
  9646. It's probably just age in this case, and the fronts were A ok!
    1
  9647. I am a robot
    1
  9648. šŸ¤£šŸ¤£šŸ¤£
    1
  9649. Sry It was the compass
    1
  9650. I think i did
    1
  9651. Predatory customers exist and they know the corporate game
    1
  9652. Someone probably could, not I tho
    1
  9653. Next time come on over, you do one side and I'll do the other, we shall see
    1
  9654. šŸ¤¦ā€ā™‚ļø
    1
  9655. Bc I removed it and cleaned it when it was in the parts washer. Yes I cut that scene out due to time
    1
  9656. Itā€™s called and oil udder (like a cow udder I think)
    1
  9657. I plan ahead as well
    1
  9658. Awww I liked the googley eyes
    1
  9659. Remember when people were microwaving their iPhones to charge them?
    1
  9660. Its my first day LOL
    1
  9661. So wrong!
    1
  9662. Had to do itā€¦. Somebody out there will take it seriously
    1
  9663. Next to the laptop
    1
  9664. YouTube loves audience interactions, itā€™s the only way the algorithm can determine if people enjoyed the content. Naturally YouTube wants to keeps its users happy so it promotes what people like.
    1
  9665. It is now mine
    1
  9666. Well thank you I didnā€™t realize my erroršŸ˜‰
    1
  9667. Thatā€™s just not right
    1
  9668. Itā€™s real, we all saw it
    1
  9669. I dunno I wasnā€™t thinking that far ahead
    1
  9670. Troll the trolls, they need attention too lol
    1
  9671. šŸ¤£šŸ¤£šŸ¤£šŸ’€
    1
  9672. šŸ˜
    1
  9673. Iā€™ve never replaced the engine šŸ¤”
    1
  9674. šŸ˜³
    1
  9675. Because they look awesome šŸ˜Ž
    1
  9676. No no it was inverted
    1
  9677. Youā€™re both right, letā€™s call it inverted
    1
  9678. Ā @CarlosPaz31961Ā  why would you do a half way job by replacing a single torn boot knowing full well that the rest are just as worn as the one that broke. From my point of view thatā€™s a rip off bc you get to keep charging labor over and over again to replace the remaining boots as they fail. One could say that your shop ā€œnickle and dimesā€ customers.
    1
  9679. No Iā€™m aware. CV boots = $10-20 each (x4) plus, Labor charge: remove and replace both axles 1.5hr plus more 1.0hr (for each axle)labor to remove and replace 4 boots with cleaning and new grease added. This totals to 3.5 hours labor to reboot both axles @ $130/hr. Thats $455 in labor plus $40-80 in parts. Or replace both axles at $120 each and 1.5/hr labor for a total of $370. My way wins the value prize plus they get new steel axles with new joints. I deliver a better result for less money.
    1
  9680. High heat application so copper type is used! šŸ‘
    1
  9681. Hit or miss, the rubber parts are very aged and usually need replaced. Have it Inspected to make sure you donā€™t buy a money pit. You might be able to pick one up cheap but for what you may have to put into it you could upgrade to a newer model for ultimately the same price over time.
    1
  9682. The shop carries insurance for anything that I drive that way if Iā€™m in a car that does not have insurance I still have coverage and I believe the law is written where I would not suffer a penalty for operating a vehicle that is not insured however I would be responsible for any in fraction that I committed in a customers car
    1
  9683. Yes does happenā€¦.I would do the same thing
    1
  9684. Get a hold of your local Snap On dealer, or keep looking on eBay
    1
  9685. Definitely! At the end of the day Iā€™m working for retirement, not corvettes. šŸ˜‰
    1
  9686. 50 anniversary edition šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9687. Iā€™ve been installing Bosch O2 sensors for years and then three months later I installed another one
    1
  9688. 2002
    1
  9689. For towing you canā€™t go wrong with that Allison transmission thatā€™s behind the Duramax is in the GM trucks. However Iā€™m biased I have always on GMCā€™s and Chevrolets since I got my drivers license. LOL truth be told itā€™s all junk some of itā€™s just better maintained junk. The street six Cummins is a fantastic engine my issue with dodges has always been the plastic cheepish interior
    1
  9690. Noooooooooo! No corporate chain for me ever again
    1
  9691. Thereā€™s a link in the description for part 3. I stuck on my other channel. āœŒļø
    1
  9692. šŸ˜³
    1
  9693. That weird have also worked. My brain is weird and I do things in strange ways sometimes.
    1
  9694. Nissan donā€™t like it
    1
  9695. There are many tools for different situations
    1
  9696. Wife has a fancy coffee machine that uses the little cups so we no longer have filters
    1
  9697. OK so whatā€™s wrong with it?
    1
  9698. Ā @kenik2023Ā  lol yea I have a few. That means that Iā€™m doing a good jobšŸ¤£ This guy šŸ‘† here is one of my biggest fans/trolls. I think heā€™s a hater that I know IRL.
    1
  9699. oh this is Fl. Speed limits are a suggestion here LOL Except in school zones
    1
  9700. Noooooo!
    1
  9701. I shouldnā€™t. I get accused of ripping people off enough in YT without talking about $$ šŸ˜‰
    1
  9702. Thatā€™s a negative, I donā€™t guess
    1
  9703. Which part? This whole video was made with me tripping on my words. My head really wasnā€™t in the game on this car (not feeling well)
    1
  9704. Yea they do that sometimes
    1
  9705. I guess it was that little vacuum thing that was glued on. I donā€™t think I would call it a string but the customer did šŸ¤·ā€ā™‚ļø
    1
  9706. Ā @chrisbailey5055Ā always šŸ¤£šŸ¤£šŸ¤£
    1
  9707. Toyota has been doing that for years. I guess they donā€™t want debris in the tank
    1
  9708. Rant accepted
    1
  9709. It happens often enough to make ya wonder...I recognize patterns easily and accurately, and I'm noticing a trend
    1
  9710. I can get away with piss šŸ˜‰ and thatā€™s it
    1
  9711. As a product of 84ā€™ Iā€™ll agree šŸ‘
    1
  9712. FR
    1
  9713. act accordingly ;)
    1
  9714. Itā€™s cool. Iā€™m done, Iā€™m sure corporate saw this by now, thatā€™s enough to make a difference.
    1
  9715. It's not my time yet ;)
    1
  9716. Ā @skutahuniai4830Ā  I hear you when it comes to questioning. I say question everything. In all seriousness tho, when it comes to productivity, Iā€™m in good shape. Yes I do end up with cars that are taking up space. I have a jag getting a new sunroof track. Itā€™s been on my flat stall for 3 weeks. PITA projects get worked on between regular work. Same thing goes for bigger jobs like collision repairs. Point is there is always a car down that isnā€™t being worked on for one reason or another. I plan and work around it.
    1
  9717. Ā @skutahuniai4830Ā  thatā€™s why I have three stalls, in case something goes south and we fall victim of o the 2022 affect. I bring loads to the table here, much of which isnā€™t in camera, therefore the bosses and I have a great relationship. Donā€™t worry about the details
    1
  9718. No I donā€™t
    1
  9719. That was in part 2
    1
  9720. Thatā€™s a non issue. The inner rod is free to rotate so itā€™ll center itself naturally.
    1
  9721. nope I don't do sponsored/promos...maybe a free promo for someone, like JM3 Oil Filter Wrench here SEMA this week
    1
  9722. Sure was. I didnā€™t notice till I watched the footage. Next time
    1
  9723. Ya
    1
  9724. Yes they do, and they made one with the 7.3 diesel (I think it was the 7.3)
    1
  9725. Yup we but all of our own tools
    1
  9726. Because autolites have a high profit margin
    1
  9727. hey why is your user name @user... is that generic? I've seen a bunch of @users appearing
    1
  9728. Thatā€™s the thing. It ran fine an hour ago
    1
  9729. I don't think I do, I'll keep an eye out for one.
    1
  9730. $$$
    1
  9731. That's just not accurate. SCR and Urea injection do nothing for power production or economy. In fact the particulate filter actually requires that raw fuel is injected into the exhaust in order to super heat the filter during a regen (cleaning) thus using more fuel with no mechanical energy harvested. My issue with DEF, is that without , the ECM will shut the engine down and limit vehicle speed, and ultimately disabling it
    1
  9732. The cap is left handed threads , the funnel wonā€™t screw on
    1
  9733. Middle East ,Africa, South America and Asia imports donā€™t get emissions gear (to my knowledge) And these are larger markets than folks think
    1
  9734. None of them have it šŸ¤·ā€ā™‚ļø
    1
  9735. Bc we do what we want šŸ¤£šŸ¤£
    1
  9736. You didnā€™t have to reach for the exception to what I said
    1
  9737. and THAT is a problem
    1
  9738. Mine is more agile tho
    1
  9739. If there is no DEF/urea, the ECM will set DTCs. Then it wont regen the particulate filter. With no injection and/or filter regen (there is a huge filter on the exhaust pipe) the ECM will gradually reduce engine output and limit vehicle speed to levels rendering it disabled.
    1
  9740. Our yellow is a universal (universal dye package) the compound is propylene glycol. Fun fact propylene glycol is also used as an artificial food sweetener
    1
  9741. Lol, if you look at my Patreon page, you will see that I donate everything that is donated to the channel or myself
    1
  9742. šŸ˜¬
    1
  9743. I drove a Tesla model S Tri-Motor onceā€¦ Insta Fast! One of the few cars that gave me an uncontrollable smile
    1
  9744. It is. We have an Autel in the shop, and it doesnā€™t even show misfires accurately, and it has a lot of lag. So I got this one. lol $2900 later and I only get I to read codes so far
    1
  9745. Could very well be the same part!
    1
  9746. lol I have a couple trolls around here. šŸ¤£
    1
  9747. Nearly a year ago šŸ‘
    1
  9748. Fix it quick, flashing means active misfires, and misfires wreck catalytic converters
    1
  9749. I knew someone would tell me! āœŒļøšŸ˜‚šŸ‘
    1
  9750. Itā€™s on a lift
    1
  9751. It ash sounded pretty bad
    1
  9752. I donā€™t know about all thatā€¦I learn something new every day!
    1
  9753. Ā @JohnSmith-ug5ciĀ  ok you win, hereā€™s your prize šŸ†
    1
  9754. Yea they were almost new
    1
  9755. A full on fluid exchange/flush Job would have definitely had the fluid pulled through the calipers. But they have to pay for that one. I threw the master cylinder in pro bono because that stuff was just nasty! And it took little effort to make an improvement. Same with the ps fluid.
    1
  9756. No BS, making videos is a second job. Itā€™s 3-4 days a week from 8-11 pm and Saturday too. Not to mention 5 minute opportunities throughout the day. That doesnā€™t count recording while I work. Sometimes I feel like I have to think two hours ahead of what Iā€™m doing just to shoot video. Iā€™ll never be a ā€œviewer impressor ā€œ though. Iā€™m here to share knowledge. šŸ¤™
    1
  9757. Thanks buddy!
    1
  9758. I know
    1
  9759. And donā€™t worry about the trolls. They all need a friend like me
    1
  9760. Background music will generate a copyright claim if I speed it up or slow it down then the algorithm does not recognize the song therefore I wonā€™t get a copyright claim
    1
  9761. Thatā€™s for letting me know, I found another one and changed the link! šŸ‘
    1
  9762. So I'm a Trump voter from FL, I came here to CNN to let you guys know here in the comments, that our media says the same thing about you, and your comments section is the exact same as ours. The real enemies have Americans turning against Americans, families vs families. Corporations, social media, MSM and our own representatives have divided our nation from within, and we're all too arrogant and stubborn to see it.
    1
  9763. Heard about the CNN Meme War blackmail thing. Just wanted to say "Fuck you CNN!!"
    1
  9764. Where is the part where she actually dies?
    1
  9765. Fake house
    1
  9766. Trump Trump Trump Trump!
    1
  9767. Really CNN? That's what you have? Go Trump go! Thank that man for being an All American hero!
    1
  9768. Ok so how many of us are just here to Troll CNN and it's NPC army?
    1
  9769. Ā @ella17734Ā  My wife does my laundry so I don't have to.
    1
  9770. Ā @truthfacts57Ā  Don't forget, the slave owning southern Confederacy was primarily Democrats. The modern South is full of real Americans who are self sufficient, hard working, god loving Patriots would would defend protect and fight for ANY fellow American. These people on the left spit in the faces of every Patriot out there. Let's not forget who ran this country while all the non essential workers were hiding in their living rooms for months at a time.
    1
  9771. Fake news!! F U!
    1
  9772. šŸ˜±šŸ˜±šŸ˜±
    1
  9773. He looks Orange in that lighting
    1
  9774. Screw you CNN.
    1
  9775. Just stopped here from YouTube land to say Fuck you CNN! Fake bias "News".
    1
  9776. That's so scary. OMG
    1
  9777. Oh I forgot to mention... Fake news
    1
  9778. All day long
    1
  9779. Ohhhh shit
    1
  9780. ohhh... everyone else is early and days the same thing.
    1
  9781. Sooo we're not going to get to shoot at people?
    1
  9782. I think americans are DONE submitting
    1
  9783. Hillary is my favorite Democrat. She wants to take our guns, freedom, money and control how we all think. I can't wait to try out her new "fun camps" yay!!!
    1
  9784. on the bright side... when the collapse accelerates, these people will be unable to sustain their own existence and will therefore Darwin themselves out of the rebuilding efforts.
    1
  9785. Some things can't be unseen...WTF was that??!
    1
  9786. Uh oh she started speaking truth.... TIME EXPIRED !!!
    1
  9787. Ā @markportnoy6290Ā  I will
    1
  9788. Ā @patriottime9029Ā  šŸ˜‚šŸ˜‚šŸ˜‚šŸ¤£šŸ¤£
    1
  9789. @Urusovite I support your militia! šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡ø
    1
  9790. @Urusovite My militia and your militia should combine forces. Then our militia will be twice a strong. I have lots of friends who also have their own militias. We could organize a super militia.
    1
  9791. Perhaps we should consider some type of barrier in place to direct and funnel refugees into intake facilities at points off entry. Then we should not have exceptions on eligibility for asylum seekers. It appears to me that this is a manufactured crisis designed to the bring crime drugs and poverty to our streets, flood the low income job market, cultivate a voter base and give away trillions of American tax dollars to latin nations. This is another jab against the Untied States from within, designed to redistribute our global wealth and power. We the People are at WAR against domestic enemies within our own ranks. Talk is cheap. What are we going to do about it?
    1
  9792. Just 2 weeks
    1
  9793. The P@rty is making a move to acquire a huge portion of the residential real estate. They are $tarving out the property owners by allowing tenantS to occupy without payment. They are going to cause mass foreclosures and then swoop in and cover the banks losses in exchange for control of the assets. The $ocialist$ want to control the housing at taxpayer expense.
    1
  9794. Build the wall... Around Chicago
    1
  9795. Why did I have to watch two "vote by mail" adds just to watch this video?
    1
  9796. Fox news šŸ‘Ž
    1
  9797. What do I tell my kids when they grow up? Insanity.
    1
  9798. Ā @asfantomĀ  And thatā€™s the problem, weā€™re dependent on Chinese products, yet we have to change our way of life and suffer through climate restrictions because theyā€™re the primary offenders. You canā€™t even buy an American flag thatā€™s not made in China! The double standard is sickening! This is a result of the past 30 years of labor and manufacturing sellouts to overseas enemies.
    1
  9799. Tulsi... Come over to the dark side. Join us in Patriot landšŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²
    1
  9800. Quick!!! someone get that man armed security before Sleepy Joe calls the Clintons
    1
  9801. Florida doesn't care about covid... It doesn't exist here. Just freedom and beer!
    1
  9802. Patriots, the"planned" protests are a trap. They want to set us up again, call us terrorists and take our guns. Hold the line, stand down, the military has the recipts, the DOJ has the indictments and the NSA has the evidence. Arrests will be made this week. Biden didn't call the guard to D.C. TRUMP DID! The Democrat machine had committed treason against the United States.
    1
  9803. BI-DUMP
    1
  9804. They have stolen our election, and cheated our nation. They demonize, hate and vilify us, they hate our country and our way of life. The new conservative movement is, 80,000,000 Patriots strong and growing. Our movement is bigger than any one man, including Donald Trump. AND they are now forcing us to fight for our most basic of liberties. We will educate them on the true meaning of "not my president" and "RESIST". This is only the beginning.
    1
  9805. They have stolen our election, and cheated our nation. They demonize, hate and vilify us, they hate our country and our way of life. The new conservative movement is, 80,000,000 Patriots strong and growing. Our movement is bigger than any one man, including Donald Trump. AND they are now forcing us to fight for our most basic of liberties. We will educate them on the true meaning of "not my president" and "RESIST". This is only the beginning.
    1
  9806. What are we going to do in 2024 when Trump has to leave office?!
    1
  9807. That's California
    1
  9808. Here's what I make of Obiden....šŸ¤¢šŸ¤®šŸ¤®. šŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øšŸ‡ŗšŸ‡øTRUMPšŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²šŸ‡ŗšŸ‡²
    1
  9809. Ooh this is so bad.
    1
  9810. It's going to be awesome
    1
  9811. The wall is a MANDATE commanded by the people. We must have our wall!
    1
  9812. Ā @bobhawke7373Ā  šŸ¤ÆšŸ˜±OMG they said something mean while playing in Imagination Land
    1
  9813. It must suck to suck šŸ¤£ Biden doesn't stand a chance
    1
  9814. Gun control is being able to hit your target.
    1
  9815. Maybe we should fill in those holes at the boarder wall, then they can't drive through. Our ports of entry are an excellent places to cross. Rumor has it they're safe also. I bet we even have bottled water and vending machines there.
    1
  9816. Because mexicans are small people
    1
  9817. NOBODY had a S Korean Coup/marital law on their 2024 bingo card
    1
  9818. MAGA
    1
  9819. Ā @stephenbeacham9717Ā  Troll go away
    1
  9820. Ā @stephenbeacham9717Ā  Whatever troll
    1
  9821. Ā @stephenbeacham9717Ā  wTF are you babbling about idiot
    1
  9822. Non of you got the memo? Black people can't possibly be racist! Check MTF and Buzzfeed, and every news outlet in the county.
    1
  9823. What I just witnessed was murder. Police are killing civilians because they are told that everyone wants to harm them. They are being briefed and trained to fear civilians, not to serve and protect them.
    1
  9824. If you look closely you can see the strings holding him up.
    1
  9825. I found this video because I just started teaching my 5 year old daughter about a .22 rifle. She shot 50 rounds with my help today.
    1
  9826. Idiots towing overloaded and too fast.
    1
  9827. Garden hose šŸ¤™
    1
  9828. Testing fate to see if I could pull it off with a vacuum šŸ¤™
    1
  9829. https://youtu.be/6fO-tgpXOmc
    1
  9830. I made a part 2 of the repair. That's exactly what I did.
    1
  9831. You would have an annoying check engine light forever and P0420 P0430 codes.
    1
  9832. Sorry, some days just don't offer that opportunity. But I try.
    1
  9833. Negative Ghost Rider. I watsn't broken at the left flange. I know it appears that way due the flickering in the video, but that side was intact.
    1
  9834. I offered to weld it due to the cost of the replacement. It's probably against EPA regs, buried somewhere deep in the endless stream of government red tape, restrictions and regulations.
    1
  9835. Sweet. And thank you!
    1
  9836. I didn't repair it yet. I'm waiting on the owner to decide what he wants to do. I offered to weld it, and also quoted a replacement.
    1
  9837. We see them now on the 20&21s breaking off at the drivers side flange at the weld.
    1
  9838. Ooh I have. No thanks
    1
  9839. Yea that's just the condensed water from the A/C evaporator drain. Good eye.
    1
  9840. Bro I wasn't bitching about anything here. I'll never post a complaining rant. There's way too much of that in the world today. Like I said, the moral of the story is be careful of complacency. We think we know everything someones and I wanted to share how complacency almost got me this time. Check out the video description. Thanks for watching!
    1
  9841. Ya got me!
    1
  9842. I've never tried that one. Learn something new every day. Thanks for the tip!
    1
  9843. Ā @truealchiemistĀ  Both of you guys are right. Circumstances are circumstances. This time the engine and transmission were cold. I got away with this because the only heat was from the exhaust. It would have been a different video if everything was at operating temp.
    1
  9844. Ā @dbongoloid9541Ā  Both of you guys are right. Circumstances are circumstances. This time the engine and transmission were cold. I got away with this because the only heat was from the exhaust. It would have been a different video if everything was at operating temp.
    1
  9845. Ā @scorporsupremacy7948Ā  Ok if the wheel balance is good, is suggest looking for worn steering or suspension parts. That could definitely cause some wobbles. Good luck finding the problem.
    1
  9846. Steering shafts are built in two pieces and are designed to collapse in a collision, so they don't kill you. One shaft fits inside of the other and are usually separated by a plastic sleeve. Sometimes that plastic can become brittle and fall apart causing space between the shafts. This can cause a noise. A competent technician would definitely have to inspect your steering shaft to confirm the cause. Have the wheel balance checked for the wobble/vibration.
    1
  9847. That's what they said about radial tires, fuel injection, automatic transmissions and power steering. Machines are machines, one way or the other, they're going to break.
    1
  9848. You're no wrong about Fords 5.4 that ;love to break manifold bolts. Studs are a great replacement to bolts for that reason. I've always suggested upgrading to studs after a bolt extraction.
    1
  9849. Not exactly. He said he thinks there's an exhaust leak and that transmission work was recently done. I found his exhaust leak. I'm going to weld it together with exact accuracy. I'll make a video of that too. Thanks for watching!
    1
  9850. I miss it too, the interior stripped out right now
    1
  9851. šŸ‘‹
    1
  9852. They get flipped and reprinted sometimes or tossed in recycling. Or Iā€™ll use em for scratch paper etc.
    1
  9853. šŸ¤·ā€ā™‚ļø sorry dude it is was it is
    1
  9854. Ā @usaborn9894Ā  itā€™s a fake account/ scammer. I made a video and a couple community posts about it. Iā€™ve banned about 10 of their accounts just today. Theyā€™re attacking several channels
    1
  9855. All about timing
    1
  9856. āœŒļø
    1
  9857. The loose connection caused my headlamp to intermittently go out. It went out as I was riding just after dusk, I was nearly in an accident due to another driving not being able to see me. Therefore, the bad contention almost made me dead
    1
  9858. Fords clamp down at the bottom of the battery. There is a lip on the bottom of the battery case and a wedge that overlaps it with a bolt going through it.
    1
  9859. Itā€™s made by autel. Itā€™s ok. Not Snap on quality
    1
  9860. Silly me I forgot to post in the description! https://youtu.be/i9NvUXN8vnM here ya go!
    1
  9861. Could be, additional u codes with have pointed me in that direction. I figured it best to knock out the usual suspects first.
    1
  9862. And it is. Every single diagnostic process states check battery terminals for clean and secure connections and verify battery is fully charged and in good condition
    1
  9863. I donā€™t want to sell it. Itā€™s got some bad juju. I couldnā€™t deal with it, if itā€™s gremlins took somebody out. Iā€™ll just keep it safe right where it is.
    1
  9864. Hello!
    1
  9865. Youā€™re here viewing, what does that say about you?
    1
  9866. Ā @Your_Friend_NowĀ  Not much to be ashamed of in my parts and thatā€™s not a Trump thing (dunno how Trump is relevant to the video)
    1
  9867. Just the intelligence of the CA legislature
    1
  9868. Maybe itā€™s just in LA, I heard that when I was there last year
    1
  9869. Bring the action!!!
    1
  9870. I no longer distinguish between different types of overreaching wanna be authoritarians
    1
  9871. You wouldn't believe the people that I pissed off so for. People are mad over it!
    1
  9872. Ā @Your_Friend_NowĀ  You pay more and keep less compared to states without state income tax. Weighed against the higher prices for consumables, real estate, food etc, that 100k isnā€™t going to go very far
    1
  9873. Whatā€™s it feel like to pay taxes šŸ¤£šŸ¤£šŸ¤£
    1
  9874. Why do I need to replace the engine?
    1
  9875. The two fans on the back have shrouds itā€™s not enough
    1
  9876. Pay per view? Whatā€™s that?
    1
  9877. Ohhh noooo , Iā€™ll never ask for money. EVER I might ask you to buy my stickers and t shirts tho šŸ¤£
    1
  9878. Defiantly the car gods. Boss and I are like šŸ¤ž
    1
  9879. lol I saw it, however itā€™s inconsequential so it didnā€™t rank high with my thought processes
    1
  9880. Awww it was nowhere near Scotty Level šŸ¤£
    1
  9881. šŸ˜‰ maybe just a wee bit
    1
  9882. I would love to have a Vega, then ls swap it
    1
  9883. The 3/8 and 1/2 is coming out soon
    1
  9884. Youā€™re looking at the wrong website if itā€™s listed for $240
    1
  9885. 20 years my friendā€¦ I know how tight to make them šŸ˜‰ Not everything hast to engineer perfect.
    1
  9886. Thank you kindly!!! Much appreciated!! ā¤ļø
    1
  9887. I shall continue to troll them!
    1
  9888. Titanium Nitride...they're actually going through a redesign and the gold is going away
    1
  9889. This one doesn't have a MAF, only an intake air temp sensor
    1
  9890. Just dont use the plastic assembly when you do
    1
  9891. Sorry I wasn't paying attention to it
    1
  9892. Ā @TsunauticusIVĀ  I knew this would get weird
    1
  9893. Peteā€™s been busy at the other end of the shop. As for the laptop, everything I said was true. Laurenā€™s reaction was 100%genuine. I know who brought the laptop. (Viewer ā˜ŗļø)Itā€™s like a compound fools joke and it was played on everyone
    1
  9894. šŸ˜‚ I see what Iā€™ve done here
    1
  9895. Like I know you donā€™t like the guy, and thatā€™s ok. I see the good in people. Sharing a persons trials and tribulations (especially those who are exposed to the public) can seriously help and inspire others. There are more positives here than negatives.
    1
  9896. Ā @cayjonĀ  I figured that out yesterday, itā€™s actually really hard bc I donā€™t have any muscle memory on MAC. Last time I used a Mac was in 5th grade
    1
  9897. Running LEDs , fogs and a light bar, the cam didnā€™t pick up the outside light very well
    1
  9898. Itā€™s was early
    1
  9899. Glad youā€™re here! āœŒļø
    1
  9900. Ā @usaborn9894Ā  Lol Nope! Doesnā€™t it have a set of carbs?
    1
  9901. Iā€™m sure youā€™re fine. Hwy time is less wear than city driving (in general)
    1
  9902. Nope
    1
  9903. šŸ¤£
    1
  9904. They came threaded together they have deep pinches on them to lock them in place
    1
  9905. No room to fit in thereā€¦ thought about it
    1
  9906. On every wall
    1
  9907. šŸ˜‰šŸ˜‚šŸ‘
    1
  9908. There are things we just donā€™t talk about šŸ˜³
    1
  9909. Srq
    1
  9910. They have their place for sure
    1
  9911. Like I said, it simply caught my attention. The point is I wanted to reply to it. (Plus folks were asking for a toolbox tour)
    1
  9912. Itā€™s a grypmat. They have many sizes and styles
    1
  9913. My diversion is working šŸ˜
    1
  9914. āœŒļø
    1
  9915. They have excellent customer service šŸ˜‰
    1
  9916. šŸ‘‹
    1
  9917. šŸ˜‚
    1
  9918. It hasnā€™t. Iā€™ve used robinair machines for a long time. I canā€™t say one has given me much grief
    1
  9919. I really do like my company now. I can just do my job without the stress of running the place. They pay me very well and have excellent morals
    1
  9920. Iā€™m already gone! šŸ˜ Check out the newer content!
    1
  9921. Totally fake
    1
  9922. No my FB ws hacked and they messaged everyone that I died
    1
  9923. I donā€™t eat bioengineered food ingredients or food coloring, read your labels
    1
  9924. Theyā€™re in California
    1
  9925. Theyā€™re going up for sale to cover expenses
    1
  9926. Hang in there Chuck!!
    1
  9927. I am a robot
    1
  9928. Not anymore. Weā€™re getting wrecked right now
    1
  9929. Iā€™m still goodā€¦ itā€™s pretty bad right nowā€¦just waiting it out
    1
  9930. šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9931. We have 100mph winds and 110-120 gustsā€¦ nope
    1
  9932. šŸ¤£šŸ¤£
    1
  9933. Everything in your comment is out of lineā€¦ I dont believe in censorship so I wonā€™t delete itā€¦ but you should
    1
  9934. Inside
    1
  9935. Wrecked
    1
  9936. Itā€™s normally dry! Not a creek ā€¦well it is now
    1
  9937. Bolted to the house already
    1
  9938. This is the 1%
    1
  9939. Ā @clbcl5Ā  that one comes last
    1
  9940. Iā€™m editing the impala vid. Working the Nissan and staging the Miata šŸ˜‹
    1
  9941. šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9942. Iā€™ll wash it for you
    1
  9943. Indeed I did, the car is at Toyota now having the recalls done.
    1
  9944. šŸ‘‹šŸ‘‹
    1
  9945. Live free or die! šŸ˜‘
    1
  9946. Yes the newer ones do, these unfortunately do not. Be nice if someone made an updated set that had those features and the buttons to run them
    1
  9947. Every month šŸ˜‰
    1
  9948. Itā€™s not my building. If it comes up for sale Iā€™m interested, but Iā€™ll need to be be here for a year or so before going that direction. Thereā€™s thousands of homes being built between my house and the shop. It could be too far to commute next year which would force me to move the shop. Weā€™ll see
    1
  9949. Probably not šŸ¤£šŸ¤£
    1
  9950. The door locks!!! šŸ¤£šŸ¤£šŸ¤£šŸ¤£
    1
  9951. Look Iā€™ve had this cover since 2013, itā€™s not going anywhere šŸ¤£
    1
  9952. Iā€™ll get some door speakers, then Iā€™ll run the wires to the BCM
    1
  9953. Later
    1
  9954. šŸ¤£šŸ¤£šŸ¤£
    1
  9955. Why would I want at $100,000 truck when my $25,000 truck makes the same money and does the same work. Paid off, no problems and reliable. I donā€™t get how folks buy $100,000 vehicles only to occasionally pick up mulch from Home Depot.
    1
  9956. If I do, how will you see?
    1
  9957. I think it was like 38-40k back in 07. I dunno for sure, I didnā€™t buy it new
    1
  9958. Youā€™re in the payoff phase
    1
  9959. I didnā€™t have a door speaker in my pocket that day
    1
  9960. The door locks!
    1
  9961. Weā€™ll drill a hole through it to measure it
    1
  9962. No chrome
    1
  9963. Bc there are thousands of themā€¦canā€™t respond to everyoneā€¦ I try
    1
  9964. That was water
    1
  9965. šŸ˜
    1
  9966. Thatā€™s NoT the effect I was going for. See my truck actually functions
    1
  9967. I have had similar negative experiences with flagship
    1
  9968. Ā @lutz5021Ā  That's bc I was dumb and posted the wrong link https://youtu.be/my9rk92Fsps
    1
  9969. ???
    1
  9970. Duralast from the zone
    1
  9971. My hello helpey helper was a new guy, but heā€™s not lug nut guy
    1
  9972. Probablyā€¦ there are 100 of them down there. I rebuilt a driveshaft yesterday and shaft parts flew everywhere. The cups had to be removed with brute force and assault hammers
    1
  9973. Right!
    1
  9974. No itā€™s wasnā€™t programmed. Remember the anti theft DTCs?
    1
  9975. šŸ‘‹
    1
  9976. I donā€™t have non-amsoil fender covers šŸ¤·ā€ā™‚ļø Edit: but that product placement was rather clever I must say
    1
  9977. šŸ’Ŗ
    1
  9978. Just a little šŸ™ƒ The aluminum is fine with the heat, it dissipates quickly in the material
    1
  9979. I got the money back for the engine, the customer is losing use of the car, I'm losing time spent on the car...everyone loses in these situations.
    1
  9980. There was a broken off extractor in there also
    1
  9981. ProbablyšŸ¤£šŸ¤£šŸ¤£
    1
  9982. Normally, I wouldā€™ve left that for him to resolve however, this was not easy to do. I think that the recovery from the situation was beyond his current skill level
    1
  9983. The break is over šŸ˜‰
    1
  9984. Didnā€™t bother, I grounded the wire and the buzzer doesnā€™t work, itā€™s been removed
    1
  9985. It takes at least 10 years
    1
  9986. Thank you! Perhaps itā€™s the Netherlands or Germany that has such a regulation
    1
  9987. Germany??
    1
  9988. Ā @BillMalcolm-tn3kqĀ  Al is well my guy, I was just responding with my point of view. I understand your point of view and youā€™re not wrong, I donā€™t consider my POV wrong. Quite a paradox sir.
    1
  9989. Ā @kennybaumann2117Ā  I wouldnā€™t want to replace the LF with the same aftermarket one because itā€™s going to lower the front end an inch giving the care a rake. Not ideal unless the owner wants it that way. The trouble is, someone already replaced the RF with one that didnā€™t match and the way to fix it was to replace the LF as well. The debate on replacing parts in pairs canā€™t be summed up in one comment but the both options are correct depending on the circumstances.
    1
  9990. Its mostly water, the concentrate is flammable
    1
  9991. I watched Jason Voorhees as a child
    1
  9992. Dang I mustā€™ve forgot, to remind myself, to remind you, to not forget, to have a great day! šŸ‘šŸ‘šŸ‘šŸ‘
    1
  9993. Thatā€™s unfortunate
    1
  9994. Is not I could do waaaaay worst
    1
  9995. Use it every day, I run it in a door to direct in fresh air
    1
  9996. It will be soon
    1
  9997. I bought it from him. I do t know if Iā€™m going to fix it or smash it with a monster truck šŸ¤£šŸ¤£
    1
  9998. šŸ‘‹ hello
    1
  9999. I have em
    1
  10000. Iā€™ll make a move on the building when itā€™s time šŸ˜‰
    1
  10001. Theyā€™re good. Slightly sloppy, and I think theyā€™re overrated regarding capacity. The smaller one is a 10k lift, but I think 10k is too much
    1
  10002. Yes it does
    1
  10003. I think thatā€™s a myth. šŸ˜‚šŸ˜‚
    1
  10004. Itā€™s actually a blow gun that I made ā˜ŗļø
    1
  10005. I drove by this morning! šŸ‘‹šŸ‘‹šŸ‘‹
    1
  10006. šŸ˜¬ Iā€™ll need to talk to @AdeptApe about that
    1
  10007. So true! I experienced that when making the cuts. Not fun to get the cut going again after stopping
    1
  10008. You must have missed the reason that this was necessary
    1
  10009. they chose this life
    1
  10010. No itā€™s unlisted. Iā€™ll post it soon. I wanted folks to see the first one before this one gets published
    1
  10011. Why because I got the torqued to 1200 ft lb cross threaded lugs off without damaging the $800 wheels?
    1
  10012. I have seen them once or twice, Really only a couple times in 19years
    1
  10013. Thatā€™s the one
    1
  10014. šŸ¤·ā€ā™‚ļø šŸ¤£
    1
  10015. You would be surprised! We have very soft soil inland. Aaaaand Iā€™ve needed it at a boat ramp bc the seaweed and algae that gets on the ramp
    1
  10016. šŸ¤£šŸ¤£
    1
  10017. Sucks šŸ˜ž
    1
  10018. Itā€™s all good weā€™re on full alert and measures taken.
    1
  10019. Cat 3 forecast, itā€™s coming straight for us
    1
  10020. Trump is sending a hurricane?
    1
  10021. Too hot!šŸ„µ
    1
  10022. I mean yeaā€¦. But you Do have a HUGE desert, it must retain some heat right? At least in the day.
    1
  10023. šŸ¤¦ā€ā™‚ļøLol basic geography has escaped me, I knew that šŸ¤£šŸ¤£
    1
  10024. The compressor dies on the old unit, itā€™s 8 weeks back ordered so I had to get another machine to get through the season.
    1
  10025. Working on a Jeep two stalls over šŸ‘
    1
  10026. I knew that šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ˜Ž
    1
  10027. Negative, Iā€™ve had this phone for about 8 months
    1
  10028. He is I saw that video
    1
  10029. It actually wasnā€™t
    1
  10030. Agreed. Theyā€™re not allowed on the interwebs right now
    1
  10031. YouTube should know better. Itā€™s all a bunch of dudes here, I do t think any of us are going to PP
    1
  10032. Ouch
    1
  10033. šŸ˜‚
    1
  10034. Ā @aixaburlison4Ā  I guess not. I know a Kevin Briggs from lakewood Fl
    1
  10035. Is this the Kevin Briggs that I think itā€™s? The one that I know IRL?
    1
  10036. Blame trump šŸ¤£šŸ¤£šŸ¤£
    1
  10037. Both, the laptop showing up was real, and the phone call and the unboxing. Think of it as a compounding joke played on everyone, including me
    1
  10038. Itā€™s a joke
    1
  10039. I have both. Rainman Ray Out Of The Shop. And Rainman_Rays_Repairs on TT
    1
  10040. Nothing wrong with entertaining all possibilities
    1
  10041. Next think ya know Iā€™m Snowdens new roommate
    1
  10042. Youā€™re not wrong
    1
  10043. Iā€™m working on it, glad way through a video about the boat
    1
  10044. Ā @ianriggsĀ  I did drive it, it was much more enjoyable. What brand were the fist set of brake rotors? Iā€™m curious bc you said they had a vibe from day one. Btw I made a video on ur car.
    1
  10045. Cross that bridge later šŸ¤£
    1
  10046. Yesssss thatā€™s it! It had escaped me in the moment!
    1
  10047. Iā€™ll be looking for you!
    1
  10048. Ā @oigleoystereater2003Ā  I see what you mean. I figure that the little bottle of additive oil and dye made up the difference
    1
  10049. How would that damage the unit?
    1
  10050. Yea Iā€™m on vacation
    1
  10051. Lol not exactlyā€¦ I uploaded it from the shop WI-FI this morning and it took hours! 5mb doesnā€™t upload 4k very well and cell data had no chance
    1
  10052. EXACTLY!!
    1
  10053. It was escaping me in the moment šŸ¤£
    1
  10054. you don't learn to use mirrors, what will you do if the cameras go out?
    1
  10055. I thought I had left it on when I manually actuated it. Maybe I fixed it and didnā€™t realize šŸ¤£šŸ¤·ā€ā™‚ļø
    1
  10056. Itā€™s called Super Scraper. Theyā€™re a little tough to find. I got mine from a tool truck. Amazon has a similar product but the have look
    1
  10057. Who said it was leaking last time?
    1
  10058. Iā€™m also not an astronaut
    1
  10059. I didnā€™t realize that tools made the mechanic
    1
  10060. No gouges itā€™s ok
    1
  10061. Yes itā€™s nasty, I hold my breath and walk away after use.
    1
  10062. It must be universal language amongst us šŸ¤£. I donā€™t watch much of Eric Os work, but I know the man is a legend
    1
  10063. Itā€™s branded super scraper. Kinda hard to find. The closest thing I found was on Amazon
    1
  10064. Gooood eye!
    1
  10065. That makes it the wrong stuff
    1
  10066. šŸ˜‰
    1
  10067. I donā€™t think so, I just do meā€¦.maybe the vernacular comes with the trade. However, I drop in some AvE quotes every now and than
    1
  10068. Thereā€™s two kinds of clips, innies and outies šŸ˜‚
    1
  10069. New one came with new clips that are already installed
    1
  10070. Never stop learning!
    1
  10071. The new regulator comes with clips already installed
    1
  10072. New ones come installed on the new part
    1
  10073. Might have been the omegatron variant.
    1
  10074. I was off a groove on the ac at firstā€¦corrected
    1
  10075. I had it one groove off on the AC compressor. Corrected it. Good eye šŸ˜œ
    1
  10076. šŸ‘
    1
  10077. Do you have TY premium? Premium people donā€™t see adds
    1
  10078. Thank you! Transparency is my superpower
    1
  10079. Yup
    1
  10080. Yea itā€™s annoying. I have to break up the music with editing, change the playback speed or sing along
    1
  10081. I did a lot of waiting for parts on this one, it was in the shop for over a week. I think I had about 4-6 hours into it.
    1
  10082. I was a bit raspy on this one. Low energy too. Might have been the omegatron
    1
  10083. Yea it added 12hp
    1
  10084. Thatā€™s why I want to run an intake cleaner through it too šŸ˜‰
    1
  10085. Oh thatā€™s kinda cool. Havenā€™t seen that before, I think Iā€™ll try it šŸ˜Ž
    1
  10086. Iā€™m just holding the GoPro
    1
  10087. šŸ¤£
    1
  10088. Ā @CFast1990Ā  I figured meter was sufficient to demonstrate šŸ¤·ā€ā™‚ļø Donā€™t Know what to tell you
    1
  10089. Ā @CFast1990Ā  Yup. Solenoid clicked, but couldnā€™t command it off
    1
  10090. Ā @CFast1990Ā  I did toss the new vent valve on just too triple check and not actuation with the old ECM. It was odd to have two faults in the same system. I should have recorded it, but it was an on the fly thing.
    1
  10091. Again, go back to the part where the meter detected the circuit status change when I plugged in the new ecm. Why would the old unit fail to open the circuit and the new unit does open the circuit?
    1
  10092. Eric is the goat
    1
  10093. Itā€™s a princess dress šŸ‘—
    1
  10094. We the People should just stop buying it šŸ˜‰šŸ‡ŗšŸ‡ø
    1
  10095. I am a robot
    1
  10096. All we can do it report them, they really piss me off too
    1
  10097. Get out of my head
    1
  10098. LMAO! Stick around I make a cameo every couple of days
    1
  10099. 3m products šŸ‘
    1
  10100. Indeed it is! Bradenton/Sarasota
    1
  10101. It is 3M
    1
  10102. My innuendos are like a superpower LOL
    1
  10103. Isn't it such a shame that we've progressed to this level? I briefly considered editing that comment out (don't want to be canceled) but then I realized that if I censor myself, they win. It's always worth the risk to do what is right.
    1
  10104. šŸ¤”
    1
  10105. I did, it was low at the bottom of the reservoir
    1
  10106. I didnt know Jims did machine work. I've only ever called them for towing
    1
  10107. The cam falls out of the back with the gear removed, doing it twice
    1
  10108. It was the next day and I received the replacement bearing. The #1 got the right bearing
    1
  10109. Thatā€™s not capitalism. Real capitalism fears the consumer bc the consumer has the power.
    1
  10110. Yes it can be swirled around the valve if the wand is at the right angle.
    1
  10111. I believe they utilize accelerometers
    1
  10112. That is exactly the situation. The prices of goods and services remain constant. The value of our currency is what fluctuates.
    1
  10113. No no no the mains were NOT TTY bolts, I reused the OE bolts. I put a set of ARP's on the cam gear. I said if it were mine I would have used ARP's but we have a budget
    1
  10114. I donā€™t like it either, itā€™s been in the drawer for a couple of years and I only use it for angle measurements
    1
  10115. Thatā€™s funny
    1
  10116. But itā€™s not fried šŸ¤·ā€ā™‚ļø
    1
  10117. Vehicle šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤£šŸ¤¦ā€ā™‚ļø
    1
  10118. Iā€™ve damaged several Gopros welding near them. It usually sparks that burn the lenses
    1
  10119. The turbo will tell us later šŸ«¢
    1
  10120. Itā€™s about 2-3x the length of the video. Ex a one hour video site take at least two hours to edit
    1
  10121. I havenā€™t really needed them much šŸ¤·ā€ā™‚ļø
    1
  10122. I have the 10 with a mic, the high ambient temps and low airflow scenarios are what does it, happens every summer
    1
  10123. They always doā€¦remember the black ones on the early Prius?
    1
  10124. Oops šŸ˜¬
    1
  10125. What if my goal is to have 450000 dizzy viewers?
    1
  10126. A Dr. of Economicsā€¦sounds like 2022 šŸ¤£šŸ¤£šŸ¤£
    1
  10127. I said we didnā€™t charge him. Customer didnā€™t know that it was a TPMS light, he though something was wrong with the engine. So it was written up as a diag.
    1
  10128. Urghh you're right, messed that one up didn't I?
    1
  10129. I just had it installed and I didnā€™t want to max load it on the first go round
    1
  10130. They didnā€™t have it, that was my go to
    1
  10131. šŸ¤£šŸ¤£
    1
  10132. Looked pretty square to me šŸ¤·ā€ā™‚ļø
    1
  10133. Good call, brilliant!ā€¦. Ordering now!
    1
  10134. Agreed. Some of them are more difficult. They are tucked away under the wiper cowl
    1
  10135. If there is air in the lines usually you can achieve a good pedal by pumping it a few times. This one was consistently falling to the floor and in the absence of air in the system that is caused by a bypassing seal inside of the master cylinder
    1
  10136. This video is from long long ago
    1
  10137. Ā @Napoleon_BlownapartĀ  yea thatā€™s right. Those keypads came from a time before everything had remotes. Iā€™ve never owned one so I never saw the appeal. People must have liked them because ford used them for years. I think some models may still have the keypad today but Iā€™m not 100% sure.
    1
  10138. Itā€™s a Ford thingā€¦itā€™s for unlocking the doors
    1
  10139. Fear Not my friend. I assure you that brake fluid wasn't left spilled all over the engine compartment.
    1
  10140. Onto a towel and then it was hosed off after I was done.Sometimes I show this sometimes I donā€™t depends on how long the video ends up being.
    1
  10141. Because I was pressure bleeding/flushing the entire system with the machine. And this master didnā€™t come with the little plastic fittings to connect the hoses
    1
  10142. Closeā€¦Sarasota
    1
  10143. šŸ˜±šŸ˜±. Michigan?
    1
  10144. Iā€™ve been a courtroom once or twice. Documentation is critical!
    1
  10145. šŸ¤£šŸ¤£
    1
  10146. It happens! Not all the time, but sometimes!
    1
  10147. Right away boss man
    1
  10148. I thought I could stretch it on by rotating that crankā€¦nope I tried too it was ugly (deleted scene)
    1
  10149. it has oil in it
    1
  10150. Iā€™ve actually looked into it, and the salary at the tech schools is very low. If I were retired and had other income, I could do it.
    1
  10151. My hero AvE from the great white north
    1
  10152. Negative ghost riderā€¦stained not greasy. Never get lube on the interior.
    1
  10153. Hi!
    1
  10154. You messed video about stained gloves vs greasy gloves.
    1
  10155. I tried asking first, it didnā€™t listen
    1
  10156. Yea it's going to suck!
    1
  10157. šŸ˜†šŸ˜†
    1
  10158. You missed the video talking about oily vs stained gloves
    1
  10159. Itā€™s ok, no brake parts were harmed in the making of this video.
    1
  10160. Not advisable in Fl
    1
  10161. Bc the only stain, and If wiped off with a towel, Oil doesnā€™t contaminate the interior. Skin holds oils like a sponge and it still leaves prints everywhere. If after a wash
    1
  10162. I could launch a bucket of grease out of a cannon at the lemon boy...would that suffice?
    1
  10163. This was preventable. You just have to hose it down to wash off the salt. This trailer never had that.
    1
  10164. I had to just by myself YT premium to stop the ads. Still better than cable tv IMO
    1
  10165. Ya got me.
    1
  10166. They were pumped full with the grease gun through the axle fitting at the end āœŒļø
    1
  10167. Those are trailer parts only.
    1
  10168. I did. There was a lot cut out. The job took nearly 3 hours
    1
  10169. They declined calipers and brackets too.
    1
  10170. Declined. They were beyond expensive
    1
  10171. Agreed. Customer didn't want to replace them.
    1
  10172. Hmm I thought it was a 454 TBI engine
    1
  10173. Itā€™s my first day
    1
  10174. Ā @DonsJunkmail-vg1wtĀ  šŸ˜‚
    1
  10175. šŸ¤” never thought of that
    1
  10176. I like to partayyy
    1
  10177. We donā€™t speak of it šŸ˜‚šŸ˜‚šŸ¤£
    1
  10178. Rays Auto Clinic in Bradenton Fl
    1
  10179. Fords have those, itā€™s a keypad to unlock the doors. I put the code and doors unlock
    1
  10180. I already have the crank pulley off, I might fix the pin flaws while I'm in there
    1
  10181. Bro I use this truck once a year, this was it
    1
  10182. Sure, but I don't want to use it
    1
  10183. Ā @oldk4tzĀ  šŸ¤£šŸ¤£šŸ¤£
    1
  10184. Get out of my head
    1
  10185. šŸ¤£šŸ¤£šŸ¤£šŸ˜‚
    1
  10186. Email me
    1
  10187. Later, It's here early
    1
  10188. I'm operating it because I own it, I own it for when I need it, Today it was needed. I can't really figure out what it is that that you're trying to say
    1
  10189. Well the lift did catastrophically fail, it doesn't work anymore
    1
  10190. Cable is only a few months old so I dunno
    1
  10191. Thatā€™s just below the belt
    1
  10192. Absolutely!
    1
  10193. šŸ‘‹
    1
  10194. Noooo
    1
  10195. Reeeeee
    1
  10196. Thatā€™s paint/powdercoat on the gooseneck hitch. Itā€™s just flaking off. Looks like a crack tho
    1
  10197. I thought it was pretty good šŸ¤·ā€ā™‚ļø
    1
  10198. I could have misspoke, theyā€™re around $4-450 each. I have two.
    1
  10199. I routed them where they go. Not changing things.
    1
  10200. Neither do I
    1
  10201. Not a hammer ā€¦ā€linear impact driverā€ and yea I can do that. No harm no foul. Didnā€™t extended mechanical limitations of the item being persuaded
    1
  10202. Thanks!
    1
  10203. I dunno if those do or not. They were OEM from Isuzu, thatā€™s just what it originally came with
    1
  10204. I really donā€™t know. Iā€™ve had this thing for many moons and I forget where I came from.
    1
  10205. Forcing it off with pliers or something would have broken it. Hence concentrated the liner impacts
    1
  10206. Yes I showed the broken tabs, the last time it was removed the bolts were left loose too
    1
  10207. I canā€™t check again, the car is gone. šŸ¤·ā€ā™‚ļø
    1
  10208. I think was an optical illusion
    1
  10209. I did
    1
  10210. Lol šŸ˜‚
    1
  10211. In surrey I confuse. Iā€™m still out sick and I didnā€™t have on opening scene for this forage. So I used my personal truck for background for the into audio.
    1
  10212. Itā€™s a Liberty, I goofed. Still have rona brain
    1
  10213. Your right I totally misspoke on that one šŸ˜‰
    1
  10214. lolā€¦I stuck that video in so I could record intro audio. The spark plugs were on a jeep 3.7l v6
    1
  10215. šŸ¤£
    1
  10216. So sorry to hear that my friend! šŸ˜¢ Prayers for all of you.
    1
  10217. I donā€™t tow for customers so itā€™s never been a priority. I have this truck for when I need a huge truck.
    1
  10218. Granny shiftin like I should
    1
  10219. I tow very heavy things
    1
  10220. Iā€™m a pre emissions and pre(GM)bankruptcy truck. Thats the reason I still have it and the reason I bought it. Itā€™s the last of an era. Built not bought, she will be a new truck when Iā€™m done.
    1
  10221. Iā€™m a tow hobbyist šŸ˜‰
    1
  10222. I know itā€™s very NOT right and I was very concerned over it at the time. I had chains in place in case I lost it diluting a pull. Thats no excuse for a clear problem that could be dangerous. Realistically, I need to re-spool the whole drum.
    1
  10223. Ā @rmacturkĀ  Lol not prying at all, my reply was meant jokingly. šŸ¤™
    1
  10224. I don't want to talk about it
    1
  10225. Ā @paulhall1239Ā  thx buddy. I try to keep my world a good place to be. They say to ā€œbe the change that you want to seeā€
    1
  10226. It is if you let it soak in
    1
  10227. Iā€™m going to drive it and recheck DTCs and data first
    1
  10228. Found out that it was ok
    1
  10229. K
    1
  10230. Yea but I donā€™t ban people. We have the right to our opinions.
    1
  10231. Thx my guy! šŸ«‚
    1
  10232. The video wasnā€™t about fuel injectors or corn dogs šŸ˜‰
    1
  10233. The lawyers win everyone else pays
    1
  10234. It happens all the time, part of doing business.
    1
  10235. And thank you too!
    1
  10236. šŸ¤£šŸ¤£ bring it!
    1
  10237. See pinned comment thread
    1
  10238. Or maybe it was a bunch...read bro
    1
  10239. šŸ¤£
    1
  10240. Dorman is coming around tooā€¦ itā€™s amazing what a little exposure can do!
    1
  10241. Truth!!
    1
  10242. Now I can get sued by Racetrack instead šŸ¤£šŸ¤£šŸ¤£
    1
  10243. šŸ˜›šŸ’ŖšŸ’Ŗ
    1
  10244. But I did say ā€œthis is what I readā€ to that world have been a tough one on slander, at least thatā€™s how I felt about it. I do realize that itā€™s a thin line, but thatā€™s my nature. My big mouth is what got me here to begin with, no need to muzzle it now
    1
  10245. Iā€™m good šŸ™‚
    1
  10246. We are just mammals right
    1
  10247. Letā€™s inform them better!
    1
  10248. šŸ¤£šŸ¤£
    1
  10249. Thank you!!
    1
  10250. All good bro!
    1
  10251. Im saving mine right now
    1
  10252. šŸ˜†
    1
  10253. Shhhhh šŸ¤«
    1
  10254. It had a slightly sensitive info on it. Not a big thing, but didn't want to broadcast it
    1
  10255. I know that I have
    1
  10256. Ā @brianevans4525Ā  ya know Iā€™ve never heard Eric say it. I canā€™t say that I watch all of his videos, but havenā€™t heard it in the vids that I have seen. šŸ¤™
    1
  10257. Ugga duggas are a standard industry term šŸ¤£
    1
  10258. Ā @ryanmitchell4266Ā  Yea, thatā€™s the point of the video. The guy wanted what he wanted, and thatā€™s what I did for him. Maybe he shops Costco and decided to get the rest dic done there. I but my tires at Costco even though I work in shop that sells tires. Why? Price. My shop is running a promo for brakes right now. Maybe thatā€™s why he bought them. Who am I to decide where people buy a product. I evaluate and make recommendations. I donā€™t make the decisions, the customers do. As for omitting details, do you really thing that every nano second makes the cut into a video?
    1
  10259. Ā @ryanmitchell4266Ā  If tires are never rotated, you will see accelerated edge wear like this. Two tires do all if the turning work, consequently the edges live short life. And it appears that you didnā€™t watch the video. The customer wanted the brakes, and didnā€™t want the tires or wheel alignment. (Out os spec suspension alignment will also cause severe edge wear) Nobody shot the ball joints, those were fine.
    1
  10260. Or failure to rotate...ever
    1
  10261. Itā€™s was a 65lb stick. Brought it up to 90lbs with the wrench
    1
  10262. I live on the wild side! šŸ¤£
    1
  10263. That light is dead to me. When it falls I ignore it. Itā€™s time for it to take care of itself.
    1
  10264. Mine is a blue point. Thereā€™s a link in description for a similar tool on Amazon
    1
  10265. Ā @patrickbuick5459Ā  Correction: I would on a northern car or one exposed to road salt. Down here it is not necessary and most manufacturers discourage the practice
    1
  10266. I know. I donā€™t do that
    1
  10267. In my drawer
    1
  10268. šŸ˜³
    1
  10269. Yea, but you see what I did there šŸ˜
    1
  10270. That means that itā€™s working!
    1
  10271. Believe me when I tell you it was long and BORING and not much to see.
    1
  10272. Thatā€™s a different Monte Carlo, itā€™s getting new brake lines
    1
  10273. Bc as soon as I can drive my truck agagin, the Tahoe is going back to its parking space
    1
  10274. Yea the other guy ws troy, he quit a few weeks ago
    1
  10275. Import direct seems to be of good quality and Advance Auto has a line call Frontline, I have frontlines on my truck and theyā€™re doing very well so far. Not much dust and no noise so far
    1
  10276. Excellent question! Both inverters have built in fans AND I have some vent fans that will mount in the box to circulate fresh air. They are not installed yet
    1
  10277. Good thing I donā€™t gamble or do party powder!
    1
  10278. I donā€™t waste money
    1
  10279. Ooh sorry šŸ˜¬
    1
  10280. Mehh šŸ«¤
    1
  10281. Lol no that was sarcasm šŸ˜…
    1
  10282. This was tough edit, I had several screwed up shots šŸ¤·ā€ā™‚ļø
    1
  10283. The bulb takes less wattage, but not the ballast. Clever marketing at work. And I think Honda lamps use a relay not a driver in the BCM
    1
  10284. Youā€™re right they do. But these bulbs have a driver to run them. I didnā€™t measure the bulb voltage to find out, but I bet they run 36-48v. Those flat little rectangle boxes in line with the bulbs are the drivers that step up the voltage from 12v. I bet theyā€™re inefficient in doing so, thus needing more power, negating the power savings of the LEDs themselves!
    1
  10285. I used the maxi fuse on the battery cable
    1
  10286. I knowā€¦had copyright problems with this oneā€¦sorry
    1
  10287. šŸ‘‹ Brandon
    1
  10288. Thanks!
    1
  10289. I think the vast majority of vehicles work like that. I think the only way to defeat it is with programming or manually running a new wire and a new switch straight to the fog lights
    1
  10290. That converter doesnā€™t šŸ˜
    1
  10291. Those were Snap on. Really good tool, and really expensive. Like $65
    1
  10292. Driver not the lamps, these lights had a driver built in to step up voltage to 36v for the light bulb
    1
  10293. Gotcha!!
    1
  10294. Those are Snap on Pliers. $65.00 I love them!
    1
  10295. I used the fuse on the battery cable. It was the main vehicle fuse. There was no way I was going to use an inline 30a blade fuse or something. If that were to go out while driving at nightā€¦.. Thatā€™s also the reason I used thick wires to power the relays. Everything needed to be trouble free.
    1
  10296. Never again, Iā€™ve learned
    1
  10297. Uploading problems. Very poor internet last night and this morning
    1
  10298. We had a chat about how to not get dead. This is how we learn sometimes
    1
  10299. I considered it, but decided against because of how tight the cap appeared to be. I checked it out on the drivers side. I didnā€™t feel I could get out off. And even if I could, it wouldnā€™t fit through the center cap hole and would have been in the way.
    1
  10300. No I tried that, no working
    1
  10301. Non sub huhā€¦Iā€™ll get you šŸ¤£ Good advice sir. And thank you!
    1
  10302. Little but if sand paper and clear coat in a can
    1
  10303. Got it
    1
  10304. Cool story bro
    1
  10305. I fixed it. And here ya go https://youtu.be/W8jw2kwJ4oE
    1
  10306. You must not have watched the video šŸ¤”
    1
  10307. Brahā€¦I got it like that
    1
  10308. No itā€™s not mineā€¦but I have some pull here. Btw Iā€™m not actually going to fire the guy. I was just pissed bc the situation kept getting worse
    1
  10309. Tried that, no dice
    1
  10310. I love the welding method
    1
  10311. Yea it got a little scorched. I side sandpaper to care of it. It was a necessary evil
    1
  10312. Ā @depressingducks4382Ā  rainmanraysrepairs @ gmail
    1
  10313. Did you notice the angle when I was impacting? I was mostly applying force to the nut, no so much the stud. Thinking though, I bet itā€™s possible to smash the steel making it more dense
    1
  10314. I started off that way with a prybar but it was leaving indentations in the spokes so I pulled it out
    1
  10315. 30 miles East of Sarasota Bradenton...It's coming right for us
    1
  10316. It already shifted course, I'll be getting three different wind directions
    1
  10317. already done
    1
  10318. noooooo!!
    1
  10319. Yes!
    1
  10320. not really, I'm having fun
    1
  10321. Theyā€™re for my back porch, itā€™s only a year old so it hasnā€™t seen a storm yet
    1
  10322. It's fine, I burned up the extra 1/2 gal on the way home
    1
  10323. as we speak
    1
  10324. every few years
    1
  10325. It's ok. Kids are just being kids right now. We know how to prep and no one is panicking. Tomorrow is going to be a different story, the storm isn't here yet.
    1
  10326. It's $340 in plywood or $20,000 in damages. No wealth in a disaster scenario dude
    1
  10327. HAHAHAHA, i'm going back
    1
  10328. tap cons later for extra security
    1
  10329. Thx dude
    1
  10330. Theyā€™re safer in my possession, Iā€™m inland
    1
  10331. Iā€™ll make a video
    1
  10332. tractor supply
    1
  10333. Who am I to tell people what to do? But I did take the opportunity to advise himāœŒļøšŸ˜
    1
  10334. I started with a three year old Motorola phone with a scratched up camera and shitty audio. lol donā€™t believe me, go look at one of my videos from a fee months ago. Skip the new camera and get an iPhone bc it has iMovie and itā€™s a good editor. (Btw I never had an iphone b4 and it sucked learning how to use one after android)
    1
  10335. Nope
    1
  10336. āœŒļø
    1
  10337. Yup!
    1
  10338. Yea I had a knock sensor problem and they didnā€™t want to fix it
    1
  10339. No it wasnā€™t me on the first time around. I couldnā€™t determine why it was leaking again. Everything looked good, perhaps as part defect
    1
  10340. šŸ˜œ
    1
  10341. And / or the oil pan
    1
  10342. Valve cover, oil pressure sender (maybe) or the rear crankshaft seal. The rear seal is petty common and often overlooked
    1
  10343. i should get them to send me a commission lol
    1
  10344. šŸ¤£ no way, not I
    1
  10345. Yes they didnā€™t want to fix it, it needed a knock sensor
    1
  10346. Knock sensor circuit highā€¦They didnā€™t want to do anything about that
    1
  10347. Thatā€™s an easy one! I hope I get to do a pan reseal on a 6.6 DURAMAX 4x4
    1
  10348. šŸ‘
    1
  10349. Yes it is actually. Iā€™ve grown fond of rigid. Theyā€™re built well for the price, yet cheap enough to replace if I destroy one. Iā€™ve broke one mini impact driver and one drill. Both times was because I was abusing them
    1
  10350. I cut a piece out bc someone was talking
    1
  10351. šŸ¤£šŸ¤£
    1
  10352. šŸ˜‚šŸ˜‚
    1
  10353. I made mention of shooting in some extra oil shortly after the spill
    1
  10354. šŸ˜
    1
  10355. Thereā€™s a few around here, not as common as they used to be. Many Prius people have Tesla now
    1
  10356. šŸ‘šŸ‘
    1
  10357. Good morning!
    1
  10358. šŸ˜‰
    1
  10359. You missed the part where I tried to compress the pistons on the front, and they didnā€™t retract. I guess your comment would valid if you knew what you were talking about
    1
  10360. šŸ¤™šŸ˜‰
    1
  10361. Yea they say SCAT Sarasota County Area Transitā€¦I know
    1
  10362. Not really, itā€™s a trend this year
    1
  10363. Now that you mention it, canā€™t think of a time when I replaced one either.
    1
  10364. You missed the part where I greased the wire boots šŸ˜‰
    1
  10365. I doā€¦.weird that you know this
    1
  10366. I have dubbed it Rays Auto Clinic ā€¦. Fancy huh? Hahahaha
    1
  10367. no. I know. it has no tools to set things up properly, and it's been abused. community equipment often ends up like this
    1
  10368. I like to do dangerous things very carefully šŸ˜‰
    1
  10369. There are rules to the internet. NO NOT show welding, soldering, using a torch, I'm adding hydraulic press to the list. lol
    1
  10370. Agree 100%
    1
  10371. I absolutely ā¤ļø Eagle River. We go up every year!
    1
  10372. Thanks it was 4am and my tired brain didnā€™t even see it!
    1
  10373. Tired brainā€¦ I fixed it! Thx
    1
  10374. Make my day Punk! šŸ¤£šŸ¤£šŸ¤£
    1
  10375. Iā€™m so sick of ā€œTrump thisā€ and ā€œTrump thatā€ Seriously NOBODY cares, please discuss something other than hate for a president. Do you hear everyone whining about Bush or Obama?
    1
  10376. Itā€™s not safe here for them either
    1
  10377. I never said anything political or divisive nor did I use and ā€œbuzzwordsā€ I agree that there are bad cops and corruption is REAL on ALL levels of government. My point was that society will not tolerate crime in the absence of law enforcement. It just an alternative point of view that should be considered.
    1
  10378. Thereā€™s come good money to make in diesel and thereā€™s a massive shortage of talent. Some of the local dealers are paying 50-60/hr
    1
  10379. šŸ¤£šŸ¤£šŸ¤£
    1
  10380. Donā€™t go yet, doing that next week
    1
  10381. I work on other things also when Iā€™m waiting on parts or approvals etc. The 10+ hour jobs donā€™t often receive full attention because I canā€™t stop everything else bc a large job sold. You canā€™t really plan for these bc when they come I we donā€™t know what the issue will be. Another limiting factor is that I have to run the business too. No Iā€™m not wrenching all day every day.
    1
  10382. Cranberry Lake!!!!
    1
  10383. we like the cranberries
    1
  10384. It all circles back to printing $$ to pay debt and diluting the value of the dollar. As the dollar becomes worth less, we need more of them to pay for goods and services. Itā€™s a downward spiral that starts with financial policy and ends with hyperinflation. In the mean time we receive sub par products that have no value, thus compounding the problem. Consumer confidence is low and spending is high. Wages donā€™t follow pricing like it should, and the middle class is being destroyed as we are being made into debt slaves.
    1
  10385. You can sub twice at the second channel šŸ˜‰
    1
  10386. Ā @NixUgriBugriĀ  Iā€™m bothered by it because Iā€™m old enough to see how the company is taking advantage of people. And I donā€™t like it.
    1
  10387. Ohhh I vote with my dollars! Big time!
    1
  10388. Yup!
    1
  10389. Ā @bcad4066Ā  I literally welded steel plates to the tank, did you see?
    1
  10390. What was clickbait?
    1
  10391. Well it didnā€™t come with any šŸ¤·ā€ā™‚ļø
    1
  10392. No the bracket hits the valve cover
    1
  10393. Ā @tjbrowerĀ  She was a ridgeback/curr mix. About 65lbs at her peak.
    1
  10394. You must have seen the AC water draining from the evaporator. Didnā€™t hurt the coolant lines
    1
  10395. Nope
    1
  10396. I always reuse stock manifolds. Iā€™ve ported them with a flap wheel to get better flow. But IMO theyā€™re not with the trouble on a daily driver. I agree the gains my not justify their existence
    1
  10397. Air conditioning water from the drain
    1
  10398. It reacts to UV but itā€™s still green to the eye
    1
  10399. I know who youā€™re talking about. That guys whole channel is about drama and bashing other people, heā€™s not the sharpest spoon in the tool shed
    1
  10400. You must be new here
    1
  10401. I thought it was at first šŸ¤·ā€ā™‚ļø
    1
  10402. Nope not a Karen
    1
  10403. We buy in bulk itā€™s cheap, and I also buy some/most of own supplies.
    1
  10404. Lol no, I buy my own šŸ˜‰
    1
  10405. šŸ¤£šŸ¤£šŸ¤£ this must have been your first time here. You missed the play on words. The title is legit watch the rest
    1
  10406. Lol, I thought it was half of a v8ā€¦ Learned it was a 6 later šŸ¤·ā€ā™‚ļø
    1
  10407. šŸ¤£šŸ¤£šŸ¤£
    1
  10408. Ā @gerard4444Ā  what plate are you talking about?
    1
  10409. What plate?
    1
  10410. Thatā€™s why I run away for air
    1
  10411. Itā€™s on me
    1
  10412. I went from auto work to restaurant work when I moved it Fl long ago. Then back to car work after a year or two. I needed to have some fun and meet people when I moved. Working at a shop wasnā€™t the way.
    1
  10413. šŸ˜‰
    1
  10414. Lol no not at all. Recording error, I didnā€™t film it and failed to mention it later
    1
  10415. Not the same reeeee but it does fit the bill šŸ¤£
    1
  10416. You have identified a pattern šŸ¤£
    1
  10417. Find cylinder 1, that while row is bank 1. I think thatā€™s the drivers side on the 4.7. Follow the exhaust down and you will see it in the pipe somewhere close to the engine near the exhaust manifold. Sensor 1 will always be upstream of the cat converter sensor 2 is downstream of the converter
    1
  10418. I donā€™t have any sponsors. lol it was a ratchet neutral drop
    1
  10419. No, shop air is only used to empty the machine after use
    1
  10420. šŸ‘‹
    1
  10421. Bigotryā€¦No. But yea I was talking about Rodney King Didnā€™t say Roger? Ooos
    1
  10422. How?
    1
  10423. How?
    1