Comments by "bobbg" (@bobbg9041) on "Used oil BACK In: Oil Change 2.0" video.

  1. My kids car had some rubber screw and a toggle clamp for a drain plug, I take it stripping dran pan screws is a comon problem, and what do you do if you cant get a replacement part? I've seen a thumb screw used on an excavators, it seems to me you could take the pan off drill out the threads add a plug cover with a drain hole you turn but don't remove this clamps on the inside and outside to seal. And the new center drain has a rubber dust cover plug you put it in. This device would cover any hole in flat metal and be a perment replacement part. You can also add a hose onto it to run all the way down to a drain pan. As far as reuse the oil. Yes but filter it with a coffee filter before you put it back in the motor or use a magnet to remove any metal threads from going into the top of the motor and doing dammage. You cant just pour it back into the motor. You can pump it back into the oil pan. Becuse its going to pump threw the oil filter. As a side tool a machine to dbl filter used oil into a 5 gallon container to reuse, the pump pushing the oil past 2 oil filters. That short use its not broken down by carbon or gas. Silly me, someone makes one. Fumoto valve.
    1