Hearted Youtube comments on Discovering Skills (@DiscoveringSkills) channel.

  1. What I want to know is how in the hell do you prpperly weld the coolant passages you can't get to. There is no way that head won't leak coolant internally after this so called repair.
    387
  2. I make this comment as a retired toolmaker and design engineer who still uses a metal shop (at my local Menz Shed) and I can say that I am really quite impressed by the workmanship in this video. The freehand gas-axe work was beautiful — especially cutting out the holes for the big pins. I even learnt something new — I have never seen a lathe used to line bore like that. The positional accuracy wouldn't have been great, but it would have been good enough, and the hole sizes would have been more than OK. Even Kurtis at Cutting Edge Engineering uses a hammer to adjust the cutting tool when line boring, although he does have a DTI to get closer tolerances than these guys would have managed. I am maybe a bit worried about the welding as there was bevels I could see, so the welds would have had little penetration. I guess if it works, it works.
    236
  3. 11:02 see how the hydraulic break operator has a high sense of awareness and using hand gestures to command other assistants to get out of the way before the plate springs up. Complete harmony between workers and machines. High level of situational awareness and safety mindset 👏
    214
  4. This guy is great considering what he has to work with. He's very meticulous with alignment, good welding (he has very basic welding equipment). A good craftsman.
    213
  5. This welded cilinderhead will be fitted on a welded cilinderblock and will be a perfect boat anchor
    209
  6. I absolutely don't understand some people who use animals for work and don't give him a lot of food. My conscience wouldn't allow it. Shame on you who do it!
    186
  7. 50 years ago I worked at Sterling Metals (UK) making cylinder heads and blocks. Today the pattern equipment for a head would be in the region of £300-400k. This vid was amazing - pattern equipment from scratch to make some replacement heads. Not to mention the moulding and core-making skills. Well impressed. Although I did wonder how they were going to make the water jacket core to keep the head from overheating. Answer - don't have one.
    153
  8. The team of workers is very professional and well-trained. I think this is really a quality channel about repairing and restoring old items, and deserves to be known and followed by more people. Congratulations 👏🏻👏🏻👏🏻👏🏻
    152
  9. If you look at the valve seats you can tell this was a junk head that they just broke to make another fake video .
    104
  10. Pretty dam good. You can tell this guy has done many before, and I’ll bet he wouldn’t be in business if his success rate wasn’t good. A+ for effort.👍👍👏🏻👏🏻
    101
  11. i like how the guy with the sliced up knee is sitting one out taking a break while the guy who is about to slice his knee cuts the next sheet. lol. These guys are great!
    100
  12. Ох эти Пакистанские жестянщики и мастера с супер тапочки и национальной универсальный спецодежд.
    98
  13. The acting at the start deserves an Oscar!
    84
  14. i feel sorry for the horse poor thing not fed enough got cuts all over and you can see its ribs! if they fed it better it would perform better
    83
  15. Awesome work guys. You’re very good at building those turntables. Much respect from Australia 🇦🇺
    83
  16. " See hard working man putting lives in danger with this stupid trick". More like it... .
    77
  17. This is what you call teamwork your guys are amazing you work hard for your money man my respect goes to you
    76
  18. It is so nice to see everyone doing their part and working together. Great work guys.
    68
  19. Cutting Edge Australia, watch and cry🇦🇺😂✌️
    65
  20. These peaple never cease to amaze me .they could realy use a Milwaukee m18 1/2 inch or 3/4 high torque impact gun .
    62
  21. I love how they clamp the ground on the far end of the lathe and welding current runs through headstock bearings or whatever else is a good ground. I saw a guy once weld a rollcage in a stock car using the end of the crankshaft as a ground. Didn't turn out well about 10 minutes after he hit the track.
    61
  22. Safety first 😮 Most of all I feel sorry for the horse, fatten it and heal its wounds. أَوَلَمْ يَرَوْا أَنَّا خَلَقْنَا لَهُم مِّمَّا عَمِلَتْ أَيْدِينَا أَنْعَامًا فَهُمْ لَهَا مَالِكُونَ
    61
  23. Not a lot of welders know how to do a hot tack. At 17:05 he welds both sides then hits each side with the hammer while the welds are still hot. The weld is just hot enough to compress but cold enough to hold the metal tight against the metal you are working with. This takes practice but if you do it right it will give you a super tight fit much like a hot rivet would. The sheet metal in the beginning of the video likely came from a scrapped ship. Nice way to repurpose some good steel.
    57
  24. I pray for the horse.😢
    52
  25. It is admirable how they carry out such work with the simplest means .... Respect
    51
  26. Admiro mucho la labor de estás personas, tienen mucha habilidad, para ellos no hay nada imposible, tienen mucha condición física,mucha actividad y conocimiento, los felicito porque en otros lugares en vez de reparar, solo cambian por pieza nueva, los felicito, todo trabajo tiene solución,y para ustedes no hay imposible.
    51
  27. Love this channel. Never ceases to amaze me what people can do with rather simple tools but a lot of skill and knowledge.
    49
  28. These men are a credit a example to the working man in all country's with minimal equipment and tools working in the outdoor situation using their own common sense to stay safe Cheers from Nz
    46
  29. These guys risk their lives doing this type of work. A frayed cable or strap could mean disaster. I guess feeding the family is the most important thing. You do what you have to. Kudos guys.
    45
  30. I like the involute shaped bench grinder wheel at 16:35.
    42
  31. Мне одному показалась супер точная Проволочная технология и биение на 14:39 фрезерного станка
    41
  32. This video makes me want to start a go fund me for respirators for these guys.
    40
  33. Процесс заточки модульной фрезы на наждаке шедеврален! И нечасто у пакистанского токоря штангенциркуль увидишь, возможно в новинку инструмент.
    39
  34. I am so impressed at the caliber of work you do considering the tools and conditions you work with and in. Great job!!!...👍..
    38
  35. Let's remember just a couple of years ago some of these people thought it a good idea to extend a five story sewing factory up another couple of floors with concrete slabs. Naturally the building pancaked and crushed 1600 mostly women sewing garments.
    36
  36. Very very few people can truly understand what dude did here. I am very impressed given what he has available to him. 👏
    36
  37. meanwhile a CAT mechanic in US:sir that brake job is gonna cost you 11 000 dollars and will take about a month to complete.
    35
  38. That ring must be pretty thin after all that cutting. Also, no heat treatment for the teeth means it's not going to last very long.
    34
  39. Aaaah yes.....the "close enough" measuring system, I'm kind of surprised they didn't use a piece of string to measure the bore....
    33
  40. I'm an American, and was in Thailand 21 yrs. and built several houses with local hill tribe helpers. Most of the framing is with steel members. I didn't like welding, so I always had helpers do that part. Once they came running to me with their welding masks and told me to look at the sun. It was a partial eclipse. Another time, they all jumped down from their workplaces and ran down the dirt road. I soon realized they were chasing a large snake. Dinner.
    33
  41. Варит через подшипники шпинделя. Просто молодец! 👍
    33
  42. Cool to see this heavy cutting done without a plasma or water jet cutter or computerized cutting. Their heavy pantograph for torching small parts out of heavy sheet was fairly modern, though some of the torching was done freehand. Great work by great workers, I just wish we could all get along and respect our differing cultures and religions and quit blowing people up everywhere, from the ground and from the air, all sides would benefit from a forever-cease-fire.
    32
  43. نعم هناء بالكستان ارض اصناعة والمعجزات باايدي رجال هم من يصنع المستحيل❤❤❤❤❤❤❤
    32
  44. Amazing to watch, that forge work was unbelievable, how they coordinated and moved those huge pieces of steel till they got the correct shape. Brilliant workers 👍
    31
  45. United States 😂😂
    30
  46. On today's episode of how not to machine gears.
    28
  47. Expensive to trim with oxy-acet. They paint over a lot of rust - that's a bit slack. Bumper bar shown at the end already has a small dent in it.
    27
  48. Dear God how do these get on the market and I love the tight half inch tolerances and the acceptable 10mm back play in the tool post
    27
  49. The best is the guy doing the letters, he didn’t make any single mistake, great skill! 🎨
    27
  50. Переживал за ребят больше чем за свою личную жизнь! Съёмник Hitachi даже не помог!
    27
  51. Способ крепления матриц и пуансонов просто шедевральный.
    26
  52. Safety sandals everyone...Safety sandals!
    25
  53. Всё время скептически относился к подобным видео, но тут парни действительно молодцы! В кустарных условиях, на коленке, полностью повторить столь сложную деталь! Даже заводские клейма-литьё вышли как на оригинале!
    24
  54. Give poor horse some food.
    24
  55. Rare footage of Mr. Spaceley's great great grandfather creating the companies first sprockets. Courtesy of Spacely Sprockets memorial footage..
    24
  56. welded on tool post is a first for me! welded in expander piece is a second first for me! using precision vernier as a chip clearer is a third first for me!
    24
  57. Excellent, he has every reason to be proud of his factory and skill.
    24
  58. Молодцы Пакистанские без отказные мастера.
    23
  59. Были мысли что сейчас начнут ремонтировать.
    23
  60. ROFLMFAO....soooo do I have to pay extra for ALL the wrinkles/dents/creases in the new door skin? Or are they free of charge?
    23
  61. What amazes me is they all seem to have all their toes.
    23
  62. These videos have more advantages than disadvantages. Why, we now see things as they are
    23
  63. These people are afraid of no job! Well done! 💪 Greatings from Ukraine!
    22
  64. If everything continues as it is in the world, very soon this will be an everyday thing in developed countries.
    22
  65. Just to let you guys know, these dont go on cars normally. they typically go on trailers drawn by hand tractors which top out at about 30km/h. Just think, for that socio group, can they justify spending one months wage (around $60) to replace one tire on their hand tractors trailer?
    22
  66. Brilliant, Skilled heavy manual labour. Who'd have thought you could have all three in one job. I love it. Be nice to have overhead cranes or magnet hoists but hey, these guys get it done.
    22
  67. In mass production, even where the ‘line’ is human you must be aware that every step in the production is 1) adding value and 2) definite allocation (your material can no longer be used for something else). You will need to do everything to avoid rework. That is simply waisting time and value. When a stage in the proces is finished treat the product with respect, your fellow workers invested effort in the product, don throw it around, handle with care! We see workers on the buffing wheel. Buffing might be needed, the scratches made by throwing products on the floor can be avoided. For the rest of it. The factory looks clean and looks organised. Good job.
    21
  68. Love that they ended the video right at the spot where they did a shit job welding those plates in on the ring. All he had to do was back gouge the outside seem and it would have been a decent repair. But to leave it like they did and just weld over the top of a tight seem was just plain lazy and you can see the result. Be lucky if it doesn’t peal off that inner wheel like a tuna can lid. 🤦‍♂️
    21
  69. May god bless the great skill of these workers.☘️👍
    20
  70. Глаз-алмаз? Индикатор часового типа,для проверки биения? -нее,не знаю,это фантастика...
    20
  71. FFS Grease those bearings that you layed in the dirt.....same job next week.
    20
  72. Я боюсь представить что они могут сделать если им дать нормальные инструменты и станки!!!!
    19
  73. Бедный лошадь 🐎
    19
  74. I'm impressed they're able to make reasonably good quality castings in a hole in the ground using scrap metal. 👍
    18
  75. I wonder what they sharpen those tool with, and what kind of accuracy they are able to maintain. In that environment I imagine any machine "ways" or tracks are worn to hell with the amount of dirt and dust in the air.
    18
  76. I have my Heartiest Best Wishes for these Hard and Intelligent Workers who are working in very Ordinary Conditions, I request to owner of this Business to Please put attention on their Safety as well , Like Proper Uniform, Helmets, Safety Gloves , Shoes and Spectacles etc. Thanks a Lot on Producing this Video.
    18
  77. Штангелем стружку убирать и потом по заготовке стучать))) В токарке не дай Бог штангель на металл положишь, от дедов тут же подзатыльник прилетал, только на ветошь)
    18
  78. Good to see they're all wearing their safety sandals and dressing gowns
    17
  79. Im so happy that there are still people that can make things with minimal tools. If world goes to shit they will last.
    17
  80. Adding more weight to an engine that will be overloaded anyway….
    17
  81. What the heck did they weld that small tool post on the side of the main tool post for? It achieves nothing that some spacers would do, and adds extra probability of chattering, which is what is happening. At 9:06, Allen key left in tool mount screw while running - dangerous.
    17
  82. These people solving technical problems without technical knowledge, safety of customer leave it to God
    17
  83. Чёткость ,, на глазок" , на грани фантастики .
    17
  84. I guess I missed the part where the steel bar is hardened.........
    16
  85. Глазаааааа ,!!!!!!
    16
  86. I’ve seen it broken in tw, there’s no way to access the areas that need welding together. This may fool some but not all. You’d never trust it anyway even if they could somehow get inside to weld all the places that they missed.
    16
  87. Уважаю, я так не смогу. Но вы зря седла клапанов не ставите.
    16
  88. высокая культура производства. особенно покраска
    16
  89. Good job guys, from America.. 👍🏻
    16
  90. Thank you! I really like the long format video with so much detail!
    15
  91. Done my apprenticeship at lairds as a boilermaker welder and watched this in amazement, purely for the lack of protective gear. No boots, gauntlets or goggles for a job that could maim or kill you in a second. These lads were exceptional in their execution of the task, and the seasoned lads really kept an eye out for the labourers under their care. Hats off to them.
    15
  92. Super interesting educational step-by-step process, and without any music which would annoy me.
    15
  93. Interesting tool for agriculture 0:11 I think your worker has a spare eye if he's so bold as to use a welding machine without protection and what is even funniest is starting at 9:47 when the quality control came to check the hyometry with a hammer and a couple of sledgehammer blows to check the welding seams may not amuse us as a spectator
    15
  94. My grandfather, a 96-year-old man, worked all his life with irons, he has all the welding titles Friction welding. Roller welding, Electromagnet pulse welding, Co-extrusion welding, Cold welding. Diffusion welding. Exothermic welding. High frequency welding. When I showed him this video, he told me if you don't take those papers that are on the wall, I'm going to throw them in the trash and I took them as a souvenir. The old man was speechless when he saw this.
    15
  95. Impresionante!!! I want to go to Pakistan to meet all those skillfull men!
    15
  96. This is not hardworking.. This is cheated... Liar bussiness...
    14
  97. Great work guys. Somebody spent a lot of money on machinery and tooling. Another video where the boss tries to get his face in and has no idea. He jumped six feet when the spot welder threw out a spark. He had no idea but his ego had to make an appearance rather than just showing the real workers.
    14
  98. If you pull it by the end when it's bent you just jam it at the cylinder end you should have put the winch nearer to the cylinder so it was pulling at the straightest angle
    14
  99. Глаза боятся-руки делают!👍🏻
    14
  100. Anyone criticizing the work conditions and else, or quality of the product should already know that these people working here dont earn in an year as much people in the west earn in a month for the same skills. Still, these people do it, because of poverty and a will to make living for themselves. Also the product itself is not substandard as its used widely in respective market hence the production is still going on.
    14
  101. Great job! Thanks for the video. For all the negative commenters on safety, shop conditions, and the lack of new tools and equipment... anyone can manufacture with new modern machinery in a spotless shop. If they have new equipment they likely began on old equipment. Considerate to everything these fellows are incredibly talented. Keep up the great work! Best wishes for continued successes!
    14
  102. I would like to see one of these machines fully installed and working. I feel your videos always finish half way. I would like to see the whole process. Great skills! 💪🏼
    14
  103. What a great bus, i love your ingenuity 👍
    14
  104. Super robota jest profesjonalny zakład
    13
  105. Scary when smoking a cigarette is the least dangerous thing going on in the room
    13
  106. Featuring: the only 2 legal models of hammer in all of south east asia. The regular one, for everything, and the larger model, when the regular one is not enough
    13
  107. I’m a subscriber to this amazing channel because it shows great ingenuity. Unfortunately, here it appears that people are risking the insidious hazard of lead poisoning.
    13
  108. даааа! с такими люфтами точность проточки орет в голосину где то в сторонке)
    13
  109. estos hombres reúnen la capacidad para fabricar hasta una camioneta un camión y cualquier máquina o equipo industrial o rodante son muy inteligentes y verdaderos hombres de trabajo felicitamos a estos obreros ❤🎉
    13
  110. How long did it actually take to make the bucket? Great looking product, looks very professionally done.
    13
  111. Amazing..a plate steel bumper... And spraying with no mask protection....short life ahead.
    13
  112. 4:38 they don't know about calculating expansion of the ring and shrinking it onto the yellow centre. But if it works then that's all that matters.
    13
  113. Sorry guys but I think it may have taken longer to make this repair, than the repair will last on the machine. Contact Mickey and Donald for some tips on fitting metal rings together. Good luck.
    13
  114. Their precision is killing me.
    13
  115. That poor horse, the open wounds and frail body. Why don't they just use the workers to pull these creations around. I hope that poor soul gets taken care of.
    13
  116. This will never be as good as it was before
    13
  117. There's nothing great about these videos. The working conditions are like a hundred years ago, but the product quality is worse. Back then, new steel was used, not scrap taken from ships, and everything was not roll in brown sand.
    12
  118. I love this vids but we NEEEEEEEEED to see the rest of the engine put back together and start and rev
    12
  119. Gute Arbeit und der Besitzer kann darauf stolz sein 👍 Good job and the owner can be proud of it 👍
    12
  120. Well, that’s one way. Always amazing how much handwork is done there. Bumpers seem a bit light?? But that insures future sales.
    12
  121. Wichtig ist, dass man alles mehrfach auf den Boden wirft. Sonst wird die Qualität zu hoch.
    12
  122. Would be nasty breathing that dust all day.
    12
  123. На 6.45 пальцем померял - и поприхватывал.
    12
  124. That’s some pretty cool stuff going on there.
    12
  125. I don't think that's the same cylinder head at the end of the video... you can't see the "repair" on it.
    12
  126. Spend half the video getting that Lully off and then reassemble without grease, brilliant!
    12
  127. imagine what he could do if he wasn't using worn out machines and dull tooling
    12
  128. Зимние шины!))))
    12
  129. They wasted a good pile of shit
    12
  130. It won't work, it will leak everywhere. That's why they didn't show the rest once fixed. It is a high pressure hydraulic cylinder.
    12
  131. These always amaze me in some way or another.
    12
  132. I am Indian.. but pakisthaniye people vary hard working ...very good
    11
  133. 0:54 мин- шлифовально- рифельный станок.Работал когда то на таком.Валки для помола муки на нем обрабатываются.
    11
  134. 🤣🤣🤣🤣 на один раз завести двс
    11
  135. I couldn’t imagine torching in flip flops, wait, yeah I can.
    11
  136. Diese Leute sind sehr gut und sehr fleißig. Die Arbeit an sich ist hochqualitativ. Was mich nur sehr traurig macht ist das diesen Menschen keine Schutzausrüstung wie Sicherheitsschuhe, Schutzbrillen, vernünftige Handschuhe usw gestellt wird. Und hinzu kommt noch die sehr schlechte Bezahlung.
    11
  137. The comments from some people here are hilarious... you watch a master like this man on the internet you say crap about the fact it wouldn't meet your OEM requirement like this has to do with anything going on here... but if this guy was walking into your shop it's your pant you'd crap in! I took jewelry class and the best and most respected teacher went to Japan to get his apprenticeship done and learn how to get different metals with different melting points to interact together (it's the closest thing to actual alchemy you can do... seriously). This man has the palm of his hands like literal burnt leather and can remove a small silver ingot from the mold with his bare hands. He said to not do this tho because he lost a lot of feeling. But man he demonstrated it and there was a silence there... when you dedicate your life like this to a craft it's a whole other level. Here we may have all the safety equipment and easy machines but, partly as a result, we don't get the skills to back any of that gear up most of the time. And lack of skills is more dangerous than safety measures for people who haven't mastered something like this. Just saying.
    11
  138. Нельзя руками трогать вращающуюся деталь на станке, у нас в России человека замотало
    11
  139. Отличные станки.
    11
  140. Simply amazing! This is called "Engineering". Really no workds can appreciate the talent, devotion, and ingenius efforts, and experience put together to deliver function. I love this video.
    11
  141. I m indian but pakistani working verry exellent like pakistani🌹🌹🌹❤❤❤❤💯
    11
  142. Покраска ваще огонь 😳
    11
  143. What's Urdu for "that'll buff out"?
    11
  144. Someone get this man a 3D printer.
    11
  145. The time it took to build that door is longer than a real factory build a complete car and a better car.
    11
  146. As a professional welder I want to send these guys some decent boots and leather cape and a legit welding helmet. Stick welding wearing man jammies and sandals😢 for those that want a debate about what a man is they should watch this video these dudes definitely know what they're doing and have built more than a few of these silos
    10
  147. Parabéns, vocês são muito bons, fazem muito com pouco !
    10
  148. I should think the majority of the workers are either deaf or suffering from some sort of lung damage such a ‘Silicosis'. The noise from the furnace will cause serious hearing damage and from heavy machinery. Not to mention the damage done to the immediate environment and further afield in the water supply.
    10
  149. ماشاء الله تبارك الرحمن🌹❤الله يحفظكم ويبارك بيكم🌹👍
    10
  150. Пожалуй так же девяточку покрашу. 💪
    10
  151. Very interesting to watch, BUT I wish we could see more, such as where is this roller going to be used etc.
    10
  152. What a superb demonstration of what can be accomplished with a couple of metal L-squares, a couple of oxy torches and a lot of sweat from a group of men wearing flip-flops and without anything besides occasional makeshift eye protection. The finished product is impressive and a special kudos to the man painting the signage on the machine freehand. A-1 job!
    10
  153. Приварили бы уже мост к раме напрямую, без тонны рессор, и всех то делов! А на сэкономленный вес добавить борта вверх и загрузить еще тонн 5🤣🤣🤣
    10
  154. Типовой сарай-полы деревянные а крыша из профлиста))
    10
  155. Insanely good! I've never seen anything like this before.
    10
  156. Excellent, he has every reason to be proud of his factory and skill.
    10
  157. Head was swapped around the 25 minute mark. The head at the end of the video was different with no grinding on the port side. Nice try slick!
    10
  158. I'm not a engineer but I would not trust a gear that has been welded Im sure the steel is not the same after welding it's very dangerous
    10
  159. Lol, the way you guys squat hurts my knees lol but y'all are amazing to watch. Hello from Texas🇺🇸👍
    10
  160. 3:20 зачем стружку убирать голыми руками? Сделать из куска проволоки крючок и им убирать стружку - нужно только желание
    10
  161. у них наверно эти коленвалы раз в месяц лечат таким макаром... это жесть
    10
  162. Imagine doing this on a street in London, Paris or New York etc.
    10
  163. Wonderfull, these guys know their stuff. Also amazing is that the presses are also locally made. Vintage car enthusiasts looking for those hard to find panels should talk to these guys, they can make anything. So, Hino Japan would supply crated engines, gearboxes and differential axles and the rest would be built in Pakistan. Zindabad!
    9
  164. Сколько времени это может отработать , я не знал о такой технологи восстановления коленчатых валов
    9
  165. Quem olha não sabe que foi esse a escola fundamental da metalúrgia sem máquinas modernas só Quem sabe esses conhecimentos é mestre nesta área ❤😮
    9
  166. It's not Hino it's UD Nissan bumper
    9
  167. Don't let sworf build up like that if it catches your hand it will rip your fingers off
    9
  168. 10:20 Hermosa elección 😘 XxLike.Uno de los mejores conciertos ❤ de los mejores conciertos 😘 05:01 Senada: "Hermoso" 04:01 Megan: "Hotter" 03:25 Hopi: "Sweeter" 01:12 Yoongi: "Butter" 01:47 Amor: "Momentos" 00:19 Joonie: "Cooler" ... Tu..belleza.viaja.al.universo.se.reune.con.fJkP estrellas. tus.admiradores......feliz Navidad.y.noche.buena....mis.respeto.para.todas.las.mujes.del.mundo...saludos..al.fin.del.mundo Son unos de los mejores conciertos, no puede ir pero de tan solo verlos desde pantalla, se que estuvo sorprendente ⬇ y.luceros...tu.mirada.enamora.al.sol.....tu.hermosura.quedara.por..una.eternidad.en.los.corazonede.
    9
  169. Amazing how so much time is spent in parts handling. Throwing stuff on the floor, then scrabbling around for the next process.
    9
  170. I like the purpose-built dual hydraulic press. Great re-use of former excavator cylinder. Also admire the lathe fixture used to mount the castings for line boring. I wonder how many finished units this shop produces in a month? Great video.
    9
  171. Wear indicators? What wear indicators?
    9
  172. Отличное производство! Баки огонь! Парни молодцы.
    9
  173. It's nice work, but it looks a little flimsy for something that will be worked hard in a field.
    9
  174. Great work 👍
    9
  175. Коленвал, как я понял собран из двух разных кусков. А как же балансировка по итогу?))
    9
  176. The guy with the cutting torch, if he would fix the leak on the tip, he could have cut the frame in half the time. But you got to love the recycling these guys can do.
    9
  177. That’s pretty amazing. You don’t see people in the west fuse welding with an oxy anymore, that takes a huge amount of skill. There always seems to be someone just hanging around in these workshops but then there’s always someone willing to jump in and help when needed. Cheers Stuart 🇦🇺
    9
  178. Pretty damn impressive, they built that thing in under 2 hours! 😳
    9
  179. Great content bro you are discovering talented people who are doing great with less resources
    9
  180. That bumper is more a front decoration than any thing else ..It won't stop any bumps
    9
  181. So that's where the dent in my tank came from. The guy that made it, threw it on the ground, 5 seconds later.
    9
  182. I watch these videos and see the exact same principles being applied as in videos from the US. The only difference is that these guys are more visibly working class, do more labor intensive handcrafted work and just get on with the job, while in the US videos parts are more modular, their surrounding look much less desperate and there are a few more fancy toys. As for quality control, I suspect that there is enough of that: if parts fail do you think that truck drivers will happily accept the risk to life and limb and downtime that cost them money? Do you think a Pakistani fabricator is incapable of figuring out that, "We got a couple of fails this quarter. We need to put some extra reinforcement .... right here". An American machinist I was watching on video commented that he was using a "Pakistani style" runout gauge, then immediately caught himself and said that actually that's what his father used and he still uses it for quick determinations, while using the dial for finer reckonings. Same in Pakistan. Me, I'm equally fascinated with how they do it in Pakistan. It's as if the specs are all in their heads and the materials an extension of their bodies. But yes, there are generally more industrial accidents in Pakistan and India. Respect tho'.
    9
  183. Молодцы. Хорошая работа.
    9
  184. What is the lung cancer rate of breathing that dust?
    8
  185. замечательная работа. теперь надо покрасить и выкинуть! на авто нормсльные валы часто ломает, а уж на вареном точно далеко не уедешь. вдобавок шейка сырая после сварки и биение, хоть и минимальное, но осталось, а значит вкладыши будет жрать. хоть бы уж перешлифовали под ремонтный размер.
    8
  186. Good job……very good craftsmanship.
    8
  187. 7:00 to 8:36 is a cluster F.
    8
  188. مشاء الله و الله يحفظكم ويحفظ هذه الايدي العبقرية لقد اعجبني هذ الاتقان والتفاني في العمل بألات بسيطة ومصنوعة عندكم تمنيت لو تعلمت عندكم هذه الخبرة وجئت الى بلدي الجزائر نحن نستورد كل شيء لا نصنع اي شيء من خلال فديوهات عديدة رئيتها لاحظت انكم تصنعون كل شيء ولا تتكلون على الاستراد بارك الله فيكم على هذا العمل الجيد
    8
  189. As always, an incredible job.
    8
  190. 22:59 But what a beautiful beard of this gentleman responsible for the locking mechanism. It also appears after 25:25
    8
  191. I am in shock I can’t believe it what a Brilliant and humble people good job keep it up ❤❤❤❤❤
    8
  192. Welding steel to cast iron is a very tricky task. This is going on a crane??!! Most crane or heavy equipment accidents happen out east!!
    8
  193. 100% canserojen dust
    8
  194. Just done for views not function. Noticed that no one ever shows these installed and running
    8
  195. You got to hand it to those guys, they don’t waste anything! Most all of the material looks like it was salvaged. Over here in the USA everything would have been new material and the cost would quadruple. I have always been know as a scrounger/Hoarder and have made some really useful and even elegant devices/machines using mostly salvaged materials. Using that kind of material requires lots of “Fluidity “ in the design. Hahahahaha! Good job guys!!!!
    8
  196. Why weren’t the taper roller bearings packed with grease during assembly 🤔good video 🇬🇧
    8
  197. I'm waiting for the video called: "How expert mechanist cleans his shop with a brush".
    8
  198. I have watched so many of these style videos and I love them. Bless this man for actually using a dial indicator to get everyting straight and true!
    8
  199. Tire shown at end is not tire shown being repaired.
    8
  200. Класический метод кустарного производства!
    8
  201. Первый раз увидел женщину! Она вышла из дома, справа , 4.10 👏👏👏👏
    8
  202. I'm not sure what amazes me the most. The fact this popped in my recommendations for no appearent reason or the fact I watched it till the end. Fascinating.
    7
  203. How Engine Cylinder Heads are Made In 30s ...
    7
  204. Oh my god they actually have a welding hood.
    7
  205. 3:12 That guy fixing the dents because his colleges were throwing the tanks before. lol
    7
  206.  @DiscoveringSkills  yeah, but it is the worst way to do this, they are actually making it weaker by poorly welding these in. No reason to fill the holes.
    7
  207. At least they have a torque wrench, LOL
    7
  208. Great video! Finally we can see a machine at work. They must be really proud
    7
  209. Seems like this culture don’t value personal safety and eye protection. 😱Very difficult to watch till the end. Great workers though.
    7
  210. The irony is that these people are proud of the crap they produce.
    7
  211. This is the cleanest shop in the series so far relatively speaking..
    7
  212. I am absolutely amazed. I am a graduate Mechanical and Computer aided engineering from a British University, so I'm familiar with the latest lathes and CNC machines. These guys are throwing modern engineering out of the window, with their primitive machinery. Wow!
    7
  213. i see the company is not wasting money on safety glasses
    7
  214. Good job. If you'll be carfull and don't load them with heavy stuff, this buckets can last more then one or two days.
    7
  215. Так что за название модели автобуса получилось?
    7
  216. I had never seen that welding a brocken Engine was ever succesfully done and possible. The different Materials hat two different behavior if they get warm. The welding will crack again.
    7
  217. Колено для ваз 2107 плюс нива тоже подойдёт.😁🤝
    7
  218. I bet you could never find people in the US that could ever do this work even with more modern machines. They are true craftsmen.👍
    7
  219. Where are your computers? Where are your clean floors, where are your snap on tools, lunch breaks and clean hands, where is the air conditioner, over head crane to lift the heads, where is star bucks, tolerance print out and flow test results? Where is your Adequate parts cleaner and compressed air, where is you hot receptionist answering the phone (oops I mean personal assistant), where are the automated robots bringing parts to you….. ohhhh just realized I’m bougie….. hell I don’t even drink star bucks, lololol…. I watch all these videos……
    7
  220. Я правильно понял, что коленвал был выточен в соседнем цеху? Может, даже на этом канале видео есть?
    7
  221. Все верно, они точат две половинки, так легче, а потом сваривают- так крепче)))
    7
  222. 0:33 это мастер их похоже,во всех операциях принимает участие! А вообще,красавчики,уважуха!!! 👍👍👍😊
    7
  223. У него часовой микрометрт) Или милиметрометр! Ну не суть) Тут все взаправду! Без шуток, коленвалы точат на станках где подшипники под бабкой с пробегом не более 50лет) а тут +- пол мизинца))) Неужели нельзя было посадку нагреть!!!!! Зачем и без того кривой коленвал, молотком херачить((((
    7
  224. Hello D Skills. Greetings and OMG that is scary, trying to jack the heavy truck on the busy road. So glad you moved the cargo to a fresh truck. Please give the skilled man with the cutting torch some grade 6 tint safety glasses. For comparison, normal light welding jobs use grade 10 or higher lens tint. His eyes have to last another 60 + years I hope. Will have to see part 2, nice frame work. All the best from Canada, Leon.
    7
  225. this reminds me when I did my first 966 brake job oh boy that was fun
    7
  226. Rudimentary is word that comes to mind when watching these men work with the equipment they have.
    7
  227. It’s amazing to watch how other countries make and repair equipment! Do the machinist learn at school or do they learn through apprenticeship?
    7
  228. Un caballo flaco, tirando tremendo fierro, eso es abuzo. 🐎
    7
  229. Закалка зубьев не нужна?
    7
  230. Скоро в России будет так 🙂
    7
  231. Thumbs up my man. God bless you for your hard work.
    7
  232. Да ребята не парятся. Колено зажимает, проблема решаема! Просто отпустить болт на крайнем бугеле.
    7
  233. 👋very nice, team work 💪, blessings
    7
  234. Без полиэтиленовых пакетов качество было бы не то...
    7
  235. покажите генератор ацетилена. эти люди досихпор используют карбид кальция?
    7
  236. This is the aftermath of all the repairs done in previous episodes. Isn't it ironic.
    7
  237. Hermosa elección ❤ Xxlike.uno de los mejores conciertos 😘 01:02 Senada: "Hermoso" 02:01 Megan: "Hotter" 03:25 Hopi: "Sweeter" 02:56 Yoongi: "Butter" 01:47 Amor: "Momentos" 00:11 Joonie: "Cooler" ... Tu..belleza.viaja.al.universo.se.reune.con.estrellas. y.luceros...tu.mirada.enamora.al.sol.....tu.hermosura.quedara.por..una.eternidad.en.los.corazonede. tus.admiradores......feliz Navidad.y.noche.buena....mis.respeto.para.todas.las.mujes.del.mundo..yvBQ.saludos..al.fin.del.mundo Son unos de los mejores conciertos, no puede ir pero de tan solo verlos desde pantalla, se que estuvo sorprendente ⬇
    7
  238. Je ne comprends toujours pas comment ces gens font pour arriver à de tels résultats avec si peu de moyens, mais c'est très bien. J'en déduis que toutes ces technologies complexes qu'on tente de nous imposer maintenant ne servent qu'à nous rendre plus cons. ----------------------------------- Google translate says :"I still don't understand how these people manage to achieve such results with so few means, but that's fine. I deduce that all these complex technologies which one tries to impose on us now only serve to make us more idiots."
    7
  239. Respekt for these people and their job 👍💪👌 Greetings from Germany 👋
    7
  240. Toutes mes félicitations ,très beau travail (France )👍👍👍👍
    7
  241. вот что реально интересно - такой ремонт реально работает или просто чтоб нае..ть покупателя?
    6
  242. Very nice work brothers 👍 Our country manufactures Nothing today 🇦🇺 Thanks for your hard work and pride 👍
    6
  243. Good job! This hydraulic cylinder is doing the trick guaranteed for next 5 minutes if pressure not exceeds about 0.05 psi. So don't blow in for testing!
    6
  244. Excelente trabalho 🇧🇷🇧🇷🇧🇷👍👍👍🔧
    6
  245. Almost everything I was taught about the process of welding is lost here :) Great industry here folks, who could not be impressed with this?
    6
  246. Оцинкованные красише бы смотрелись, чем крашенные отработкой
    6
  247. That's not a worm gear, it's a straight cut pinion.
    6
  248. Продать машину хватит))
    6
  249. Hard work! Tooling is fairly basic, no ejector pins, clamping. Trimming with oxy torch. Supplying parts for Japanese truck?
    6
  250. very cool) we don't do that) 🔥🔥
    6
  251. Great Efforts Welldone✨
    6
  252. Well, comparing to other videos out there, these guys are using good quality steel for their forgings, not some sand cast products made of (s)crap that will brake imidiatelly when first used...
    6
  253. There are nightmares in OSHA workplace safety - and then there is this. Unless specific positioning was required to cut that down, the bricks (bad choice) to keep it stable were useless. The loose clothing that is not fire resistant alone with the sandals is horrible. Absolutely no concern for the workers safety. No eye or head protection is even more negligent. I do thank you - you provide me material to my student on excellent examples of how to do EVERYTHING wrong.
    6
  254. Привет Вам труженики. Россия с Вами. 👍🤝✊🤗💯
    6
  255. россия в сраке...Пакистан алга!
    6
  256. It is hardly nice work TBH, this no look tacking with stick welding is just stupid as you can't see. I weld a lot repairing farm kit and if you can't see you can't weld.
    6
  257. Молодцы,терпение и труд все перетрут. О чего интересно этот механизм? Титанический труд.
    6
  258. Truly old school craftmanship learned over generations. Who needs million-dollar equipment, just common sense? If they had better equipment, they would be unbeatable.
    6
  259. prob one of most cleanest work places iv seen so far and thought there was going to be more on the door but good job though :)
    6
  260. Where do they get their parts from..I don’t know about the tire balancing act…..
    6
  261. The engineer that developed that is a genius
    6
  262. Wow, that was impressive - really something to be proud of, big thumbs up!
    6
  263. Sweet!!! So talented.I love how they were able to add all that new material and then turn it down to provide lock and key. Then secure the piece and not only create a bevel to weld but then weld and turn down again so that it is a usable crank again. We have so many high tech machines that probably could not do this and yet these guys do it with only the most rudimentary tools and machines. Just amazing . I do not say that lightly.
    6
  264. I can tell by the color of those chips this man is a master of his craft 🙂
    6
  265. Не люди.
    6
  266. Hey, these guys are working in totally awful conditions. Health and safety are not even slightly addressed. They are put in a position of having to accept this. Their tools and equipment used for manufacturing are the absolute minimum. With all this, they are producing functioning mufflers.
    6
  267. Welding is shocking,it wasnt deep enough to support tons of weight.He should have bevel it before welding.
    6
  268. Awesome… very beautiful 👌 Fully watched 👍👍👍👍👍👍
    6
  269. Masahallah zabrdisat will don very nice good job made in Pakistan 🇵🇰🇵🇰 zandaibad ❤ love from Iraq 💕🇮🇶🇮🇶🇵🇰🇵🇰💕🏏💐👍🌹💐 ya Allah ya Ali madad 🌹💐👍
    6
  270. very nice hardworking like me,watching here in the philllipines
    6
  271. Моё уважение этим Индийским или Пакистанским работягам!
    6
  272. Выглядит крепче нового Молодцы Они его заварили, теперь я видел всё...
    6
  273. Wow not bad for a manual lathe with a home made HSS bit. 😲 Many machinists in the states would be lost without their carbide and CNC machines.🤔
    6
  274. unique footage,pro editing, world class video, thank you for making these super interesting videos!
    5
  275. Did I miss a step? Where does the "extra length" come from to form the spigot from?
    5
  276. En esos paises desconocen por completo la seguridad de los obreros.
    5
  277. Вот оно кто мне глушитель делал
    5
  278. Yep those welds will sure hold. And one leaky head 🤣🤣🤣🤣
    5
  279. Что это такое это ранец 🎒 для полёта 🤣🤣🤣👍👍👍👍
    5
  280. They have pretty ingenious methods especially as they are working with basically scrap metal. Even if the original design is probably borrowed from somewhere, the end result is pretty good. They seem to have about two semi-broken welding masks in the manufacture though, I know it's a poor country, but an automatic mask cost about $25 with free shipping from china... A simple mask $5.. They can't be that poor..
    5
  281. excelente trabajo muy artesanal
    5
  282. If these guys were in America they would put all of the so called custom car builders to shame. Kids learn from man and cycle goes on. Bravo masters
    5
  283. Wonderful! For some reason, I now have a thirst for some juice! :)
    5
  284. Good work, but your clothes may be create very dangerous and fatal conditions for you, please wear tight clothes upper zone of your body
    5
  285. 45:24 Closing form with cores for intakes and outlets -nothing else. 49:24 Casting with much more detail, and a water jacket! The work these guys do are real magic I guess...? 👎
    5
  286. Какие галтели на шейке, а такие вроде))) Биение 2 сотки это отлично))) ХЗ но ресурс этот мотор иметь не будет....
    5
  287. Shoutout to the donkey !
    5
  288. These guys have the ingenuity to partially compensate for all the wrong ways to go about doing the job. They could firstly do with better machines and first class training from the likes of youtuber CEE Australia. These guys have skill, they just need a bit of retraining.
    5
  289. Интересно, есть ли у них цеха закалки, например, шестерен, ну и др. изделий.
    5
  290. огонь машина )))
    5
  291. Well, that was easy !
    5
  292. Again! True, quality work! Hard working people! They do the right things for other people, not weapons like damn Russia! I wish you success!
    5
  293. It's amazing. Never seen this done before. Looks like a brand new crank. Job well done
    5
  294. Imagine what these guys can do with nice equipment.
    5
  295. Going through the same thing I do with my old truck, only on a much larger scale.
    5
  296. every mechanical person should watch these films, they show with ingenuity, anything can be made.👍
    5
  297. amazing what you guys are doing with so little tools and safety gear .
    5
  298. Que trabajadores para saber. Saludos desde BOGOTÁ 🇨🇴👏👏👏👏👏👏👏👏🇨🇴
    5
  299. no need to grease. The rocks that fall in past the shaft will lube it nicely.
    5
  300. I hope the cylinder head that I bought off of eBay went through the same process as this one, you guys did a great job👍🏻🇺🇸
    5
  301. How primative. They spray paint with out any lung protection. Not even a simple mask. Rmember that when you buy a Hino vehicle. sham on Hino for allowing a sub contractor to do that.
    5
  302. This is only what we see. I bet a few toes went missing too. And OHSA is not in their life at all. But they are careful enough to do their daily grind. Still my respect to them all. =)
    5
  303. Are chip n dale also working there ? I hear their voices in background 🤔
    5
  304. That was art.. Well done guys 👍👍
    5
  305. Лошадь ушатали дикари
    5
  306. Harbor Freight?
    5
  307. Great, but throwing the tank skins across the floor and into other piles of tank skins makes me want to avoid this brand. Lots of nice equipment to do that to the absolute worst piece to throw.
    5
  308. Судя по стружке кольца из чугуна новые сделали, или нет, а старые тоже чугунные были ?
    5
  309. Не в коем случай не покупать
    5
  310. This must be an expensive job, they're using charcoal instead of cattle poo. 💩💩💩
    5
  311. Magnifique travail ! Dommage que la video soit interrompue sans arrêt par des publicités de plus en plus longues, très agaçantes, ça devient complètement odieux !😡😡
    5
  312. I am fascinated by the ingenuity and work ethic of the people in these videos, but holy cow, you have to wonder what the future brings for these men. Welding without full face shields, or worse, holding the workups while the welder tacks and wells and doing this without any eye protection. Or about the guy running the lathe with. a pair of gloves on. I was expecting the worst. And how many of these guys will have a career-ending injury when one of the things they carry around drops on a foot or a hand. Then there is the guy spraying paint with just a simple cloth over his mouth and other guys walking by right in the overspray stream. Lastly, I wonder how long this entire rig will actually last. There is not.a single precision cut (other than the lathe) in the entire video. The welding gaps are wide and imprecise. The whole rig looks like it could be caddy-wonky from the start. Not a single bolt had a thread lock or a locking washer on it. I suspect this rig needs constant tightening and adjustment in the field. I would love to see a video of this rig in use after a few months.
    5
  313. It appears most of yall have never heard of regroovable tires
    5
  314. Wow, that was impressive - really something to be proud of, big thumbs up! Congratulation:face-red-heart-shape::face-red-heart-shape::face-red-heart-shape::face-red-heart-shape::face-red-heart-shape:
    5
  315. Just becouse you double the spring count in the back does not make it safe to carry a heavier load . The axle will only handle so much weight . Did it a dawn on them to haul less wieght and make a few more trips ????? It's easier on equipment !!!!!!! They have that truck loaded on a single axle and it should be have a tandem axle for that load !!!!!!
    5
  316. It's useless if it not hardend
    5
  317. Halfway through the video, I counted 3,567 OSHA violations
    5
  318. Its unreal what these guys can do, i hope not many get hurt doing without most safety gear
    5
  319. That lathe machine looks dangerous!
    5
  320. These forgers are heros, but the real hero is behind the camera who brought us the video
    5
  321. Where were the experts? I can tell you another thing I noticed, not a single thing done for the safety of those men. I am glad all my jobs had great safety laws and practices to help prevent the unnecessary injury or loss of a valuble human life.
    5
  322. I have great respect for these guys.
    5
  323. May the electricity stay on so he can continue his valuable work
    5
  324. Amazing. What was the timescale from start to finish?
    5
  325. 7:42 respectable dog
    5
  326. This is just amazing to watch. I wonder how much this repair cost???? Anyone know??? No OSHA or police nothing. Try this in a modern country and you would not last 30 minutes before trouble decended in nu.bers on you. Lol
    5
  327. What about hardening the cogs? It's raw steel for now and can't be used without tempering.
    5
  328. Это мы смотрим!)
    5
  329. А почему не гнутыми электродами варят ?
    5
  330. So amazing he still has all his fingers…
    5
  331. Gotta love the fancy artwork
    5
  332. estos sinverguenzas son unos criminales poniendo en peligro la vida de las personas y engañando deberian meterlos presos
    4
  333. Unprofessional work
    4
  334. SALUDOS DESDE ARGENTINA BAHIA BLANCA 👍👍👍👍👍👍👍
    4
  335. Salam Alaikum I wish I could see how it works on the engine 👍👏
    4
  336. Very professional work, Thanks my friend ♥️♥️♥️♥️♥️
    4
  337. by the assembling not a drop or gram off grrease boys boys !!!!!!
    4
  338. Making everything by hands taking longer time than robots
    4
  339. If they wish they can build F16. HAHAHAHA
    4
  340. I need an Ativan after watching the first 5 minutes. And we think people are assholes over here when they don’t move into the fast lane when a vehicle is stopped on the shoulder. Sooooooo many things could have gone wrong - starting with (and in no particular order) the sketchy points of attachment the jacks were set to. The steel bar extending off the jack. I could go on. Oh my nerves. Thank god they unloaded it. On to the work at hand - they never cease to amaze me with what they can do. Always impressed. Thanks for sharing
    4
  341. ГДЕ ТАМ КОММЕНТЫ ТИПА ... МОЛОДЦЫ РЕБЯТА НЕ ТО ЧТО НАШИ НИ ЗА ЧТО БРАТЬСЯ НЕ ХОТЯТ... ИТД ИТП
    4
  342. Редкастная херня, не закален, обработка ужасная, про допуску по шероховатости я вообще молчу, не отбалансирован. Кусок дерьма проще говоря. вот на самом деле. с тем же успехом они могли протсо напильникаи всё это обточить и сказать что ваще зверь будет
    4
  343. Ни хрена себе компьютер 😊
    4
  344. Nice video 🎉
    4
  345. Mashaallah !!! It's not Donaldson but it's an outstanding work and skill.
    4
  346. Все операции могли делать пару человек,так нет на один вал их 30, вопрос сколько получит каждый ,ключи омбра не иначе.Зачем в стране столько ключей, такое чувство что меньше гаек у них нет.
    4
  347. У работников нет перчаток красят и всё делают голыми руками . Откройте завод по производству перчаток …!!!!
    4
  348. I have never seen a lathe punished so harshly. I wept.
    4
  349. On initially seeing the cylinder head block for the first time, the guy in green thought 'oh no, what a job this is going to be'
    4
  350. You guys are very talented!
    4
  351. Отличная работа.👍
    4
  352. Amazing custom paint job and everything.
    4
  353. That welder is gonna be blind in no time
    4
  354. You guys do good work👍🏻🇺🇸
    4
  355. I love the OSHA slippers.
    4
  356. I have the greatest respect for these hard working people, God bless them all, but having seen so many such videos, apart from the reservations I hold over their safety at work or the abject lack of it, what I don't honestly like is the way they throw thing around.
    4
  357. big fan sir from tarnil
    4
  358. This guy needs to get with the other poster “the mechanic”. They have a sheet metal roller to make them round. Their products are well made, but, so labour intense. I love to watch them, they show how things used to be made here in the USA way back, way back. Thank you for posting and sharing with us.
    4
  359. Ver medidas de seguridad,pobre gente,ni me imagino el sueldo miserable que les deben pagar
    4
  360. Please Pakistani government, don’t allow Chinese scammers to destroy your national industry 🇵🇰
    4
  361. Only 15 mph. 30 day’s used
    4
  362. zero quality. No health care :(
    4
  363. Hell yeah! But get those guys some eye protection please!
    4
  364. Boss: Finished the gears already? Did you manage to hold its overall diameter in 0.005 tolerance as we discussed? Me: 18:05
    4
  365. United State op
    4
  366. Is there anything these guys can't do?😎😎
    4
  367. Great 👍👍
    4
  368. That's not old school , that's a crap repair on something that is not repairable, cranks are cast and then machined, balanced and hardened to hold the torque of the engine, now tell me how in hell a weld is going to do that, he used a press to bend the crank?, then used sandpaper to rectify the journals? LOL.
    4
  369. The manufacturing quality of that cylinder head really sucks, i wouldn't like to have it installed in my vehicle.
    4
  370. Wow I really love the raw talent these people have total respect for their skill they can make fix rebuild anything I can’t get enough of their videos 😊 14:27
    4
  371. What did I miss? The crankshaft repaired is not the crankshaft out of the engine. The crankshaft in the video was cut with a torch, not broken this video is a hoax.
    4
  372. I’m sorry but you people are absolutely brutal on your machinery. You must remember without your machines you don’t have a business. It not a secret why the tool post looks like it does.
    4
  373. Very sad,bad paint, no filters or any kind of environmental protection. Exactly this kind of work ethos destroys the world
    4
  374. bet the guy in the white suit only came out because the video was being shot lol
    4
  375. Caras são feras. Muito bons
    4
  376. Aquele cara da prensa, jogando a peça no chão foi foda.....
    4
  377. Nice❤
    4
  378. Super travail bravo ❤❤
    4
  379. Amazing👍👍👍 Indonesian audience 🙏🙏🙏
    4
  380. The basic lathes they use have a cone pulley driving into a cone pulley in headstock. Gets job done.
    4
  381. Being a Mechanical engineer i know how much it is difficult for us to balance a crank shaft. You have to care lot's of thing and this man is doing with this much precision, hands up for this skill and talent lot's of love from India!
    4
  382. Из всех видео из Пакистана, в этом самое цивилизованное производство.
    4
  383. конверт с вмятиной не грунтован ----- бред
    4
  384. There's often something odd about these Pakistani small shop videos. In this case, it's an old guy using giant tinsnips to cut straight lines in steel sheet. The place clearly has more complex machines - so why don't they have a guillotine? Even a simple hand operated guillotine would considerably improve productivity. Door skins are far below normal quality - just a single colour coat of paint on untreated mild steel - no rustproofing of any kind. Finished door skin shown at end has a clearly visible blemish.
    4
  385. Much respect for the job these men do in conditions that seem impossible, truly remarkable talent displayed. OSHA, who is that???😂
    4
  386. NICE JOB 😎
    4
  387. y'all call it a stay room.. but basically you're adding a Sleeper cab to a standard truck cab
    4
  388. 1:37 "Pimp my ride" farm tractor.😁
    4
  389. Nice work, maybe not high precision, but probably good for getting an other machine going again. At least the ship stock metals are directly used here. The lathe machines may be old but they work, the people operating them can fix them and resharpen the bits when required. In the Western society the waste is terrible, most equipment is obsolete within a short time, and the improvising skills have gone and we are so more reliant on computers. Great video.
    4
  390. Zero safety stuff, they are real superman
    4
  391. They work beautifully. It remains only to harden the bolts
    4
  392. Very good
    4
  393. I very much enjoy hilarious comments of the people from the 'developed' portion of the world.
    4
  394. Ok very good
    4
  395. Love seeing your nice work!
    4
  396. Question: Doesn't the skirt/dress part of the shirt they wear get in the way? Because in all the manual labor jobs I've had in my life, like this one, wearing something like that would have got me caught into the mechanism of machines. ...or worse, killed. So, I've always wondered. It's just seems like a potentially dangerous thing to wear. And NO this isn't in any way trying to poke fun at the people or any other stupid reason Haters would use. I'm actually interested. Also, I don't know what to call the shirt/skirt/dress thing. So could you please tell me. Besides that, this was an epic job done with basic tools. Amazingly impressive work the guys did fixing this.
    4
  397. А какже катафорез
    4
  398. Beautiful work 💪
    4
  399. Amazing machinery. Thank you for the video.
    4
  400. Sin calzado de seguridad y sin guantes de protección algunos, tremendo.
    4
  401. wow a head split in half for all the years of mechanical work i have never seen that happen ..nice acting how did u manage to weld in between to close the water channels
    4
  402. What is this machine for? What are u putting in it and what is the oil coming out used for?
    4
  403. косяк!!! будет наказана...
    4
  404.  @user-gw2pb7ts3t  да, выдал я тётку 😒😨
    4
  405. Wow that’s great
    4
  406. Safety is not a factor for the guys no 🥾, no eye protection 🥽,no gloves 🧤. Like the saying say we don’t need no stinking safety gear, but hey as long as the job gets done
    4
  407. Just answer to few questions from the audience though I am also an audience. These mechanics in Pakistan are very bright and talented individual. They can build anything from the scratch but unfortunately they don’t have the government (especially the current one where the president,prime minister,the chief justice as well as the the army chief are known and court convicted thieves ) as well as the rich investors support otherwise if we were to gather few expert mechanics from each province ( there are 4-5 provinces in Pakistan) and give them financial and other required supports , they can do miracles. Unfortunately many government of the progressive world are even now supporting these types are known and convicted governments for their own benefit
    4
  408. very cool video. as always! Like from me эээ👍🏽
    4
  409. Из торсионных валов делают.
    4
  410. That repair is a fatality waiting to happen.
    4
  411. Those welders must all pretty blood from breathing zinc fumes. Phosgene gas.
    3
  412. Yesterday's cruise ship, today's fifth wheel.
    3
  413. Адская работа 👍🏿
    3
  414. Skillful
    3
  415. Good is very good
    3
  416. Amazing👍👍👍 Indonesian audience 🙏
    3
  417. I d like to Send Joe Pie there with a security detail. To see if its true,
    3
  418. عمل جميل ومتقن بدون عدة متطورة لكن يجب عليهم التطور بالمعدات لكي يسهل عليهم العمل
    3
  419. very good skills. thank you for these good video!
    3
  420. please more videos of this guy he is the BEST machinist !!!!
    3
  421. O trabalho desses cara são top os cara fais tudo manual de tá doido👏👏👏👏👏👏👍
    3
  422. No. He's not repairing he's making a smaller crank out of a larger one. Or vise versa. That's why there flame cut and made in 3 parts to get the timing right. Labour's is cheap there and there are very talented.
    3
  423. Amazing good job👌
    3
  424. working days with red iron, stay careful guys
    3
  425. dangerous nonsense
    3
  426. Quick work is wonderful ~ ♪
    3
  427. The first "factory" ( Pakistan?) in these videos which is reasonably equipped. Although they still have the habit of "throw everything on the dirt floor".
    3
  428. It might works in your country due to your speed limit are moped speed. In California we drive 80 mph or even faster
    3
  429. Weldon brother
    3
  430. I'm Indonesian, I always like videos like this, great 👍👍👍
    3
  431. and for the great work I give 100 stars
    3
  432. Hand made well done 👍
    3
  433. Like a new
    3
  434. It will crack again
    3
  435. 👌👏
    3
  436. Very creative manufacturing pedestals for a post boxes!
    3
  437. Nyc
    3
  438. imagine telling these guys they have to wear boots. lmao..
    3
  439. Look like they're using water to lubricate that drill bit. 😂
    3
  440. Luxury hahahahha That’s why so many Indians come to Australia 🇦🇺 to drive our luxury trucks 🛻
    3
  441. Wer mit dem Hungertod bedroht wird, arbeitet fast so schnell wie eine CNC Werkzeugmaschiene, der Unternehmer weiss das.
    3
  442. incredible skills show by these guys. I live in a throw away society.Love your work.
    3
  443. Brilliant to watch.These guys are machining legends 👍
    3
  444. This is on a Hand Tractors Trailers what happens when the tire is used at the load rating when it has been made thinner. Boom! even at 30KMH one of those Hand Tractors Trailers (Where the Trailer forms the rear wheels and the tractor runs the front wheels) could hurt or kill people if it went out of control because of a blowout. Considering pedestrians, mopeds, and, Tuk Tuks share the road with Hand Tractor Trailers those tires will cause thousands of injuries and hundreds of death in a country like India, Pakistan or Bangladesh. The guy doing this should spend a year in prison for negligence.
    3
  445. Молодцы на коленках делают все.!
    3
  446. Amazinggg 👌
    3
  447. Very informative. Always wondered how tanks were made.
    3
  448. Yokluk insana neler yaptırıyor.bu yetenekli insanlara selam olsun maşallah
    3
  449. This is just pathetic! Look at how bad the paint is, a guy with a spray can could do a better job. And all you have is a door skin, let's see it mounted up, betting the door won't close or a huge gap
    3
  450. Surely they use a calibrated torque wrench?
    3
  451. 👍⚙️💪🏻⚙️💪🏻👌🏻👏👏👏🇸🇦
    3
  452. Does weld hold when you weld right on top of all that rust?
    3
  453. Thats where should people compete instead of wars . Great health to working people!
    3
  454. Nice mechanic mashallah
    3
  455. Good job.😎👍
    3
  456. Welding zinc coated metal. Yeah, that helps your health...
    3
  457. Good working
    3
  458. 18:24 - casting has a substantial defect, which is not present on subsequent footage...did they make more of them?
    3
  459. А вот такой вопрос Вода в масло не попрёт ????????
    3
  460. Gee, that design of battery charger goes back to the 1930's, except for the use of 1960's style stud rectifiers instead of selenium. Don't these guys know you can now buy potted silicon bridge rectifiers at much lower cost? It looks like they are cutting up regular passivated steel sheet to make the core laminations instead of using proper transformer-type silicon steel - as far as I know transformer steel is only supplied already punched into laminations, bonded into C-cores or toroids, or supplied in bulk in huge coils. Using regular steel would be a lot cheaper, but the energy efficiency will be low, due to considerable hysteresis and low permitted flux density. Efficiency will be lowered more due to burrs left during their guillotining, which will short the laminations. Normally, laminations are punched first and then passivated, which ensures good inter-lamination insulation. They are grouping the laminations instead of 1:1 interleaving, which is normally regarded as poor practice in the transformer industry, but given the above points, and that it is a high leakage reactance design (desirable in a simple battery charger) it may be a good thing.
    3
  461. Yo guys... you do good work but please start wearing boots, safety glasses, and gloves when needed. Maybe you won't get injured and I hope no one does but it's better to have the safety equipment than not. It could save your foot, toes fingers, and eyes. If you guys lose your eye sight you will no longer be able to work.
    3
  462. Это они еще про мотор Иббадулаева не знают, а то жара пошла бы
    3
  463. 彼らは限られた環境の中で最高の仕事をします。おそらく最先端の環境中でも最高の仕事をするでしょう。
    3
  464. Frickin primitive engineering. They have not even thought of piercing the blank before bending. The fuys are going in the machine to clamp the blank for forming. Zero safety. No protection while painting.
    3
  465. That's awesome, you're a repair genius
    3
  466. Amazing working skills
    3
  467. Nggak perlu APD keselamatan kerja no sepatu
    3
  468. 14:30 look at the amount of play in that cutter axle. WOWWW!! DIRTY.
    3
  469. Great work
    3
  470. It shd be cut and bend in one mold, very lengthy and basic idea of backward country.
    3
  471. at the end of the video:"Looks like someone's itching, sir " 😂
    3
  472. WOW 🔥🔥🔥
    3
  473. Local and small industry provides jobs and ful fill local needs locally.nice which provides support to society. Nice set up but two things must be adhere. Safety of worker during usage of machines and quality standard of product. Good job.
    3
  474. ABOM eat your heart out on that shaper!😂😅
    3
  475. So very Nice Video Thank for sharing
    3
  476. Босиком в цехе льют заготовки! Ааа... теперь я видел всё 🤣
    3
  477. Она золотая выдет)
    3
  478. prepare for americans and their comments about safety and the rest...
    3
  479. I'm planning a long trip , can you send your technicians out to service my vehicle .
    3
  480. Excellent work with good finishing
    3
  481. Great Video Man!!
    3
  482. Just found your channel and Subscribed. Really nice work
    3
  483. What was the problem with the original bolt holes that such drastic rework was required?
    3
  484. Brilliant skill to watch, but I wonder how long the repair will last on a way over loaded Pakistani lorry in that heat they have?
    3
  485. What sort of lathes are they using, looks like just belt drives with no gearboxes?
    3
  486. Бросаем заготовки, чтобы у рихтовщика вмятин была работа. Гениально. Менеджмент уровень бог!
    3
  487. Молодцы Пакистанские трудяги.
    3
  488. Pakistani the best
    3
  489. Working men getting the job done.👍👍 New subscriber.
    3
  490. What it name of the furnace
    3
  491. пздц!!!
    3
  492. Excellent, he has every reason to be proud of his factory and skill.
    3
  493. Is that a rubber block die section? I always wanted to know how they formed under edges
    3
  494. you're using four ceramic diodes for the FBR which makes it more reliable than the regular ones.... but you didn't include a black cable to indicate the negative terminal which makes it kinda confusing for someone else when they try to fix it assuming that something might goes wrong in the future.... but I guess that won't happen anytime soon since your products are built for the durability... 🤗🤗🤗🤗🤗
    3
  495. Very amazing how some poor workers manufacturing a modern machine without any modern technology . It's very nice and good video. I am appreciating you and all worker who doing work in this video.
    3
  496. Что за евала. ?
    3
  497. When labor is cheap and technology is expensive, repair and reuse thrive.
    3
  498. Like 👍👍👍
    3
  499. Hi guys, can you show us the crash test of these helmets?
    3
  500. Ótimo trabalho
    3
  501. Costei muito bom costei do trabalho de vocês que Deus abençoa
    3
  502. Respect respect respect!
    3
  503. For what kind of application those two gear has been made ?
    3
  504. 🤝👍👍🙋‍♂️
    3
  505. Incredible job !
    3
  506. Крепкий орешек 🌰 эта ось, не снять с неё Колесо , много дней наверное прошло.!!!!
    3
  507. Как он мериет и ЧЕМ! На таком станке такое делать! КАТАСТРОФА!😯😯😯😁😁😁👍👍👍👍👍
    3
  508. Very proud of those people but I don't see any quality and safety. Keep up the good work 👍👍👍
    3
  509. Bahut hi badhiya bhai saab aur iss Meachine ka detail video banao power transmission kisa kaam kerta hai India mey iss ko bahut pasand kiya jaa raha hai
    3
  510. I have always liked your videos but I couldn't make it through all those ads. Way too many.
    3
  511. If you're going to buy this helmet, buy a coffin while you're at it.
    3
  512. The end justifies the means. 10 out of 10 for result.
    3
  513. Так это, подборщик половы, соломы и т.п.
    3
  514. Some find craftsmanship right here! Well done folks!
    3
  515. You guys are amazing , wow. !!!!!!!
    3
  516. Wonder how many times that crane has been wildly overloaded.
    3
  517. That are some high quality protective work boots
    3
  518. My God, I wouldn't let these people make me a sandwich. It's funny when I see people comment" what skill what craftsmanship I wish I had half of the skill they had."... The title of these videos should be more in the line of "third world butcher makes hand grenade.... "
    3
  519. Czy to cześć do MTZ?
    3
  520. Живут кайфуют ибо зимы у них не бывает и морозов по -40 нетт
    3
  521. Good job but quality??
    3
  522. Apakah kamu baik-baik saja? , hariyangbaik
    3
  523. Wonderful Machine prepared by great hard work and Skill, although it has complex technology and manufacturing but is very much useful for Bricks Making Industry, it will definitely reduce the Labour Cost and increase Quantity of Production, so Bricks Price May Reduce, The Manufacturer Should Pay Attention on Machines, Like Lathes, Drill Machines and Grinders etc, Use Raw Material (New One) and PPEs for Workers, they (Workers) should also be well trained in like, Fitting Parts, Bearings not to be Hammerd and produce Welding Joints as per Standard Practices so that their Skill may become Solid and Proven one. Thanks a Lot for the Video and Effort carried out in preparation of Video.
    3
  524. Надо технологов АвтоВАЗа к этим чувакам на стажировку отправить. Чтобы научились блоки двигателей 1.6 отливать...
    3
  525. Полная локализация производства.
    3
  526. I wanna donate pneumatic tools to them.
    3
  527. Nice to see folks put some steel that will last into projects.. Build it once..👍☺️
    3
  528. Опять одноразовые сварщики в деле
    3
  529. Lộc chúc bạn làm việc mạnh khỏe
    3
  530. Great 👍
    3
  531. Incredible! Such hard work and expertise which created such an amazing and functional piece of equipment. I wonder what this costs in local currency? Thank you so much for the video.
    3
  532. 🎉VIEW FROM HYD TG INDIA🎉
    3
  533. Done perfectly . But missing grinding operation
    3
  534. Don’t drive it farther than your willing to walk.
    3
  535. Doing work like that with NO PROTECTIVE GEAR...are you serious guys?
    3
  536. Amazing ethic and craftsmanship. If ever these Indians get going in the same direction, they'll be more formidable than their European Aryan brethren were in the 19th and 20th centuries. The Chicoms better think twice before getting too cocky with these folk.
    3
  537. Точно!
    3
  538. اپنی ھر ویڈیو کے ساتھ پاکستان لکھا کریں کچھ کنٹری والے انڈیا بنگلہ دیش افغانستان سمجھتے ہیں ان کو یہ نہیں پتا کے یہ ھمارا پاکستان ھے 🙏 برائے مہربانی میرے اس کمنٹ کو پڑھو اور اس پر عمل کرو
    3
  539. Aap logo ki mehnat aur kabiliyat ko dil se salam love you from INDIA 🇮🇳👍💖
    3
  540. why they like to work on ground they should have table to work on
    3
  541. Looks and sounds like an oversized go-kart😂
    3
  542. Воды бы еще налить в ванную где резак.
    3
  543. What make and model of bike has this tank fitted or is it an aftermarket tank?
    3
  544. That crank will not hold for very long or create sufficient oil pressure. There is a reason to grind a crank to specification and not cutting it. Beside this crank must be rebalance which is not done at all. Nice work for the show room.
    3
  545. Awesome video, start to finish, and showed the finished product in action, that’s what I like!!!!!
    3
  546. It seems that it is more profitable for them to replace "broken" people than to buy safety equipment for them.
    3
  547. They sure do a lot of those Massey tractor threes.
    3
  548. Not sure why I’ve been watching these bro ha I praise you for your hard work all of you 💪🏼
    3
  549. Bhot aala janab....you are doing Great work...
    3
  550. Thank you for your sharing. I always feel much more relax seeing your work rather than spend time on tiktok
    3
  551. Beautiful machine work I love manual machining work cnc sucks
    3
  552. is this a CAT authorized service center ? 😃
    2
  553. ye kaha pe bnti hy bhi ...location konsa hy
    2
  554. Quality works Excellent 👌👌👌👌
    2
  555. Pakistani guys are fantastic. The skill and know how is fun to watch !
    2
  556. My dream truck in the background. A 1987 "pick up" haha
    2
  557. а мне интересно в асашае и колониях все ни дня в жизни не работали получается? откуда столько восторга обычной работе токаря? причем очень грубой работой.
    2
  558. This is the third time I've seen this procedure. Do you guys swap the videos around, or do you all show up at the factory on the same day?
    2
  559. برادہ ہاتھ سے کیوں اتار رہے ہو کھنڈی کیوں استعمال نہیں کرتے
    2
  560. Good job
    2
  561. 0:49 "experts" ...
    2
  562. I hope these guys have access to a good eye doctor.
    2
  563. Amazing ingenuity Pakistan 🇵🇰 👏 😮
    2
  564. Nice👍️
    2
  565. Дюймострадания. 3/8, 7/8, 7/16
    2
  566. Интересно, а в Тойоте знают, что их грузовики подделывают на коленке?
    2
  567. That is one he'll of a job ,nice going
    2
  568. When those parts at advance auto and autozone say made in india lol
    2
  569. Mantapppp.. Kerjaan sekeras itu masih pake tangan kosong. Salutzzz
    2
  570. This happens only in Pakistan.
    2
  571. Да здравствуй Пакистан.
    2
  572. Not sure why they weld the bolts in the frame, either putting a nut on them or leaving the holes empty would be stronger then poorly welding rusty crap
    2
  573. Absolutely Brilliant repair! I am wondering if you ever find the need to pin together the 2 pieces as well as welding? Great job
    2
  574. Fillet..pattern..core..pour...strip..size..drill.. proof...fit.. DONE... HMMM JUST EYEBALL AND VERY OLD TECH... CHINA 75 YRS AGO... INDIA SAME... HERE THEY COME IT AINT GERMANY...YET
    2
  575. Ma come si può avere una di questa però dentro deve essere vuota non Deve stare niente
    2
  576. بسم الله الرحمن الرحيم . الحمد لله والشكر لله رب العالمين والصلاة والسلام على سيدنا محمد وعلى آله وأصحابه والتابعين أجمعين ٱمين ٱمين ٱمين . هؤلاء هم الرجال الرجال الرجال . هؤلاء هم أساسات وقواعد الأوطان فتحية عميقة من القلب . أعانكم الله حفظكم الله ٱواكم الله ٱٱٱمييين ٱٱٱمييين ٱٱٱمييين ...
    2
  577. Oh i saw it at 6:08.👍
    2
  578. Nice
    2
  579. Le kanabi. Le kif🌿🌿🌿. Le hachich. Le kharchach. ça donne le plaisir de travailler de cette façon. Sans aucune protection. C’est pourquoi ces pakistan 🇵🇰🇵🇰🇵🇰 travaillent de cette façons. Avec les habilles de nuit et par terre. Comme des esclaves.
    2
  580. Wow exelente trabajo señores felicidades 🇨🇴🇨🇴🇨🇴
    2
  581. сварка будущего.
    2
  582. Amazing thank you 🙏👏👏👏👏👏👏be safe ☝️
    2
  583. Awesome video.
    2
  584. Вот смотрю и прям жаль рабочих, нормального инструмента нет , СОЖ нету грустно ((( , а так молодцы из говна и палок умеете собирать
    2
  585. Добра работа.
    2
  586. Very good ❤️
    2
  587. Test it
    2
  588. Почему нижняя половина бака такая кривая?
    2
  589. Зур 👍👍
    2
  590. Самое дорогое наверное это шпатлёвка. 😅
    2
  591. 😀
    2
  592. Wow
    2
  593. Can anyone tell me why on all these videos, the people speaking sound like Mickey Mouse on Helium? Ive adjusted video speed but I can't find any setting that makes them sound like what I feel would be normal....IDK.
    2
  594. Forget about the negative comments, this way we will slowly dominate the world because it is written.
    2
  595. Too much facing cutting. How is possible to use. Deep cut not for use
    2
  596. Cool to se The process.
    2
  597. Asslam o alikum bhai.bhai tank main fuel gauge bhi dain.
    2
  598. Boa tarde como poderia encomendar um tanque para shadow 600 VT com capacidade para 20 litros no mesmo formato do original forma de gota mantendo a parte de baixo na mesma largura ou dois centímetros mais largo aumentado um pouco lateral e para cima para não fugir da forma de gota
    2
  599. MaşaAllah.
    2
  600. 👍👍👍
    2
  601. The fact alone that you are driving that wreck on the road is a deadly sin. But it is a good example of how shoddily there are built. You could pay me a million US$, and I would not ride in one of those. Never ever.
    2
  602. ottimo lavoro artigianale ,ma è duraturo?
    2
  603. Wonderful video.
    2
  604. Bom trabalho
    2
  605. Гугліть "армія соцмереж" та доручайтесь до супротиву у соц мережах! (зробленно волонтерами за ради волонтерів, донату нема)
    2
  606. Very good. Thank you.
    2
  607. Very good 👍👍
    2
  608. In India there are no work tables? ,, they always work on the floor ,, and barefoot
    2
  609. Thank you.
    2
  610. Нет слов. Такие сложные станок делает на такой плохой условия.
    2
  611. Great work considering the available resources; efficiency ? By local rules, probably quite efficient. Would a caliper or dial indicator make a difference ? Hardly.
    2
  612. Will they ever learn unfortunately not
    2
  613. Could You please tell Me what is the dark liquid that is added to the sand in the blending machine at the start of this video ? Great Video's. Thank You.
    2
  614. 👍🇰🇿
    2
  615. Молодцы
    2
  616. 🌴الباقيات الصالحات 🌴 سبحان الله 🌱الحمد لله 🌳ولا إله إلا الله 🌴 و الله أكبر 🌿
    2
  617. How can I buy?
    2
  618. thô sơ và lạc hậu...
    2
  619. 🙏🙏❤️💯💯❤️💯👍👍you guys are The best working with metal amazing job god bless you hand 👍👍👍
    2
  620. ❤️
    2
  621. An also the bigger one as well.
    2
  622. You guys are amazing! 😮
    2
  623. и чо блять? на самом интересном месте....
    2
  624. Assalam alaikum
    2
  625. In thumbnail gear is different
    2
  626. Interesting video maza a gea malik g
    2
  627. What is the purpose of cutting the first diameter at 2:47?
    2
  628. Giant crankshaft, I know they are very very expensive to make, how much it weighs? 10 tons?
    2
  629. an actual surface grinder!
    2
  630. Bagus bos
    2
  631. Yes. vehicle axles. there are scraps of iron turned by everything. even these peasants wear this sharp debris in their pajamas. no protection. there is great strength and courage hidden behind these working peasants. this strength and courage is 🌿🌿🌿🌿 grass. kharchach. kanabi. hashish.
    2
  632. Крутий ковш 🙂👍🏻
    2
  633. تحية من القلب هنيئ لكم اللهم انصرنا بالعلم على من اراد بنا شر بارك الله بكم سوريا دمشق
    2
  634. Awesome tool making procces
    2
  635. Good morning
    2
  636. *VERY cool video *💥💥💥 We do almost the same thing))
    2
  637. this was painful to watch !
    2
  638. Какой это год? на этом станке ещё ПЁТР-1 работал \правительство Вы издеваетесь над людьми\ ведь есть современное оборудование стыдно должно быть красоваться в интернете
    2
  639. I see Jim and Mike)))
    2
  640. 👍
    2
  641. :hand-purple-blue-peace::hand-purple-blue-peace::hand-purple-blue-peace::hand-purple-blue-peace::hand-purple-blue-peace::thanksdoc:
    2
  642. thank you for uploading the vedio :)
    2
  643. Pretty cool little setup there.
    2
  644. For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. John 3:16 KJV, Ephesians 2:8-9, Jesus Christ is the only way.......
    2
  645. 🤩🤩👍👍👍👍👍👍👍👍👍👍🇸🇦
    2
  646. А в какой стране сняты эти кадры? Индия? Иран? Рабочие на заводе - мусульмане? Просто я слышал, что мужчины-мусульмане считают для себя достойной только профессию воина, торговца или посредника, а работу на заводе, вообще, занятие каким-либо ремеслом для мужчины в исламских странах считают неприемлемым. Но здесь мы видим отличную, слаженную работу мужского коллектива. Это мусульмане?
    2
  647. Master piece of Engineering ,
    2
  648. АвтоВАЗ собирают
    2
  649. So werden für Deutschland die Auspuffanlagen hergestellt . Top Bestell mir dann gleich bei den eine Gruppe A dann kloppen die sich die Finger wund 🔨
    2
  650. amazing
    2
  651. Bahut hi badiya kaam aur detail videos banaiye hamey aap key videos sey bahut kuch sikhney ko mill raha hai(from India)
    2
  652. Itulah yg terjadi jika bekerja hanya menggunakan tenaga dan bukan pikiran
    2
  653. use a mask uncle, the dust is dangerous if you breathe it often
    2
  654. Tell me, what do you use as solder and flux?
    2
  655. A Mericle. Some of the workers are actually wearing shoes (Protective gear). They are entitled to much respect.
    2
  656. I like this video👍👍👍 Indonesian audience 🙏
    2
  657. I would love to know how long that head will run in a truck.
    2
  658. Bravi ragazzi💪💪💪💪💪💪💪💪❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
    2
  659. It will break again...
    2
  660. Americans aren't capable of making things by hand like this.................................
    2
  661. I would come out of retirement open a new shop provided I would (could) hire these particular men to work for me. Give them modern proper tools, equipment, safety attire (steel toe boots), gloves and a clean work environment, I would make a fortune having them work for me...
    2
  662. 👏👏👏
    2
  663. 🇰🇿🇰🇿🇰🇿👍🏻👍🏻👍🏻
    2
  664. Excellent
    2
  665. Hard worker's.
    2
  666. Veray good work is Rights ❤
    2
  667. Сердце Сибири👇Центр Азии https://youtu.be/SwFjxvE6fKI
    2
  668. Nice disk, what would that cost in US dollars?
    2
  669. These poor uneducated workers not wearing PPE’s
    2
  670. YouTube knows you like it without you being aware of it 🤣
    2
  671. This is what the internet was made for!
    2
  672. I think the Pakistani nuclear program also did not do without cow cakes.
    2
  673. Pra ficar melhor É só usar óculos de proteção e protetor auricular .
    2
  674. Коленвал походит ещё!
    2
  675. 👍👍👍👍👍
    2
  676. Amazing👍👍👍 Indonesian audience 🙏
    2
  677. Assalomu alaykum......... 👍🇺🇿
    2
  678. علاه ما نكون كيفهم ونخدمو قطع غيار
    2
  679. Good Job
    2
  680. I’m not quite sure I understand why he used two different crankshafts to repair one. But whatever. I liked his crankshaft straightener device. That was pretty neat.
    2
  681. Keep safe discovering skills
    2
  682. Perfekt.
    2
  683. Anyone know what kind of seed they are pressing? Would this oil require some further processing before it's use as what,... a deep frying oil for food prep I gather?
    2
  684. do easy but sell to who/ it can not eat any way
    2
  685. 👍🏽👍🏽👍🏽
    2
  686. Nice isko bolate Hain video
    2
  687. Jordar satme gaid karte aur bi Maja ata
    2
  688. I like pakistani tallent person
    2
  689. Super travail , toutes mes félicitations ( France ) 😀👍👍👍👍👍👍
    2
  690. 🤔🤗🤗👌👌
    2
  691. what liquid is being sprayed?
    2
  692. Very good, for employment generation micro industries are necessary.👍
    2
  693. If I had my way I would ban this company from posting on YouTube. That is cruelty to that horse. They need to be reportedly. As a matter of fact, I am protesting against that company and their product. That is shocking how they are neglecting that horse. They should be fined and have that horse removed from them and cared for.
    2
  694. 도장이 눈물자국있고 개판이네
    2
  695. Brilliant video thank u 😍👀👀👀👀👀👀👀👀👀👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
    2
  696. im machinist . and one of the things that my teacher first taught me is to clean ,oil the machinist well. with one is safety being the most important thing....
    2
  697. Profissionais artesãos, habilidades invejáveis,que Deus proteja todos
    2
  698. The partition was a huge mistake.
    2
  699. am besten find ich immer die Sicherheitsschuh - da freut sich doch jeder Sicherheitsbeauftragte
    2
  700. تبارك الله اعليكم عمل رجولي
    2
  701. Что-то пропустил, какой марки сталь льют?😆😆😆
    2
  702. These guys certainly have dedication for manufacturing these tanks. I’d lose my enthusiasm for such a repetitive job after a week. I suppose their happy just to be in regular employment but I’m glad that in most modern motorcycle factories, machines do all this sort of manufacturing rather than humans.
    2
  703. А для чего это лопата нужна ? Я так и не понял
    2
  704. ​ @DiscoveringSkills why are you thanking him? He asked what the machine is used for
    2
  705. Very good, thank you.
    2
  706. 53:00 Are those pins tight enough?
    2
  707. 🤗👻🤓🤝👍👍
    2
  708. Great content, thanks!
    2
  709. Wow...real craftmanship..
    2
  710. There are many hardworking fabrication engineers in Pakistan love from india 🇮🇳
    2
  711. I have experienced this sort or lathe work first hand in India, they can turn out anything with minimal equipment fantastic work
    2
  712. Nice..
    2
  713. Well done Brothers, love you and your work , love from Vietnam .
    2
  714. اللہ تعالی آپکے مال جان میں برکت عطا فرمائے آمین
    2
  715. weird it broke between the two same stroke lobes, wonder if one cylinder hydrolocked
    2
  716. Its call real horse power 😅
    2
  717. Техника безопасности? Нет, не слышал!
    2
  718. At the end of the day they smile and say: I produced 100% shit!
    2
  719. All kinds of industrial machinery. There's standard sizes and pitch and doubtful if they're not making quantity of these parts.
    2
  720. Admiro.muinto.vcs
    2
  721. Bom trabalho amigo
    2
  722. Absolute SAVAGES! I have been to Iraq and Afghanistan as a convoy commander and seen the jingle trucks, plus the buses with cars on the roof. Not to mention the women, cause the overflow if you're female, you go on the roof! Yea, I have the pictures! So prise them if you will, but remember, there life expectancy is is there late 40's, early 50's. Wonder why?
    2
  723. It's junk spot welded, junk
    2
  724. When the US falls apart in a few more years these guys will be reaping in the rewards of knowing how to make crap.
    2
  725. Ma sha Allah great job 💯👍
    2
  726. M.tayyab
    2
  727. Das sind die Facharbeiter die nach Deutschland kommen !
    2
  728. Nice❤❤. video❤❤
    2
  729. Awesome ❤❤I love Pakistan ❤❤❤❤
    2
  730. Great 👍👍
    2
  731. Excelente video colega que opinan de estehttps://youtu.be/-wHrzmyZ9bg
    2
  732. Impressive but I don't think the it will last specially in a heavy diesel application
    2
  733. No FMCSA there!
    2
  734. Сердце Сибири.👇Центр Азии https://youtu.be/SwFjxvE6fKI
    2
  735. Cool work thanks 👍
    2
  736. Mantap broo 👍🏻...
    2
  737. Safety sandals.
    2
  738. Kia ye Bedford bus ki new body bnaaty hain??
    2
  739. that's why employ jaheem to dolly the dent out. without jaheem kerpal and mohamed would have to be more careful and this cost's time and money.
    2
  740. look at the horse ! ✋
    2
  741. P A R A B E N S PELO BELO TRABALHO.
    2
  742. A great crew of men
    2
  743. Impressed with the skill level and speed of the employees. Being from an industrial background and in charge of OSHA compliance I can see a lot of potential for fingers and hands to go missing. I know that OSHA is hated by many employers but their job is to provide a safe work environment. The employees have a responsibility to pay attention also. Take a moment to review the OSHA website in the incident report section and you will see why they are needed.
    2
  744. That's a $15,000 bucket in America.
    2
  745. Thank you for sharing this video
    2
  746. Maschallah Respekt Meister ❤Bravo
    2
  747. Fantastic skills and so talented workers.
    2
  748. 16.04. looks like a wheel for a Devils ice Speedway Bike...
    2
  749. Support from USA Walking Tour! Like See More Videos Soon!
    2
  750. Wondeful safety shoes !
    2
  751. Do Muslims say anything at the beginning of Ramadan? Well, God Bless ☪️ 🕌
    2
  752. Great Video Thank You!
    2
  753. Great 👍
    2
  754. For Pete's sake will someone PLEASE buy these guys a pair of work boots. I'd love to send an OSHA inspector over there. Wouldn't make it 10 feet in the door before having a mental breakdown.
    2
  755. Good❤
    2
  756. At 10.44 child labour is used which is prohibited world wide. When we have modernised ,why this type of physical labour. Lot of robo machines available and production cost could be cheaper. Very safe to humans. Hope this is not in India.
    2
  757. I’m really glad you wrote aqua cruise ship…otherwise I would not know it’s from a 🚢
    2
  758. Thought he was making a door . Only made the outer skin . Even then they used a press so nothing special about this .
    2
  759. Very old tools/The iron used is thin/Wheels are warped. not the center will swing/best colouring
    2
  760. ,👍👍👍👍 мастер класс молодец профи
    2
  761. Que loucura se isto for quinta roda aqui nas nossas carretas vai voar pedaço de solda e.chapas pra todo lado
    2
  762. Excellent 👌👌👌🌷🌷🌷
    2
  763. Great 👍
    2
  764. Eu gosto do trabalho desses homens Tudo manual e no capricho.Parabens De Teresina plaui Brasil
    2
  765. Sensacional parabéns
    2
  766. Investir dans le MAG ou MiG serai un plus , En tout quelle énergie. Bel exemple pour l industrie francaise
    2
  767. All Your Manufacturing Videos are Amazing 🥰😘😘😘 Pin my Comment 😄 📌
    2
  768. Is that bower goat in the background i see?
    2
  769. I thought they might build this better than some of the other shit they do because of the decent shop and nice equipment but nope, they take the same "pride" that they do in everything else.
    2
  770. In a world where many parts are simply replaced, this machinist demonstrates the value and beauty of traditional repairs, where experience and ingenuity are the main tools.
    2
  771. Just made from mystery scrap metal?
    2
  772. Number 1 rule in machinist world, keep your hands off the moving parts. I love my hands
    2
  773. gaddani hai??
    2
  774. Full shop of metalworkers and they hammer the sheet metal on the ground in the dirt.
    2
  775. How much do they charge for a hand made disc harrow ?
    2
  776.  @DiscoveringSkills  wow, that would be a tough price to match if produced anywhere in the world.... incredible...
    2
  777. Great work. Please consider using eyes protection at least...A cut in the eye is not the same as a cut in the skin...
    2
  778. Take care of lathe😑
    2
  779. Congratulations
    2
  780. I need this machine how much cost in pak
    2
  781. Might be fun working in a motorcycle factory.
    2
  782. Very good nice
    2
  783. which country? full address please
    2
  784. WONDER how MANY OSHA'S EMPLOYEES WATCH THIS STUFF
    2
  785. wow 🔥
    2
  786. Great job 👍
    2
  787. Minions😅😅😅 BANANAAAAA👍👍👍 Good door!
    2
  788. Nice work
    2
  789. Эиа порнография хоть успеет соляру сжать?
    2
  790. Great playback technology
    2
  791. ДАЁШЬ В ПАКИСТАН ГАЗ ИЗ РФ !
    2
  792. Excellent work. But consider: only genuine with the original sand from Pakistan. Only one question: How do I use this hot pot, probably not with charcoal, how else is it heated?
    2
  793. 10 points
    2
  794. Спустя столько лет, мы увидели, что это за железяки и как их применяют...
    2
  795. 🤔🤨🤕👋👍🤝
    2
  796. бл, ну где такую дохлую лошадь то взяли)
    2
  797. It’s *break not brake in the title.
    2
  798. No safety glasses, no face masks, no gloves, no steel shoes, no hard hats ! How many of these men are dead now ?
    2
  799. What temperature did you heat the head to? About 150 dungs?
    2
  800. Do you workers get tired of working in the dirt, don’t they have concrete over there.
    2
  801. Legends 🎉at work!!!! 😅
    2
  802. 😻🤩Коленвал от Наутилуса ? Что это они задумали ??? Не Индусы, а черти (в хорошем смысле). А Батька, доси мотоцикл не может сделать, без помощи китайцев.
    2
  803. What a skill, amazing Pakistanis skills.
    2
  804. Nice work , can you not buy bigger sheet steel to save the joining of 2 metal sheets
    2
  805. Amazing like🤝🏻🙏
    2
  806. What about balance of this feel disks?
    2
  807. مشا الله.
    2
  808. Yeah these helmets will surely save my life if I had an fall while riding my interceptor at 150kmh.
    2
  809. The night after tecobell be like 😂
    2
  810. M.tayyab 👍👍👍👍💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚
    2
  811. 😂
    2
  812. So that's where my toothbrush went !
    2
  813. Me encanta como reciclan chapas viejas y las transforman en productos nuevos! 👏👏👏👏👏
    2
  814. They do a lot with whatever they have for resources
    2
  815. Why is there a bed in a machine shop 🤣
    2
  816. Very impressed with the workmanship. How many man hours did the whole process take, from start to finish?
    2
  817. So impressed 🤩
    2
  818. Cars will still be running there for quite some time after the apocalypse.
    2
  819. Браво. Молодцы Пакистанцы. Даже ткатские машину делает на коленках.!
    2
  820. Wow those are beautiful pieces of precious metal.
    2
  821. What the heck are they doing with their Hino Truck roofs to necessitate the creation of a cottage industry of replacement roof stampings? in Pakistan(i Think..)?
    2
  822. I take it that's a wet brake?
    2
  823. Greetings from Moscow
    2
  824. Yeah! I have been waiting eagerly for a new video for weeks! Thanks! 🙏🏼
    2
  825. how many toes are lost in India and Pakistan each year any statistics i only ever see sandals
    2
  826. Very good I'm from iran
    1
  827. 장인정신
    1
  828. send the price to me ,for the mobile bricks machine $. dollar to new york city thanks.
    1
  829. 👍👍👍
    1
  830. Super.
    1
  831. The mechanism of interlocking the master pivot pin of the carriage man too much parts involved.
    1
  832. Untuk buat apa ya?
    1
  833. I don't believe hahaha
    1
  834. Great to see the skills but this is how people get maimed and killed. India claiming 10 top ranking in world . This is how. By ignoring any world wide quality or workers inspections. The reason I voted for Brexit. Unless the rules are the same there is no comparison or fair trade.
    1
  835. Good job 👍 new subscribe.
    1
  836. Great
    1
  837. Excellent work
    1
  838. The name of this channel should be "BEFORE Discovering Skills"....
    1
  839. Full marks 👍🏼👍🏼👍🏼
    1
  840. At 17:04 you will see the step that I think you missed.
    1
  841. These tanks are probably for goods rickshaws or similar... respect their skills and hard work, but the product can never meet the standards required for original part for any bike company...
    1
  842. Just noticed the second last angle grinder wasn't tagged. 🤨🤔🤣😂😎
    1
  843. Masha allah very nice
    1
  844. Going backwards -
    1
  845. ПОКА СМОТРЕЛ , ЗАЙЦЕВ ОТ СВАРКИ НАХВАТАЛСЯ ....
    1
  846. you don't need to lap valves after a fresh grind and the seats are too wide
    1
  847. Interesting 🙂
    1
  848. Super👍👍👍
    1
  849. Greet
    1
  850. У меня вопрос. Металл оцинкованный что ли ? вроде по цвету оцинкованный. Да... двери всегда разные, геометрия плавает. Гильдия ремесленников. Зато эти индусы\пакистанцы не пропадут. Есть работа. Есть промышленность в стране.
    1
  851. Are they a terminators? They are working without protective glasses... Way? So don't value your health?!!!!
    1
  852. ITALY 2022
    1
  853. Good work
    1
  854. Americans can't believe they works with sandals 👡😂
    1
  855. Thanks
    1
  856. Appreciate seeing the positive lead connection in the videos.
    1
  857. Que buen invento
    1
  858. Can someone send them a set of sockets and a ratchet handle ffs?? 😊
    1
  859. Nice . I like it
    1
  860. Başarılar
    1
  861. Highly skilled they make it look simple. I wonder what brand of motorcycle it is.🤔🥂👏👏👏
    1
  862. Is the plan for this truck to be used to make lengthy delivery drives?
    1
  863. Excellent gears and very well made.
    1
  864. Them welds tho 🤣👍🏾
    1
  865. Que gambiarra!!! 🇧🇷🇧🇷
    1
  866. Thats what you call solving a problem with a positive attitude… Not like people here in the states crying for not having the SPECIAL TOOL ☝️💪
    1
  867. This is not a gear!!! It's a sprocket! Chain will be in contact with 85% or more of the total area. Would I use it on my crane, sure, but I wouldn't trust it for heavy lifting!!
    1
  868. very clever people
    1
  869. Beleza 👍👍👍👍👏👏👏👍
    1
  870. 🤝👍👍👍🇺🇿🙋‍♂️
    1
  871. Из полуосей делают ключи 🔥
    1
  872. Saludos cordiales desde ARGENTINA BAHIA BLANCA 👍👍👍👍👍👍👍👍🇦🇷
    1
  873. Very professional work, Thanks my friend, Big liked+♥️♥️♥️
    1
  874. Christ, wish I hadn't watched this now!
    1
  875. ❣️❣️🌺🥀👏💕👍🌹
    1
  876. Very impressive repair. The customer must have really wanted or needed this particular cylinder head.
    1
  877. Absolute astonishing what Pakistan's super high skilled professionals are able performing while crawling in the dirt. For most tasks they only need a sledgehammer and some handfulls of dirt, instead of crappy tools from decadent western world.
    1
  878. Un saluto dalla Sardegna da un tecnico della Toyota
    1
  879. Good
    1
  880. Aapka kam dekh kar bahut achcha Laga
    1
  881. Anh này âů lâ'y tay không don phôi tiên .tai My là bi khiên trách khônh sůã đôi së bi cho thói viêc vì Insurance không đông ý.Tiên và phay bánh nhông khóng khó cân ky và thân trong....
    1
  882. WHERE CAN I GET THIS FIREWOOD? WILL COAL DO?
    1
  883. It's Buffalo chips. Animal (probably cow) dung.
    1
  884. Its a cow shit dried up on the sun, typical Indian charcoal😂😂😂
    1
  885. Good job
    1
  886. Não sei por que eu assisto esses vídeos.
    1
  887. My eyes hurt after watching the weld arc on my telephone.
    1
  888. Very nice werk guys!!!
    1
  889. Wow
    1
  890. Aman aman ne kalite ne kalite arkadaşlar medeniyet ve çevre ve atölye temizliğinde size beş yıldız vay canına abim sizlere medeniyet nezaman ve hangi asırda gelir hayretler içerisinde sinsice sizleri izliyorum adam şu çalışma yapılan yerlere beton atar bir çevre düzenlemesi oluşturulmasını bilmezdi müslümanlıkta temizlik şarttır ben takip ediyorum bütün iş yerleri pislik içinde işçilerin kıyafetini hicsayiyorum bu nasıl bir çalışma hepinize pes yahu diyorum 🇹🇷🇹🇷🇹🇷🇹🇷
    1
  891. Machines left by British repurposed and others imported from China. Only simple spot welders locally made
    1
  892. ❤❤❤
    1
  893. Good 👍👍👍👍👍👍
    1
  894. good
    1
  895. TOP 👍
    1
  896. I watched the whole process do they think this helmet can protect the head? Lol those helmet are very thin very unqualified to use as we called protective gear
    1
  897. that's pretty cool brother
    1
  898. Filling it with bondo won't stop it from falling apart
    1
  899. Is that Germany?
    1
  900. Some serious pounding in the back
    1
  901. 👍👍👍👍👍💗🚜
    1
  902. very creative
    1
  903. I often am impressed by the work these guys do but have a few questions…how many foot related accidents considering the non steel toed sandals and I wonder if these guys ever had a set of Allen head sockets if half the workers would be out of jobs
    1
  904. I ADMIRE YOUR WORK BUT THE WAY YOUR HORSE WAS TREATED AND THE WAY HE WAS LOOKING I WILL HAVE TO GIVE YOU GUY'S A THUMBS DOWN!!!!..PLEASE TAKE CARE OF THIS HORSE 🐎 😢
    1
  905. First Comment
    1
  906. India?
    1
  907. Where is this? Imagine what this bunch could do if they were in an American shop that’s fully stocked!
    1
  908. Dangerous I see no danger cones to warn motorists to keep clear...life is cheap in Pakistan
    1
  909. You need a plasma cutter, much faster and more clean of a cut. Did I mention easier 😊😊😊
    1
  910. اقسم بالله العظيم بحياتي ما قلت شي وطلع خطأ. باكستان سوف تكون من اول الدول الصناعية في العالم . باكستان لا يعرف المستحيل
    1
  911. A DONKEY CART! thats some old school transportation right there.
    1
  912. This is the lahore to Rawalpindi via Gujranwala GT Road. And it's very busy and much important Road in pakistan. Such things are very common there but motorway police is busy to issue heavy chalans to the commercial vehicles. Because they are looting money 💰 through very samart way. But there is no Road issue for them
    1
  913. The guy that isnt dirty always standing in the background makes me nervous
    1
  914. Good job! Thanks!
    1
  915. Naic
    1
  916. I guess UPS doesn't deliver there....
    1
  917. was that second truck they offloaded the original truck into , a shipping container on wheels ?
    1
  918. Anyone know where this was filmed?
    1
  919. The guy, who drew the arabic numbers, is an artist. Btw. these numbers were not invented by the Arabs, but from the former Indian people.
    1
  920. Work in safety, what's that?
    1
  921. Good job 👌
    1
  922. Setiap pintu ada selisihnya nggak pernah sama
    1
  923. The useful life of this equipment must be poor... Misaligned bearings... Tolerances disregarded... But that's what they have for lunch... so be it! Is life!
    1
  924. 10 Tan Mall India Wich Hai 6 Chaka Trucks Nu Te Tusi Pakistani Veero 20 Tan Mall Paake Truck Di Halat Kharab Karti ,,
    1
  925. Imagine giving these guys access to Fireball Tools' workshop.
    1
  926. when given lemons, make lemon juice and they are good at it.
    1
  927. What value do you put on these in American dollars plz ?
    1
  928. they don't know how good they are
    1
  929. 👏👏👏👏👏👏
    1
  930. Watch your toes ...
    1
  931. yes, but their manufactory technics was used in 20 th century
    1
  932. 😼Не то слово !
    1
  933. Thanks 🙏
    1
  934. Wow amazing fst comments 😂
    1
  935. 👍⚙️💪🏻⚙️💪🏻👌🏻👏👏👏👏🇸🇦
    1
  936. a very long and tiring process, of course, for the workers it's not too hot to wear long clothes
    1
  937. Very lax approach to Health & Safety. Fancy allowing smoking in the workplace!!
    1
  938. those machines are completely trapped out
    1
  939. На какой мотоцикл бачки? 🤔
    1
  940. 정량을 실어 라
    1
  941. You wouldn’t have to sharpen your bit so much if you use something other than used oil for lubrication??!!I’ll send you some and tell me where to send it
    1
  942. good
    1
  943. 👏🏻👏🏻👏🏻🥇🥇🥇
    1
  944. The thumbnail made me watch your video
    1
  945. To any scammer in here, contact these people and show them the tons of destroyed Russian tanks in Ukraine. Sign a deal with 10 percentage upfront payment
    1
  946. This gives all new meaning to Ram Jam!!!
    1
  947. 👏👏👏👍🇹🇷
    1
  948. Why cant i see how many subscribers you have?
    1
  949. Where is this workshop located? If someone have to contact... Please give in some details
    1
  950. Cool, can you make me one for a 96 zzr600, cheers
    1
  951. 🤝👍🙋‍♂️
    1
  952. 👍 n°🥇 , professional .
    1
  953. 👍👍👍👍👍
    1
  954. What fuel are they using for preheat?
    1
  955. Как говорил мой отец где варится,там и.валится,кулибины б....
    1
  956. Теперь я знаю: ничего из Индии покупать нельзя.
    1
  957. Very good heavy mechanic how work safety have good technical how work safe and ideas
    1
  958. 0:23 do you remember the Frogger game?
    1
  959. first
    1
  960. Think I will stick with my woolly hat
    1
  961. Adamlara nükleer silah yaptılar diye ambargo uyguladılar genede mücadele ediyorlar helal olsun
    1
  962. hello Elon Musk!
    1
  963. Did not show engine running, if it works I would be surprised , and if it lasts for 5000 + miles I would be impressed and bowled over…. Labour rates in this country are low but engineering skills are very high and safety standards do not exist. So it’s worth a try as a second hand or new head might be unaffordable.
    1
  964. Ty công hết rồi
    1
  965. Good luck
    1
  966. se vc reparar ninguem com oculos nem protetor auricular
    1
  967. هذه هي أفضل طريقة للعمل وإنجاز المهمة.
    1
  968. Que gente.en la fundición con chanclas y descalzos .parece que están en la planta.me gustaría saber que índice de siniestralidad tienen.seguro que si se acidentan que es lo más normal no les pasarán ni un euro.ala callé a mendigar
    1
  969. everything is cast investment 86 20 so it saves production and labor costs
    1
  970. why don't you upgrade your business to shopee or lazada or any other online shop. it is more profitable ..
    1
  971. In biologie they told me donkeys have 4 legs .... ( no safety nothing )
    1
  972. Половина соединений не проверено, 😮 В сраке глубокой.
    1
  973. Have the shears ever seen a drop of oil? Using verniers to remove swarf? Hahahahaha
    1
  974. It's junk
    1
  975. Rough as Hessian Underwear..
    1
  976. Watching from Brazil 🇧🇷
    1
  977. ao' , se le fanno e vendono vuol dire che funzionano ☺️ 👍 .
    1
  978. Maşallah
    1
  979. I am interested this setup in india pls technology and technical help for money
    1
  980. Great 👍👍👍
    1
  981. ery very few people can truly understand what dude did here well this stated questions belive it its Italy .. .. .
    1
  982. Thanks 🙏
    1
  983. Is it possible for Ukraine to send Russian tanks for repair?
    1
  984. Woher kommen die Machinen? DDR und BRD
    1
  985. Just look at that guy wearing protective goggle and steel toe boots... weirdo, I bet he gets joked at a lot.
    1
  986. That's a legit repair. 👍👍
    1
  987. So, they made a ring. OK. It does not fit on wheel - too small. OK. They cut the ring with intention to weld it back. OK. But why they weld gap in the ring BEFORE putting it on the wheel?
    1
  988. It's difficult to break a crankshaft. How are these guys doing it ?
    1
  989. Как в нашем фильме,тормози не тормозится у нас хвост отпал.
    1
  990. How long will it take to manufacture the excavator bucket?
    1
  991. Ye kidr bna rahy ?
    1
  992. ,smart, cool gentleman.
    1
  993. 👏🏻👏🏻👏🏻👏🏻
    1
  994. What's is the price of this machine
    1
  995. Wonderful job done by young guy love to you saeed Ahmed from lahore Pakistan
    1
  996. Зачем он на гриндере их точил?
    1
  997. I'm afraid that brick making gadget is gonna put an awful lot of children out of work. It's one of those "Disruptive Technologies"
    1
  998. 👍💪🏻💪🏻👌🏻👏👏👏👏👏
    1
  999. what safety
    1
  1000. 👍👍👍👏👏👏👌
    1
  1001. I want to know how they can sit like a bullfrog all day long. Even the fat ones sit like a bullfrog with their gut hanging between their legs all sprawled open, but they are still in the preferred position. They would make excellent baseball catchers, but I doubt any of them have been exposed to baseball.
    1
  1002. That was the need to slip and machine eyebrowed we're seeing maid. They are some good mechanics and welders in there.
    1
  1003. Wao! 😲😲 Very big truck resonator!
    1
  1004. What is material they used to make helmet
    1
  1005. Мда..
    1
  1006. Ues 👍👍👍👍💟💟💟
    1
  1007. Bahut badhiya kahan main aapka
    1
  1008. Siete,dei Gran Maestri !!!!!!!
    1
  1009. ماشااللہ بہت اچھے اللہ برکتیں عطاء فرمائے آمین
    1
  1010. Skilled worker fast, good I like it
    1
  1011. I assume it’s after market part. Then why even bother? Truck will move without the bumper.
    1
  1012. I wonder, how much time did it take to build it.
    1
  1013. +
    1
  1014. If given the task, these Pakistani uncles can perhaps fix a spaceX rocket engine without having any prior experience. Ha ha.
    1
  1015. Does anyone wear any shoes there? And I guess their eyes are expendable as well... SMH
    1
  1016. So it a "piece of ship"?
    1
  1017. Their voices being sped up makes it sound like I'm watching a Minions movie
    1
  1018. Very Impressive 👍, Part 2 please
    1
  1019. That is like .020" of play or more, easy.
    1
  1020. No safety glasses. Jesus. lol
    1
  1021. Looks like GTN door
    1
  1022. 👍👍👍👍👍👍👍👍👍
    1
  1023. Very difficult to understand their language, sounds almost chipmunk 🐿 impossible to translate 🤔. Great content, I really respect these guys and the way they go about things, just that language
    1
  1024. Sweeet
    1
  1025. No one is wearing any eye protection.
    1
  1026. Harley Davidson......
    1
  1027. Good work, but please working in this kind of environment with such heavy machines and irons required some safety wears. Take care of yourselves as you continue to work hard to make a living for your selves and families.
    1
  1028. I wish if I can import this machine to my country
    1
  1029. Nice
    1
  1030. Looks like my working condition at my home!
    1
  1031. 3rdmclass quality! waste of time, effort and resources!
    1
  1032. me neither!
    1
  1033. ποτε προλαβα και εκανα like , ουτε και εγω ο ιδιος θυμαμαι , πριν 5 ωρες λεει το βιντεο οτι αναρτηθηκε οποτε μαλλον δεν το εχω ξαναδει . μηπως το youtube παιρνει πρωτοβουλια ; like θα αφηνα , απλως με προβληματιζει η ανυποπτη στιγμη που δεν θυμαμαι οτι το εκανα .
    1
  1034. Thanks 🙏
    1
  1035.  @DiscoveringSkills  did you translate it ? i wrote it to my language because it was mostly thoughts about the like button pressed without remember doing it , i like your videos and i would easily leave a "like"
    1
  1036. Hasil pekerjaan yang bagus, rapi
    1
  1037. Good job watched from USA
    1
  1038. Good
    1
  1039. الله يساعدهم شغل متعب واداوت قديمه
    1
  1040. I think one more leaf on those Springs would probably make it look better
    1
  1041. Wow amazing 🥰
    1
  1042. I got so many questions how long did they take to do this repair and how much did it cost.
    1
  1043. How.long did the job take? Great work btw!
    1
  1044.  @DiscoveringSkills  Thank you!
    1
  1045. Buenas 45 años de Matricero,,, trabajando para multinacionales Automovilísticas,, normas de Calidadddddd,,, seguridaddddd,,, creo ke todo Perdidooooooossssss Firmas Automovilísticas,,,, kkkkkkkkkeeeeeeeeee Saludos para los matriceros del Vidio
    1
  1046. Это индусы или пакистанцы или кто ещё? 🤔
    1
  1047. 🤥🤒🤩👋👋
    1
  1048. $10 k job at least..
    1
  1049. 😍😍😍
    1
  1050. Maşallah
    1
  1051. 👏👏👍🏻👍🏻🇹🇷
    1
  1052. کمعمر کو نادککھا ئیں دنیامیں اپکیبعشتی ہوگیجناب!
    1
  1053. VERY GOOD WORK, best greatings from Germany, Town Munich City Moosach👍👍👍👍 Hey Workmans, you are the BEST !!
    1
  1054. حجي رحمه لولديك هوه بلادي ونگطع فكيف بلحيم
    1
  1055. Where 0.010” is close enough.. ;-)
    1
  1056. Crazy Shit!!!
    1
  1057. Will not work for very long
    1
  1058. This place will be closed if they don't make something different soon.
    1
  1059. Excelente trabalho.
    1
  1060. The long sleeves are very, very irritating!
    1
  1061. Top 👍👍👍👍👍👍👍
    1
  1062. Lol he started the cutting torch with the stick welder at 18:18
    1
  1063. Nice safety shoes, glasses, etc. I guess they don’t have OSHA..
    1
  1064. For what it’s wort, I just looked up the average wage in Pakistan, where this was made. The average MONTHLY wage here is 81,800 PKR (Pakistani Rupee). That equates to $287 USD per MONTH!!. That, gentleman is about $1.80 per hour. PER HOUR!!!! I was making that per hour back in 1971 when I was in the USAF and working part time at Target Snake Bar. OVER 50 YEARS AGO!! The average median salary in Pakistan is 70,400 PKR / Month. Which is less than the figure I stated above. Wow, wow and wow.
    1
  1065. mashallaha
    1
  1066. хоть бы краги купили бедолаге, все руки сжёг от такой работы.
    1
  1067. How much for a machine like that?
    1
  1068. Salut les amis expliquez moi un peu sur cette fabrication s'il vous plaît
    1
  1069. Сам только понял. Это для сцепления прицепа к грузовик. Для длиномеров
    1
  1070. Terima kasih perkongsian video nya 👍👍
    1
  1071. In my area there are a lot of fabricators of open low trailers, needing lots of welders. The Mennonite community provides many employees. Owners pay as little as possible, and do not provide much in the way of benefits, so workers THINK $13/HR WITH NO BENEFITS EXCEPT 1 WEEK VACATION IS A GREAT JOB. oops caps lock gone awry. I do not know if the low wages/poor benefits will continue, but I hope not, the workers are trying to raise families on one income, tough at $26k/year. But with Mennonites generally satisfied with 8th grade education, no college fund savings are needed for the kids, except for a few who get welding courses at the local junior college. In a way my area of north TX is third world country, with better shoes ;-}
    1
  1072. That is a good technique 👍!
    1
  1073. i farted really loud!
    1
  1074. And what do you think about the employees' shoes??!! In open flip-flops in a steel mill!!!! These guys seem to have got, among other things, steel balls hahahaha
    1
  1075. That's the crank shaft out of the new Civic SI.
    1
  1076. wow amazing
    1
  1077. First time in my life seeing measuring tape in lathe machine.
    1
  1078. hay masaallah.....
    1
  1079. So after that they heat treated it and hardened it right?
    1
  1080. Elmo Musk should sent one of these things to Mars... Than he can build his castle out of bricks....
    1
  1081. Кооператива работает.
    1
  1082. They did it at least 1000 times and it looks their lathe is still working perfectly and their customers are happy. We saw the mighty american army technology shatter against their primitive weapons in their lands before, so we just can't prove them wrong anymore!
    1
  1083. 👏👍
    1
  1084. Gracias 🙏🏿
    1
  1085. Qety
    1
  1086. Steel toe sandals ❤😂
    1
  1087. I like this video 👍👍👍 Indonesian audience 🙏🙏🙏
    1
  1088. Yikes! 😲
    1
  1089. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍🌹🌹🌹🌹🌹🌹🌹ابو امين من الاردن
    1
  1090. Is the gear supposed to wobble on the gear cutter like that?
    1
  1091. Amazing. Such a complicated machine to fabricate by hand.
    1
  1092. 🤝👍
    1
  1093. yes it is a fantastic job , they did it in a very simple but complicated way, how much did this machine cost with a special size of bricks
    1
  1094. Dear uploader, looking at the views you probably earn thousands of $ with your videos, if you're giving an amount to those you make videos of I have no idea, but it would be good to write down to factory's name and address in your caption. I'm sure between those millions of viewers there are some who are willing to donate safety gear, tools and/ or maybe money to help them. You can make the difference.
    1
  1095. wonder how long this lasts repairing cast iron usually doesnt last that long my dad was a professional welder, fitter, tool maker so I do know a little
    1
  1096. Кайра чийип алсада болобу
    1
  1097. Very very....gooodddddd.....hard work and dangerous for his life and his family....yourr the best mannn...
    1
  1098. Nice job!👌🏻 But isn't that fork heavier than whole escavator? 😅
    1
  1099. 🤨😶‍🌫😎💣👌🤝
    1
  1100. На моменте 1:33 видео они выравнивают ей взлётную полосу для самолётов.
    1
  1101. It levels the ground for whatever reason. If they want runoff for fields or a runway for a plane or foundation for a building
    1
  1102. It’s use for levelling the land
    1
  1103. Proud of you
    1
  1104. Son lo máximo, de donde son uds? Saludos desde Maracaibo Venezuela.
    1
  1105. Which seeds they use to extract oil? Is a comestible oil or for industrial use?
    1
  1106. Cool work thanks 👍
    1
  1107. Great 👍👍
    1
  1108. Pakistani workers with gloves...... Unbelievable.. ( well some of them at least)
    1
  1109. Why are they not adhering to call to prayer? Great skills.
    1
  1110. Where this factory is located? Can anyone know about this place. plz tell.
    1
  1111. God bless these men who can work somewhat safely without Health and Safety being all over them.☘️👍
    1
  1112. Is there some kind of rule that you have to breath helium before speaking to appear in these videos?
    1
  1113. বাংলাদেশ/ভাই/খুবভালো
    1
  1114. These would also fit straight into any frankenstein's neck... One question, is the lathe blade motorized during the cutting of threads, or is this guy just that good?
    1
  1115. Good
    1
  1116. You need PPE......
    1
  1117. Wow, My best friend, Wonderful video dear. I enjoyed watching. Hope to see you soon...
    1
  1118. интересно работа много труд хорошо.
    1
  1119. It’s no wonder when they have a truck accident, 800 people get killed
    1
  1120. We are trying to reach you to talk to you about your bucket loader's Warrenty when extended.
    1
  1121. did they finish welding it or do they just sell them tacked together?
    1
  1122. What about weight? Will it be same as original?
    1
  1123. Amazing work and results. Aluminium of course?
    1
  1124. I have now seen everything the internet has to offer.....wow.
    1
  1125. no gauge balance needed...
    1
  1126. Do they have any drawings and help us to make machine.? How can i contact them.. Please help
    1
  1127. Which state in Pakistan. Which area... Company name...
    1
  1128. i have watched about 50 videos from pakistan and india making things with lathes . this is the first one where they actually have some precision measuring tools. then they go and put oil on the gland and weld it with oil on it ??
    1
  1129. Best of luck
    1
  1130. Pitch. Diameter on tooth wheel is module x number of teeth, and bottom dia of wheel is (1,25 x module.) x2 - Pitch dia, And outer dia is Pitch dia + 2xmodule And you Come a Long way with a tape measure if you know what you are doing
    1
  1131. I wonder what the pay scale is??
    1
  1132. This shop could be located at Gujarat,India. I can hear Gujarati language which is my mother toungue.
    1
  1133. modern technology
    1
  1134. Very good 👍👍👍👍🇲🇦🇲🇦🇲🇦🇲🇦 from morroco
    1
  1135. Nice
    1
  1136. 👌👌👏👏👏👏 ассаламу алейкум ццц🙉
    1
  1137. If you slow it down to actual speed(between .50 and .75, .75 is still fast, but close), you see it's a pretty chill job.
    1
  1138. Waooo #dhawanrajawat Open and enjoy today and tomorrow
    1
  1139. bagus lah
    1
  1140. 16:00 what is that rolling machine for?
    1
  1141. Lộc chúc bạn vui vẻ mạnh khỏe trong công việc
    1
  1142. Una moneda en la puerta de un colegio va a durar mas que esa culata
    1
  1143. 👏👏👏👏👏😉🇧🇷
    1
  1144. Caterpillar is amazed by thus device as has no software and if failed farmer can fix it 😂
    1
  1145. Jos oke readi sukses
    1
  1146. ماشااللہ ۔ا یک پیس کتنے کا بنا کر دیتے ہو جی
    1
  1147. Wow
    1
  1148. It's not for nothing that they have nuclear...
    1
  1149. hacer de dos uno. soldado al medio de la bancada es la forma que aguanta
    1
  1150. Молодцы!
    1
  1151. A lot of work, Good Job!
    1
  1152. Good work
    1
  1153. Good gob
    1
  1154. He puts plastic sheets so that the sheet won’t be scratched, and then tosses the piece on the pile!
    1
  1155. Nice..
    1
  1156. ทุกอย่างทำดีหมด แต่โยนแรงไปนะบัง
    1
  1157. Union shop
    1
  1158. Perfect work
    1
  1159. How many cow pies does it take to repair and engine block?
    1
  1160. well they made that ten times more complicated than it needed to be
    1
  1161. Best part is it only cost the owner 2 chickens to fix this at this shop
    1
  1162. Asslam o alaikum Bhai hum ap sy ye purchase krna chtay hai apna contact number dy dy
    1
  1163. Sao không biết dùng súng hơi bắn ốc cho nhanh
    1
  1164. The most creative people are,people with can do personalty!!!
    1
  1165. first they throw the tanks around, then they knock the dents out with a hammer
    1
  1166. that was trippy and that one guys head is right at that biig wheel :O
    1
  1167. 👍👍👍👍
    1
  1168. ,
    1
  1169. Mera bike ka tank v kharab ho gya h mere bike ke liye tank milega...?super splendor 2007
    1
  1170. v How can you, just think, assemble mechanical parts with decimal or centesimal tolerances...dirty!!! The shaft that you turn at minute 38 appears crooked, non-linear, slightly bent; Does it have to be like this or is it a bug? Lubricants and/or grease....unfamiliar with each other?
    1
  1171. keep the kid away from the paint!!and the other people to
    1
  1172. Dubious safety precaution but respect for their skill. Well done gentlemen.👍
    1
  1173. i like the welding with no eye sheilding from the first guy. to their credit though the grinder guards look mostly on
    1
  1174. From the series "Only in Índia".
    1
  1175. THIS IS PAKISTAN
    1
  1176. Niewolnicza praca dla zys ku pasozyda Chyle czola dla tych biedakow
    1
  1177. it's really year 2022?
    1
  1178. I wonder what the cost of this there vs a repair like this in the States.
    1
  1179. How in expensive arrenge ments and settings...They must be earning "x" when it reaches the costomer it will be "10x"
    1
  1180. Фигня не красиво топорная работа.
    1
  1181. Всё шедеврально, качество минус.
    1
  1182. Хочу такой бампер на опель
    1
  1183. Best video quality
    1
  1184. Teem work 👍
    1
  1185. تین ماہ میں بس تین کمنٹس حیرت کی بات ہے
    1
  1186. Глазааа !
    1
  1187. I would like 2 see how they make the press dies. A separate video perhaps?
    1
  1188. One piece expire/then make 2 pieces continue by welding that impossible when get load an impact on wave road breake again /it death /get new one
    1
  1189. 🤝👍🙋‍♂️🇺🇿
    1
  1190. SEMELHANTE A CHINA.
    1
  1191. How did that head get so many cracks in it No coolant at all & this repair is a joke I bet it don't hold pressure
    1
  1192. India has a lot of man power thats an assets of a big country for highly industrialized modern world.
    1
  1193. How much does a job like this cost?
    1
  1194. For those of you that spent the whole 57 min+/- watching the horse, why are you here. If you're not interested in the craftsmanship shown by the builders, then, move on!
    1
  1195. i think it is Pakistan hard worker
    1
  1196. So this is a sleeper cab for long haul truckers, talented art work. Does it have heat and AC and what electrodes you guys use?
    1
  1197. Very good I like it
    1
  1198. Привет из России ! После шестерню за миллион долларов продадут, а клеймо поставят зделано США на высоко точном ,нано оборудование под контролем супер компьютера ! Вот и вся Америка. Вы супер люди,профессионалы так цените свой труд,и продовайте дорого ! Всем хорошим людям, здоровья удачи, благополучия !
    1
  1199. Cópia camión cabina de nissan ud 1993 a 2008
    1
  1200. قاچاق کالا به پاکستان انجام نمیشه و مردمش مشغول کار و تولید هستن ، چونکه نفت و پول ندارن ! اما ایران رو ورود غیر قانونی کالا و مافیای دولتی فلج کرده ، چون پول و نفت داریم ! اینا تولید میکنند و قاچاق میکنند به ایران و پول ما رو میبرن برای کارگرهای خودشون
    1
  1201. Nice work guys!!!!! Happy New Year
    1
  1202. Good Job guys!!!!
    1
  1203. Not bad, but missed a step of showing how they did the broaching for the keyway
    1
  1204. Yea no worries about all the rust .....just spray paint over the rust.....itll be fine
    1
  1205. I'm watching these videos from Pakistan and India and I am amazed that they did not discover work benches.I mean seriously what is with all that squatting.Chair and bench would be much more comfortable.
    1
  1206. Hmmm 😢 a my se sereme s nějakou ekologii tady mrdat na vsechno lidská důstojnost pracovní podmínky bezpečnost prace a nakládání s odpady =0 a efektivita prace taky nulová tim ale nehanim jejich šikovnost to naopak jsou to kluci šikovný 👌🏻
    1
  1207. Люди работают с минимальной стружкой. И вопрос там дождя вообще нет?
    1
  1208. Škoda komentovať.
    1
  1209. I am impressed.
    1
  1210. الله اكبر
    1
  1211. Hallo kann mir mal jemand sagen was die dem Sand zugeben was wird dort eingespritzt für eine Info wäre ich sehr dankbar MfG lacki 😊
    1
  1212. Welcome 💯
    1
  1213. The automobile parts owner are goung to be mad coz you can repaired all the expensive parts with less amount lol
    1
  1214. how to replace your pc power supply @
    1
  1215. The artwork is good
    1
  1216. A guy wearing Boots, and welding glasses!?
    1
  1217. Good Job keep it up Guys
    1
  1218. I applaud the skills and effort, but I can't see these helmets offering much protection...
    1
  1219. Altijd maar lassen met die kut elektroden, koop eens een MIG lasapparaat!
    1
  1220. Skilled workers. I wish them all the best please buy some work boots. They all have smart phones in their pockets so can surely afford some boots. I wish I could help and donate some.
    1
  1221. Hooks on the chains facing the wrong way
    1
  1222. Yep
    1
  1223. 🤣🤣🤣🤣🤣👍👍👍 это точно австралиец до этого не дотягивает.
    1
  1224. They got everybody's old machines FOR CHEAP..IM SURE
    1
  1225. Top skills
    1
  1226. .
    1
  1227. WHATTTT!!
    1
  1228. A bent bus, not getting fixed.
    1
  1229. nice work! :goodvibes:
    1
  1230. thats how they made all the hard disk drives - intricate patterns cut into thin platea and later all bonded into a block like a motor plus plus plus. Balancing not required here, never going to see even > 25 rpm
    1
  1231. I am a tool and die maker and have built many tools similar to what we see here. This operation is not bad at all. In america with the high cost of labor, We might be tasked with eliminating some of these operations, ( which We could). But this is not far from what we would see in the united states.
    1
  1232. Can't sharpened cutter like that
    1
  1233. India and its people are amazing
    1
  1234. the first guy with the torch would be able to cut those with a VERY simple jig as well as be precise and quicker.
    1
  1235. https://www.youtube.com/watch?v=zkZwrnPzhr0&t=149s&ab_channel=AcAuto Hello Dear! I hope that this video will be interesting for you
    1
  1236. Was this filmed in the 70's?
    1
  1237. 對缺一個個這樣油箱的我,想問怎麼賣?
    1
  1238. Where is the rest of the work???? 😠
    1
  1239. Is It in India or Pakistan ?
    1
  1240. 👍👍👍👍👍👏👏👏💪💪💪💪💡💡💡💡💡💡🤗🤗
    1
  1241. What is the purpose of putting the engine block components in a charcoal fire?
    1
  1242. Where this place
    1
  1243. Bangladesh cricket video Bhalo Lage breakup shayari notun video actor servant
    1
  1244. Whats the purpose of the 4 circular depressions and the 2 smaller ones ? Is it to strengthen the structure?
    1
  1245. EPI e segurança no trabalho"ZERO"
    1
  1246. Nic
    1
  1247. ¿Como? Primero los tiran con un descuido total en una pila y luego los desabollan uno por uno? No entiendo el criterio.
    1
  1248. 👍👌
    1
  1249. First
    1
  1250. ❤
    1
  1251. What about th tempering process ???
    1
  1252. them middle easterns dont be playin😳
    1
  1253. Useless wast of energy money time. Do useful work
    1
  1254. How to make a water pump head metal casting 👇 https://youtu.be/VnAtSBildsI
    1
  1255. Nice content 👍👍👍 Salam subcr dari amanah73🙏🙏🙏
    1
  1256. And then traders "Good fuel tank! Japan quality! Pamko-Sasai! Nippon Stainless steel!"
    1
  1257. How many leaf springs would you like? ALL OF THEM!
    1
  1258. If u do commentary It will be very helpful
    1
  1259. Hello
    1
  1260. Damn man, what the truck man carrying on
    1
  1261. Only one word: WOWWWWWWWWWWWWWWWWWW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Some big pieces of metal in that dump of a workshop.
    1
  1262. Good job 👍
    1
  1263. ❤❤❤
    1
  1264. В натуре,индейцы...
    1
  1265. ani ra diay
    1
  1266. 👍👍👍🇮🇩🇮🇩🇮🇩
    1
  1267. 장갑좀끼고 일해라. 녹슬은거벗겨내고~
    1
  1268. Good effort 👍
    1
  1269. I would have liked to see this rig working. Or was it built for a paint job?
    1
  1270. Is good idea
    1
  1271. Kkkk ou briga feia para tirar um eixo
    1
  1272. Taqreeban sara truck k parts / body to Pakistani bhai banalete hain. To phir full local complete manufacturer kiyoun nahi karte. Very sad.
    1
  1273. You guy's do some great work, very good..
    1
  1274. I just want to send some steel toe boots and safety glasses.
    1
  1275. That is the real recycling !! Here they build now cars with akkus that you can throw away after one small crash or 5 years usage ….. And they call it „saving the climate“
    1
  1276. 👍👍
    1
  1277. I doubt this holding a seal for more than a few hours of use, if that. Not to mention putting strain on all the other parts connected to it. It will never be as strait as it was and since its been bent and heated it wont be as strong either. And i have to wonder what they were doing for it to bend like that anyways? Possibly been “repaired” before? Id seriously question anything that was constructed by these guys.
    1
  1278. Bravo Maestro 👍🏻
    1
  1279. Это вообще то не шестерня,у шестерни зубья эвольвентные,по простому с радиусным зубом,а это так подобие шестерни.
    1
  1280. When was the key slot done
    1
  1281. 🙏🙏🙏
    1
  1282. please show us how it works
    1
  1283. No safety glasses? gloves? anything?
    1
  1284. Orang orang-orang berkemampuan hebat!!
    1
  1285. 👌👍
    1
  1286. Bel lavoro, ma resto perplesso sulla centratura e bilanciatura dell'albero motore, comunque complimenti.
    1
  1287. Hallo this is Jim thank you for calling Amazon support .
    1
  1288. Much respect for these hard working fellas but safety and personnel protection does not appear evident . I wish them luck and good health from down under in Australia
    1
  1289.  @DiscoveringSkills  very cool.👍🏼
    1
  1290. Молодцы
    1
  1291. Amazing 👍👍👍 Indonesian audience 🙏🙏🙏
    1
  1292. Good shooting good editing clean &detailed video keep it up
    1
  1293. Now i know why OHaS was created lolol
    1
  1294. ❤
    1
  1295. Third world tech!
    1
  1296. AWESOME 👍👍
    1
  1297. No safety shoes required at this work places.?🤔🤔🤔😂😂NO safety glasses,NO safety gloves 🧤.???
    1
  1298. 👍👍👍
    1
  1299. The man who welds should visit a doctor, he has a cyst near his ear on his right face...visible at 10:47...
    1
  1300. Yeh factory kahan hai
    1
  1301. Am I the only person who thinks that they are listening to the minions when they speed up the video?????
    1
  1302. Super 🔥🔥🔥
    1
  1303. EXCELLENT!! tHESE PEOPLE ARE VERY INGENIOUS AND HARD WORKING!!!
    1
  1304. Made in Italia?
    1
  1305. What motorcycle are those tanks for?
    1
  1306. these guys are insane. when USA economy collapses and it becomes economically viable to repair hydraulic cylinders instead of throwing broken cylinders in the trash, Americans will have to travel to Pakistan to learn how to fix them!
    1
  1307. Eu não gosto de ouvir os meus colegas de trabalho reclamarem das condições de trabalho. Eu acho que eles não sabem o quão sortudos são por terem um emprego decente em Portugal. Eu sempre mostro a eles vídeos de pessoas que trabalham em situações muito piores, como em minas, fábricas ou plantações. Eles ficam quietos e agradecidos depois de verem essas imagens. Essas pessoas sim vivem na idade da pedra.
    1
  1308. I don't like the way he just throws his pressings around. Sure, it may not damage them (it also MAY scratch and dent them minutely). It actually shows disrespect for his workmanship and his employer's products. It is also FUCKING UNNECESSARY. He could just take one more step closer AND PUT IT DOWN nicely, like they would at say BMW or even Toyota.He no doubt thinks it's a sign of masculinity. No woman process worker would throw stuff around like that. Think about it.
    1
  1309. Tutto molto bello, le scarpe antinfortunistiche la cosa che preferisco
    1
  1310. Amazing...I'd like to send this man a pair of safety glasses.
    1
  1311. How many people in pakistan or india are missing toes or parts of fingers from lack of any safety standards?
    1
  1312. 👍👍👍👍👍👍👍👀👀👀👀👀👀💯
    1
  1313. 👌👌👌
    1
  1314. Very nice
    1
  1315. I am denter this roof old super hino
    1
  1316. cái hay của phúc đó giọng hất rất tình cảm , mỗi bài hát là bạn ấy thả hết tâm hồn và tình cảm vậy , và thể hết giống như mình đã từng trải nghiệm , i love you
    1
  1317. Why show all the work and not the end results? SMH
    1
  1318. Amazing. Using Henry Ford equipment. 🇺🇸
    1
  1319. Это что за хуета ,и для чего ?
    1
  1320. what cuntries is this❤
    1
  1321. Where's the ending? Is there another part of this video coming?
    1
  1322. +
    1
  1323. Повтор видео. 😮
    1
  1324. Incredible I couldn't stop watching.
    1
  1325. Veri nice
    1
  1326. Are you loading too much luggage?🥶 Is the suspension working?😨
    1
  1327. Nice work well don
    1
  1328. 0:40 if you know what i mean💀🤣
    1
  1329. All that work and they lay it down on the dirty floor.
    1
  1330. Nice fabrication. Some others parts could be made in advance and just put together saving time
    1
  1331. Во всем мире ,кто хочет ,работает и что-то производит.Пусть в таких условиях ,но производит.В России все вымерло, делают вид ,что есть автопром ,которого на самом деле нет уже давно.
    1
  1332. Mein grösster Wunsch ist immer, dass diese Männer für ihre korrekte Arbeit auch gut bezahlt werden.
    1
  1333. 1:00 cutting sheets amazing
    1
  1334. Should be modified to attach to a tractor instead. Like this in Thailand 30 years ago, now there are few, because it uses expensive labor.
    1