Comments by "" (@ProjectFarm) on "Which Metal Grinding Wheel is Best? Let's find out! Diablo, DeWalt, Makita, Avanti, Norton, Warrior" video.

  1. Thank you very much for the positive comment! I have a lot of fun with the testing. I love watching these brands compete against each other!
    73
  2. Thank you very much! I do the best I can. If I mess up, a lot of people will make a poor buying decision....not good. So, I really try hard to get it right and consult others for advice when needed. Thanks again.
    65
  3. Thank you all very much for the terrific video suggestions, including this one! If you'd like more brands tested, please let me know. Links below to the brands tested but always recommend shopping around for better prices. Thanks again and best regards, Todd Makita: https://amzn.to/3j6ydLm DeWalt: https://amzn.to/32ggJVR Norton: https://amzn.to/2EukDCd Warrior: https://bit.ly/329Gh6Y Avanti: https://www.homedepot.com/p/Avanti-Pro-4-1-2-in-x-1-4-in-x-7-8-in-Metal-Grinding-Disc-with-Type-27-Depressed-Center-PBD045250701F/202831011 Diablo: https://www.homedepot.com/p/DIABLO-4-in-x-1-4-in-x-5-8-in-Metal-Grinding-Disc-with-Type-27-Depressed-Center-DBD040250701F/207202904?MERCH=REC-pipsem-202831011--207202904--N
    44
  4. I'll do it! This will be a fun test!
    43
  5. Great test idea!
    42
  6. I'll do it very soon. Thank you!
    34
  7. You are right! I'll do that in the future. Thanks for the recommendation!
    33
  8. Thank you very much! It's all about finding the best products.
    26
  9. Not yet. Great test idea!
    22
  10. Great point. Thank you
    16
  11. Great point! Thank you
    15
  12. Thank you very much!
    11
  13. lol. It's a great drill!
    10
  14. I sort of have an engineering background but not a degree in it. Thank you!
    10
  15. Happy Birthday!!!!
    10
  16. Thank you very much!
    9
  17. Thank you very much for the positive comments! Great point on the pounds. I tried to use ounces but I need a more precise scale. I'll have to buy in soon. Thank you very much for supporting the channel too! I'll test drill bits in a few weeks. I'm still working on test design that'll allow the bits to be tested with minimal human involvement to make sure I don't mess up the results. Thanks again.
    6
  18. Thank you!
    6
  19. Thank you for doing the math!
    6
  20. Thank you!
    6
  21. Thank you very much! Great test idea! I'll do it!
    5
  22. Thank you for crunching the numbers!
    5
  23. lol. Yes, I took extra measures to keep the shop from getting too foggy. Box fan and filters. I wore a high quality respirator to avoid breathing in the dust.
    5
  24. Thank you very much! If you're a vet, Happy Veterans day to you as well.
    5
  25. Great test idea! Thank you
    5
  26. Great point! Thank you
    4
  27. Thank you very much! I really enjoy your videos! You're doing an amazing job!
    4
  28. Thank you!
    3
  29. Great point.I'll test the flap disks soon.
    3
  30. Thank you very much. Yes, all the steel came from the same piece of metal. I cut it into several pieces for testing. It's mild steel. Great point on the wear of the wheel and cutting speed.
    3
  31. Good to know! Thank you
    3
  32. Thank you!
    3
  33. You are right. Thank you
    3
  34. Hi Lewie, Thank you very much for the positive comments! I've had cutoff wheel break apart and that can cause injury. Thanks again and wishing you many Blessings! Snowing and very cold here in Missiouri. Gave the cows and calves a little extra hay in the shelters for bedding to stay warm with winter lows dipping into the mid-teens tonight.
    3
  35. Thank you! I'll test the cutoff wheels soon. Great video idea!
    3
  36. Great test idea! Thank you
    3
  37. Thank for watching.
    3
  38. Thanks!
    3
  39. Yes it is. I'm impressed that you recognize it!
    3
  40. Thank you for the video idea!
    2
  41. Great test idea! I'll do it.
    2
  42. Thank you for the video idea!
    2
  43. lol. Thank you
    2
  44. Great point.
    2
  45. Thanks for the feedback.
    2
  46. Thank you
    2
  47. Wow! That's scary!
    2
  48. Thank you
    2
  49. Thanks for watching.
    2
  50. Those are great wheels!
    2
  51. Thank you!
    2
  52. Great recommendation. I'll include that in the cutoff wheel showdown.
    2
  53. Thank you!
    2
  54. Thank you very much! Great test idea!
    2
  55. Thanks and you are welcome! Thanks for the suggestion.
    2
  56. Thank you!
    2
  57. Thank you!
    2
  58. Great question. That was the only piece of steel that I had left to use in the test and I had already used it for anther project.
    2
  59. Thank you!
    2
  60. lol. No worries, no lawn mowers or people were damaged during the taping of this video.
    2
  61. lol
    2
  62. Thank you very much! I continue to really like the titanium trimmer line as well. I can tell the difference as it's definitely better than the competition.
    2
  63. Thanks for the constructive feedback.
    2
  64. Thank you!
    2
  65. Thanks for the feedback.
    2
  66. Thank you for the video idea!
    2
  67. Great test idea!
    2
  68. I'll do it. Thank you
    2
  69. Thank you!
    2
  70. Thank you!
    2
  71. Thank you!
    2
  72. Thank you!
    2
  73. Great point. Thank you
    2
  74. Thank you! I'll test the cutoff wheels soon.
    2
  75. Great test idea! Thank you
    2
  76. Thank you very much!
    2
  77. Yes, they all were the same grit. I thought it'd cut faster too, but it'll last a long time. Cutting wheel and flap disc testing coming soon. Thanks again!
    2
  78. I'll do it! Great recommendation.
    2
  79. Thank you for the constructive feedback!
    2
  80. Thanks for the video idea.
    2
  81. Thanks for the suggestion.
    2
  82. I'll do it. Thank you!
    2
  83. Great point. Thank you
    2
  84. Thank you!
    2
  85. Great video idea!
    2
  86. Thank you
    2
  87. Thank you for the video idea!
    2
  88. Great test idea! Thank you
    2
  89. Great point. Thank you
    2
  90. Thanks for the feedback.
    2
  91. Great test idea!
    2
  92. Thank you for the video idea!
    2
  93. Great test idea!
    2
  94. I need to test it soon.
    2
  95. This is great information. Thank you!
    2
  96. Thanks for the constructive feedback
    2
  97. Great recommendation on the welding test. Thank you
    2
  98. Thank you for the video idea!
    2
  99. Thank you
    2
  100. Thank you
    2
  101. Great video idea!
    2
  102. Thank you!
    2
  103. Thanks for the test idea!
    2
  104. David, I don't know why you didn't get the notification. Views are way down on this video and others didn't get notified either. Thanks for the positive comment and hope all is well. Regards, Todd
    2
  105. Thank you!
    2
  106. Great test idea! Thank you!
    2
  107. Thanks for the feedback.
    2
  108. Wow! Thank you
    2
  109. I need to build one soon. Thank you
    2
  110. Thank you!
    2
  111. Thank you! Yes, the grinder had to cool for several minutes with the help of a fan between tests.
    2
  112. Thank you!
    2
  113. Thanks for the test idea. I tested it in this video: https://www.youtube.com/watch?v=QLW5KEslF3A
    2
  114. Great test idea! Thank you and wishing you Blessings too!
    2
  115. Good Point!
    2
  116. lol. Funny!
    2
  117. Thank you very much!
    2
  118. Thank you!
    2
  119. Thank you very much!
    2
  120. lol. Yes it did. I'll test the cutoff disks soon. Thank you!
    2
  121. Thank you!
    2
  122. Thanks for the suggestion.
    2
  123. Great point. Thank you. I'll test the cutoff wheels soon.
    2
  124. Thanks for the video idea.
    2
  125. Great test idea!
    2
  126. Thank you!
    2
  127. Thank you!
    2
  128. Great point. Thank you
    2
  129. Not yet. I need to have some made. Thank you!
    2
  130. Thank you!
    2
  131. Thank you for the video idea!
    2
  132. I need to test those. Great test idea!
    2
  133. Yes, that test is coming soon. Thank you
    2
  134. Thank you! Great test ideas!
    2
  135. Thank you! Yes, the warrior did fine in this test. There were several comments cautioning me not to use the last little bit of the warrior grinding wheels as they had them break apart while in use.
    2
  136. Thanks again. Hope you enjoyed the video.
    2
  137. Thanks for the test idea!
    2
  138. Thank you very much!
    2
  139. I'll do it. Thank you!
    2
  140. Thanks for the recommendation.
    2
  141. Thanks for the video idea!
    2
  142. Great point. I only measured the wheel and not the label. Thanks again
    2
  143. I enjoy metal work too. Glad the Hercules grinder is delivering great service!
    2
  144. Great recommendation. I'll do it.
    2
  145. Thank you!
    2
  146. Great test idea!
    2
  147. Thank you!
    2
  148. Thank you. I didn't reference ASTM but that would have been a great starting point. I setup the test jig angle based upon the recommended grinding angle on a couple of products which recommended 30 degrees. The angle I used wasn't precisely 30 degrees but was close.
    2
  149. Fortunately, all of the wheels I tested were properly balanced. I've had some bad wheels over the years.
    2
  150. Thank you!
    2
  151. Thank you!
    2
  152. Thank you very much for the positive comment!
    2
  153. Thank you. Many more HF products to test. We'll see if the streak continues.
    2
  154. Great constructive feedback. Thank you
    2
  155. Thank you! I'll test flap discs very soon.
    2
  156. Thank you!
    2
  157. Great point. Thank you
    2
  158. Yes, I'd be willing to buy them at $1.
    2
  159. Thank you.
    2
  160. Very soon. It's a 4-video series. I'm thinking all 4 videos should be ready by Thanksgiving weekend.
    2
  161. Thank you!
    2
  162. Thank you!
    2
  163. Thank you
    2
  164. Thank you. I spent a few hours building the jig and running several tests to ensure repeatable and reliable results. I'm confident in the results.
    2
  165. Thanks for the suggestion.
    2
  166. Thank you!
    2
  167. Great test idea!
    2
  168. Thank you for the video idea!
    2
  169. Thank you
    2
  170. Thank you!
    2
  171. Great test idea! Thank you
    2
  172. Thank You
    2
  173. Thank you very much! Yes, I'll test drill bits soon.
    2
  174. Great test idea! Thank you
    2
  175. Great point! I should have tested the walter brand. I'll test their flap disc soon. Thank you
    2
  176. Great point. Thank you
    2
  177. Great test idea! Thank you
    2
  178. Great point. Thank you for the constructive feedback.
    2
  179. Great point! Thank you
    2
  180. Great test idea. Thank you
    2
  181. Great point! Several of these brands have their products made in China. Low production costs and other regulatory factors.
    2
  182. Great point. Thank you
    2
  183. Thank you! Ups and downs happen to all of us. I really enjoy work in the shop.
    2
  184. Thank you for the recomendaiton
    2
  185. Thank you!
    2
  186. I'll include walter on the flap disc testing. Great recommendation!
    2
  187. Sorry about that. Thanks for the constructive feedback.
    2
  188. No yet. I've already bought the supplies and will publish a video soon. Thank you!
    2
  189. Sorry I missed that one! Thanks for the recommendation.
    2
  190. I agree. Thank you
    2
  191. Thanks and you are welcome!
    2
  192. Thank you very much for the generous offer! I might reach out to you in the future for help. Great point on friability too!
    2
  193. Great test idea!
    2
  194. Thank you!
    2
  195. Thanks for the video idea.
    2
  196. Thank you!
    2
  197. Thanks for the suggestion.
    2
  198. Thanks so much!
    2
  199. Thank you
    2
  200. Thank you
    2
  201. Great video idea! Thank you
    2
  202. Great test idea!
    2
  203. Thank you for the video idea!
    2
  204. Great video idea! Thank you
    2
  205. Great video idea!
    2
  206. Thank you very much! Great choice in products you use too!
    2
  207. Thank you very much!
    2
  208. Thanks for sharing!
    2
  209. Thanks for the test idea.
    2
  210. Thank you!
    2
  211. Great test idea! I'll test this soon.
    2
  212. Great point.
    2
  213. Thank you very much!
    2
  214. Thank you!
    2
  215. Thank you very much!
    2
  216. Thanks for sharing.
    2
  217. lol. Yes, I have a lot more high energy comparison testing forthcoming. Thanks again
    2
  218. Great test idea! Thank you
    2
  219. Thank you for the recommendations.
    2
  220. Thanks for the recommendation.
    2
  221. This is a great video idea! Thank you
    2
  222. Great test idea!
    2
  223. Thank you.
    2
  224. Great test idea! Thank you
    2
  225. Great recommendations. Thank you!
    2
  226. Thank you
    2
  227. Great point on the lawnmower blade sharpening. Thank you very much for the positive comments too!
    2
  228. Sorry about that. I didn't calculate the cost for that.
    2
  229. Great point. Thank you
    2
  230. Great point regarding the fact that some wheels glaze over and cut poorly.
    2
  231. Great point. I should have included it.
    2
  232. Thank you!
    2
  233. Thank you
    2
  234. I'll do it. Thank you
    2
  235. Thank you for the video idea!
    2
  236. I'm working on the flap disc video now. Thank you.
    2
  237. Thank you very much for supporting! I'll be spending hundreds on cutting wheels, flap discs, sawzall blades of all types and more. It helps!
    2
  238. Great test idea!
    2
  239. Thanks so much!
    2
  240. Thanks for the feedback.
    2
  241. Thank you very much! God bless!
    2
  242. Thank you
    2
  243. Yes, great recommendation. I'll do it.
    2
  244. I'll have to buy them from future testing.
    2
  245. Great test idea!
    2
  246. Thank you!
    2
  247. Thank you very much and great test recommendations!
    2
  248. Great value
    2
  249. Great suggestion! Thank you.
    2
  250. Great test idea! Yes, there is a way to test this.
    2
  251. Thanks for the nice comment.
    2
  252. Great point. Thank you
    2
  253. Funny!
    2
  254. Thank you very much!
    2
  255. Great point. Thank you
    2
  256. Thank you!
    2
  257. Thank you!
    2
  258. Thank you for the video idea!
    2
  259. Great test idea! Thank you
    2
  260. Yes, I tried it a while back and the engine ran.
    2
  261. I need to check that. I bought all of these within just before the test from large retail outlets and Amazon. So, I didn't even look into this.
    2
  262. Thank you!
    2
  263. Great video ideas! Thank you
    2
  264. Wow! Sorry that happened to you. Cutting wheels are unforgiving. I've had some close calls with them.
    2
  265. Thank you for the feedback
    2
  266. Great pont. Thank you
    2
  267. I wish I would have tested Bosch. Thank you
    2
  268. Thanks for the video idea.
    2
  269. Thank you very much! Great video idea too. Thanks again.
    2
  270. Thank you very much!
    2
  271. Great point. Thank you
    2
  272. Thank you
    2
  273. Thank you
    2
  274. Thank you! I do spend a lot of time thinking of ways to test products in a way that is fair and will yield repeatable results. Testing such a broad range of products is definitely challenging! Lots of very intelligent viewers with tremendous expertise in using and testing products view the videos. I learn from the constructive feedback. Thanks again.
    2
  275. Thank you!
    2
  276. Great video idea! Thank you
    2
  277. Thank you!
    2
  278. Thank you for the video idea!
    2
  279. Thank you!
    2
  280. Thank you
    2
  281. Thank you!
    2
  282. I'll do it! Great test idea!
    2
  283. Great test idea! Thank you
    2
  284. Thank you!
    2
  285. Great point. I need to test more of their products by quality level.
    2
  286. Thank you!
    2
  287. Great test idea!
    2
  288. Thank you!
    2
  289. Great video idea!
    2
  290. Thank you for the video idea!
    2
  291. Thank you and Happy New Year!
    2
  292. Thanks for the constructive feedback.
    2
  293. Thank you
    2
  294. Thank you!
    2
  295. Great recommendation!
    2
  296. Great point and thank you.
    2
  297. Great point. I will do the math for a future video on metal cutoff wheels.
    2
  298. Thanks for the recommendation.
    1
  299. Thank you for the recommendation!
    1
  300. Thank you!
    1
  301. Glad I could help!
    1
  302. Thanks for the video idea.
    1
  303. Great point. Thank you
    1
  304. Thanks for the video idea.
    1
  305. Thank you
    1
  306. Thank you
    1
  307. Great video idea!
    1
  308. Thank you!
    1
  309. Thanks for the recommendation.
    1
  310. Thank you!
    1
  311. Thanks for the recommendation.
    1
  312. Thank you. Some of the wheels I purchased indicated a specific grind angle, which I attempted to use during the testing.
    1
  313. Thank you!
    1
  314. Thank you!
    1
  315. Thank you
    1
  316. Thanks for the feedback.
    1
  317. Thanks for the feedback.
    1
  318. Sorry about that. Yes, all 40 grit but the HF was 36 I believe. Thank you!
    1
  319. Thank you!
    1
  320. Thank you
    1
  321. Thanks! Thanks for the suggestion.
    1
  322. Great point!
    1
  323. Great point. Thank you
    1
  324. Great video idea. Thanks
    1
  325. Great recommendation. Thank you
    1
  326. Great test idea!
    1
  327. Thanks for the video idea.
    1
  328. Thanks! Thanks for the feedback.
    1
  329. Thank you very much! I'll test the flap disks soon.
    1
  330. Thank you!
    1
  331. Thanks for the positive comment.
    1
  332. Thank you!
    1
  333. Thank you
    1
  334. Thank you!
    1
  335. Great test idea!
    1
  336. Thank you!
    1
  337. Thank you! Yes, it is a space pen. I think the pen is worth the money, but I'm not too picky on ink quality.
    1
  338. Glad to hear!
    1
  339. Great point. Thank you
    1
  340. Thank you
    1
  341. Hope you enjoyed the video!
    1
  342. Thank you
    1
  343. Thanks for the feedback.
    1
  344. Thank you very much!
    1
  345. Thank you for the feedback
    1
  346. Thank you!
    1
  347. Thank you!
    1
  348. Thanks for the suggestion.
    1
  349. Thank you very much!
    1
  350. Thanks for the recommendation.
    1
  351. Thanks for the video idea.
    1
  352. Thank you very much for the positive comments and constructive feedback!
    1
  353. Thank you very much!
    1
  354. Thank you!
    1
  355. Thanks for the video idea.
    1
  356. Great test idea! Thank you
    1
  357. Great recommendation!
    1
  358. Thanks for the feedback.
    1
  359. Great video idea!
    1
  360. Thank you!
    1
  361. Thank you!
    1
  362. Thank you!
    1
  363. Thanks for sharing.
    1
  364. Thank you!
    1
  365. Thank you!
    1
  366. Thank you!
    1
  367. Great test idea!
    1
  368. I'll do both really soon. Great recommendation!
    1
  369. Thank you!
    1
  370. Lots of excellent points. Thank you
    1
  371. Great test idea! Thank you
    1
  372. Thank you!
    1
  373. Thanks for watching!
    1
  374. Thank you!
    1
  375. Thank you!
    1
  376. Thank you for the video idea!
    1
  377. Great test idea! I'll do it.
    1
  378. Yes, I believe that one was the most surprising one. Thanks again!
    1
  379. Thank you
    1
  380. Thank you!
    1
  381. Great test idea. Thank you
    1
  382. Thank you!
    1
  383. Great point. Thank you
    1
  384. Great recommendation!
    1
  385. Thank you!
    1
  386. Great point.
    1
  387. Great point. Thank you!
    1
  388. Thank you!
    1
  389. Thank you very much!
    1
  390. I'll do both of them. Thank you
    1
  391. Thank you!
    1
  392. Thank you. Great test idea!
    1
  393. Thank you!
    1
  394. Thanks for the suggestion.
    1
  395. Thank you
    1
  396. Thank you very much for the comments! You've made some excellent points. I'll definitely test flapwheels and cutting wheels soon. Thanks again!
    1
  397. Thank you and hope you have a Blessed day too.
    1
  398. Thanks for the suggestion.
    1
  399. Great point! Thank you
    1
  400. Thank you!
    1
  401. Thank you very much!
    1
  402. Thank you!
    1
  403. lol. Thank you
    1
  404. Great test idea! Thank you
    1
  405. Thank you very much!
    1
  406. Thank you!
    1
  407. Great point.
    1
  408. Thank you!
    1
  409. Great suggestion! Thank you.
    1
  410. Great test idea!
    1
  411. Great test idea! Thank you
    1
  412. Thank you!
    1
  413. Thank you. I'll test flap discs soon.
    1
  414. Great recommendations. Thank you!
    1
  415. Thanks for the video idea.
    1
  416. Great test idea!
    1
  417. Great test idea! I'll test them soon.
    1
  418. Great point. Thank you
    1
  419. Great test idea! Thank you
    1
  420. Thank you! I should have done the analysis. Part of the challenge is that I would need to determine what's considered the usable portion of the wheel, grind them all down to the same size, then subtract that weight. Great point. Thank you
    1
  421. Great point. I'll try to improve the graphs. Thanks again.
    1
  422. Thank you. I'm former military and started YT will full time military for the 1st year. I now have a farm, which is essentially a full-time job. YT is for fun. Thanks again.
    1
  423. Thank you. I tested them recently.
    1
  424. Great point. Thank you
    1
  425. I'll definitely test cutting wheels soon. Thank you!
    1
  426. Thanks for the suggestion.
    1
  427. Great point. Thank you.
    1
  428. Thank you for the video idea!
    1
  429. Thanks for the feedback.
    1
  430. Great point. Thank you
    1
  431. Great point. Thank you
    1
  432. Great test idea! Thank you
    1
  433. Great test idea and greetings! You're just north of me here in Kansas City, Mo area.
    1
  434. Great question. I should have tested that.
    1
  435. Thanks for the positive comment.
    1
  436. Great video idea!
    1
  437. Great point! They last a long time!
    1
  438. Great test idea! I'll test them soon.
    1
  439. Great point. Thank you
    1
  440. Thank you
    1
  441. Great video idea. Thank you
    1
  442. Thanks for the video idea.
    1
  443. Thanks for the recommendation.
    1
  444. Thanks for the recommendation.
    1
  445. Thank you!
    1
  446. Thank you for the video idea!
    1
  447. Great recommendation. Thankyou!
    1
  448. Great test idea!
    1
  449. Thanks for the recommendation.
    1
  450. Thank you
    1
  451. Thanks for the suggestion.
    1
  452. Thank you for the video idea!
    1
  453. lol. Thanks
    1
  454. You are very welcome!
    1
  455. Thank you for the video idea!
    1
  456. Great point. That's been a great drill for over a decade.
    1
  457. Thanks for the video idea.
    1
  458. Thank you!
    1
  459. Thanks, will do!
    1
  460. Thank you
    1
  461. Thank you
    1
  462. Thanks for sharing.
    1
  463. Thank you
    1
  464. Great point. I should have done that. Thank you
    1
  465. This is great information. Thank you
    1
  466. Great suggestion! Thank you.
    1
  467. Thank you very much! I don't plan to ever accept sponsorships
    1
  468. Thank you!
    1
  469. Great recommendation. Thank you!
    1
  470. Thank you!
    1
  471. lol. Thank you! If the energy levels are too high, let me know and I'll reduce the coffee intake. lol
    1
  472. I'll test them soon. Thank you!
    1
  473. Thanks for the feedback.
    1
  474. Thanks for the video idea!
    1
  475. Thank you
    1
  476. Thanks for the feedback.
    1
  477. Thank you!
    1
  478. Thanks for the video idea.
    1
  479. Thank you
    1
  480. Great point. Thank you
    1
  481. Thanks for the feedback.
    1
  482. Great video idea!
    1
  483. Great point. Thank you
    1
  484. Thank you!
    1
  485. Thank you!
    1
  486. Thank you!
    1
  487. You are welcome! Thanks for the suggestion.
    1
  488. You're welcome!
    1
  489. Thank you very much!!
    1
  490. Great test idea! I'll do it soon.
    1
  491. Thanks for the video idea!
    1
  492. Thank you!
    1
  493. Thank you very much! I enjoy the comments!
    1
  494. Great test idea!
    1
  495. Great point. Thank you.
    1
  496. Thank you!
    1
  497. Sorry I didn't include those.
    1
  498. Thanks for the feedback.
    1
  499. Thanks for sharing!
    1
  500. Thank you
    1
  501. Great video idea!
    1
  502. Thank you! Yes, I had a lot of fun with this video. I enjoy these competitions. Things will really heat up for the cutoff wheels and zawzall blade testing.
    1
  503. Thank you.
    1
  504. Thank you very much!
    1
  505. lol. What type of wheels do you use? Could you create a new comment so I can find your reply?
    1
  506. Thank you very much! Great test recommendation. I'll test both of those.
    1
  507. Great test idea!
    1
  508. Great recommendation. Thank you
    1
  509. Great test idea!
    1
  510. Great video idea! Thank you
    1
  511. Great recommendation! Thank you
    1
  512. Thank you!
    1
  513. Thank you!
    1
  514. Thank you!
    1
  515. Thank you! Great test idea too!
    1
  516. Thank you!
    1
  517. lol. Thank you
    1
  518. Great information regarding variable speed and great test idea regarding safety. Thank you!
    1
  519. Thank you very much!
    1
  520. Great point. Thank you
    1
  521. Thanks for the feedback.
    1
  522. Thank you!
    1
  523. Great test idea!
    1
  524. Wow! I wonder what ingredient caused the reaction.
    1
  525. Thank you very much!
    1
  526. Thank you. I should have been a mechanical engineer. I really enjoy this sort of thing.
    1
  527. Thank you!
    1
  528. Thank you very much!
    1
  529. Great test idea
    1
  530. Great test idea! God Bless and Happy Veterans Day to you as well. Thanks again!
    1
  531. Great test idea! Thank you
    1
  532. Great point. Thank you
    1
  533. Colonel Sanders, Thank you!
    1
  534. That's a great wheel!
    1
  535. Thank you!
    1
  536. Thank you
    1
  537. You are welcome!
    1
  538. Thanks for the feedback.
    1
  539. Thank you
    1
  540. Great point. I'll test their flap discs soon.
    1
  541. lol. Thank you very much and wishing you a Happy Veterans day too.
    1
  542. I'll test the Walter flap wheels soon. Thank you
    1
  543. Thank you!
    1
  544. Thank you! I'll have to test their metal cutting disks. Thanks again!
    1
  545. Great test idea! Thank you
    1
  546. Great point. I tested a couple of them and they seemed the same. With that said, there may be multiple suppliers for their brand. I don't know.
    1
  547. They all look very close.
    1
  548. Jonas, Great test idea! Thank you
    1
  549. Thank you!
    1
  550. I wish I would have tested it. Thank you
    1
  551. Thank you
    1
  552. Thanks for the suggestion.
    1
  553. Great point. Thank you
    1
  554. Thank you!
    1
  555. Thank you!
    1
  556. Thank you for the video idea!
    1
  557. No. Thanks for watching.
    1
  558. It's a great wheel!
    1
  559. Great test idea! I get a lot of great tips on how to test products from viewers and friends. Thanks again.
    1
  560. Thank you!
    1
  561. Thank you very much!
    1
  562. You're welcome!
    1
  563. lol. Thank you
    1
  564. Thanks for the video idea.
    1
  565. Thank you for the video idea!
    1
  566. Thank you!
    1
  567. Thank you!
    1
  568. Great point on holding shape. Norton makes a great wheel.
    1
  569. Wow! Great point on safety.
    1
  570. Thanks for watching!
    1
  571. Thank you
    1
  572. Thank you for the video idea!
    1
  573. Thank you
    1
  574. Great test idea!
    1
  575. Thank you very much for the positive comment!
    1
  576. Thanks for the video idea.
    1
  577. Thank you
    1
  578. Great test idea!
    1
  579. Great test idea!
    1
  580. Great recommendation. Yes, I'll test them.
    1
  581. Thanks for the video idea!
    1
  582. Great point. Thank you
    1
  583. Thank you!
    1
  584. Thank you
    1
  585. Great point. Thank you
    1
  586. Thank you
    1
  587. Thank you! I'll test cutting discs soon. Thanks again!
    1
  588. Great test idea!
    1
  589. Great recommendation! Thank you
    1
  590. lol. Thanks
    1
  591. Thank you very much!
    1
  592. Thank you for the recommendation.
    1
  593. Great constructive feedback. Thank you
    1
  594. Thanks for the video idea!
    1
  595. Thank you
    1
  596. Thank you for the video idea!
    1
  597. I bet it would make a lot of smoke. Thank you
    1
  598. I'll test them soon. Thank you
    1
  599. Thanks for the video idea.
    1
  600. Thank you!
    1
  601. Thank you for the video idea!
    1
  602. Thanks again
    1
  603. Great point.
    1
  604. Thanks! Thanks for sharing.
    1
  605. Thanks for the video idea.
    1
  606. Thank you! I like it a lot.
    1
  607. Thank you!
    1
  608. Thanks for the video idea.
    1
  609. lol. Thank you
    1
  610. Thanks for sharing.
    1
  611. Thanks for the video idea!
    1
  612. Thank you! I'll definitely test drill bits.
    1
  613. Thank you
    1
  614. Thank you!
    1
  615. Thank you!
    1
  616. Thank you. I do some testing before the filming begins to ensure the testing process is working properly and providing accurate and repeatable results.
    1
  617. Thank you!
    1
  618. Thank you!
    1
  619. Thank you very much!
    1
  620. lol. Thanks
    1
  621. Thank you!
    1
  622. I should have done that! Thank you for the recommendation.
    1
  623. Thanks for the feedback.
    1
  624. Thanks for watching!
    1
  625. Thank you
    1
  626. Great test idea!
    1
  627. Thanks for the suggestion.
    1
  628. Thanks for the video idea.
    1
  629. Thank you!
    1
  630. Great recommendation. Thank you
    1
  631. Thank you!
    1
  632. Great test idea! Thank you
    1
  633. Great test recommendations! Thank you
    1
  634. Sorry to disappoint.
    1
  635. Thank you for the feedback
    1
  636. Sorry to disappoint. I'll test the Walter brand with the flap discs. Thanks again.
    1
  637. Thanks for the video idea.
    1
  638. Thanks for the suggestion.
    1
  639. Thank you
    1
  640. Great point. Mild steel.
    1
  641. Thank you
    1
  642. I'll test them very soon. Great test idea!
    1
  643. Thank you for requesting this one!
    1
  644. Thank you for the video idea!
    1
  645. Thank you!
    1
  646. Thank you for the video idea!
    1
  647. Thanks for the video idea!
    1
  648. You are welcome! Thanks for sharing.
    1
  649. Great recommendation! Thank you
    1
  650. Thank you
    1
  651. Thank you
    1
  652. Thank you!
    1
  653. Thank you!
    1
  654. Thank you!
    1
  655. Thank you!
    1
  656. Thanks for the video idea!
    1
  657. Thanks!
    1
  658. Thanks for the feedback.
    1
  659. I've had a cold for a while but I'm getting better. Thank you
    1
  660. Great test idea!
    1
  661. Great recommendations. Thank you!
    1
  662. Norton makes a great wheel!
    1
  663. Thank you!
    1
  664. Thank you for the video idea!
    1
  665. Sorry to disappoint. I'll include Walter in the Flap disc test.
    1
  666. Thanks for the feedback.
    1
  667. Thank you
    1
  668. Thank you!
    1
  669. Thank you for the video idea!
    1
  670. Thank you very much! Great test idea!
    1
  671. Great analysis!
    1
  672. Great test idea!
    1
  673. Great test idea! I've got the supplies ready. Just need to get to it.
    1
  674. Great point.
    1
  675. Thank you
    1
  676. Thank you!
    1
  677. Great test idea!
    1
  678. Great test idea! Thank you
    1
  679. Great point. Thank you
    1
  680. Thank you!
    1
  681. Great point. Thank you
    1
  682. Great point. Thank you
    1
  683. Thank you
    1
  684. Good Point!
    1
  685. Thank you!
    1
  686. Great video idea!
    1
  687. Great test idea on using an amp meter. I should torture test some grinders. That would be fun.
    1
  688. Great test idea! Thank you
    1
  689. I'll have to test those in the future. Thank you
    1
  690. Thank you and Merry Christmas!
    1
  691. Thank you very much!
    1
  692. Great test idea! Thank you
    1
  693. Thank you!
    1
  694. Great recommendation. Thank you
    1
  695. Thanks for the video idea.
    1
  696. Thank you
    1
  697. Thanks for sharing.
    1
  698. Thank you!
    1
  699. Thank you! Happy Veterans day to you and thank you for serving!
    1
  700. You're first! Thank you
    1
  701. Great point.
    1
  702. I wish I would have tested it. Thank you
    1
  703. Thanks for the feedback.
    1
  704. I'll test them soon. Thank you!
    1
  705. Thank you! I like the cutting speed of Milwaukee but they did seem to wear faster than the competition.
    1
  706. Thanks for the feedback.
    1
  707. Thanks for the suggestion.
    1
  708. Great test idea! Thank you
    1
  709. You are welcome!
    1
  710. lol. Thanks
    1
  711. Great test idea!
    1
  712. Thank you very much! I'm impressed with Avanti products.
    1
  713. Thanks for the suggestion.
    1
  714. Great point! I'll test them soon. Thank you!
    1
  715. Great point. Thank you
    1
  716. Thank you!
    1
  717. I'll do it. Great recommendation.
    1
  718. Great point! Thank you
    1
  719. lol. Yes, designing a test jig for some of these tests is very challenging.
    1
  720. Great point. Thank you
    1
  721. Great test idea! Thank you
    1
  722. Thank you!
    1
  723. Thanks so much!
    1
  724. Thank you!
    1
  725. Great point. Thank you.
    1
  726. Thank you for the video idea!
    1
  727. Great point. Thank you
    1
  728. Thank you and Happy New Year!
    1
  729. Great point. Thank you
    1
  730. Thank you!
    1
  731. Thanks for the positive comment!
    1
  732. I've got a list of people I sound like. lol
    1
  733. Thanks for the suggestion.
    1
  734. Thanks for the constructive feedback.
    1
  735. Great test idea!
    1
  736. Wow!
    1
  737. Thank you!
    1
  738. Thank you
    1
  739. Thanks for the recommendation.
    1
  740. Great test idea!
    1
  741. I'll test the Walter flap disc soon. Thank you
    1
  742. Thanks so much!
    1
  743. lol. Great point.
    1
  744. Great recommendation!
    1
  745. Thank you very much!
    1
  746. Great test idea! Thank you
    1
  747. Thank you for the constructive feedback. I'll do that for the upcoming cutoff wheel test. Thanks again.
    1
  748. Thanks for the feedback.
    1
  749. Thank you!
    1
  750. Thank you
    1
  751. Thank you for the video idea!
    1
  752. Thank you for doing the math!
    1
  753. Thank you!
    1
  754. Great test idea! Thank you
    1
  755. Thank you
    1
  756. Thank you very much!
    1
  757. Not yet. Great test idea!
    1
  758. Thank you!
    1
  759. Thanks for sharing.
    1
  760. Thanks for the recommendation.
    1
  761. Great point. Yes, it's a very hard wheel.
    1
  762. Thank you!
    1
  763. Thanks for the feedback.
    1
  764. Thank you
    1
  765. I'll do it. Great test idea!
    1
  766. Thank you!
    1
  767. Thanks for the recommendation!
    1
  768. Thanks for the feedback.
    1
  769. Thanks for the suggestion.
    1
  770. Thank you!
    1
  771. Great test idea!
    1
  772. Great test idea! Thank you
    1
  773. Thank you!
    1
  774. Thanks for the suggestion.
    1
  775. Thank you!
    1
  776. Thanks for the feedback.
    1
  777. Thanks for the constructive feedback. I do like a lot of the ideas people recommend. Thanks again.
    1
  778. Thank you!
    1
  779. I'll do it. Thank you
    1
  780. Great video idea! Thank you
    1
  781. Thanks for the recommendation on the grinder and wheel!
    1
  782. Great recommendation! I'll test this one soon!
    1
  783. Thank you for the video idea!
    1
  784. Thank you!
    1
  785. Thank you!
    1
  786. Great test idea!
    1
  787. Great test idea! Thank you
    1
  788. Great video idea! I'll test them soon.
    1
  789. Thanks for sharing. Thanks for the suggestion.
    1
  790. Awesome! Thank you!
    1
  791. Thank you!
    1
  792. Thank you for the feedback
    1
  793. Thank you very much!
    1
  794. Thank you for the constructive feedback. I'll do better on the next video.
    1
  795. Thanks for sharing.
    1
  796. Great video idea!
    1
  797. Thank you! The Norton wheel is definitely built to last! Thanks again.
    1
  798. Thanks for sharing.
    1
  799. Thank you for the video idea!
    1
  800. Thank you!
    1
  801. Thanks for the recommendation.
    1
  802. Great video idea!
    1
  803. Thank you!
    1
  804. Thank you
    1
  805. Thanks for the video idea.
    1
  806. Great point!
    1
  807. Great video idea! I'll do it. Thank you
    1
  808. Wow! Thanks for this information.
    1
  809. Thanks for sharing.
    1
  810. I like the Avanti too.
    1
  811. Great test idea!
    1
  812. Great question. I think it would be close.
    1
  813. Great recommendations. Thank you
    1
  814. Thank you for the video idea!
    1
  815. Awesome, thank you!
    1
  816. Great suggestion. Thank you.
    1
  817. Thank you very much!
    1
  818. Thanks for the suggestion.
    1
  819. Great point. Thank you
    1
  820. Great test idea!
    1
  821. Thank you! I have a cutting wheel video too
    1
  822. Thanks for the constructive feedback.
    1
  823. Great test idea. Thank you
    1
  824. Great test idea! Thank you
    1
  825. Thank you for the video idea!
    1
  826. Great recommendation! Thank you
    1
  827. Thank you
    1
  828. Great test recommendation. Thank you
    1
  829. Thank you!
    1
  830. Great test recommendation!
    1
  831. Thank you
    1
  832. Thanks for the feedback.
    1
  833. Great test idea! Thank you
    1
  834. Thank you
    1
  835. Thank you!
    1
  836. Thank you!
    1
  837. Thank you
    1
  838. Thank you!
    1
  839. Thank you!
    1
  840. Great video idea! Thank you
    1
  841. Thank you!
    1
  842. Thank you
    1
  843. Thanks for the test idea!
    1
  844. I wish I would have tested the Walter brand. I'll test their flap disc.
    1
  845. Yes, all were 24 grit. Great video idea!
    1
  846. Thank you!
    1
  847. Thank you!
    1
  848. Thank you very much for sharing the video! It helps
    1
  849. Great test idea!
    1
  850. Thank you!!
    1
  851. Thank you
    1
  852. Great test idea! I've got some cured osage orange that'll put any chain to the test! I dulled a chain this morning in about 30 minutes.
    1
  853. Great point. Thank you!
    1
  854. Thank you!
    1
  855. Thank you!
    1
  856. Thank you for the video idea!
    1
  857. Thank you!
    1
  858. Great test idea! Thank you
    1
  859. Great test idea!
    1
  860. Thank you
    1
  861. All great points. Thank you!
    1
  862. Thanks!
    1
  863. Thank you!
    1
  864. Thank you!
    1
  865. Thank you! The time it takes to develop a test varies significantly. This one required 3-4 hours to build and test the jig.
    1
  866. Thank you!
    1
  867. Great test idea!
    1
  868. Great video idea!
    1
  869. Thank you
    1
  870. Great point!
    1
  871. Thanks for the feedback!
    1
  872. Thank you very much!
    1
  873. Thanks for the video idea.
    1
  874. Thank you for the video idea!
    1
  875. Thank you!
    1
  876. Great test ideas! Thank you
    1
  877. Great point. Thank you. I believe 2 DeWalts would last as long.
    1
  878. lol. Thank you
    1
  879. They were all the same great. Thank you very much!
    1
  880. Thank you for the video idea!
    1
  881. Thank you!
    1
  882. You are welcome! Glad to hear!
    1
  883. Great recommendation!
    1
  884. Thanks and you are welcome!
    1
  885. Thank you!
    1
  886. Great recommendation. Thank you
    1
  887. Thanks! Thanks for the suggestion.
    1
  888. Thanks for the video idea.
    1
  889. Great video idea! Thank you
    1
  890. Thank you!
    1
  891. Thank you! Yes, I plan to test drill bits. Great recommendation!
    1
  892. Thanks for the suggestion.
    1
  893. Wow! That's a big investment. Diablo makes great products!
    1
  894. Thank you!
    1
  895. Thank you
    1
  896. Thank you!
    1
  897. Great point. Thank you
    1
  898. Thank you very much! I spent a LOT of time trying to figure out a fair testing process.
    1
  899. Thank you!
    1
  900. Thank you very much! Constructive criticism, if accepted, helps one improve. I've got a lot of room for improvement! Thanks again!
    1
  901. Great point. Thank you
    1
  902. Thank you for subscribing!
    1
  903. You are welcome!
    1
  904. Thank you for the video idea!
    1
  905. Thank you!
    1
  906. Thank you!
    1
  907. Great recommendation!
    1
  908. Thank you!
    1
  909. Not yet. Thanks for the test idea!
    1
  910. Thank you
    1
  911. Very interesting question. The grinder I used doesn't have variable speed. So, the RPM should have remained very close to the same. The wheels that were cutting faster would have slowed the RPM some, while the wheels with less bite would have allowed the wheels to spin a little faster. Thanks again.
    1
  912. Thank you!
    1
  913. I'll do it. Great test idea!
    1
  914. Great point. They take quality and their reputation very seriously
    1
  915. Thank you for the feedback
    1
  916. Thank you very much! I'll test the metal cutoff wheels soon.
    1
  917. You are welcome!
    1
  918. Thank you!
    1
  919. Great video idea!
    1
  920. Thank you very much!
    1
  921. Thank you!
    1
  922. Thank you!
    1
  923. Great point. Thank you
    1
  924. Thanks for the feedback.
    1
  925. Thanks for the suggestion.
    1
  926. Thank you!
    1
  927. Thank you
    1
  928. Great point. Thank you
    1
  929. Thank you
    1
  930. Thank you
    1
  931. Thank you!
    1
  932. Thank you for the video idea!
    1
  933. Great test idea! Thank you
    1
  934. Thank you
    1
  935. Thanks for the suggestion.
    1
  936. Great video idea!
    1
  937. Thank you!
    1
  938. Thank you very much!
    1
  939. Thank you very much for continuing to watch the channel! I greatly appreciate it!
    1
  940. Thanks for the feedback.
    1
  941. Thank you!
    1
  942. Great test idea!
    1
  943. Thank you!
    1
  944. Thank you!
    1
  945. Great point.
    1
  946. Thank you!
    1
  947. Thanks for the video idea.
    1
  948. I wish I would have tested it. Thank you
    1
  949. Thanks! Thanks for the suggestion.
    1
  950. Great test idea! Thank you
    1
  951. Thanks!
    1
  952. Thank you!
    1
  953. Thanks for the suggestion.
    1
  954. Great recommendation. Thank you
    1
  955. Great point. I should have done the math on this. Part of the issue is that some wheels don't wear away fast enough and they become clogged. Thanks again
    1
  956. Thanks for the video idea.
    1
  957. Wow! Thanks for commenting on this.
    1
  958. Thanks for the recommendation.
    1
  959. Great test idea!
    1
  960. Thank you!
    1
  961. Thank you
    1
  962. Thanks for watching!
    1
  963. Great point! Thank you
    1
  964. I need to test it soon. I've got some. Thank you
    1
  965. Greetings and thank you
    1
  966. Great point! Thanks for the video idea
    1
  967. lol.
    1
  968. Thank you!
    1
  969. Great recommendation. Thank you!
    1
  970. Thank you! I sound like I'm yelling even when I'm not.
    1
  971. Great recommendation. Thank you
    1
  972. This is great information. Thank you
    1
  973. Thank you very much!
    1
  974. Thank you!
    1
  975. I'm not on either of those yet. I should be.
    1
  976. Thank you for the feedback
    1
  977. Thank you!
    1
  978. Thank you very much!
    1
  979. Great recommendation. Thank you
    1
  980. Thank you
    1
  981. Thank you very much!
    1
  982. lol. Thank you!
    1
  983. Thank you for commenting on your experience with these brands. I bought the Makita off of Amazon.
    1
  984. Thanks so much!
    1
  985. Thanks for the positive comment.
    1
  986. Thank you!
    1
  987. Thanks for the suggestion.
    1
  988. Thank you. Sorry I wasn't clear on this. The warrior brand is sold by Harbor Freight. Thanks again
    1
  989. Thank you for requesting this one!
    1
  990. Thanks for sharing.
    1
  991. Great point. Thank you
    1
  992. Thanks for the test idea!
    1
  993. Thank you!
    1
  994. Thanks for the constructive feedback
    1
  995. Thank you!
    1
  996. Great suggestion! Thank you!
    1
  997. Thank you very much!
    1
  998. Great point. Thank you
    1
  999. Thank you
    1
  1000. Thank you very much!
    1
  1001. Thanks so much!
    1
  1002. Thank you!
    1
  1003. Thank you
    1
  1004. Great deals! Thank you
    1
  1005. Thank you
    1
  1006. Thank you for the recommendation!
    1
  1007. Thank you
    1
  1008. Thanks for the suggestion.
    1
  1009. Thank you for the video idea!
    1
  1010. Thank you
    1
  1011. lol. I'm very surprised my old angle grinder is still working. It's had a lot of use.
    1
  1012. Thanks for the feedback.
    1
  1013. Great recommendation.
    1
  1014. Great point. It may seem silly, but I wear a respirator to keep my nose and lungs clean.
    1
  1015. Thanks for the suggestion.
    1
  1016. lol. It was bright inside the shop during testing!
    1
  1017. lol. Thank you!
    1
  1018. This is great information. Thank you!
    1
  1019. Thank you for the feedback
    1
  1020. Great test idea! Thank you
    1
  1021. Great test idea!
    1
  1022. Thank you for the feedback!
    1
  1023. Thank you for the video idea!
    1
  1024. Thanks!
    1
  1025. LOL! Thanks!
    1
  1026. Thank you for the feedback
    1
  1027. Thank you
    1
  1028. Great test idea!
    1
  1029. Thank yo very much! Great point.
    1
  1030. I'll do it. Thank you!
    1
  1031. Great test idea!
    1
  1032. Great video idea! I'll do it.
    1
  1033. Thank you
    1
  1034. Yes, great recommendation!
    1
  1035. Thank you! Great constructive feedback too. Thanks again.
    1
  1036. Yes, I'll do it. Thank you
    1
  1037. Thanks for the video idea!
    1
  1038. I believe you are right. Thank you
    1
  1039. Thank you!
    1
  1040. Thank you!
    1
  1041. Thanks for the suggestion.
    1
  1042. Wow! The big wheels aren't designed for such high RPM! Thank you for the positive comment on the video.
    1
  1043. Thank you for the recommendation!
    1
  1044. Thank you very much!
    1
  1045. Thank you too
    1
  1046. It is a much harder wheel than the others. Thank you
    1
  1047. Thank you!
    1
  1048. Thank you!
    1
  1049. Thank you!
    1
  1050. Thank you very much!
    1
  1051. Thank you!
    1
  1052. Thanks for the constructive feedback.
    1
  1053. Sorry I didn't test those.
    1
  1054. Thank you!
    1
  1055. You are welcome.
    1
  1056. Thank you very much! I wonder why you didn't get a notification.
    1
  1057. Thanks for the recommendation!
    1
  1058. Thank you!
    1
  1059. Great video ideas! Thank you
    1
  1060. Thanks for the recommendation.
    1
  1061. Thanks for watching!
    1
  1062. Thank you very much!
    1
  1063. Thank you!
    1
  1064. Great point.
    1
  1065. Thank you
    1
  1066. Thank you. I enjoyed testing the metal grinding wheels in this video and will test cutting wheels soon.
    1
  1067. Thank you!
    1
  1068. Thanks for the feedback.
    1
  1069. Nice price!
    1
  1070. Thank you!
    1
  1071. Thank you
    1
  1072. Thank you very much!
    1
  1073. Thank you!
    1
  1074. Thank you
    1
  1075. Great point. Thank you
    1
  1076. Thank you for the constructive feedback
    1
  1077. I'll do it soon. Thank you!
    1
  1078. Thank you
    1
  1079. Great feedback. Thank you
    1
  1080. Thank you
    1
  1081. Thank you!
    1
  1082. Thank you!
    1
  1083. Thank you!
    1
  1084. Thanks for the suggestion.
    1
  1085. Thank you very much!
    1
  1086. Thank you!
    1
  1087. Thanks for the feedback.
    1
  1088. Thanks for the feedback.
    1
  1089. Great recommendation. Thank you.
    1
  1090. Thank you!
    1
  1091. Thank you very much! Yes, the wiper testing does sound like a great one thanks again.
    1
  1092. Great test idea!
    1
  1093. Thanks for the feedback.
    1
  1094. Thank you for the video idea!
    1
  1095. Great test idea! Thank you
    1
  1096. Thank you!
    1
  1097. Yes, the HF grinding discs actually did fine compared to blade testing. Thanks again.
    1
  1098. Thank you for the video idea!
    1
  1099. Great point. I need to buy a better scale soon.
    1
  1100. Thank you very much!
    1
  1101. Thank you!
    1
  1102. Cutoff wheel test coming soon. Thank you!
    1
  1103. Great recommendation. Thank you!
    1
  1104. Thank you!
    1
  1105. Thank you!
    1
  1106. Great point.
    1
  1107. lol. Thank you
    1
  1108. Thank you! Diablo cuts very fast but they wear out fast too.
    1
  1109. Thank you!
    1
  1110. Thank you
    1
  1111. Thanks for the feedback.k
    1
  1112. Thanks, Todd.
    1
  1113. Thanks for the test idea!
    1
  1114. Thanks for sharing.
    1
  1115. Great video idea!
    1
  1116. Thank you!
    1
  1117. Great recommendation! Thank you
    1
  1118. Thanks for the video idea.
    1
  1119. lol. Thank you
    1
  1120. Great point.
    1
  1121. Great recommendation!
    1
  1122. Thank you!
    1
  1123. This is great information. Thank you
    1
  1124. Great recommendation! Thank you
    1
  1125. Thank you for the video idea!
    1
  1126. Thank you for the video idea!
    1
  1127. Thank you!
    1
  1128. Thank you!
    1
  1129. Thank you!
    1
  1130. Thank you for the video idea!
    1
  1131. Great point
    1
  1132. Thanks for the feedback.
    1
  1133. Thank you!
    1
  1134. Thank you very much!
    1
  1135. Thank you!
    1
  1136. Thank you for the video idea!
    1
  1137. Thanks for the feedback.
    1
  1138. Thank you for the video idea!
    1
  1139. Thank you for the video idea!
    1
  1140. Great test idea on the composite fiber disks. Thank you!
    1
  1141. Thank you! Great point on the shipping costs.
    1
  1142. Thanks for the recommendation.
    1
  1143. Thank you! Great test idea!
    1
  1144. Thank you for the constructive feedback. I'll do better at this.
    1
  1145. Thank you
    1
  1146. Thank you
    1
  1147. I'll test the cutoff wheels soon. Thank you!
    1
  1148. Thanks for the recommendation.
    1
  1149. Great recommendation. Thank you
    1
  1150. Thank you!
    1
  1151. Thanks for the suggestion.
    1
  1152. Great test idea!
    1
  1153. Thank you very much for supporting the channel! I spend a ton of money on supplies and the support helps!
    1
  1154. I buy them from Home Depot and Amazon. Thanks again
    1
  1155. Thank you!
    1
  1156. Thank you for the feedback
    1
  1157. Thanks for the positive comment.
    1
  1158. Great video idea!
    1
  1159. Thank you
    1
  1160. Thanks for letting me know! I'll be careful when I test them.
    1
  1161. Thanks for the positive comment!
    1
  1162. Thank you very much for supporting the channel!
    1
  1163. lol. Thanks
    1
  1164. Thanks again for the terrific analysis!
    1
  1165. Great point.
    1
  1166. Thank you for the video idea!
    1
  1167. Thank you!
    1
  1168. Thank you!
    1
  1169. Great test idea! Thank you.
    1
  1170. Thanks for the video idea.
    1
  1171. Great point. I'll include that information when I test cutting wheels.
    1
  1172. Thank you!
    1
  1173. Thank you!
    1
  1174. Thanks for sharing
    1
  1175. Thank you! I wonder the same thing.
    1
  1176. Thank you for the video idea!
    1
  1177. Thank you!
    1
  1178. Thank you
    1
  1179. Thank you!
    1
  1180. Great video idea!
    1
  1181. I need to test Walter products soon.
    1
  1182. Thanks for the feedback.
    1
  1183. Great point. Thank you
    1
  1184. Great recommendation. Thank you
    1
  1185. Great recommendation.
    1
  1186. Thanks for sharing.
    1
  1187. Great test idea! I'll see what I can do.
    1
  1188. Thank you
    1
  1189. Thank you!
    1
  1190. I'll test them soon. Thank you!
    1
  1191. Great test idea!
    1
  1192. Thank you very much!
    1
  1193. Thank you
    1
  1194. Great test idea!
    1
  1195. Thank you!
    1
  1196. Thank you very much!
    1
  1197. Oh no! Sorry this happened to you. I hope it was just a minor cut.
    1
  1198. Great point.
    1
  1199. Thank you!
    1
  1200. Hi Kenny, What city are you near? I'm in Peculiar. Trying to figure out the best way to test drill bits. Could you please create a new comment or send an email to me at projectfarm52@gmail.com Thanks, Todd
    1
  1201. Excellent point! Thank you!
    1
  1202. Yes, I'll do it. Thank you
    1
  1203. Thank you for the constructive feedback.
    1
  1204. Nice! Thank you
    1
  1205. Thank you!
    1
  1206. Thank you!
    1
  1207. Thank you and I'll definitely test the cutoff wheels soon. Thanks again.
    1
  1208. Great test idea! I'll do it.
    1
  1209. Thank you!
    1
  1210. Great test idea! I'll do it.
    1
  1211. Thank you for the test idea!
    1
  1212. Great video idea! I'll test them soon.
    1
  1213. Thank you!
    1
  1214. Glad to help!
    1
  1215. lol. Thank you!
    1
  1216. Thanks for the feedback.
    1
  1217. Great test idea!
    1
  1218. Thank you!
    1
  1219. Thank you!
    1
  1220. Thank you!
    1
  1221. Thanks for the feedback.
    1
  1222. Great test idea!
    1
  1223. Thanks for the video idea.
    1
  1224. Thank you very much!
    1
  1225. Thank you!
    1
  1226. Wow! Thanks for this information.
    1
  1227. Thank you and God bless
    1
  1228. I agree. Thank you
    1
  1229. Great test idea! Thank you
    1
  1230. Thanks for sharing.
    1
  1231. Thanks for the suggestion.
    1
  1232. lol. Thanks. I couldn't find a Lenox grinding wheel at the place that sells the Lenox product.
    1
  1233. Great point. I'll be testing more of the products in future videos.
    1
  1234. Thanks for the recommendation.
    1
  1235. Thank you very much! I need to test hot glue soon.
    1
  1236. Thank you for the feedback!
    1
  1237. Thank you!
    1
  1238. Thank you!
    1
  1239. Great test idea! Thank you
    1
  1240. Thank you!
    1
  1241. I'll test flap disks soon. Great recommendation!
    1
  1242. Thanks for the recommendation.
    1
  1243. Great test idea!
    1
  1244. lol. Thank you
    1
  1245. Thank you!
    1
  1246. This is interesting information. Thank you
    1
  1247. Great video idea! Thank you
    1
  1248. Thank you
    1
  1249. Thanks for sharing.
    1
  1250. Thank you! They seem like a great value.
    1
  1251. Thank you! They seem like a great value.
    1
  1252. Great test idea! Thank you
    1
  1253. Great point! Thank you
    1
  1254. Thank you very much for the positive comment!
    1
  1255. Thanks for the suggestion.
    1
  1256. Thank you for the test idea!
    1
  1257. lol. Thank you
    1
  1258. Thank you!
    1
  1259. Great recommendation. Thank you
    1
  1260. Great point! That may have been the issue with the Norton. Thank you
    1
  1261. Thank you
    1
  1262. Thank you!
    1
  1263. lol. Thank you
    1
  1264. Thank you!
    1
  1265. Thank you
    1
  1266. Sorry to disappoint with this.
    1
  1267. Great point on the Nortons! I wish I would have tested SAIT.
    1
  1268. I'll do it. Great test idea!
    1
  1269. Thanks for the test idea!
    1
  1270. Thank you!
    1
  1271. Great test idea!
    1
  1272. Thank you for the video idea! I'll test them soon.
    1
  1273. Thanks!
    1
  1274. Thank you
    1
  1275. Thanks for the video idea.
    1
  1276. Thank you! I enjoy trying to figure out things like this.
    1
  1277. Thank you
    1
  1278. Thank you!
    1
  1279. Thanks for the feedback.
    1
  1280. Thank you
    1
  1281. You are welcome! Thanks for the suggestion.
    1
  1282. Great point. Thank you
    1
  1283. Great test idea! Thank you
    1
  1284. Great point. There was another comment about the Norton wheel getting clogged.
    1
  1285. Thank you for the video idea!
    1
  1286. Thank you for the video idea!
    1
  1287. Thank you!
    1
  1288. Thank you
    1
  1289. Thanks for the feedback.
    1
  1290. Thank you!
    1
  1291. Great point. I need to include them as well.
    1
  1292. Great test idea! Thank you
    1
  1293. Thank you!
    1
  1294. Thank you!
    1
  1295. Thank you
    1
  1296. Not yet. Thanks for the video idea.
    1
  1297. Thanks for the suggestion.
    1
  1298. Thanks for the video idea.
    1
  1299. Thank you for the video ideas!
    1
  1300. Thank you very much!
    1
  1301. Thank you! The Lenox testing is coming soon.
    1
  1302. Thanks for the suggestion.
    1
  1303. Thank you!
    1
  1304. Thanks for sharing.
    1
  1305. Thanks for the recommendation.
    1
  1306. Thank you!
    1
  1307. Great test idea!
    1
  1308. Great point.
    1
  1309. Great point. Great video idea on durability.
    1
  1310. Thank you!
    1
  1311. Thanks for the suggestion.
    1
  1312. Thanks for the recommendation!
    1
  1313. You are welcome!
    1
  1314. Thank you
    1
  1315. Thank you very much!
    1
  1316. Thank you!
    1
  1317. Thank you
    1
  1318. I agree. Thank you
    1
  1319. Thank you!
    1
  1320. Thank you!
    1
  1321. Thanks for the video idea.
    1
  1322. I'll do it soon. Great test idea!
    1
  1323. Thank you!
    1
  1324. Great point. Thank you
    1
  1325. Great test idea!
    1
  1326. Thank you!
    1
  1327. Thank you!
    1
  1328. Great video idea! Thank you
    1
  1329. Thank you!
    1
  1330. Thank you!
    1
  1331. Thank you!
    1
  1332. Great test idea!
    1
  1333. Must have been quite an experience!
    1
  1334. Great suggestion! Thank you
    1
  1335. Thanks for sharing.
    1
  1336. Thank you!
    1
  1337. Great video idea! Thank you
    1
  1338. Thank you!
    1
  1339. Thanks for the suggestion.
    1
  1340. Thank you!
    1
  1341. Thank you!
    1
  1342. Thanks for the feedback.
    1
  1343. I'll do it. Thank you!
    1
  1344. Thank you!
    1
  1345. Great point. Thank you
    1
  1346. lol. Great point.
    1
  1347. Thank you!
    1
  1348. Thank you very much!
    1
  1349. Thanks for the test idea!
    1
  1350. Thank you!
    1
  1351. Great video idea! I'll do it.
    1
  1352. Great test idea! Thank you
    1
  1353. Great test idea!
    1
  1354. lol. Thank you
    1
  1355. Great test idea!
    1
  1356. Great point. Thank you
    1
  1357. Thanks again!
    1
  1358. Great point. Thank you
    1
  1359. Wow! That is interesting.
    1
  1360. Great point. Thank you!
    1
  1361. You are welcome!
    1
  1362. Yes, there is a decompression mechanism that only engages until the engine reaches normal running speed. Thank you
    1
  1363. Thanks for the feedback.
    1
  1364. Thank you!
    1
  1365. Thank you for this recommendation! Developing a good test design was the most challenging part.
    1
  1366. Great test idea!
    1
  1367. Thanks for the video idea!
    1
  1368. Great test idea! Thank you
    1
  1369. Great test idea! Thank you
    1
  1370. Thank you very much!
    1
  1371. Thank you!
    1
  1372. Thank you
    1
  1373. Thank you!
    1
  1374. Than you very much!
    1
  1375. Thanks, will do!
    1
  1376. Thank you!
    1
  1377. Great video ideas. Thank you
    1
  1378. Thank you
    1
  1379. Great point. I wish I would have tested them.
    1
  1380. Great point.
    1
  1381. Thanks! Thanks for sharing.
    1
  1382. Great video idea!
    1
  1383. Thank you!
    1
  1384. lol. Nice!
    1
  1385. Thank you
    1
  1386. Thank you!
    1
  1387. Thank you
    1
  1388. Great point! Thank you.
    1
  1389. Thanks for watching!
    1
  1390. Great point on concessional use and expense!
    1
  1391. Thanks for the feedback.
    1
  1392. Great test idea! Thank you
    1
  1393. Thank you!
    1
  1394. Thank you!
    1
  1395. Thank you! I hope the manufacturers do watch the videos and find a way to improve their products. I really enjoy using high-performing tools and supplies. Thanks again!
    1
  1396. lol. Thank you
    1
  1397. Great point. The drill is a good one and survived.
    1
  1398. Thanks for the video idea.
    1
  1399. Thank you very much!
    1
  1400. Great test idea! Thank you
    1
  1401. Thanks for sharing.
    1
  1402. Great video idea! I'll test them soon.
    1
  1403. Great test idea!
    1
  1404. Thank you very much!
    1
  1405. Great point. Thank you
    1
  1406. Thank you!
    1
  1407. Thank you
    1
  1408. Thank you! Great constructive feedback too Thanks again!
    1
  1409. Thank you!
    1
  1410. Thanks for the suggestion.
    1
  1411. Thank you very much!
    1
  1412. Thanks for the video ideas.
    1
  1413. Thank you!
    1
  1414. It was a fun test! Thank you
    1
  1415. You're welcome and thanks for watching!
    1
  1416. I'm very interested in the stone cylinder head too. I've got to find a stone that I can drill and shape without it breaking.
    1
  1417. Thank you!
    1
  1418. Thank you!
    1
  1419. Thank you!
    1
  1420. Thank you
    1
  1421. Thank you
    1
  1422. Great recommendation for a round 2 video
    1
  1423. Thank you! Great test idea!
    1
  1424. Great recommendation. I'll test their flap disc.
    1
  1425. Thanks for the feedback.
    1
  1426. Thanks for the recommendation.
    1
  1427. Thanks for the suggestion.
    1
  1428. Thank you!
    1
  1429. Thank you!
    1
  1430. Thanks and you are welcome!
    1
  1431. Thank you very much!
    1
  1432. I'll have to check this. Great point.
    1
  1433. Great test idea! I'll see what I can do.
    1
  1434. Thanks for the video idea.
    1
  1435. Great test idea!
    1
  1436. Great recommendation. Thank you
    1
  1437. Thank you for the video idea!
    1
  1438. Great point. Thank you
    1
  1439. Could you please help me understand? What is YouTube video compression?
    1
  1440. Great point!
    1
  1441. Thanks for the video idea.
    1
  1442. Thank you
    1
  1443. I'll test them soon. Thank you
    1
  1444. Thanks for the recommendation.
    1
  1445. lol. Thank you!
    1
  1446. Great video idea!
    1
  1447. Thank you!
    1
  1448. Thank you very much!
    1
  1449. I got them on sale for just .99 each.
    1
  1450. Great test idea!
    1
  1451. Thank you for the feedback
    1
  1452. Thank you very much for the positive comments and Happy Thanksgiving to you and your family too.
    1
  1453. Thank you!
    1
  1454. Thank you!
    1
  1455. Thank you for the video idea!
    1
  1456. Great point
    1
  1457. Great point.
    1
  1458. Great point. Thank you
    1
  1459. Thanks! Thanks for the suggestion.
    1
  1460. Thanks for the video idea.
    1
  1461. Thank you. I think the HF ones are just fine too.
    1
  1462. Great video idea!
    1
  1463. Thanks for the recommendation.
    1
  1464. Thanks for watching!
    1
  1465. Thank you very much!
    1
  1466. Sorry for the delay. Yes, I will compare them. I'm still working on test equipment for the testing.
    1
  1467. Thank you
    1
  1468. Thank you
    1
  1469. Great recommendation. Thank you
    1
  1470. Great test idea! Thank you
    1
  1471. Thank you
    1
  1472. They make a terrific grinding wheel. They last a long time!
    1
  1473. Great information. Thank you
    1
  1474. lol. Thank you
    1
  1475. Geat test idea! I'll test them soon.
    1
  1476. Great point!
    1
  1477. Thank you!
    1
  1478. Thanks and you are welcome!
    1
  1479. Thank you for the video idea
    1
  1480. lol. Great point!
    1
  1481. Thanks for commenting on this. The abrasive material of the DeWalt wheels I used in testing looked much different than the Warrior wheel. I seem to recall that the Warrior is made in China and the DeWalt in Canada. Maybe the Warrior brand has multiple suppliers.
    1
  1482. I keep thinking about it but other projects on the farm keep taking priority. lol. I won't use the tractor too much this winter anyway. So, I should find time to adjust the valves before things get busy around the farm this summer.
    1
  1483. Thank you. They were all the same grit.
    1
  1484. You are welcome!
    1
  1485. Great test idea! Thank you
    1
  1486. Thank you
    1
  1487. Thank you!
    1
  1488. Thank you
    1
  1489. Great recommendation. Thank you
    1
  1490. Great point! Thank you
    1
  1491. Thank you!
    1
  1492. Great point. I didn't measure surface smoothness but that's a great consideration.
    1
  1493. Thank you for the video idea!
    1
  1494. Great recommendation. Thank you
    1
  1495. Thank you!
    1
  1496. Thank you
    1
  1497. I'll test cutoff wheels soon. Thank you
    1
  1498. Thank you!
    1
  1499. Thank you
    1
  1500. Thanks
    1
  1501. Thank you!
    1
  1502. Thank you for the video idea!
    1
  1503. Thank you. I'll test penetrating fluids again.
    1
  1504. Thank you
    1
  1505. Thank you!
    1
  1506. Great test idea!
    1
  1507. I'll do it! Great recommendation.
    1
  1508. Thank you
    1
  1509. Thanks for the recommendation.
    1
  1510. Great!
    1
  1511. Great test idea! Thank you
    1
  1512. Great test idea! Thank you
    1
  1513. Great test idea!
    1
  1514. Thank you
    1
  1515. Thanks, will do!
    1
  1516. Winter is here. Too much coffee. lol
    1
  1517. Great point. Thank you
    1
  1518. Thank you
    1
  1519. Thank you
    1
  1520. Thank you very much! Great test idea! Thank you
    1
  1521. Thank you!
    1
  1522. Thanks for the constructive feedback.
    1
  1523. Great recommendation. I'll test them soon.
    1
  1524. Great test idea! Thank you
    1
  1525. Thank you
    1
  1526. Thank you!
    1
  1527. Great point. Thank you
    1
  1528. Thank you very much!
    1
  1529. Thank you
    1
  1530. Great constructive feedback. I'll do this analysis for the cutoff wheels.
    1
  1531. Great test idea!
    1
  1532. Thanks for the suggestion. Thanks!
    1
  1533. Great test idea! Thank you
    1
  1534. Thanks for the video idea.
    1
  1535. Thank you!
    1
  1536. Thank you for the feedback
    1
  1537. Great point. Thank you
    1
  1538. You are welcome!
    1
  1539. Great point!
    1
  1540. Thank you for the video idea!
    1
  1541. Thank you
    1
  1542. Great point. Thank you!
    1
  1543. Thank you!
    1
  1544. Yes, they were all the same grit and designed for metal. Thanks again.
    1
  1545. Thank you!
    1
  1546. Thanks for the video idea.
    1
  1547. Welcome and thanks!
    1
  1548. lol! Thank you
    1
  1549. Thank you!
    1
  1550. Thank you!
    1
  1551. Great point. Thank you
    1
  1552. Thank you!
    1
  1553. Thanks! Thanks for sharing.
    1
  1554. Thanks! Thanks for the video idea.
    1
  1555. Great test idea!
    1
  1556. Thank you very much!
    1
  1557. Great point. Thank you
    1
  1558. Thanks!
    1
  1559. You are right. Thank you
    1
  1560. Thank you!
    1
  1561. Great point. Thank you
    1
  1562. Thank you very much!
    1
  1563. Thank you!
    1
  1564. Thanks for the video idea!
    1
  1565. Thank you
    1
  1566. Thank you
    1
  1567. Great video idea!
    1
  1568. Great video idea!
    1
  1569. Thanks for the suggestion.
    1
  1570. Thank you!
    1
  1571. Thanks! Thanks for sharing.
    1
  1572. Great test idea! Thank you
    1
  1573. Sorry if I spoke too quickly. Trying to keep the videos as concise as possible.
    1
  1574. Thank you!
    1
  1575. Thank you!
    1
  1576. Thanks for the video idea.
    1
  1577. Thank you very much! I'll test the cutoff wheels soon. Thanks again!
    1
  1578. Thanks for the feedback.
    1
  1579. Great test idea!
    1
  1580. Thank you for the video idea!
    1
  1581. Thank you! I hope this helps if the watched.
    1
  1582. Great point! Thank you
    1
  1583. Thank you!
    1
  1584. Thank you very much!
    1
  1585. Thank you! I wish I would have tested the cubitron.
    1
  1586. Great point. Thank you!
    1
  1587. Thank you!
    1
  1588. Thank you!
    1
  1589. Thank you!
    1
  1590. Thank you!
    1
  1591. Thanks for the video idea.
    1
  1592. Great test idea! I'll do it!
    1
  1593. Great point. Thank you
    1
  1594. This is interesting. The ones I tested had a much different texture than DeWalt and weren't nearly as hard. I presume Harbor Freight has multiple suppliers.
    1
  1595. Thanks for the video idea.
    1
  1596. Thanks for the feedback.
    1
  1597. Thank you!
    1
  1598. Thank you very much!!
    1
  1599. Thanks for the test idea!
    1
  1600. Thanks for watching!
    1
  1601. Great recommendation! I should have mentioned that I used a large box fan to cool the grinder and test jig for several minutes between test. Great point on overheating too.
    1
  1602. Thank you!
    1
  1603. Thanks for the constructive feedback.
    1
  1604. Thanks for sharing.
    1
  1605. Great point. Thank you
    1
  1606. Thank you!
    1
  1607. Great test idea!
    1
  1608. Great recommendation! I'll improve in this area.
    1
  1609. Great test idea!
    1
  1610. Thanks for the feedback.
    1
  1611. You are welcome! Glad it was helpful!
    1
  1612. Thanks so much!
    1
  1613. Sorry to disappoint on the 3M wheel. Maybe I can test it in the future.
    1
  1614. Thank you
    1
  1615. Thank you!
    1
  1616. Thank you!
    1
  1617. Yes, I'll test one soon. Thank you!
    1
  1618. Great test idea!
    1
  1619. Thank you
    1
  1620. Wow! Sounds like a bad experience. Probably some ginding wheel skin injury to go with it.
    1
  1621. Thank you for the video idea!
    1
  1622. Thank you!
    1
  1623. Thanks for the feedback.
    1
  1624. Thanks for the test idea!
    1
  1625. Free shipping is nice!
    1
  1626. Great test idea! I'll do it.
    1
  1627. Convenience makes a huge difference for me too. Thank you!
    1
  1628. Thank you very much!
    1
  1629. Thank you!
    1
  1630. Thanks for the feedback.
    1
  1631. Thanks for the suggestion.
    1
  1632. Thank you for the video idea!
    1
  1633. Thanks for the suggestion.
    1
  1634. Thank you
    1
  1635. Great video idea!
    1
  1636. Thank you for the video idea!
    1
  1637. Great test idea! Thank you
    1
  1638. Thanks for sharing.
    1
  1639. Great video idea!
    1
  1640. Great video idea!
    1
  1641. Thank you! Thanks for the video idea.
    1
  1642. Thank you!
    1
  1643. Great point. I will likely buy a better scale for future testing.
    1
  1644. Thank you
    1
  1645. Great test idea!
    1
  1646. Thanks for the suggestion.
    1
  1647. Thank you!
    1
  1648. Thanks for the test idea!
    1
  1649. Thanks for the feedback.
    1
  1650. lol. Yes, I drink lots of coffee to deal with the cold of winter. lol
    1
  1651. Thank you!
    1
  1652. Great recommendation. Thank you
    1
  1653. Thanks for the video idea.
    1
  1654. Great recommendation. Thank you
    1
  1655. Thanks for the video idea.
    1
  1656. Great test idea!
    1
  1657. Thanks for the video idea!
    1
  1658. Thanks for the positive comment
    1
  1659. Andrew, great point. Thank you
    1
  1660. Thank you very much.
    1
  1661. Thank you very much!
    1
  1662. You are welcome! Thanks for the feedback.
    1
  1663. Thank you!
    1
  1664. Thank you!
    1
  1665. Thank you!
    1
  1666. Thank you!
    1
  1667. I'll do it. Thank you
    1
  1668. Great test idea!
    1
  1669. Thank you very much!
    1
  1670. Thanks for the feedback.
    1
  1671. You are welcome!
    1
  1672. Thanks for the video idea.
    1
  1673. Thank you very much!
    1
  1674. Thank you very much!
    1
  1675. Great video idea! Thank you
    1
  1676. I need to test this one. Thank you!
    1
  1677. Thank you!
    1
  1678. Thank you!
    1
  1679. Great test idea! I'll test the 36/40 grit soon.
    1
  1680. Thanks for the constructive feedback
    1
  1681. Thanks for the constructive feedback.
    1
  1682. Thank you!
    1
  1683. Thanks for the suggestion.
    1
  1684. Great recommendation!
    1
  1685. Great test idea! Thank you
    1
  1686. Thanks for the suggestion.
    1
  1687. Thank you!
    1
  1688. Thank you!
    1
  1689. Thank you for the feedback
    1
  1690. lol. Great point.
    1
  1691. Thanks for the feedback.
    1
  1692. Thank you very much!
    1
  1693. Thank you
    1
  1694. Thank you!
    1
  1695. Thank you!
    1
  1696. Thank you
    1
  1697. Thank you!
    1
  1698. Great point.
    1
  1699. I'll do it. Do you have any brands you'd like for me to test? Could you create a new comment so I can find your recommendations? I wish I had time to read through all the original comments more than once but I just don't.
    1
  1700. Thanks for the suggestion.
    1
  1701. Thank you!
    1
  1702. Thanks for the feedback.
    1
  1703. Thank you!
    1
  1704. Great test idea!
    1
  1705. Thank you very much!
    1
  1706. Thank you!
    1
  1707. Thank you!
    1
  1708. Thank you!
    1
  1709. Thanks for the feedback.
    1
  1710. Thanks for the video idea.
    1
  1711. Great point!
    1
  1712. This is great information on the discs coming apart. I'll test flap discs soon. Thank you
    1
  1713. Great point. Thank you
    1
  1714. Thank you!
    1
  1715. Thank you very much!
    1
  1716. Thank you! Norton will last a long time but it is expensive.
    1
  1717. Thanks so much!
    1
  1718. Thank you!
    1
  1719. Thank you!
    1
  1720. Thank you! I'll test batteries soon. I'm very curious about this one too.
    1
  1721. Thank you very much!
    1
  1722. Thanks for the video idea!
    1
  1723. Thanks for sharing.
    1
  1724. Thank you very much!
    1
  1725. I appreciate that!
    1
  1726. Thank you
    1
  1727. I've got a 4-episode series coming soon! Thank you
    1
  1728. Welcome! Thanks for watching and subscribing!
    1
  1729. Thank you for doing the math!
    1
  1730. Thank you very much!
    1
  1731. Great test idea! Thank you
    1
  1732. Thank you!
    1
  1733. Thank you!
    1
  1734. Thank you very much!
    1
  1735. Great test ideas! Thank you
    1
  1736. Great test ideas!
    1
  1737. Great test idea. Thank you
    1
  1738. Great point. The Norton is a great wheel but it doesn't seem to cut as fast as the others.
    1
  1739. Thank you!
    1
  1740. Thanks!
    1
  1741. Great test idea! Thank you
    1
  1742. Thank you!
    1
  1743. Thank you!
    1
  1744. Great recommendation. Thank you
    1
  1745. Great test idea! Thank you
    1
  1746. Thanks for watching.
    1
  1747. Thanks for the constructive feedback.
    1
  1748. Great test idea! Thank you
    1
  1749. Thank you
    1
  1750. Thank you!
    1
  1751. Thank you
    1
  1752. Thank you!
    1
  1753. Great point! Thank you
    1
  1754. Great point! Thank you
    1
  1755. Thanks for the suggestion.
    1
  1756. Thanks for the feedback.
    1
  1757. Great recommendation! Thank you
    1
  1758. Great video idea! I'll test them soon.
    1
  1759. Thanks
    1
  1760. Thank you!
    1
  1761. Thank you!
    1
  1762. Thank you
    1
  1763. I'll do it soon. Thank you!
    1
  1764. Thank you!
    1
  1765. Thank you
    1
  1766. Thank you!
    1
  1767. Glad I could help!
    1
  1768. Thanks for the constructive feedback
    1
  1769. Great video idea! I'll do it.
    1
  1770. lol. Thank you!
    1
  1771. Thank you for the video idea!
    1
  1772. Thank you!
    1
  1773. Thank you!
    1
  1774. Hi Kitty, Thank you very much!
    1
  1775. Great point. I've had wheels fall apart during use too.
    1
  1776. Thank you! I'll test cutting disks soon.
    1
  1777. Thanks for the recommendation.
    1
  1778. Thank you!
    1
  1779. Yes, I'll test flap disks soon. Great recommendation! Thank you
    1
  1780. Thanks for the idea.
    1