Comments by "79tazman" (@79tazman) on "NoNonsenseKnowHow" channel.

  1. Pole Barn Garage would go crazy over that old Ford he loves those things with their big blocks
    18
  2. Same here i subbed to him because of that Fury Wagon and that Tonka truck he was working on
    7
  3.  @crforfreedom7407  No one will restore the thing you high? It's a good worker that you can move dirt with. some guy has a plot of land looking on doing dirt work can buy that and get it done and save money on renting one or hiring someone. but the thing is not worth restoring but it's worth getting work done. I started my company on old cheap equipment just like that.
    5
  4. Yeah I'm sure that's total BS because everyone that owns one and knows what they are know they are great engines and boats Chrysler was a big seller in the 60's and 70's of inboard and outboard motors. I have been around boats all my life and everyone I know of the old guys know that Chrysler were great runners. I have two of them a 20hp and a 115hp and they run like a top and get bugged all the time to sell them
    4
  5.  @scottgibbs7235  I agree I like VVG but I like guys that don't have to put on a act and try to be funny just be normal
    4
  6. A set of headers and aftermarket intake will for sure give it more power and porting the heads would help it too.
    4
  7. I doubt you will get that thing running with a plug out for who knows how long and the rain would of been leaking from the hood right into the last piston holes that is why the farthest back plugs were hard top get out compared to the other ones closer to the front and then the carb was wide open with no air box protecting from anything getting into it. That thing is hit the only way to get it going is to pull the head and use lot`s of heat and lube to bust those things loose.
    3
  8. Sorry but you don't know what your talking about chrysler motors are not junk your just a idiot that don't know what your talking about at all
    3
  9. Yeah Chevy made the Spirit Of America cars in anticipation of the United States bicentennial in 1976 they had the Impala, Nova, El Camino. I always thought it was funny that they did the 1974 cars instead of the 75 or the 1976 cars but that's GM for you but I know many company's were big on America's birthday unlike today where it seems everyone hate America and wants to erase history and rewrite it the way they want it as anyway the Spirit of America cars are supposed to be rare but that's only in mint condition or all original condition still.
    3
  10. I would of loved to seen that place back in the day when it was new it would of been cool to see it then and now
    3
  11. Got some CCR on and some Hank Sr right on man got some good taste in music I must say
    3
  12. Those reindeer are awesome I love how she did the tails those are so cool
    3
  13. That's too bad about that first Suburban those early ones have a nicer look in the front end compared to the late 70's and 80's but you gotta do what you gotta do at least you got some money back from it instead of losing everything on it
    3
  14. That was awesome! I was LMAO when you were turning the prop and vinegar was shooting a far distance reminded me one time getting a engine unstuck and covered the whole side of my parents garage wall with ATF but what a score that thing is and Can't wait for part 2 and Speaking of Cleetus Mcfarland tonight's the Freedom 500 are you watching it or what and what do you think about that LS Lambo for the winner
    3
  15. That's bad ass I use to have a 1971 and a 1973 Monte Carlo the 71 had a 454 big block it was blue with black interior and the 73 I had was white with black interior that had a 350 small block till I blew it up and put a big block in it anyway that car is bad ass
    3
  16. Now that's some scrap iron if I never seen it before LOL!
    3
  17. Damn that thing is crusty it's too bad because they are a sweet car when solid the Javelin and the AMX and the AMC Machine are all 1960 Muscle cars from AMC even the Rebel was a cool car too. I use to live down the road from a AMC dealer back when I was a kid in the 1980's I use to go and check out all the cars they had there back then it was the Spirit and the Eagle all wheel drive cars at that time but there was classic AMC cars all around the place
    3
  18. It's Fred Flintstones Jeep A Yabba Dabba Do!! LOL!! It has no floor in it lol
    3
  19. That night shot at the end what is that Philly or NYC it looks cool here in Canada the only city that looks col at night and Big is Toronto but I'm a couple hour drive from that S hole and I like staying away from it now days since it's nothing like it was when I was a kid or a teen
    3
  20. yeah you gotta watch out messing with big blocks that have the back brakes locked up it's real easy to break the engine mount with all the torque they have I done that before
    3
  21. I would not go changing the oil and all that stuff until I heard the engine running. Imagine spending a boat load of money on the engine before you fire it up and then once you fire it up it has a big rod knock or something it would be a big waste of time and money that is why you should get it going before spending any money on it.
    2
  22. That truck is in very rough condition I would not spend money on that thing the box might make a good storage box but then again it has wood in it and will rot over time I think it's worth fixing up and 3 grand is too much in my opinion I think it's worth a thousand bucks tops.
    2
  23. If I was you I would clean that fuel take better then you did. I would of removed the tank and clean it really good removing the pickup/ sending unit and make sure the tank is really cleaned. If the tank is leaking Seal All is a great product to seal fuel tanks I have used it on some really rotten tanks that was leaking right around the seam and it sealed it good. The fuel filter you use is not good they leak and great at causing fires. many of classic cars have burned because of it your better of using a plastic filter as long as it's not sitting on the engine or exhaust it's a lot safer then that glass filter that are known to leak.
    2
  24. I agree everyone don't have to be a VVG This Channel is awesome I like all the awesome cars on here that Fury Wagon is awesome the Chevelle is awesome the tonka truck and the 5 ton is awesome too. There is just so many and I like the longer video's I think they are better than short ones Mortske Repair is another channel I love watching too every monday morning
    2
  25. Damn that Coronet was a RT too its too bad it was in such bad shape but it's worth restoring for someone being a RT model
    2
  26. I would not even worry about the fake pin stripe it looks great as is. I'm surprised that thing come out as good as it did.
    2
  27. Tell buddy to put some dryer sheets in the car the mice don't like the smell and will evict them it's too bad they allowed the car interior to get messed up by the mice because the interior is mint in that car and would of been if stored properly but dryer sheets will scare the bastards off
    2
  28. Stainless works has nice stainless header and they are lifetime warranty they are a little expensive or they sell a kitt that you can build yourself but you need to really tig weld them to do them right or if you don't go stainless ceramic coated headers are the next best thing and will last lot longer and keep your underhood temps down. Sandersons makes good Ceramic coated headers I had a set and they lasted me a long time and as long as you don't scrape the ground the ceramic will last a long time
    2
  29. 18 bucks for a rotor? Damn that is highway robbery. Prices for things are totally getting out of control I hope the right person get elected or the prices are going to continue to raise Trump is the man
    2
  30. You still got the Mustang in AZ too don't you? it's too bad that camper is not that great the engine in it are one of the most reliable engines and parts are easy to come by and cheap.
    2
  31. 10 seconds in the 1/4 is fast I guess that why the XR1200 is the fastest Harley
    2
  32. The car looks like it had a paint job not long ago so how much of the car is solid and how much is plastic filler and patches. That's the thng about buying a old car that has newer paint it means it could be hiding lot's of rust and stuff that you don't know about and being how old it is and where the car is from I'm sure it's hiding lot's of nasty secrets.
    2
  33. Yeah Made in Japan is a good thing it's the Made in China you gotta watch out for but there is not many things that came from Japan that was junk. They make good stuff in all things they do from knives ,electronics, cars and bikes they got that down to a science
    2
  34. That Suburban you got are one of the good ones with the barn doors on the back instead of the tailgate one's. The great thing about them is that you can get all the parts interior and exterior so you can fix them right up to be new again i'm sure if you keep it the weather stripping will be the first thing that get's replaced. I think one of them with a Cummins or a Duramax diesel would be awesome in one of those and would be able to tow anything with it too.
    2
  35. Nothing on that truck should be metric. That truck is so old Metric was not even anything back then it was all standard size
    2
  36. My old boss had a 1967 2 door Cadillac and he would make me drive it to his house all the time it was a real cruiser and it was fully loaded with everything working but it was a big barge to park. They should make everyone learn how to parallel park in one of those cars because if you could park it you be able to park anything.
    2
  37. LMAO!!! The girlfriend comes out asking how your doing and present her a hand full of crap from the bottom of the door LOL!! That's something I would do LOL!
    2
  38. Chris is a licensed mechanic not one of those shade tree mechanic that could be why
    2
  39. Damn the floors are really good in that car for it's age and what part of the Country it's in is a big surprise that thing is not bad at all the interior is really nice too once all the mold was cleaned off. Someone painted the interior black but other then that the interior is really great shape too. You really scored a nice solid car man congrats.
    2
  40. Ole Mortske and Duff would love that truck. He's in love with those square body trucks. lol!
    2
  41. LMFAO!! That is the funnyiest shit I have seen in a while out on the jetski in winter and hopping on a snowberg and having a fire and a beer LOL! People that see you must think your on dope or something LOL!
    2
  42.  @crforfreedom7407  What do you mean it runs and moves it's not new but it works and for someone that likes old equipment that is a diamond in the rough. That engine fired right up all it needs is some TLC that is all.
    2
  43. she has a 160 net HP at 3800 RPM LOL! she is no screamer to put it mildly. It's almost like a diesel engine makes all it's power at a low RPM but those old N600 Fords were not for speed when they have real low gearing to pull. I bet that truck tops out at 50 mph maybe 60 if you really push it but that's about it.
    2
  44. I'm loving these road trip video's it's awesome and I get to see parts of the Country I don't see everyday so that's cool. Glad the old Elco is still running
    2
  45. I wish i could find a deal like that but always too busy to find the deals and by then the flippers snag it up
    2
  46. I hate when people cut up the video's and turn one video into a month with 20 minutes an episode. Junkyard Digs is bad for that stuff I would rather have it long like this only NNSNH, Mortske Repair and Sleeper Dude are the only ones that keep them long like this and I like it.
    2
  47. You should of popped a main cap and see if the bearings are good or not
    2
  48. A awesome spray to stop rust is fluid film and it smells good too but it s a great undercoating to prevent rust
    2
  49. The more door nova LOL! I never liked those Nova's I always thought they had a ugly body. The Chevy Nova, Pontiac Phoenix, Oldsmobile Omega and Buick Skylark of the late 70's did not have a great look at all in my opinion
    2
  50. Yeah the old school traction bars work if you have them set up right but the caltracs are so much better I have that on my truck and my car and I don't get no wheel hop or anything they plant the tires and goes they are so much better than the old bump stop bars
    2
  51. I would be hitting up the classic car bone yards to find some parts for that thing because they are getting to be rare nowdays and you being in AZ they have the best classic car junk yards in the Country
    2
  52. Speaking of that 1960 Fury Cold war motors restored one of those on his channel its a nice looking car and you should check his straight 8 showdown between a 1953 Packard Clipper and a 1950 Buick Riviera they both were seized and in horrible shape but its awesome anyway here is a link to the straight 8 showdown its in a few chapters https://www.youtube.com/watch?v=vOBBU6h8BFU&list=PL3naAFlKUN6dm9YFkzphRMGVC4gd7E30A
    2
  53. I find carb cleaner or Acetone really loosens the old gaskets using stripper and meth chloride is extreme stuff to use lol but I guess if it works but that stuff is a little extreme to remove gaskets in my pinion lol
    2
  54. I had a couple 3 wheeler's back in the day my first one was a yellow Suzuki 125 and then I had a Honda big red 250 with the rack in the front and back they were fun but I liked 2 stroke dirt bikes the best and old Yamaha snowmobiles are my faves
    2
  55. I have seen old sears battery's they are from the 80's as far as i know anyway. They could of made them longer but I don't know but I bet that car has been sitting since the 80's
    2
  56. That's some cool mods you did to that thing the drive belt is a good idea. I have snowmobiles and they have a spot for a extra drive belt so I'm surprised that thing would not have one too. I always carry extra spark plug too because you never know
    2
  57. Man that 383 sounds good that cam that's in that thing is nice and lopey. I love it that car is so awesome
    2
  58. You should of got that Buick running again too that is a nice car also but that Eldorado turned out great
    2
  59. 1975 El Camino is like the car you had the white one or the car Cleetus got for sick Week that they call lumber jack. Chris if you did not see Cleetus sick week episodes you gotta check it out it's funny
    2
  60. Your friend enjoys all the blow by LMAO!! I almost pissed my self laughing when he asked if the breather tube on the valve cover was the exashast LOL!!
    2
  61. A great channel to watch about the Detroit diesels is the old2stroker channel here is a link to it if you wanna check it out https://www.youtube.com/watch?v=veyQa5crUBA
    2
  62. I have not used a bumper jack in a long time I use to play with them and jack up cars when I was a kid but now I use a hydraulic jack it's a lot safer then the bumper jack but I like those better then those scissor jacks
    2
  63. That's the thing about southern cars they are rust free but the interiors are crispy. you have to take a rust free car from the south and use the non crispy interiors from the north east and then you got a great car inside and out
    2
  64. Yeah it's too bad not much is made in the USA anymore and it seems there is a side of the government that wants to make sure nothing get's made in the USA anymore so we got to live with everything made in china so collecting them old tools are great they were quality made and to last a lifetime.
    2
  65. That wagon sounds bad ass that old 383 is awesome one of my favorite engines of the B family and then the 440 is my favorite of the RB family that and the 426 Hemi that is.
    2
  66. Don't even bother power washing it and fixing it just a bit just get the thing running and put it on the water. well you should keep that engine or sell it to someone that will appreciate it before you let it sink somewhere
    2
  67. I love your video's I have already watched them a few times I just wish there was more lol!
    2
  68. I use to ride those spring rockers when I was young the park down the street from my house had them and use to ride them that and the merry go round. I was born in 1979 and we had the best stuff as kids sure the stuff could hurt you but that's all part of growing up it was so much better then the plastic junk they have today. The playgrounds are so boring today compared to the stuff I had as a kid.
    2
  69. So you are a mechanic in your day job?
    2
  70. That's the good thing about old cars there is not many things that can go wrong to stop you in your tracks. Now if it was a computer controlled car if you don't have the proper equipment your screwed unless you get it to a garage but on the old cars you can diagnose everything on the side of the road with hardly any tools
    2
  71. Use pine sol in that ultrasonic cleaner if you want to see real results.It will take a carb and turn it to brand new. It's works great for me. Chem dip will work to but Pine Solis so much cheaper and it all natural cleaner. I have never tried it but a friend of mine said vinegar works good too
    2
  72. Just looking at the battery now you know why most cars have the battery trays and steel around the tray rotted away and that is because of the battery
    2
  73. I don't know why automakers don't put stainless steel screws in for the License plate screws on my cars I always put stainless in instead of the steel screws that rust and they start staining the plate and the paint on the car. I have seen a few cars have major rust stains from the screws and it looks like total crap when it's easy to go buy some stainless screws and they will last forever and not rust all over the plate and paint of the car.
    2
  74. That sailboat by the way is the Mayflower going to Plymouth Rock anyway what a classic car I'm a sucker for the old cars like that and it's the same age as my Parents it's too bad I live in Canada because I would buy that car right up but it's a little far for me and dealing with the customs is something I don't really want to do again unless it's a car that I really want but it's a cool car none the less plus I want to get something a little older then a 1954
    2
  75. That's cool that car is clean for it's age and the engine is real healthy being the PSI is at 150 to 140. I was thinking of taking a plane out west and bringing back a nice car for myself since I live in the rust belt and everything here is rusty. So going there getting a good car and taking a vacation at the same time would be cool to do now just to find a good time I can get off working in order to make that trip is the biggest issue I am going to have.
    2
  76. That noise coming from the wrecker could it be the hanger bearing starting to go? That's my first guess of what it is because it sounds like it a bit but it has been a while since I had one go on me.
    2
  77. Really people had to find out common sense did not clue them in LOL Anyway that's why you go get in a head on with anything and everything will be alright. That van was a daily driver since new and it has made it with some bumps and dents but nothing too bad.
    2
  78. What a sweet ride the interior is moldy but with some good cleaning you can get them seats and that all cleaned up . I love the dark tinted windows too. What a score you got. Make sure you go over the sub frame real well and make sure it's solid and not rotted out anyway Nice ride
    2
  79. Damn you guys write that tune or what and Jen can sing good man she is talented damn!
    2
  80. That Galaxy radio is a good one I use to be into CB and those are good they have more wattage then what is legal. On AM legal is 4 watts and on side band it's 12 watts but that radio you can turn it up and get 10 or 12 watts on am and on side band you can get 50 to 90 watts plus get a bunch of extra channels and half channels. it really a 10 meter radio but lot of CB guys use it for shooting skip that one is a older one and means it's a good one. you need to test that radio out but you have to have a cb anntenna hooked to it and you need to set the swr on it so you don't blow the tranmit finals out of it but if it works you can get some good money for it. here is a guy with he same radio https://www.youtube.com/watch?v=BKQxeEGxhvg
    2
  81. You did not even need the trailer it had a tow bar already on the thing LOL!! That would of good all the wheels rolling good by the time you got it home
    2
  82. Cars sitting around and under trees do not last long they rot out so fast due to the leaves sitting on the car and holding and collecting all the water and moisture and they rot so fast that's why I stay away from cars sitting around trees not to mention all the bugs they attract too
    2
  83. Yeah the weather did not take long to turn it went from a 60 degree day to cold and snowing the next but I guess that's what we get when we have 60 to 70 degree days in the beginning of November anyway it was good while it lasted but now the crap weather begins . It's going to take me a while to get use to the cold weather and it will be alright.
    2
  84. That early 70s LTD sounds cool reminds me of the moonshiner car off the movie White Lightning with Burt Reynolds
    1
  85. All 350's had a 2bbl carb if you wanted a 4bbl you had to get a 400 but many of them came with a 2bbl too. you gotta remember the early 70's the emissions and gas crunch killed the performance in all the engines. Chrysler was the only one that held out till 1972 to kill the power but GM and Ford started killing the power in 1971 and every year after it got worst and worst with lower compression and smog killing devices.
    1
  86. The good old oil bath oil filters they used them in big trucks into the 1970ès I know my grandfathers Dodge grain hauler truck had oil bath filter too. They work real good back when roads were all dirt a paper element would clog right up quick but the oil bath they filter the dirt great and you don't have to worry about a clogged filter
    1
  87. well that sucks that you did not try to get it going
    1
  88. That tool is badass there is nothing like old school tools. you should check out Strongs garage and see all the tools they have for Modal T`s and Modal A Fords. Here isa good link with some old tools they scored https://www.youtube.com/watch?v=dll0CbCxsQ8
    1
  89. That thing had to of been sitting since 76 the amount of rot and everything on it I bet 76 was the last time that thing saw the road it very well could of ran after that and it's cool on how little needed to be done to get it running. No stuck valves or anything it just fired right up like a champ.
    1
  90. I use to load the back of a Aerostar van up with rads from central air units and out of AC units and cash it in and made good money that was back in the mid 90's the price of copper and copper alum mixed has gone up since back then. At he time #1 copper was a buck 25 a pound and I was making a great chunk of cash and the places were giving me the old Central air units for free now most places take it in themselves because they get good coin for it.
    1
  91. I was big into demo derby's back in the late 90's the cars I would use is the 1977 to the 1990 Impala Caprice Classics. I had a bunch of them it was great because the police stopped using them in the early 90's then they would be used as taxi cabs or daily drivers then they would go to scrap and that is when I would by them up my friends old man had a junk yard and if any came in I would give him $300 for each car. I* won many heats with them cars. They were the most popular car for the demo's at the time.
    1
  92. My old 1985 square body had those vents pulls under the dash. They come on the trucks without AC I think anyway they work good on those days you don't want the wind noise from the window down and want some fresh air from outside
    1
  93. U haul usually have their own engines built by Ford the 79 U haul Zipties got had a 330CI now if you know Ford never made one well they did but only for the U haul trucks so it could be a 330 https://www.youtube.com/watch?v=8NbXm3V-_nM&t=3106s
    1
  94. I was just watching Junkyard Digs and he had a boat on his channel that he got for free and it had a 4 banger in it too but it needed some work done on it.
    1
  95. That rollback needs a cummings find a 24 valve 5.9 for that thing you should check out JH Diesels 77 Chevy he had a 24 Valve 5.9 out of his burnout truck but he blew it up so he put a 6.7 Cummings in it the thing is a sweet ride
    1
  96. Damn that a sweet truck I love the looks of those old Mack Trucks they are cool looking
    1
  97. Hey Chris check this video out about a 09 Honda accord if you have some spare time https://www.youtube.com/watch?v=urd8S7eo0rc
    1
  98. I am really surprised you did not bend push rods when turning it over after sitting for that long valves are 99% of the time stuck. Somebody must of been running that car within that time for the valves not to be stuck. That's amazing
    1
  99. Hey Chris what ever happen to that car did you sell it or still have it because that car is a sweet car one of the best you acquired since doing the video's in my opinion and worth the most too the Fury wagon is awesome too but that chevelle being what it is with a big block has the most value and the most collectible cars and out of the many Chevelles I have seen you just don't see as many 71 as you do the 72 cars.
    1
  100. That wetbike is nasty I don't know how you have a stomach for that but I could just imagine the smell of that thing
    1
  101. Hey you should check out the car Steve Morris is giving away a sweet 1980 Malibu with a big block twin torqstorm supercharger pushing a 1000 hp with a bunch of stuff to go on a drag and drive plus snap on 1000 dollar tool deal plus 10 grand cash
    1
  102. Was the valve bent or was it just stuck open because I have seen valves get stuck open from sitting and taking a hammer to the valve. A bent valve you not going to be able to fix it without replacing it.
    1
  103. That caddy looks to be not bad many of those cars have the plastic between the rear bumper and the 1/4 panel gone and it looks like crap but that car had them still it needs a real good cleaning inside and out
    1
  104. That's a Base V8 in 67 you could get the base 6 or base V8 would of been a 289 2bbl challenger and 3 spd manual trans it has 200hp 282tq and a 4 spd or automatic would of been Optional and then they had the 289 Challenger special that would of had 225 hp and 305 tq
    1
  105. That's the thing with them desert cars they have no rust but the interior are burnt to a crisp in them and just the looks of that Dash you can tell the sun has cooked it real good.
    1
  106. That's a awesome little truck I could have lot's of fun with that thing
    1
  107. With that engine being so old the whole block is rusting from the inside out. I bet some time in it's life it was ran with straight water for a long period of time and once it's starts to rust it's hard to stop unless you pull it and run it through the acid bath but you have to tear the whole engine down for that but just flush it as much as you can and maybe run some CLR through the block and allow it to eat the rust away to get rid of most of the rust in the block.
    1
  108. That access in the floor is the back foot wells of the backseat on a station wagon since El Camino's used the station wagon body and frame and instead of using different floor they just covered the floor wells up with a coverall the El Camino's had that
    1
  109. Man you really need to paint that box that yellow looks like hell with the red cab on the truck. It will not take long to sand it down mask off the stuff and mix up some paint and spray that thing
    1
  110. The water should be coming out of the prop for the exhaust the bellows looks to be gone or it came unattached because the water is supposed to be coming from the center of the prop
    1
  111. There is this stuff called Seal All works awesome on fuel tanks. I have patched many fuel tanks with seal all and it works great
    1
  112. Man all that damn plastic people are so damn lazy it's pathetic that no one can toss their bottles into recycle. I have a store down the street and in front it has a bus stop with a big trash can and 99% of the trash ends up in the bus shelter instead of in the trash can. It annoys the hell out of me when someone will toss trash on the ground when a trash can is 3 or 4 feet away.
    1
  113. I would keep the 289 heads because if the valves and ports are the same as the 302 HO heads then you will be losing with the higher combustion and I would not worry about the non harden seats too much there is always a lead substitute that you can add to the fuel but I have seen heads run todays fuel and last a long time without harden seats. The engine would need a rebuild before the valves start sinking in the head.
    1
  114. I had one of those engines on a boat I had and it ended up shearing the gear on the distributor that killed me in my tracks and ended up being towed back to shore because I was lake Erie about 6 miles from shore. I ended up selling it
    1
  115. Rebuilt engines that sit are not good for starting 30 years later because they are so tight the old high mile engines that are nice and loose those are the good ones that will usually not be stuck and that will run most of the time.
    1
  116. I like the rallies on that car it's too bad he don't have the center caps for them and those slapper bars are good if they are set right and those are not that is why he got all that wheel hop at the end if they were set up to work the slapper bars would of prevented that.
    1
  117. WOW that car is very very clean what a cool find. I am not big into Cadillac but that's a 2 door coupe de ville that looks like it's got very little miles on it. What a car
    1
  118. I bet the tank is dirty inside and that is why you got hard starting with the new fuel in there it's cleaning off the walls of the tank and it's sucking it all up
    1
  119. Love the Bike videos because I don't have much experience with street bikes now with 2 stroke dirt bikes I am but have never worked on a street bike
    1
  120. Man I wish i lived closer to you I would of bought that Jet Star from you for sure that jet bike I have no use for but glad someone got them that will do something with them especially the Jet star
    1
  121. It don't need a full restoration I would drive the snot out of it like it is and I would want a Matte gun metal grey or a dark grey that thing would look so good but I think the red is cool too but red is a heat score color the cops love pulling over red cars for some reason
    1
  122. The needle valve is stuck open on the carb that is why it keeps shutting off you should tap the carb to get the needle valve to close fuel keeps dumping into the engine flooding it out
    1
  123. You need to watch Cold War Motors Straight 8 Showdown it has many parts but it`s awesome that`s for sure https://www.youtube.com/playlist?list=PL3naAFlKUN6dm9YFkzphRMGVC4gd7E30A
    1
  124. That's a nice car and you can get all the replacement floor pans and everything to restore that car. It has the nice dash in it instead of the sweep needle gauge many came with. I wonder if it is a real SS model and love it has a big block in it that sets the car off just right.
    1
  125. Poor Jen has to clean that rusty old heap LOL She is a trooper
    1
  126. You can hang that sign of your daughters on the wall in her room by the looks of it. That is cool
    1
  127. Damn that engine is new I bet they put that in there before the car was took off the road I could tell by the cross hatch that engine was new if I was you I would keep that Clevland that's a great engine one of Fords best performance engines up there with the 428 and 429
    1
  128. Those engines came with 800CFM carbs on them so the carb is not too big I have had issues with vacuum secondaries myself with he holly you should do a reading of how much vacuum your pulling on the engine and make sure there is no vac at idle and vac with throttle
    1
  129. Check out this mint 1995 Dodge 12 valve at Watch Wes Work the thing is clean from being in the rust belt https://www.youtube.com/watch?v=nMgJL48GMaw&t=168s
    1
  130. You should get a hold of Diesel creek he loves those old machines and he has lot's of land to keep them plus you guys live in the same state but I think he is closer to Pittsburgh but he loves all that stuff and he has a low boy and a truck to haul that stuff with https://www.youtube.com/c/DieselCreek
    1
  131. I think the wrecker is awesome I like it. Mortske Repair just bought a old Ford tow truck but it don't have the wheel lift it's just has the sling
    1
  132. If you want something cheap to clean the carb try some Pine Sol that stuff cleans carbs real good and you don`t have to put it full strength
    1
  133. Yeah your not going to find a car of that vintage as the Savoy in that condition. That car is in great shape the new owner is getting a nice car I would of bought that thing if I knew it was for sale and would of paid a shipper to bring it to me but I'm really looking for something older like from the 30's
    1
  134. That boat is awesome they were built in the early 90's and they are quick on the water my cousin has one with a Susuki 2 stoke engine they come in 13 foot and 16 foot and they are cool and collectible. That thing is worth fixing up I hear guys are putting newer bigger engines into them to making them into little rockets on the water anyway what a great find.
    1
  135. Speaking of Mustangs Street Racing Channel just picked up a sweet 1979 Fox Body Indy Pace Car has a built SBF with a single turbo that he will be giving away soon you gotta check it out https://www.youtube.com/watch?v=Y7bRBgS02J4
    1
  136. You can turn that AC Compressor into a Air compressor if you wanted
    1
  137. That's a cool plymouth the guy did lot's of work and parts into it I hope she gets good money for that thing because all the parts on that thing is not cheap and them Olds 455's are not cheap anymore to get the Buick 455 are even more. If that was my car I would be 20 thousand all day for that car you can find the same cars using other car parts going for about the same and that car has more aftermarket parts and new stuff then used car parts like it is on other cars.
    1
  138. You should run your heater too make sure your heater core is not slowly leaking I had that issue before and caught the heater core before it totally started leaking like crazy
    1
  139. The aerostar van i had was the manual 5 spd and use to drive that thing everywhere load it up with friends and go booze cruising it was lot's of fun through the 90's even impregnated my girl in that van lol
    1
  140. How are the drones in your area are they buzzing around or are they not around your area
    1
  141. What's up with that 55 Chevy that's there is that thing any good or what
    1
  142. Some coils don't require a resistor and others do a GM coil should not need a resistor but the oil filled coils do need a resistor I'm pretty sure
    1
  143. I use to have long hair for the longest time and working on cars and stuff is no good so I shaved my head and since then I have kept it short I tried to grow it back once but did not get to far before I shaved it off again now I just buzz it every 6 months or so it's so much better don't have to brush it and go through shampoo washing it now I can wake up take a shower and am off don't have to brush it every morning the one thing I miss is the ladies always loved playing with it that's the only thing I miss about long hair.
    1
  144. Hell yeah I love the fix on the go stuff it keeps us on our tows to see what is going to break and will it leave you stranded and getting to see the south west of the Country at the same time is awesome I love it.
    1
  145. Vice grip Garage did one of those Torino Elites If I recall it had a 351 modified or 400 in it and it was seized anyway he got it going and drove it home from North Dakota to Minneapolis anyway you crazy buying a old Ford in Vegas and driving it back to PA LOL! Reminds me of that guy and his Friends went to AZ to buy a pinto with a 302 V8 and drive it back to Boston area it was a crazy adventure they had with lot's of overheating.
    1
  146. Man you should make a project out of that thing and do a bunch of chapter fixing it up do you have the ownership for it the thing is really simple being it's all flat panels you don't have to be a body guy to cut the rot out and weld new stuff in .
    1
  147. It a low rider or is the earth sucking that car up I bet the bottom of that car is super thin if there is anything left. that car has been sitting in that garage for many decadesI am going to guess since the 70's at least
    1
  148. Stainless works has nice stainless header and they are lifetime warranty they are a little expensive or they sell a kitt that you can build yourself but you need to really tig weld them to do them right I had a set of ceramic coated big block headers that would fit the chevelle but sold them last year or the year before to a guy that was going to put them on his big block chevy truck or I would of gave you a sweet deal on them
    1
  149. They got the Kingston Trio and Doris Day records that's neat I knew Doris Day was a movie star but did not know she sung but her son Terry Melcher was a producer so I could see her getting into singing. The kingston Trio was a folk group the only song I know of them is the Tom Dooley song from when I was a kid.
    1
  150. Damn what a shit show that was. i would of got that u haul running and moving and moved it to a good spot to load the thing. I'm not going to lie but I was hoping for some action there with the big mouth that would of been lots of fun LOL!! Anyway the scrap iron has been moved but what a job that was to get it there. You would of got more money and less headache scrapping the thing then selling it or at least that's what I would of done.
    1
  151. I had 26 foot bayliner with the Volvo penta inboard outboard V6 had it for a bunch of years never a issue with it and top speed was 40 on the speedo on the boat anyway
    1
  152. Yeah the 396 was known as the Rat engine kind of like the 426 Hemi was known as the Elephant
    1
  153. when they shut down they are wide open you have to pull the valve covers in order to make sure the rack is free if it's stuck then it will be wide open and that is the issue the only way to make sure is to remove the valve cover and make sure the rack is free for the injectors
    1
  154. That driveshaft is called a torque tube many older cars had them some right into the 60's even corvettes still use them or did before the moved the engine the first time I messed with one was when I was removing a trans out of a 1966 AMC Rambler Classic the funny thing with that car is it did not have any cooling lines to it too it was a weird thing but since then I have messed with the torque tube many times even rebuild them too.
    1
  155. That car will suck back the fuel real good and you got to run premium fuel or you will get the spark knock too
    1
  156. That wire in the windshield is the AM antenna all GM had them like that back in the early 70's
    1
  157. you should not use silicone spray or lube on those injector O rings use petroleum jelly or oil but never use silicone lube on them O rings it's not good for them at all.
    1
  158. Yeah it's overheating I'm sure because the cooling system is full of trash and needs to be flushed out
    1
  159. I got a 1994 RMX 250 had it since it was new still runs great along with all the other dirt bikes I have I even have a 1979 MX-5 if you know what that is itès a old CanAm 250 it's a old racing bike that was my uncles motocross bike that I have now itès a real mule if you have never rode one it really kicks anyway got a Kx80 and a YZ80
    1
  160. Buddy's truck is awesome i'm a sucker for anything with a flat head and that being a flathead V8 with Edelbrock speed parts on it it so cool that 460 sounds like it is a healthy engine and the C6 trans works too so I'm sure he will get lot's of life out of it for sure.
    1
  161. Is that the 3 mile island cooling stack that's in the background or is that a different power plant
    1
  162. Love the old tombstone welder I got one myself is a arc welder and works great
    1
  163. Right on you still got the ole beast I was wondering if you sold it or what since it was not seen anymore anyway that car is awesome.
    1
  164. The issue with turning the engine over with the starter is that if there are any stuck valves it's going to bend pushrods and may do other issues too
    1
  165. I love the color and the Interior too bad it's a coupe and not a fastback but it's still a cool car and I am not a big mustang fan I use to be but finding so many junk ones have turned me away from them. Check out this 67 Mustang buddy bought for a bunch of money https://www.youtube.com/watch?v=B6vmiXBpvOM&t=49s
    1
  166. I could see the rocker on the first valve is not moving at all it's too bad you don't have another person or use your phone or camera to check to see if all the rockers are moving instead of thinking everything is good when it's really not good.
    1
  167. Put a 300hp engine out of a jetski that boat would rock and roll That boat is awesome I would love to get one like it but they are hard to find
    1
  168. Those are 1965-66 Impala SS hubcaps. They may be worth a bit of money depending on the shape they are in
    1
  169. I would just use used motor oil in that thing it's better then what was in it. I have used motor oil I keep just for that purpose it's synthetic oil and I change my oil on the regular and always early so it still has lot's of life left I use it in my mower and in cars that need oil that I want to hear running for cores it's better then spending money on new oil
    1
  170. Chris get a load of this mustang someone paid damn near 40 g's for. https://www.youtube.com/watch?v=CmhYRzYR2SY
    1
  171. I was going say is that your brother or something because you guys look like twins damn near except he has longer hair LOL!
    1
  172. Those seats should be factory unless they got them done in factory covers but that is 100% factory and how I know is my friend has a with the Brougham Décor and the seats are the same as that one but different color and his has a few cracks in the seats
    1
  173. You need to put some horns on the front and you will have a Boss Hog Cadillac after them Duke boys and uncle Jessie
    1
  174. Another kick ass video like always. Man I wish I could go and go buy a car from somewhere far away and drive it back home I'm going to have to take a week off work sometime and do something like that because it looks like lot's of fun and nothing better then getting away from the house and out on a vacation for a week or so.
    1
  175. That's a nice car I'm not a big convertible guy but the car is cool. I almost bought a 1972 GTO a few years back and it had the same front end with the same hood it had a 455 HO in it and the thing needed work but it was sweet. That Lemans has a GTO hood on it the Lemans never came with the "Ram Air" hood only the GTO did but that car would be easy to turn into a GTO clone all you need is a 400 or 455 the grille is from a GTO too so you have a head start to turn it into a GTO clone
    1
  176. Don't let Mortske Repair see you use that flex universal hose LOL!! He hates those things and he does have a good point on why he hates them too
    1
  177. Gotta protect the rad and back tires but if you take out your rad your done I use to put a few AC rads in front of the rad to protect it but it all depends on the rules every place has the same but different rules on what you can and can't do but there was always guys trying to get away with things if they could and if you can hide it then your good.
    1
  178. Man that has got to suck that happened but it was cool you saved the truck. I thought it would of been cooked with everything running on electronics
    1
  179. I have that set of Disney's wonderful world of Knowledge my parents got that for me when I was a kid
    1
  180. Good way to break that engine in a little red line to seat them bearings and rings LOL
    1
  181. That car is clean for being in the rust belt. Looks like there is not a spec of rust on the thing the only rust came from the tail pipe LMAO!!! It was rust brown that came outta there
    1
  182. A rebuilt engine that has been sitting for years is no good because everything is tight inside and with is sitting like that will give more issues when getting it going. I would rather have a nice broke in engine that is a little loose that way it won't be spinning bearings or breaking rings and stuff when starting after sitting a long time.
    1
  183. That car would make a great demo. Have you ever seen the movie called The Car from 1977 it use to be a lincoln
    1
  184. Damn Thieves have ruined it for us honest people once again and that pisses me off since the thieves have been stealing cats off non junk cars made all the scrap yards stop buying cats of scrappers now. leave it to the thieves to screw everything up for the honest guys and speaking of thieves take a look at what thieves did to this guys car https://www.youtube.com/watch?v=dK0KvO4xRjc&ab_channel=Nobody%27sShow
    1
  185. A clogged up rad, not running coolant, the timing being too far advance are all things that can make the engine overheat. I'm sure that radiator is plugged right up being it's a original rad and was filled with junk plus I find running straight water in them old engines makes them overheat if you going to run straight water get some water wetter or something to mix with it or just coolant will make a difference
    1
  186. Iuse finishing nails with the big heads on them they fit perfect in the brake line then just put the line back on the wheel cylinder and it will block the fluid from coming out but your way is great to
    1
  187. I bought a car once that they said the cam was junk and found out whoever was playing with it cranked the rockers all the way down. I'm surprised the valves did not slap the pistons but then I found out the pushrods were all too short so whoever it was did not know what the hell they were doing with the valve train and in the very end there was only two dead lifters and the cam was ok but I replaced everything anyway
    1
  188. I just slap seal all on the leaky fuel tank I've used it on a few tanks and it works good but for sure welding or brazing it is better
    1
  189. Damn that's gotta suck man that's what happen with me a few years ago and my ex she dumped me for another guy and he ended up cheating on her right away and came crying back but I said sorry about your luck and have been single ever since. now I have a couple friends with benefits and everything is great and stress free.
    1
  190.  @bloodybones63  That's true at least he ain't wasting his time on a B that never loved him and now can find someone that will.
    1
  191. I'm thinking it's a perkins engine many of them things have perkins diesels in them
    1
  192. Do you have the keys for the doors on the box?
    1
  193. with those holly carbs once it has sat a while you should pop the air cleaner off and once the fuel bowls are full look to see if fuel is dumping because they will have sticky needle valves from sitting another way to know if fuel is dumping into the engine is it will run like a bag of crap and not idle at all
    1
  194. That poor car I'm sure that engine will be cooked by this summer is over being a tired old 57 year old engine and all the pounding your putting on it and the overheating it won't be long till it will be DOA
    1
  195. I bet Jen wants to sell her Honda now to cruise around in the old custom deluxe. She can tow them illegally parked cars. LMAO!! Just joking
    1
  196. If I had that thing I would fix it the body is all flat it's simple to cut the rust out and weld in some patches and the frame is a siple fix too if it's not that bad and if it's bad just use the old frame to build a new one out of new steel
    1
  197. That car is really nice for the year it's too bad the mice got into it but like I said put a bunch of dryer sheets all over in that car and they will not like it at all
    1
  198. Make a good cruiser its all rotten did you not see that thing LOL!
    1
  199. What a shame the rim is all rotted out but at lest the center cap is there I have seen many of those rims though the years and they were always missing the caps but it should be easy to find another rim to match the rest. That car is cool too bad the mice got init and wrecked the place like always. They are little bastards
    1
  200. A song to go with the car ;) https://www.youtube.com/watch?v=b9TAqNPktyw
    1
  201. Yeah that's The 5th dimension Age of Aquarius/ Let the sunshine in. https://www.youtube.com/watch?v=vbCH5lnZ6sA It's a great old 60's song my old man listen to this stuff when I was growing up
    1
  202. That rod for the fuel pump is easy to keep up there is the bolt that is on the front of the engine right by the pump you take that bolt out and stick a screw driver in to hold the rod back while putting the new fuel pump on then take the the screw driver out and put the bolt back in. That bolt is only there to keep that hole blocked it's a short bolt that holds nothing it's only there to block the hole to access the fuel pump rod .
    1
  203. Another youtuber has a 1965 Fury 3 wagon I thought it was yours but this one is a Fury 3 and it had he 318 in real good condition and great interior too https://www.youtube.com/watch?v=opYmcvJkxZM&t=208s
    1
  204. I use to have one of those grand marquis it had a 5.0 in it and I paid 500 bucks for it and used it as a winter beater it was fun use to take out street signs and play bump and run with it with my friends oldsmobile regency it was such a fun car to beat on and drove it for 5 or 6 winters and went all over in it. The best $500 winter beater I ever had. My friends called it the war wagon because of the dents and the way I drove it plus it was off the Indian reservation LOL!
    1
  205. I got lucky with many of my specialty tools the garage I was apprenticing at there was a older guy that me and him got along real good and he was retiring soon so he gave me a awesome deal on many of his tools that he was not going to use once he retires so I got all made in the USA stuff that is the older stuff he got most of it in the 70's early 80's when tools were all still made in the USA or Canada so it was awesome of the guy to do that and I will never get rid of them even if I never use some of the stuff because if I sell or give something away will be the day I need it I even got a old school dwell meters and all the gadgets for the old conventional ignition system. I hardly use it but I have it if i ever need it and it's all top of the line stuff too.
    1
  206. I bet buddy was happy you pushed all his dirt off the edge LOL! some good clean top soil to play construction with LOL!
    1
  207. Before I know what I know now I use to use Fram filters all the time I still buy their air filter but don't buy the oil filter anymore unless the engine is old but I don't use them on my good stuff
    1
  208. No way I was up all night watching all the old episodes and I just noticed this new one ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
    1
  209. Rminds of the song from Janis Joplin Oh lord won't you buy me a Mercedes Benz https://www.youtube.com/watch?v=Qev-i9-VKlY
    1
  210. I would just spray some red primer on those spots and hit it with some red rattle can paint it will be better then leaving it exposed metal because it will rust more
    1
  211. Only thing I don't like about the engine it's a front sump with a OE oil pan. Not that good for high acceleration with no baffles in the pan. I would upgrade the oil pan other then that not to bad Nodler Iron crank is not the best but it's better than a cast crank remember to put 94 octane fuel in the thing since it is 10:1 compression don't want any spark knock lol! not bad for a 8 grand engine with Dart heads and forged rods and pistons
    1
  212. I would not run it with old fuel I have seen old fuel stick the valves right up it's better to run fresh fuel from a external source be better safe than sorry. The worst thing to have is stuck valves all gummed up that have to be tore off and rebuilt sucks if you don't need to.
    1
  213. Man I would keep that engine if I was you that's a high performance cleveland engine and th thing looks like it's new with that cross hatching in the cylinders. drop that in your 67 it would be one badass machine i'm telling you guy rebuild them heads and you got a sweet setup better then the 302 by far
    1
  214. I bet the engine would sound better with more oil in it. I had a old ford Y block that if it got down on oil the thing would get noisy but add oil to the full or little over and the thing would run great with no ticks from the valve train I bet that truck would do the same
    1
  215. The same time the wrecker games was on Merlins Old School Garage had his Bday Party out in Glamis in Cali lot's of sand rails
    1
  216. Being that it's a propane burner I bet it's the valves or even cracks in the head around the valves propane engines are famous for that because of the temp propane burns at. I bet the head will need a rebuild to get the compression back up to normal but it should still run as it is but the life of it working is a little low
    1
  217. It's always a good idea to go through it more then just get it running and go on a drive because you may end up walking home or at least bring a set of tools with you just in case you need them.
    1
  218. You were Lake Havasu that's cool that's where Merlin Johnson lives. If you don't know who he is check out Merlins old school garage https://www.youtube.com/channel/UCCEKcrNldtHYshuMipWjqmw
    1
  219. good thing that line broke because you would of destroyed the rollback and the truck with that truck on it. that bed is only good up to 8000 and that truck has got to be pushing 10 or more
    1
  220. You should get a 5.3 LS for that jeep that thing would be awesome with a 5.3 LS my friend put a 6.0 in his in that thing is a beast he races it off road and does lot's of off road thing with it and it being fuel injected the thing will run climbing steep hills and on major angles. With the carb it would alway stall out and just be a pain but all you need is a open computer and wiring out of a truck to put the LS in to that jeep and you will have good gas mileage and good power more then some old AMC engine will ever do without spending a heap of cash doing it.
    1
  221. I'm surprised your girl got in the car with all the mold of the door skins. You gotta get some mean green or some cleaner to disinfect and clean the car up
    1
  222. I noticed the speedo even works on the old bugger LOL!! I would go buy some sheet metal and slap a floor in that thing and it would be a great off road truck
    1
  223. You should check out Steve Morris Race Engines he has a awesome shop and he has a couple CNC machines that he is making billet blocks and heads he has two different engines the SMX that is a big block chevy with some fixes for better power and reliability and the SML is a better LS engine that can take a bunch of boost
    1
  224. You need to invest in a paint gun to do big stuff like that and it's so much cheaper then rattle can they have some good stuff at harbour freight for less then 20 bucks up to $30 and buy a can of paint with some reducer and go to town so much cheaper better and easy on the finger
    1