Comments by "Jkauppa" (@Jkauppa) on "saveitforparts" channel.

  1. if you build your own track, line the iron/steel tracks with copper, and put linear alternating magnets on the car alongside with wheels/skates, it will float while moving but land/stick down when not moving
    3
  2. do a diy microwave radar
    2
  3. I guess you could just use linear permanent ac magnet skates on normal train tracks, to levitate
    2
  4. well you did not learn anything useful, you learned uni/grad/whatever, to bow to people, to go to school, some random information
    1
  5. use wifi router as the wifi radar signal, at 2.5GHz and 5GHz bands, maybe 6GHz
    1
  6. standards clutter is against k.i.s.s. principle
    1
  7. libs are mostly clutter against simple code, its like dressing a cake to look pleasing to some people, but not more usable, maybe later
    1
  8. let them clone their own reps, and have their own clean versions, not making the simple versions complex
    1
  9. if you dont understand your code, its bad, no matter how much the master code writers recommend such practice, not beneficial, to get bogged down by nonsense people's conventions
    1
  10. they try to push conventions that are not compatible with you onto you, throw them away, no matter how helpful they try/claim to be
    1
  11. its like learning to run before walking (basic code vs form nonsense)
    1
  12. you are trying to get something working vs design philosophy
    1
  13. and even worse, if some people without seeing push some bugs on you, non-working code, filled with internet trust-me-bro code
    1
  14. maybe dont trust internet
    1
  15. that includes me
    1
  16. why not continuous motion radar recording
    1
  17. then you dont have the nudge, but continuous spin data
    1
  18. use the timers as samplers during the continuous antenna movement
    1
  19. use octave/matlab axis visualization scaling for images
    1
  20. do a full scan in one pass, continuous movement
    1
  21.  @saveitforparts  well do you have the rate of movement, and the trigger to the start of the movement, is it instant, you could tune the rate of turning later after recording, by hand
    1
  22.  @saveitforparts  one movement/command at once? movement/sampling is one command? no so good unfortunately, have to get by, unless you can do all at same time
    1
  23.  @saveitforparts  so it cant be first turned on, then moved while recording/turned-on, what a mess
    1
  24. torx? common tools screw heads, the star screw
    1
  25. btw on the earlier note, you could replace all the motors with separate drivers, so you could drive it at same time as imaging/recording
    1
  26. or just diy the whole thing from scratch, as microwave radio radar scanner imager device
    1
  27. what a click bait lol
    1