Comments by "Jkauppa" (@Jkauppa) on "Waterjet Channel" channel.

  1. pressed chain mail is better than actual ring mail, kinda kevlar layered mail instead
    1
  2. ac maglev bearing
    1
  3. jet turbines are easy 200 000rpm
    1
  4. color the side of the spinner with pencil to have the tachometer read it, now it does not recognize a revolution
    1
  5. try making ultra-light metal (like aluminium) but as not-dense as possible, bubble metal, bubbled aluminium
    1
  6. cutting brains
    1
  7. foamed aluminium, lost casting aluminium mesh
    1
  8. so that you can finally smack that base ball
    1
  9. resin bat
    1
  10. do you like to be sit on or do you like punches from heavy slaps, I think impulse is multiple of the weight, in newtons
    1
  11. your "lens" is distorted after the bend
    1
  12. ie your focus succs
    1
  13. diy with two pipes spinning in each other and graphite/torch a soot layer
    1
  14. hydraulic press crush, big jaws
    1
  15. ceramic oxide fine sand mixed with cast epoxy resing
    1
  16. bee honeycomb wax lattice
    1
  17. if you rotate a heavy filled cylinder, shrapnel warning, lets say 120krpm, under waterjet, what happens? also try to send back incoming projectiles with waterjet stream
    1
  18. water jet is a light saber, or ion sabre
    1
  19. like bats? try disc rock shooter, electric
    1
  20. or just plain "old" railgun slings, has to have a separate sling cup
    1
  21. thats a very blunt weapon
    1
  22. flint stones at its finest
    1
  23. hey have you tried sandjet (centrifugal impeller sand blower, no water just some grain sand, more like a plasma cutter but with sand)
    1
  24. junk cannon
    1
  25. try stone saw blade, the cutting material, of the water jet
    1
  26. sling some tangential velocity sling shots
    1
  27. well just a drone motor to spin the sling
    1
  28. what, tesla turbines go 150000rpm
    1
  29. use mag/air/carbon-lev bearings
    1
  30. yes carbon powder surface is a lubricant
    1
  31. try using that for materials you cannot cut with diamond, diamond or other hardness scale 9 stuff, rock
    1
  32. stop wobble by multiple pass, first pass to balance, no need for the first phase you are now using
    1
  33. cast glass knife is better
    1
  34. very edgy
    1
  35. dont you just sand it, water jet
    1
  36. sand polish it
    1
  37. diamond sand polish
    1
  38. chipmunks are beauties
    1
  39. you could make it hollow with a lathe
    1
  40. put some other material left/right squeezing the glass blade, like steel plates, steel-glass-steel sandwich, with through holes with bolts
    1
  41. make a copper saw blade
    1
  42. diy water jet, from a spinning impeller water compressor narrower neck
    1
  43. looks like a baking compressor, slammer, whatever, hammer
    1
  44. what has "thanks giving" have common with commercial items, nothing about giving, only taking
    1
  45. thanks
    1
  46. rip
    1
  47. yees, run home
    1
  48. run fast, or wolf eats you
    1