Comments by "Robert Morgan" (@RobertMorgan) on "Louis Rossmann"
channel.
-
36
-
23
-
Same here, but it's the more I appreciate (despite the remoteness and somewhat social isolation) my 100 acres in Missouri. When I had Covid almost exactly a year ago, I had to isolate here, which was like "Oh no, whatever will I do stuck at home OH WAIT, let's shoot guns, do woodworking, race four wheelers, clear brush, and get paid by work for 10 days lol".
If I'd had to do the lockdown/stay at home thing in a NYC apartment, I'd be a statistic. I had a 1200 square ft apartment when I lived in St Louis for university and that was cramped, yet not all that bad. That would be enormous in a place like NYC. I really enjoy visiting cities, I like seeing that there are lots of other people out doing lots of living things...but it's also nice to f-off away from all that and go to my 'compound' where my closest neighbor is beyond visible range .
18
-
16
-
16
-
@marcellkovacs5452 because most people expect that to be handled in-house.
It's pretty cool though that all an adversary has to do to cripple our nation and compromise national security is take out a vulnerable civilian contractor.
It's like having this huge, super secure facility full of vaults and loot and guards and guns, state of the art security, and depending on normal utility mains power with no on-site generation or backup, so some movie-plot heist crew just cuts your power and all security becomes useless.
It's like people who get into prepping but don't think it through, they buy a ton of guns, gear, food, then when a disaster actually strikes they're found later in a giant cache of supplies, dead the first week from dehydration or waterborne illness because they forgot to prep for their most basic physical need, clean water.
11
-
11
-
8
-
8
-
7
-
7
-
6
-
6
-
5
-
5
-
5
-
You can be against something and still allow it.
For example, I think abortion is reprehensible, it's murder, and I oppose it, personally.
I ALSO feel if a woman decides she wants to make that reprehensible, murderous choice, that's her business. I also don't use any illicit drugs, and I discourage others from doing so, but if someone else wants to mind their own business on heroin, that's their business.
You can be opposed to and against something without imposing that choice on others.
I'm a covid survivor, I had the pre-delta December 2020 real covid. Very mild. I've had no vaccinations for covid. Last and only time I even had a flu shot was 2009 H1N1 swine flu nasal mist, and that made me feel like I was going to die, sickest I've ever been for a day.
5
-
5
-
5
-
5
-
5
-
5
-
4
-
4
-
4
-
3
-
3
-
3
-
3
-
3
-
@sivasankar2784 if we had TRUE cloud computing, your data would never be stored for long on any one system or with one provider. It would be distributed, mirrored, redundant.
I think we need to rethink the paradigms of storage, move to a more biological type base. DNA is a prime example: theoretically, you could take a single cell from anywhere in my body, my 'cloud' as it were, and recreate my body entirely from it, even after the original was destroyed. The data of my genetic makeup is distributed, backed up, in every part of the data itself.
It gets even crazier when you think of identical twins. If I was a twin, and I took my twins DNA, identical to my own in every way, and cloned them...is that a clone of them, or of me? The data is the same either way, so does the difference even matter? It's like having 2 hard drives, identical down to the bit, and you copy one onto a 3rd, is it a copy of that drive, a copy of the other identical drive, both? Is there even any way to tell a difference as far as the information is concerned?
Am I still writing this?
3
-
2
-
2
-
2
-
If it's a metal fitting into a plastic housing IT WILL CRACK AND BREAK IT.
First rule of plumbing and piping, plastic screws into metal, metal does NOT screw into plastic. You have two materials of differing strengths, and the plastic WILL yield to that metal fitting, boom, coolant jacket cracked, battery on fire, people will die and it'll be totally metal.
Another example: When you change the transfer case fluid on a 2007+ Ford Expedition or F150, if you aren't careful when you put the drain and fill plugs back in, to the proper torque and no more, the steel tapered thread drain plug WILL split the aluminum transfer case wide open and now you're out thousands.
That's metal to metal. Even high pressure plastics like Schedule 80 threaded fittings will crack like an egg if you screw a brass fitting into it even a in/lb too much.
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
2
-
1
-
1
-
1
-
1
-
The irony is in China, the Replika bot probably pushes users to improve their lives to strengthen the population. Instead of sexting Chinese users, Sino-Replika is probably like "You know, you'd be so much cuter if you exercised more, here, try this 15 minute cardio blitz playlist, start workout! You did great, you know what else is so hot to me, calculus. Let me show you how to do differential equations, hey you're pretty good at these integrations, I'm going to recommend to The Party in my next report that you should work in the space program. On that note, you need to eat better, I've ordered you some better food from the local grocer to deliver..."
The Chinese version is probably useful and pushes you to be a better person, rather than just fucking it.
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
I'm glad fivepointeightnate stated the obvious before I had to.
If it's a metal fitting into a plastic housing IT WILL CRACK AND BREAK IT.
First rule of plumbing and piping, plastic screws into metal, metal does NOT screw into plastic. You have two materials of differing strengths, and the plastic WILL yield to that metal fitting, boom, coolant jacket cracked, battery on fire, people will die and it'll be totally metal.
Another example: When you change the transfer case fluid on a 2007+ Ford Expedition or F150, if you aren't careful when you put the drain and fill plugs back in, to the proper torque and no more, the steel tapered thread drain plug WILL split the aluminum transfer case wide open and now you're out thousands.
That's metal to metal. Even high pressure plastics like Schedule 80 threaded fittings will crack like an egg if you screw a brass fitting into it even a in/lb too much.
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
No, quite the opposite, when they refer to owner they mean the titleholder. If your name is not on the title, you're just driving it and making payments, you're NOT the owner, you're just some guy they let drive it and make payments. That's why they can repossess it, you never owned it, you just possessed it, now they're REmoving your POSSESSion.
You have all rights to the vehicle, sure, but only USE not ownership, like a condo. You live there but you don't OWN it. The person you pay to live there owns it.
1
-
1
-
1
-
1
-
1
-
That's actually true in many cases, and it's for a good reason: who wants to do your own work when you're paying already for someone else to?
And by that I mean most leases on high-end cars include ALL maintenance for the life of the lease. You're already paying for the dealer to replace your wiper blades, change your oil, even vacuum and wash it in some cases. I know a local dealer that even picks your car up at your house for service and leaves a loaner. That's in the lease price. You get a worry-free automobile for 3 years, then you upgrade to the newest one. It works out for the dealer because then your 3 year old 36k mile used lease, which they hold the records of all on-time maintenance on, gets sold at a premium as a 'Certified' pre-owed car by the dealer.
With cars like BMW for example, this makes the most sense, because with their maintenance schedule you'd be on the hook for thousands + in just routine maintenance yearly on top of the high monthly payments. Congratulations on having your car for a year, it's due for it's "Service II", that'll be $7500.
It's why used BMWs from individuals can usually be purchased inexpensively (relatively) because they deferred all that scheduled maintenance that makes it drive so well. Been there.
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
Wait, PAUSE...HOW did the nozzle get broken in the first place? If it was someone that didn't know what they're doing, well, that's on them, I have little sympathy.
If it was a garage that screwed up and broke it, they're liable to PROPERLY fix it, that's why they're bonded, insured, licensed, etc and I have little sympathy.
If the nozzle just broke on it's own, on a otherwise working vehicle under warranty, I'd expect the dealer/car company to warranty it, and I have little sympathy.
Without knowing how the part broke, or who is to blame for breaking (and if negligence was involved), I'm leery of immediately blaming the manufacturer.
If you put antifreeze in your crankcase because you don't know what you're doing, that's not the makers or dealers fault, is all I'm saying.
I support right to repair, but only when the repair is competent.
1
-
1
-
1
-
Now imagine how that effects employers, they put TONS of effort, time, resources into each employee, just for them to walk with all that value right out the door, probably to a competitor. You have to see more than just the side you want to see.
LONG ago when I was a fast food manager, I remember training when they were talking about hiring new employees, to remember that it cost the company several thousand dollars for a new employee before they even clocked in the first time, all the paperwork, the accounting, the recordkeeping at the national/corporate level. You hire a flake that only lasts a week, it's a major loss that comes right out of sales.
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
If I get taxed to work for an employer, YOU get taxed for working for yourself.
Sorry, until no one gets fucked, we ALL have to get fucked. #equality.
I'm just pissed that people are out here making money and not paying taxes, while I get my W2 and see that oh wait, the thousands you paid in via withholding, not enough, you still owe, meanwhile I see people I supervise who make slightly less than me rake in thousands in 'refunds' and 'rebates' and 'credits'.
Success is punished, poverty is rewarded, rant over.
1
-
1
-
1
-
1
-
1
-
1
-
1
-
If it's a metal fitting into a plastic housing IT WILL CRACK AND BREAK IT.
First rule of plumbing and piping, plastic screws into metal, metal does NOT screw into plastic. You have two materials of differing strengths, and the plastic WILL yield to that metal fitting, boom, coolant jacket cracked, battery on fire, people will die and it'll be totally metal.
Another example: When you change the transfer case fluid on a 2007+ Ford Expedition or F150, if you aren't careful when you put the drain and fill plugs back in, to the proper torque and no more, the steel tapered thread drain plug WILL split the aluminum transfer case wide open and now you're out thousands.
That's metal to metal. Even high pressure plastics like Schedule 80 threaded fittings will crack like an egg if you screw a brass fitting into it even a in/lb too much.
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1
-
1