Comments by "" (@walterrobbins4470) on "Watch Wes Work" channel.

  1. Start an argument with him about a completely different subject and let it escalate until he doesn’t like to talk to you anymore and maybe you won’t have to work on it anymore. You are already on a first name basis with some of those bolts.
    16
  2. I’m going to use a variation of that joke for some of my older engines
    10
  3. It could have been more obvious if the mice had left a note with a confession
    4
  4. I think I can speak for many of your fans. We find repairs like this plenty interesting
    3
  5. The tires were plugged more times than the toilets at Taco Bell
    2
  6. I do that with almost every channel I am subscribed to
    2
  7. Gen 2 welding camera is a success
    2
  8. The speed test results wouldn’t be so dubious if we had slow motion photo finish documentation
    2
  9. Park it in a bad neighborhood in California and let a homeless person move in to have a shelter
    1
  10. Those welds are so nice. Maybe you ought to do that stuff for a living 😂
    1
  11. It would have been funny if you had made your stick man falling down in distress
    1
  12. I always use a six point socket for bleeders that haven’t been touched in a long time
    1
  13. To say that you have no idea what you’re doing is untrue. You don’t know specifically what you’re doing but you do know stuff so you have an idea
    1
  14. With the 135 degree drill sharpening, those bits will go right through microwaved margarine 😅
    1
  15. Looks like tachycardia to me. Put it on medication
    1
  16. Music, applause in the transcript and diagrams for explaining how things work. It’s going to be a good video
    1
  17. I’m a big fan of the Lango tribe but they don’t make cnc oil
    1
  18. Your wife was so excited about the idea of getting it
    1
  19. You could also put some lubricant in your foot shifter
    1
  20. Pretty cool gantry crane for the transmission
    1
  21. The visual representation was a very nice explanation
    1
  22. Best case scenario, what are you going to do with the logging machine?
    1
  23. Slow and careful operation of a backhoe is best if you don’t really know what you’re doing
    1
  24. I think I would prefer to have a platform where I could ride with it and have individual manual controls
    1
  25. So I wouldn’t have to walk back and forth a million times
    1
  26. And folks wonder why no one wants to be a mechanic. I have a theory that engineers go out of their way to make things difficult to work on.
    1
  27. It’s too bad they don’t make a tool for striking things. Just grab the pliers or a wrench or a piece of metal, whatever is close to hand
    1
  28. A battery cutout switch could be installed to save the battery from draining
    1
  29. I came here because someone said you had a good channel. A lot of the stuff you do is over my head but I still watch. If a video is over an hour and a half I don’t want to watch. I skip through patches.
    1
  30. The heater vents are for more expensive models but they just make all the dashes the same to cut costs
    1
  31. The threads were only as hard as a left turn in front of a shopping mall on Black Friday
    1
  32. I don’t know why design engineers hate mechanics so much
    1
  33. Lighter piston and rod seems like it would be a less effective option and less durable
    1
  34. At 13:43 I’m guessing you are going to replace the bolts with grade 8
    1
  35. Finger crossing is for people who rely on luck because they don’t have skill. You don’t need that old witchcraft stuff and that’s where finger crossing comes from.
    1
  36. Self reliance is a good thing to culminate. Kudos for doing it yourself
    1
  37. You were pretty serious about nerd mode except that you didn’t use video game controllers
    1
  38. Snowball engineering does this kind of repairing all the time. Make it better than it was before he got it
    1
  39. Surface grinder is the most dangerous tool in a shop
    1
  40. The gauge cluster was healed by the acupressure treatment with the test probe.
    1
  41. Skates are crucial for rigging when it comes to getting heavy machinery into the spot you need it
    1
  42. The local stealership. I like that subtle dig.
    1
  43. Mustie1 is the best small carburetor guy on YouTube that I’ve ever seen
    1
  44. Your technique is almost backwards of how I was taught but I have never seen the part of splitting the point
    1
  45. They are delusional to think that an abs module is worth that much money. They get away with it because most people figure that they have to have it. In my opinion I would just let the fault codes remain. I wouldn’t pay that money for something that I don’t NEED
    1
  46. About 20 years ago someone made a drill bit sharpener with two different bit holders. One for smaller bits and one for larger bits
    1
  47. I could tell on you about the spliced wires in the control box but I don’t know the kind of people that it would matter to
    1
  48. She forgot to shout “This is Sparta!” When she was kicking the wall panels
    1
  49. Talking about how much money you have in that cabinet. The only way to get your money back is by using them and hopefully passing them down to someone else who will use them. I consider them generational tools
    1
  50. The prices seem a lot excessive
    1
  51. Best thing you can tell the owner is that he has a little bit of time that would be best spent shopping for a different pickup
    1
  52. I prefer working on the old leaded gas engines
    1
  53. I have used a drill doctor with some success but I don’t use one anymore. I use a bench grinder
    1
  54. I have the same brand of plasma cutter. Mine is good for 3/4 plate
    1
  55. Where do you get air hammer bits like that?
    1
  56. You said you tried asking nicely, but you didn’t say please
    1
  57. All else fails, make it more complicated
    1
  58. Just imagining how much fun that would have been if you didn’t have a lift.
    1
  59. Step one, trust nothing
    1
  60. A bunch of struggling YouTube channels would love to have those tire machines
    1
  61. Fancy tools do fancy things
    1
  62. The forklift needed some weight on the forks to get more traction
    1
  63. Anyone can do it? I think there’s a few people who can’t. People with no hands, people with no grinder, people with no electricity just to name a few
    1
  64. I never heard the word please during that time
    1
  65. Max weight for the forklift
    1
  66. What a horrible design. I agree about your plans for the engineer
    1
  67. It looks like the purpose of that machine is to disperse hydraulic fluid onto the ground
    1
  68. The fact that he drew such a detailed and accurate picture just to explain how works is cool. The only reason I would ever attempt to draw a picture of a part is if I was going to a parts store in a country where I didn’t know how to say the name of the part in their language. My artist skills are pretty much stick figures
    1
  69. Switching from GMAW to SMAW
    1
  70. Everyone is always so concerned about the biscuits son, or the son of the biscuit eater. Why is no one ever mentioning the biscuit eater’s daughter?
    1
  71. The asymptote of despair is the best description of any yard work. Never completed and time stretches to infinity
    1
  72. In the dramatic presentation I noticed that the forks hit the trailer deck. I am curious to know if that is accurate.
    1
  73. Now that you have bought the new pump you have the “unlimited time” to get a diaphragm to fix the old pump to have a backup
    1
  74. Oh sure, you waited until I got my pitchfork all nice and sharp
    1
  75. This is your audition to decide if I wanna watch more. So far I like it
    1