Comments by "brodriguez11000" (@brodriguez11000) on "Project Farm" channel.

  1. I'm waiting for when this channel starts crashing cars.
    30
  2. Even weighs the parts.
    13
  3. Neighbors will be visiting.
    11
  4. For consistency in driving. Only thing for really tough wood is hex head.
    11
  5. OBDLink is a good brand. Wide selection.
    8
  6. Old-fashion percolator is very reliable.
    7
  7.  @LucasLeCompteMusic  Without an R rating too.
    7
  8.  @grandrapids57  I imagine some have it as a paid upgrade (usually software).
    7
  9. That would need a lifespan test since that's the biggest problem with solar lights.
    6
  10. Plant an oak seed close to it. Wait twenty years. Remove displaced stump.
    6
  11.  @greentriumph1643  Worse when the battery leaks. Plus I had one where the rubber grips get gummy and bleed.
    6
  12. Maybe a review of crimping tools.
    5
  13. Need to see if there are differences between glue sticks. Also those tools are good for more than gluing. e.g. weatherstripping, etc.
    5
  14. Build up some muscles though.
    4
  15.  @indianboy0453  Need to know how many bowling balls these vacuums can pick up.
    4
  16.  @TuckFrump-r9h  Analog Computer built in.
    4
  17. Drywall screws are designed to snap when torqued too much.
    3
  18. Impedance mismatch.
    3
  19.  @BloopTube  Main thing most fans die from long-term is the bearings wear out (usually sleeve). Had to tear down quite a few and clean and lubricate.
    3
  20. maybe next test will be carpet cleaners.
    3
  21. Bong review. 🙂
    3
  22.  @bebakerus  : Not railroad ties, but some old houses use oak beam joists. Impact with a socket makes a big difference.
    3
  23. Clearance or discount places have good deals on vacuums.
    2
  24. Making the burrs radioactive, then measure the amount that comes off. More material, larger signal.
    2
  25. Use an ozone generator in the cold water line to the washer.
    2
  26. Next test: laughing gas brands. 🙂
    2
  27.  @krasmann  I use an older Bosch (GLM 100 C). The pairing with a cellphone app is really handy, plus the remote triggering for one-person measuring. The tilt meter adds additional functionality combined with the R60 measuring rail, turning it into a digital level. There are some laser tapes that have a built in viewfinder for locating the target.
    2
  28. Handy during a power failure.
    2
  29. Mine was a corded Vacmaster. Never tried as a snow blower, but leaf it did great. Great for other indoor tasks. Shame correct motor brushes can be hard to find.
    2
  30. There are adapters that allow for regular grounds. Not hard to fill up.
    2
  31. EV as battery backup.
    2
  32. I noticed charger proliferation, unless one stick to one brand.
    2
  33.  @ProjectFarm  it would be so nice if some invented a better mousetrap ala spool design.
    2
  34. Use scag around here. Take care, pretty durable, easy to work on.
    2
  35. Pay lots of money, get one made in Malaysia. ;-)
    2
  36. Air blade, but for one's person.
    2
  37. Need E-ink or OLED displays for readability.
    2
  38.  @visible2anyoneonyoutube  British version.
    2
  39. The one you loan to that one individual that's always borrowing your tools.
    2
  40. It would seem like a strange thing when one considers how impacts, and drill bits work.
    1
  41. Rockwell with quick-change has been going strong. I'd recommend an oscillating tool in anyone's tool kit, not just cutting, but scrapping, and grinding as well. Even sanding.
    1
  42. Third-world despots can give a recommendation.
    1
  43. CFM for air tool use.
    1
  44. One test we'll never see on YouTube.
    1
  45. Rosewell REGD-TN439L0
    1
  46.  @o1mtbiker  : Well not a contractor, but I understand the poor economy of cheapening out on one's tools. Costs more, but still going strong.
    1
  47.  @howardosborne8647  one of the reasons to moving the blade around so cutting isn't concentrated on one little spot.
    1
  48. Be nice if there was one that turned off when running dry.
    1
  49. Wouldn't a longer bit have a bigger torque zone?
    1
  50. Vehicle with an inverter.
    1
  51. beep beep beep Is that a truck loaded with money backing up to the loading dock?
    1
  52. For the price one might go with a whole house vacuum.
    1
  53. Vacmaster 12 gallon with blower capability. Under a $100. Experience was first was a dud, returned. Second has been going strong.
    1
  54.  @whitenite007  Drywall being a very soft material it's to insure it's not damaged. That's another reason a special bit is used so it's flush with the surface ready for taping and mudding.
    1
  55.  @brucecoleman7412  I noticed the profile the screw grabs contributed as well. e.g. oval.
    1
  56. Is a hammer handle really going to be dealing with that kind of force in daily use?
    1
  57. Vacmaster VBV 1210 5 HP does decent for the size since it's also a blower.
    1
  58. Good excuse for alex, or siri interfacing.
    1
  59. Problem one manufacturer complained about was there were a lot of counterfeit ELM327s out there.
    1
  60.  @economicprisoner  No emissions requirements. Standards are whatever much like chargers.
    1
  61. Well there's technology for seeing through walls. But it's not something one's going to be picking up at a home improvement store.
    1
  62. Like the trimmer cord brand test one needs to do with chains for these.
    1
  63. OBDLink. Bluetooth and WiFi.
    1
  64. Paint/drywall mud stirrer.
    1
  65. Can any allow one to set the amount of torque? Be a good replacement for a torque wrench. Be nice if they had a 1/2 and 3/8 head so one could use the smaller and bigger sockets. With that said does these require special sockets like impact drivers require special bits?
    1
  66.  @man350z  Company had a WiFi version as well.
    1
  67. Door hinge pins and I found a drawer pull as well.
    1
  68. No, plus some can adjust the degree of stroke (back and forth).
    1
  69. Moisture getting into gauge.
    1
  70. Americans made in America. 😀
    1
  71. Digital vs bubble.
    1
  72. Seems a good pairing with your video on the best cutting string to use.
    1
  73. Garage sale after.
    1
  74. Most likely use a MEMs to measure.
    1
  75.  @dougrobinson8602  True, but the way most use it, it doesn't need to be highly accurate.
    1
  76.  @1pcfred  : Rule #1. Never let anyone borrow your tools.
    1
  77.  @danl.4743  True, so the review needs to include laser targets.
    1
  78. Now THAT is clever.
    1
  79. Anything with power is going to do better. e.g. gas-powered stapler, etc.
    1
  80. Cat toy.
    1
  81. I'm filming! Weee! I'm filming! Weee! :-D
    1
  82. Is a lubricant used with these tools?
    1
  83. Someone suggested soaking line in hot water before spooling and use.
    1
  84. With gauges built into the lid.
    1
  85. Caulk works in a pinch, especially for small holes.
    1
  86. Kind of a toss up between a durable line and not so tough it breaks preventing surface damage to anything it touches.
    1
  87. Cheapest one that can do the job since it's literally flushing money down the toilet. Back with a nice bidet and that TP will go far.
    1
  88. I use a commercial model.
    1
  89. Seems a contact thermometer would do better.
    1
  90. Rockwell is a good, wired brand. The model just a step above mine even allows one to switch to a bigger back and forth so one can cut more per an oscillation.
    1
  91.  @elitescouter  I remember a "weatherproofing" stick made for hot glue guns. Easy to apply and remove.
    1
  92. Riot-proofing the house.
    1
  93. Maybe add one of those ozone systems to a test.
    1
  94.  @mr.knowitall5472  : I'd say a certain worker will have their thermal cutoff engaged. :-D
    1
  95. Kobalt here. Works fine, but eats batteries.
    1
  96. UV for seeing the nasty stuff.
    1
  97. Ah, a video on air cleaners.
    1
  98.  @ProjectFarm  : Maybe around spring or summer a test of those airless paint sprayers.
    1
  99. Test medicine. 🙂
    1
  100. Seems "power outage" and the requirement for a power source are at odds.
    1
  101. Lot of seniors required for the second.
    1
  102.  @JCbrewNweld  Scantool and Amazon.
    1