Comments by "Random Acts of Video" (@Boodieman72) on "Rainman Ray's Repairs" channel.

  1. Now that's what I call customer service.
    59
  2. Shelby's came with Ford engines, so it's no wonder there are transplant rejection issues ;)
    34
  3. Not asking for help is a sign.
    15
  4. It's a race between Dave getting the old engine out and Ray getting the delivered engine out if the crate.
    14
  5. Why would the shop pay? Maybe the shop Ray works had as integrity.
    13
  6.  @RainmanRaysRepairs  As a customer I would rather have you call me and let me make that decision. Some people care about their car and most people don't and you did say the car was taken care of after lifting off the valve covers.
    11
  7.  @RainmanRaysRepairs  If you put your finger over the hole in the vacuum you will get more walnut shells out when you are only vacuuming.
    9
  8. How much do you want for it Eric?
    7
  9. You know it's bad when the plasma cutter is needed :)
    7
  10. Happened to my Audi and the rings are stuck in the compressed state :(. The dealer wants to put an engine in but maybe BG EPR + MOA can help, anyway it's a lot cheaper than an engine.
    6
  11. This is what guys are doing when their girlfriends or wifes think they are out cheating.
    6
  12. They make designs that work on the assembly line not for the mechanic.
    6
  13. Brandon is a NASCAR driver
    5
  14. It just needs new a catalytic convertor and some new o2 sensors ;)
    5
  15. Or bollocks
    5
  16. Only if you dont have a hood
    5
  17.  @markadams5429  I had to get a used engine put in my Audi and it had a 1 year warranty.
    5
  18. The hybrid battery is the starting battery, the battery in the trunk is for accessories.
    5
  19. Practice makes perfect ;)
    4
  20. Is that Uncle Rodney I hear?
    4
  21. Do they have Fluid Film in Florida? lol. Can't pre fill the filters I the cars I take care of as the are mounted vertically down so it would all drain out.
    4
  22. Ship it off to Eric :)
    4
  23. Had something similar happen on my used Audi, dealer replaced the engine with a used one. The new used one had a similar issue but at a much lower rate. I added a can of Engine Restore and haven't had any oil loss since.
    4
  24. They made it for quick lube places as it's cheaper, those places car owners care more about cheapness over quality.
    4
  25. The engineer would just tell you to remove the engine.
    4
  26. They probably have a special tool for it ;)
    3
  27. This is why it's important to check the oil level.
    3
  28. I think a body shop would be the next stop for that car if they want it fixed.
    3
  29. My 2016 Audi doesn't have a dipstick.
    3
  30. You're supposed to get the inspection before you buy it, not after.
    3
  31. Unless the count the Grand Canyon as a pothole.
    3
  32. Put in a can of Engine Restore in, might run better at least.
    3
  33.  @RainmanRaysRepairs  Haters going to hate.
    3
  34. I have yet to go to a shop that will diagnose for free.
    3
  35.  @RainmanRaysRepairs  I would run OE or Signature Series for cars that take it unlike mine that I use 0W-30 European Oil from Amsoil.
    3
  36. Those estimates are ridiculous. They are easy to work on and there isn't that much to the 100,000 mile service.
    3
  37. You can always put a magnet on the oil filter and see if something accumulates.
    3
  38.  @markadams5429  It was a used engine, no idea where the dealer got it from, as I didn't have to pay for it.
    3
  39. Everything is a hammer 🔨⚒
    3
  40. Dave has the right tool for the job.
    3
  41. The issue isn't customer supplied parts. My local small shops charge the same as if they supplied the parts, so the customer gets the products and parts they want and the shop still makes money. If a shop wouldn't install my parts I would simply go somewhere else.
    2
  42. Interesting but for tightening the filter it should be done to the correct torque setting with a torque wrench.
    2
  43. One of the few mechanics I've seen use Amsoil, hope you'll be offering it to your customers.
    2
  44. New on the rears
    2
  45. Didn't see any zip tie or grease action.
    2
  46. Ray's just not used to how real luxury car are put together ;). Must be another YT video on how to do this that you could copy
    2
  47. I remember just using petroleum jelly on the terminals.
    2
  48. 60 degrees isn't cold, you have been in Florida too long ;). The dealer tossed the scanner out which means its no longer their property.
    2
  49. Time to fire up the chainsaws and wood chippers
    2
  50. If it has a torque specification then it should be torqued, just because most people don't isn't relevant.
    2
  51.  @Laurelinad  Imagine my surprise pulling out the dipstick only to find it's just a plug.
    2
  52. Pierce Manufacturing has it's HQ where I live. They make ARFF equipment as well as fire trucks.
    2
  53. Not sure why you think people can't fly drones over your house at less than 400 ft.
    2
  54. Then watch it in parts or don't watch it.
    2
  55. Good job by your daughter to let you know about the gun. Better for you know and it be safe than not knowing and something happening.
    2
  56. Seeing professionals on the struggle bus makes us DIY'ers feel better.
    2
  57.  @sunxishan  I'm just saying that it should be up the the customer to decide.
    2
  58.  @JasonJohnson-yu8zf  Should be up to the customer to decide.
    2
  59.  @JasonJohnson-yu8zf  All I am saying is it should be the customers choice.
    2
  60. Why would you want to run E85?
    2
  61. Ray is lucky he doesn't live in the rust belt or he might change his thinking on lubricating the slides. Of course there is lubricating and just slathering it.
    2
  62. That car is called "mechanics special" where I live.
    2
  63. Interesting pressure relief system on that unit.
    2
  64. Ray, ever considered installing a catch can / oil-air separator?
    2
  65. All it needs is a new engine, transmission and suspension :)
    2
  66. Amsoil, cheaper and better quality than OEM
    2
  67. Get it dry ice blasted before undercoating for maximum adhesion.
    2
  68. Hard to insult a company that you can't even spell the name of.
    2
  69. Did the last person put the filter on with an impact gun?
    2
  70. Oil is supposed to be changed based on distance and time. Oil needs to be changed every year regardless of mileage, unless you are doing UOA. Ray, are you using Signature Series oil or just OE?
    2
  71. I think getting an inspection before you buy is a better idea. Time for a BG Dynamic Engine Treatment.
    2
  72. Ray, get yourself a reusable oil filter then you only need to buy it once.
    1
  73.  @hotpuppy1  No, they are designed to filter for as long as your oil change interval, then they get washed with brake clean (Ray's favorite), dried and put back.
    1
  74. Got one for the other foot?
    1
  75. Cleaning the bucket seats is pretty easy to do with a couple products and a leather brush. Labocosmetica Derma Cleaner and Derma Sealant.
    1
  76. Just replace the cables, or is the customer too cheap to pay for that?
    1
  77. Lots of flavor on this truck. Just needs a new frame.
    1
  78. Would have been nice if it had air brakes then he could have stopped.
    1
  79. As VW and Audi are the same company....
    1
  80. It's the no mercy reversey
    1
  81. I think you found out why the brake pedal went to the floor
    1
  82. I never use self checkout.
    1
  83. Time to file for workers comp? lol
    1
  84. I would get the charge correct installed first as you ran out of refrigerant.
    1
  85. When your tires go rusty it's time for new ones.
    1
  86. VR will not replace mechanics as someone still has to do the physical work.
    1
  87. Rotor tip seal failure?
    1
  88. You didn't do it for no reason, you did it for the video.
    1
  89.  @lukas187  Which is bad advice as different people have different hand tightness. This leads to things mentioned in the video, like the quick lube techs that "over torque". If everyone used a torque wrench then there wouldn't be any issues.
    1
  90.  @lukas187  Which ones aren't reachable? It's not about it leaking but rather over tightening it.
    1
  91. After being sick your eyecrometer just needs recalibrating.
    1
  92. It's still cheaper to fix than it is to buy a new car. Things at the dealership always cost at least 2x more.
    1
  93. Have you tried melting it out with oxyacetylene?
    1
  94. I never have a problem paying a small, under $100 diagnostic fee as now I am educated on what and why.
    1
  95. Does it matter how it looks when you are welding on an exhaust that you won't see, as long as the noise is gone?
    1
  96. Worth fixing? As a side project maybe or for a farm truck. Sounds like a diesel when it's at idle.
    1
  97. That's not the right color for diff fluid.
    1
  98. If you had a heat pump in the shop then you would have heat and ac in the same unit.
    1
  99. As if sounding smart is bad thing, geeze.
    1
  100. Based on what "steve" says it doesn't sound remotely like what a cetane increasing additive does. Sounds more like a diesel injector cleaner.
    1
  101. Unless you are getting paid more than 50K for this, give it back and have them take it to restoration shop.
    1
  102. Guess the 5.4L owner didn't change the timing chain when they were supposed to.
    1
  103. A cotter is a pin or wedge passing through a hole to fix parts tightly together. In British usage cotter pin has the same meaning, but in the U.S. it means a split pin.
    1
  104. Oil changes are so simple that unless you have a handicap you should change your own oil.
    1
  105. You can't tell much from oil color, still would be nasty oil on this truck anyway.
    1
  106. The people that say products are snake oil have never used the products.
    1
  107. Have you tried tweeting @TeamYouTube for help?
    1
  108. Zero Drive ratchets are available in 1/4" drive already.
    1
  109. Could always buy a diesel generator or one of those whole house backup generators.
    1
  110. Ray, I sell heat pumps if you are interested in upgrading the air conditioning / heat.
    1
  111. An honest mechanic will make money over time a dishonest one won't, unless of course they work at a dealership.
    1
  112. Looked like the engine sneezed and all the boogers came out. Motors are electric, so a motor is not an engine.
    1
  113. Get Dave on that first thing in the morning ;)
    1
  114. It would need to go to a welder fabricator to fix the rust issues before fixing any mechanical issues. It would then be up to the customer if they want to pay for that.
    1
  115. Send that engine over to Eric at I Do Car :)
    1
  116. You can always use the hyper premium Amsoil ATF ;)
    1
  117. You will able to give Eric back the pounds of screws.
    1
  118. Might be an idea to use a transmission flush in addition to what you are doing.
    1
  119. I can see Valvoline copied Amsoil on the bag idea.
    1
  120. Even inside the engine bay of a car outside in the lot you can still hear the damn phone, lol.
    1
  121. Did he say they were replaced with new parts or just replaced?
    1
  122. That little kit is so cute. You want to sand off the yellowness then polish the scratches from the sanding and finally coat the lenses.
    1
  123. Guess I'm not smart enough to figure out where you worked or really cared.
    1
  124. Break out the laser cleaner and it will take care of the rust.
    1
  125. Cold air intakes, more flow but almost zero filtering.
    1
  126. Those seats are disgusting.
    1
  127. Which intake cleaning tool is that?
    1
  128. Aluminium can be welded quite easily. The audio is horrible compared to other videos, only on the left channel.
    1
  129. Customer probably means he deleted them but still has them at home.
    1
  130. After so many attempts, why didn't you drill it out?
    1
  131. That oil pan is nasty. I guess we know who doesn't use an oil flush each oil change.
    1
  132. They tried to be a Mercedes SL but failed.
    1
  133. I think you should diag what's wrong with the Dodge first.
    1
  134. Ray needs a plasma cutter, lol
    1
  135. Got ripped off at the dealer...duh.
    1
  136. I wonder what happened that the customer would think they need a new oil pump.
    1
  137.  @MrMustangMan  Low oil pressure is caused by a worn engine not an oil pump.
    1
  138. Then you get told the customer is waiting. lol
    1
  139. Extended warranties are fine as long as you don't have to pay for it.
    1
  140. Did you get the tire pressure light addressed? ;)
    1
  141. Extract the fluid through the dipstick and you won't make a huge mess.
    1
  142. If you own your own business how can you be late to work?
    1
  143. It's like the car as diarrhea.
    1
  144. Cross reference to Amsoil ATL, in case you are wondering :)
    1
  145. Every job is just an excuse to buy a new tool, lol
    1
  146. Someone knows which lubricants to use.
    1
  147. Extract the oil then you never have to worry about stripping the drain bolt.
    1
  148.  @richardbicker640  I don't know, I do my own oil changes.
    1
  149.  @richardbicker640  I enjoy doing it myself and I don't have to drive anywhere to do it. No point in paying someone else to do such a simple task.
    1
  150. If they are the same battery but with different labels it doesn't matter.
    1
  151. An oil flush would free up any stuck rings and get rid of the sludge. Cheaper than taking the engine apart. Engine Restore might help too.
    1
  152. When in doubt, Engine Restore :)
    1
  153. If you reverse the refrigerant flow you can turn the AC system into a heater.
    1
  154. Wonder if there are any piston nuggets.
    1
  155. I like the fluid exchange process videos.
    1
  156. There are super affordable plastic welding kits available.
    1
  157. Amsoil has polymeric truck, chassis and equipment and polymeric off-road grease.
    1
  158. Don't cause issues for the next guy as the next guy might be you.
    1
  159. Extract though the dipstick tube, gets more oil out and you don't have to mess with stuff like this.
    1
  160. The engine rebuilder should pay.
    1
  161. I think the shop phone ringer must have finally got to Ray.
    1
  162. I had a '93 F-150 that had a 5.7L engine. It rusted away in Wisconsin.
    1
  163. Amsoil makes several types of bypass filter systems.
    1
  164. American land yacht...for sail er I mean sale.
    1
  165. The carpal bones are bones of the wrist that connect the distal aspects of the radial and ulnar bones of the forearm to the bases of the 5 metacarpal bones of the hand
    1
  166. No oil pressure or bad oil pressure sending unit? I think Eric at I Do Cars would love to tear this engine down.
    1
  167. I love a good spill and fill.
    1
  168. So many fault codes points to electrical issues or CPU issues. I'll have to see if I am correct.
    1
  169. Anyone get the Signature Series oil yet?
    1
  170. I agree with your position, if you decline a service you can't get a warranty on it.
    1
  171. No flood line = 100% under water.
    1
  172.  @dantesinfernopurgatory7826  All direct injection engines get carbon on the intake valves.
    1
  173. Ray, are you doing any of the BG Dynamic Platinum Engine Restoration Service
    1
  174. Was the book written with a quill pen?
    1
  175. Interesting to see when you use BG products over Amsoil ones. I would have used Signature Series oil for the police car.
    1
  176. No need to pre-fill an oil filter. Heck my oil filter is mounted "upside down" so it would be useless anyway.
    1
  177. If you keep training your wife you will have a second tech in the shop ;)
    1
  178. The video is very edutainmental.
    1
  179. Blame Caesar for January 1st being the start of a new year as he honored Janus, the Roman god of beginnings.
    1
  180. I hope it gets fixed by someone.
    1
  181. It's a cappuccino machine :(
    1
  182. This is why you don't try and finish someone else's work :)
    1
  183. i think that "kitchen hood" is the venting system for a paint booth.
    1
  184. So many Federal Officers have a thick Indian accent :)
    1
  185.  @inoahmann7542  I am aware of the MMI section, it also has a code in the instrument cluster when you are a qt low.
    1
  186.  @nigelcox1451  I do my own oil changes using an extractor which is when I found out that it was a plug not not an actual dipstick.
    1
  187. Hope you get to fix the leaking water pump and inop fan.
    1
  188. Lotus must be able to get you the right part, they do have dealers in Florida
    1
  189. It would have been interesting to have seen a leakdown test as well. Maybe this engine will show up on Eric's I do cars channel.
    1
  190. P is Papa
    1
  191. I didn't see much more than surface rust, not a big deal.
    1
  192. It's only engineered that way because of US EPA regulations.
    1
  193. If they hit a cow I doubt you would have seen the car in your shop. ;)
    1
  194. Extracting though the former dipstick tube would make removal a lot less messier.
    1
  195. According to Lexus it's Lexuses. I prefer Lexi though.
    1
  196. I wonder if each BG product uses different types of snakes for the snake oil depending on application. lol
    1
  197. Does Florida even have a winter?
    1
  198. Scorpions mean it's an Arthbath version
    1
  199. It would have been better if you had switched to a K&P Engineering filter. Has 7 times better flow rate. They also can be taken apart, inspected, cleaned and reused.
    1
  200. I would have thought your workplace would have wheel dollies.
    1
  201. The problem is flat rate work. IMHO techs should be paid on salary.
    1
  202. Just changed the cams now it runs rough, oh an customer is waiting. lol
    1
  203. ZeroDrive would work on the 1/2" and 3/4" tools first, based on what it's listed on their website.
    1
  204. Did the engine blow because there was no oil or was there no oil because the engine blew?
    1
  205. I bet the Snap On person would be right round in the truck ;)
    1
  206. I wonder if the dealership is ready to pay for an engine if they f'd it up.
    1
  207. There is ethanol free fuel where I live. The No Spill fuel cans work great for me.
    1
  208. 18,000 miles should be nothing for Amsoil Signature Series ;)
    1
  209. Stop using the pan plug and just extract it through the dipstick tube.
    1
  210. It's a Jeep thing
    1
  211. Quick change oil place hurt them, my guess.
    1
  212. That's why you don't leave your keys in the car. Amsoil filters are made by the same company that makes WIX and MANN filters.
    1
  213. Hi Dave
    1
  214. The best way to stop the oil splashing..extract the oil rather then use the drain plug on the pan.
    1
  215. Given what the customer does, perhaps an F-250 would have been a better choice.
    1
  216. The BG platinum intake cleaner worked wonders on my A4 Audi. I was hoping to see BG dynamic duo
    1
  217. Management creates a bad work environment then wonders why they don't have any workers.
    1
  218. Maybe it needs some of the various snake oil products, lol
    1
  219. How can it be a water pump if there is no pump part?
    1
  220. It work better if you polished out the scratches before applying the coating.
    1
  221. I smell subterfuge.
    1
  222. Just need Banks to make them in red ;)
    1
  223. It sounded like it was higher up towards the wheel but it's impossible to tell where the sound was coming from though a video. I hope you can show the fix.
    1
  224. End of transmission...in more ways than one.
    1
  225. Used transmission might be an option.
    1
  226. First Karen / Kevin ;)
    1
  227. Poor quality oil filters.
    1
  228. They aren't hard at all, I've worked on my Audi A4 with zero issues.
    1
  229. Who cares what brand the tool is as long as it gets the job done.
    1
  230. Drain plug, eh, who needs them when you can extract the oil.
    1
  231. 🤗
    1
  232. You can get the Amsoil in 55 gallon drums.
    1
  233. Extract the oil through the dipstick tube.
    1
  234. Why fight the drain plug when you can just extract through the dipstick?
    1
  235. I wonder where the scumbaggery happened in the chain of custody.
    1
  236. I thought the chains connecting the truck to the trailer were supposed to cross.
    1
  237. Instead of trying to run a bead, just do a lot of spot welds until the join together in the same pattern you should use to tighten lug nuts.
    1
  238. Audi isn't hard to work on.
    1
  239. That's what I used in my Audi. Ray, you can always buy the BG Rev-It tool ;)
    1
  240. Looks like there was a dipin sick missing.
    1
  241. I'm sure you can get a local Amsoil dealer to supply you with high quality stuff in bulk containers and quantities.
    1
  242. Is Eric O. sending you some cars, lol
    1
  243. Eric O. will teach you all about dealing with rust :)
    1
  244. Do you exchange the old ones for the new ones or do you get to keep the old ones?
    1
  245. I'm surprised checking the battery condition isn't in the diag tree.
    1
  246. Just replace the joints, no need for all the other hardware unless it's bent.
    1
  247. Ray, Amsoil has oil change stickers you can buy, G3372
    1
  248. Mount Washington (New Hamshire) Sees Record Wind Chill of -108, Adding To Its Extreme Weather Reputation
    1
  249. Still find it funny professionals don't extract the oil.
    1
  250. I've done the same thing but in a manual spray can.
    1
  251. That oil change needs a BG flush.
    1
  252. I think you are supposed to torque all the lug nuts not just 4 out of the 5.
    1
  253. Misdiagnosis or perhaps they were both leaking?
    1
  254. For those with air brakes, disregarded this :)
    1
  255. 3 to 4 hours if you are a Range Rover tech :)
    1
  256. Poor maintenance led to this
    1
  257. Diesel Logic did the right thing by admitting they made "bad" products but have fixed the issue. Diesel Logic needs to address any issue with their products just like other companies should. Much better to have a company that address an issue when they are made aware of it.
    1
  258. I guess the Ford owner also remembered when alternators were $100.
    1
  259. If it's snake oil, why does it work?
    1
  260. Dealership ripped off customer, say it ain't so.
    1
  261. There is a difference between aftermarket and performance aftermarket.
    1
  262. Wish I could buy the BG Dynamic kit from you Ray.
    1
  263. My thought was (based on personal experience) the slide pins aren't lubricated.
    1
  264. On similar trucks I drove you engaged the cruise control and increased the RPM with the cruise control and it went into high idle.
    1
  265. The correct MB procedure is to extract the oil though the dipstick tube. It shouldn't take 45 min for an oil change.
    1
  266. @NEED2CONNECT It does not take 45 min to do an oil change on that car.
    1
  267. I had a similar issue on my Audi A4 and sadly it turned out that the fuel injector was leaking down the cylinder wall and that cylinder had (has) super low compression because of it. The verdicts reached by two shops one being the dealer was it needs a new engine :(
    1
  268. Maybe they don't need Fluid Film in Florida ;)
    1
  269. Are you going to switch over to the Amsoil transmission flush or keep using the BG stuff?
    1
  270. The viewers demanded longer videos.
    1
  271. Tell the customer to go to the local auto parts store and look for products labeled "miracle"
    1
  272. If you ever watched the movie This is Spinal Tap you would know why they are 11
    1
  273. The only thing I miss from the old shop is the phone ringer.
    1
  274. Timing belt / chain should be replaced every 100k or sooner based on the manual.
    1
  275. Mechanics with a conscious.
    1
  276. It's not the heat so much but rather the density altitude that affects aircraft performance.
    1
  277. Surprised you haven't put in any AC in the shop yet.
    1
  278. If they have the part in stock it probably means its a common problem.
    1
  279. Aren't they self adjusting?
    1
  280. I think I'd switch to a different material lug nut afer getting them off, like stainless steel.
    1
  281. The isms are causing a schism
    1
  282. Cosmoline will prevent them from going rusty.
    1
  283. Might have been an idea to extract the transmission fluid out before dropping the pan.
    1
  284. I think the inspection should be before you purchase. Yes, Amsoil makes European oils.
    1
  285. Ray, take a look at the CTEK PRO25SE battery charger, you can even mount them to the lift.
    1
  286. It would probably make more sense to replace the engine with a used one than fix it with the amount of miles on the current engine.
    1
  287. I had an Infiniti G20t and never the dashboard bubble up, but then I live in Wisconsin not Florida.
    1
  288. I would run some Amsoil engine flush through it then see if you still need to drop the pan.
    1
  289. Use a battery charger that desulphates.
    1
  290. You couldn't be a politician as your are far to honest.
    1
  291. Of course you have to pull the dipstick out, how else will you get the extraction tube down the dipstick tube to remove the oil?
    1
  292. Says Euro Junk when it's his fault for not closing the hood.
    1
  293. Do you use the BG Hi-LOW oil?
    1
  294. The new shops healthy helper looks better than the one at the last shop.
    1
  295. I find it unsatisfying that you don't torque the oil filter to specification.
    1
  296. They should have had those cylinder laser cleaned before sending it back to you.
    1
  297. I would prefer a V8 Lotus, like they used to be.
    1
  298. Brake clean the duct tape of the mechanic.
    1
  299. When you want to quit your job but then you remember your self employed.
    1
  300. Put the Amsoil Signature Series in and that engine will live forever!
    1
  301. I thought Ray had a BG coolant flush machine.
    1
  302. Never seen you so excited about parts delivery.
    1
  303. Use non ethanol fuel.
    1
  304. Customer already has 4 new tires :)
    1
  305. I'm wondering why you didn't just rivet it, like the way it was.
    1
  306. Wondering why you haven't put in A/C in the shop.
    1
  307. Ray, have you looked into Evans Waterless Coolant ?
    1
  308. Not pouring just any oil, pouring Amsoil!
    1
  309. Americans scare easily.
    1
  310. Those are some big flavor chips.
    1
  311. Can you just take of the split boot, clean and re-lube and install a new boot?
    1
  312. Still much quieter than when I had to do one in a box truck I was driving for a job.
    1
  313. You only pull out in front of a truck once.
    1
  314. Perhaps they will just junk it rather than fixing it.
    1
  315. White zip ties, must be a Jeep thing
    1
  316. All of this because someone didn't grease the u-joints. Good luck Troy!
    1
  317. As long as the solder joint stays together it doesn't matter how you do it.
    1
  318.  @Chris-hw4mq  It depends on why the engine was in the junkyard.
    1
  319. I would have thought there was a switch to force a manual regen like there is on commercial trucks.
    1
  320. Extract the oil though the dipstick instead.
    1
  321. This is why it's important to use a torque wrench.
    1
  322. No heatwave in Wisconsin.
    1
  323. I've been waiting for the BG Dynamic Engine service.
    1
  324. Need more ugga duggas
    1
  325. They do make diesel powered gen sets. Modding the truck makes it more interesting.
    1
  326. Why do people bring in cars with no fuel (unless that's why its in).
    1
  327. Can't get it out? Do what the rust belt mechanics do and apply heat, lots of heat.
    1
  328. Should use better lubricants and filters.
    1
  329. I doubt you could have fixed that in the parking lot during the thunderstorm.
    1
  330. Florida, as far south as you can go without having to speak Spanish.
    1
  331. Yes, there is a channel called ScannerDanner
    1
  332. I would think walnut blasting would be a better choice on direct injection engines even if you have to take it apart. I wonder about the use of either in a diesel engine, which would be better.
    1
  333. John Dow JDI-20COMBO-B would have been my choice for an oil drain.
    1
  334. There's malice in the combustion palace.
    1
  335. Sounds like the only thing rattling around is inside the customers skull.
    1
  336. I didn't notice any difference in the audio.
    1
  337. I thought you had the wife unit doing brakes :)
    1
  338. Didn't the original AC Cobra originally come with Ford engines?
    1
  339. Most used cars are sold as-is, which is why you should get them inspected before you buy it.
    1
  340. Mustang GT with an auto...yuk
    1
  341. You can go for manual tools and most of it is parts and labor, you would have zero in labor and you would be paying for parts regardless.
    1
  342. Ray, try the Rode wireless mics
    1
  343. When you upgrade the intake it's always a good idea to upgrade the exhaust system for better flow.
    1
  344. All Eric-O's projects are restorations given the rusty frames and parts :)
    1
  345. The cab light is on because the doors are open.
    1
  346. These scams are all over Youtube, lots of channels have them. I can't believe people still fall for these scams.
    1
  347. It no longer identifies as a fastener - CSW
    1
  348. Could you drill it out? Maybe reach out to your friend Eric O. as he deals with rusty, crusty stuff all the time.
    1
  349. The only tool you can use to install an oil filter would be a torque wrench.
    1
  350. Not getting the oil out is the reason to use a vacuum extractor.
    1
  351. Clapped out.
    1
  352. Its that dirty as no one has done an engine oil flush on it.
    1
  353. I wonder if the insurance company know about the steering wheel swap.
    1
  354. So the government is calling Gretta Thunberg an alien?
    1
  355. Motors run on electricity and engines run on combustion.
    1
  356. Get yourself a Turbo nozzle for your pressure washer.
    1
  357. I can only find the Zero Drive in 1/4 inch.
    1
  358. Straight co2 will give deeper penetration and it's cheaper.
    1
  359. Ray, Importapart sells used ECU's They are also I Do Cars on Youtube.
    1
  360. In order to remove the oil pan you need to lift the body off the frame then the engine from the chassis ;)
    1
  361. I'm no expert but it sounds like the magnet or one of them if there is more than one in the cam has become demagnetized.
    1
  362. I thought you were going to do the tire pressure sensors.
    1
  363. Did you check the brakes? I know you did but didn't mention it later.
    1
  364. It could be a consumer that bought the part, replaced their part then put the used part back in the box, took it back and said it was the wrong part.
    1
  365. Ray might have an issue with longer videos but we don't
    1
  366. I think the solution to this situation might be psychosomatic
    1
  367. I have a place to get rid of my used oil for free and they burn it for heat in their business.
    1
  368. You are supposed to get the inspection BEFORE you buy it.
    1
  369. 10,000 mile oil changes are no issue if you use the correct oil. Even BG says that adding MOA will let any oil go to 10,000 mile. In this cars case the dynamic cleaner system might be a better option.
    1
  370. I do love an encore presentation.
    1
  371. When in doubt, get a bigger hammer.
    1
  372. Customer is probably going to buy a bottle of fuel cleaner from the parts store.
    1