Comments by "Random Acts of Video" (@Boodieman72) on "AMMO NYC" channel.

  1. One tool you didn't mention Larry is the Tornador.  Before getting my Optima steamer I used the Tornador to clean fabric seats.  Folex is a good chemical to use as well for those on a budget. 
    12
  2. Would it be possible to hand polish that vent area rather then use a tool, as its such a small area, or do you really need the power of the machine?
    11
  3. High quality engine oil doesn't come from the ground its engineered in a laboratory often from natural gas. The drain interval in the owners manual is for conventional oil (unless its factory filled with synthetic).
    11
  4. Surprised you didn't take the wheels off, esp as it's already in a shop.
    9
  5. Larry, its not your fault, its the weathers fault.
    8
  6. Wish you had posted this in the fall, before it got below freezing. 
    5
  7. Are the painted stripes under the clear coat or painted on top?
    2
  8. 3M Adhesive Remover works well for the final adhesive. 
    2
  9. Yes they should buy it, duh.  Its how much they pay for it.
    1
  10. The other option is to have a lot of pads and just switch them out.  Then when you are done, or at home, wash them all.
    1
  11. You just need a steamer that can add more moisture than the dry vapor steamer you look like you are using.  
    1
  12. Are they swirls or holograms from a wool pad?
    1
  13. Its not fall here in Wisconsin.  Still a great video by Larry.
    1
  14. Cars are meant to be driven, not stared at in a museum.
    1
  15. The problem Kevin is having is that the pad he is using is too large for the surface.
    1
  16. Why would there be less clear over the painted stripes?
    1
  17. I thought it was painted on.
    1
  18. Did the Dynabrade head come before the Rupes?
    1
  19. Have you ever use a Dynabrade head? Turns the rotary into a DA, and is switchable on the fly.
    1
  20. Polarjet has been making ice blasters for detailers in Europe for a long time.
    1
  21. Why aren't you claying before polishing?
    1
  22. Larry, which model Festool is that?
    1
  23. How much did you charge for that Larry?
    1
  24. Its easy on a composite airplane, not as easy when you're dealing with rivets on a metal aircraft.
    1
  25. Been to see the races at Road America, wasn't a big wow to me.
    1
  26. If you didn't know how much clear coat was on the Alfa, why didn't you measure it first?
    1
  27. If I use water to wash my car at home in the winter it would become a giant ice slick.
    1
  28. Bricklin was / is Canadian.
    1
  29. Which Dino-Lite microscope are you using?
    1
  30.  @liammccaffery6950  You can now get one for $14k.
    1
  31. Have you ever used a Dynabrade head?
    1
  32. Any chance your going to offer the product used in the video to us mortals?
    1
  33. mils isn't accurate enough however micros is accurate enough. After watching KDS / Lake Country Mfg, most orange peel is in the first 6-8 micons.
    1