Comments by "" (@chrisbailey5055) on "Rainman Ray's Repairs" channel.

  1. I see the problem, your corvette has an automatic transmission.
    514
  2. Ray, just a small thing, but it makes a difference, put the iron under the wires, and flow the solder into the heated wire.
    273
  3. There used to be a time when pickup owners were the few that understood how things work...you know mechanically inclined. It seems now that the trucks are used to treat microphallus.
    160
  4. I predict they are going to have Ray replace all service components, get the truck detailed, defog the headlight covers, install a bed liner, and just generally treat the truck well.
    50
  5. The cylinder head guy needs to have a chat with the timing chain guy.
    32
  6. That is one angry squirrel.
    29
  7.  @irahays3869  My wife has never owned an automatic.
    26
  8. that minivan sounds like cicadas.
    24
  9. 6:45 Ray is now working out of Tampa's hottest night club.
    23
  10. Good suggestion, Ray has a very fancy snap-on thermal cam that does not get enough channel time.
    19
  11. One thing I think worth pointing out, that trailing arm bracket that was mangled/ ripped from the mounting bolts...that really says a lot about the strength of bolts. The shear forces on that bracket were huge, and the bolt came out just fine...I was expecting that to be a tough extraction.
    16
  12. Ray, have you thought of doing a video explaining what knock and other basic engine sounds and problems are? Add well as the detriments of using cheap gas? With so many followers this seems like a good teaching moment. O and please tell people not to dangle for five pounds of keys in their ignition.
    15
  13. 33:37 is that grease coming out of a torn dust boot?
    15
  14. Post purchase 3rd party inspection...very logical.
    14
  15. That's why everything looks funny in that engine bay...there are two cylinders missing.
    14
  16. Ray has done a relly good job of learning how to avoid filming license plates while simultaneously avoiding the name of his shop without cutting the camera. A skill that I am sure is....
    14
  17. This is what made the original wheeler dealers great...the current version is similar to that annoying scotty kilmer guy.
    12
  18. If the owner of this car had enough knowledge to top off brake fluid, they would have had enough knowledge to get the front brakes done at the appropriate time.
    12
  19. Did you make your assistant clean up all the spark fluid you spilled?
    11
  20. I mean that really seemed like a job for JB weld.
    11
  21. door of death is installed backwards. it opens the wrong way, easy to pop hinges and get inside....
    11
  22. 11:00 props to the audio editor, putting in real time sound over 2x speed footage.
    11
  23.  @ranger178  do you think those chargers survived those jumps?
    10
  24. I swear I heard "snake oil" preceded by it being poured into the engine.
    10
  25. This is going to get interesting. Ray has started doing viewers cars, people are putting the name of the shop in the comments...either the owner realizes the gold mine, or this blows up in a bad way.
    10
  26. Ray, all of those black spots on your ceiling insulation are most likely mold...especially around the leak.
    9
  27. Yeah, as others have said, those lock rings are under compression, not tension...unless you are flying and come to a sudden stop, but at that point you have other things to worry about.
    8
  28. not a Florida car...or a florida car that lives ON the beach.
    7
  29. Cerberus is the car god, three heads, so things come in threes. That's why body shops and junkyards have beware of dog signs.
    7
  30. That's crazy, I have driven gm cars for 30 years, no issues... My wife owned a Honda that had required constant repair. We sold it for sonic, 100k miles later, normal maintenance only.
    7
  31. HMMM...i wonder if the radiator has some sort of valve to easily drain the coolant before you start taking hoses off?
    7
  32. please give the owner a lesson on RADAR detector placement.
    6
  33. 6:25 sounds like the dentist's office.
    6
  34. 22:59 someone did not disconnect the battery.....
    6
  35. no link above.
    6
  36. I don't like jeeps, I normally hit the like, but this comment will get you engagement without me helping to fix that thing.
    6
  37. un-doing plastic press clips gives me anxiety.
    6
  38. remove oil via dipstick tube. They don't change the crush washers either.
    6
  39. I was sure the Hyundai was the filter eater...I noticed inside the Nissan airbox some seeds and other mouse foods...was that filter compromised by mice?
    6
  40. I have pulled cotter pins out of my tires....I now know how they got there.
    5
  41. Teaching moment, you do not need to start a car to see the mileage!
    5
  42. Ray is always doing the pledge of allegiance in his mind.
    5
  43.  @RainmanRaysRepairs  O Ray...you really think people checked their tires before TPMS??? I don't think the Ford Explorers had TPMS. I am going to wager that most of the TPMS lights come on right after the first cold snap.
    5
  44. Did I miss the master cylinder diagnosis??? You did not bleed rears????
    5
  45. There is a difference between the blue and red loctite...use red when you hate the next guy.
    5
  46. I kinda agree, but the fact that felt bad while driving would be enough for most
    5
  47. Do you have an electron drain pan? From what I have heard no one will take used electrons.
    5
  48. Hey Ray, in your edit, the 2nd time playing the music, the level was way to low...first time was fine.
    5
  49. I would really like a standardized safety clip for the electrical connectors...not only are they different between manufactures, but under the same hood you have like 3 different safeties. When you are impatient they tend to get broken....this comment has almost nothing to do with the video.
    5
  50. What's with the top/bottom and random blur? I don't think it's a Florida thing.
    5
  51. with @Sarah n Tuned I can tell when she films videos based on her nail polish. Ray always paints his nails the same color so time is an amorphous concept in his videos...is this before the jeep asphalt crawler? Is this after a trip to Ocala?
    4
  52. Why doesn't that battery box have a lid? Seems like they would not corrode as fast if protected from Florida.
    4
  53. 8:58 Snake skin stuck to the headlight bezel. that is awesome.
    4
  54. that Audi has a lot of flavor. @Customer States What!?
    4
  55. WAWA steak and cheese...you must play Russian roulette with all six bullets in the chamber.
    4
  56. 13:10 not just trucks...don't cut anyone off just to make them slow down. That is the dictionary definition of dick.
    4
  57. Ray, it looks like there is another person working in the shop....
    4
  58. please film that angry bird.
    4
  59. Are you asking for comments on the intro? If so....I can not say anything nice.
    4
  60. One shock???? How cheap is this insurance company?
    3
  61. 10:00 Aluminum Oxide is very interesting...unlike Iron Oxide as soon as the exposed aluminum creates a complete oxide layer, the corrosion stops....don't remove the white powder as that is the best method to stop the corrioson.
    3
  62. Body shop welded ball joint after crash? Based on all the overspray, it would seem after the mustang spun out into the curb leaving the car show it muffed up the ball joint/receptacle??
    3
  63. Injector 4 read 2.7 ohms, and 3 read 16.6....I don't think it is the ECU.
    3
  64. someone stole the foam noise suppressor tape from that box...it's gonna rattle.
    3
  65. Let's just call it a sunroof.
    3
  66. Is the mount that this bracket is being bolted too loose? 37:02 I looked like the front bolt of the mount was not torqued down when you installed it....
    3
  67. that is crazy...anyone can go on the snap-on website and order anything...seems like that salesman did not want a sale.
    3
  68. Yikes...just had to replace the compressor on my car for the first time...1996 Buick Roadmaster. I made it a few months past warranty.
    3
  69. The diagnosis is 96% of this fix....it is like painting a car, the spraying of the paint is the easy part, the prep is where the money is.
    3
  70. grrrrrrrr...those worm gear clamps do not account for thermal expansion....this puts the job of expansion/contraction all on the shoulders of the hoses' flexibility...and that hose is old and stiff.
    3
  71. i want to see the tool truck guys face when you give him that kmart torque wrench for calibration.
    3
  72. Ray where does the rail industry get their oil? Where does the long haul trucking industry get their oil? Where does the shipping industry get their oil? Are you saying the world is about to come to a stand still?
    3
  73. It is a diesel, you are supposed to fill the filter with urine prior to install.
    3
  74. What ever happened to the dead I think it was a corolla you took home to take apart? The one with all the bugs inside...
    3
  75. for those of you watching on a phone...you should see these videos on a TV or some other larger monitor in 4K...every time Ray loosens a bolt you can see some Florida spray around. It is very immersive.
    3
  76. Minivan, the car that SUV drivers really "need".
    3
  77. Looks like that Yellow Jeep was in the shop longer then the dodge.
    3
  78. Ray, if you like Coffee in a can, you really don't like coffee.
    3
  79. isn't there a tool that goes in the center of that oil filter housing to drain the oil from it...before you loosen it???
    3
  80. Jesus, bumper fluid is expensive up north, and yet Florida Man just dumps on the ground...WTF?
    3
  81. Jesus Ray, in the past two days you are averaging 10k subscribers a day.
    3
  82. 29:36 Did you tell them about the ruptured sidewall in that tire? right above the A in T/A.
    3
  83. They did, and they are...Pontiac G8 and Chevrolet SS.
    3
  84. did I miss the purpose of that goombah plug connected to the OBD port?
    3
  85. Hey Ray, have you ever cut open a bad coil to see exactly what fails in them?
    3
  86. a layer of excel film (or any other brand) when the car is new, $35, prevents all of this.
    3
  87. looks like someone hijacked the last minute of your video.
    3
  88. I prefer to solder with a plasma cutter.
    3
  89. Any shop that plays the Go-Gos is my kind of shop.
    3
  90. 9:47 there is a puddle of water under that battery.
    3
  91. Never buy old rental cars...the no smoking sticker is the clue here.
    3
  92. This distributor install is making me stressed out.
    2
  93. The matte finish on the rear bumper looks much better than the shiny finish on the front.
    2
  94. I am probably going to get some sh*t for this...or no one will read it...I love Ray's videos. He does an awesome job. I would probably buy him a beer if I were in Florida-stan...but why are people sending him free tools? Take a look at as video views/subscriber count. You should send tools to Peter via Ray...Ray does not need free stuff, while Peter could probably use the help getting started...
    2
  95. 4:12 the horn is blowing in the wrong direction.
    2
  96. What is that drain/vent tube mounted on the crossmember you had to remove?
    2
  97. Why has Ray been banished to the parking lot????
    2
  98. wait, wait, wait...did you replace an aluminum control arm with a steel one?
    2
  99. Ray writes his exclamation marks backwards....from the bottom up...
    2
  100. 4:57 just gonna ignore that door seal? OOOOO it is the hose! Thanks Chris!
    2
  101. it seems like there is money to made if you are a tool builder and can make some type of engine/transaxle/subframe jack/stand combo.
    2
  102. That diff cover has provisions for a cooler (or is that just two different fill positions???)...I guess we know what your next job on this truck will be...and if I were the owner I would get the remote shock reservoirs mounted in a less vulnerable spot.
    2
  103. Looks like someone in your shop was the last guy with that filter....
    2
  104. I am only at 3 mintues, but my first question is, WHY was it rubbing?
    2
  105. More manufacturers need to make access panels above the fuel pump...this is so much work for a simple task....for comparison, my subaru had to bolts to remove back seat, seat bottom, and then a nice little panel above the fuel pump.
    2
  106. When you wrote 200...I was yelling "OUT OF SPEC!"
    2
  107. That torque wrench is a fail. It takes too many button presses, additionally it tells you that you have reached dialed in torque...before you reach the dial in torque, I realize there are two tones, but the final comes on prior to desired torque. That Kmart torque wrench you have has a better HMI (Human Machine Interface) design then that gearwrench.
    2
  108. The next guy is going to find that heat shield and ask many questions.
    2
  109. Don't tell them they are overloading the vans thereby causing twice the number of suspension rebuilds....good life rule; Determine the size you need, then go at least one size up....except with condoms, that is the inverse.
    2
  110. I do not think the world is to blame for this individuals lack of funds...their life choices have a lot to do with it...like buying a 70K car when they have a 25K budget.
    2
  111. Baby Buddha cries every time someone paints their diff cover. Don't make Baby Buddha cry.
    2
  112.  @ajwilson605  and everyone that did a dukes of hazard jump broke.
    2
  113. 25:30 there is an impact gun under there!!!!!
    2
  114. Thanks Ray for letting us know the hours...The price irrelevant, but the hours are a good thing to know.
    2
  115. That plastic is only ever under compression. That is a pretty ingenious solution. This a jeep liberty. It is not an offroad vehicle.
    2
  116. don't you need to turn off the air suspension before you lift the car?
    2
  117. ohhhhhhhh....every time the pliers go on the tie rods right next to the spot that is made for a wrench.
    2
  118. Interesting side note, the first draft of the declaration had an entire paragraph condemning slavery. Obviously the southern delegates wanted no part of that...but there were some New Englanders as well that would have taken a hit by losing the slave trade...but man we would have been nearly 90 years ahead if they were thinking with their hearts and not their purse strings.
    2
  119. the whole point of a K&N filter is they are EASY TO CLEAN.
    2
  120. You should be able to get scraps from the stone place next door and build something in the shop.
    2
  121. that one coil looks like the parts guy needed just one and did a swap...
    2
  122. ending on a cliff hangar!
    2
  123. Ray, I am sure you have some string and some levels....Troy needs to learn how to do an alignment the hard way.
    2
  124. PSA, do not drive with placards hanging from rear view. That creates a huge blind spot.
    2
  125. Its been a while since I messed with electric R/C...chop off the noise capacitor and see if that fixes it...the capacitor may be going bad causing a short to ground....
    2
  126. Do you recommend hood struts to the people who have blown out struts? I am guessing they say no, as they never open the hood...because if they did they would replace them immediately.
    2
  127. You are going to really hate how Tesla's learn where potholes are, record it, and upload that info into a database so your tesla will know when it is about to run over a pothole and adjust the suspension accordingly.
    2
  128. Check this out, 2013 Chevrolet Sonic RS, 80K miles...man that sounds like the timing belt is about to go; I have no interest in doing that job, take it to shop...your timing belt is fine, but all three of the engine mounts have loose bolts...so after 9 years they worked themselves loose....bizarre.
    2
  129. technically speaking this video took me back in time...just not as far back as the first. Are we using Back to the future time travel rules, or Star Trek?
    2
  130.  @RainmanRaysRepairs  now if this was a customer with limited means, and it was their primary method of transport...or similar story, I would be more inclined to help...
    2
  131. O GOD, the Nasty that drives that van is a dipper, you can see it on the wheel and the seat. Ray you need to decon buddy....or maybe it is just the sewage that this guy pumps...that's not so bad.
    2
  132. exhaust pinhole leak repair???? When did that happen?
    2
  133. When are you working on that Fiat X19?
    2
  134. Lights mounted on back wall facing down at about 45 degrees, depending on mounting height, provide light which is never blocked by an open hood.....I have a halo of lights in my garage...it is nice.
    2
  135. May be worth having a conversation with the man child about why he is jealous of your videoing. He could probably use a hug.
    2
  136. 30:05 please tell me that was on purpose.
    2
  137.  @edifyguy  I must say, that is good info on JBweld temperature limits.
    2
  138. If your shop instructed another mechanic to do the compressor swap, you need to find another shop. I am guessing they didn't.
    2
  139. I had a bad feeling about all of this as soon as you started reading is odd requests.
    2
  140. OK, time to bore it 30 over.
    2
  141. That tape has been on the quarter for a long time...guessing they cant afford the deductible on the insurance.
    2
  142. the bushings in those lowers could have been replaced.
    2
  143. He has done one...search his prior videos...it was only a few months ago.
    2
  144. hmmm, High pressure fuel lines steel or aluminum? I would upgrade to titanium, swage should hold up better...o wait, you probably don't have to make those.
    2
  145. OOOOO...I bet the windshield guy did not re-install correctly.
    2
  146. 53 minutes!
    2
  147. OOOO...a treasure in the parking lot 18:06...You should have put that green valve stem cap on the jeep...really blow her mind with a single Nitrogen filled tire.
    2
  148. That Florida Man did not hear any of your words after, it blows cold.
    2
  149. Sure to climb all the Florida curbs with ease
    2
  150. small Ray works faster than big Ray.
    2
  151. I do not understand why there needs to be a remote tech to download software, and then upload software...this seems like something your snap-on computer could do...or any laptop. I am sure there is some arcane reason...
    2
  152.  @RainmanRaysRepairs  ahhh subscriptions..... It makes sense now.
    2
  153. How much longer till you make that gate powered?
    2
  154.  @kenore4003  neither does the space he is working in.
    2
  155. 21:10 I am laughing at your fortune...that was great.
    2
  156. Does your recycler require you to separate your waste oil and brake fluid/trans fluid?
    2
  157. How many trailers do you need Ray?
    2
  158. Good luck on the plastic bumper pieces, they could not even survive 15 mild climate summers...There is lots of stuff out there for G Bodies...turn it into a Grand National clone...
    2
  159.  @serenap.1041  Just checked...they do! GN110475...$740 for all four.
    2
  160.  @serenap.1041  If I remember right, that diesel was an attempt by GM to take a gasoline small block and turn it into a diesel...which explains a lot...this was also when they first expieriemtned with cylinder deactivation on some Cadillacs...that ended in a class action law suit.
    2
  161. 31:45 I will give him a hug. He needs some positive affirmation.
    2
  162. I am having sympathetic frustration pains in my gut from watching that line going in.
    2
  163. Ray, you must have a lot of back log videos from the dealership.... Curious when your shop will be up... Excited to see progress.
    2
  164. 9:15 the smoke from the previous day seemed to be the nail in the nail of the coffin.
    2
  165. For what its worth, your heat gun would have been useful in getting the plate holder to fit better.
    2
  166. a good case of more car than you can afford.
    2
  167. Wow, even his key is red.
    2
  168. you need a paint pen set to replicate the factory QA marks on the new parts.
    2
  169. This owner plays a lot of Genshin Impact...the game those characters are from.
    2
  170. bold choice, installing new window switch block BEFORE testing.
    2
  171. please state name of that business which owns that truck...need to make sure I never hire them.
    2
  172. I would never trust the owner of this van to do whatever work he does with this van. He will do bare minimum and get mad if you point it out.
    2
  173. WTF is growing in that cup holder???? People please have some dignity.
    2
  174. Why would anyone want to shoot a bear?
    2
  175. that pillow looks like a dis-embodied leg in the passenger seat.
    2
  176. 7:55...that lift arm appears to be crushing the rocker panel.
    2
  177. Wait, do these people also think the surgical rooms in hospitals should be decked out with harbor freight equivalent equipment?
    2
  178. Ray, you have replaced car and driver as my throne activity. You sir are now in the Big Leagues....but I am gonna need you to cut these back to less than 10 minutes.
    2
  179. OSHA approved welding gloves. 29 CFR 1910
    2
  180. You left the debris in the windshield grate...I remember a time when you would clean that out.
    2
  181. 25:00 They make metal zip-ties.
    2
  182. For the UK mechanics, the annual inspection requirements for cars are much less rigorous for cars in the US, or in Florida non-existent compared to your requirements, from what you have seen in Ray's videos can you tell if cars on your side of the pond are generally in better shape?
    2
  183. was this the dealership...or the new place?...should watch the entire thing first...
    2
  184. You discovered the ONE good thing about 20 inch+ wheels.
    2
  185. Are you partnered up with an auction buyer?
    2
  186. we are missing a video where you injured your hand....
    2
  187.  @RainmanRaysRepairs  Get better soon! those kinds of injuries can fester, and turn into something real serious.
    2
  188. Ray, I am serious about checking for the tick bite, your symptoms sound a lot like Lyme disease.
    2
  189. I am guessing that truck was put into 4-wheel drive the day it was bought, and has not been back there since.
    2
  190. Ridgid power tools are built by Milwaukee.
    2
  191. Flashing AirBag light?? That was not tripping a code?
    2
  192. Hey Ray, is the compressor manufacture eating the labor cost, or is your shop?
    2
  193. ewwww...who has dental floss sitting in the car...that means they floss their teeth IN THE CAR.
    2
  194. 0:30 that is on the Florida state Flag.
    2
  195.  @DaylightDisinfectant  its 2021, more than zero is a lot...he has three..
    2
  196.  @frandanco6289  Thanks Fran. I guess your reading comprehension is a little off, or you are just an rude/angry person. But thank you for your eloquent and insightful observation. Now go find someone to give you a hug....and just for clarification that filter was not installed upside down.
    2
  197. https://shop.snapon.com/categories/14.4-Volt-Ratchets/760538, and https://www.ridgid.com/us/en/octane-brushless-4-mode-impact-wrench
    2
  198. 15:30 were you working on a farm truck? There is 50lbs of dirt on the floor.
    1
  199. Blame it all on the mouse that lives on the engine.
    1
  200. If it fits it ships.. That is USPS priority mail boxes.
    1
  201. the leaves...get the leaves out of the battery box!
    1
  202. Hey Ray...these Stellantis videos are only in 1080p...
    1
  203. Ray, please identify cars with Pelican Cove or Bay village stickers...I am going to guess those tend to have more corrosion than other cars...
    1
  204. Ray, what is up with that black briefcase?
    1
  205. WTF does a painting consultant do?
    1
  206. That jeep is ready to light up the curbs in the walmart parking lot...
    1
  207. a car with an MSRP of around 100k when new should not be treated like a hyundai, and parts are not going to be priced like a hyundai. I think people need car buying lessons.
    1
  208. The ever present sound of stone being cut....has that started to get to you yet?
    1
  209. to increase oversteer, rear PSI up or front PSI down....opposite to increase understeer.
    1
  210. The Subaru's built in Lafayette Indiana are not built in Japan.
    1
  211.  @handbananaistherapist642  No??? so the subarus built in the Subaru assembly plant in Indiana, are not built in Indiana? Where are they built?
    1
  212.  @handbananaistherapist642  indeed it is, I said the Subarus built in IN are not built in Japan, your sentence starts off with the word No, implying that I am wrong, then you do a non-sequitor about money.
    1
  213.  @handbananaistherapist642  That is pretty weak I am sure you can do better, try again.
    1
  214. according to Lexus, the plural of lexus is lexus.
    1
  215. And since they made up the word, they can make up the grammar for it...I think the word was supposed to be an amalgam of Nexus and Luxury...very japenglish word.
    1
  216. Were any of these non-franchise stores? I suspect a small store would be different...Keep this in mind when you shop at china-mart or any other big box store...low prices have consequences.
    1
  217. Did Florida get rid of school Buses?
    1
  218. My guess is you have more in your lungs, then on the fender.
    1
  219.  @RainmanRaysRepairs  PPE!!!!!!!!!!!!!!!
    1
  220. Is Peter from Boston? And the customer service woman, she must be from Philly...or Baltimore...or the eastern shore of Maryland?
    1
  221. a better appearance...you do not know ho many comments I get about how the inside of my tires look...I spend hours cleaning them weekly.
    1
  222. Does your shop have access to all of the manufacture shop manuals? There must be some type of subscription...seems like it would be helpfull to read ahead to get an idea of what you can/can't should/shouldn't do?
    1
  223. I was sure you were going to use the welding torch for the heat shrink.
    1
  224. Yeah america...get sick and then hope people on the internet will pay the bill, that in most of the rest of the first world would be covered...but yeah, capitalism is soo good....your health is a commodity. Sorry to hijack this, but this shit is so stupid. Hopefully this guy gets better....O one other thing, if you are going to pray after the fact, try praying to make sure people don't get sick or shot or whatever instead of having to pray for them after it happens...see how that works.
    1
  225. I am with you Ray, we have a tad too many people, and the globe would benefit by killing off the weak and meager...who knew it would be so easy...just a bunch of us standing up for our personal liberties, we kill a good number...and if some don't die and have some lifelong after-effects, we will thank them for their sacrifice....youtube sarcasm tag is currently broken.
    1
  226. 8:00 that brake hose flex's when you start the engine (guessing that was when you manipulated the brake)...seems like that bracket dangling in the wind should be attached to something.
    1
  227. sell them a bottle of leather cleaner.
    1
  228. those cult palms hanging from the mirror will protect it.
    1
  229. If it starts in toyota you can end it with driving appliance.
    1
  230. Hot wire to fan...so the compressor turns the fan on.
    1
  231. Has someone really mentioned the fact that you are burning the customers gas? If so I would like to tell that person that they are wasting my oxygen and I demand they return it.
    1
  232. According to Lexus, the plural of Lexus is Lexus.
    1
  233. Tell your buddy not to eat anything purchased at a dollar store. That is never a good idea.
    1
  234. That RIDGID has a lifetime warranty...but only if you registered it.
    1
  235. Did anyone tell the owner that he probably did not need four O2 sensors?
    1
  236. Did this thing have a florida plate? Is their parking spot in the Gulf of Mexico?
    1
  237. Ray, the "powers that be" who control the price of your diagnostic hour are not some nebulous far out group...it is whoever owns/runs your shop.
    1
  238. Has anyone done a scientific comparison of the chain store rotors vs OEM? I would venture a guess the chain store top end rotors are not as good as the OEM...but I would like to see an actual comparison.
    1
  239. OMG, over 60 minutes!?!?!?
    1
  240. play at 1.75 speed.
    1
  241. Curious, how frustrating this troubleshooting would have been if you had not previously worked at the Chevy dealer.
    1
  242. only in florida, Lambo's dont need license plates.
    1
  243. What flavor of steering wheel schmoo is that?
    1
  244. If you have been trying to hide the name of your shop...well not anymore!
    1
  245. was the window regulator a pain because it was on a back door?
    1
  246. that coolant overflow tank does not have a cap.
    1
  247. The glass is fine, but that upper-fwd trim panel looks like it is out of place...
    1
  248. Of course the guy with the penis lift kit can not replace the oil sender....while there are lot little steps none of them are as hard as climbing into that truck and having it make you feel like a man.
    1
  249. hmmmm the lack of "4th" gear seems to effect their gas mileage...does it still go into overdrive automatically, and that switch just forces it?
    1
  250.  @bruceb4349  Thanks Bruce...that makes so much more sense that what I was thinking....the only car I have ever had with that switch was a 68 MGB GT....not the best tow vehicle.
    1
  251. The data on pet caused accidents is very weak...most of it is conjecture developed by a pet safety product company, then repeated about 1000 times on the websites of personal injury lawyers...I will not give them the clicks here. As for actual data the only thing I came up with is a researched performed in 1984, with data from 1975...and all it tells you is types of injuries suffered by dogs. There is an LA times article from 2011 talking about it...not sure how YouTube does not likes links; look up LA times article "Experts warn about the dangers of driving with unrestrained pets in the car" Hawaii is the only state to have a law about driving with a pet in your lap...at least that was the case in 2011...Oregon was going to vote on one as well... Big take away, hard to police loose pets, people who crash because dog distracted are not very likely to admit that is what happened....and most conservative legislatures will never vote to require pets be restrained.
    1
  252. early morning posts are similar in grammar to drunk posts...but I aint gonna fix it.
    1
  253. O god...I have a '96 B-body, it looks like new compared to that thing.
    1
  254. This is the problem with America...I put Gasoline in my Diesel...FORD you will fix it for me for free, because it is your fault, not mine.
    1
  255. I love 4k videos...but man what is with Florida people and all the food schmoo on their steering wheels?
    1
  256. 36
    1
  257. baby jesus says to put an outlet cover on that outlet behind the press...and next time tape off the outlets when you paint. He is also concerned about the fact that there is a hole in the wall for an extension cord. Florida.
    1
  258. that maxima altima sentra has seen more off-roading than all of those Jeeps you were working on.
    1
  259. the blinker will light on the wheel whose turn it is to learn.
    1
  260. Your lift is overdue for its annual inspection...like 2 years overdue.
    1
  261. wheel angle and directional alignment
    1
  262. Where do cars go to college?
    1
  263. 37:20 wrap some foam around it! or even a thick layer of electrical tape.
    1
  264. Is that cap covering the attachment points for an oil cooler? With all that work, I would have added the oil cooler.
    1
  265. there is a decal somewhere under the hood showing the belt orientation.
    1
  266. good feng shui.
    1
  267. was that positive terminal bolt crossthreaded?
    1
  268. Ray, how do you touch the inside of that car with your bare hands?
    1
  269. Harleys try to kill you. Buy a Ducati.
    1
  270. This car is owned by an angry old white male.
    1
  271. I just bought a battery....six months ago.
    1
  272. 29:00 did someone write OK on the bottom of the seat rail with sharpie?
    1
  273. Interesting buy, the money pens....
    1
  274. 7:50 angry shop monkey?
    1
  275. 2:25...do i hear a music overlay?
    1
  276. everyone sounds the same when played in 2x speed, weather you are a "snowflake" or a someone suffering from microphallus therefore requiring them to call others names like snowflake.
    1
  277. That diff looks like it has been removed before...how in the hell does that braket braket get bent?
    1
  278. hopefully the landlord will do something about all the mold on your ceiling...
    1
  279. 51:45 Clamp from intake tube to air filter box....next to MAF....hahahahah nm.
    1
  280. Could some of those Banks products have a slight parasitic draw???
    1
  281. a joint like that negative wire would benefit from something running the length of the crimped joiner and wire ends to act as a stiffener under the heat shrink....like a popsicle stick. (overkill baby)
    1
  282. 1:20 looks like jeff gordon forgot his car.
    1
  283. you steve miller like $2.87.
    1
  284. That aint no Florida car.
    1
  285. I think it is time you put your kid to work...bicycle parts pick up.
    1
  286. sprinkle some seeds around the shifter, I bet they germinate in a week.
    1
  287. I hope Stew was fired.
    1
  288. Station Wagons bro...they do truck stuff, and mini-van stuff...all while being a car.
    1
  289. call safelite about that windshield.
    1
  290. if you really need a gate, switch to a sliding gate
    1
  291. I have some thoughts, customer probably did the math, and figured it was cheaper to fix in Florida, then where ever they are from in the North East....and they probably decided they wanted to have AC on the drive home.
    1
  292. No Ray I believe I am me, you can not be me, unless I am you...which I am definitely not...unless it is Tuesday
    1
  293. 2:27 where is my xfiles music?
    1
  294. 15:11, dye on the subframe, right at the crossmember joint?
    1
  295. 1:20, that bug is not on your screen/phone.
    1
  296. that seemed like a good job for an easy out.
    1
  297. All this because a jamoke/goomba thought those sensors hold the engine up.
    1
  298. 22:04 what is he doing to that kitchen remodel truck? Should we be worried?
    1
  299. I am going to suggest you do not set-up the desk with your back to the door.
    1
  300. good god, after market power windows??? wtf?
    1
  301. I know he knows you drain the oil via dipstick hole.... Nope he doesn't.
    1
  302. good thing it has a snorkel.
    1
  303. nice usage of thermal camera...does that thing have a memory card slot?
    1
  304. You pour with two hands ever since you got the gopro...
    1
  305. LOOK AT the nose nuggets on the back of that steering wheel!
    1
  306. I wonder if that owner is a patriots fan.
    1
  307. Saving money on lost cost parts is very expensive.
    1
  308. motor: a machine, especially one powered by electricity or internal combustion, that supplies motive power for a vehicle or for some other device with moving parts. engine: a machine with moving parts that converts power into motion.
    1
  309. Give the truck away to subscriber 200k.
    1
  310. 4:25...bye nut!
    1
  311. Bumper Cover, or Front Clip...not Bumper.
    1
  312. OK, since you took their trailer, their toaster, and their trash, as well as a box of poop pants I am assuming your wife's parents are the source...when do you get the boat?
    1
  313. “Reeeeee”
    1
  314. Customer needs a pair of blue blockers.
    1
  315. OK, here is the lazy guy question...could you have accomplished the same thing by driving around the parking lot with the parking brake lightly applied?
    1
  316. That car needs a headlight restoration
    1
  317. 4:26 you are displeasing the spider that was living in the leaves around the back battery mount.
    1
  318.  @kirara2516  yeah, go back from my stamp a few seconds...you will see it moving around...the think the brake cleaner at the end did him in.
    1
  319. But did you put the dust boots on the bleeder nipples?
    1
  320. unpainted bumper, non opening hood...hmm wonder what happened.
    1
  321. 29:45 OSHA reg 356.7
    1
  322. Man when you zoom into a clip near the glass my sphincter puckers in anticipation of many little glass cubes.
    1
  323. never trust a human that rides around with multiple bottles of Listerine.
    1
  324. 44:50...mark the holes take it off and drill it????
    1
  325. What does that "truck" do? Is it just for looks?
    1
  326. what are these tight tigers?
    1
  327. As others have stated, i think the easy way is install a wet oil pressure gauge in line with one of the oil cooler lines.
    1
  328. If I recall it was not a BMW part??? Doorman? They are the walmart of car parts.
    1
  329. that is one clean minivan.
    1
  330. Who is ripping this guy off with nitrogen in Florida?
    1
  331. good thing Iron Oxide is not carcinogenic.
    1
  332. Vacuum your wife's car.
    1
  333. Wait....did you mention that you were not looking at the CEL?
    1
  334. This video made me pee.
    1
  335. Where is the Filter??????????
    1
  336. Some info on rodents...and these are mice not rats...as long as there is food source mice will not eat your wires. You can imagine a nut is lot tastier than a wire...and unlike gerbils/hamsters mice and rats do not chew things to keep their teeth in check, they actually grind their teeth. Biggest problem for rodents is in northern climates when food is scarce, and engine bays provide a nice warm environment with a meager but better than nothing food source. Easiest way to avoid them living under your hood is to leave the hood open if the car is not driven for a while. Rodents like to hide.
    1
  337. Tears were shed upon seeing the car quest filter replacing the Yota OEM filter.
    1
  338. 0:27 I would have eaten it.
    1
  339. That tire noise sounds like you are sitting in a quad-copter.
    1
  340. Desantis would be proud! It is my RIGHT to pose bodily harm to all around me. How dare you infringe on my right to be stupid.
    1
  341. 6:00 those puddles of oil al over the valve cover...hmmm
    1
  342. Ray, I pose a challenge to you, go one month without shopping at China-Mart.
    1
  343. Does all data let you CTRL+F?
    1
  344. Reflective. It just happens to be UV Reflective.
    1
  345. based on the music in this shop, Ray is now the oldest guy....the other shops I am pretty sure he was the youngest....i typed that before the DJ comment. Wait its now lynyrd skynyrd...ray moved to Jacksonville.
    1
  346. Sand Hill Cranes mate for life. They are pretty cool.
    1
  347. What abut the scoring on the input shaft?
    1
  348. You should sell them a wheel center cap.
    1
  349. that guy in the dodge is trying very hard to increase the size of his penis.
    1
  350. Why do the customers decide to keep them? Not that hard to zoom by and hand it to you....the thermometers....
    1
  351. Happy Kwanzaa Day 2 Ray! Kujichagulia...self determination.
    1
  352. perfect opportunity for a manual swap.
    1
  353. Do those bumpers give the option of stainless hardware?
    1
  354. The backup camera did come on when you backed out of the garage..looks like you need to be rolling.
    1
  355. I was hoping the Snap-On thermal imager was going to be used. I think the first step of your new diagnostic procedure should be scan car with thermal imager.
    1
  356. it sounds like a diesel Oldsmobile.
    1
  357. Ray has proven the need for a flashlight with a more powerful magent.
    1
  358. What's that I hear???? O yeah, someone's counter being cut.
    1
  359.  @damonzilliox2751  stone business next door...
    1
  360. 10:30 +50 for Rob Zombie.
    1
  361. If you live in a Camper, why wouldn't you leave before the Hurricane comes?
    1
  362. understanding this thing is 25 years old, but it seems like those bushing have had a lot of fore/aft movement over time...people really yank on the shifter when shifting. Be Gentle.
    1
  363. it is so long the gopro lens makes it look bent.
    1
  364. Ray loves the Sand Hill Cranes...fun fact; they mate for life.
    1
  365. Stellantis.
    1
  366. I am on a roll.
    1
  367. The aft water pump hose does appear to have signs of leakage....or is that residual from the front????
    1
  368. Ray, just remember to NOT mark the places in your yard where you are burying the gold and silver.
    1
  369. Ray, you just hit 300K.
    1
  370. 1:26 O GOD WTF IS GROWING IN THERE?
    1
  371. I noticed you guys have a stack of K&N Air filters....
    1
  372. How many people buy houses without an inspection?
    1
  373. you get 4.8 points for the Ree sound effect.
    1
  374. Ray, why is your truck in one of the Bays?
    1
  375.  @edifyguy  read your first sentence.
    1
  376. it matches the floor of the shop
    1
  377. loud enough to appreciate, quiet enough for the algorithm not to care.
    1
  378. How are those shocks not bent?
    1
  379. Reed Richards would make a great mechanic.
    1
  380. I hope you choose a POS that integrates an online scheduler...
    1
  381. sounds like no one is using the battery tender that is sitting in the glove box of that fork lift....
    1
  382. based on vehicle condition I am betting owner is not spending money to repair.
    1
  383. I think space may be an issue in your shop, but have you ever thought about some sort of divided tray to put all the hardware in when you take stuff apart??
    1
  384. 18:40 this situation generally results in nut shrinkage.
    1
  385. 43:40 re-use of nylock nuts.....hmmph.
    1
  386. But Ray, you film with a mirror so everything is double backwards.
    1
  387. With video sped up how do you avoid a chipmunks copyright claim?
    1
  388. And that is how you cheat emissions!!!
    1
  389. Ray is your last name Mond, or is that a walmart special nametag?
    1
  390. Ray, are you the lead mechanic here? Seems like there may be some value in doing some type of shop training a few days a week...do a safety stand down for like 30 minutes two or three times a week? Owner might not like it because that is not billable time, but the backside potential in savings is huge.
    1
  391. lack of context makes these videos interesting.
    1
  392. as soon as the camera was put behind the muffler...you can tell, no cats...they did not even bother putting "test" cats on it....pretty lazy work....and a simple ECU retune would eliminate the cat codes.
    1
  393. some predictions..based on the fact that he paid you to loosen two nuts...you could have disconnected the anti-sway bar, and he would not notice...and you would eliminate the clunk. replace them with poly bushings that have grease fittings are greaseable.
    1
  394. Ray you could easily do a solar system with battery backup...throw in a starlink and you could be nearly free from the grid and cable company....your property is big enough you don't even need to put in on your roof...you can do a remote setup that folds up to be hurricane resistant...
    1
  395. I was filled with pride and Joy when Ray used the heat gun to shrink the heat-shrink.
    1
  396. O GOD, you sat in that CAR? You need a Tyvek suit.
    1
  397. video back to 4K.
    1
  398. Here is the text of the deleted slavery paragraph from the Declaration of Independence. He has waged cruel war against human nature itself, violating its most sacred rights of life and liberty in the persons of a distant people who never offended him, captivating & carrying them into slavery in another hemisphere or to incur miserable death in their transportation thither. This piratical warfare, the opprobrium of infidel powers, is the warfare of the Christian King of Great Britain. Determined to keep open a market where Men should be bought & sold, he has prostituted his negative for suppressing every legislative attempt to prohibit or restrain this execrable commerce. And that this assemblage of horrors might want no fact of distinguished die, he is now exciting those very people to rise in arms among us, and to purchase that liberty of which he has deprived them, by murdering the people on whom he has obtruded them: thus paying off former crimes committed again the Liberties of one people, with crimes which he urges them to commit against the lives of another.
    1
  399. I watch you at 1.5 speed....you do everything 50% faster.
    1
  400. "slightly off", I am pretty sure that is Doorman's Logo.
    1
  401. At least this is a truck made as an actual truck....but man 184K miles...that thing is missing some rust. Please advise customer that you need to apply liberal coats of rocksalt and water to the frame of this truck.
    1
  402. time for some HD dash cams!
    1
  403. live commentary; maybe those adjustable brackets should be fully tightened yet? I guess we will find out in 10 minutes....it did not matter.
    1
  404. Ray, time to get a SLR. These sports cameras are not meant for close up
    1
  405. Pretty sure your shop does free estimates???
    1
  406.  @UTubeHandlesSuck  yeah I only saw two. I should pay more attention.
    1
  407. Find the IMSA twitter account and go to January 26, there is a tweet showing a brake job on a race car...
    1
  408. Youtube premium...WTF are commercials?
    1
  409. Are you trying to hide the Autozone name?
    1
  410.  @RainmanRaysRepairs  Fair enough...first time I have seen you blur out brands...you have given Car Quest more screen time than any other medium they use....
    1
  411. Technically "Declaration of Independence Day". The war was not over until the treaty of Paris, Signed September 3rd 1783.
    1
  412. I would have left a note for the next guy inside that plastic wire loom.
    1
  413. what are those needle nose pliers with the grip guard?
    1
  414. There is a dead snake under the center console. Please find it before it starts to smell.
    1
  415. Mice...they are mice not rats...and they will only turn to the wires when they run out of real food...and it appears they have a healthy supply of food from wherever that car is parked. And before someone says it, mice do not eat things to control tooth growth, they grind them....they are not gerbils/hamsters.
    1
  416. people that buy amsoil or royal purple are not paying someone to change their oil....are they?
    1
  417. What is the card slot under the HVAC temp knob?
    1
  418. I would have liked to see a 90 degree connector on that pig in tail... The only thing I can see that needs a more elegant solution with that cover is the wiring situation. That would have made this perfect...
    1
  419. the first minute and half of this video is for people with Capri Pant fetishes.
    1
  420. in the order of engineering priorities, repair is generally very far down the list....don't blame the engineers, blame the Program Managers....
    1
  421. Order ahead....firehouse subs also known as bowl splatter material.
    1
  422. I would hate to see your toothpaste tube...squeeze from the middle...what are you a savage?!?!!?? ;-)
    1
  423. That Fiat X19 needs service...please work on it.
    1
  424. Having seen this thing in the background of other videos I knew how this was going... Ray, have you thought about numbering/indexing your videos???
    1
  425. some odd light/frame rate interaction....dark waves rolling vertically on the screen.
    1
  426. Did not replace tensioner??? It seemed a bit wobbly.
    1
  427.  @kaptainkaos1202  If you were teaching at Millington in 1990, I would have been a student...
    1
  428.  @Anactualrealperson  not anymore.
    1
  429. expensive is very relative. The sunk costs in this truck are growing.
    1
  430. Station wagons look weird now.
    1
  431. looks like that car needs a brake light as well...according to the service message it displayed when you shut it off.
    1
  432. screw clamps do not account for thermal expansion/contraction. You just killed a small part of my soul by ditching the compression clamp, and snipping the nipple.
    1
  433. Dyed Beard guy looks to be a new employee???
    1
  434. Just a guess; based on the fact that this is a painters truck, was it a language barrier at the service writer?
    1
  435. please show the customer how to link their phone with the vehicle...doesn't that thing have Android Auto/Apple Car play? The center console lid has a nice spot labeled CELL PHONE.
    1
  436. I suspect that rock at 7:56 may have caused some noise.
    1
  437. Who makes Amazon Oil? Warren Distribution makes the Amazon private label oil.
    1
  438. 14:30 Ray, that only applies to the northern hemisphere...don't forget about the other half of the planet.
    1
  439. There is a living breathing (barely) human that has no problem getting in that car.
    1
  440. 28:10 Are you guys listening to the hallmark channel?
    1
  441. a ree is still an engagement. the algorithm approves all engagement.
    1
  442. That guy was so determined to get paid, he wasted how much time? He knows how much the tow truck can carry, this is so Florida.
    1
  443. Back to 4K...thanks!
    1
  444. Sunny Nice day in Florida, driving a convertible...with the top up.
    1
  445. 27:55 CTS station wagon...the car many pick-up owners actually need...SAVE THE WAGONS.
    1
  446. Guessing you guys do free estimates. Then people shop around with the known problem.
    1
  447. did the heat exchanger come with a new oil filter housing?
    1
  448. Part number for snap-on 13 pc 3/8" Drive 12-Point Metric Ratcheting Crowfoot Wrench Set (8-19 mm) (Blue-Point®) BFCRM712A
    1
  449. are those the wheels you just took off the red mustang?
    1
  450. 15:45...nice.
    1
  451. That is not carbon fiber.
    1
  452. Please show me a robot welder welding a robot welder.
    1
  453. why is cylinder 4 coil different then 1-3?
    1
  454. The best kind of CO2 is the Tropical kind...that's how they make Mango Coke.
    1
  455. looks like it must down in the 60's in Sarasota.
    1
  456. the air 8 inches off the Florida ground is not know for being clean and dry. You need a snorkel.
    1
  457. I am guessing you did not mention the TPMS light because you want them to check the tire pressure manually.
    1
  458. 2023, who uses Facebook other than peoples grand parents?
    1
  459. Christmas music in general makes people mad.
    1
  460. CHECK PARK AID
    1
  461. That smoke would look really cool on a thermal imager.
    1
  462. Why is one AC Delco fuel filter white, and the other AC Delco Fuel filter Blue?
    1
  463. 1:52 Give that guy an Oscar.
    1
  464. Country music is so bad it makes pick-up trucks cry. 2:59
    1
  465. How come you drive around the front of the shopping center now?
    1
  466. This video is 1080, your old videos were in 4K....the zooms were very pixelated.
    1
  467. At least it is clean.
    1
  468. Did you walk the lady around the car and show her how hard that dealer screwed her?
    1
  469. But Ray are they taking money AWAY from you when you loan a tool (I can think of many other reason not to loan stuff)? You are giving away all your knowledge on this channel...I wont say for free, but you get the point...
    1
  470. @CJRock Hey CJ, that is not the point Ray was making, he used an investment analogy and implied lending his tools would cause him to lose money. If the guy in the stall next to you needs a Mark 4 Widget extractor , and you lend it to him because he has the Mark 2, how are you losing out on your investment? If I am about to schedule a brake job at Ray's shop, but then watch one of his brake job videos and see how easy it is and do it myself, that is money out of his pocket (less the 2.7 cents he earned for me watching the video). These videos are educational which by definition is the impartation of knowledge.
    1
  471. IS the blow-off valve leaky?
    1
  472. Hmmmm...no new Rotor backing plate?????
    1
  473. I did not see if the rotors were stop-tech as well....but if so, decent choice....ebay drilled/slotted rotors are bad...i have no idea if the old ones were ebay special or not.
    1
  474. If you dig through Rays videos there is one where he had to replace a busted rack....
    1
  475. If anyone is curious, the holes are for cooling, and the slots are for dissipating gasses/dust when braking hard...drilled rotors while fashionable are not really necessary anymore as the slots do the job, and as you can imagine drilling a bunch of holes in your rotors is not the best idea...race cars have moved away from drilled and only have slotted....they even put a sharp edge on the slots to gain additional bite.
    1
  476. You don't have a piece of old shop air hose to help with plug install?
    1
  477. Gates belts are the bomb...i have belt driven bicycle with a Gates belt.
    1
  478. Doorman is the harbor-freight of car parts, but Dura-last is like the Wal-mart...these seem like parts the ford dealer would have in stock, with so many of those station wagons on the road....
    1
  479. Ray, every time you talk about drinking coffee I feel a little gut punched, the stuff in cans is nuclear reactor cooling fluid, the k-cups are stale...and expensive...you could actually make real coffee one cup at a time in less than two minutes....
    1
  480. big chunky Dis-similar metal corrosion.
    1
  481. If you were an A&P there would definitely be a right and wrong way to solder. On a car, meh not so much...as long as it is a good, not cold joint.
    1
  482. I see mouse turds.
    1
  483. Curious, was that a warranty job? That truck looks very clean/low miles.
    1
  484. That O2 sensor harness is one tree branch away from being ripped off....is that what the zip ties were holding up?...OK, you fixed it.
    1
  485. looks like there was a puddle of left in the V....
    1
  486. If you have two different diameter tires (unevenly worn) on the driven axle, you will destroy the differential. Two rotation speeds for one forward speed.
    1
  487. 23:00 capitalism baby.
    1
  488. Ray, get a DSLR, these digital zooms are killing me....
    1
  489. Did you record the intro in the shower?
    1
  490. someone outta glue a few little levels on that bottom side of the plate on that trans-jack.
    1
  491. Is that a pressure sensor on the bottom of the tank mounted filter?
    1
  492. 8:25 the tires rotate whenever the car moves!!!!
    1
  493. you put the handle mechanism on the wrong side of the foam vapor barrier.
    1
  494. Good job on this diag/repair...I will say that small claims court is the only place this can go...and in the end probably not worth the time...the best way to get back is find out who did this and simply expose them. Just like the priesthood, while not all of them diddle kids, so many of them do it is hard to trust any of them. How many miles were on this thing? over 100K?...looks like 150K...that's some old transmission fluid.
    1
  495. it is cetane..."improves the air release properties"???? How much air is in your fuel? Does that bottle say anywhere on it how many basis points it raises the cetane? This is just the diesel equivalent of octane booster. and octane boosters generally raise the octane level of gas from say 91.0 to 91.3, or thereabouts.
    1
  496. overflow bottle plastic clip is on fan shroud...not radiator! I see the ziptie fix.
    1
  497. a car repair shop being lazy? Never@!!! C'mon Ray, this is America we take pride in doing the least amount of work for the most amount of money! Capitalism; this is the way.
    1
  498. Is this owner a smoker? WTF is all over the dash of that car? are those Epithelials?
    1
  499. Bad Credit Florida.
    1
  500. I watch Ray at 1.5 speed....sometimes I forget he is NOT always in a rush.
    1
  501. Like and subscribe so Ray can buy Philadelphia Brand Cream Cheese, and stop shopping at China-Mart...maybe go to Albertsons, or Publix
    1
  502. you are biologically and hormonally disposed to like your children...it will wear off around the 13th year.
    1
  503. what does the side of that car say...something something writing makes you look smart???
    1
  504. In the world of 1/4 inch torque wrenches, bicycle tools are King.
    1
  505. Seven minute soft opening....SNL vibes.
    1
  506. Did you CHECK PARK AID?
    1
  507. What happened to the corolla you took home?
    1
  508. The two most expensive things people buy, they have no idea how they work, and they don't care...homes, and cars btw. Humans are lazy or dumb or both, and now more than ever, they don't care.
    1
  509. Who is playing the soundtrack to heavy metal??? Do they play that on the radio in Florida?
    1
  510. 24:43 Thank you.
    1
  511. hahahah..I remeber your first video from this new shop...I predicted the effects the granite saw would have on you. Maybe put some sound insulating foam on the walls?
    1
  512. Dude, that is NOT coffee.
    1
  513.  @RainmanRaysRepairs  So many good coffee shops OFF the strip...STAY AWAY FROM THE STRIP.
    1
  514. Ray you are giving that troll a steak dinner.
    1
  515. It is chocolate at the top, and strawberry at the bottom...who knew Ford made milkshake machines.
    1
  516. These Duramaxs get Ray excited.
    1
  517. Hey tool people, why is that ratchet handle, 19:20, split down the center? What does that design provide for?
    1
  518. What about the check engine light?
    1
  519. Stupid people happen all the time...this is a new shop...not the dealer...Ray is keeping secrets!!!!!!
    1
  520. 28:37 "recess".
    1
  521. that man door opens the wrong way....the hinges are on the outside, it can be opened with a flat blade and a hammer.
    1
  522. Check your hand/wrist for a tick bite.
    1
  523. Did your apollo get a firmware update? The code screen is very different.
    1
  524. knowing the code is like step one in a multistep process. You need to see live data etc...if you just want to know the code any auto parts store will tell you for free.
    1
  525. Hey Ray, For these big insurance jobs would it be possible for you to let us know how many hours are billing for this work...and maybe the parts costs? I attempt the mental math while you work, but it never works out.
    1
  526. Ray please have one of your fans send you an actual coffee maker.
    1
  527. They fill radiator with washer fluid.
    1
  528. Where is the bug infested Corolla/Camry blown engine project?
    1
  529. Ray; Fix that corvette.
    1
  530. i can smell the inside of that car from here.
    1
  531. paint the area you just sanded...paint it please....ahhhhh. thank you.
    1
  532. buy 70K car...put $75 tires on it. I take that back those are Pirelli Scorpions, not Long Dong.
    1
  533. Ray what is "Steres"?
    1
  534. pretty sure the vapor barrier adhesive is Butyl.
    1
  535. I seem to recall old Nova's from the early 70's were notorious for crabbing down the road....
    1
  536. hmmmm...is there a panel under the back seat that gives access to the fuel pump?
    1
  537.  @RainmanRaysRepairs  That is such a simple engineering fix...but that car is from a time when GM was not really into engineering.
    1
  538. The zener diode in that fuse will not work. You are fired.
    1
  539. I do like Gree Cherokee.
    1
  540. what is the name of the company doing this conversion? They appear to have children doing there work..
    1
  541. Hopefully someone can give the car owner some life lessons in regards to living like a complete slob.
    1
  542. "the repo shefl on the tool truck"??? WHAT IS THIS?
    1
  543. Kill it with Fire.
    1
  544. A radiator does not seem to be the best choice for a drain pan....interesting choice.
    1
  545. if you rotate a circle 1/3 that is 360/3 which is 120 degrees...which is 33.3%
    1
  546. 4:37 Ray has an invisible trash can?
    1
  547. What is the washer fluid filter for?
    1
  548.  @RainmanRaysRepairs  I was being snarky because you took it out to pour in the fluid there-by rendering it useless.
    1
  549. You cant drop a "he fired himself" and then not tell the story!
    1
  550. Buy a Mercedes, but go to jiffy lube???? Being cheap is always expensive.
    1
  551. The brake fairy does not approve of painted floating calipers, brake fairy sabotage. Don't piss off the brake fairy.
    1
  552. If they take the time to copy the ridges on your key from a video, they can pick that 15 dollar lock with a pickset...door locks are for the people on the inside, not the people that want to get in.
    1
  553. Why did they poop in the radiator?
    1
  554. I do appreciate a quick and easy diagnosis and fix...but I am always enthralled by peoples automotive accoutrements. This Rouge, has not one, but two medieval torture devices mounted on the dash, a 4 inch meat cleaver hanging from the rear view mirror. An United States shaped United States flag, and a non functioning pint size disco ball...O and a business card prominently displayed on the dash for a commercial services company....and let us not forget, the baseball bat....is that a rosary hanging from the mirror as well?
    1
  555. I approve of the fluid exchange music.
    1
  556. that billion dollar snap-on computer does not have some sort of memory storage feature??
    1
  557. What about the abacus and slide rule....those really made people stupid.
    1
  558. What crappy tune posts a CEL?
    1
  559. Don't forget you can play these videos at up to 1.75 speed and still see everything, and understand everything...makes a 45 minute video 25 minutes long.
    1
  560. SO, blue gasket sealant on pan...old black sealant IN pan...and it looked like the windage try was missing a nut. I don't think you were the first person in there.
    1
  561. 18:00 you can see the threads falling apart...metal snow.
    1
  562. the first 3 minutes of this video are an add for Planned Parenthood.
    1
  563.  @RainmanRaysRepairs  you didn't get it...3 minutes of screaming kids would drive people to PP.
    1
  564. I really wanted you top open the airbox...there is a nice nest in there.
    1
  565. minor pet peeve...you do not need top hold down the start button, additionally for most new cars with key ignitions you don't have to hold the key in the crank position. I think Korean cars make you hold the key in crank...
    1
  566. keep the expansion clamp!!!!!!!!!!!!..o yes good...the benefit is the expansion clamp compensates for changes in temperature, while the screw clamp is static.
    1
  567. an entire cap when all you need is a gasket...
    1
  568. nice to see a realtor driving a car and not some dumb SUV.
    1
  569. in at 11:42, out at 14:13...and that includes waiting on parts...not bad.
    1
  570. Engagement
    1
  571. Is Donatos Pizza any good? You just gave them a 20 minute commercial.
    1
  572.  @jerg7942  No I am seeing the yellow arm of the lift smooshing the rocker panel of the car....try 7:45
    1
  573. “Reeeeee”.....
    1
  574. it really looked like the pins in that new sensor were all bent out of wack...
    1
  575. Finding employees with your work ethic is going to be the hardest part of this.
    1
  576. Hey Ray, I don't usually give you crap, but the brake fluid on the ground....that can get you in trouble.
    1
  577. W is Whiskey.
    1
  578. Ray did you register your new Ridgid driver and battery? Lifetime warranty!!!!
    1
  579. Interesting how "we", not me, keeping saying "politics" when talking about war. It is not politics, war is about killing people and breaking things...and if that is your idea of politics; you have never been involved in war.
    1
  580. 19:50 random florida man sighting.
    1
  581. 9:45 hearing you talk about a job I saw you do last week...time warp.
    1
  582. What is the threshold between small and large EVAP leak?
    1
  583. Whiskey, not winter
    1
  584. 18:51 is that fuel line about to come lose at the junction by the body?
    1
  585. based on that blinker sound...is there a light bulb out?
    1
  586. was that a goat farm?
    1
  587. new transmission at 100K miles....it must be a Jeep thing.
    1
  588. i bet your toothpaste tube looks like a murder scene.
    1
  589. explaining business is like explaining a joke, no one laughs after the explanation.
    1
  590. Florida man timing cover.
    1
  591. 10:34 don't leave those eggs there!!! 12:20...never mind
    1
  592. I bet last guy did not remove that access plug last time...hence the leak.
    1
  593. Was there a time when a ball joint replacement was not an a-arm/wishbone/control arm replacement?
    1
  594.  @Jordy-927  So you literally meant they should have completely redesigned a FWD platform into a RWD car?
    1
  595. Still think you need to rotate that desk 180....you are facing the wall.
    1
  596. Vibe/Matrix was built in GM's NUMI plant...which is now where Tesla's are built. NUMI was a marvel...read about it.
    1
  597. BLEEDER VALVE DUST BOOOOTTTTTTTTT
    1
  598. stop shopping at wal-mart ray.
    1
  599.  @RainmanRaysRepairs  yeah, it should have come with some insulation as well...my gut is telling me wrapping the coolant lines may have been the better option, but I am not there.
    1
  600. why does the top of the block have those cam shaft windows?
    1
  601. This thing must live at idle, as it has only has 11K miles and is on the 2nd oil change.
    1
  602.  @oldbatwit5102  Well, technically everything in the universe is made of star dust...
    1
  603. PAN IS EQUPPIED WITH A REUSABLE GASKET.
    1
  604. 24:39 GET THE TERMOMETER OUT OF THE VENT!!!!!!!!!!!!!!!!!!
    1
  605. Is that your fancy new Snap-on Scanner?
    1
  606.  @RainmanRaysRepairs  it is the 100th anniversary special edition!
    1
  607. CAES is a type of battery that uses off-peak or surplus electricity from the grid to produce energy. It does this by using that extra electricity to run a compressor which in turn generates heated compressed air. This air is stored inside a purpose-built underground cavity, where hydrostatic pressure pushes it back to the surface.
    1
  608. Whattt???? Blue is Better, Red is re-use, Metal is Mash it.
    1
  609. There is a detailing shop YouTube channel that is having convulsions right now.
    1
  610. why no H2O, NaHCO₃?
    1
  611. Oil pan alignment and torque critical see service manual.
    1
  612. My subscribe button is white....but I use dark mode like a sane person.
    1
  613. 43:40 I get why you did that, no complaints...but curious how the threads look the next time to you have to take that apart.
    1
  614. Ray, do you need a spring compressor? Did I miss hearing why didn't use one?
    1
  615. Klicken
    1
  616. Spot on, 6k on that car...it is sentimental.
    1
  617. What was the source of the oil leak on the bottom of the diff?
    1
  618. that jeep says it needs an oil change.
    1
  619. worst thing you can do for a lithium battery is constantly charge them to 100%. I am surprised the snap-on does not have a more sophisticated charger. Go to a hobby shop and buy a high end charger/conditioner.
    1
  620. That will be very effective at pushing over all the tall grass and small children this thing will be driving through.
    1
  621. This is now the only parts washer music you can ever play.
    1
  622. That guy in the background appears to be cleaning out the treads of a tire...
    1
  623. needs gasket/wx strip lube.
    1
  624. This is not the first time this truck has been on your channel....o wait this entire video is a re-run.
    1
  625. No link to your long lost buddy Derrick. Is this him? https://www.youtube.com/user/BJAM0608
    1
  626. Do you ever tell the customer you are posting the video of their repair? That is something I would appreciate as a customer.
    1
  627. When is the blue model T video?
    1
  628. I have never seen four bottles at once. 🤯
    1
  629. Permatex 24125: This product assures that critical brake parts remain lubricated throughout brake pad life. Resistant to corrosion and contaminants, it will not wash out. Compatible with internal/external brake rubber and plastic hardware, including ethylene-propylene rubber.
    1
  630. the sound of marble and granite being cut all day....man you are going to want some sound insulation.
    1
  631. Why doesn't he just buy a new frame? or a junkyard frame?
    1
  632. just when you think Ray can't get any more Florida Manish...you see the loveseat on the burn pile.
    1
  633. the rotors come from the manufacturer covered in machine oil, so they don't rust on the shelf. You need to clean that oil off before install, as you can imagine an oily rotor will not work very well. If you look at those rotors, the non working surfaces have a gray anti-corrosion paint on them.
    1
  634. it says Buick on the Grill.
    1
  635. Is that thing leaking from non-use? It looks like it has been in a garage for 6 years.
    1
  636. Teach this womans kid how to drive a manual.
    1
  637. days since no Mustang in the shop....0
    1
  638. 11:00 IS SOMEONE watching a CSW video?
    1
  639. Ray, How many of these are you willing to go through? I am curious as to when people think enough is enough and go somewhere else.
    1
  640. Why is that steering wheel so heavily lubed?
    1
  641. On a positive note, there is not one shopping center curb this jeep cant climb.
    1
  642. Carefully Ray, you are starting to sound like a socialist.,,😉
    1
  643. Thats 3, 5, 1 and 2, 4, 6.
    1
  644. I typed it, then I deleted it. Then I typed this instead.
    1
  645. This must be before you got the brake lathe....
    1
  646. I just got back from spending the weekend in Sarasota. Please avoid Florida Man as much as possible.
    1
  647. How long can an interior go without cleaning?
    1
  648. Happy kwanzaa Ray.
    1
  649. By not here right now, I mean it is two bays over in my tool box.
    1
  650. Tabaco Depot gets more airtime from you then if they had a commercial on TV.
    1
  651. I am having sympathetic gut punching mid-body pains watching you deal with the frustration of hard to reach bolts.
    1
  652. Who cut that floor jack in half?
    1
  653. Kill it with Fire.
    1
  654. Ray you speak slowly enough that your videos can be played at 1.5 speed (making you speak like a New Englander), effectively making your videos shorter.
    1
  655. She was using her six pack to clean her shades.
    1
  656. Why is that machine called leak "tamer"? It simply detects leak, it does not try to pacify the leak, nor get the leak to jump through a hoop. The name implies it is going to affect the leak in someway.
    1
  657. This is a broken system. You are required to be at the shop for a certain number of hours, but you are only paid for the number of tasks you perform. Would the shop let you leave when you are complete with the number of tasks you want to get paid for?
    1
  658. what is the difference, in microns, in the cat filter to the GM filter?
    1
  659. why is the fan shroud smaller than the radiator?
    1
  660. Ironman tires off, Aquaman tires on???
    1
  661. I am yelling at the screen...solder and crimp the wires in the clips!!!!
    1
  662. 22:38 Please teach him how to use a phone.
    1
  663. Did the owner break those studs, and then decided to let you finish?
    1
  664. But there is a green indicator that tells you the headlights are on when in auto mode (in many cars). the beams are angled down on that indicator
    1
  665. has that Water Pump been replaced before??? Is that a date written inside it...February 2017? Two water pumps in 80K miles??
    1
  666. radiator overflow is missing its cap....or is that the blue water box?
    1
  667. i would sell them a headlight restoration followed by PPF for lenses, that thing is casting shadows.
    1
  668. Will your shop send Pete to an ASE class?
    1
  669. apparatuses
    1
  670. That first oil pan bolt you removed was loose.
    1
  671. it was the inner fender liner snapping into its home.
    1
  672. 34:00 I am looking at the petcock and thinking...
    1
  673. O Florida, you still have people driving Hummers.
    1
  674. Does that kid have huge feet, or is she wearing someone elses shoes?
    1
  675. Yes Ray! a C5 with a 6 speed can get in the high 20MPGs...30 if you really granny it. Funny because I have a corvette, but it is a 1970 LS5.
    1
  676. Why does that bus bar have one post with no leads, and one post with two leads?
    1
  677. Does that thing have a bulb out somewhere?
    1
  678.  @rickbill4834  Yeah I was curious about that light on the dash...looked like TPMS, but had the bulb glow around it.
    1
  679. Nice....now weberauto needs to do an explanation video!
    1
  680. OMG, xmas is early Ray is PUMPING out videos like he pumped out children!
    1
  681. What is that jenky battery on your octane impact driver?
    1
  682. is it just me or did that seating that stud generate a lot of metal bits inside the lug nut? O yeah, the first two or three threads are gone...
    1
  683. two examples of the high cost of being cheap...or how expensive it is to be poor.
    1
  684. Ray, what tool do you feel is best for scratching inside your ears?
    1
  685. With the clips so close to your solder joint they are robbing a lot of your heat.
    1
  686. I bet your "wife unit" has a name.
    1
  687. The owner of that box truck is a completely dishonest and unethical person...if indeed he tries to get this warrantied.
    1
  688. 1/3 of a rotation is not 33.333 degrees, that would be less then 1/10th of a complete rotation....which maybe that was all it was doing.
    1
  689. 37:25 makes my sides actually hurt.
    1
  690.  @Forbidden_0ne  indeed, I wear shorts all year.
    1
  691.  @fintansky9369  only if he is white, or purple.
    1
  692. don't forget to plug in the fuel line.
    1
  693. It's a moisture barrier.
    1
  694. Tell the owner of that dodge the radar detector works better the higher it is mounted.
    1
  695. do you need the gate?
    1
  696.  @MrMustangMan  you are not Ray.
    1
  697. This is a rerun.
    1
  698. 10:46 6.5 what? That is in front of the overflow tank...this is going to bug me. 15:00 OK...so the last guy was helping out by writing 6.5 on the plastic cover...he left out the quarts part.
    1
  699. Please give Peter a hug and tell him he is a good person.
    1
  700. Seems like some hurricane shutters on that back porch would save you a lot of time/frustration???
    1
  701. cyanoacrlyate is not good for plastic...unless that is plastic specific CA...this was a job for plastic welding....sounds like you had plastic CA.
    1