Comments by "Dan\x27s Learning Curve" (@dans_Learning_Curve) on "DiagnoseDan" channel.

  1. Some rather rough probing of those terminals! Not the only one opened!
    11
  2. What's breaking/damaging this wire?
    10
  3. Ivan, thanks for asking this question! "If you're the smartest person in the room, you're in the wrong room!" Elbert Einstein
    5
  4. Oh, I just put two and two together! MEGER (Testing device) Mega OHM
    4
  5. Did the AC just quit working, or did it never work?
    2
  6. Dan mentioned how many other brands was this used in. That being said, it's probably not Audi's engineers that developed it. Still, there'll be some unhappy people.
    2
  7. Eric O has a great channel! Yes, please put me in the drawing.
    2
  8. <----- I have gone to some extra lengths to figure stuff out. However, I'm a diyer.
    2
  9. Flowcharts should be a guide! Brain needs to be engaged!
    2
  10. Almost 100,000subs!
    1
  11. When a starter is tapped on with a hammer, what changes to sometimes make it function? What in a starter could be hung up and not making contact? Is there anything in a relay that could be worked free with hammer blows? I have an answer. I want to see what others think 🤔
    1
  12. Is the harmonic balancer on the engine during a timing chain replacement? Are there marks on the crankshaft timing sprocket for TDC? If yes, one would think those marks would be used to verify timing.
    1
  13. "What part(s) would you like us to try replacing next?" Huge red flag!!
    1
  14.  @Diagnosedan  😁
    1
  15. Are the parts available to anyone? 🤔
    1
  16.  @johnnyblue4799  did the conversation to US dollars. $408.08.
    1
  17. I wasn't aware these engines existed!
    1
  18. Out takes are entertaining! LoL 😅😆 I expected an airbag to come out of the front of the car for the pedestrian protection! I guess popping up the hood......was the choice of BMW!
    1
  19. Like #446 Thanks for the video!
    1
  20. Algorithm boost!
    1
  21. I noticed no tach movement during engine cranking. Does this engine normally have tach movement during cranking?
    1
  22. I'm wondering what caused the damage to the wire's insulation to allow water access to corroded the copper? Assembly damage? Damage during another repair?
    1
  23. Another well produced video!
    1
  24. I replaced a head gasket on an older Honda Civic. Got the car running and then it wouldn't restart! May I post a link to a short video of proving it has fuel and spark?
    1
  25.  @Diagnosedan  https://youtube.com/shorts/wY3SCWqVw7E?feature=share
    1
  26.  @nickpappas4133  do you have a set fee for the calls from the shop you get?
    1
  27. THAT TOOLBOX! Organization!
    1
  28. It's interesting that the screen is totally missing from that hole. What did they do, assemble the gasket and then punch the holes? 🤔 Was the screen damaged allowing it to break free? 🤔 It would be fun to see an original gasket that hasn't failed yet, and look at the screen under magnification.
    1
  29. I'm a strong DIYer. Great job on the video! I was able to follow the process except for one thing. The power to the gateway module behind the glove box was restored when the comfort module was replaced? Did you try reprograming the old comfort module?
    1
  30. Chances are the previous module might not have been bad and the wire was beginning to fail? Unfortunately, that's probably water under the bridge.
    1
  31.  @Diagnosedan  sorry, did I miss that bit of information in the video?
    1
  32. Just submitted a request to join your Facebook group. Looking forward to it!
    1
  33. Like #611 Thanks for the video!
    1
  34. Great job teaching! AGAIN!
    1