Comments by "Ken Bode" (@kenbode8806) on "AMMO NYC" channel.

  1. Looking at the process I think it would make sense to have a room dedicated to this process with a good exhaust and filtering system to capture all the dirt and grime being removed
    95
  2. Great Video, the information provided is so true and DOI is a key term used throughout the Automotive Industry. I think the one thing that was not covered in this video when they were speaking about DOI is how the thickness of the clear coat has an effect on DOI. The more layers of crystal clear clear coat you have the higher level of DOI can be achieved. It is like a Piano Black Finnish, to achieve a piano black Finnish takes a extreme amount of detail when applying and polishing the finish to perfection but when you can achieve this finish the look is amazing.
    10
  3. Amazing restoration as always Larry. Time for a shop dog!!
    9
  4. Amazing work as always Larry, you and your team of experts did a amazing job! Thanks for sharing all the details
    9
  5. Amazing work as always Larry, look forward to seeing more of this collection get detailed! If your are up,for it I think you need to detail one of the buses!
    7
  6. Great Video, Larry and Kevin. You should bring Kevin with you to Detailer’s Domain event in a few weeks. You two work well together
    6
  7. Another great video as always, always like when you have Jason as I know you are going to take the project to the next level
    5
  8. Amazing work as always Larry!
    5
  9. As always Larry another great video but even better with the knowledge Kevin and you share together.
    5
  10. Amazing work as always Larry and the complete story is even more amazing! So glad you were able to save a car, give it to a very nice person who is going to restore the car and we’re able to raise money for a Charity,
    5
  11. Steam is a great sterilizer and is used in the medical industry every day to sterilize products that are manufactured. Steam is also used in Hospitals to sterilize medical instraments to be used in operating rooms. With that being said a steamer would work to sterilize surfaces but the question more is about the time required. For example when IV bags are manufactured this process takes over and hour in a vacuum chamber.
    4
  12. Amazing work as always Larry, at the same time what a amazing car collection
    4
  13. Amazing job as always: look forward to seeing you and Dan do more work on this collection!
    4
  14. Amazing detail as always Larry! Looked like a fun car to work on!
    4
  15. Thank you Larry and Mike for sharing all this great information
    3
  16. Another great video Larry, you and Christian did a amazing job.
    3
  17. Another great detail Larry! Happy Easter!
    3
  18. New Studio Looks Amazing!
    3
  19. Another amazing transformation by you and Dan! Great job as always!!!
    3
  20. Amazing job as always Larry!! I love the excitement at the end of the video when you get the car to start!!! Such a rewarding project!!!
    3
  21. Congrats Larry! Amazing detail as always!
    3
  22. Hi Larry, thank you very much for another Great Video
    2
  23. Not a big deal at all, we all make mistakes
    2
  24. Thank you Larry and Kevin, another great video as always. Love the Blooper ending!!!!
    2
  25. Another great video, Matt’s car came out looking great!
    2
  26. Another amazing transformation Larry!
    2
  27. Hi Larry, another great video as always. I look forward to receiving Frothe tomorrow.
    2
  28. Thank you very much for sharing Larry, Brian and his team at Fiibrenew did an amazing job.
    2
  29. Wow! Anther amazing video Larry, you and Derek killed it as always! Thank you for sharing!
    2
  30. Wow, what a amazing restoration of your 964. The attention to detail taken in each and every step of this restoration was first class. The team at J&B Body Works must be amazing to watch, as you can tell they have assembled one hell of a team.
    1
  31. aussiebloke609 , its like applying thin layers of shellac and polishing with pumice, very tedious and labor intensive. At one point I was GM'ing a company and we were doing custom gaming lids for Dell in a piano black Finnish. In this application we were working with a Bell Electro static paint system which would first apply a precise layer of Black then a layer of UV clear. In the end we still needed to buff every lap top lid to perfection by hand. It was not a product that was successful due to the labor cost to make such a laptop lid nor the quality rejects that we had to scrap due to fine dust particles getting trapped on the plastic parts, but the over all look was amazing
    1
  32. aussiebloke609 interesting did not know that was how a traditional piano finish was done. I knew there was a black laquer layer but thought there was a clear layers after. So a piano finish was done like a single stage paint on a car but allot more precise
    1
  33. aussiebloke609 thank you very much for sharing this detail. I really like to learn about different techniques. It would be great to try this technique on a piece of furniture I build.
    1
  34. Great Job Larry, you and Brett did an amazing job and Brett looked like he had fun.
    1
  35. Great Video, Thank you very much for sharing.
    1
  36. Killer video Larry, great seeing you working with Kevin, Jason & Dan on a project together again
    1
  37. I love the tribute to Spencer! Your videos with him have forced me to save for a Porsche and when I can afford it it will go to speed sport tuning to be modified
    1
  38. Amazing job as always Larry, Can't wait to see a finished car done.
    1
  39. Another great video my you and Kevin. Love all the finite details you are providing
    1
  40. Hi Larry, Congrats on the new car and thank you for sharing!
    1
  41. Wow, that was one amazing transformation in just two days
    1
  42. Great seeing the three of you together again!!!! As always amazing details!!!
    1
  43. Great job! It would be great if the customer would order a rubber floor to protect the paint and it would hold up better as a work truck and dog transport vehicle
    1
  44. The metal work in you building looks amazing!
    1
  45. If you have touchup that is raised above the level of the car paint, you can wet sand down the high spot then compound and polish to spot to try and blend the area. the key is to try and only wet sand the touch up and not the surrounding paint initially.
    1
  46. Ben’s designs look amazing!
    1
  47. As always Larry, another great video, it has to be a ton of fun working with these guys.
    1
  48. What a great thing you did for charity!
    1
  49. Another great video Larry.
    1
  50. Amazing transformation as always Larry. The price of these cars have gone insane!
    1
  51. Great to see Jason, Dan and you working on a amazing project. Nick had to love his car
    1
  52. Congrats Larry! Well deserved! Merry Christmas Everyone!
    1
  53. Great seeing Jason at the AMMO studio. Looking forward to seeing more videos with Jason.
    1
  54. As always another great video, always great to learn new things. Thank you for sharing Larry!
    1
  55. Great job by Dan and Larry!!! I think I would need to remove every panel and clean behind each panel before I would sit in that car.
    1
  56. Congrats on the new car, now you can drive in style and have heat and AC, LOL!!! Can't wait to test the new products.
    1
  57. Congrats Larry! The building looks amazing. I can’t wait to come up and attend a training session!
    1
  58. Thanks for making another great video Larry!
    1
  59. This is a amazing video, you and Dan did a amazing job!
    1
  60. Car came out amazing as always Larry! The color really pops!!!
    1
  61. Amazing job as always Larry, you and Dan killed it!
    1
  62. What a Amazing Collection!! Thank you for sharing Larry!
    1
  63. Wonder if a mixture of 110 and 210 would work for this application. I have watched Jason Kilmer and Knox do this. By doing this it reduces the amount of cut of the 110 and adds lubrication.
    1
  64. Nice job as always Larry!
    1
  65. Came out looking amazing! Sad that he needs to sell it.
    1
  66. Great Video as always Larry
    1
  67. Great Job as always Larry, Thank you for sharing!
    1
  68. Hi Larry, Thank you very much for sharing, the team at AI Design did an amazing job and I love the attention to detail they did especially on the rearview mirror.
    1
  69. Wow what a amazing car! What a amazing job as always!
    1
  70. Thanks for sharing this Larry, Another Great Video!!!
    1
  71. Hi Larry, As always another great video. It is great to know how important residue management is when working on interior trim and how when using smaller pads requires a increase in residue management control. The one thing that I think you need to point out to all your viewers is the makeup of these interior trim parts. Interior trim parts are not painted so you are not working with a standard clear coat. Interior trim either has a urethane top coat or a PMMA topcoat. Both of these topcoats are about 2 mils thick. One last thing depending on the film used by the automotive maker you can reflow these topcoats by using heat. This can remove scratches and increase gloss. If you want to know more about films used for automotive trim interior let me know. I would be happy to provide you with a detail course on this along with how these parts are made. Maybe we can even make a video about this. Best Regards, Ken
    1
  72. Hi Larry, Ok I will work on putting something together for you and I will email it over to you.
    1
  73. The Dream Team does it again, always the best video when you get to have Kevin, Jason and Larry work together.
    1
  74. Amazing work as always Larry, you have been cleaning a ton of extremely nasty cars lately. Again great job!!
    1
  75. Dan and you are so lucky that you get to work on these amazing cars! Congrats,
    1