Comments by "Michael Pressman" (@michaelpressman7203) on "Rainman Ray's Repairs" channel.

  1. Sometimes on a left hand nut it should be an indicator sometimes not just check the threads before you start horsing on stuff cuz I've done it myself have a good day
    5
  2. You also can use it to clean dirty or rusted parts
    5
  3. I usually don't point fingers or criticize but if you have to and I mean absolutely have to do that do not use a paper rag put some heavy heavy rags over so and break it loose let the pressure off and then when it let's go it'll blow the cooling hot coolant down towards the ground and not towards your face have a good day
    5
  4. I hate to say it but life is a health hazard you walk through it and do the best you can have a good day
    5
  5. Good thing you fixed it when you did or you could have done a replay of the guy with the bucket😂 Have a great weekend
    5
  6. The worst thing that happened on my 76 Blazer was wheel bearing came loose in the lockout would not disengage took it apart repacked the bearing put it back together did it in the street and everything worked fine have a great day
    5
  7. Great job diagnosis & correct assembly Have a great day
    5
  8. Yes last summer I got in the same situation pulled & tested the blower motor, resistor and head unit turned out that it was a relay that was hidden in the kick panel and thank goodness I found a good mechanic like you and they found the relay it was 98° have a great day
    5
  9. Excellent installation as usual Banks products and very well-engineered and design and manufacture to the top quality have a great day
    5
  10. Sometimes I think you ought to charge hazard pay just for how poorly the condition of the vehicles is but I don't know if the service ride is allowed for that have a good day
    5
  11.  @lexisnep525  sad thing people don't realize they're being played
    5
  12. I think you've got it the springs on the centrifical advance might have broken and then that's what's knocking noise the weights hit the inside of the distributor have a great day
    5
  13. We broke them like that at the dirt track especially if you got t-boned but that was a long time ago and that was heavy collision have a good day
    5
  14. Good morning I'm on my second cup of coffee to have a great day
    5
  15. A dead mouse missing it's head stuck in the condenser fan under the refrigerator... grabbed it by the tail chased my wife & I said in a little voice give me back my head
    5
  16. I have taken to nuts and threaded them tight back-to-back lock them on the stud and then cranked it out sometimes it works have a great
    5
  17. Yeah they tried to send me a prize it was a scam watch out have a good day
    5
  18. In an area where you have a lot of dust debris and bugs cleaning the evaporator fins externally and the condenser will help because they just get clogged up through time it's hard to get to but it's an easy process have a good day guys
    5
  19. I would like to think he did those things or some of them off camera have a great day
    5
  20. I was in the trade for 45 years and I've noticed the world has turned into a bunch of safety neurotics and I mean it's getting crazy have a good day
    5
  21. Personally I think of few things with misrouted before Ray even got under the hood and that's why the line rub through
    5
  22. Excellent job as usual and I agree with this fellow I try to go into the computer program and recalibrated you're probably still has to figure out where it's at and then take it from there if you can avoid the expense I understand but I would try to use the get into the system and figure out what's going on have a Merry Christmas and a Happy New Year
    5
  23. They call all the time!
    5
  24. I've had to use my head have a great weekend by the way wear a hat!
    5
  25. The flex pipe allows for high temperature thermal expansion 😂
    5
  26. Mechanical issues can sometimes be frustrating but they do follow logic & reason I can't say the same for dealing with people emotionally there's all kinds of variables and sometimes things just come out of left field I'd rather deal with mechanical things have a great day
    5
  27. They used to check tires & oil
    5
  28. Ray and wife unit real good about keeping an eye on the kiddos and I think his wife keeps the kids occupied in the office when he's got stuff in the air you know I wish more people to pay that much attention to the kids instead of have their face stuck in his cell phone letting the kids run rampant have a good day
    5
  29. There are a lot of people in the world that go around with limited gray matter capacity and it is due to either they're impaired or they're not working with a whole lot to begin with either way society suffers for these geniuses running around causing problems and hurting other people because they're inconsiderate self involved and they really don't care and on top of it it just stupid cheap hey sorry to unload but man some people in the world aggravate me to no end
    5
  30. Beam me up Scotty... there's no intelligent life here 😮
    5
  31. Got a kick on Lauren's face when you wanted to keep it,I know you were joking😂
    5
  32. That's the same thing with me in the trades for 45-50 years I always enjoyed overcoming something that some people would have walked away from that's town baby a regular the best
    5
  33. It's great the way you help Troy & teach him at the same time.That might not happen in another shop.
    5
  34. If the drive shift broke at the rear end it couldn't whip around enough to hit the starter motor if it did it would have beat up everything underneath that car and if the front broke loose it might hit the star tomorrow motor then those planted in the ground pole vaulted the rear end and broke it off I've seen it happen man the rear end of all about six feet in the air it's a fun ride not really hey have a good day
    5
  35. Sometimes I think he does trolling to mess with us😂
    5
  36. You got to go clockwise with your tape it won't peel off that way
    5
  37. I've never worked as a mechanic but I've done a lot of my own work for many years and I don't mind the ticket price but do what needs to be done don't send the vehicle out with sloppy work and the problem is not solved and then give me a story that aggravates me and I am anal though hey do it right or don't do it at all
    4
  38. ​ @shakerman55 They are comfortable till you drop something on your foot😂
    4
  39. That's one of the reasons you don't you stop leak on a cooling system and I think gray is going in the right direction he'll figure it out he knows what he's doing have a nice day
    4
  40. That is what makes me watch your jokes & sense of humor 😂
    4
  41. It was hard for me to not jump in on my son's 68 Chevelle 327 instead of letting him do it.
    4
  42. Planned obselecets​ @TimfromAlabama 
    4
  43. A long time ago in commercial air conditioning we used to use r12 and r r22 but some of the new stuff and does not work as good as the old stuff but people got excited then my contaminate the environment now this is what we have things don't work as good as the old stuff
    4
  44. He wants to be like the Master Have a great weekend 🎉
    4
  45. I personally like to use magnetic trays otherwise I will lose track of all my nuts and bolts have a great day
    4
  46. I agree about the rubber boot you don't want to have a dirty shaft have a good day
    4
  47. My bench used to look the same way and finally when I couldn't push the piles aside I decided to clean house have a good day
    4
  48. I bought my generator at harbor freight.If they hooked one up the lights would come on😂
    4
  49. I've had a sign on my toolbox for over 30 years it says if you value your hands keep them out have a good day
    4
  50. You take a dial gauge with a magnetic base and stick it to the rear axle housing or the pumpkin housing put the end of the dial gauge up against one of your gear teeth and hold the pilot bearing and rattle gear back and forth and you should get a reading of about in. 015 also if you want to mess with somebody take that high spot blue put it in the middle of a dollar bill folded in half and dropping on the shop floor and let them put it in their pocket that blue will be everywhere have a great day
    4