Comments by "Michael Pressman" (@michaelpressman7203) on "Rainman Ray's Repairs" channel.

  1. Coffee and Ray everyday makes my day have a great day
    4
  2. A radiator shroud might help😮
    4
  3. It would have made life a lot easier and the cover would not have to been totally removed have a great day
    4
  4. I have a skeleton that wears a tuxedo and a top hat called T-Bone and he dances in my driveway but bottom line was I was driving him home from work when it where I bought him and I pulled up along the side of guy and he screamed like a little girl and drove away quickly have a good day
    4
  5. As I've gotten older. Needs a totally different thing have a great day
    4
  6. I just installed an LED light bulb over my workbench 8000 lumens it's like daytime in there have a good day
    4
  7. Big rubber=big side load on bearings
    4
  8. Matter of fact I was just telling my wife I need more lumens in my garage have a great day
    4
  9. Glad to see they did a break-in and a refill I wish they would have put a drain plug on the front diff I understand the rear gets a lot more use but makes life a lot easier great job as usual hope the guy has fun with the truck thank you have a great day
    4
  10. I've had the same problems 😠
    4
  11. Coffee and Ray everyday makes my day I'm ready for my second cup thank you Ray have a good day
    4
  12. The bolt that was missing might be by the wire wheel on the bench grinder 😂
    4
  13. Changing motor oil on regular intervals is the best thing you could do for any motor
    4
  14. I remember when four wheel drive systems was simple you just had a shifter and lockouts modifications and all this electronic stuff just makes life a lot more complicated great diagnosis have a great day
    4
  15. A burr works too😂
    4
  16. Also on that power washing heater on the pump somebody been in there because it was one old clamp one shiny new one also those clips that were on the transmission lines with the same ones that used to be on 70s window cranks hey have a nice day bye
    4
  17. With all the sand in Florida I'd say it needs to be there otherwise it will act like lapping compound and eat up your drive shaft have a good day
    4
  18. Necessity is the mother of invention what ever works have a great day
    4
  19. White collar telling blue collars how to do their jobs
    4
  20. It's lack of integrity in the world. One way or another we all pay😠
    4
  21. I agree running around hunting for parts you know you have and tools drives me crazy
    4
  22. Move the seat up it will shift better 😂😅
    4
  23. Watching Ray has helped Me too😂
    4
  24. Glad you loader fixed Good 💡 with the chain extender 😂
    4
  25. I didn't see him use any today thanks for reminding me man you must be holding out on stock have a good day be going to stock don't they stock hose clamps in the shop everybody use them for everything I know it might break the bank have a good day
    4
  26. I agree I would save that room and I think all your ideas a good have a good day
    4
  27. The one on the "A" piller? 😂
    4
  28. That compresses & clamps the clutch that's why the fingers go in I would like to see the old clutch just out of curiosity I bet it was smoked have a great day
    4
  29. From an insurance standpoint that's a great idea I worked years ago as a journeyman electrician and certain things need to be done right this way if there's a problem in the future you don't end up footing the bill for damages have a great day
    4
  30. Started doing all my own work in the driveway with a jack it could be done it's just a matter of what you have to do certain things I can't do and won't do because I'm 69 years old have a great day
    4
  31. I did mind directly into the intake and throttle body after the turbo not before have a great day
    4
  32. At the old shop Ray found this problem and the owner had a fit & I got the feeling no body backed him up! Have a great day
    4
  33. Ray & Cody did an amazing diagnosis. How many shops could have done that,👍
    4
  34. If I can I avoid working on a running engine especially in tight quarters have a great day
    4
  35. Brass is the best I love the stuff hey have a good day bye
    4
  36. Tools are part of overhead and are the mechanics respondabley.
    4
  37. I have a cartoon in my toolbox that says anybody born before 1954 shouldn't work on a vehicle that's built after 1974 hey that's why they make wire cutters have a good evening
    4
  38. I had a 67 Impala 283 and I just think started seeming I got it home and it died in the parking spot started pulling plugs out my cousin said well check the plugs pulled out finally got to the back of the motor or the seven and eight hold seven out and it came out like a champagne Cork and antifreeze just spewed out then went over to eight and it did the same thing hold the heads had a busted head stud got the piece out put new head gasket had the heads deck both in the back together put all my fluids in and drove it and drove it for a long time remember when cars was simple made life easy and I did all this work in the street not in the garage hey those with a good old days buddy everybody have a good day
    4
  39. It's not right but some people have the mentality you touched it you broke it they just want stuff for free
    4
  40. Ray did.I used to pump the lifters while they were under the oil, but that was years ago
    4
  41. I want to vote for King Ray have a good day
    4
  42. Yes the best times I had with my son was years ago when we used to work on his 68 Chevelle and then his Z28 1976 race car we had a great time rolling in the dirt going in the mud it was all good
    4
  43. I understand the logic of the stores but I don't agree with Management's policies to send somebody out the vehicle it's not right only because they're not going to make a buck on it ain't right hey treat people right it'll come back to you hey bye
    4
  44. You'll figure it out I think the poor Jeep is just gone through years of sitting and needs a little TLC but you're the right man for the job I have faith in you don't worry you'll fix it have a good day
    4
  45. The problem is nowadays it's all about lawyers and liability if anything happens with that vehicle it will come back on Ray and his shop so it's got to go out 100% or not at all have a good day
    4
  46. My wife would bring me dinner 🥣 under the hood
    4
  47. It's like anything if you take decent care of the things you have they will serve you a lot longer have a good day
    4
  48. He's not the first mechanic I've heard voice and opinion on the waves of vehicles or assembled but especially with the PT cruises that nose is so narrow but I would have just pulled the the grill out and flipped everything forward got to it that way but that's just my opinion I'm not trolling you I'm not telling you what to do that's just me have a great day
    4
  49. I've spent my whole life working in the trades now I'm retired and I always felt it was my responsibility to help mechanically changed people not take advantage! Have a great weekend 🎉
    4
  50. As much damage was caused between the bearings and there's a lot more when the bearings go other things get wore out like brakes and axles and Ray knows more about it than I do it be easier just to replace the vehicle cuz it's going to cost a penny to fix it have a nice day
    4