Comments by "MrMustangMan" (@mrmustangman) on "Rainman Ray's Repairs" channel.

  1. 80 in/lbs = 6.66 ft/lbs
    2
  2. he knows..... that's what he said in the video....
    2
  3. agreed
    2
  4. totally agree with every word.!!!!!
    2
  5. Air conditioning compressors need a constant supply of oil to prevent catastrophic failure, and it’s the refrigerant that carries the oil through the system. That’s why car makers install a low pressure switch–to prevent the compressor from running if the system is low on refrigerant.
    2
  6. if i'm going thru all that trouble, it's getting new sensors........
    2
  7. Woop-woop! That's the sound of da police... Woop-woop! That's the sound of da beast....
    2
  8. R.I.P.
    2
  9. both cars are junk.....
    2
  10. do people always bring you their cars to get free service.???
    2
  11. i always open while hot..... just turn it REALLY slow.....
    2
  12. GEARWRENCH has a "Hand Bearing Packer - 2775D" device that you drop your bearing into and twist with a cap. *Packs 50 to 60 bearings without refilling *Transparent, impact resistant cup allows grease level check *Use on all cage-type roller and ball bearings up to 2" bore *Self-contained bearing packer saves time and can be used anywhere *No air line or grease gun required
    1
  13. no kidding.!!!!!!!
    1
  14. after seeing that spacer, i couldn't watch anymore....... pathetic, !d!0t owner.!!!!!!!
    1
  15. they don't impact the piston....
    1
  16. probably
    1
  17. mine has..... ❤
    1
  18.  @firstlast---  obviously it's not fine when the result is a short on the PCM/ECM from the harness... watch the spark at the end of the video....
    1
  19. because customer wants it changed....
    1
  20. yes.!!!!
    1
  21. no trouble codes
    1
  22. at first, i was wondering "who is that.???" 🤣
    1
  23. did she get mad.???
    1
  24. do you work for chrysler.?????
    1
  25. no joke
    1
  26. thats not ford, bro.... the control arms are worn out and need replaced
    1
  27. i hate those plastic clips.... 🤬
    1
  28. a great proportion of the state's residents are retired and on a fixed income.....
    1
  29. that bolt was a BEAST.!!!!!!!!!!!! wore me out just watching.!!!!!!!
    1
  30. i've never heard of that lube... is it better than PBlaster.???
    1
  31. don't forget the bleeder valve dust boots....
    1
  32. LoL
    1
  33. because these cars get moved all over the country via car auctions....
    1
  34. exactly....
    1
  35. just use coolant.... whatever your o-ring is sealing, is what lube to use.... oil filter gets lubed with oil, power steering lines with power steering fluid, etc....
    1
  36. because he doesn't trust any shops.... empty container means [to him] the shop didn't keep his good oil and use cheap oil....
    1
  37. carcinogen....
    1
  38. i knew that was going to break......
    1
  39. every single o-ring needs to be lubed before being installed.....
    1
  40. @Simr Khera why do you say 'dur' to everyone, you fvcking 🐓🍭....
    1
  41. yep
    1
  42. that connector must be a Dorman part.... 🤔
    1
  43. because it's shorting out.... 😢
    1
  44. i thought you were going to say there were TWO rubber gaskets under the oil filter..... 😂
    1
  45. instrument cluster stepper motor is faulty... i had 2 of them fail at 85k miles.... piece of cake to change out....
    1
  46. i have 113k on my '05....
    1
  47. because the wiring harness is shorting out.!!!!!!!! 😢
    1
  48. at least
    1
  49. yes
    1
  50. my mustang is an 05.... if his didn't sound like that after he changed the camshafts, he broke somethin' peeling out that day..... maybe the owner used the wrong timing mark.... "Position the crankshaft damper spoke at the 12 o’clock position and the timing mark indentation at the 1 o’clock position."
    1