Comments by "Arthur Samson" (@Rekuzan) on "Rainman Ray's Repairs" channel.

  1. I didn't know Ray was getting payed to play Tetris... Then again, that's pretty much all of us when working on late model vehicles.
    1
  2. He meant to say 'Crain Brainium', not quite back to normal yet....
    1
  3. COMPLAIN Complain complain! The belt was on upside down and ya dinna fix it; shame on you Ray, shame on you!
    1
  4.  @RainmanRaysRepairs  Yeeeeah, sometimes I have no filter....
    1
  5. One could say the weight on the lift is.....OVER 9000!!!
    1
  6. And this is why my instructors were so adamant about not using a screwdriver like a pry-bar; the metal goes all the way through the handle for a reason...
    1
  7. A Jeep on life support in your shop??? NOOOOooooo....that's a first! 🤣🤣🤣 Okay, tell us something new! Seriously, your shop OPENED on Project Jeep and is probably the hill it will die on!!!!
    1
  8.  @DavidRamey  $50 saddle on a $5 horse???
    1
  9.  @IR-nq4qv  LMFAO!!!! Gonna hafta remember that one! 🤣🤣🤣
    1
  10. Project jeep ~ Comment section canon fodder!
    1
  11. Six months in and he still hasn't hit the door-of-death; the REAL measure of his success!!! 🤣🤣🤣
    1
  12. Actually, textbook would have involved using the wiring diagram to determine which connector goes to which sensor instead of playing musical plugs....
    1
  13. 5:50 ~ I'm just surprised you don't carry around a pocket screwdriver; a little flathead with a magnet on the end of it; my auto instructors were always adamant about this because there is SOOOO much you can do with one of those things. Just keep it in your shirt pocket so it's always with you!
    1
  14. Carolina squat: they actually wound up making it illegal due to safety concerns. I think it's something along the lines of 'Front end can't be higher than 2 or 3 inches than the rear. The simple fact they had to pass a law...
    1
  15. What, no brake kleen? Kinda dissapointed...
    1
  16. You're just like me Ray; you'd actually be dangerous if you ever got organized!!! 🤣🤣🤣 Lookout world, we're both doing just that!
    1
  17.  @wza223-fo3mc  And you're the one who needs a history lesson because it started out as Duck tape
    1
  18. JUST unbolt the manifold, it's not that hard on those old Jeeps, and broken fasteners are easy to get to on the head.
    1
  19. Anecdote from back when I was turning wrenches: Me: "I broke this, need a new one..." (screwdriver) Snap-on guy: "What happened?" Me: "Blah blah blah A,B,C" Fills out paperwork, grabs me a new one, hands it to me. Snap-on guy "Okay, now what REALLY happened?" Me: "Blah blah blah X,Y,Z" Him: "You DUMBASS!!! .....see ya next week!"
    1
  20. Whoawaitwhut, it's been 2 YEARS since the zombie apocalypse bumper install? Wooooow, times flies man!
    1
  21. Aren't you STILL trying to recover from Helene???? Okay, the fuuuuuu????????
    1
  22. The only way to test an OBD I O2 sensor is on the bench with a torch and a multimeter to manually monitor the wave pattern.
    1
  23. Annnnnnd now I can't get the mental image of Ray doing Yoga out of my head...
    1
  24.  @larrykittell726  Milking the clock??? blink...blink You DO realize that's not how flat rate works, right? He's also the shop owner, soooo...
    1
  25. OG fans: "I miss the doodily-doos..." New fans: "What's a doodily doo?"
    1
  26. Okay, they're called Lorry's on the other side of the pond, but I digress. But still, anything is better than trying to Origami oneself into positions the human body was never meant to bend... (Yoga master vs. ASE certified tech with a few decades under their belt. Yoga master easily crawls under the hood, trying to plant their foot) ....that's not a load bearing structure.....that's a few hundred dollars if you break it....that's a few grand, try again....
    1
  27. Nandaiyo Baka Taicho!!! Eyeroll Australian, lol!
    1
  28. 'Mechanics Cars ALWAYS fixed LAST!' Forget about the choir Ray, yer preaching to the Pope on that one! SOOOOO many times, SOOOOO many memories, and that was a fairly constant theme!🤣🤣🤣
    1
  29.  @jjunderwood4095  It's how I did the clutch in my '97!
    1
  30. (REEEEEEEEEEEEEEEEEEEE) For God's sake Ray, clean your scan-tool's screen once in a blue moon! My OCD is going apeshit...
    1
  31. You should think about a vapor honing machine! They're not that expensive, 100% made in Murka, you can always trade up to a bigger model without losing value, and they work like magic!
    1
  32. Flat rate manual states 2.8 hours Ray "Hold my coffee!" [20 minutes later] The money Ray saved the customer by doing that will more than cover the cost of replacing that AC line; get ready for part 3!
    1
  33. Looks like 'Mount Silverado' has been downgraded to just a hill of parts!
    1
  34. Why didn't you just use one of the JM3 Oil Filter setups? This would have been the PERFECT opportunity, but yer all like, nope, I'll use the old oil filter wrench instead.... 😮‍💨😮‍💨😬😬😬
    1
  35. Sorry about that! My pet cricket has RLS...
    1
  36. If I didn't know any better, I'd SWEAR your G.P.S. was doing it on purpose...
    1
  37. I'd say get help, but yer just like me and are so far beyond it there's no point.
    1
  38. Actually Ray, they USED to use it on Airplanes, but this has led to de-icing issues & crashes in the past. Now a days it's a mixture propylene glycol and other stuff: 'Type II fluids are pseudoplastic, which means they contain a polymeric thickening agent to prevent their immediate flow off aircraft surfaces. '
    1
  39.  @RainmanRaysRepairs  It's absolutely fascinating stuff!
    1
  40. A Jeep on life support in your shop??? NOOOOooooo....that's a first! 🤣🤣🤣 Okay, tell us something new! Seriously, your shop OPENED on Project Jeep and is probably the hill it will die on!!!!
    1
  41.  @jostouw4366  🤣🤣🤣
    1
  42. SERIOUSLY RAY, GET A CARDBOARD BOX, POKE HOLES, PUT BOLTS IN HOLES!!! It's not Rocket Surgery duder!!!
    1
  43. In other news, a man in Florida... (What? We were all thinking it!)
    1
  44.  @gpsguidedsimpson  It does actually, and I thought about mentioning grease, but that's super messy, and bread is easier to clean out with a blow gun.
    1
  45. I find it a little surprising a '95 is still OBD because that's when Frod really starting to switch.
    1
  46. tl;dr = It's a rock solid Chevy that doesn't have a lot of little $hit falling off, and with a bowtie, that's key!
    1
  47. Bringing a 13mm socket to a 12mm fight!!!!
    1
  48. Not sure if anyone else noticed, but the tensioner pully for the serp belt looks about due for a replacement.
    1
  49. "WHY AM I DRILLING HOLES IN BRAND NEW PARTS???" Because you love you job so much you do it twice!!! [Sorry Ray, you kinda walked into that one...]
    1
  50. Once they finish painting the walls, and replace the insulation on the ceiling, that place will look like new!
    1