Comments by "Cole Spolaric" (@ColeSpolaric) on "Project Farm" channel.

  1. Test hearing protection and how well it reduces sound compared to rating. From my understanding, the decibel reduction rating isn't what you actually get.
    2
  2. How about testing battery shelf life and seeing if keeping them refrigerated actually makes them last longer?
    2
  3. Looks like you have a lifetime supply of garbage bags now
    2
  4. Yes to the more expensive ones and the Bluetooth ones. I'd also like to see those compared to the ones that the dealer would use.
    2
  5. You probably never could have imagined what this channel turned out to be!
    1
  6. I think a more accurate, although only slightly more accurate way, to measure the output is to dispense it directly into a cup on the scale. Measure how long it takes to get a set amount of grease. Use the timestamps when editing the video to see how long it takes. This takes out the error of the small time difference from starting the timer to starting the grease gun, and also the difference between when the clock his 30 seconds to when you take your finger off the trigger.
    1
  7. How about running an engineer on just Lucas oil?
    1
  8. Completely different direction, but how about testing mounting tapes?
    1
  9. I wonder what would have happened if you found a way to line it with a thick aluminum foil.
    1
  10. When are you going to test microscopes 😉😉
    1
  11. Nice test rig!
    1
  12. Considering that I waited to watch this video until after I got done cutting pavers with a brick chisel... How about testing chisels of all kind? Wood, metal, brick, etc
    1
  13. Rigid sure was a surprise there! It would have been interesting to see it compared to snap on since it seems like everyone on the internet bashes it.
    1
  14. wd40 makes several chain lubricants.
    1
  15. Wait.... No race ramps?
    1
  16. Angle grinders are kinda like everything is a hammer unless its a screwdriver, then its a chisel too
    1
  17. We need another engine destruction video! 😈
    1
  18.  @mrb5217  I very distinctly remember alumiweld because it's the only brand I knew about.
    1
  19. It would have been nice to see DeWalt s 60v enter the lineup! Probably would have been unfair, but who knows!
    1
  20. I would love to see all the nasty emails he gets from these companies 😂
    1
  21. Idk where you find these off brand tools, but it's fun to include them!
    1
  22. The "standard tire sizes" are an absolute joke. Unless you have a small car, 14 and 15 inch rims are uncommon. Some battery jumpers have a built in compressor. That leads me to my next test suggestion.... portable battery jumpers. Both total capacity and max jumping amps. For this video, it would have been interesting to see how well they did with a tire not mounted to the car.
    1
  23. Makes me real curious how the locking bar for a floor jack would hold up
    1
  24. Did my man really say H Two Zero? 😆
    1
  25. Umm, how are we testing Karchers sales data?
    1
  26. This week on project farm, we are going to move on from getting a grip to getting a jolt!
    1
  27. Todd has an evil supervillain laugh 😆
    1
  28. Test shovels. Root cutting ability, leverage strength, etc
    1
  29. Please test sonic tools
    1
  30. The amount of money you had to spend on screws alone! I hope YouTube is paying you well!
    1
  31. You so clearly live where they don't use road salt!
    1
  32. Have to ever run the lubrication tester without lubrication to see what you get for a wear scar and energy usage?
    1
  33. Harbor freight is such a crap shoot lol. You could make a channel just reviewing their products lol
    1
  34. Using your own vehicle to test products for our own good. You are the man!
    1
  35. I had this playing on my tv and couldn't hear the squeaking in most of them. I could hear the flopping sound. That rain testing rig was amazing though!
    1
  36. Thanks for including the prices!
    1
  37. I'm curious as to why you didn't go 50 to 1 ratio on all the tests?
    1
  38. Your excitement over cold oil flow gave me a good laugh lol.
    1
  39. Looked like the flow test was getting started unevenly by just a little bit. Didn't seem to matter in the end, but something to pay attention to
    1
  40. Wow, this is so much better than the last time. Your ability to design repeatable tests free of other variables is amazing. It would have been interesting to measure the stretch.
    1
  41. Testing corrosion resistance without mixing it with diesel is kinda pointless. It's possible that the additive is designed to work with the diesel fuel
    1
  42. Some of these batteries are made by other companies. I think they must test these batteries before putting the label on them. If you really want to take days, test D cell batteries!
    1
  43. How long did it take you to come up with all these tests?
    1
  44. Did you find all the cable ties that snapped and went flying? You're testing has come a long way since you started doing this! I love that you still put some fun into the end of the videos. Keep up the good work.
    1
  45. In surprised how badly Milwaukee got embarrassed in this one!
    1
  46. Royal purple actually surprised me after it has done terrible in other tests on this channel with other products.
    1
  47. Have you considered 2 videos a week? There is just so much more to test! I have no idea what your daily life is like though
    1
  48. Logically, bolts and nuts should be next
    1
  49. Now I want to see you run the best of these through an engine!
    1
  50. Instead of we're going to test that... We're going to make some dust!
    1