Comments by "Cole Spolaric" (@ColeSpolaric) on "Project Farm" channel.

  1. Use the other side of the funvolution to remove the rock chips. I have one of those made by another manufacturer that came with directions that tells you this.
    1
  2. If a DeWalt exec is watching this, they're probably going to raise the price on the HSS bits
    1
  3. You should have done this last month as a holiday gift idea video 😉.
    1
  4. How about testing charging cords and chargers. A bit out of the norm for the channel, but should be good none the less.
    1
  5. It looked like the blades were hitting spots that were just a bit harder in the first two tests throwing off the results a bit. But that spring steel really showed the Milwaukee isn't up to the other two blades. They make great power tools, but maybe not the best parts to use with them.
    1
  6. The Amazon Chinese alphabet soup ones are here just for our entertainment 😆
    1
  7. It would have been interesting to see what happened combining station removers that did better in specific categories.
    1
  8. I'd be curious how much CO and particulates the indoor propane heaters put out
    1
  9. It would have been interesting to buy 3 of everyone tested spread across 3 months and see the accuracy between each brand. Unfortunately that's just too much money
    1
  10. I'm glad to see you kept a lot of filler words like slightly up or slightly down out. Speeds things up a little bit.
    1
  11. A filter that has a larger width with will always be better for static pressure because it has a larger surface area to pull air through.
    1
  12.  @JasonNaughton  then that's like having no locks on your house at all since only bad people will break in regardless of a lock....
    1
  13. I'm wondering if LVL, LSL, or PSL lumber would be more consistent for testing. Even in the same board there is a lot of variation when it is natural lumber. You essentially had two variables here. The fastener and the wood.
    1
  14. It's always great when you get back to the start of this channel!
    1
  15. Converting an engine to run on propane and natural gas would be awesome to see!
    1
  16. I'm glad to see that you averaged the results and included the prices. It became obviously how much the results could differ for the same product.
    1
  17. With all these pliers you've been testing, your new catch phrase is going to be get a grip 😉
    1
  18. The ones that had press pins that failed to shear should have been in last place regardless.
    1
  19. You missed testing fiskars. That's definitely a popular brand that should be tested with any manual garden tools
    1
  20. If this isn't your daily job, it needs to be! I can't wait to see what comes out considering those reports were from November 30th. I'm guessing you have a lot you haven't edited yet.
    1
  21. I don't use chainsaws and I still came by to watch
    1
  22. I'm wondering if the adapters placed any additional resistance on the batteries. Was there any conditioning of the batteries (running them through say 10 battery cycles) done first?
    1
  23. You should never use one of these bases or acid! If they don't work and you or a plumber need to work on it, you or them could experience serious burns. Most clogs can be cleared with a snake!
    1
  24. Idk what you should try next, but once it's time comes, demolition derby it!
    1
  25. I wonder if there is anything that prevents phase separation? There has to be something that is sort of like an emulsifier. But binds water to gas instead of oil.
    1
  26. Well, scissor sharpeners seem to be the next logical thing to test!
    1
  27.  @phprofYT  if all his viewers contributed a couple bucks it would be no problem
    1
  28. We need a video of what harbor freight tools are legit and which ones are shit!
    1
  29. Need to test oil filters! Show us the before and after along with how well it did filtering.
    1
  30. A powered screwdriver test would be great. Test them for the ability to rotate a screw with the lowest as well as most torque. Some screws like those made out of brass can be stripped very easily. Other screws you want to tighten down hard. The one with the ability to do both well is the winner.
    1
  31. Just give me the old school cans where you just took the cap off the spout and the vent.
    1
  32. What about dexos certified oils. I'm curious to see how Pennzoil does. These are usually 0w something weights.
    1
  33. Always a great video when you return to the roots of this channel
    1
  34. How about you test the warranty claims of these brands after you break them?
    1
  35. I just have this random can of old oil lying around that I have no use for. I know what I'll do, I'll send it to project farm!
    1
  36. I would have liked to see the lubricity tester with the additive mixed with the fuel and after being frozen.
    1
  37.  @TheKnobCalledTone.  I call it Toyobi 🤣
    1
  38. This is a very hard one to test multiple batteries, but the only way to ensure accurate results. So I take these results with a grain of salt. It would also be nice to see after 10 discharge cycles how they do. I understand though that you don't take any money from sponsors and that getting more battery chargers/dischargers would be costly. I would buy them for you if I could afford them!
    1
  39. I believe it's pronounced ee-pay
    1
  40. No problem. I think we have all pronounced something that has others going what kind of crack is he smoking ?! I just don't like when someone lets me keep pronouncing it in whatever stupid way I have been doing so.
    1
  41. Have you tried running an engine on different percentages of isopropyl alcohol and hydrogen peroxide?
    1
  42. I would suggest weighting the different categories. Some things are more important than others.
    1
  43. I don't even weld and I want to see more welding videos. Laser welding is interesting, but I don't think you have $20k sitting around just for one of them
    1
  44. I would have liked to see a comparison to a file and a bench grinder. Also, how well did the sharpeners hold up after running the really damaged blades through them?
    1
  45. billiondollardan it's probably 10% ethanol. I don't see it posted at pumps anymore.
    1
  46. It would have been interesting to see performance after the teeth were damaged, but this video was long enough!
    1
  47. The crazy thing is that if you bought all the parts that make up the car it would cost you multiple times the cost of the car. Yet they can still make a profit selling the car. Tells you just how much makeup is on repair parts
    1
  48. This just proves that the claims made on the tool are only accurate when using a battery that probably wasn't provided with the tool. Shady marketing tactics you're uncovering here!
    1
  49. I love your videos, but with limited time, I do have to skip over stuff to get to what matters in the video, the results. Just wanted to pass it along just in case you pay attention to your video stats.
    1
  50. Channel Lock got a bad deal in this testing here
    1