Comments by "Random Acts of Video" (@Boodieman72) on "I Do Cars" channel.

  1.  @MannyC711  If you use cheap oil of course you have to change it more often. If you use a good oil it lasts much longer and saves money over the course of even a year.
    1
  2.  @paulspomer16  Haha. The lab I sent oil samples to would disagree.
    1
  3. You can skip the walnut blasting if you do something like a BG induction cleaning.
    1
  4. Overkill? Is that even possible?
    1
  5. Have you ever taken apart an engine that uses a dry sump setup?
    1
  6. Remember, safety last.
    1
  7. They would have to have driven it more than a semi truck does per year in order to get that many miles on since new, doing 40k a year. So my guess is 70K
    1
  8. Might just be gelled fuel "science experimant"
    1
  9. Maintenance, what's that?
    1
  10. Lack of maintenance, sad.
    1
  11.  @iadr  Carbon did hurt the engine, then it was left outside because it wouldn't turn over. Using a good quality fuel cleaner would have prevented it from getting this bad. I work in the automotive service industry.
    1
  12. People that own Rolls Royce and Bentley cars don't care about speed they care about comfort.
    1
  13. There is another way Eric, an endoscope.
    1
  14. Dealer serviced means the cheapest bulk oil available.
    1
  15. Maybe an idea to look into why the check engine light is on? :)
    1
  16. Never seen a V7 engine before, lol
    1
  17. Soon as you took off the valve cover, lack of maintenance.
    1
  18. For those mythbusters fans "Jamie wants big boom"
    1
  19. Did the European market get a different engine?
    1
  20. Someone messed up, at the engineering stage.
    1
  21. Are the heads going to be in another video?
    1
  22. Time to expriment with that BG Dynamic Engine Cleaner and Rinse Oil :)
    1
  23.  @ratdude747  The engine is already dead.
    1
  24. Yes, that's how the oil filter comes off.
    1
  25. Why was I expecting Eric to be sitting on the wrench when it suddenly broke free.
    1
  26. No need for parts that dent will come out from inside the fender.
    1
  27. Hard water used in the cooling system?
    1
  28. I have a feeling someone else messed with the head bolts.
    1
  29. Does that engine have pressed in cylinder liners?
    1
  30. Looks like pancake batter.
    1
  31. You'll have plenty of good parts to sell.
    1
  32. Get this man a plasma cutter....and an air hammer.
    1
  33. Mechanical over rev and is it possible this is a non interference engine?
    1
  34. Sounds like a manufacturing issue.
    1
  35. I had a 351 in my '93 F-150.
    1
  36. Wonder if this engine came from the old channel - Will It Blend
    1
  37.  @thomasfletcher760  You can see a review here: https://www.youtube.com/watch?v=_EUihNKCJXI. it includes Eric from SMA
    1
  38. It's car murder
    1
  39. A quick clean with a laser will get rid of that rust in the cylinder walls.
    1
  40. Would have been nice if you cleaned the pistons.
    1
  41. AstroTools if you want a pneumatic impact and Dewalt DCF961 if you want a battery powered one, based on the results from the Torque Test Channel here on the Youtubes.
    1
  42. When you spend all your money on a car that you can't afford routine maintenance.
    1
  43. Finally, an external combustion engine.
    1
  44. An engine with barnacles.
    1
  45. My Audi just killed its second engine, this time with a cracked piston.
    1
  46. I think it takes about 12 gallons give or take a gallon
    1
  47. I had a 2011 Prius and never had any mechanical issues.
    1
  48. The whole time, I'm wondering why there is a box labeled Chicken Tenderloins under the bench.
    1
  49. Manufacturing defect like all the other recalled 6.2L's. Why do companies like Honda and Toyota not have any issues with 0W-16 and 0W-8 oils?
    1
  50. There is the option to switch to a waterless coolant.
    1